Servo Gauge 854ATG

A compact, intelligent and reliable

Advanced Tank Gauge
The series 854ATG servo gauge is a very reliable, versatile and accurate
automatic tank gauge with a minimum of moving parts.
The present instrument range is designed for the measurement of all kind
of liquids in any type of storage tank. Operating pressures up to 40 bar
(4 MPa / 600 psig) and a very wide product temperature range can be handled.
Simple configuration and diagnostics are possible via the Portable Enraf
Terminal (PET) connected through a safe infra-red coupling or via Enraf
configuration software. The instruments are Explosion proof and certified
by the authorities for Weights & Measures.
The multi-functional instrument is modularly constructed. The option slot
for additional features allows the connection of temperature measuring
elements for spot- and average product temperature, as well as for
product temperature profiles.
Other options are full integration in a Hybrid Inventory Management
System (HIMS), analog level output, density measurement, product
interface, water/product interface measurementand Modbus output via
RS232C or RS485 for direct connection to other host control systems.
As tank gauging has evolved, the servo level gauge has become an
industrial standard all over the world. A true test of its quality is the
dependability and low warranty record that the ATG has maintained for
many years.
Benets
Simple Commissioning
Easy to install
Proven reliability
Multi-functional
Product sheet
Technical specications
Measuring specications
Measuring range : Standard 27 m (88 ft)
Optional 37 m (121 ft)
35 m (115 ft) (with measuring wire up to 150 m (492 ft))
Measuring accuracy level : < 0.4 mm ( 0.016 )
1)
Measuring accuracy interface : < 2 mm ( 0.08 )
2)
Measuring accuracy density : < 3 kg/m
3
( 0.19 lb/ft
3
)
3)
Measuring accuracy temp. : 0.1 C ( 0.18 F)
1) 4)
Sensitivity : 0.1 mm ( 0.004 )
1)
Repeatability : 0.1 mm ( 0.004 )
1)
Wave integration time : Programmable, three setpoints, between 0.5 s and 10 s
Mechanical
Flange : See Identication code, Pos 9, 10
Dimensions : See back page
Weight : Medium pressure version 16 kg (35 lb)
Chemical version 21 kg (46 lb)
High pressure version 26kg (57 lb)
Cable entries : 4 pcs NPT threaded
Environmental
Operating pressure : M and C version : up to 6 bar / 0.6 MPa (90 psi)
H version : up to 40 bar / 4 MPa (600 psi) (up to 25 bar / 2.5 MPa in acc. to PED)
Ambient temperature : -40 C to +65 C (-40 F to +149 F)
Protection class : IP 65 according to EN 60529 (NEMA 4)
Safety : Explosion proof
- II 1/2 G EEx d IIB T6 or EEx de IIB T6 or
EEx d [ia/ib] IIB T6 or EEx de [ia/ib] IIB T6 according to ATEX
- Class I, Division 1, Groups B, C and D, in acc. to ANSI / NFPA 70 (FM, USA)
Materials
Housing servo comp. & cover : All types cast aluminum Int. reg. AA A356 EN1706 AC-AlSi7Mg0,3
Drum compartment : M version cast aluminum Int. reg. AA A356 EN1706 AC-AlSi7Mg0,3
C & H version stainless steel ASTM A351, CF-8M, G-X6 CrNiMo 18 10 (1.4408)
Finish aluminum parts : Chromatized according to MIL-C-5541C
Measuring drum, drum shaft : Stainless steel (1.4401) EN10088 AISI 316
Measuring wire : See Identication code, Pos 12
Magnet cap : Stainless steel (1.3953)
O-rings : Drum cover Silicone / FEP (others NBR 70)
Electrical
Power supply : 110/130/220 V (+10% to -20%) and 230 V (15%), optional 65 V (+10% to -20%),
also suitable for 240 V (+10% to -20%)
Frequency variations : 50 Hz to 60 Hz (10%)
Power rating : 25 VA, I
max
= 2 A
Transmission
Type : Serial, ASCII coded, Bi-Phase Mark modulated (BPM)
Isolating voltage : > 1,500 V
Lightning protection : Full galvanic separation via isolating transformers
Protocol : Standard Enraf eldbus (GPU protocol)
Common mode rejection : > 150 dB
Cabling : Two conductors, twisted pair, R
max
= 200 / line, C
max
= 1 F
Transmission to
Portable Enraf Terminal (PET) : Infra-red, serial
Options
Alarm relay outputs : 2x SPDT, galvanically isolated, V
max
= 50 Vac or 75 Vdc, I
max
= 3 A
Density measurement : See Identication code, Pos 15 (with density displacer)
Analog level output : 4 - 20 mA (accuracy 0.1% full scale)
Input boards : Spot RTD, VITO probes for average temperature and/or water measurement,
HART

devices
Data transmission : Standard Modbus via RS-232C or RS-485
i.s. output for Tank Side Indicator (TSI)
Cable entries : Adapters available to t other sizes cable glands
HART

is a trademark of the HART Communications Foundation.

1)
Under reference conditions
2)
Difference product density 100 kg/m
3
(6.25 lb/ft
3
)
3)
(optional) with a density displacer and calibrated for density measurement
4)
With VITO temperature probe
Identication code
Pos 1 Application
U General purpose X W&M certied
Pos 2 Data transmission
E Enraf Biphase mark protocol (standard)
I i.s. Output for Tank Side Indicator (TSI) and Enraf BiPhase Mark (BPM) protocol
R RS232C GPU protocol (only when Pos 4 = B, C, G , J, M, U or Z)
S RS485 GPU protocol (only when Pos 4 = B, C, G, J, M, U or Z)
V RS232C standard Modbus (only when Pos 4 = B, C, G, J, M, U or Z)
W RS485 standard Modbus (only when Pos 4 = B, C, G, J, M, U or Z)
Pos 3 Display
A With display
Pos 4 I/O options
B Spot temperature Pt100 V Analog level output
C VITO temperature and/or water probe
W
Analog level output + VITO temperature and/or
water probe G Average temperature MIR interface + HART device(s)
J VITO temp. and/or water probe + HART device(s) X Analog level output + VITO temperature probe
M Average temperature MIR interface
Y
Analog level output + spot temperature Pt 100 +
VITO temp. and/or water probe + HART device(s) N Average temp. MIR interface + Analog level output
U Spot temperature Pt100 + HART device(s) Z None
Pos 5, 6, 7 Instrument designation
8 5 4 Servo gauge ATG
Pos 8 Pressure version
C Up to 6 bar 0.6 MPa (90 psi) if Pos 9, 10 = 11, 12 or 13
M Up to 6 bar 0.6 MPa (90 psi) if Pos 9, 10 = 21 or 22
H Up to 40 bar 4 MPa (600 psi) if Pos 9, 10 = 51, 52, 53 or 54 (25 bar according PED)
Pos 9, 10 Drum compartment & ange
mat. *) ange acc. to nish compatible with acc. to
1 1 ss 2 150 lbs rf ANSI B16.5 turning, Ra = 3.2 12.5 m DN50, PN20 rf ISO 70051
1 2
ss NW50 ND6 DIN 2501 turning, Rz = max. 40 m DN50, PN6 rf ISO 70051
form D DIN 2526
1 3 ss 2 150 lbs ff ANSI B16.5 turning, Ra = 3.2 12.5 m DN50, PN20 ff ISO 70051
2 1 Al 2 150 lbs ff ANSI B16.5 turning, Ra = 3.2 12.5 m DN50, PN20 ff ISO 70051
2 2
Al NW50 ND6 DIN 2501 turning, Rz = 40 160 m DN50, PN6 ff ISO 70051
form B DIN 2526
5 1 ss 2 300 lbs rf ANSI B16.5 turning, Ra = 3.2 12.5 m DN50, PN50 rf ISO 70051
5 2 ss 2 300 lbs rf ANSI B16.5 turning, Ra = 3.2 6.3 m DN50, PN50 rf ISO 70051
5 3
ss NW50 ND40 DIN 2501 turning, Rz = 40 160 m DN50, PN40 rf ISO 70051
form C DIN 2526
5 4
ss NW50 ND40 DIN 2501 turning, Rz = max. 16 m DN50, PN40 rf ISO 70051
form E DIN 2526 *) see also technical specications
Pos 11 Safety approvals
A ATEX Europe For other approvals please contact your
nearest Enraf ofce F FM USA
Pos 12 Measuring range & wire material
2 27 m (88 ft) AISI 316 K 37 m (121 ft) Hasteloy C22
A 27 m (88 ft) Hasteloy C22 L 37 m (121 ft) Tantalum
B 27 m (88 ft) Tantalum M 37 m (121 ft) Invar
C 27 m (88 ft) Invar N 37 m (121 ft) Platinum / 20% Iridium
D 27 m (88 ft) Platinum / 20% Iridium
9
35 m (115 ft) AISI 316
with 150 m (492 ft) wire length 3 37 m (121 ft) AISI 316
Pos 13 Purge connection
* Option not used L 1/4 BSP entry
Pos 14 Mains supply
A 220 V 50/60 Hz R 130 V 50/60 Hz
C 110 V 50/60 Hz S 65 V 50/60 Hz
K 230 V 50/60 Hz
Pos 15 Density measurement
D With servo density measurement * Option not used
Pos 16 Alarms
W With 2 programmable SPDT alarms Z No alarms
U E A Z 8 5 4 M 2 1 A 2 * A * Z Typical identication code
A 8 5 4 Your identication code
vW-IN-4416.876-Rev.6
v
W
-
U
S
-
4
4
1
6
.
8
7
7
-
R
e
v
.
6














































infra-red
coupling
Position of measuring wire with
displacer in top position.
2 cable entries 3/4" NPT
for non i.s. wiring.
2 cable entries 3/4" NPT
for i.s. wiring.
Ref. to the instr. code Pos. 9, 10
for the flanges available.
1/4"
free space
for IR
connection
233 mm (9 )
3/16"
82 mm (3 )
436 mm (17 )
3/16"
"
B
"
"
A
"
Hoisting eye
(7 )
(space needed to
remove cover)
7/8"
200 mm
(4")
100 mm
352 mm (13 )
7/8"
(1 )
3/4"
44 mm
184 mm (7 ) 427 mm (16 )
206 mm (8 ) 449 mm (17 )
1/4" 13/16"
1/8" 11/16"
M and C version
H version
"A" "B"
Field interface
854 ATG
Entis system
Cable specications Serial transmission
Number of wires : 1 twisted pair (pref. shielded)
Resistance : R
max
= 200 / line
Capacitance : C
max
= 1 F
Outputs
Modbus
4-20 mA for level
Two relay level alarms
i.s. Output for Tank Side Indictor
Digital transmission to
- indicators
- systems
Inputs
HART

devices
Spot temperature element
VITO probes for average temp.
and/or water bottom measurement