0% found this document useful (0 votes)
216 views4 pages

GSM Sim 900A: Access Control Devices. Supply Chain Management

The document describes a GSM SIM 900 modem module. It operates in dual band 900/1800 MHz frequencies and connects via an RS232 interface with configurable baud rates up to 115200. It has a built-in TCP/IP stack enabling data transfer over GPRS. The modem supports voice calls, SMS, and internet access through simple AT commands. It is suitable for M2M applications such as access control and supply chain management. Testing involves connecting the modem to a PC using a serial-USB converter and sending AT commands to check functionality.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
216 views4 pages

GSM Sim 900A: Access Control Devices. Supply Chain Management

The document describes a GSM SIM 900 modem module. It operates in dual band 900/1800 MHz frequencies and connects via an RS232 interface with configurable baud rates up to 115200. It has a built-in TCP/IP stack enabling data transfer over GPRS. The modem supports voice calls, SMS, and internet access through simple AT commands. It is suitable for M2M applications such as access control and supply chain management. Testing involves connecting the modem to a PC using a serial-USB converter and sending AT commands to check functionality.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

1|P ag e

GSM SIM 900

An ISO 9001-2008 Certified Company Order Code RDL/GSM/13/001/V1.0

GSM Sim 900A


GSM/GPRS Modem-RS232 is built with Dual Band GSM/GPRS engine- SIM900A, works on frequencies 900/ 1800 MHz. The Modem is coming with RS232 interface, which allows you connect PC as well as microcontroller with RS232 Chip(MAX232). The baud rate is configurable from 9600-115200 through AT command. The GSM/GPRS Modem is having internal TCP/IP stack to enable you to connect with internet via GPRS. It is suitable for SMS, Voice as well as DATA transfer application in M2M interface. The onboard Regulated Power supply allows you to connect wide range unregulated power supply . Using this modem, you can make audio calls, SMS, Read SMS, attend the incoming calls and internet ect through simple AT commands.

Features
Dual band GSM/GPRS 900/1800MHz. Configurable baud rate. SIM card holder. Built in network status LED. Inbuilt powerful TCP/IP protocol stack for internet data transfer over GPRS.

Applications Access control devices. Supply chain management.

www.researchdesignlab.com

2|P ag e
GSM SIM 900

An ISO 9001-2008 Certified Company Order Code RDL/GSM/13/001/V1.0

Specifications
Parameter Operating voltage weight

Value
+12v DC

<140g

Pin Specification
Pin 1 2 3 4 5 6 7 8 9 Name GND tx rx Line_r & Line_l Spk_p & spk_n Mic_p & mic_n DTR CTS RTS Details Power supply ground transmitter receiver Line input Speaker positive & negative Mic positive & negative Data terminal ready Clear to send Request to send

Working
Unlike mobile phones, a GSM modem doesnt have a keypad and display to interact with. It just accepts certain commands through a serial interface and acknowledges for those. These commands are called as AT commands. There are a list of AT commands to instruct the modem to perform its functions. Every command starts with "AT". Thats why they are called as AT commands. AT stands for attention. In our simple project, the program waits for the mobile number to be entered through the keyboard. When a ten digit mobile number is provided, the program instructs the modem to send the text message using a sequence of AT commands Testing your GSM modem

www.researchdesignlab.com

3|P ag e
GSM SIM 900

An ISO 9001-2008 Certified Company Order Code RDL/GSM/13/001/V1.0

The GSM modem can be tested by connecting it with a PC. The modem is equipped with a RS232 cable. Just use a Serial to USB converter and connect it with the PC. Now you can proceed with sending the commands to the modem using any serial communication program like Hyperterminal, minicom etc. Ensure the serial parameters are configured to 8N1 and the baudrate is set to 9600bps. For each command you send the modem acknowledges with a message. Example: Just try sending "AT" to the modem. It sends back a result code "OK" which states that the modem is responding. If its not working fine, it sends "ERROR".

Sample Application
To view sample code and schematic click the below link: http://researchdesignlab.com/index.php/modules/gsm-sim-900.html

Board Dimensions
70mm

50mm

www.researchdesignlab.com

4|P ag e
GSM SIM 900

An ISO 9001-2008 Certified Company Order Code RDL/GSM/13/001/V1.0

To buy this product click the below link: http://researchdesignlab.com/index.php/modules/gsm-sim-900.html

To view the complete datasheet of SIM 900A used in GSM click the below link: http://forum.researchdesignlab.com/datasheet/SIM900A

www.researchdesignlab.com

You might also like