Scribd Logo
Upload

Welcome to Scribd!

  • 288 views

    Steam Turbine

    Uploaded by

    Yuiophjkl
    The document discusses the main components of a steam power plant including the boiler, turbine, generator and condenser. It explains how coal, gas or oil are used as fuel in the boiler to create steam and how the steam then powers the turbine which drives the generator to produce electricity before the steam is condensed in the condenser.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Steam Turbine

    Uploaded by

    Yuiophjkl
    288 views32 pages
    The document discusses the main components of a steam power plant including the boiler, turbine, generator and condenser. It explains how coal, gas or oil are used as fuel in the boiler to create steam and how the steam then powers the turbine which drives the generator to produce electricity before the steam is condensed in the condenser.

    Original Description:

    Introduction to the Steam Turbine

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the main components of a steam power plant including the boiler, turbine, generator and condenser. It explains how coal, gas or oil are used as fuel in the boiler to create steam and how the steam then powers the turbine which drives the generator to produce electricity before the steam is condensed in the condenser.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    288 views32 pages

    Steam Turbine

    Uploaded by

    Yuiophjkl
    The document discusses the main components of a steam power plant including the boiler, turbine, generator and condenser. It explains how coal, gas or oil are used as fuel in the boiler to create steam and how the steam then powers the turbine which drives the generator to produce electricity before the steam is condensed in the condenser.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 32

    EBB 4043 ELECTRICAL AND ENERGY SYSTEM

    LECTURE 2 STEAM TURBINE

    Objectives
    To identify the main part of steam power plant. To understand the working principle of steam power plant. To understand the layout of steam power plant.

    Classification of Power Plant


    Power plants using conventional (nonrenewable) sources of energy
    Steam power plant Nuclear power plant Diesel power plant Gas power plant

    Classification of Power Plant


    Power plants using Nonconventional(renewable) sources of energy

    4

    Hydro electric power plant Solar thermal power plant Wind powered generation(aerogeneration) Wave power plant Tidal power plant Geothermal power plant Bio-mass power plant Oceanthermal power plant

    Steam Power Plant


    Fuel : Coal / Gas /Oil Main parts : Boiler, Turbine, Generator

    How is electric power produced using oil, coal or natural gas?


    Steam Turbine Combined Power Plant (Gas Turbine and Steam Turbine) Gas Turbine Diesel Engine

    Principle of Steam Turbine

    Main parts of steam turbine

    Terminology

    10

    Boiler
    An important part of steam power production systems. The function of a boiler is to provide an enclosure in which pressurized water can be heated to a high temperature to produce steam. The heat from burning fossil is transferred to an area through which pressurized water flows - the water is converted to steam The transfer of heat within a boiler utilizes the three methods of heat transfer: radiation, conduction and convection.

    11

    Boiler
    The radiation method involves the movement of heat energy from a warm area to a cool area, and is dependent upon temperature difference and the ability of materials to absorb heat. The conduction method requires contact between the heat source and the heated area, and it relies upon the heat conductivity of the heated material. Convection is the movement of heat from a hot area to a cooler area by means of an intermediate substance, such as gas. Each of these three methods of heat transfer occurs in varying amounts, depending upon boiler design.
    12

    Boiler
    A boiler must functions properly as the boiler operation determines the quantity of steam available to produce the rotary motion of the turbine. When more power input for the generating process is required, because of an increased load on the system, the boiler must deliver more steam to the turbine. Boilers must be able to provide effective water circulation, efficient fuel combustion, and maximum heat transfer to the circulating water. The boilers used in most steam power plants today are called water-tube boilers. Their design consists of banks of tubes, separated by heat insulation where water is circulated through the tubes under high temperature and high pressure. Boiler design is very important for an efficient steam power plant operation.
    13

    Stocker Boiler

    14

    Boiler Coal/Gas/Oil

    15

    Boiler Gas / Oil

    16

    Boiler Auxiliary Systems


    There are several auxiliary systems used in a steam power plant to increase the operation and efficiency of the boilers. Among them are

    17

    Economizer Feedwater Heaters Preheater Superheater

    Economizer
    Economizers utilize the hot exhaust gases from the fuel reactions within a boiler to preheat the cold feedwater that is pumped into the boiler. Thus, the economizer uses the waste gases, which would otherwise be emitted through the exhaust stack, for an important purpose.
    18

    Feedwater Heater and Preheater


    Feedwater heaters and preheaters are used to increase the water temperature before its entry into the boiler. These systems heat the pumped feedwater by means of steam, which is circulated through the unit.

    19

    Superheater
    These units consist of banks of tubes located at the hottest area of the boiler. Steam flows through these tubes before its entry into the steam turbine. The purpose of the superheater is to cause the steam to reach a higher temperature so as to produce more energy in the steam turbine.
    20

    Turbine
    After steam has been produced, a rotary motion must be developed. This rotary motion is produced by a steam turbine. The rotor is usually divided into two parts the high pressure rotor and the low pressure rotor.

    21

    Turbine
    The low-pressure rotor is larger in diameter than the high-pressure rotor. Steam is channelled to the high-pressure rotor, and it is then routed to the lowpressure rotor. Steam turbines ordinarily achieve a maximum efficiency of less than 30 percent, but only when run at very high speeds.
    22

    Turbine

    23

    Expanded View of Turbine

    24

    Turbine Generator

    25

    Turbine Rotor

    26

    Condenser
    Condensers are used to cool the used steam that has passed through the steam turbine . Extraction turbines have a steam condenser operating under a vacuum to condense the steam not extracted for other processes. The condensate (condensed steam) is returned to the boilers to produce steam again. The unused heat from the condensed steam is rejected to the lake. Extraction turbines are able to meet variable steam load conditions and still maintain electrical production needs.
    27

    Condenser

    28

    Chimney fly ash

    29

    Cooling Tower

    30

    Steam Power Plant Animation

    31

    Pros and Cons


    Advantages of thermal power plant :
    Low initial cost Since located near the load centre, the cost of transmission and the losses due to transmission are considerably reduced. The construction and commissioning of thermal power plant takes lesser period.

    Disadvantages of thermal power plant:


    Fuel is a non-renewable source of energy. Efficiency decreases with decreasing load. Cost of power generation is high. Smoke produced by burning the fuel causes air pollution. Life of thermal power plant is 25 years. The efficiency decreases to less than 10% after its life period. Turbines has a high running speed of 3000 to 4000 rpm.

    32

    You might also like