a

Solutions Catalog

2005 CommScope, Inc.

All rights reserved.
Visit our Web site at www.systimax.com or contact your local
SYSTIMAX Solutions representative or SYSTIMAX BusinessPartner
for more information. SYSTIMAX Solutions is a trademark of
CommScope. All trademarks identied by or are registered
trademarks or trademarks, respectively, of CommScope.
This document is for planning purposes only and is not intended
to modify or supplement any specications or warranties relating
to SYSTIMAX Solutions products or services.
09/05 MI 74

company

Table of Contents
Introduction to SYSTIMAX Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction to the Catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Copper Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Reference Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Copper Conductor Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Pair Colors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ISO Pin-Pair Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
T568 Outlet Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Patch Cord Order Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
GigaSPEED X10D Solution (Exceeding Category 6A) . . . . . . . . . . . . . . . . . . . . . . . 13
Channel Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Patch Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
GigaSPEED XL Solution (Exceeding Category 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Channel Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Patch Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
VisiPatch System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
PowerSUM Solution (Exceeding Category 5/5e) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Channel Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 53
Patch Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 55
Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 56
Additional Copper Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Ruggedized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Multimedia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Category 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
110 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
110 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Protection Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Fiber Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Reference Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Cable and Fiber Color Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Cable Sizing and Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Cable Constructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Cable Order Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Patch Cord Order Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
LazrSPEED Cables and Cords 50 micron Laser Optimized Multimode . . . . 91
Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Indoor/Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

Table of
Contents

Table of
Contents

TeraSPEED Cables and Cords Zero Water Peak Singlemode . . . . . . . . . . . . .117

Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Indoor/Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
OptiSPEED Cables and Cords 62.5 micron Multimode . . . . . . . . . . . . . . . . . . .133
Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
Indoor/Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Composite Fiber Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Outdoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Indoor/Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
InstaPATCH Plus System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
G2 Fiber Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Modular Shelves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
Panel Shelves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
Additional Fiber Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193
Fiber Connectors and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
LC Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
SC Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
ST Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
Fiber Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205
Fiber Tools and Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208
Advanced Connectivity Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
iPatch System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
AirSPEED/Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224
Power over Ethernet (PoE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230
Faceplates and Zone Box Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233
Faceplates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234
Zone Boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256
Equipment Frames and Cable Management Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .263
Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264
Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271
Cable Runway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283
Index/Part Number Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293

SYSTIMAX Solutions
Corporate Profile
SYSTIMAX Solutions is the global leader in structured connectivity solutions. Its parent company, CommScope Inc.
(NYSE:CTV), is the worlds largest manufacturer of broadband coaxial cable for HFC applications and a leading supplier of
high-performance fiber optic and twisted pair cables.

Warranty

The SYSTIMAX product portfolio includes some of the

industrys highest performing connectivity solutions for
voice, data, video and building management applications
in both wired and wireless enterprise networks. According
to independent research, SYSTIMAX Structured Connectivity
Solution (SCS) is the most widely used cabling system in the
world with over 1,000 miles (1,600 km) of SYSTIMAX cable
being installed every day in approximately 120 countries.

The SYSTIMAX Structured Connectivity Solutions (SCS)

20-year warranty is unique in that it provides applications
assurance as well as an extended product warranty.

Global Presence
Through a global network of approximately 2,000 highly
skilled BusinessPartners, SYSTIMAX Solutions has an
established track record in supplying some of the worlds
leading companies, including three-quarters of the
FORTUNE 500.

Key to the SYSTIMAX SCS success is its commitment to

manufacturing excellence and technological leadership
through the on-going work of SYSTIMAX Labs, its global
presence and reach, and its renowned 20-Year Extended
Product Warranty and Applications Assurance.

Global Solutions
The SYSTIMAX Solutions product portfolio includes: the
UTP copper SYSTIMAX GigaSPEED X10D Solution capable
of supporting 10 Gigabit Ethernet, the copper based
GigaSPEED XL Solution, the fiber optic LazrSPEED and
TeraSPEED Solutions, the intelligent patching iPatch
System, the pre-connectorized fiber optic solution
InstaPATCH Plus and the SYSTIMAX AirSPEED Solution, an
enterprise wireless LAN solution.

Global Locations
SYSTIMAX Solutions is supported by over 1,000 people
covering more than 100 countries and has four main
manufacturing facilities around the world Omaha, NE
(USA), Bray (Ireland), Brisbane (Australia) and Jaguariuna
(Brazil). Across all four plants, quality control standards
are stringent and consistent in accordance with ISO-9001
certification.

SYSTIMAX Labs
SYSTIMAX Solutions prides itself on its technological
leadership, which is maintained by employing world-class
engineers and scientists. The SYSTIMAX Labs has a
remarkable track record in innovation with over 600 active
patents and applications worldwide. It aims to be the first
to market with next generation, innovative systems and has
consistently achieved that over the years with new Category
3, 4, 5 and 6 systems. SYSTIMAX Labs representatives are
active participants in every major standard-setting body
around the world.

SYSTIMAX
Solutions

Introduction to
SYSTIMAX Solutions Catalog
Introduction

SYSTIMAX SCS Subsystems

A premises connectivity system, or distribution system,

allows telephones, printers, personal computers (PCs) and
other communications devices to communicate with each
other. It does this by connecting them together through
a combination of cables, adapters, connectors and other
equipment such as wireless access points.

The complete structured connectivity solution can be divided

into six discrete subsystems. Each subsystem provides
modularity and flexibility; changes and rearrangements usually
take place in just two of the subsystems. Configurations for
different types of connectivity, for new applications, or for
new standards may also involve just a few subsystems.

A structured connectivity solution is a cohesive way of

organizing a connectivity system. The basic rules governing
a structured connectivity solution are:

The following six subsystems, when linked together, provide

a complete, integrated connectivity system:

It uses standardized media and layout for both backbone and horizontal cabling.

Work Area Subsystem

It uses standard connection interfaces for the physical

connection of equipment.

Backbone (Riser) Subsystem

Horizontal Subsystem
Equipment Subsystem

It supports equipment and applications of many vendors not just a single vendor. The cabling system is
independent of the vendors equipment, and thus, is
more flexible. This is known as "Open Architecture."

Campus Backbone Subsystem

Administration Subsystem

It has a consistent and uniform design. It follows a

system plan and basic design principles.
It is designed and installed as a total system. Cabling is
not just installed on an as-needed basis.

1
3

Work area

Horizontal

Backbone (Riser)

Equipment

Campus backbone

Administration

Work Area Subsystem

Equipment Subsystem

The connection between the Information Outlet (IO) and

the station equipment (such as PCs, telephones, printers and
video monitors) in the work area is the Work Area Subsystem.
It consists of cords, adapters, and other transmission electronics,
such as wireless access points, that permit the station equipment
to connect to the horizontal media via the IO.

The Equipment Subsystem consists of shared, common

communications equipment and the transmission media
required to terminate this equipment on connecting hardware.
The Equipment Subsystem is made up of the cable, connectors
and associated support hardware in an equipment room. These
are used to extend the common equipment circuits to the main
cross-connect wall field for connection to the SYSTIMAX SCS.

In SYSTIMAX SCS for Building Automation Systems, this subsystem is called the Coverage Area Subsystem, and equipment
typically includes smoke-, fire-, and temperature-sensing
devices.

Campus Backbone Subsystem

The Campus Subsystem extends the cabling in one building
to communication devices and equipment in other buildings
on the premises. It is the portion of the distribution system
that includes the transmission media and support hardware
required to provide an inter-building communication facility.
It consists of copper cable, optical fiber cable, and electrical
protection devices that are used to prevent surges on the
cable from entering buildings.

Horizontal Subsystem
The Horizontal Subsystem covers the distance from the Work
Area to the Telecom Closet (TC). It includes the IO and the
transmission media used to extend the outlet to the TC. Each
floor of a building is served by its own Horizontal Subsystem.
SYSTIMAX SCS supports the use of UTP cable and/or multimode optical fiber and 8.3 micron singlemode optical fiber
in the Horizontal Subsystem. The horizontal wiring is
terminated on an IO in the Work Area and on cross-connect
or interconnect hardware in the TC. The horizontal wiring
shall be a star topology with each Work Area IO connected
to a TC.

Fiber optic cable is often used as the Campus Backbone

medium because it is immune to Electromagnetic
Interference and Radio Frequency Interference (EMI and
RFI) and can extend the distance over which signals can
travel between buildings. Typically, the Campus Backbone
Subsystem connects buildings in the equipment rooms.

When UTP is used, SYSTIMAX SCS requires that individual

4-pair cables be run and terminated at each IO placed in the
Work Area. The maximum length of the horizontal cable run
is 295 feet (90 meters).

Administration Subsystem
The Administration Subsystem consists of the cross-connects
and interconnects that are made to join two subsystems
together or to assign common equipment circuits to subsystems that exist in the TC and equipment areas. Crossconnects and interconnects allow easy administration of
common equipment circuits for routing and rerouting to
various parts of a building or a campus.

Backbone (Riser) Subsystem

The Backbone (Riser) Subsystem is the portion of the
SYSTIMAX SCS that provides the main (or feeder) cable
routes in a building. It usually supplies the multiple circuit
facilities between two locations, especially where common
system equipment is located at a central point. The Backbone
(Riser) Subsystem consists of larger pair count copper cables
and optical fiber cabling along with the associated hardware
used to bring this cable to other locations. For communications
within a building, the Backbone (Riser) Subsystem connects
TCs to equipment areas. These areas may be a single main
equipment room or multiple equipment locations within
the building.

Cross-connects are made with hook-up wire or patch cords.

A hook-up wire is a short length of single wire, whereas a
patch cord contains several wires and has connectors at
both ends. Patch cords provide an easy way to rearrange
circuits without the need for the special tools required to
install jumper wires. Interconnects accomplish the same
purpose as cross-connects but use plug ended wires, jacks
and adapters instead of jumper wires or patch cords.
It is recommended that the Administration System use the
color coding for circuit labels and the circuit identification
parameters outlined in TIA/EIA 606.
This catalog contains all the components to fulfill the
requirements of each of the subsystems.

Introduction

SYSTIMAX Structured
Connectivity Solutions (SCS)
Introduction

10
7
8

9
7

3
1

2
4

4
5

LazrSPEED/OptiSPEED/TeraSPEED
1 Outdoor and indoor/outdoor cables
2 Fiber optic LIUs/489 FIU

fiber

3 Indoor and indoor/outdoor cables

4 Equipment frame and cable
management solution

copper

GigaSPEED X10D/GigaSPEED XL/PowerSUM

1 Protection products

6 1100/UMP/PATCHMAX patch panels

6 Plenum, Riser and LSZH indoor cables

2 Equipment frame and

cable management

7 Zone boxes

7 G2 fiber connectivity solution

3 VisiPatch System

8 Faceplates and multimedia outlet

4 110 System

9 Patch/work area cord

5 iPatch System

5 InstaPATCH Plus connectivity solutions

8 Outlets and faceplates

9 Patch/work area cord and media

adapters

10 AirSPEED wireless access point

Copper Solutions
Reference Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Copper Conductor Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Pair Colors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ISO Pin-Pair Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
T568 Outlet Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Patch Cord Order Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
GigaSPEED X10D Solution (Exceeding Category 6A) . . . . . . . . . . . . . . . . . . . . . . . 13
Channel Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Patch Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
GigaSPEED XL Solution (Exceeding Category 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Channel Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Patch Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
VisiPatch System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
PowerSUM Solution (Exceeding Category 5/5e) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Channel Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 53
Patch Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 55
Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 56
Additional Copper Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Ruggedized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Multimedia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Category 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
110 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
110 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Protection Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Copper
Reference

Copper Solutions Reference

UTP Cable
Copper Conductor Sizes
Copper
Reference

Gauge

Diameter

DCR

Diameter

DCR

19

0.0359 in

8.05 Ohms/1,000 ft

0.912 mm

26.4 Ohms/km

22

0.0253 in

16.2 Ohms/1,000 ft

0.643 mm

53.2 Ohms/km

23

0.0226 in

20.3 Ohms/1,000 ft

0.574 mm

66.6 Ohms/km

24

0.0201 in

25.7 Ohms/1,000 ft

0.511 mm

84.2 Ohms/km

26

0.0159 in

41.0 Ohms/1,000 ft

0.404 mm

13.5 Ohms/km

Pair Colors
The 4-pair UTP cable, pair color combinations are as follows:
Pair Number

1010 Cable Pair Colors

2010 Cable Pair Colors

61, 71, 81, 91 Series Cable Pair Colors

(T)ip

(R)ing

(T)ip

(R)ing

(T)ip

(R)ing

W-BL

BL-W

W-BL

BL

BL

W-O

O-W

W-O

W-G

G-W

W-G

W-BR

BR-W

W-BR

BR

BR

The 25-pair UTP cable, pair color combinations are as follows:

Pair
Number Colors

Pair
Number Colors

Pair
Number Colors

Pair
Number Colors

Pair
Number Colors

BL/W

BL/R

11

BL/BK

16

BL/Y

21

BL/V

O/W

O/R

12

O/BK

17

O/Y

22

O/V

G/W

G/R

13

G/BK

18

G/Y

23

G/V

BR/W

BR/R

14

BR/BK

19

BR/Y

24

BR/V

S/W

10

S/R

15

S/BK

20

S/Y

25

S/V

Color Codes:
Black

- BK

Blue

- BL

Brown - BR
Green

- G

Orange - O
Slate

- S

Violet

- V

White

- W

Yellow - Y

Information Outlet
ISO (International Standards Organization) Pin-Pair Assignment
To permit circuit administration at the cross-connects, signals for different services may appear on specified wire pairs. The 8-pin
IO is wired internally to make this happen. The 8-pin jack connects particular pins on the station side (the work area wiring) to
particular twisted-wire pairs of the building distribution cable (the horizontal wiring).
8-Pin IO
White/Blue
1

Blue/White

White/Orange
2

Orange/White

White/Green
3

Green/White

White/Brown
4

Brown/White

To Closet

110 C4
Connector Block
1

W/BL
BL/W
W/O
O/W
W/G
G/W
W/BR
BR/W

To Device

T568B

Example:
4

4 x UTP

Pair 1

Analog Voice

Pair 2

Data Transmit

Pair 3

Data Receive

Pair 4

Power

Pin #s

Cable Designation

T2

R2

T3

R1

T1

R3

T4

R4

Front View of 8-Pin Modular Jack

Copper
Reference

T568 Outlet Specifications

Copper
Reference

In the TIA/EIA 568B standard, there are two configurations for termination of the 4-pair cable. They are designated T568A and
T568B. The T568A wiring has pair 2 (orange) terminated on pins 3 & 6 and pair 3 (green) terminated on pins 1 & 2. The T568B wiring
just reverses the termination of the orange and green pairs. Although T568A and T568B wiring is supported for system registration,
SYSTIMAX SCS recommends use of the T568B wiring.
T568A PIN-PAIR ASSIGNMENTS
Pair 2

T568B PIN-PAIR ASSIGNMENTS

Pair 3

Pair 3

Pair 4

Pair 2

W/O BL W/BL O W/BR BR

W/O O

W/G G

Pair 1

Jack Positions

Pair 1

Pair 4

W/G BL W/BL G W/BR BR

Jack Positions

The SYSTIMAX M-Series Modules are available with T568B and T568A universal color designations.

10

Copper Patch Cord Product Identifier

Patch Cords
Cord Order Process

The Copper Patch Cord Product Identifier provides for a flexible ordering system. The various patch cords are orderable with a
14-character feature configuration coding system. It allows for many different combinations of plug ends, cordage types, colors
and lengths. However, as this product guide is global, regional portfolios differ. To confirm your region's offering, please contact
your account representative or BusinessPartner.

CPC
Copper
Patch Cord

Termination Two

Wiring Scheme

Cord Color

2
3
4
5
6
7
8
9
C
D

1
2
3
4

1 Black
2 Light Blue
3 Dark Gray
4 Spring Green
5 Ivory
6 Orange
7 Red
8 White
9 Yellow
A Sable
B Lilac
C Slate
K Pink
L Purple
M Green
N Beige
O Brown
Z Blue (D8PS only)

MGS Mod. Jack

GS8E RJ45
Unterminated
VisiPatch
D8PS RJ45
X10D/RJ45
110GS
Keyed GS8E RJ45
GS8E-IP-C
GS8E-IP-D

Termination One

Cordage Type

2
3
5
6
7
8
9
C
D

1
2
3
4
5
6
7
8
9
A
D
E

MGS Mod. Jack

GS8E RJ45
VisiPatch
D8PS RJ45
X10D/RJ45
110GS
Keyed GS8E RJ45
GS8E-IP-C
GS8E-IP-D

T568A
T568B
Pairs 1x4, 2x3
Special Wiring

1074E GS3 4-Pair

3071E LSZH Solid
1095 Solid w/Bisector
1074D 4-Pair Stranded
1074D 2-Pair Stranded
1074D 1-Pair Stranded
2071E Solid Plenum
1071E Solid Non Plenum
3074E LSZH Stranded
1081 Solid w/Flute
3095 LSZH X10D Solid
3075A LSZH Solid

Modular Jack Color

0
1
2
3
4
5
6
7
8
9

Not Applicable
Black
Blue
Gray
Green
Ivory
Orange
Red
White
Yellow

hhh
Length
001 1
002 2
003 3

050 50

100 100
300 ft max

Unit of Measure
F Feet
M Meters
N Inches

Example:
The CPC code for a GigaSPEED XL RJ45 to RJ45, Stranded PVC, 568B wired, red, 7-foot patch cord is: CPC3312-07F007

11

Copper
Reference

Copper
Reference

12

GigaSPEED X10D Solution

Exceeding Category 6A
1 Racks and cabinets
2 24-port SYSTIMAX UMP with
MGS500s

3 Optional zone box

with MGS500s

4 MGS500 outlet and faceplate

1091/2091/3091 UTP cable
GS117-10E equipment cord
GS10E patch cord
1

GigaSPEED X10D Solution

Features and Benefits:

Performance guaranteed to meet or exceed draft Category 6A/Class EA Channel Specifications to 500 MHz
Performance guaranteed up to 4 connections, up to 100 meters, in a 6-around-1 cable bundle configuration
Channel optimized using Modal Decomposition Modeling
Supports IEEE 802.3 10GBASE-T, 1000BASE-T, TIA-854-A 1000BASE-TX, ATM Forum CB1G plus other legacy LANs and
applications (Video, BAS)
Backward compatible with existing SYSTIMAX cable and connecting hardware

The GigaSPEED X10D Solution fully complies with the latest IEEE 802.3an task force guidelines link segment specifications for
10GBASE-T, in addition to the latest TIA/EIA and ISO/IEC Augmented Category 6/Class EA requirements.
The GigaSPEED X10D Solution will support up to 100 meter channel configuration with at least 4 connections and meet
PSANEXT, PSAELFEXT and Insertion Loss specifications extrapolated to 500 MHz per draft IEEE 802.3an. The Alien Crosstalk
performance of the GigaSPEED X10D Solution, which is crucial to successful 10 Gbps transmission, is guaranteed for the complete
channel (not just cable) across the entire swept frequency (1-500 MHz) and tested in a stringent 6-around-1 configuration that is
representative of worst-case installation conditions.
The GigaSPEED X10D Solution meets Category 6/Class E NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss extrapolated to
500 MHz per the ISO New Work Item Proposal (NWIP).
The GigaSPEED X10D components are fully backward compatible in terms of channel performance and installation techniques
to existing SYSTIMAX UTP solutions. The new and innovative cable design coupled with new connectors that follow similar
termination as the previous generations, installation of the complete channel is an evolution of previous SYSTIMAX solutions
with a revolution in channel performance.
The GigaSPEED X10D Solution is backed by the SYSTIMAX 20-Year Extended Product Warranty and Applications Assurance when
installed and registered by an authorized BusinessPartner.

GigaSPEED X10D products include:

4-Pair 1091/2091/3091 UTP Cables

24-Port UMP Modular Patch Panels
MGS500 Information Outlets
GS10E Patch and Workstation Cords

13

GigaSPEED
X10D

GigaSPEED X10D Specifications

SYSTIMAX GigaSPEED X10D Category 6A Guaranteed Channel Performance
Guaranteed Performance Specifications for GigaSPEED X10D Solution

GigaSPEED
X10D

Electrical Parameters

Guaranteed Channel Margins to

ISO/IEC 11801 : 2002
Class E (1 250 MHz)

Guaranteed Channel Margins to

Draft ISO/IEC 11801 Edition 2.1
Class EA (1 500 MHz)

Insertion Loss

5.0 %

2.0 %

NEXT

6.0 dB

1.0 dB

PSNEXT

7.5 dB

2.5 dB

ELFEXT

6.0 dB

6.0 dB

PSELFEXT

8.0 dB

8.0 dB

Return Loss

3.0 dB

0.0 dB

PSANEXT

N/A

0.0 dB

PSAELFEXT

N/A

0.0 dB

Insertion
Frequency Loss
PSANEXT PSAELFEXT NEXT ACR
(MHz)
(dB)
(dB)
(dB)
(dB) (dB)

Return
Delay
PSNEXT PSACR ELFEXT PSELFEXT Loss Delay Skew
(dB)
(dB)
(dB)
(dB)
(dB)
(ns)
(ns)

1.0

2.1

75.0

75.0

71.0

68.9

69.5

67.4

69.3

68.3

22.0

580

40

4.0

4.0

74.0

65.0

69.0

65.0

68.0

64.0

57.2

56.2

22.0

562

40

8.0

5.6

71.0

58.9

64.2

58.5

63.1

57.5

51.2

50.2

22.0

557

40

10.0

6.3

70.0

57.0

62.6

56.3

61.5

55.2

49.3

48.3

22.0

555

40

16.0

7.9

68.0

52.9

59.2

51.3

58.1

50.2

45.2

44.2

21.0

553

40

20.0

8.9

67.0

51.0

57.6

48.7

56.5

47.6

43.2

42.2

20.5

552

40

25.0

10.0

66.0

49.0

56.0

46.1

54.8

44.9

41.3

40.3

20.0

551

40

31.3

11.2

65.1

47.1

54.4

43.3

53.2

42.1

39.4

38.4

19.5

550

40

62.5

15.9

62.0

41.1

49.4

33.4

48.1

32.2

33.3

32.3

17.0

549

40

100.0

20.4

60.0

37.0

45.9

25.6

44.6

24.2

29.3

28.3

15.0

548

40

200.0

29.4

55.5

31.0

40.8

11.4

39.4

10.0

23.2

22.2

12.0

547

40

250.0

33.1

54.0

29.0

39.1

6.0

37.7

4.5

21.3

20.3

11.0

546

40

300.0

36.5

52.8

27.5

32.7

-3.8

31.3

-5.3

19.7

18.7

8.0

546

40

400.0

42.7

51.0

25.0

30.6

-12.2

29.1

-13.7

17.2

16.2

8.0

546

40

500.0

48.3

49.5

23.0

28.9

-19.4

27.3

-21.0

15.3

14.3

8.0

546

40

Guaranteed Channel Performance Margin for registered SYSTIMAX installations performed by a SYSTIMAX BusinessPartner in accordance with the
GigaSPEED X10D Design and Installation guidelines.
Note: The table provides reference values only. All parameters comply with the governing equations given above over the entire frequency range.
All values and equations apply to worst-case channels utilizing 4-Pair 91A series cables with full cross-connects, consolidation points and
work area outlets (4 connections in a channel) for the length up to 100 meters.

14

Non Plenum 1091,

GigaSPEED X10D
Cable
The GigaSPEED X10D Solution includes a new type of 4-pair
cable, the 91 series. GigaSPEED X10D Solution is designed to
give channel performance exceeding Augmented Category
6 channel specifications, and in addition has substantially
improved Alien Crosstalk performance.
The cable design has been dramatically enhanced using
the SYSTIMAX Labs Cable Twist Accuracy Technology. The
91 series cables incorporate a round smooth shape that
speeds the handling and termination process and minimizes variation in
Alien Crosstalk performance. The cables have been designed to withstand
an aggressive 6-around-1 channel test that SYSTIMAX Labs believes to be
the most challenging test configuration representative of real life installations
including large cable bundles. This is a Powersum computation of the Alien
Crosstalk noise from 24-pairs of 6 channels surrounding a single 4-pair channel.
The 91 series cables have been specified out to 550 MHz to support high
bandwidth applications operating at 10 Gbps.

Features and Benefits:

GigaSPEED
X10D

Can support network line speeds up to at least 10 Gbps

Qualifies for the SYSTIMAX 20-Year Extended Product
Warranty and Applications Assurance when included as
part of a registered SYSTIMAX GigaSPEED X10D channel

Electrical performance guaranteed to meet or exceed

the channel specifications of the proposed TIA
Augmented Category 6 and ISO/IEC Class EA up to
500 MHz when used as part of a GigaSPEED X10D
Channel in registered SYSTIMAX installations
4-pair construction with finned inner jacket surface and
bisector center member provides the extra margin of
performance required for high bandwidth applications

Physical Specifications:

Electrical Specifications:

Weight: 41.5 lbs/1,000 ft (18.82 kg/304.8 m)

Nominal Jacket Thickness: 0.057 in (1.45 mm)
Nominal Outside Diameter: 0.315 in (8 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 66%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Maximum Mutual Capacitance at 1 KHz: 6 nF/100 m
UL and cUL: CMR, CMG

Product Number

Pair Count

Color

Length

Package

Material ID

1091004ABL R1000

Blue

1,000 ft (305 m)

Reel

760021683

1091004AYL R1000

Yellow

1,000 ft (305 m)

Reel

760021725

1091004ASL R1000

Slate

1,000 ft (305 m)

Reel

760021709

1091004AWH R1000

White

1,000 ft (305 m)

Reel

760021717

1091004AOR R1000

Orange

1,000 ft (305 m)

Reel

760021733

1091004AGN R1000

Green

1,000 ft (305 m)

Reel

760047597

1091004ARD R1000

Red

1,000 ft (305 m)

Reel

760047589

1091004AOR R3000

Orange

3,000 ft (915 m)

Reel

760027185

1091004AYL R3000

Yellow

3,000 ft (915 m)

Reel

760027177

1091004ABL R3000

Blue

3,000 ft (915 m)

Reel

760027144

1091004ASL R3000

Slate

3,000 ft (915 m)

Reel

760027151

1091004AWH R3000

White

3,000 ft (915 m)

Reel

760027169

1091004A1BL R1000*

Blue

1,000 ft (305 m)

Reel

760024901

1091004A1WH R1000*

White

1,000 ft (305 m)

Reel

760024919

1091004A1SL R1000*

Slate

1,000 ft (305 m)

Reel

760024927

*Austel

15

Plenum 2091,
GigaSPEED X10D
Cable
The GigaSPEED X10D Solution includes a new type of 4-pair
cable, the 91 Series. GigaSPEED X10D Solution is designed to
give channel performance exceeding Augmented Category
6 channel specifications, and in addition has substantially
improved Alien Crosstalk performance.

GigaSPEED
X10D

The cable design has been dramatically enhanced using the

SYSTIMAX Labs Cable Twist Accuracy Technology. The 91 series
cables incorporate a round smooth shape that speeds the
handling and termination process. The cables have been designed to withstand
an aggressive 6-around-1 channel test that SYSTIMAX Labs believes to be the most challenging test configuration. This is a
Powersum computation of the Alien Crosstalk noise from 24-pairs of 6 channels surrounding a single 4-pair channel. The 91 series
cables have been specified out to 550 MHz to support high bandwidth applications operating at 10 Gbps.

Features and Benefits:

Can support network line speeds up to at least 10 Gbps
Qualifies for the SYSTIMAX 20-Year Extended Product
Warranty and Applications Assurance when included as
part of a registered SYSTIMAX GigaSPEED X10D channel

Electrical performance guaranteed to meet or exceed

the channel specifications of the proposed TIA
Augmented Category 6 and ISO/IEC Class EA up to
500 MHz when used as part of a GigaSPEED X10D
channel in registered SYSTIMAX installations
4-pair construction with finned inner jacket surface and
bisector center member provides the extra margin of
performance required for high bandwidth applications

Physical Specifications:

Electrical Specifications:

Weight: 46.3 lbs/1,000 ft (21 kg/304.8 m)

Nominal Jacket Thickness: 0.050 in (1.27 mm)
Nominal Outside Diameter: 0.308 in (7.82 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 68%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Maximum Mutual Capacitance at 1 KHz: 6 nF/100 m
UL and cUL: CMP

Product Number

Pair Count

Color

Length

Package

Material ID

2091004ABL R1000

Blue

1,000 ft (305 m)

Reel

760024190

2091004AOR R1000

Orange

1,000 ft (305 m)

Reel

760024232

2091004ASL R1000

Slate

1,000 ft (305 m)

Reel

760024208

2091004AWH R1000

White

1,000 ft (305 m)

Reel

760024216

2091004AYL R1000

Yellow

1,000 ft (305 m)

Reel

760024224

2091004AGN R1000

Green

1,000 ft (305 m)

Reel

760047571

2091004ARD R1000

Red

1,000 ft (305 m)

Reel

760042788

16

LSZH 3091,
GigaSPEED X10D
Cable
The GigaSPEED X10D Solution includes a new type of 4-pair
cable, the 91 series. GigaSPEED X10D Solution is designed to
give channel performance exceeding Augmented Category
6 channel specifications, and in addition has substantially
improved Alien Crosstalk performance.
The cable design has been dramatically enhanced using the
SYSTIMAX Labs Cable Twist Accuracy Technology. The 91
series cables incorporate a round smooth shape that speeds
the handling and termination process. The cables have been designed to
withstand an aggressive 6-around-1 channel test that SYSTIMAX Labs believes to be the most challenging test configuration. This
is a Powersum computation of the Alien Crosstalk noise from 24-pairs of 6 channels surrounding a single 4-pair channel. The 91
series cables have been specified out to 550 MHz to support high bandwidth applications operating at 10 Gbps.

Features and Benefits:

Can support network line speeds up to at least 10 Gbps

Qualifies for the SYSTIMAX 20-Year Extended Product
Warranty and Applications Assurance when included as
part of a registered SYSTIMAX GigaSPEED X10D channel

Electrical performance guaranteed to meet or exceed

the channel specifications of the proposed TIA
Augmented Category 6 and ISO/IEC Class EA up to
500 MHz when used as part of a GigaSPEED X10D channel
in registered SYSTIMAX installations
4-pair construction with finned inner jacket surface and
bisector center member provides the extra margin of
performance required for high bandwidth applications

Physical Specifications:

Electrical Specifications:

Weight: 42.8 lbs/1,000 ft (19.4 kg/304.8 m)

Nominal Jacket Thickness: 0.057 in (1.448 mm)
Nominal Outside Diameter: 0.315 in (8.001 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 66%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Maximum Mutual Capacitance at 1 kHz: 6 nF/100 m
Standards: IEC 60754 Part 2, IEC 61034 Part 2, IEC 60332 Part 3

Product Number

Pair Count

Color

Length

Package

Material ID

3091004ABL R1000

Blue

1,000 ft (305 m)

Reel

760023242

3091004AWH R1000

White

1,000 ft (305 m)

Reel

760023226

3091004ABL R3000

Blue

3,000 ft (915 m)

Reel

760023275

3091004AWH R3000

White

3,000 ft (915 m)

Reel

760023234

17

GigaSPEED
X10D

GigaSPEED X10D
Universal Modular
Patch Panel
SYSTIMAX Universal Modular Patch Panel is a 19 inch
rack mounted panel. It accepts up to 24 GigaSPEED
X10D MGS500 information outlets for patching and
interconnection in the telecommunications closet or equipment room.
This modular concept allows termination of outlets in the field, coupled with high density and the ability to integrate InstaPATCH
pre-terminated fiber modules in the same footprint, it is an ideal data center solution. It consists of a rack mounted base unit,
three slide-in modules with interchangeable front bezels, cable management brackets and a flip-down removable front cover for
close-out. The Universal Modular Patch Panel accepts GigaSPEED X10D and XL, PowerSUM, LazrSPEED and TeraSPEED apparatus.
GigaSPEED
X10D

The panels 1U height maximizes rack space. Color coding is possible by use of colored outlets.

Features and Benefits

The multimedia modules can be configured to support GigaSPEED X10D/XL, PowerSUM, LazrSPEED and
TeraSPEED pre-terminated fiber and coaxial outlets such
as RCA and S-Video
Three methods of labeling are provided: on the inside of
the front cover, on the rear of the base and on the front
of each of the bezels

Accommodates up to 24 GigaSPEED X10D MGS500

information outlets for easy termination of 4-pair copper
cables, in addition to coaxial outlets and S-Video and
RCA adapters
1U design maximizes rack space
Integrated cable management enables enhanced
cable routing
Modularity will support up to three multimedia modules

Physical Specifications:
Height: 1.72 in (4.4 cm)
Width: 19 in (48.3 cm)
Depth: 4.17 in (10.6 cm)

Detailed Description

Material ID

UMP 24-Port Panel Kit (Panel, Brackets, Tie Wraps Screws, Cover and three 8-Port Bezel Kits)

760026682

UMP Blank Panel Kit (Bezel Kits not included)

760026740

UMP 24-Port Panel without cover

760034710

UMP Cover Kit

760035501

UMP 8-Port Bezel Kit

760026716

Label Kit for UMP 24-Port Panel

760036079

18

MGS500 Series
GigaSPEED X10D
Information Outlet
The MGS500 information outlet, the latest result of many years continuous product
development at SYSTIMAX Labs, features patented crosstalk cancellation and
compensation techniques. The MGS500 connectivity, consistent at the panels and
outlet, exhibit huge improvements in high frequency crosstalk enabled via new
PWB (Printed Wiring Board) materials and compensation technology. In addition,
large improvements in connector Alien Crosstalk mitigation have been achieved
through new materials and PWB compensation enhancements. This connector
design excellence has been made possible by the SYSTIMAX Labs Connector Field Pattern Modeling
technology, coupled with the system level MDM tool enabling high frequency cross coupling effects to be eliminated.
GigaSPEED
X10D

Features and Benefits:

Universal design and label supports both T568A & B wiring

IDC connector terminations on rear of base allow quick
and easy installation of 22 to 24 AWG cable
Qualifies for the SYSTIMAX 20-Year Extended Product
Warranty and Applications Assurance when included as
part of a registered SYSTIMAX GigaSPEED X10D channel

Electrical performance guaranteed to meet or exceed the

channel specifications of the propsed TIA Augmented
Category 6 and ISO/IEC Class EA up to 500 MHz when
used as part of a GigaSPEED X10D channel in registered
SYSTIMAX installations
Snaps into standard SYSTIMAX M-Series faceplates,
surface-mount boxes, consolidation point boxes,
SYSTIMAX Universal Modular Panel (UMP) or FlexiMAX
panels. Can also be mounted either at 90 degrees
(straight) or 45 degrees (angled) in any SYSTIMAX
faceplate

Physical Specifications:

Dimensions: HxWxD: 0.8 in x 0.8 in x 1.2 in (2.0 cm x 2.0 cm x 3.1 cm)

Universal A/B labeling
Plastic Material: High-impact, flame retardant, thermoplastic
Flammability Rating: UL-rated 94 V-0
Operating Temperature: 14F to 140F (-10C to 60C)
Storage Temperature: -40F to 158F (-40C to 70C)
Humidity: 95% (non-condensing)
Contact Material & Plating: Copper alloy, 100 micro-inch (2.54
microns) bright solder over 100 micro-inch (2.54 microns) nickel
underplate. Insulation displacement connectors accept solid or
stranded wire
Nominal Solid Conductor Diameter: 0.016 in to 0.025 in
(0.40 mm to 0.64 mm) (26 to 22 AWG)
Nominal Stranded Conductor Diameter: 0.020 in to 0.025 in
(0.51 mm to 0.64 mm) (24 to 22 AWG)
Insulation Size: 0.030 in to 0.046 in (0.76 mm to 1.17 mm)
Insulation Types: All plastic insulates, including: PVC, irradiated PVC,
Polyethylene, Polypropylene, PTFE, Polyurethane, Nylon and FEP
Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold
plating over 100 micro-inch (2.54 microns) nickel underplate
Plug Retention Force: 30 lbs (133 N) minimum between modular
plug and jack
Plug Insertion Life: 750 minimum insertions of an 8-position IEC
60603-7 compliant plug
Plug/Jack Contact Force: 100 grams minimum per contact using
FCC approved plug

Electrical Specifications:

Insulation Resistance: 500 megaohms minimum

Current Rating: 1.5 A at 68F (20C)
Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,
contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to
exposed conductive surface
UL and cUL Listed

19

GigaSPEED
X10D

Product Number

Color

Material ID

MGS500-003

Black

760023556

MGS500-318

Blue

760023648

MGS500-112

Orange

760023564

MGS500-226

Green

760023598

MGS500-123

Yellow

760023572

MGS500-361

Violet

760023655

MGS500-270

Gray

760023622

MGS500-215

Cream

760023580

MGS500-262

White

760023614

MGS500-246

Ivory

760023606

MGS500-317

Red

760023630

20

GS10E
GigaSPEED X10D
Modular Patch Cord
The high performance GS10E modular patch cord family has a
patent pending plug design featuring a distinctive aqua sled and
anti-snag latch for easy and rapid field identification. The GS10E
plug exhibits a dramatic reduction in variation of performance
via the innovative plug design. As soon as the cordage enters
the plug from the rear, pairs are controlled and the untwisting of
pairs and nesting of conductors required in conventional plugs is thus avoided.
The GS117-10E cord is a single-ended version of the GS10E GigaSPEED X10D patch cord.
Patch cords are orderable using a 14-character feature configuration coding scheme which replaces the familiar 9-character
Material ID. This allows maximum flexibility for ordering many different combinations of plug ends, cordage types, colors and
lengths. Please use SYSTIMAX Copper Patch Cord Product Identifier (in Copper Reference Section) for ordering information or contact your SYSTIMAX BusinessPartner.

Features and Benefits:

Certified component of an integrated GigaSPEED X10D
Solution
Qualifies for the SYSTIMAX 20-Year Extended Product
Warranty and Applications Assurance when included as
part of a registered SYSTIMAX GigaSPEED X10D channel

Electrical performance guaranteed to meet or exceed

the channel specifications of the proposed TIA
Augmented Category 6 and ISO/IEC Class EA up
to 500 MHz when used as part of a GigaSPEED X10D
channel in registered SYSTIMAX installations
Can support network line speeds up to at least 10 Gbps

Physical Specifications:

Contact Material: Phosphor Bronze

Contact Plating: Gold 50 micro-inch (1.27 microns), nickel 100 microinch (2.54 microns)
Insertion Life: 750 minimum
Plug Material: Polycarbonate UL-rated 94 V-O
Operating Temperature: 14F to 140F (-10C to 60C)

Electrical Specifications:
UL and cUL: CM (cordage)

Product Number

Detailed Description

CPC Code

GS10E

X10D Double Ended Cord

CPC7732

GS10H-LSZH

X10D LSZH Double Ended Cord

CPC77D2

GS117-10E

X10D Single Ended Cord

CPC7432

21

GigaSPEED
X10D

GigaSPEED
X10D

22

GigaSPEED XL Solution
Exceeding Category 6
1 Racks and cabinets
2 VisiPatch System

3 1100GS3 PATCHMAX GS3/iPatch

modular patch panels

4 Optional zone box

with MGS400s
5 MGS400 outlet and faceplate

1071/2071/3071/1081/2081/
3081 UTP cable

117GS8E equipment cord

GS8E patch cord

GigaSPEED XL 7/8 Solution

Features and Benefits:

Performance guaranteed to meet or exceed Category 6/Class E Channel Specifications to 250 MHz
Performance guaranteed up to 6 connections in any length channel configuration up to 100 meters
Channel optimized using Modal Decomposition Modeling
Supports IEEE 802.3 1000BASE-T, TIA-854-A 1000BASE-TX, ATM Forum CB1G plus other legacy LANs and applications (Video, BAS)
Backward compatible with existing SYSTIMAX cable and connecting hardware

SYSTIMAX channels comprised of GigaSPEED XL passive products, are capable of delivering potentially in excess of 1.2 Gbps
to the workstation in accordance with application standards and are eligible for the SYSTIMAX SCS 20-Year Extended Product
Warranty and Applications Assurance.

GigaSPEED XL products include:

4-Pair 1071/2071/3071 UTP Cables

4-Pair 1081/2081/3081 UTP Cables
PATCHMAX GS3 and 1100GS3 Modular Patch Panels
MGS400 Telecommunications Outlets
GS8E Patch and Workstation Cords
110 VisiPatch System
110VP, 117VP and 119VP Patch Cords

23

GigaSPEED
XL

GigaSPEED XL7 Specifications

SYSTIMAX GigaSPEED XL7 Category 6 Guaranteed Channel Performance
Guaranteed Performance Specifications for GigaSPEED XL7 Solution

GigaSPEED
XL

Electrical Parameter
(1 - 250 MHz)

Guaranteed Channel Margins to

Category 6/Class E TIA 568B.2-1 and ISO 11801 Edition 2.0

Insertion Loss

5.0 %

NEXT

6.0 dB

PSNEXT

7.5 dB

ELFEXT

6.0 dB

PSELFEXT

8.0 dB

Return Loss

4.0 dB

Frequency
(MHz)

Insertion
Loss (dB)

NEXT
(dB)

ACR
(dB)

PSNEXT
(dB)

PSACR
(dB)

ELFEXT
(dB)

PSELFEXT
(dB)

Return
Loss (dB)

Delay
(ns)

Delay
Skew (ns)

1.0

2.0

71.0

69.0

69.5

67.5

69.3

68.3

23.0

580

30

4.0

3.8

69.0

65.2

68.0

64.2

57.2

56.2

23.0

562

30

8.0

5.4

64.2

58.8

63.1

57.7

51.2

50.2

23.0

557

30

10.0

6.0

62.6

56.6

61.5

55.5

49.3

48.3

23.0

555

30

16.0

7.6

59.2

51.6

58.1

50.4

45.2

44.2

22.0

553

30

20.0

8.6

57.6

49.1

56.5

47.9

43.2

42.2

21.5

552

30

25.0

9.6

56.0

46.4

54.8

45.2

41.3

40.3

21.0

551

30

31.3

10.8

54.4

43.6

53.2

42.4

39.4

38.4

20.5

550

30

62.5

15.6

49.4

33.7

48.1

32.4

33.3

32.3

18.0

549

30

100.0

20.2

45.9

25.7

44.6

24.3

29.3

28.3

16.0

548

30

200.0

30.0

40.8

10.8

39.4

9.4

23.2

22.2

13.0

547

30

250.0

34.1

39.1

5.0

37.7

3.5

21.3

20.3

12.0

546

30

Note: The table provides reference values only. All parameters comply with the governing equations over the entire frequency range. All values
and equations apply to worst-case channels utilizing 4-pair 71E series cables with full cross-connects, consolidation points and work area
outlets (4 connections in a channel) for any channel lengths up to 100 meters.

24

GigaSPEED XL8 Specifications

SYSTIMAX GigaSPEED XL8 Category 6 Guaranteed Channel Performance
Guaranteed Performance Specifications for GigaSPEED XL8 Solution
Electrical Parameter
(1 250 MHz)

Guaranteed Channel Margins to

Category 6/Class E TIA 568B.2-1 and ISO 11801 Edition 2.0

Insertion Loss

7.5 %

NEXT

7.0 dB

PSNEXT

8.5 dB

ELFEXT

8.0 dB

PSELFEXT

10.0 dB

Return Loss

Frequency
(MHz)

4.0 dB

Insertion
Loss (dB)

NEXT
(dB)

ACR
(dB)

PSNEXT
(dB)

PSACR
(dB)

ELFEXT
(dB)

PSELFEXT
(dB)

Return
Loss (dB)

Delay
(ns)

Delay
Skew (ns)

1.0

2.0

72.0

70.0

70.5

68.5

71.3

70.3

23.0

580

30

4.0

3.7

70.0

66.3

69.0

65.3

59.2

58.2

23.0

562

30

8.0

5.2

65.2

59.9

64.1

58.9

53.2

52.2

23.0

557

30

10.0

5.9

63.6

57.7

62.5

56.6

51.3

50.3

23.0

555

30

16.0

7.4

60.2

52.8

59.1

51.6

47.2

46.2

22.0

553

30

20.0

8.3

58.6

50.3

57.5

49.1

45.2

44.2

21.5

552

30

25.0

9.4

57.0

47.7

55.8

46.5

43.3

42.3

21.0

551

30

31.3

10.5

55.4

44.9

54.2

43.7

41.4

40.4

20.5

550

30

62.5

15.2

50.4

35.1

49.1

33.9

35.3

34.3

18.0

549

30

100.0

19.7

46.9

27.2

45.6

25.9

31.3

30.3

16.0

548

30

200.0

29.2

41.8

12.6

40.4

11.2

25.2

24.2

13.0

547

30

250.0

33.2

40.1

6.9

38.7

5.4

23.3

22.3

12.0

546

30

Note: The table provides reference values only. All parameters comply with the governing equations over the entire frequency range. All values
and equations apply to worst-case channels utilizing 4-pair 81A series cables with full cross-connects, consolidation points and work area
outlets (4 connections in a channel) for any channel lengths up to 100 meters.

25

GigaSPEED
XL

Non Plenum Category 6,

1071E GigaSPEED XL
Cable
The 1071E 4-Pair GigaSPEED XL cable meets or exceeds
Category 6/Class E attenuation and NEXT requirements in
ISO/IEC 11801, CENELEC EN50173 and TIA/EIA 568B. Further,
these cables are UL verified as Category 6. The 71E GigaSPEED XL
cables features a patent-pending thin and easy to remove
bisector tape that delivers the performance benefits of more
traditional fluted center members without the associated
stiffness and size.

Physical Specifications:
GigaSPEED
XL

Electrical Specifications:

Weight: 26.2 lbs/1,000 ft (11.88 kg/304.8 m)

Nominal Jacket Thickness: 0.022 in (0.559 mm)
Nominal Outside Diameter: 0.232 in (5.89 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 69%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.2-1 Category 6
ISO/IEC 11801: 2002 (Edition 2) Class E
CENELEC EN50173: 2002 (Edition 2) Category 6
UL and cUL: CMR

Product Number

Pair Count

Color

Length

Package

Material ID

1071004ESL R1000

Slate

1,000 ft (305 m)

Reel

700211923

1071004ESL R3000

Slate

3,000 ft (915 m)

Reel

760040097

1071004ESL W1000

Slate

1,000 ft (305 m)

We Tote

700211931

1071004ELB R1000

Light Blue

1,000 ft (305 m)

Reel

700211956

1071004ELB R3000

Light Blue

3,000 ft (915 m)

Reel

760040105

1071004ELB W1000

Light Blue

1,000 ft (305 m)

We Tote

700211964

1071004EYL R1000

Yellow

1,000 ft (305 m)

Reel

700211980

1071004EYL W1000

Yellow

1,000 ft (305 m)

We Tote

700211998

1071004ERD W1000

Red

1,000 ft (305 m)

We Tote

700212020

1071004ERD R1000

Red

1,000 ft (305 m)

Reel

700212012

1071004EWH R1000

White

1,000 ft (305 m)

Reel

700214208

1071004EWH R3000

White

3,000 ft (915 m)

Reel

760040089

1071004EWH W1000

White

1,000 ft (305 m)

We Tote

700212046

1071004EGN R1000

Green

1,000 ft (305 m)

Reel

700212053

1071004EGN W1000

Green

1,000 ft (305 m)

We Tote

700212061

1071004ELL R1000

Lilac

1,000 ft (305 m)

Reel

700212087

1071004ELL W1000

Lilac

1,000 ft (305 m)

We Tote

700212095

1071004EOR W1000

Orange

1,000 ft (305 m)

We Tote

700212103

1071004EOR R1000

Orange

1,000 ft (305 m)

Reel

700212111

1071004EBK W1000

Black

1,000 ft (305 m)

We Tote

700212129

1071004EBL R1000

Blue

1,000 ft (305 m)

Reel

760004697

1071004EBL W1000

Blue

1,000 ft (305 m)

We Tote

760004689

1071004EPK W1000

Pink

1,000 ft (305 m)

We Tote

760011858

1071004EDG W1000

Dark Gray

1,000 ft (305 m)

We Tote

760039602

1071004EIV W1000

Ivory

1,000 ft (305 m)

We Tote

760039628

1071004ESA W1000

Sable

1,000 ft (305 m)

We Tote

760039636

1071004EPR W1000

Purple

1,000 ft (305 m)

We Tote

760039644

1071004EBR W1000

Brown

1,000 ft (305 m)

We Tote

760039594

26

Product Number

Color

Length

Package

Material ID

1071 004EGR W1000

Gray

1,000 ft (305 m)

We Tote

760039610

1071 004EBE W1000

Beige

1,000 ft (305 m)

We Tote

760039586

1071 004E1SL R1000*

Slate

1,000 ft (305 m)

Reel

700214216

*Austel

Non Plenum Category 6,

1081 GigaSPEED XL
Cable

GigaSPEED
XL

The 81 series cables feature an innovative fluted design

which provides significant margin (headroom) (10 dB) above
the minimum Category 6 Near End Crosstalk (NEXT) and
Powersum NEXT requirements in TIA/EIA 568B. Further, these
cables are UL verified as Category 6.

Physical Specifications:

Electrical Specifications:

Weight: 28.4 lbs/1,000 ft (12.88 kg/304.8 m)

Nominal Jacket Thickness: 0.020 in (0.51 mm)
Nominal Outside Diameter: 0.262 in (6.65 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 69%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.2-1 Category 6
ISO/IEC 11801: 2002 (Edition 2) Class E
CENELEC EN50173: 2002 (Edition 2) Category 6
UL and cUL: CMR

Product Number

Pair Count

Color

Length

Package

Material ID

1081004ASL R1000

Slate

1,000 ft (305 m)

Reel

108680802

1081004ASL R3000

Slate

3,000 ft (915 m)

Reel

108744921

1081004ALB R1000

Light Blue

1,000 ft (305 m)

Reel

108680810

1081004ABL R3000

Blue

3,000 ft (915 m)

Reel

108744947

1081004ABL R1000

Blue

1,000 ft (305 m)

Reel

108680869

1081004AIV R1000

Ivory

1,000 ft (305 m)

Reel

108680877

1081004AYL R1000

Yellow

1,000 ft (305 m)

Reel

108680885

1081004ARD R1000

Red

1,000 ft (305 m)

Reel

108680893

1081004AWH R1000

White

1,000 ft (305 m)

Reel

108681115

1081004AWH R3000

White

3,000 ft (915 m)

Reel

108744939

1081004AGN R1000

Green

1,000 ft (305 m)

Reel

108681131

1081004ALL R1000

Lilac

1,000 ft (305 m)

Reel

108681149

1081004AOR R1000

Orange

1,000 ft (305 m)

Reel

108681156

1081004ABK R1000

Black

1,000 ft (305 m)

Reel

108744954

27

Plenum Category 6,
2071E GigaSPEED XL
Cable
The 2071E 4-pair GigaSPEED XL cable meets or exceeds
Category 6/Class E attenuation and NEXT requirements in
ISO/IEC 11801, CENELEC EN50173 and TIA/EIA 568B. Further,
these cables are UL verified as Category 6. The 71E GigaSPEED
XL cables features a patent-pending thin and easy to remove
bisector tape that delivers the performance benefits of more
traditional fluted center members without the associated stiffness and size.
The 2071E 4-pair cable is composed of bare solid copper conductors insulated with Fluorinated-EthylenePropylene (FEP). The core of twisted pairs is jacketed with a low smoke PVC. It conforms to the low flame, low smoke requirements of the NEC.
GigaSPEED
XL

Physical Specifications:

Electrical Specifications:

Weight: 29.1 lbs/1,000 ft (13.2 kg/304.8 m)

Nominal Jacket Thickness: 0.020 in (0.51 mm)
Nominal Outside Diameter: 0.224 in (5.69 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 71%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.2-1 Category 6
ISO/IEC 11801: 2002 (Edition 2) Class E
CENELEC EN50173: 2002 (Edition 2) Category 6
UL and cUL: CMP

Product Number

Pair Count

Color

Length

Package

Material ID

2071004EOR R1000

Orange

1,000 ft (305 m)

Reel

700210008

2071004EOR W1000

Orange

1,000 ft (305 m)

We Tote

700210024

2071004EWH R1000

White

1,000 ft (305 m)

Reel

700210032

2071004EWH W1000

White

1,000 ft (305 m)

We Tote

700208101

2071004EWH W1000

White

1,000 ft (305 m)

We Tote

700210073

2071004EBL R1000

Blue

1,000 ft (305 m)

Reel

700210081

2071004EBL W1000

Blue

1,000 ft (305 m)

We Tote

700208093

2071004EBL W1000

Blue

1,000 ft (305 m)

We Tote

700210115

2071004EYL W1000

Yellow

1,000 ft (305 m)

We Tote

700210123

2071004EYL R1000

Yellow

1,000 ft (305 m)

Reel

700210131

2071004EGN R1000

Green

1,000 ft (305 m)

Reel

700210156

2071004EGN W1000

Green

1,000 ft (305 m)

We Tote

700210164

2071004EGN R4500

Green

4,500 ft (1,372 m)

Reel

700210180

2071004ESL R1000

Slate

1,000 ft (305 m)

Reel

700210198

2071004ESL W1000

Slate

1,000 ft (305 m)

We Tote

700214372

2071004ELL R1000

Lilac

1,000 ft (305 m)

Reel

700210206

2071004ELL W1000

Lilac

1,000 ft (305 m)

We Tote

700210214

2071004EBK R1000

Black

1,000 ft (305 m)

Reel

700210222

2071004EBK W1000

Black

1,000 ft (305 m)

We Tote

700210230

2071004ERD R1000

Red

1,000 ft (305 m)

Reel

700210248

2071004ERD W1000

Red

1,000 ft (305 m)

We Tote

700210263

2071004EPK W1000

Pink

1,000 ft (305 m)

We Tote

760011841

2071004E1WH W1000*

White

1,000 ft (305 m)

We Tote

760003228

*Austel

28

Plenum Category 6,
2081 GigaSPEED XL
Cable
The 81 series cables feature an innovative fluted design which
provides significant margin (headroom) (10 dB) above the
minimum Category 6 Near End Crosstalk (NEXT) and
Powersum NEXT requirements in TIA/EIA 568B. Further,
these cables are UL verified as Category 6.

Physical Specifications:

Electrical Specifications:

Weight: 31.3 lbs/1,000 ft (14.2 kg/304.8 m)

Nominal Jacket Thickness: 0.017 in (0.43 mm)
Nominal Outside Diameter: 0.233 in (5.92 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 72%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.2-1 Category 6
ISO/IEC 11801: 2002 (Edition 2) Class E
CENELEC EN50173: 2002 (Edition 2) Category 6
UL and cUL: CMP

GigaSPEED
XL

Product Number

Pair Count

Color

Length

Package

Material ID

2081004AWH R1000

White

1,000 ft (305 m)

Reel

108681172

2081004ABL R1000

Blue

1,000 ft (305 m)

Reel

108681180

2081004AGN R1000

Green

1,000 ft (305 m)

Reel

108681206

2081004AYL R1000

Yellow

1,000 ft (305 m)

Reel

108681198

2081004ALL R1000

Lilac

1,000 ft (305 m)

Reel

108681222

2081004ASL R1000

Slate

1,000 ft (305 m)

Reel

108681214

2081004ABK R1000

Black

1,000 ft (305 m)

Reel

108681230

2081004AOR R1000

Orange

1,000 ft (305 m)

Reel

108681164

2081004ARD R1000

Red

1,000 ft (305 m)

Reel

108681248

29

Low Smoke Zero Halogen,

Category 6, 3071E
GigaSPEED XL Cable
The 3071E 4-pair GigaSPEED XL cable meets or exceeds
Category 6/Class E attenuation and NEXT requirements in
ISO/IEC 11801, CENELEC EN50173 and TIA/EIA 568B. Further,
these cables are UL verified as Category 6. The 71E GigaSPEED
XL cables features a patent-pending thin and easy to remove
bisector tape that delivers the performance benefits of more
traditional fluted center members without the associated
stiffness and size.
3071E cable is composed of solid copper conductors insulated with
non-halogen high-density polyethylene and jacketed with a low smoke zero halogen compound.

Physical Specifications:
GigaSPEED
XL

Electrical Specifications:

Weight: 27 lbs/1,000 ft (12.25 kg/304.8 m)

Nominal Jacket Thickness: 0.021 in (0.53 mm)
Nominal Outside Diameter: 0.231 in (5.87 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 69%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.2-1 Category 6
ISO/IEC 11801: 2002 (Edition 2) Class E
CENELEC EN50173: 2002 (Edition 2) Category 6
IEC 754 part 2, Non-halogen based on pH and conductivity measurements
IEC 1034 part 2, Smoke emission
IEC 332 part 1, Flammability and flame retardant
NES 713: Toxicity index

Product Number

Pair Count

Color

Length

Package

Material ID

3071004EWH R1000

White

1,000 ft (305 m)

Reel

700216443

3071004EWH W1000

White

1,000 ft (305 m)

We Tote

700216450

3071004EWH R4400

White

4,400 ft (1,341 m)

Reel

700216476

3071004EBL W1000

Blue

1,000 ft (305 m)

We Tote

700216492

3071004EBL R1000

Blue

1,000 ft (305 m)

Reel

700216484

3071004E3WH R4400*

White

4,400 ft (1,341 m)

Reel

760006353

3071004E3WH R1000*

White

1,000 ft (305 m)

Reel

760006346

3071004ALL W1000*

Lilac

1,000 ft (305 m)

We Tote

108896564

3071004E3WH W1000*

White

1,000 ft (305 m)

We Tote

760011544

*IEC 332 Part 3 Compliant

30

Low Smoke Zero Halogen,

Category 6, 3081
GigaSPEED XL Cable
The 81 series cables feature an innovative fluted design
which provides significant margin (headroom) (10 dB) above
the minimum Category 6 Near End Crosstalk (NEXT) and
Powersum NEXT requirements in TIA/EIA 568B. Further, these
cables are UL verified as Category 6.

Physical Specifications:

Electrical Specifications:

Weight: 35 lbs/1,000 ft (15.88 kg/304.8 m)

Nominal Jacket Thickness: 0.020 in (0.51 mm)
Nominal Outside Diameter: 0.262 in (6.65 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 69%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.2-1 Category 6
ISO/IEC 11801: 2002 (Edition 2) Class E
CENELEC EN50173: 2002 (Edition 2) Category 6
IEC 754 part 2, Non-halogen based on pH and conductivity measurements
IEC 1034 part 2, Smoke emission
IEC 332 part 3, Flammability and flame retardant
NES 713: Toxicity index

Product Number

Pair Count

Color

Length

Package

Material ID

3081004AWH R1000

3081004ABL R1000

White

1,000 ft (305 m)

Reel

108687658

Blue

1,000 ft (305 m)

Reel

3081004AWH R3000

108687674

White

3,000 ft (915 m)

Reel

3081004ABL R3000

108687682

Blue

3,000 ft (915 m)

Reel

108687690

31

GigaSPEED
XL

Plenum Category 6,
GigaSPEED 4070 Limited
Combustible Cable
The SYSTIMAX GigaSPEED 4070 limited combustible cable meets
the TIA/EIA Category 6 and the UL limited combustible standards.
Jacketed and insulated with a FEP fluoropolymer resin, the cable
meets the stringent National Fire Protection Association (NFPA)
90A limited combustible requirements for low smoke generation
and flame spread. The superior combination of fire safety and
electrical performance makes 4070 an ideal candidate for applications requiring high speed, high bandwidth and high margin
of fire safety. The limited combustible cables are also resistant to
performance changes due to aging or environmental conditions,
totally recyclable, chemical resistant and heavy metal free.
See protection product section for Category 6 protector units.
GigaSPEED
XL

Physical Specifications:

Electrical Specifications:

Weight: 25.3 lbs/1,000 ft (11.48 kg/304.8 m)

Nominal Jacket Thickness: 0.010 in (0.25 mm)
Nominal Outside Diameter: 0.194 in (4.93 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

NVP (fastest pair @ 10 MHz): 71%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.2-1 Category 6
ISO/IEC 11801: 2002 (Edition 2) Class E
CENELEC EN50173: 2002 (Edition 2) Category 6
UL and cUL: CMP-50
National Fire Protection Association (NFPA) 90A

Product Number

Pair Count

Color

Length

Package

Material ID

4070004ABL R1000

Blue

1,000 ft (305 m)

Reel

700201361

4070004AOR R1000

Orange

1,000 ft (305 m)

Reel

760016519

Category 6, Outdoor
1571 Cable
The SYSTIMAX Category 6, Outdoor 1571 cable consists of
polyethylene, insulated conductors, tightly twisted into four
pairs. The pairs are stranded around a polyolefin fluted center
member, filled with a flooding compound and jacketed with a
black polyethylene jacket. The 1571 cable is fully compliant with
Category 6 requirements of TIA/EIA 568B.2-1 and ISO/IEC 11801.

Physical Specifications:

Weight: 27.3 lbs/1,000 ft (12.38 kg/304.8 m)

Nominal Jacket Thickness: 0.020 in (0.51 mm)
Nominal Outside Diameter: 0.250 in (6.35 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -40F to 140F (-40C to 60C)
Gauge: 23 AWG

Electrical Specifications:

NVP (fastest pair @ 10 MHz): 62%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: Category 6
TIA/EIA 568B.2-1
ISO/IEC 11801

Product Number

Pair Count

Color

Length

Package

Material ID

1571004ABK

Black

1,000 ft (305 m)

Reel

760008888

32

1100GS3 GigaSPEED XL
Modular
Patch Panel
The 1100GS3 Modular Patch Panel is a 19inch rack or wall mountable 8-pin modular
jack panel that accommodates repeated
line moves, additions and rearrangements. Installation is easy using
proven 110 IDC gas tight terminations in the back with easy to read
labeling guides. Designed by SYSTIMAX Labs as part of the fully
tuned and integrated GigaSPEED XL cabling solutions, the 1100GS3
provides an industry standard panel footprint but with many performance and feature extras.
The SYSTIMAX 1100AGS3 panel is angled to allow the cable to flow to each side of the rack. This enables the patch cords to be
routed directly into vertical cable managers. It also allows the labeling scheme and port identification to be visible at all times.

Features and Benefits:

Can support network line speeds in excess of 1 Gbps.
Each panel comes ready to install, including front and
rear labels
Backward compatible with Category 5e, 5 and 3 cords
and cables, however optimal performance is achieved
when used with GigaSPEED GS8E patch cords
Certified component of an integrated GigaSPEED XL
Solution
Qualifies for a 20-Year Extended Product Warranty and
Applications Assurance when included in a certified
SYSTIMAX GigaSPEED channel

Electrical performance guaranteed to meet or exceed

TIA/EIA 568B.2-1 Category 6 and ISO/IEC Category 6/
Class E specifications
Vertical and horizontal cord organizers available to
improve patch cord management
Available in 24- and 48-port configurations featuring
universal A/B labeling
110 connector terminations on rear of panel allow quick
and easy installation of 22 to 24 AWG cable
Attractive black powder covered high-strength steel
panel comes equipped with a removable rear mounted
cable management bar

Physical Specifications:

Height: 24-Ports: 1.74 in (4.38 cm)

48-Ports: 3.50 in (8.83 cm)
Width: 19 in (48.26 cm)
Depth: 1.60 in (4.06 cm)
Plastic Material: High-impact, flame retardant, thermoplastic
Flammability Rating: UL-rated 94 V-0
Operating Temperature: 14F to 140F (-10C to 60C)
Storage Temperature: -40F to 158F (-40C to 70C)
Humidity: 95% (non-condensing)
Contact Material & Plating: Copper alloy, 100 micro-inch (2.54
microns) bright solder over 100 micro-inch (2.54 microns) nickel
underplate. Insulation displacement connectors accept solid or
stranded wire
Nominal Solid Conductor Diameter: 0.016 in to 0.025 in
(0.40 mm to 0.64 mm) (26 to 22 AWG)
Nominal Stranded Conductor Diameter: 0.020 in to 0.025 in
(0.51 mm to 0.64 mm) (24 to 22 AWG)
Insulation Size: 0.030 in to 0.046 in (0.76 mm to 1.17 mm)

Insulation Types: All plastic insulates, including: PVC, irradiated PVC,

Polyethylene, Polypropylene, PTFE, Polyurethane, Nylon, and FEP
Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold
plating over 100 micro-inch (2.54 microns) nickel underplate
Plug Retention Force: 30 lbs (133 N) minimum between modular
plug and jack
Plug Insertion Life: 750 minimum insertions of an 8-position IEC
60603-7 compliant plug
Plug/Jack Contact Force: 100 grams minimum per contact using
FCC approved plug

Electrical Specifications:

Insulation Resistance: 500 megaohms minimum

Current Rating: 1.5 A at 68F (20C)
TIA/EIA Category: 6
Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,
contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to
exposed conductive surface
UL and cUL Listed

Product Number

Wiring

Number of Ports

Material ID

1100GS3-24

Universal A/B

24xRJ45

700173750

1100GS3-48

Universal A/B

48xRJ45

700173768

1100AGS3-24-Angled

Universal A/B

24xRJ45

760026757

1100AGS3-48-Angled

Universal A/B

48xRJ45

760026765

1100 ICON Label Holder Kit

N/A

N/A

760001404

33

GigaSPEED
XL

1100GS3 Multimedia
Distribution
Hardware
1100GS3 Multimedia panel product lines are
made up of basic panel kits, and various
copper and fiber modules with LC, SC, ST
adapters. The 1100GS3 panel kits have two
configurations. The 1U kit supports four modules, and the 2U kit supports eight modules.
There are six adapters in both SC and ST modules, and 12 adapters in the LC module.
This modular approach gives the customer total flexibility in selecting the required fiber adapters. In addition it provides for fiber
and GigaSPEED XL copper solutions, since both fiber and GigaSPEED XL modules can fit into the same panel kit. This feature also
supports existing GigaSPEED XL customers, by giving them the option of a cost effective upgrade from copper to fiber solutions,
by simply replacing the copper modules with the fiber modules in conjunction with the cable changes.

GigaSPEED
XL

The 1100GS3 Multimedia panel kits can be mounted in 19-inch racks for enterprise applications. Panel kits will include cable
retainers and fasteners, labels, mounting screws and installation instructions.

1100GS3 Multimedia Panel

Product Number

Detailed Description

Modules/Ports

Material ID

1100GS3-1U

1100GS3-1U Panel Kit

4 Modules

760001776

1100GS3-2U

1100GS3-2U Panel Kit

8 Modules

760001784

1100GS3 Multimedia Modules

Product Number

Detailed Description

Modules/Ports

Material ID

1100-DM-GS3-RJ45

1100GS3 Copper Module

6 RJ45

700212137

1100-DM-GS3-LS-SC/SC

1100GS3 LazrSPEED SC Module

6 SC

760001792

1100-DM-GS3-LS-ST/ST

1100GS3 LazrSPEED ST Module

6 ST

760001800

1100-DM-GS3-LS-LC/LC

1100GS3 LazrSPEED LC Module

12 LC

760001818

1100-DM-GS3-MM-SC/SC

1100GS3 OptiSPEED SC Module

6 SC

760001826

1100-DM-GS3-MM-ST/ST

1100GS3 OptiSPEED ST Module

6 ST

760001834

1100-DM-GS3-MM-LC/LC

1100GS3 OptiSPEED LC Module

12 LC

760001842

1100-DM-GS3-SM -SC/SC

1100GS3 TeraSPEED SC Module

6 SC

760001859

1100-DM-GS3-SM-ST/ST

1100GS3 TeraSPEED ST Module

6 ST

760001867

1100-DM-GS3-SM-LC/LC

1100GS3 TeraSPEED LC Module

12 LC

760001875

Blank Module

760018069

34

PATCHMAX GS3
GigaSPEED XL
Distribution Hardware
The PATCHMAX GS3 panel system helps unleash the power of
an integrated GigaSPEED XL copper and fiberoptic LazrSPEED/
TeraSPEED/OptiSPEED cabling solution while maintaining all of
the innovative features that have made PATCHMAX unique in the
industry. Its unique modularity and patch cord management system
continue to provide unmatched flexibility to MIS managers with the
ability to mix and match copper and fiber media in the same panel.
The 19-inch rack mountable patch panel is designed to accept 4
or 8 six-port Distribution Modules (DM) which can be rotated forward, allowing front access to the
110 type IDC terminals for easy cable termination. Built-in horizontal patch cord management brackets provide support for patch
cords as well as a holder for the DM modules during installation.
This modular approach gives the customer total flexibility in selecting the required copper and fiber adapters. In addition it
provides for fiber and GigaSPEED XL copper solutions, since both fiber and GigaSPEED XL modules can fit into the same panel kit.
This feature also supports existing GigaSPEED XL customers, by giving them the option of a cost effective upgrade from copper to
fiber solutions, by simply replacing the copper modules with the fiber modules in conjunction with the cable changes.

Physical Specifications:

Height: 4 Module Panel: 3.53 in (8.9 cm)

8 Module Panel: 5.29 in (13.34 cm)
Width: 4 Module Panel: 19 in (48.3 cm)
8 Module Panel: 19 in (48.3 cm)
Depth: 4 Module Panel: 8.13 in (20.5 cm)
8 Module Panel: 8.13 in (20.5 cm)
Plastic Material: High-impact, flame retardant, thermoplastic
Flammability Rating: UL-rated 94 V-0
Operating Temperature: 14F to 140F (-10C to 60C)
Storage Temperature: -40F to 158F (-40C to 70C)
Humidity: 95% (non-condensing)
Contact Material & Plating: Copper alloy, 100 micro-inch (2.54
microns) bright solder over 100 micro-inch (2.54 microns) nickel
under plate. Insulation displacement connectors accept solid or
stranded wire
Nominal Solid Conductor Diameter: 0.016 in to 0.025 in
(0.40 mm to 0.64 mm) (26 to 22 AWG)
Nominal Stranded Conductor Diameter: 0.020 in to 0.025 in
(0.51 mm to 0.64 mm) (24 to 22 AWG)
Insulation Size: 0.030 in to 0.046 in, (0.76 mm to 1.17mm)
Insulation Types: All plastic insulates, including: PVC, irradiated PVC,
Polyethylene, Polypropylene, PTFE, Polyurethane, Nylon and FEP
Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold
plating over 100 micro-inch (2.54 microns) nickel underplate
Plug Retention Force: 30 lbs (133 N) minimum between modular
plug and jack
Plug Insertion Life: 750 minimum insertions of an 8-position IEC
60603-7 compliant plug
Plug/Jack Contact Force: 100 grams minimum per contact using
FCC approved plug

Electrical Specifications:

Insulation Resistance: 500 megaohms minimum

Current Rating: 1.5 A at 68F (20C)
TIA/EIA Category: 6
Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,
contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to
exposed conductive surface
UL and cUL Listed

35

GigaSPEED
XL

PATCHMAX GS3 Panels

Product Number

Detailed Description

Modules/Ports

Material ID

PM-GS3-24

PATCHMAX GS3 Copper Patch Panel - 24-Port

4 Modules

700173735

PM-GS3-48

PATCHMAX GS3 Copper Patch Panel - 48-Port

8 Modules

700173743

PM-GS3-2U

PATCHMAX GS3-2U Panel Kit (Modules not Included)

4 Modules

760001669

PM-GS3-3U

PATCHMAX GS3-3U Panel Kit (Modules not Included)

8 Modules

760001677

PATCHMAX GS3 Modules

GigaSPEED
XL

Product Number

Detailed Description

Modules/Ports

Material ID

PM-DM-GS3-RJ45

PATCHMAX GS3 Copper Module

6 RJ45

700173776

PM-DM-GS3-LS-SC/SC

PATCHMAX GS3 LazrSPEED SC Module

6 SC

760001685

PM-DM-GS3-LS-ST/ST

PATCHMAX GS3 LazrSPEED ST Module

6 ST

760001693

PM-DM-GS3-LS-LC/LC

PATCHMAX GS3 LazrSPEED LC Module

12 LC

760001701

PM-DM-GS3-MM-SC/SC

PATCHMAX GS3 OptiSPEED SC Module

6 SC

760001719

PM-DM-GS3-MM-ST/ST

PATCHMAX GS3 OptiSPEED ST Module

6 ST

760001727

PM-DM-GS3-MM-LC/LC

PATCHMAX GS3 OptiSPEED LC Module

12 LC

760001735

PM-DM-GS3-SM-SC/SC

PATCHMAX GS3 TeraSPEED SC Module

6 SC

760001743

PM-DM-GS3-SM-ST/ST

PATCHMAX GS3 TeraSPEED ST Module

6 ST

760001750

PM-DM-GS3-SM-LC/LC

PATCHMAX GS3 TeraSPEED LC Module

12 LC

760001768

36

MGS400 Series
GigaSPEED XL
Information Outlet
The MGS400 Information Outlet features proprietary crosstalk
cancellation techniques for superior Near End Crosstalk (NEXT
& PSNEXT) performance that provides unmatched throughput
performance when installed as part of a complete GigaSPEED XL
channel. The solution is guaranteed to exceed the
Category 6/Class E channel specifications for ISO/IEC and TIA,
even under the worst case channel configuration.

Features and Benefits:

Snaps into any M-Series modular faceplate, frame, or surface-mount box
Can be mounted either at 90 degrees (straight) or 45 degrees (angled)
Angled feature eliminates the need for special faceplates
Multicolored identification labels assure fast, accurate installation
Low-profile wire cap protects against contamination and secures connections
The MGS400 outlet uses either the TIA/EIA T568A or TIA/EIA T568B wiring

Physical Specifications:

Dimensions: HxWxD: 0.8 in x 0.8 in x 1.2 in (2.0 cm x 2.0 cm x 3.1 cm)

Universal A/B labeling
Plastic Material: High-impact, flame retardant, thermoplastic
Flammability Rating: UL-rated 94 V-0
Operating Temperature: 14F to 140F (-10C to 60C)
Storage Temperature: -40F to 158F (-40C to 70C)
Humidity: 95% (non-condensing)
Contact Material & Plating: Copper alloy, 100 micro-inch (2.54
microns) bright solder over 100 micro-inch (2.54 microns) nickel
underplate. Insulation displacement connectors accept solid or
stranded wire
Nominal Solid Conductor Diameter: 0.016 in to 0.025 in
(0.40 mm to 0.64 mm) (26 to 22 AWG)
Nominal Stranded Conductor Diameter: 0.020 in to 0.025 in
(0.51 mm to 0.64 mm) (24 to 22 AWG)
Insulation Size: 0.030 in to 0.046 in (0.76 mm to 1.17 mm)
Insulation Type: All plastic insulates, including: Polyethylene,
Polypropylene, PTFE, Polyurethane, Nylon and FEP

Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold

plating over 100 micro-inch (2.54 microns) nickel underplate
Plug Retention Force: 30 lbs (133 N) minimum between between
modular plug and jack
Plug Insertion Life: 750 minimum insertions of an 8-position IEC
60603-7 compliant plug
Plug/Jack Contact Force: 100 grams minimum per contact using FCC
approved plug

Electrical Specifications:

Insulation Resistance: 500 megaohms minimum

Current Rating: 1.5 A at 68F (20C)
TIA/EIA Category: 6
Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,
contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to
exposed conductive surface
UL and cUL Listed

Product Number

Color

Qty/Pkg

Material ID

MGS400-003

Black

700206667

MGS400-112

Orange

700206683

MGS400-123

Yellow

700206691

MGS400-226

Green

700206709

MGS400-246

Ivory

700206717

MGS400-262

White

700206725

MGS400-270

Gray

700206733

MGS400-317

Red

700206741

MGS400-318

Blue

700206758

MGS400-361

Violet

700206675

MGS400-003

Black

100

760041962

MGS400-246

Ivory

100

760041970

MGS400-262

White

100

760041988

MGS400-318

Blue

100

760041996

Handheld Termination Tool

760034215

37

GigaSPEED
XL

GS8E GigaSPEED XL
Modular Patch Cord
The GS8E Modular Patch Cord
ord family of high bandwidth cords
form parts of the GigaSPEED XL cabling solution. Electrical
performance exceeds TIA/EIA and ISO/IEC Category 6/Class E
specifications and is fully backward compatible with
Category 5e, and 5 connectors.
The GS8H Low Smoke Zero Halogen (LSZH) is a stranded
GigaSPEED XL Solution cord.
The GS8L is a 3071 Low Smoke Zero Halogen solid conductor
cable which is terminated with the new GS 8-pin connectorized plugs.
The GS3 solid conductor cords consist of solid conductor cable, factory terminated with an GS8E plug(s).
GigaSPEED
XL

Patented plug design, improved 24 gauge cordage and a unique manufacturing process assures excellent electrical performance
and low variability. Improved anti-snag feature provides maximum protection from snagging during moves and rearrangements.
Patch cords are orderable using a 14-character feature configuration coding scheme which replaces the familiar 9-character
Material ID. This allows maximum flexibility for ordering many different combinations of plug ends, cordage types, colors and
lengths. Please use SYSTIMAX Copper Patch Cord Product Identifier (in Copper Reference Section) for ordering information or
contact your SYSTIMAX BusinessPartner.

Physical Specifications:

Electrical Specifications:

Contact Material: Phosphor Bronze

Contact Plating: Gold 50 micro-inch (1.27 microns)
Nickel 100 micro-inch (2.54 microns)
Insertion Life: 750 minimum
Plug Material: Polycarbonate UL-rated 94 V-O
Operating Temperature: 14F to 140F (-10C to 60C)

TIA/EIA: Category 6
UL and cUL: CM (cordage)

Product Number

Detailed Description

CPC Code

GS8E

GS3 Stranded Double Ended Cord

CPC3312

GS8MGS-81B

GS3 RJ45 to MGS Outlet with 81 Series Cable

CPC32A2

GS88

Solid Conductor Cord with 81 Series Cables

CPC33A2

G8C1-SE

Single Ended Cord with 81 Series Cable

CPC34A2

Keyed GS8E

Modular Cord

CPC9912

GS8H

LSZH Stranded Cord Double Ended

CPC3392

GS8L-DE

GS8E Double Ended with Solid Conductor LSZH Cordage

CPC3322

GS8E-SPD

GS3 Solid Plenum Double Ended

CPC3372

GS8E-SND

GS3 Solid Non Plenum Double Ended

CPC3382

GS8E-SP

GS3 Solid Plenum Single Ended

CPC3472

GS8E-SN

GS3 Solid Non Plenum Single Ended

CPC3482

38

VisiPatch System
The VisiPatch System uses state-of-the-art IDC technology for optimum patch
cord organization and management. The system provides superior GigaSPEED
XL performance which is a clear advantage in data center applications. The
unique reverse direction design provides a neat, cordless appearance that
dramatically improves patch cord management and avoids the clutter that is
inherent with other patch cord systems. The modular approach in the design
maximizes the overall flexibility of the system. The system is lightweight,
stackable and the components snap together for ease of installation.

Features and Benefits:

Proven SYSTIMAX SCS performance

Supports GigaSPEED XL channels
4-pair Patch Cord certified GigaSPEED XL component
Fast, easy installation with low operating costs
Innovative reverse patch cord design
Neat, cordless appearance
- Seven 4-pair cables per row
- Up to 252 4-pair cables per vertical
Unique plastic construction
Snap-together components
28-port (112-pair) and 84-port (336-pair) stackable field terminated kits
Superior patch cord routing and management
Higher useable density

Back Panel

The back panel is the backbone of the VisiPatch System. Using space-age
plastic structural foam technology, this patented wall mounting hardware consists of
two identical L-shaped halves that snap together to form a strong U-shaped panel.
The lightweight panel can be easily mounted to support multiple mounting options.
The back panel holds 4 or 12 wiring blocks to conform to any size installation.

Wiring Block The wiring block snaps into the back panel and accepts up to seven
4-pair cables (28 conductor pairs). It also accepts 25-pair count cables using 5-pair connecting blocks (25 conductor pairs). The wiring block entrance slot and grooves provide
versatile cable management. This support feed system allows up to seven 4-pair cables
for each wiring block.
Designation Strip/Cover Plate The cover plate snaps directly on to the
wiring block and provides protection for the terminated cables. The two piece, clear
plastic design provides easy access to the cables and enables visual verification of cable
termination quality without moving any components. The pivoted plastic label holder
also serves as a designation strip for circuit identification, and facilitates the latching of
the patch cord.
Physical Specifications:

Height: 110UB1-112FT: 7.2 in (18.29 cm)

110UB1-336FT: 21.6 in (54.86 cm)
Width: 8.5 in (21.59 cm)
Depth: 7.5 in (19.05 cm)
Pairs per row: 28
Pairs per back panel: 110UB1-112FT: 112
110UB1-336FT: 336
Patch cords per row: 7 (4-pair cords)

39

VisiPatch

Product Number

Detailed Description

110UB1-112FT

VisiPatch System, 112-pair

110UB1-336FT

Contents

Qty

Material ID
108836792

100PR Base, Back Panel Half

110UW-28, Wiring Block

110UC-28, Designation Covers

110C4W, Connecting Block

30

110UPHLDR, Label Holder

110WG3-2688L, White Label

12

Instruction Sheet

300PR Base, Back Panel Half

110UW-28, Wiring Block

12

110UC-28, Designation Covers

12

110C4W, Connecting Block

84

110UPHLDR, Label Holder

12

VisiPatch System, 336-pair

108561143

VisiPatch

110WG3-2688L, White Label

12

Instruction Sheet

110U2R

Distribution Ring

108523937

110UTC

Trough Cover

108593203

110U19M

Bracket

108634429

110UHD-S8

Horizontal Duct

108637737

110UP-WB

Wall Mount Bracket

108688946

110UHS20

Installation Spacer

108637612

110UHPT-Uni. Horz. Trough

Universal Horizontal Trough

108836834

110UPT-Kit-Trough

Trough, U Channel to mount below VisiPatch components on wall

700012990

110UGND

Ground Bar

108561135

110UHWSD

Spacer Duct

700032766

110YG3-2688L

Yellow Label

108528407

110WG3-2688L

White Label

108528415

110SG3-2688L

Slate Label

108528423

110RG3-2688L

Red Label

108528431

110PG3-2688L

Purple Label

108528449

110GG3-2688L

Green Label

108528456

110CG3-2688L

Orange Label

108528597

110BG3-2688L

Blue Label

108528464

110KG3-2688L

Brown Label

108528472

HLDR-110FDLH

Label Holder, Clear Plastic Cover

108738113

110C4W

Connecting Block

108538612

40

VisiPatch
Patch Cords
The VisiPatch Patch Cords utilize a patented connector
design that allows the cordage to be neatly routed
back toward the VisiPatch panel rather than to project
forward. The connector snaps on with an audible click
and features an anti-snag device, which allows the cord
to be easily removed from the panel. The 1-, 2-, and 4-pair patch cords provide
complete flexibility for all circuit types to accommodate IP, ISDN, digital voice, analog/voice/fax/modem applications.
The 2- and 4-pair cords support GigaSPEED XL performance for higher bandwidth data applications. The 1-pair cord supports
voice, fax and modem applications. The 119 cords use the VisiPatch connector design terminated to a GigaSPEED RJ45 connector.
Patch cords are orderable using a 14-character feature configuration coding scheme which replaces the familiar 9-character
Material ID. This allows maximum flexibility for ordering many different combinations of plug ends, cordage types, colors and
lengths. Please use SYSTIMAX Copper Patch Cord Product Identifier (in Copper Reference Section) for ordering information or contact your SYSTIMAX BusinessPartner.

Physical Specifications:

Electrical Specifications:

Contact Material: Phosphor Bronze

Contact Plating: Gold 2 to 5 micro-inch (0.051 to 0.128 microns)
Nickel 75 micro-inch (1.91 microns)
Insertion Life: 200 minimum
Plug Material: Polycarbonate Blend UL-rated 94 V-O
Operating Temperature: 14F to 140F (-10C to 60C)

TIA/EIA: Category 6
UL and cUL: CM (cordage)

VisiPatch

Product Number

Detailed Description

CPC Code

110VP2

VisiPatch to VisiPatch 1-Pair Cord

CPC5562

110VP4

VisiPatch to VisiPatch 2-Pair Cord

CPC5552

110VP8-GS3-B

VisiPatch to VisiPatch 4-Pair B Wired Cord

CPC5512

119VP8-GS3-B

VisiPatch to RJ45 4-Pair B Wired Cord

CPC5312

41

VisiPatch

42

PowerSUM Solution
Exceeding Category 5/5e
1 Racks and cabinets
4

2 110 system
3 1100PS PATCHMAX PS modular
patch panels

4 Optional zone box

with MPS100E
5 MPS100E outlet and faceplate
1061/2061/3061/4061 UTP cable
1

117PS equipment cord

D8PS patch cord

PowerSUM Solution

Features and Benefits:

Performance Extended to 155.5 MHz for Channels
Performance certified to exceed the Category 5e specifications for enhanced channels
Supports IEEE 802.3 1000BASE-T plus other legacy LANs and applications
PowerSUM channel performance specifications exceed not only the TIA 568B.2 and ISO 11801 Edition 2 for Category 5e/Class D
cabling systems but are also capable of providing stable and continual performance up to and beyond 100 MHz.
SYSTIMAX SCS channels that are comprised exclusively of PowerSUM passive products end-to-end are capable of delivering
1.0 Gbps to the workstation in accordance with application standards and are eligible for the SYSTIMAX SCS 20-Year Extended
Product Warranty and Applications Assurance.

PowerSUM products include:

4-pair 1061, 2061, 3061 UTP Cables

110 VisiPatch System and 110 Connector System
PATCHMAX and 1100 PS CAT5E Modular Patch Panels
MPS100E Information Outlets
D8PS Patch and Workstation Cords
110, 117, 119 Patch Cords

43

PowerSUM

PowerSUM Specifications
SYSTIMAX PowerSUM Category 5e Guaranteed Channel Performance
Guaranteed Performance Specifications for PowerSUM Solution
Electrical Parameter
(1 155.5 MHz)

Guaranteed Channel Margins to Category 5E/Class D

TIA 568B.2 and ISO 11801 Edition 2.0

Insertion Loss

5.0 %

NEXT

3.0 dB

PSNEXT

5.5 dB

ELFEXT

4.5 dB

PSELFEXT

5.5 dB

Return Loss

1.0 dB

Insertion
Frequency Loss
NEXT
(MHz)
(dB)
(dB)

PowerSUM

ACR
(dB)

PSNEXT
(dB)

PSACR
(dB)

ELFEXT
(dB)

Return
PSELFEXT Loss
(dB)
(dB)

Phase
Delay
(ns)

Delay
Skew
(ns)

1.0

2.1

63.0

60.9

62.5

60.4

61.8

59.8

18.0

580

30

4.0

4.2

56.6

52.4

56.2

52.0

49.8

47.8

18.0

562

30

8.0

6.0

51.6

45.6

51.2

45.2

43.8

41.8

18.0

557

30

10.0

6.7

50.0

43.3

49.6

42.9

41.8

39.8

18.0

555

30

16.0

8.6

46.6

38.0

46.2

37.6

37.8

35.7

18.0

553

30

20.0

9.7

45.0

35.4

44.6

34.9

35.8

33.8

18.0

552

30

25.0

10.9

43.4

32.5

42.9

32.1

33.9

31.9

17.0

551

30

31.3

12.2

41.8

29.5

41.3

29.1

31.9

29.9

16.0

550

30

62.5

17.7

36.6

19.0

36.1

18.4

25.9

23.9

13.1

549

30

100.0

22.8

33.1

10.3

32.6

9.8

21.8

19.8

11.0

548

30

125.0

25.8

31.5

5.7

30.9

5.1

19.9

17.9

10.1

547

30

155.5

29.1

29.8

0.7

29.2

0.1

18.0

16.0

9.1

547

30

44

Category 5e,
PowerSUM Cable
Non Plenum 1061

The 1061 4-pair cable meets or exceeds Category 5e/Class D attenuation

and NEXT requirements in ISO/IEC 11801, CENELEC EN50173, and TIA/
EIA 568B.1. Further, these cables are UL verified as Category 5e.
The 4-pair 1061C cable is composed of 24 AWG solid copper conductors, insulated with high-density polyolefin. The insulated conductors
are twisted into pairs and jacketed with our specially formulated material. 1061C is rated CM.
The 4-pair 1061B cable is CMR rated and also UL approved. The 4-pair 1061B
cable is composed of 24 AWG solid copper conductors with high-density polyolefin insulation and jacketed with
low-smoke polyvinyl chloride (PVC).

Physical Specifications:

Weight: 20.8 lbs/1,000 ft (9.43 kg/304.8 m)

Nominal Jacket Thickness: 0.021 in (0.53 mm)
Nominal Outside Diameter: 0.21 in (5.33 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 24 AWG

Electrical Specifications:

NVP (fastest pair @10 MHz): 70%

Maximum DC Resistance: 9.38 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Maximum Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.1 and ANSI/TIA/EIA 568B.2 Category 5e
ISO/IEC 11801: 2002 (Edition 2) Class D
CENELEC EN50173: 2002 (Edition 2) Category 5e
UL and cUL: CMR (for 1061B)
CM (for 1061C)

UL CMR Rated

PowerSUM

Product Number

Pair Count

Color

Length

Package

Material ID

1061004BBL W1000

Blue

1,000 ft (305 m)

We Tote

107251696

1061004BBL R1000

Blue

1,000 ft (305 m)

Reel

107323636

1061004BSL W1000

Slate

1,000 ft (305 m)

We Tote

107091936

1061004BWH W1000

White

1,000 ft (305 m)

We Tote

107819575

1061004BOR W1000

Orange

1,000 ft (305 m)

We Tote

108173840

1061004BRD W1000

Red

1,000 ft (305 m)

We Tote

700022643

Product Number

Pair Count

Color

Length

Package

Material ID

1061004CSL R1000

Slate

1,000 ft (305 m)

Reel

106836943

1061004CSL W1000

Slate

1,000 ft (305 m)

We Tote

106836950

1061004CWH R1000

White

1,000 ft (305 m)

Reel

107849283

1061004CWH W1000

White

1,000 ft (305 m)

We Tote

107147787

1061004CIV W1000

Ivory

1,000 ft (305 m)

We Tote

106871817

1061004CIV R1000

Ivory

1,000 ft (305 m)

Reel

107076192

1061004CYL W1000

Yellow

1,000 ft (305 m)

We Tote

107001687

1061004CYL R1000

Yellow

1,000 ft (305 m)

Reel

106999071

UL CM Rated

1061004CLB W1000

Light Blue

1,000 ft (305 m)

We Tote

106871809

1061004CLB R1000

Light Blue

1,000 ft (305 m)

Reel

107057853

1061004CBL R1000

Blue

1,000 ft (305 m)

Reel

760004705

1061004CBL W1000

Blue

1,000 ft (305 m)

We Tote

760004671

1061004COR R1000

Orange

1,000 ft (305 m)

Reel

107193435

1061004COR W1000

Orange

1,000 ft (305 m)

We Tote

700156177

45

Product Number

Pair Count

Color

Length

Package

Material ID

1061004CRD W1000

Red

1,000 ft (305 m)

We Tote

106926363

1061004CRD R1000

Red

1,000 ft (305 m)

Reel

107244055

1061004CGN W1000

Spring Green

1,000 ft (305 m)

We Tote

107244030

1061004CGN R1000

Spring Green

1,000 ft (305 m)

Reel

107244048

1061004CLL W1000

Lilac

1,000 ft (305 m)

We Tote

107244022

1061004CBK W1000

Black

1,000 ft (305 m)

We Tote

107509051

1061004C1SL R1000*

Slate

1,000 ft (305 m)

Reel

700207897

1061004C1SL W1000*

Slate

1,000 ft (305 m)

We Tote

700207871

1061004C1LB W1000*

Light Blue

1,000 ft (305 m)

We Tote

700207889

*Austel

Plenum 2061

The 2061B Plenum 4-pair cable meets or exceeds Category 5e/Class D attenuation and NEXT requirements in ISO/IEC 11801,
CENELEC EN50173 and TIA/EIA 568B. Further, these cables are UL verified as Category 5e. The 2061B cable is composed of 24 AWG
(0.5 mm) bare solid copper conductors insulated with Fluorinated-Ethylene-Propylene (FEP). The core of twisted pairs is jacketed
with a low smoke PVC. It conforms to the low flame, low smoke requirements of the NEC.

Physical Specifications:
PowerSUM

Weight: 21.9 lbs/1,000 ft (9.93 kg/304.8 m)

Nominal Jacket Thickness: 0.016 in (0.406 mm)
Nominal Outside Diameter: 0.192 in (4.877 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 24 AWG

Electrical Specifications:

NVP (fastest pair @ 10 MHz): 73%

Maximum DC Resistance: 9.38 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Maximum Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.1 and ANSI/TIA/EIA 568B.2 Category 5e
ISO/IEC 11801: 2002 (Edition 2) Class D
CENELEC EN 50173: 2002 (Edition 2) Category 5e
UL and cUL: CMP

Product Number

Pair Count

Color

Length

Package

Material ID

2061004BSL W1000

Slate

1,000 ft (305 m)

We Tote

108606815

2061004BSL R1000

Slate

1,000 ft (305 m)

Reel

107193468

2061004BWH R1000

White

1,000 ft (305 m)

Reel

106939317

2061004BWH W1000

White

1,000 ft (305 m)

We Tote

106939325

2061004BWH W1000

White

1,000 ft (305 m)

We Tote

760003236

2061004BYL R1000

Yellow

1,000 ft (305 m)

Reel

106965387

2061004BYL W1000

Yellow

1,000 ft (305 m)

We Tote

106965379

2061004BBL R1000

Blue

1,000 ft (305 m)

Reel

106946809

2061004BBL W1000

Blue

1,000 ft (305 m)

We Tote

106946825

2061004BOR R1000

Orange

1,000 ft (305 m)

Reel

106974348

2061004BOR W1000

Orange

1,000 ft (305 m)

We Tote

108052879

2061004BGN R1000

Spring Green

1,000 ft (305 m)

Reel

107272841

2061004BGN W1000

Spring Green

1,000 ft (305 m)

We Tote

107272809

2061004BLL R1000

Lilac

1,000 ft (305 m)

Reel

107273286

2061004BLL W1000

Lilac

1,000 ft (305 m)

We Tote

107273278

2061004BBK R1000

Black

1,000 ft (305 m)

Reel

107383705

2061004BBK W1000

Black

1,000 ft (305 m)

We Tote

107509036

2061004BRD R1000

Red

1,000 ft (305 m)

Reel

108924838

2061004BRD W1000

Red

1,000 ft (305 m)

We Tote

700013667

2061004BBR R1000

Brown

1,000 ft (305 m)

Reel

760027326

2061004BPK W1000

Pink

1,000 ft (305 m)

We Tote

760006593

46

Low Smoke Zero Halogen (LSZH) 3061

The 3061A LSZH 4-pair cable meets or exceeds Category 5e/Class D attenuation and NEXT requirements in ISO/IEC 11801,
CENELEC EN50173 and TIA/EIA 568B. Further, these cables are UL verified as Category 5e. The 3061A LSZH cable is composed of
0.511 mm (24 AWG) bare solid copper conductors insulated with high density polyolefin. The insulated conductors are tightly
twisted into pairs and jacketed with the low smoke non-halogen compound.

Physical Specifications:

Weight: 22 lbs/1,000 ft (9.98 kg/304.8 m)

Nominal Jacket Thickness: 0.021 in (0.533 mm)
Nominal Outside Diameter: 0.205 in (5.207 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 24 AWG

Electrical Specifications:

NVP (fastest pair @ 10 MHz): 70%

Maximum DC Resistance: 9.38 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Maximum Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.1 and ANSI/TIA/EIA 568B.2 Category 5e
ISO/IEC 11801: 2002 (Edition 2) Class D
CENELEC EN50173: 2002 (Edition 2) Category 5e
IEC 754 part 2, Non-halogen based on pH and conductivity
measurements
IEC 1034 part 2, Smoke emission
IEC 332 part 3, Flammability and flame retardant
NES 713: Toxicity index

Product Number

Pair Count

Color

Length

Package

Material ID

3061004AWH W1000

White

1,000 ft (305 m)

We Tote

107573545

3061004AWH R1000

White

1,000 ft (305 m)

Reel

107573537

3061004AWH R4400

White

4,400 ft (1,341 m)

Reel

107860538

3061004AWH CUSTL

White

Custom Length

Reel

107573560

Limited Combustible 4061

The 4061 cable is UL verified Category 5e and UL listed type CMP 50 for use in air return handling spaces and compliant with the
UL limited combustible requirement. The cable is made with an all FEP construction which is not subject to performance changes
due to environmental conditions.

Physical Specifications:

Weight: 25.3 lbs/1,000 ft (11.48 kg/304.8 m)

Insulation Thickness: 0.0065 in (0.17 mm)
Nominal Jacket Thickness: 0.010 in (0.25 mm)
Nominal Outside Diameter: 0.18 in (4.58 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 23 AWG

Product Number

Pair Count

Color

4061004ABL R1000

4061004AWH R1000

Electrical Specifications:

NVP (fastest pair @ 10 MHz): 71%

Maximum DC Resistance: 7.61 Ohms/100 m
Maximum DC Resistance Unbalance: 3%
Mutual Capacitance at 1 kHz: 5.6 nF/100 m
Standards: ANSI/TIA/EIA 568B.1 and ANSI/TIA/EIA 568B.2 Category 5e
ISO/IEC 11801: 2002 (Edition 2) Class D
CENELEC EN50173: 2002 (Edition 2) Category 5e
UL and cUL: CMP-50

Length

Package

Material ID

Blue

1,000 ft (305 m)

Reel

108671272

White

1,000 ft (305 m)

Reel

108671280

47

PowerSUM

1100 Category 5E
PowerSUM Modular
Patch Panel
The 1100 PowerSUM Modular Panel is a member of
the PowerSUM Solution. It exceeds the Category 5 and
Category 5e requirements in ISO/IEC 11801 CENELEC
EN50173 and TIA/EIA 568B. The 1100PSE Category 5e
Modular Patch Panel is a 19 in (48.3 cm) wide modular
patch panel and is available with 24 or 48 jacks, and is
capable of handling either T568A or T568B wiring.
The minimum insertion life is 750 cycles, which allows for hundreds of moves and additions.
Label strips for both the front and back of the panel allow for easy identification of circuits.

Physical Specifications:

PowerSUM

Height: 24-Port: 1.75 in (4.38 cm)

48-Port: 3.50 in (8.83 cm)
Width: 19.0 in (48.3 cm)
Depth: 1.60 in (4.96 cm)
Wire Termination Type:
Insulation displacement (ID), gas tight
Wire Size:
Conductor Type: Solid or stranded (7 strands)
Size: 26/24/22 AWG (0.40/0.51/0.64 mm)
Insulation Type: All plastic insulates, including: PVC, irradiated PVC,
Nylon, Polyethylene, Polypropylene, PTFE, Polyurethane, Teflon
Mechanical Data:
Plug Insertion Life: 750 minimum
Wire Insertion Force: 24 AWG=13-28 lbs (58-125 N)
Wire Retention: 24 AWGtypical pull out force
X-axis=10.6 lbs (47.3 N)
Y-axis=10.6 lbs (47.3 N)
Z-axis=2.4 lbs (10.7 N)
Environmental Conditions:
Temperature Range:
Storage: -40F to 158F (-40C to 70C)
Operational: 14F to 140F (-10C to 60C)
Relative Humidity: (operational) maximum, non-condensing 93%
Materials:
Plastic Components: Polycarbonate, self-extinguishing
Flammability Rating: UL-rated 94 V-O
Oxygen Index: 28.5% minimum
Contact Material: Phosphor Bronze

Electrical Specifications:

Insulation Resistance: 500 megaohms minimum

Current Rating: 1.5 A at 68F (20C)
TIA/EIA Category: 5e
Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,
contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to
exposed conductive surface
UL and cUL Listed

Product Number

Wiring

Number of Ports

Material ID

1100PSCAT5E-24

T568A, T568B

24

108208919

1100PSCAT5E-48

T568A, T568B

48

108208935

1100PS ICON Label - White

760001412

1100PS ICON Label - Blue

760001420

48

PATCHMAX PowerSUM
Distribution
Hardware
PATCHMAX Distribution Hardware is a copper and fiber modular
connecting hardware system. PATCHMAX components can
be purchased individually or as a complete kit. It is designed
to be mounted on EIA 310 Standard 19 inch (48.3 cm) rack/
frame or 1100C type wall mount brackets.
The Category 5e copper kit PM2150 PowerSUM includes a
24-(48) port panel, 4 (8) DM21xx modules, a cable fastener
kit, 1 (2) front retainers, 5 (10) rear retainers, 16 white/blue
labels, straps, tape and installation instructions for the 24- and 48- port kits, respectively.
The P2040 and P2080 are individual, empty panels that hold 4 and 8 snap-in distribution modules, respectively. The P2040 or
P2080 panels allow fiber and copper to be terminated in the same panel. A slack storage tray in the rear of the module maintains
the correct buffered fiber bend radius.

Physical Specifications:

Height: 24-Port: 3.53 in (8.9 cm)

48-Port: 7.06 in (17.8 cm)
Width: 24-Port: 19 in (48.3 cm)
48-Port: 19 in (48.3 cm)
Depth: 24-Port: 8.13 in (20.5 cm)
48-Port: 8.13 in (20.5 cm)
Plastic Material: High-impact, flame retardant, thermoplastic
Flammability Rating: UL-rated 94 V-0
Operating Temperature: 14F to 140F (-10C to 60C)
Storage Temperature: -40F to 158F (-40C to 70C)
Humidity: 95% (non-condensing)
Contact Material & Plating: Copper alloy, 100 micro-inch (2.54
microns) bright solder over 100 micro-inch (2.54 microns) nickel
underplate. Insulation displacement connectors accept solid or
stranded wire
Nominal Solid Conductor Diameter: 0.016 in to 0.025 in
(0.40 mm to 0.64 mm) (26 to 22 AWG)
Nominal Stranded Conductor Diameter: 0.020 in to 0.025 in
(0.51 mm to 0.64 mm) (24 to 22 AWG)
Insulation Size: 0.030 in to 0.046 in (0.76 mm to 1.17 mm)
Insulation Types: All plastic insulates, including: PVC, irradiated PVC,
Polyethylene, Polypropylene, PTFE, Polyurethane, Nylon, and FEP
Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold
plating over 100 micro-inch (2.54 microns) nickel underplate
Plug Retention Force: 30 lbs (133 N) minimum between modular
plug and jack
Plug Insertion Life: 750 minimum insertions of an 8-position IEC
60603-7 compliant plug
Plug/Jack Contact Force: 100 grams minimum per contact using
FCC approved plug

Electrical Specifications:

Insulation Resistance: 500 megaohms minimum

Current Rating: 1.5 A at 68F (20C)
TIA/EIA Category: 5e
Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,
contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to
exposed conductive surface.
UL and cUL Listed
PowerSUM

49

PATCHMAX PowerSUM Panels

Product Number

Detailed Description

Material ID

PM2150PSE-24

PowerSUM Patch Panel, 24-Port

108320029

PM2150PSE-48

PowerSUM Patch Panel, 48-Port

108320045

P2040

Panel for 4 Distribution Modules

107428591

P2080

Panel for 8 Distribution Modules

107428609

PATCHMAX PowerSUM Modules

PowerSUM

Product Number

Detailed Description

Material ID

DM2150PSE

PowerSUM Distribution Module, 6-Port

108320011

DM2302 SC/SC

OptiSPEED Multimode SC Module, 6 Connection

108116484

DM2302 SC/ST

OptiSPEED Multimode SC Front Module, 6 Connection

108116500

DM2302 ST/ST

OptiSPEED Multimode ST Module, 6 Connection

108116526

DM2302 ST/SC

OptiSPEED Multimode ST Front Module, 6 Connection

108116542

DM2302 LC/LC

OptiSPEED Multimode LC Module, 12 Connection

108267634

DM2303 SC/SC

TeraSPEED Singlemode SC Module, 6 Connection

108116492
108116518

DM2303 SC/ST

TeraSPEED Singlemode SC Front Module, 6 Connection

DM2303 ST/ST

TeraSPEED Singlemode ST Module, 6 Connection

108116534

DM2303 ST/SC

TeraSPEED Singlemode ST Front Module, 6 Connection

108116559

DM2303 LC/LC

TeraSPEED Singlemode LC Module, 12 Connection

108267642

DM2304 LC/LC

LazrSPEED Multimode LC Module, 12 Connection

108662131

PATCHMAX PowerSUM Accessories

Product Number

Detailed Description

Material ID

L2300-BL

Icons (4 strips, 6 icons per strip), blue

107536773

L2300-YL

Icons (4 strips, 6 icons per strip), yellow

107536799

L2300-RD

Icons (4 strips, 6 icons per strip), red

107536815

L2300-PL

Icons (4 strips, 6 icons per strip), purple

107536849

R2100

Front Cord Retainer (Kit of 5)

108036690

R2200

Rear Cable Retainer

107638934

R2300

Velcro Fastener Kit

107670952

BP2100

Blank Plate

108028457

50

MPS100E Modular
PowerSUM Information
Outlets
The MPS100E Modular Information Outlets are 8-position/8-conductor highdensity modular information jacks designed for high speed networking
applications using data transmission rates.

Features and Benefits:

Snaps into any M-Series modular faceplate, frame, or surface-mount box
Can be mounted either at 90 degrees (straight) or 45 degrees (angled)
Angled feature eliminates the need for special faceplates
Multicolored identification labels assure fast, accurate installation
Low-profile wire cap protects against contamination and secures connections
Pair splitters and wider channel for enhanced conductor placement and termination
The MPS100E outlet uses either the TIA/EIA T568A or TIA/EIA T568B wiring
The MPS100E outlet is Category 5e compliant

Physical Specifications:

Dimensions: HxWxD: 0.8 in x 0.8 in x 1.2 in (2.0 cm x 2.0 cm x 3.1 cm)

Universal A/B labeling
Plastic Material: High-impact, flame retardant, thermoplastic
Flammability Rating: UL-rated 94 V-0
Operating Temperature: 14F to 140F (-10C to 60C)
Storage Temperature: -40F to 158F (-40C to 70C)
Humidity: 95% (non-condensing)
Contact Material & Plating: Copper alloy, 100 micro-inch (2.54
microns) bright solder over 100 micro-inch (2.54 microns) nickel
underplate. Insulation displacement connectors accept solid or
stranded wire
Nominal Solid Conductor Diameter: 0.016 in to 0.025 in
(0.40 mm to 0.64 mm) (26 to 22 AWG)
Nominal Stranded Conductor Diameter: 0.020 in to 0.025 in
(0.51 mm to 0.64 mm) (24 to 22 AWG)
Insulation Size: 0.030 in to 0.046 in (0.76 mm to 1.17 mm)
Insulation Type: All plastics insulates, including:
Polyethylene, Polypropylene, PTFE, Polyurethane, Nylon and FEP
Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold
plating over 100 micro-inch (2.54 microns) nickel underplate
Plug Retention Force: 30 lbs (133 N) minimum between modular
plug and jack
Plug Insertion Life: 750 minimum insertions of an 8-position IEC
60603-7 compliant plug
Plug/Jack Contact Force: 100 grams minimum per contact using
FCC approved plug

Electrical Specifications:

Insulation Resistance: 500 megaohms minimum

Current Rating: 1.5 A at 68F (20C)
TIA/EIA Category: 5e
Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,
contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to
exposed conductive surface
UL and cUL Listed
PowerSUM

Product Number

Wiring

Color

Qty/Pkg

Material ID

MPS100E-003

T568A, T568B

Black

108232695
108232703

MPS100E-112

T568A, T568B

Orange

MPS100E-123

T568A, T568B

Yellow

108232711

MPS100E-226

T568A, T568B

Green

108232729

MPS100E-246

T568A, T568B

Electrical Ivory

108232737

MPS100E-262

T568A, T568B

Electrical White

108232745

MPS100E-270

T568A, T568B

Electrical Gray

108232752

MPS100E-317

T568A, T568B

Red

108232760

MPS100E-318

T568A, T568B

Blue

108232778

MPS100E-361

T568A, T568B

Violet

108337726

51

D8PS PowerSUM
Modular Patch
Cord
The D8PS Modular Patch Cord meets or exceeds
Attenuation and NEXT Category 5 and
Category 5e specifications for patch cords as
specified in ISO/IEC 11801, CENELEC EN50173
and TIA/EIA 568B. Available in a variety of colors and lengths, the
D8PS cords are ideal for high activity environments that require reliable data transmission.
Patch cords are orderable using a 14-character feature configuration coding scheme which replaces the familiar 9-character
Material ID. This allows maximum flexibility for ordering many different combinations of plug ends, cordage types, colors and
lengths. Please use SYSTIMAX Copper Patch Cord Product Identifier (in Copper Reference Section) for ordering information or
contact your SYSTIMAX BusinessPartner.

Physical Specifications:

Contact Material: Phosphor bronze

Contact Plating: Gold 50 micro-inch (1.27 microns)
Nickel 100 micro-inch (2.54 microns)
Insertion Life: 750 minimum
Plug Material: Polycarbonate UL-rated 94 V-O
Operating Temperature: 14F to 140F (-10C to 60C)

PowerSUM

Electrical Specifications:
TIA/EIA Category: 5e
UL and cUL: CM (cordage)

Product Number

Detailed Description

CPC Code

D8PS

PowerSUM Double Ended Cord

CPC6642

D8PS-SE

PowerSUM Single Ended 117 Cord

CPC6442

D8PS-A Wired

PowerSUM T568A Wired Cord

CPC6641

52

25-Pair Category 5 UTP,

61 Series Cable
Non Plenum 1061
The 25-pair 1061 cable is composed of 24 AWG bare solid copper
conductors insulated with high density polyolefin. The insulated
conductors are tightly twisted into pairs, stranded into mini-units and jacketed
with a SYSTIMAX SCS specially formulated PVC jacket. User-friendly standard
25-pair PIC color coding minimizes confusion when terminating on SYSTIMAX
SCS distribution hardware and Category 5, 25-pair, telco-type, 525 connectors.

Physical Specifications:

Electrical Specifications:

Weight: 113 lbs/1,000 ft (51.26 kg/304.8 m)

Nominal Jacket Thickness: 0.027 in (0.69 mm)
Nominal Outside Diameter: 0.52 in (13.2 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Outside Diameter: 0.520 in (13.2 mm)
Gauge: 24 AWG

NVP (fastest pair @ 10 MHz): 70%

Maximum DC Resistance: 9.38 Ohms/100 m
Maximum DC Resistance Unbalance: 5%
Maximum Mutual Capacitance at 1 kHz: 14 nF/100 m
Standards: TIA/EIA 568A Category 5
UL and cUL: CMR

Product Number

Pair Count

Color

Length

Package

Material ID

1061025CSL R1000

25

Slate

1,000 ft (305 m)

Reel

107287484

1061025CSL RVAR

25

Slate

Variable Length

Reel

107222762

1061025C1SL R4000*

25

Slate

4,000 ft (1,220 m)

Reel

760003210

1061025FSL 25/24 RVAR**

25

Slate

Variable Length

Reel

760026500

1061025FSL 25/24 CUSTL**

25

Slate

Custom Length

Reel

760026492

1061025FSL 25/24 R1000**

25

Slate

1,000 ft (305 m)

Reel

760026518

1061025FSL 25/24 R4000**

25

Slate

4,000 ft (1,220 m)

Reel

760026526

*Austel
**Asia Pacific

Plenum 2061

The 25-pair 2061A cable is UL verified Category 5 and UL listed type CMP for use in air return handling spaces. The cable has a
user-friendly standard 25-pair PIC color coding scheme, which minimizes confusion when terminating on SYSTIMAX SCS distribution hardware and the Category 5, 25-pair telco-type 525 Connector. The cable conductors are insulated with FluorinatedEthylene-Propylene (FEP), twisted into pairs, stranded into mini-units and jacketed with Plenum rated material.

Physical Specifications:

Electrical Specifications:

Weight: 104 lbs/1,000 ft (47.2 kg/304.8 m)

Nominal Jacket Thickness: 0.012 in (0.31 mm)
Nominal Outside Diameter: 0.46 in (11.7 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 24 AWG

NVP (fastest pair @ 10 MHz): 75%

Maximum DC Resistance: 9.38 Ohms/100 m
Maximum DC Resistance Unbalance: 5%
Maximum Mutual Capacitance at 1 kHz: 4.6 nF/100 m
Standards: TIA/EIA 568A Category 5
UL and cUL: CMP

Product Number

Pair Count

Color

Length

Package

Material ID

2061025AWH R1000

25

White

1,000 ft (305 m)

Reel

107369845

2061025AWH R4000

25

White

4,000 ft (1,220 m)

Reel

107995011

2061025ABL R1000

25

Blue

1,000 ft (305 m)

Reel

107871477

53

PowerSUM

Low Smoke Zero Halogen 3061

The 25-pair 3061A Low Smoke Zero Halogen (LSZH) cable is composed of 0.511 mm (24 AWG) bare solid copper conductors
insulated with high density polyolefin. The 3061A cable has a user-friendly standard 25-pair PIC color coding scheme, which
minimizes confusion when terminating on SYSTIMAX SCS distribution hardware and the Category 5, 25-pair telco type 525
connector.

Physical Specifications:

Electrical Specifications:

Weight: 116 lbs/1,000 ft (52.6 kg/304.8 m)

Nominal Jacket Thickness: 0.027 in (0.61 mm)
Nominal Outside Diameter: 0.54 in (12 mm)
Maximum Pulling Tension: 25 lbs (11.34 kg)
Operating Temperature: -4F to 140F (-20C to 60C)
Gauge: 24 AWG

NVP (fastest pair @ 10 MHz): 75%

Maximum DC Resistance: 9.38 Ohms/100 m
Maximum DC Resistance Unbalance: 5%
Maximum Mutual Capacitance at 1 kHz: 4.6 nF/100 m
Standards: TIA/EIA 568A Category 5
IEC 754 part 2, Non-halogen based on pH and conductivity
measurements
IEC 1034 part 2, Smoke emission
IEC 332 part 3, Flammability and flame retardant
NES 713: Toxicity index

Product Number

Pair Count

Color

Length

Package

Material ID

3061025AWH R1000

25

White

1,000 ft (305 m)

Reel

107754350

3061025AWH R4000

25

White

4,000 ft (1,220 m)

Reel

107754368

3061025AWH RVAR

25

White

Variable Length

Reel

107754343

PowerSUM

54

2500 and 2512

Modular Patch Panel
The 2500 Category 5, PowerSUM Modular Patch Panel
provides 8-pin modular patch on the front of the panel and
female, 50-pin connections (patch) on the back.
The 2512 Category 5, PowerSUM Modular Patch Panel
provides two pairs to each 8-pin modular patch. Pair one
is terminated on pins 1 and 2 and pair two is terminated
on pins 3 and 6. Therefore, one 50-pin connector serves 12
jacks.
The 2512CAT5PS is wired to the IEEE 802.3, Ethernet 100BASE-TX and 100BASE-T2 standard.

Physical Specifications:

Height: 24-Port: 1.75 in (4.38 cm)

48-Port: 3.50 in (8.83 cm)
Width: 19.0 in (48.26 cm)
Depth: 1.60 in (4.06 cm)
Wire Termination Type: Insulation displacement (ID), gas tight
Wire Size:
Conductor Type: Solid or stranded (7 strands)
Size: 26/24/22 AWG (0.40/0.51/0.64 mm)
Insulation Type: All plastic insulates, including: PVC, irradiated PVC,
Nylon, Polyethylene, Polypropylene, PTFE, Polyurethane, Teflon
Mechanical Data:
Plug Insertion Life: 750 minimum
Wire Insertion Force: 24 AWG=13-28 lbs (58-125 N)
Wire Retention: 24 AWGtypical pull out force
X-axis=10.6 lbs (47.3 N)
Y-axis=10.6 lbs (47.3 N)
Z-axis=2.4 lbs (10.7 N)
Environmental Conditions:
Temperature Range:
Storage: -40F to 158F (-40C to 70C)
Operational: 14F to 140F (-10C to 60C)
Relative Humidity: (operational) maximum, non-condensing 93%
Materials:
Plastic components: Polycarbonate, self-extinguishing
Flammability Rating: UL-rated 94 V-O
Oxygen Index: 28.5% minimum
Contact Material: Phosphor Bronze

Electrical Specifications:

Insulation Resistance: 500 megaohms minimum

Current Rating: 1.5 A at 68F (20C)
TIA/EIA Category: 5
Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,
contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to
exposed conductive surface
UL and cUL Listed

PowerSUM

Product Number

Wiring

Number of Ports

Material ID

2500CAT5PS2-24B

T568B

24

108236142

2500CAT5PS2-48B

T568B

48

108236159

2500CAT5PS2-24A

T568A

24

108236126

2500CAT5PS2-48A

T568A

48

108236134

2512CAT5PS2-48

100BASE-TX, 100BASE-T

48

108236167

55

25-Pair Category 5,
Connectors and Cable
Assemblies
The 525 Connectors are used to terminate 25-pair cables. The
available configurations are: 90 degree, in-line, angled and jack.
The 525 cables consist of Category 5, 25-pair cable, connectorized with either one or two 525 connectors. These
plug ended cables are available in single-ended (SE) and
double-ended (DE) configurations.
The 525 connector is compatible with industry standard
25-pair connectors while also providing keyed Category
5 connections with equipment using this feature. In addition, their unique design using
crosstalk reduction techniques providing a 6 dB margin assures Category 5 performance throughout systems that use
multiple connectors.
The 525 assemblies with an angled (110 degree) end were specifically designed for connection to electronics equipment
requiring a 50-pin telco type connector. The 50-pin assembly is downward compatible and can be used to support
10BASET electronics or 100BASET or 155 Mbps ATM applications. The right and left versions of the angle-mount
connectorized cable assembly allow for flexibility in routing the cords as they exit the equipment.
The in-line (180 degree) end of the 50-pin cable assembly was specifically designed for connection to our 100BASET (50-pin
Category 5) modular patch panel.
The raw end of the cable assembly is designed for termination directly onto the back of a modular patch panel.
For cable assemblies, refer to the SYSTIMAX online catalog or your local SYSTIMAX representative.

Physical Specifications:
PowerSUM

Contact Plating: Gold 30 micro-inch (0.76 microns)

Nickel 50 micro-inch (1.27 microns)
Contact Force: 100 grams minimum
Insertion Life: 200 minimum
Operating Temperature: 14F to 140F (-10C to 60C)

Electrical Specifications:

TIA/EIA Category: 5
Maximum DC Resistance: 0.30 Ohms/100 m

Product Number

Type

Qty/Pkg

Material ID

525-PA-003

90 Degree Plug

100

107487514

525-JA-003

90 Degree Jack

100

107487498

525-AP-003

Angled Plug

100

108036732

525-CP-003

In-line Plug

100

107958233

56

Ruggedized Connectivity
Solution for Harsh
Environments
The SYSTIMAX Ruggedized Connectivity Solution is designed
to support applications such as military telecommunications
equipment, utility instrumentation panels, pharmaceutical
laboratories and equipment, industrial ethernet sensors and
factory floor automation. The SYSTIMAX ruggedized product family
includes a ruggedized connector housing for Category 5e and
Category 6, the respective configurable patch cords, protective
caps and faceplates.
The SYSTIMAX ruggedized connectors meet IP65 & IP67
environmental testing for use in industrial applications, where
potential exposure to liquid and dust is expected. The connector
consists of a jack assembly and a plug assembly, that form an IP65 & IP67 rated seal. The jack assembly
accepts a standard SYSTIMAX M-Series PowerSUM or GigaSPEED XL outlet, and mounts in a corrosion resistant faceplate that can
be mounted to a standard single or double wall outlet box. The plug assembly is pre-assembled to a SYSTIMAX GS8E patch cord.
The plug assembly also provides an IP67 rated seal with the cord, as well as strain, flex and impact relief.

Features and Benefits:

Audible, tactile and visual confirmation of engagement

Avoids accidental disconnects
Resistant to water and dust exposure and humidity
Mechanical cable strain, flex and impact relief
Robust keying of jack housing to faceplate

Physical Specifications:

Faceplate Width: 2.75 in (single gang) (7 cm)

4.56 in (double gang) (11.6 cm)
Faceplate Height: 4.5 in (11.4 cm)
Size of Opening to Accept Receptacle: approx 1.1 in (2.8 cm)
Plug Diameter: 1.15 in (2.9 cm)
Material: High impact plastic
Temperature: -13F to 185F (-25C to 85C)

Standards:

IP65 & IP67

UL and cUL Listed
Additional
Copper
Connectivity

Product Number

Detailed Description

Material ID

MIR-RJ45

M-Series Ruggedized Receptacle

760042960

MIR-CAP

Ruggedized Receptacle - Cap

760042978

IR11SP

FaceplateSingle Gang1-PortStainless Plate

760042994

IR12SP

FaceplateSingle Gang2-PortStainless Plate

760043000

IR22SP

FaceplateDouble Gang2-PortStainless Plate

760043026

IR24SP

FaceplateDouble Gang4-PortStainless Plate

760043018

Detailed Description

CPC Code

GS8E-IP Ruggedized Plug to GS8E, Coiled Strain Relief

CPCC312

GS8E-IP Ruggedized Plug to Un-terminated, Coiled Strain Relief

CPCC412

GS8E-IP Ruggedized Plug to Ruggedized Plug, Coiled Strain Relief

CPCCC12

GS8E-IP Ruggedized Plug to GS8E, Domed Strain Relief

CPCD312

GS8E-IP Ruggedized Plug to Un-terminated, Domed Strain Relief

CPCD412

GS8E-IP Ruggedized Plug to Ruggedized Plug, Domed Strain Relief

CPCDD12

57

Universal Modular
Patch Panel
SYSTIMAX Universal Modular Patch Panel is an 19 inch
rack mounted panel. It accepts up to 36 (24 for GigaSPEED X10D) M-Series
information outlets and other M-Series outlets for patching and interconnection in the
telecommunications closet or equipment room.
This modular concept allows termination of outlets in the field, coupled with high density and the ability to integrate InstaPATCH
pre-terminated fiber modules in the same footprint, it is an ideal data center solution. It consists of a rack mounted base unit,
three slide-in modules with interchangeable front bezels cable management brackets and a flip-down removable front cover for
close-out. The universal modular panel accepts GigaSPEED X10D/XL, PowerSUM and LazrSPEED apparatus.
The panels 1U height maximizes office space. Color coding is possible by use of colored outlets.

Features and Benefits:

Accommodates up to 36 (24 for GigaSPEED X10D) M-Series information outlets for easy termination of 4-pair copper cables,
in addition to coaxial outlets and S-Video and RCA adapters
1U design maximizes rack space
Integrated cable management enables enhanced cable routing
Modularity will support up to three multimedia modules
Three methods of labeling are provided: on the inside of the front cover, on the rear of the base, and on the front of each of
the bezels

Physical Specifications:
Height: 1.72 in (4.4 cm)
Width: 19 in (48.3 cm)
Depth: 4.17 in (10.6 cm)

Additional
Copper
Connectivity

Detailed Description

Material ID

UMP 24-Port Panel Kit (Panel, Brackets, Tie Wraps Screws, Cover and three 8-Port Bezel Kits)

760026682

UMP 36-Port Panel Kit (Panel, Brackets, Tie Wraps Screws, Cover and three 12-Port Bezel Kits)

760026690

UMP Blank Panel Kit (Bezel Kits not included)

760026740

UMP 36-Port Panel without cover

760034736

UMP 24-Port Panel without cover

760034710

UMP Cover Kit

760035501

UMP 8-Port Bezel Kit

760026716

UMP 12-Port Bezel Kit

760026724

Label Kit for UMP 24-Port Panel

760036079

Label Kit for UMP 36-Port Panel

760036087

58

FlexiMAX Patch
Panel
The SYSTIMAX FlexiMAX panel is an alternative modular panel
that allows for patching and interconnection in the telecommunications closet or equipment room. The FlexiMAX 24-port
panel can hold up to 24 MGS500, MGS400 or MPS100E high
density modules (HDMs) (not included). The front appearance
of the panel comprises two rows of square punchouts, which
allows ease of installation and access to the HDMs.

Physical Specifications
Height: 1.72 in (4.4 cm)
Width: 19 in (48.3 cm)
Depth: 4.17 in (10.6 cm)

Detailed Description

Material ID

FlexiMAX High-Density Panel

108356312

FlexiMAX Residential Panel (10 inch)

760026799

M1000P5 MultiMAX
Panel
Designed for premises data and voice networks employing copper
and/or fiber terminations, the M1000P5 MultiMAX Panel is an
aluminum panel that provides for patching or interconnect in
the telecommunications closet or equipment room. Mounting
options for the 3.5 in (8.9 cm) high M1000P5 panel include a
standard EIA 19 in (48.3 cm) rack or a hinged wall mount bracket. Packaged with the panel are mounting collars for up to 24
modular outlets or fiber connections, and two wire guides for
cord management. For copper terminations, the mounting
clips provide a fixture for holding the M-series modular information outlets when terminating conductors and also provide strain relief for the cable when snapped into the panel. Mounting clips also accomodate
the M81LC, M81ST and M81SC for fiber terminations.
In addition to the above and ordered separately are the M1000FSSK (Fiber Spool Storage Kit); the M1000FMK (Fiber Mounting
Kit), for fiber terminations; and the M1000WG (Wire Guides) for cord management. The M1000FSSK mounts on the rear of the
M1000P5, provides fiber storage and manages the slack in the fiber, while maintaining the necessary minimum bending radius.

Physical Specifications:
Height: 3.5 in (8.9 cm)
Width: 19 in (48.3 cm)
Depth: 7 in (17.8 cm)

Product Number

Detailed Description

Material ID

M1000P5

24-Port Panel w/ 25 Mounting Clips, 4 Screws and 2 Wire Guides

108006198

M1000FSSK

Fiber Storage Spool Kit w/ 6 Singlemode Fiber Guides and 3 Wire Guides

107535080

M1000FMK

Duplex SC Fiber Mounting Kit w/ 1 Collar Lock

107535072

M1000WG

Wire Guide

107382525

M1000PMC-B

Mounting Collars (pack of 25)

108006206

59

Additional
Copper
Connectivity

Category 3, UTP Cable

Category 3 cable is used in SYSTIMAX SCS voice and low speed data
applications. Consists of 24 AWG solid copper conductors insulated
with color coded PVC. UL and cUL compliant.

Non Plenum1010
Physical Specifications:

Weight: 4-Pair: 18.2 lbs/kf (27.2 kg/km)

25-Pair: 95.8 lbs/kf (142.7 kg/km)
50-Pair: 189.9 lbs/kf (283.0 kg/km)
100-Pair: 361.8 lbs/kf (539.1 kg/km)
Outside Diameter: 4-Pair: 0.17 in (4.6 mm)
25-Pair: 0.40 in (10.2 mm)
50-Pair: 0.54 in (13.7 mm)
100-Pair: 0.73 in (18.5 mm)
Gauge: 24 AWG

Additional
Copper
Connectivity

Product Number

Pair Count

Color

Length

Package

Material ID

1010004AGY W1000

Gray

1,000 ft (305 m)

We Tote

106062524

1010004ABL W1000

Blue

1,000 ft (305 m)

We Tote

106300098

1010004ABE W1000

Beige

1,000 ft (305 m)

We Tote

106300106

1010004AWH W1000

White

1,000 ft (305 m)

We Tote

108689134

1010025AGY R1000

25

Gray

1,000 ft (305 m)

Reel

106824329

1010050AGY R1000

50

Gray

1,000 ft (305 m)

Reel

106824378

1010100AGY R1000

100

Gray

1,000 ft (305 m)

Reel

106824469

Plenum 2010
Physical Specifications:

Weight: 4-Pair: 18.0 lbs/kf (26.8 kg/km)

25-Pair: 116.2 lbs/kf (173.1 kg/km)
50-Pair: 215.6 lbs/kf (321.2 kg/km)
100-Pair: 410.8 lbs/kf (612.1 kg/km)
Outside Diameter: 4-Pair: 0.18 in (4.6 mm)
25-Pair: 0.47 in (12.0 mm)
50-Pair: 0.63 in (16.0 mm)
100-Pair: 0.84 in (21.4 mm)
Gauge: 24 AWG

Product Number

Pair Count

Color

Length

Package

Material ID

2010004BWH R1000

White

1,000 ft (305 m)

Reel

107078396

2010004BWH W1000

White

1,000 ft (305 m)

We Tote

107078388

2010004BGY R1000

Gray

1,000 ft (305 m)

Reel

107256745

2010004BGY W1000

Gray

1,000 ft (305 m)

We Tote

107256737

2010004BYL R1000

Yellow

1,000 ft (305 m)

Reel

107256786

2010004BYL W1000

Yellow

1,000 ft (305 m)

We Tote

107078412

2010004BBL W1000

Blue

1,000 ft (305 m)

We Tote

107078404

2010004BBL R1000

Blue

1,000 ft (305 m)

Reel

107819146

2010025BWH R500

25

White

500 ft (152 m)

Reel

700211394

2010025BWH R1000

25

White

1,000 ft (305 m)

Reel

107765992

2010050BWH R1000

50

White

1,000 ft (305 m)

Reel

107766040

2010100BWH R1000

100

White

1,000 ft (305 m)

Reel

107766057

60

Low Smoke Zero Halogen 3010

Physical Specifications:

Weight: 25-Pair: 251.5 lbs/mi (184 kg/km)

100-Pair: 862.5 lbs/mi (631 kg/km)
Outside Diameter: 25-Pair: 0.49 in (12.5 mm)
100-Pair: 0.89 in (22.5 mm)
Gauge: 24 AWG

Product Number

Pair Count

Color

Length

Package

Material ID

3010025BSL 25/24 RVAR

25

White

3,281 ft (1000 m)

Reels

760010900

3010100BSL 100/24 RVAR

100

White

1,000 ft (305 m)

Reels

760010918

ARMM Riser Cable

ARMM Category 3 Riser Cable is used in riser shafts where a flame retardant sheath is necessary to meet NEC low flame
requirements. It can be used without conduit. The cable consists of a core of solid copper conductors insulated with polyethylene
covered by a PVC skin. The core is covered by polypropylene film and overlaid with a corrugated aluminum shield, which is
adhesively bonded to an outer jacket of PVC plastic to form an ALVYN sheath.

Physical Specifications:
Gauge: 24 AWG

Product Number Pair Count Color

Cable Length per Reel Outside Diameter

Weight

ARMM-0025

25

Dark Gray

12,600 ft (3.8 km)

0.53 in (1.36 cm)

130 lbs/1,000 ft (19.35 kg/100 m)

Reel

107526873

ARMM-0050

50

Dark Gray

12,600 ft (3.8 km)

0.65 in (1.67 cm)

220 lbs/1,000 ft (32.74 kg/100 m)

Reel

107527111

ARMM-0100

100

Dark Gray

12,600 ft (3.8 km)

0.89 in (2.28 cm)

390 lbs/1,000 ft (58.04 kg/100 m)

Reel

107527129

ARMM-0200

200

Dark Gray

8,400 ft (2.6 km)

1.09 in (2.79 cm)

730 lbs/1,000 ft (108.64 kg/100 m)

Reel

107527285

ARMM-0300

300

Dark Gray

5,040 ft (1.5 km)

1.30 in (3.33 cm)

1,060 lbs/1,000 ft (157.75 kg/100 m) Reel

107527293

ARMM-0400

400

Dark Gray

4,200 ft (1.3 km)

1.48 in (3.79 cm)

1,390 lbs/1,000 ft (206.86 kg/100 m) Reel

107527301

ARMM-0600

600

Dark Gray

2,590 ft (0.8 km)

1.80 in (4.62 cm)

2,070 lbs/1,000 ft (308.06 kg/100 m) Reel

107527319

ARMM-0900

900

Dark Gray

2,160 ft (0.6 km)

2.15 in (5.51 cm)

3,040 lbs/1,000 ft (452.41 kg/100 m) Reel

107527327

ARMM-1200

1,200

Dark Gray

1,430 ft (0.4 km)

2.42 in (6.21 cm)

4,050 lbs/1,000 ft (602.72 kg/100 m) Reel

107527335

ARMM-1500

1,500

Dark Gray

1,220 ft (0.4 km)

2.75 in 7.05 cm)

5,090 lbs/1,000 ft (757.49 kg/100 m) Reel

107527343

ARMM-1800

1,800

Dark Gray

1,070 ft (0.3 km)

2.94 in (7.54 cm)

6,000 lbs/1,000 ft (892.92 kg/100 m) Reel

107527350

61

Package Material ID

Additional
Copper
Connectivity

M1 Category 3,
Information Outlets
The M1BH Modular Telecommunications Outlets are designed
for voice, low speed networks, and Integrated Services Digital
Network (ISDN) applications requiring an 8-position/8-conductor outlet. The M1BH outlets are designed to snap into
any M-Series modular faceplate, frame or surface-mount
box. A special lubrication process provides for a minimum of
750 plug insertions.
The M1BH outlet uses the universal wiring labels which display both the TIA/EIA T568A and TIA/EIA T568B wiring.
The M1AH modular telecommunications outlets are designed for voice and other applications requiring a 6-position/6-conductor
USOC wired outlet. The M1AH outlets are designed to snap into any M-series modular faceplate, frame or surface-mount box.

Physical Specifications:

Additional
Copper
Connectivity

Dimensions: HxWxD: 0.8 in x 0.8 in x 1.2 in (2.0 cm x 2.0 cm x 3.1 cm)

Universal A/B labeling
Plastic Material: High-impact, flame retardant, thermoplastic
Flammability Rating: UL-rated 94 V-0
Operating Temperature: 14F to 140F (-10C to 60C)
Storage Temperature: -40F to 158F (-40C to 70C)
Humidity: 95% (non-condensing)
Contact Material & Plating: Copper alloy, 100 micro-inch (2.54
microns) bright solder over 100 micro-inch (2.54 microns) nickel
underplate. Insulation displacement connectors accept solid or
stranded wire
Nominal Solid Conductor Diameter: 0.016 in to 0.025 in
(0.40 mm to 0.64 mm)
Nominal Stranded Conductor Diameter: 0.020 in to 0.025 in
(0.51 mm to 0.64 mm)
Insulation Size: 0.030 in to 0.046 in (0.76 mm to 1.17 mm)
Insulation Type: All plastics insulates, including: Polyethylene,
Polypropylene, PTFE, Polyurethane, Nylon and FEP
Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold
plating over 100 micro-inch (2.54 microns) nickel underplate
Plug Retention Force: 30 lbs (133 N) minimum between modular
plug and jack
Plug Insertion Life: 750 minimum insertions of an 8-position IEC
60603-7 compliant plug
Plug/Jack Contact Force: 100 grams minimum per contact using
FCC approved plug

Electrical Specifications:

TIA/EIA Category: 3
Data Rate: Compatible with 10 Mbps Institute of Electrical and
Electronics Engineers Inc. (IEEE) 802.3 10BASE-T applications.
Compatible with 16 Mbps IEEE 802.5 token ring applications.
Insulation Resistance: 500 megaohms minimum
Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,
contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to
exposed conductive surface
Current Rating: 1.5 A at 68F (20C)
UL and cUL Listed

Product Number

Color

Qty/Pkg

Wiring

Material ID

M1BH-H-003

Electrical Black

T568A/T568B

107321697

M1BH-H-112

Electrical Orange

T568A/T568B

107346744

M1BH-H-123

Yellow

T568A/T568B

107321705

M1BH-H-226

Green

T568A/T568B

107321713

M1BH-H-246

Electrical Ivory

T568A/T568B

107321721

M1BH-H-262

Electrical White

T568A/T568B

107321739

M1BH-H-270

Electrical Gray

T568A/T568B

107321747

M1BH-H-317

Red

T568A/T568B

107321754

M1BH-H-318

Blue

T568A/T568B

107321762

M1BH-H-215

Misty Cream

T568A/T568B

108480575

62

Miscellaneous Outlets
Product Number

Color

Qty/Pkg

Wiring

Material ID

M1AH-003 Module

Black

6-Pin Jack

107322133

M1AH-112 Module

Orange

6-Pin Jack

107322141

M1AH-246 Module

Ivory

6-Pin Jack

107322158

M1AH-262 Module

White

6-Pin Jack

107322166

M1AH-270 Module

Gray

6-Pin Jack

107322174

M1AH-215 Module

Misty Cream

6-Pin Jack

108480609

M1BHU-246 Module

Ivory

USOC

107322224

M1BHU-262 Module

White

USOC

107322240

M1BHU-112 Module

Orange

USOC

107346801

Hand Held Terminating Device

Black

N/A

760034215

The outlets listed in this product table are not covered by the SYSTIMAX 20-Year Extended Product Warranty and Application Assurance.

Additional
Copper
Connectivity

63

110 Wiring Blocks

The 110 Wiring Block is used to terminate cable pairs and permits a
neat, organized arrangement of cables behind the block.
It is a flame retardant molded plastic block with horizontal strips,
each of which secures and organizes 25 cable pairs. The index strips
are marked with five tip colors to help the installer locate pairs
quickly.
The blocks accomondate 22 through 26 AWG conductors and can
be mounted directly on wall surfaces without backboards.
There are two types of 110 Wiring Blocks: A wiring blocks and D wiring blocks. The 110A Wiring Block is equipped with legs
to provide space behind the block; also, the space on the sides can be used as a vertical jumper trough. The 110D Wiring Block is
built without legs and is used where depth is restrictive. These blocks are used in conjunction with the 110C Connecting Blocks,
which are ordered separately.
The 110RA 12/38 Rivet Kits may be used to secure the 110 blocks without legs on to the 110 Patch Panel System backboards.
The 88A2 is a molded plastic clip-on part that attaches to the legs of the 110AW2 wiring block.

Physical Specifications:

Height: 25/50-Pair: 1.75 in (4.45 cm)

100-Pair: 3.59 in (9.12 cm)
300-Pair: 10.79 in (27.41 cm)
Width: A block, 10.72 in (27.23 cm); D block, 8.5 in (21.6 cm)
Depth: A block, 3.25 in (8.25 cm); D block, 1.4 in (3.6 cm)

Electrical Specifications:
UL and cUL Listed

110 Wiring Blocks (Without 110C Connecting Blocks)

Additional
Copper
Connectivity

Product Number

Pair Count

Block Type

Material ID

110AW2-100
110AW2-300
110DW1-25
110DW1-50
110DW2-100
110DW2-300

100
300
25
50
100
300

A
A
D
D
D
D

107059891
107059917
107256653
107256661
107059909
107059925

110 Field Terminated Cross-Connect System Terminal Blocks

Product Number

Pair Count

Block Type

Material ID

110AA2-100FT
110AB2-100FT
110AC2-100FT
110AA2-300FT
110AB2-300FT
110AC2-300FT

100
100
100
300
300
300

A
A
A
A
A
A

107058901
107058919
107058927
107058935
107058943
107058950

Rivet Kits
Product Number

Count

Block Type

Material ID

110RA-12 KIT
110RA-38 KIT

12
38

A
A

107611626
107611634

Retainer
Product Number

Detailed Description

Material ID

88A2

Retainer (Retains cross-connect wires and clips onto 110AW2 blocks)

107267452

64

110C Connecting Blocks

The 3-Pair (110C-3), 4-Pair (110C-4) and 5-Pair (110C-5) Connecting Blocks consist
of a 1-piece, flame retardant, molded plastic housing containing solder-plated
quick clips that cut through the insulation on 22 through 26 AWG conductors as
they are seated onto the wiring block.
The front of the connecting block is color-coded, allowing rapid pair identification and termination. The connecting blocks seat
on the 110 Wiring Block and provide an electrically gas tight connection between cable conductors terminated on the wiring
block and Cross-connect Wire or 110 Patch Cords.

Physical Specifications:
Height:
Width:
Depth:

0.25 in (0.64 cm)

3-Pair: 0.9 in (2.3 cm)
4-Pair: 1.2 in (3.05 cm)
5-Pair: 1.5 in (3.8 cm)
0.93 in (2.36 cm)

Product Number

Pair Count

Qty/Pkg

Material ID

110C-3

10

103801239

110C-4

10

103801247

110C-5

10

103801254

110 Labels and Holders

The 110 Label assembly consists of a clear label holder (188UT1-50) and colored label
inserts (available in green, purple, yellow, blue, gray, brown, white and orange).
Additional
Copper
Connectivity

The insert labels contain vertical lines spaced on the basis of circuit size (3-, 4-, 5 pair).
The transparent label holder snaps onto the wiring block to clearly identify wiring
functions, provide circuit information and conceal and protect the cable conductor
terminations.
The labels will not interfere with placing, tracing or removing jumper wires.
Product Number

Detailed Description

Color

Pair Count

188UT1-50

Label Holder

Transparent

110YB2-4500L

Label

Yellow

90

106657232

110YA2-4500L

Label

Yellow

90

106657158

110WB2-4500L

Label

White

90

106657216

110WA2-4500L

Label

White

90

106657133

110SA2-4500L

Label

Gray

90

106657166

110PB2-4500L

Label

Purple

90

106657190

110PA2-4500L

Label

Purple

90

106657117

110GB2-4500L

Label

Green

90

106657182

110GA2-4500L

Label

Green

90

106657109

110BB2-4500L

Label

Blue

90

106657174

110BA2-4500L

Label

Blue

90

106657091

188BB1-100

Designation Strips

Blue

102579810

188BG1-100

Designation Strips

Blue

103103701

65

Qty/Pkg

Material ID

103895504

110 Patch Panel

System Terminal Blocks
The 110 Patch Panel System Terminal Blocks are used to terminate
connectorized or raw-ended cable pairs.
Connecting blocks in 3-, 4-, or 5-pair sizes may be specified to match the
pairs per circuit of the system in use. Transparent label holders allow you
to insert circuit identification labels.
Field terminated terminal blocks, which allow direct termination of building
cables, are also available in 300- and 900-pair sizes.

Physical Specifications:

Electrical Specifications:

Height: See Product List Table

Width: 8.5 in (21.60 cm)
Depth: 8.05 in (20.45 cm)

Additional
Copper
Connectivity

UL and cUL Listed

Product Number

Height

Termination

Pair

Pair Count

Material ID

110PA2-300FT

24.68 in (62.69 cm)

Field Terminated

300

107058802

110PB2-300FT

24.68 in (62.69 cm)

Field Terminated

300

107058810

110PC2-300FT

24.68 in (62.69 cm)

Field Terminated

300

107058828

110PA2-900FT

61.70 in (156.72 cm)

Field Terminated

900

107058851

110PB2-900FT

61.70 in (156.72 cm)

Field Terminated

900

107058869

110PC2-900FT

61.70 in (156.72 cm)

Field Terminated

900

107058877

66

110 Connector System

Mounting Brackets
The 110 Mounting Brackets are used for mounting the 110 Connector
System hardware on a 19 in (48.3 cm) wide frame rack or a data cabinet.
On the rear of the brackets are cable support rings to secure cable that
is routed through openings in the mounting bracket to the wiring
blocks. Cross-connect wire or patch cords are routed from the wiring
blocks through the troughs to the side of the frame to facilitate wire
management. These mounting brackets can be mounted one on top of
the other to support pair requirements.
The 110RD2-100-19 Mounting Bracket is designed to mount two
110DW1-25 or 110DW1-50 Wiring Blocks and two 110B3 Troughs on an EIA 310C 19 in wide frame.
The 110RD2-200-19 Mounting Bracket is designed to mount two 110DW2-100 Wiring Blocks and two 110B3 Troughs on an
EIA 310C 19 in wide frame.
The 110RP2-600-19 Mounting Bracket has a set of three 1 in bars that attach to the 19 in frame to support two 110 preconnectorized patch panels or patch panel and 188 Backboard and connector bracket.

Physical Specifications:

Height: 110RD2-100-19: 5.13 in (13.0 cm)

110RD2-200-19: 7 in (17.78 cm)
110RP2-600-19: 1 in (2.54 cm)
Width: 19 in (48.3 cm)

Product Number

Qty/Pkg

Material ID

110RD2-100-19

107535593

110RD2-200-19

107535585

110RP2-600-19

107098816

Additional
Copper
Connectivity

67

110 Patch Panel

System Backboard
The 188C3 and 188D3 110 Patch Panel System Backboards are metal panels
equipped with distributing rings that provide the vertical paths for running
patch cords or jumpers between 110 Patch Panel System Terminal Blocks.

Physical Specifications:
Width: 8.5 in (21.60 cm)
Depth: 8 in (20 cm)

Product Number

Detailed Description

Height

Material ID

188C3

Used with 900-Pair Terminal Blocks

61.8 in (157 cm)

107151185

188D3

Used with 300-Pair Terminal Blocks

24.0 in (61 cm)

107151193

188B Backboard
Additional
Copper
Connectivity

The 188B1 or 188B2 Backboard is made of metal and has two

closed, formed, plastic distribution rings. It is used with 110A Wiring
Blocks to arrange jumper wires running between columns of wiring
blocks. The backboard is placed between fields, where it serves as
a horizontal trough for the wires and provides space to change the
direction of jumpers. One backboard is used for each vertical
column of 110A Wiring Blocks.The 188B2 Backboard is the same as
the 188B1 Backboard except it has legs to allow space for routing the
cable behind the backboard.

Physical Specifications:
Height: 188B1: 6.50 in (16.50 cm)
188B2: 6.50 in (16.50 cm)
Width: 188B1: 10.72 in (27.23 cm)
188B2: 10.75 in (27.31 cm)
Depth: 188B1: 3.50 in (8.90 cm)
188B2: 4.82 in (11.45 cm)

Product Number

Detailed Description

Material ID

188B1

Without Legs

102689569

188B2

With Legs

104405113

68

110 Jumper Troughs

The 110 Jumper Trough is a white, flame retardant, molded,
plastic frame that accommodates patch cords or crossconnect wire. It is placed between each 100-pair wiring
block and at the top of each column, where it serves as a
horizontal trough for routing patch cords and crossconnect wire. The trough is available with legs (110A3 Trough)
for use with the 110A Wiring Block or without legs (110B3
Trough) for use with the 110D Wiring Block or Patch Panel
Terminal Block. The 110A2 Distribution Ring is used to route
cross-connect wire or patch cords alongside the wiring blocks.

Physical Specifications:
Height: 2.64 in (6.7 cm)
Width: 110A3: 10.72 in (27.30 cm)
110B3: 8.44 in (21.60 cm)
110A2: 0.58 in (1.5 cm)
Depth: 110A3: 5.25 in (11.91 cm)
110B3: 3.50 in (6.83 cm)
110A2: 3.25 in (8.26 cm)

Product Number

Detailed Description

Material ID

110A3

With Legs

107831133

110B3

Without Legs

107831141

110A2

Distribution Ring

107214405

Additional
Copper
Connectivity

110 Jack Panel System

The 110 Jack Panel System consists of 8-pin modular jacks,
mounted in a metallic holder and wired to a standard 110-Type
Wiring Block.
The 110AB-CAT5 and 110PB-CAT5 Modular Jack Panels with
T-568A and T-568B wiring are connecting hardware apparatus
products used for the termination and inter-connection of
voice and/or data circuits in premises wiring systems. These
jack panels consist of a 110 insulation displacement connector
(IDC) field and an 8-pin modular jack through the printed wiring board (PWB).
This product is TIA/EIA Category 5 compliant.
Product Number

Detailed Description

Wiring

Material ID

110AB-CAT5PS-JP12B

12 Modular Jacks on a 100-Pair Wiring Block (With Mounting Legs)

T568B

107920704

110AB-CAT5PS-JP12A

12 Modular Jacks on a 100-Pair Wiring Block

T568A

107920753

110BB-CAT5PS-JP12FTB

12 Modular Jacks on a 110DW2 100-Pair Wiring Block (Without Mounting Legs)

T568B

107920738

110AB-CAT5PS-JP36B

36 Modular Jacks on a 300-Pair Wiring Block (With Mounting Legs)

T568B

107920712

110AB-CAT5PS-JP36A

36 Modular Jacks on a 300-Pair Wiring Block

T568A

107920761

110PB-CAT5PS-JP108B

108 Modular Jacks on a 900-Pair Patch Panel Terminal Block

T568B

107920746

69

110 Patch Cords

and Adapter Cords
The 110 cord family provides for the administration and
interconnection of data and voice circuits. All cords are
manufactured with 1074 cordage. The round cordage consists
of 24 AWG tinned copper, stranded conductors insulated
with high density polyethylene. The insulated conductors are
tightly twisted into individual pairs and jacketed with flame
retardant PVC.
Patch cords are orderable using a 14-character feature
configuration coding scheme which replaces the familiar
9-character Material ID. This allows maximum flexibility for ordering many
different combinations of plug ends, cordage types, colors and lengths. Please use SYSTIMAX Copper Patch Cord
Product Identifier (in Copper Reference Section) for ordering information or contact your SYSTIMAX BusinessPartner.

Physical Specifications:

Electrical Specifications:

Plastic Material: Polycarbonate Blend

Flammability Rating: UL-rated 94 V-O
Contact Material: Phosphor Bronze
Contact Plating: Gold 2 to 5 micro-inch (0.051 to 0.128 microns)
Nickel 75 micro-inch (1.91 microns)
Plug Insertion Life: 200 minimum
Operating Temprature: 14F to 140F (-10C to 60C)

Additional
Copper
Connectivity

UL and cUL: CM (cordage)

Detailed Description

Pair Count

CPC Code

110GS to 110GS

CPC8842

110GS to 110GS

CPC8852

110GS to 110GS

CPC8862

110GS to D8PS

CPC8652

A Wired 110GS to D8PS PowerSUM

CPC8641

B Wired 110GS to D8PS PowerSUM

CPC8642

A Wired 110GS to GS8E GigaSPEED (Cat 6)

CPC8341

B Wired 110GS to GS8E GigaSPEED (Cat 6)

CPC8342

70

110 Tools
The 788H1 Impact Tool is used for insertion only, or to insert and trim up to
five wires at a time on the wiring block and to seat the 110C Connecting
Block. The handle is fitted with a rubber grip for better gripping and
comfort. The 788M2 aluminum frame replacement head for the tool can
be ordered separately.
The 788E (Electrical) Tool is a multi-impact, electrically operated, hand
held tool. Like the 788H1, it terminates 5 wires at a time with the same
combination of seat only or seat and cut wires with a minimum change
of the head as well as seating the 3-, 4-, and 5-pair connecting blocks. The
trigger-activated electric solenoid action eliminates the physical exertion
required with other push-down impact tools while ensuring proper termination with uniform punch force. The flexible head rotates in 90 degree
increments and can easily be replaced. A safety slide lock on the trigger
prevents accidental operation. The tool requires a standard 120v current
and features a locking retainer to keep the extension cord from being
detached from the tool cord.
The 788P Pressing Head Assembly is a plastic stuffer required with the
788E Electric Tool and can be used with the 788H1 Tool Kit.
The 788 Kit and 788P Pressing Head Assembly provide a direct
replacement for the 788M1 tool.
The 788 Kit is a kit of 2 blades and is a direct replacement for the 788 Tool Kit (106 981 848).
The 788K1 Wire Retention Tool is used as an aid in holding down cable conductors when removing 110-Type Connecting Block.
The Spudger is a small pencil-shaped plastic tool with a sharp, pointed L-shaped metal pick that is used to lift and remove small
pieces of conductor insulation caught in the 110-Type Wiring Block or between the plastic teeth of the 110-type Connecting
Block.
Product Number

Detailed Description

Material ID

788H1

Impact Tool

108062043

788M2

Replacement Head

107975864

788E

Impact Tool

407732577

788 Kit

Replacement Blades

407732585

788P

Pressing Head Assembly

407742741

788K1

Wire Retention Tool

102655495

KS-22035-L2

Spudger

405423260

71

Additional
Copper
Connectivity

384A Video Adapter

The 384A Video Adapter is a broadband Community Access
Television (CATV) video device that performs common mode
filtering, balancing and impedance matching to provide
connectivity to SYSTIMAX SCS. It permits connectivity
between broadband CATV video distribution equipment.
The 384A is equipped with an F-type male connector plug on one end, and a 12 ft (3.7 m) section of 2-pair cordage with an RJ45
on the other. The RJ45 should be connected to the work area information outlet, or the modular RJ45 jack panel in the telecommunications closet or equipment room. The F-type plug is used to connect to the broadband video distribution equipment.

Physical Specifications:

Electrical Specifications:

Length: Housing: 2.3 in (5.8 cm)

Cable: 12 ft (3.7 m)

Additional
Copper
Connectivity

Bandwidth: 55 MHz - 550 MHz

Input Impedance (Source): 75 Ohms Unbalanced
Output Impedance (Twisted Pair): 100 Ohms Balanced
Common Mode Rejection: >40 dB
Signal To Noise Ratio: >60 dB

Product Number

Detailed Description

Material ID

384A

Broadband Video Adapter

107213605

385DP CATV
Distribution Panel
The 385DP Broadband CATV Distribution Panel allows analog
boadband video distribution over enhanced PowerSUM and
GigaSPEED Solution.
The 19 inch wide rack mountable 385DP Broadband CATV Distribution Panel is a
passive self-terminating 1 by 16 coax-to-UTP CATV distribution solution that provides connectivity over LAN cables.
The 385DP is equipped with an F-type coaxial input connector (female) and 16 8-pin output modular jacks (female). A single
385DP distributes CATV signals for up to 16 locations.
The 385DP is typically installed in a telecommunications closet or equipment room and transmits CATV signals in the horizontal
subsystem to 384A adapters located in the work location.

Electrical Specifications:

Operation Distances: 60 meters - 77 channels for a minimum received signal level of 0 dBmV
100 meters - 28 channels for a minimum received signal level of 0 dBmV
100 meters - 50 channels for a minimum received signal level of -10 dBmV
Bandwidth: 5 MHz - 550 MHz
Emission: Tested to FCC Part 76 and CISPR PUB 22 Class B
Safety: UL, CSA and IEC 950

Product Number

Detailed Description

Material ID

385DP

Broadband CATV Distribution Panel 108120460

72

M81 Series
Coaxial Adapter
The M81BNC-B is an M-Series Modular BNC Coupler
(50 Ohm) Module, designed for data applications.
It can be mounted in any of the M-Series modular
faceplates, surface mount boxes or mounting collars.
The M81C is an M-Series F-81 Coaxial Coupler
(75 Ohms) Module, designed for video applications.
It can be mounted in any of the M-Series modular faceplates,
surface mount boxes or mounting collars.
The M81 is an M-Series modular blank with rear snap-in and used to fill empty ports in M-Series modular faceplates, surface mount
boxes or mounting collars.

Physical Specifications:
M81BNC-B:
Height: 0.69 in (17 mm)
Width: 0.73 in (18 mm)
Depth: 0.60 in (15 mm)
M81C:
Height: 0.69 in (17 mm)
Width: 0.73 in (18 mm)
Depth: 0.50 in (13 mm)

Product Number

Detailed Description

Material ID

M81BNC-B COUPLER

BNC Coupler

108009424

M81C-COUPLER

F-81 Coaxial Coupler

108009432

M81-246 BLANK

Blank, Ivory

106837222

M81-262 BLANK

Blank, White

106837230

73

Additional
Copper
Connectivity

Audio/Video Adapter
The S-Video Outlet uses a 110 IDC (Insulation Displacement
Contact) block to directly terminate to 4-pair building wiring.
Each S-Video module connects to one UTP 4-pair cable.
The S-Video Modular Outlets are compatible with M-Series
modular faceplates, surface mount boxes, modular furniture
faceplates and modular patch panels.
The S-Video or Super VHS (SVHS) Modular Outlets provide
base band video connectivity to 24 AWG UTP SYSTIMAX wiring. Each S-Video
outlet will connect to two pairs of the UTP cables. These outlets provide point-to-point transmission of analog baseband
National Television System Committee (NTSC)/Phase-Alteration Line (PAL)/SECAM S-Video signals.
The RCA Outlets use a 110 IDC block to directly terminate the 4-pair building wiring. RCA outlets are used for connecting audio
and video appliances to 24 AWG UTP SYSTIMAX wiring. Each RCA Outlet will connect to one pair of a UTP cable. The RCA modular
adapters are compatible with M-Series modular faceplates, surface mount boxes, modular furniture faceplates and modular patch
panels. They are offered with Red, White, Black or Yellow inserts. The RCA Outlet Modules housings are offered in white, ivory, gray
or black.

Electrical Specifications:
Attenuation DC 5.5. MHz: 1.5 dB max
Cross Talk: -60 dB at 5.5 MHz
Impedance S-Video and RCA Female Connector: 75 Ohms
UTP 110 Terminal Block: 110 Ohms
Typical Frequency Bandwidth: 4.2 MHz
Luminance Signal: (Y): 1 Vp-p (with 75 Ohms termination)

Additional
Copper
Connectivity

Chrominance Signal: (C): 0.29 Vp-p (with 75 Ohms termination)

Wire Type Standard UTP: Category 5, 5e or 6 #24 AWG 4-pair
Insulation Resistance: Minimum of 50 megaohms
Meet IEC Specifications: 933-5
Signal Strength: 1 Vp-p (with 75 Ohms termination)

Product Number

RCA Color

Outlet Color

Material ID

M81-SVHS-110-003

Black

760005256

M81-SVHS-110-246

Ivory

760005264

M81-SVHS-110-262

White

760005272

M81-SVHS-110-270

Gray

760005280

M81-RCA-110-003-W

White

Black

760005298

M81-RCA-110-246-W

White

Ivory

760005306

M81-RCA-110-262-W

White

White

760005314

M81-RCA-110-270-W

White

Gray

760005322

M81-RCA-110-003-Y

Yellow

Black

760005330

M81-RCA-110-246-Y

Yellow

Ivory

760005348

M81-RCA-110-262-Y

Yellow

White

760005355

M81-RCA-110-270-Y

Yellow

Gray

760005363

M81-RCA-110-003-R

Red

Black

760005371

M81-RCA-110-246-R

Red

Ivory

760005389

M81-RCA-110-262-R

Red

White

760005397

M81-RCA-110-270-R

Red

Gray

760005405

M81-RCA-110-003-B

Black

Black

760005413

M81-RCA-110-246-B

Black

Ivory

760005421
760005439

M81-RCA-110-262-B

Black

White

M81-RCA-110-270-B

Black

Gray

760005447

M81-RCA-PT

White

760005454

M81-RCA-PT

Yellow

760005462

M81-RCA-PT

Red

760005470

M81-RCA-PT

Black

760005488

74

Category 6 and 5e,

OSP Protector Units
SYSTIMAX Category 6 Protector is designed to give protection for data
circuits entering a building. This solid state device protects sensitive
network equipment from damage caused by transient voltage
surges by diverting them to the ground in 2-5 nanoseconds.
Protection is provided for 4-pair LAN applications with 16V clamping
voltage or 4-pair analog voice applications with a 235V clamping
voltage. Grounding requires a field installed solid copper wire,
10 AWG for Primary and 14 AWG for Isolated Loop. Used with high
performance 4-pair Category 6 Outside Plant Cables as well as Category 6 UTP
cables to create a 100% solid-state protection for fast and reliable response to surge events. It meets the electrical
specifications of TIA/EIA 568B.2-1 for Category 6 channel performance.
Product Number

Clamping Voltage

Applications

Material ID

Cat 6 235V

235 Volt

Analog Voice

760031708

Cat 6 16V

16 Volt

Data

760028373

Cat 6 16V w/POE

16 Volt

POE

760033951

Cat 5e 16V

16 Volt

Data

108224874

Additional
Copper
Connectivity

75

Multipair Protector
Panel 190 Type
The 190 Type Multipair Protector Panel provides indoor station protection for
exposed lines, where the cross-connect field is separated from the protector panels,
at building entrance terminals. The protector panel consists of a metal housing
containing mountings for 3B-, 3C-, 4B-, or 4C-Series Protector Units (sold separately).
It also includes a 25 ft (7.62 m), 26 AWG stub cable that serves as a fusible link, a
24 AWG terminating cable and two connectors for external ground connections.
The internal wiring design prevents protector bypass. A cable pass-through feature allows for side-by-side and top-to-bottom installation.

Physical Specifications:
Height: 50-pair: 13 in (33.0 cm)
100-pair: 24 in (61.0 cm)
Width: 4 in (10.2 cm)
Depth: 2.75 in (6.99 cm)

Additional
Copper
Connectivity

Product Number

Pair Count

Material ID

190A1-50

50

102995073

190A1-100

100

102995099

Station Protector
(110ANA Type) with 110 IDC
for Both Input and Output
The 110ANA1 Multipair Protector Panel provides indoor station protection for small pair
count applications using the 3B-, 3C-, 4B-, or 4C-Series Protector Units. The unique
internal wiring design prevents protector bypass. Designed with 110-Type connecting
blocks for input and output terminations, the 110ANA1 Multipair Protector Panel
provides a modular, space efficient package with quiet front and simplified installation
directly on the wall.
The individual protector modules should be ordered separately.
The 110ANA1 multipair protector panel is UL listed.

Product Number Detailed Description

Dimensions

Material ID

110ANA1-06

Station Protector, with 110 terminations, 6

5-pin protectors not included

Pair Count

4.1in (10.4 cm) W x 3.5 in (8.9 cm) H

x 2.6in (6.6 cm) D

105736482

110ANA1-10

Station Protector, with 110 terminations, 10

5-pin protectors not included

3.9 in (9.9 cm) W x 4.5 in (11.4 cm) H 107408551

x 2.6 in (6.6 cm) D

110ANA1-25

Station Protector, with 110 terminations, 25

5-pin protectors not included

3.9 in (9.9 cm) W x 10 in (25.4 cm) H

x 2.6 in (6.6 cm) D

76

105736490

Building Entrance
Terminal (195 Type)
The unit is equipped with a metal housing containing a 100-pair protector panel
that accepts a wide range of interchangeable plug-in protector units. The input
is either a 100 ft (30.48 m), a 25 ft (7.62 m) or 50 ft (15.24 m) long 26-gauge stub
cable that serves as a fusible link. The output is a 1 ft (0.30 m) 24-gauge cable
with either male or female RJ21 type connectors. The internal wiring design separates the input wires from the output wires, so in the event of a power cross and
the input wire fuses open, they will not be connected to the output wires causing
a bypass.
The 195A type has a wall mount bracket that acts as both a mounting bracket
and a cable guide. The 195B type is a frame mounting version.

Features and Benefits:

Very high density design saves space
The protector panel terminals are gold plated for superior electrical
connections
Accepts a wide range of interchangeable plug-in protector units
Two built-in 3 wire ground connectors facilitate termination of a No. 6 ground wire and
strapping adjacent units together provides common positive grounding
The units are available both male and female output RJ21 connectors
The input stub cables are 25 ft (7.62 m) or 50 ft (15.24 m) long
Product Number

Pair Count

Input

Output

Material ID

195A1-100-25

100

25 ft Stub Cable

1 ft Cable with Female RJ21 Connector

105404776

195A1-100-025M

100

25 ft Stub Cable

1 ft Cable with Male RJ21 Connector

105564025

195A1-100-050

100

50 ft Stub Cable

1 ft Cable with Female RJ21 Connector

105564033

195A1-100-050M

100

50 ft Stub Cable

1 ft Cable with Male RJ21 Connector

105564041

195B1-100-25

100

25 ft Stub Cable

1 ft Cable with Female RJ21 Connector

105501050

195B1-100-025M

100

25 ft Stub Cable

1 ft Cable with Male RJ21 Connector

105564058

195B1-100-050

100

50 ft Stub Cable

1 ft Cable with Female RJ21 Connector

105564066

195B1-100-050M

100

50 ft Stub Cable

1 ft Cable with Male RJ21 Connector

105564074

195B1-100-100

100

100 ft Stub Cable

1 ft Cable with Female RJ21 Connector

105564082

195B1-100-100M

100

100 ft Stub Cable

1 ft Cable with Male RJ21 Connector

105564090

77

Additional
Copper
Connectivity

Building Entrance
Terminal (489A Type)
Reliable electrical protection is essential for securing sensitive
equipment at the building entrance terminal. The lightweight and
high density 489A protector provides this protection. Designed for
use wherever exposed outside plant (OSP) cables enter the building,
the unit provides electrical protection between the cable and
sensitive devices.

Features and Benefits:

The 489 units are lightweight (30 percent lighter than
comparable models) with an attractive appearance
High density design saves wall space (all units, even 200-pair, are only 12 in high
by 14 in wide)
Reliable 110-type IDC output connector for fast, easy connections
The protector panel terminals are gold plated for superior electrical connections
Accepts a wide range of interchangeable plug-in protector units
Hinged, lockable covers provide additional mechanical protection and security
An optional security kit (108314360) allows a padlock to be mounted on the cover
A generous splice chamber with removable grommets allows easy OSP cable entry and splicing
The splice chamber walls are insulated for better fuse coordination
A velcro strap is used for wire management
The 489 units are stacked to minimize wall space and simplify installation
Two built-in 3-wire ground connectors facilitate termination of a number 6 ground wire, and strapping adjacent units
together provides common positive grounding
Additional side exits and common wire guides facilitate dressing and tracing of customer wire
The units are available in 25, 50 and 100
Dimensions are 12 in (30.5 cm) high by 14 in (35.5 cm) wide by 5.5 (14 cm) in thick except for 200-pair units which are
12 in (30.5 cm) high by 14 in (35.5 cm) wide by 8.5 in (21.5 cm) thick
Additional
Copper
Connectivity

Product Number

Pair Count

Input

Material ID

489ACA1-025

25

110 IDC

107894909

489ACA1-050

50

110 IDC

107894917

489ACA1-100

100

110 IDC

107894925

489ACC1-025

25

25 ft Stub Cable

107894941

489ACC1-050

50

25 ft Stub Cable

107894958

489ACC1-100

100

25 ft Stub Cable

107894966

78

Building Entrance
Protectors
Building Entrance Protectors protects sensitive equipment and
personnel from power surges, AC coupling, AC power cross
and lightning strikes. Power surge can travel through buried
or exposed OSP cable back to equipment within the premise.
Plug in protectors (PIPs) in building entrance protectors (BEPs)
act like a circuit breaker.
The 5-pin plug in protection units provide overvoltage
protection with either a gas discharge tube or a solid state
module.

Gas Discharge Tube

Handles larger surges

Possess a higher holding current
Used when high surge currents are common
Used in extreme environments
DSL friendly
Used in low pair count applications

Solid State Module

Tight breakdown voltage which provides a higher level of protection
Longer life threshold (if surges are lower than rating)
Fast response
Product Number PIP Type

Breakdown Over Current @ 25c

Circuit Application Color

Material ID

3B1EW

GDT

265 465 V

N/A

Standard

Black

104410147

4B1EW

GDT w/ HC

265 465 V

<210 sec @ 0.54 A >3 hrs @ 0.35 A

Standard

Black

104401865

3C1S

BSS

220 300 V

N/A

Standard

Black

105514756

4C1S

BSS w/ HC

220 300 V

<210 sec @ 0.54 A >3 hrs @ 0.35 A

Standard

Black

104386545

4C3S-75

BSS w/ HC

60 90 V

<210 sec @ 0.54 A >3 hrs @ 0.35 A

Data Circuits

Red

105581086

Note: GDT gas discharge tube

HC heat coils
BSS balanced solid state

79

Additional
Copper
Connectivity

Additional
Copper
Connectivity

80

Fiber Solutions
Reference Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Cable and Fiber Color Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Cable Sizing and Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Cable Constructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Cable Order Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Patch Cord Order Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
LazrSPEED Cables and Cords 50 micron Laser Optimized Multimode . . . . 91
Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Indoor/Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
TeraSPEED Cables and Cords Zero Water Peak Singlemode . . . . . . . . . . . . .117
Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Indoor/Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
OptiSPEED Cables and Cords 62.5 micron Multimode . . . . . . . . . . . . . . . . . . .133
Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Indoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
Indoor/Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
Cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Composite Fiber Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Outdoor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
Indoor/Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
InstaPATCH Plus System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
G2 Fiber Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Modular Shelves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
Panel Shelves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
Additional Fiber Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193
Fiber Connectors and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
LC Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
SC Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
ST Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
Fiber Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205
Fiber Tools and Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

81

Fiber
Reference

Fiber Optic Solutions Reference

Fiber Optic Cable
Cable and Fiber Color Identification
Standard Jacket Color (according to fiber type):
Fiber
Reference

Indoor: 50 micron (LazrSPEED)

Outdoor and Indoor/Outdoor: All fiber types are BK for Black

AQ for Aqua

62.5 micron (OptiSPEED)

OR for Orange or SL for Slate

Singlemode (TeraSPEED)

YL for Yellow

Standard Color Coding:

1 - Blue

5 - Slate

9 - Yellow

2 - Orange

6 - White

10 - Violet

3 - Green

7 - Red

11 - Rose

4 - Brown

8 - Black

12 - Aqua

For indoor and indoor/outdoor, fibers are identified with standard color code.
For 18 and 24 fiber single unit cables, fibers 13 through 24 repeat the sequence with tracer stripe (i.e. fiber 13 is blue with tracer stripe).
For central tube cables, fiber bundles and fibers are identified with standard color code.
For stranded loose tube cables, buffer tubes and fibers are identified with standard color code.

Cable Sizing and Specification

When sizing and selecting cable the following rules of thumb are useful. Please note, they are only guidelines. Since each site has
its own unique characteristics, a detailed data collection and design process is required.
A growth factor of between 50% and 100% is often applied after sizing current needs
Factors affecting backbone cable sizing include:
- Campus layout
- Campus size (number of buildings)
- Level of automation (amount of computer connectivity)
- Amount of point-to-point traffic vs. LAN traffic
- Level of redundancy
Cable type selection is based on environment and cost
Use a mixture of singlemode and multimode fiber optic cables (recommended 30:70 split minimum respectively)

Install both Multimode and Singlemode

SYSTIMAX SCS recommends deploying multimode and singlemode fiber in the backbone segments of both buildings and
campuses in the industrial and office environment. This combination will most cost-effectively support present day applications
as well as provide future proofing for tomorrows higher speed LANs and broadband video. Of course these recommendations
must be weighed against the application and planning horizons of each customer. The optimal ratio of singlemode to multimode
depends on the predicted need to support applications that exceed the capability of multimode. SYSTIMAX SCS generally
recommends 30% singlemode to those customers forecasting gigabit applications in their future. If such applications are in
the immediate or near future, then consider higher ratios.

Install Enough Fiber

It is important to install enough fiber to support the present and future applications that will simultaneously share the cable
segment. Take into account the type and number of fibers that each application requires and add in spare capacity for future
proofing. Generally, LAN applications each require two fibers, while video applications will require one or two fibers depending
on whether they are unidirectional or bi-directional. (Video links that use bi-directional communications include those that return
video, audio, camera control or data signals.) Add in at least 50% spare capacity and round the fiber-count upward to the next
standard size.

82

Cable Constructions
Indoor Premise Building Cables (Single-Unit 52XX Series)
Outer Jacket
Fiber
Reference

Aramid Yarn
Ripcord
900 m Tight Fiber
250 m Optical Fiber

12-Fiber Subunit
Outer Diameter = 6.0 mm (0.24 in)

Indoor Premise Building Cables (Multi-Unit 53XX Series)

Outer Jacket
Ripcord
Core Wrap Tape
6-Fiber Subunit
Outer Diameter = 5.2 mm (0.20 in)

12-Fiber Subunit
Central Strength Member

83

Outdoor Stranded Loose Tube Cables (Dielectric 5024 Series)

Outer Jacket
Ripcord
Fiber
Reference

Strength Elements
Binder
Water Swellable Tape
3 mm Gel-Filled Buffer Tubes
Binder
Central Strength Member
250 Micron Fibers

Outdoor Stranded Loose Tube Cables (Metallic 5023 Series)

Outer Jacket
Steel Tape Armoring
Strength Elements
Binder
Water Swellable Tape
Ripcord
Binder
3 mm Gel-Filled Buffer Tubes
Dielectric Strength Member
250 Micron Fibers

84

Outdoor Central Tube Cables (Dielectric 5022 Series)

Outer Jacket
Rigid RSM
Fiber
Reference

Flexible Strength Elements

6 mm Gel-Filled Buffer Tubes
Ripcord for Jacket Access
Gel
Fiber Binder Threads
250 Micron Fibers

Outdoor Central Tube Cables (Metallic 5021 Series)

Outer Jacket
Steel Armor
Steel RSM
6 mm Gel-Filled Buffer Tubes
Ripcord for Jacket Access
Gel
Ripcord for Armor Access
250 Micron Fibers

85

Indoor/Outdoor Stranded Loose Tube Cables (Plenum 5125 Series)

Outer Jacket
Ripcord
Fiber
Reference

Strength Elements
Binder
Water Swellable Tape
3 mm Dry-Block Buffer Tubes
Binder
Central Strength Member
250 Micron Fibers

Indoor/Outdoor Stranded Loose Tube Cables (Riser 5124 Series)

Outer Jacket
Ripcord
Strength Elements
Binder
Water Swellable Tape
3 mm Gel-Filled Buffer Tubes
Binder
Central Strength Member
250 Micron Fibers

86

Indoor/Outdoor Tight Buffered Cables (Single Unit 5100, 5101, 5102 Series)
Outer Jacket
Ripcord
Fiber
Reference

Water Blocking System

Aramid Yarn
900 m Tight Fiber
250 m Optical Fiber
Central Strength Member

Indoor/Outdoor Tight Buffered Cables (Multi-Unit 5103, 5104, 5105 Series)

Outer Jacket

12-Fiber Subunit
Outer Diameter = 7.2 mm (0.28 in)

Ripcord
Water Blocking Tape
12-Fiber Subunit
Water Blocking Tape
Central Strength Member

6-Fiber Subunit
Outer Diameter = 5.5 mm (0.22 in)

87

Cable Order Process

Single Unit and Multi-Unit Fiber Optic Cables
Fiber
Reference

SPACE

POSITION 1

5 Fiber
Cable
POSITION 2

What Cable
Family Do
You Need?
0 OSP
1 Indoor/
Outdoor
2 Premise
Cable
(Single
Unit 2-12
Fibers)
2 Premise
Cable
(Single
Unit 18-24
Fibers)
3 Premise
Cable
(MultiUnit 18+
Fibers)

POSITION 8

Premises Cables
52XX and 53XX

20 Central Core,
Dielectric
21 Central Core, Metallic
22 Central Core,
Dielectric
23 Loose Tube, Stranded,
Metallic
24 Loose Tube, Stranded,
Dielectric
26 Loose Tube, Stranded,
Figure 8, Metallic

POSITIONS 11 & 12

What Type of
Fiber Do You
Need?*

What Color Will

the Cable Jacket
Be?

Fiber Type

AQ Aqua
(LazrSPEED)

POSITIONS 5, 6 & 7

W TeraSPEED
ZWP-SM

How Many Fibers Do You

Need?*

M OptiSPEED
62.5 m

OSP - Central Core 4-96

H LazrSPEED
150

00 Riser (OFNR) Rated

Outside Plant Cables

50XX

A Q
POSITIONS 13 16
ARE OPTIONAL

POSITION 9

Cable version
manufacturing
information
only

What Cable Construction Do You Need?

02 Low Smoke (LSZH)

Rated

SPACE

POSITIONS 3 & 4

01 Plenum (OFNP) Rated

OSP - Loose Tube 4-288

I/O Tight Buffered 4, 12,
24, 36,
48
I/O Loose Tube

6-288

Premise Cable

2-72

Cordage

1-2

* Composites require
additional information as
indicated in the composite
key.

YL Yellow
(Singlemode)
OR Orange
(Multimode)
SL Slate
(Multimode)

Z LazrSPEED
300

BK Black
(OSP & I/O)

X LazrSPEED
550
* Composites
require
additional
information as
indicated in
the composite
key.

POSITION 10

What Environmental
Rating Do You
Need?
P Plenum (OFNP)
R Riser (OFNR)
H Low Smoke Zero
Halogen (LSZH)

34 Loose Tube, Stranded,

Dielectric, 6 Fiber
Tubes

X Not Rated (OSP)

Indoor/Outdoor Cables
51XX
00 Tight Buffered Riser
(OFNR) <=12 fibers
01 Tight Buffered
Plenum (OFNP) <=12
fibers
02 Tight Buffered LSOH
<=12 fibers
03 Tight Buffered Riser
(OFNR) >12 fibers
04 Tight Buffered
Plenum (OFNP) >12
fibers
05 Tight Buffered LSZH
>12 fibers

Optional Armoring for Single Fiber and Composite Fiber Premise Cables
POSITION 13

POSITION 14

Type of Armor

Environmental
Rating

Steel

AL Aluminum

24 Loose Tube, Stranded,

Riser, Dielectric
25 Loose Tube, Stranded,
Plenum, Dielectric

Riser

Plenum

LSZH

POSITIONS 15 & 16

Armored jacket color

will match the base
cable jacket color
AQ Aqua (LazrSPEED)
YL Yellow (Singlemode)
OR Orange (Multimode)
SL Slate (Multimode)

88

Composite Cables

5 2 0 1

1 2 / 2 4 A
SPACE

SEPARATOR

POSITION 1

POSITIONS 5 & 6

5 Fiber
Cable

How Many
Singlemode Fibers
Do You Need?

POSITION 2

What Cable
Family Do
You Need?

Outside Plant

6-48

Premises

2-36

I/O Loose Tube 6-48

0 OSP
1 Indoor/
Outdoor
2 Premise
Cable
(Single
Unit 2-12
Fibers)
2 Premise
Cable
(Single
Unit 18 &
24 Fibers)
3 Premise
Cable
(MultiUnit 18+
Fibers)

POSITIONS 3 & 4

What Cable
Construction
Do You Need?

S / M P A Q
SPACE

POSITION 11

POSITION 13

POSITIONS 15 & 16

What Type of
Singlemode
Fiber Do You
Need?

What Type of
Multimode
Fiber Do You
Need?

What Color Will

the Cable Jacket
Be?

POSITIONS 8 & 9

How Many
Multimode
Fibers Do You
Need?

POSITIONS 17 20
ARE OPTIONAL

SEPARATOR

Outside Plant

6-48

Fiber Type

Fiber Type

AQ Aqua
(LazrSPEED)

Premises

2-36

W TeraSPEED
ZWP-SM

M OptiSPEED
62.5 m

SL Slate
(Multimode)

H LazrSPEED
150

BK Black
(OSP & I/O)

I/O Loose Tube 6-48

POSITION 10

Z LazrSPEED
300

Cable version
manufacturing
information only

X LazrSPEED
550

Premises Cables
52XX and 53XX

POSITION 14

00 Riser (OFNR)
Rated

What
Environmental
Rating Do You
Need?

01 Plenum
(OFNP) Rated
02 Low Smoke
(LSZH) Rated

P Plenum (OFNP)
R Riser (OFNR)

Indoor/Outdoor
Cables 51XX

H Low Smoke
Zero Halogen
(LSZH)

24 Loose Tube,
Stranded,
Riser,
Dielectric

X Not Rated (OSP)

25 Loose Tube,
Stranded,
Plenum,
Dielectric
Outside Plant
Cables 50XX
21 Central Core,
Metallic
22 Central Core,
Dielectric

Optional Armoring for Single Fiber and Composite Fiber Premise Cables

24 Loose Tube,
Stranded,
Dielectric

POSITION 17

POSITION 18

Type of Armor

Environmental
Rating

Steel

AL Aluminum

Riser

Plenum

LSZH

POSITIONS 19 & 20

Armored jacket color

will match the base
cable jacket color
AQ Aqua (LazrSPEED)
YL Yellow (Singlemode)
OR Orange (Multimode)
SL Slate (Multimode)

89

Fiber
Reference

Fiber Patch Cord Product Identifier

Simplex and Duplex Fiber Patch Cords
Cord Order Process
Fiber
Reference

The Fiber Patch Cord Product Identifier provides for a flexible ordering system. The various patch cords are orderable with a
16-character feature configuration coding system. It allows for many different combinations of plug ends, cordage types, colors
and lengths. However, as this product guide is global, regional portfolios differ. To confirm your region's offering, please contact
your account representative or BusinessPartner.

FPC

Fiber
Patch Cord

bb

cc

e -

hhh

Connector One

Cordage Size

Jacket Type

Length

LC LC Type
Connector(s)

0 0.9 mm (Tight
Buffered Fiber)

R Riser Rated (Std

Color)

001-XXX

SC SC Type
Connector(s)

1 0.9 mm (SBJ cordage)

A Riser Rated - Orange

EP STII+ Type
Connector(s)

2 1.6 mm

P Plenum (Std Color)

3 3.0 mm

H Low Smoke Zero

Halogen

ST STII Type
Connector(s)
LA LC Angled Type
Connector(s)

Number of Ends

Unit of Measure

SA SC Angled Type
Connector(s)

1 Simplex

F Feet

2 Duplex

M Meter

Fiber Type

Connector Two

M OptiSPEED
Multimode

LC LC Type Connector(s)

X LazrSPEED 550
Multimode

EP STII+ Type Connector(s)

W TeraSPEED
Singlemode

SC SC Type Connector(s)
ST STII Type Connector(s)
MJ MTRJ Type Connector
UC Unconnectorized
SA SC Angled Type Connector(s)
LA LC Angled Type Connector(s)

Example:
The FPC Code for LazrSPEED LC to LC Duplex Plenum 7-foot Patch Cord is: FPCXLCLC22-PF007

90

LazrSPEED Solution
Laser Optimized Multimode
1 Fiber optic LIU/489 FIU
2 Racks and cabinets

3 Equipment room:
-600 G2 modular shelf and panel shelf
-1000 G2 modular shelf and panel shelf
4 Telecom closet:
-600 G2 modular shelf and panel shelf
-1000 G2 modular shelf and panel shelf

5 Faceplate/multimedia information outlet

LazrSPEED outside plant cable

LazrSPEED

LazrSPEED indoor/outdoor cable

LazrSPEED indoor cable
LazrSPEED patch cord
1

LazrSPEED riser cable

2
3

LazrSPEED Solution

LazrSPEED fiber is the perfect choice for new installations because it has been designed to support 10 Gbps up to 550 meter
distances. This fully supports the vast majority of in-building distance requirements. LazrSPEED Solution is flexible and supports all
the current LANs from 10 Mbps to 1 Gbps. Gigabit ethernet is supported up to over 1 kilometer for 1000BASE-SX. A future upgrade
to 10 Gbps can be easily accomplished by simply plugging in short wavelength (850 nm) 10 Gbps electronics in to the existing
LazrSPEED channels up to 550 meters depending on LazrSPEED fiber type. LazrSPEED Solution also enables dual speed 1 Gbps/10
Gbps ports, which allow less disruptive incremental upgrades of switches and servers. LazrSPEED Solution supports very high speed
data transmission by controlling differential mode delay (DMD) that results when light rays travelling along the various pathways
(modes) arrive at the detector at different times. DMD can cause an optical signal to be detected as several different signals.
With the lowest multimode optical channel loss available and the breakthrough bandwidth performance, a LazrSPEED LC solution
easily meets the gigabit ethernet standard and sets the pace for 10 Gbps support. This channel loss performance (0.17dB average
loss for LC connections, 3.0 dB/km loss for cables at 850 nm) and bandwidth performance enables cost-effective 10 Gbps networks as well as increased network reliability for gigabit applications. It is available in three versions:

LazrSPEED 550

Meets and exceeds the next generation multimode fiber (OM3) specifications in standards
Over 4,700 MHz-km laser bandwidth at 850 nm
Designed to support low complexity 10 Gbps serial transmission to 550 meters
Supports all serial and CWDM options for 10 Gbps ethernet
Support 1 Gbps ethernet up to 1.1 km
Laser optimized
Suitable for LANs from 10 Mbps to 10 Gbps

LazrSPEED 300

Meets and exceeds the next generation multimode fiber (OM3) specifications in standards
Over 2,000 MHz-km laser bandwidth at 850 nm
Designed to support low complexity 10 Gbps serial transmission to 300 meters
Supports all serial and CWDM options for 10 Gbps ethernet
Support 1 Gbps ethernet up to 1 km
Laser optimized
Suitable for LANs from 10 Mbps to 10 Gbps

91

LazrSPEED 150

LazrSPEED

Meets and exceeds the multimode fiber (OM2) specifications in standards

Over 950 MHz-km laser bandwidth at 850 nm
Designed to support low complexity 10 Gbps serial transmission to 150 meters
Supports all serial and CWDM options for 10 Gbps ethernet
Supports 1 Gbps ethernet up to 800 meters
Laser optimized
Suitable for LANs from 10 Mbps to 10 Gbps

LazrSPEED products include:

Building Cable
Indoor/Outdoor Cable
Outside Plant Cable (where appropriate for the enterprise market)
LC Connectors (SC or ST II+ Connectors available for limited applications and connections)
Splice and Termination Shelves
Multimedia Outlets and Boxes
Connectorized Patch Cords

92

LazrSPEED Specifications
LazrSPEED 550/300/150
Laser Optimized 50 Micron Multimode Fiber

Physical Characteristics

Mechanical Characteristics

Core Diameter

50.0 2.5 m

Proof Test

100 kpsi (0.69 Gpa)

Cladding Diameter

125.0 1.0 m

Coating Strip Force

0.3 - 2.0 lbf (1.3 - 8.9 N)

Core/Clad Offset

1.5 m

Dynamic Fatigue Parameter (nd)

18

Coating Diameter (Uncolored)

245 10 m

Coating Diameter (Colored)

254 7 m

Macrobending, max. (100 turns @

75 mm mandrel)

0.50 dB max. @ 850 nm

and 1300 nm

Coating/Cladding Concentricity Error, max. 6 m

Clad Non-Circularity

1%

Optical Characteristics, Wavelength Specific

Max. Attenuation, Loose Tube Cable

850 nm

1300 nm

3.0 dB/km

1.0 dB/km

Max. Attenuation, Tight Buffer Cable

3.0 dB/km

1.0 dB/km

Bandwidth, OFL

550: 3,500 MHz-km

500 MHz-km

300: 1,500 MHz-km

500 MHz-km

150: 700 MHz-km

500 MHz-km

550: 4,700 MHz-km

500 MHz-km

300: 2,000 MHz-km

500 MHz-km

150: 950 MHz-km

500 MHz-km

550: Exceeds TIA-492AAAC-A (IEC-60793-2-10ed2)

0.88 ps/m

Bandwidth, Laser

Differential Mode Delay

1 Gbps Ethernet Distance

300: Exceeds TIA-492AAAC-A (IEC-60793-2-10ed2)

0.88 ps/m

150: 0.70 ps/m

0.88 ps/m

550: 1,100 m

600 m

300: 1,000 m

600 m

150: 800 m

600 m

550: 550 m

10 Gbps Ethernet Distance

300: 300 m
150: 150 m

Optical Characteristics, General

Environmental Characteristics

Numerical Aperature

0.200 0.015

Temperature Dependence -76F to 185F (-60C to 85C)

0.10 dB

Point Defects, Max.

0.15 dB

0.10 dB

Zero Dispersion Wavelength

1297-1316 nm

Temperature Humidity Cycling 14F to 185F (-10C to 85C)

up to 95% RH

Zero Dispersion Slope

0.105 ps/[km-nm-nm]

Water Immersion, 73.4F (23C)

0.20 dB

Heat Aging, 185F (85C)

0.20 dB

93

LazrSPEED

LazrSPEED Multimode
Building Cables
The LazrSPEED Building Cables consist of laser-optimized 50/125 m
optical fibers. All LazrSPEED fibers are Differential Mode Delay (DMD)
tested. The SYSTIMAX Labs use a high-resolution DMD test bench that
exceeds the FOTP-220 standards and is independently certified by UL.

LazrSPEED

The LazrSPEED building cable is constructed with tight buffer fibers, aramid strength
yarn, and is available in PVC, Plenum and Low Smoke Zero Halogen outer jacket. These cables are designed for point-to-point
applications as well as mid-span access, and provide a high-level of protection for fiber installed in the building environment.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Operating Temperature: -4F to 158F (-20C to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0C to 70C)
Storage Temperature: -40F to 158F (-40C to 70C)
Crush Resistance: 57.3 lbf/in (10 N/mm) (Test Method: FOTP 41)
Impact Resistance: 4.34 lbf-ft (5.8 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 100 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 50 micron

Fibers are identified with standard color coding.

LS 550 Plenum
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5201 006A XPAQ

Single Unit

0.19 in (4.8 mm)

15.1 lbs/kft (22 kg/km)

760012138

5201 012A XPAQ

12

Single Unit

0.23 in (5.8 mm)

20.8 lbs/kft (31 kg/km)

760006411

5201 024A XPAQ

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

760018697

5301 024A XPAQ

24

Multi-unit

0.52 in (13.1 mm)

108.1 lbs/kft (161 kg/km)

760012146

5301 036A XPAQ

36

Multi-unit

0.54 in (13.7 mm)

128.4 lbs/kft (191 kg/km)

760024547

5301 048A XPAQ

48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

760024554

5301 072A XPAQ

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760024562

5301 096A XPAQ

96

Multi-unit

0.90 in (23.0 mm)

360.8 lbs/kft (537 kg/km)

760021691

5301 144A XPAQ

144

Multi-unit

0.95 in (24.1 mm)

330.8 lbs/kft (492 kg/km)

760024869

LS 300 Plenum
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5201 002A ZPAQ

Single Unit

0.15 in (3.9 mm)

8.8 lbs/kft (13.1 kg/km)

700009855

5201 004A ZPAQ

Single Unit

0.17 in (4.4 mm)

12.2 lbs/kft (18 kg/km)

700009814

5201 006A ZPAQ

Single Unit

0.19 in (4.8 mm)

15.1 lbs/kft (22 kg/km)

700009772

5201 008A ZPAQ

Single Unit

0.20 in ( 5.1 mm)

16.8 lbs/kft (25 kg/km)

760008508

5201 012A ZPAQ

12

Single Unit

0.23 in (5.8 mm)

20.8 lbs/kft (31 kg/km)

700009731

5201 024A ZPAQ

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

760018689

5301 024A ZPAQ

24

Multi-unit

0.52 in (13.1 mm)

108.1 lbs/kft (161 kg/km)

700009699

5301 036A ZPAQ

36

Multi-unit

0.54 in (13.7 mm)

128.4 lbs/kft (191 kg/km)

700009673

5301 048A ZPAQ

48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

700211147

5301 072A ZPAQ

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

700211154

5301 096A ZPAQ

96

Multi-unit

0.90 in (23.0 mm)

360.8 lbs/kft (537 kg/km)

760010132

5301 144A ZPAQ

144

Multi-unit

0.95 in (24.1 mm)

330.8 lbs/kft (492 kg/km)

760018879

94

LS 150 Plenum
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5201 002A HPAQ

Single Unit

0.15 in (3.9 mm)

8.8 lbs/kft (13.1 kg/km)

700009871

5201 004A HPAQ

Single Unit

0.17 in (4.4 mm)

12.2 lbs/kft (18 kg/km)

700009830

5201 006A HPAQ

Single Unit

0.19 in (4.8 mm)

15.1 lbs/kft (22 kg/km)

700009798

5201 006A HPRD

Single Unit

0.19 in (4.8 mm)

15.1 lbs/kft (22 kg/km)

760036186

5201 008A HPAQ

Single Unit

0.20 in (5.1 mm)

16.8 lbs/kft (25 kg/km)

760008698

5201 012A HPAQ

12

Single Unit

0.23 in (5.8 mm)

20.8 lbs/kft (31 kg/km)

700009756

5201 024A HPAQ

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

760018671

5301 024A HPAQ

24

Multi-unit

0.52 in (13.1 mm)

108.1 lbs/kft (161 kg/km)

700009715

5301 036A HPAQ

36

Multi-unit

0.54 in (13.7 mm)

128.4 lbs/kft (191 kg/km)

700205586

5301 048A HPAQ

48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

700211105

5301 072A HPAQ

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

700211113

5301 096A HPAQ

96

Multi-unit

0.90 in (23.0 mm)

360.8 lbs/kft (537 kg/km)

760019620

5301 144A HPAQ

144

Multi-unit

0.95 in (24.1 mm)

330.8 lbs/kft (492 kg/km)

760024836

LS 550 Riser
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5200 002A XRAQ

Single Unit

0.16 in (4.1 mm)

8.6 lbs/kft (12.9 kg/km)

760028753

5200 006A XRAQ

Single Unit

0.20 in (5.1 mm)

15.2 lbs/kft (23 kg/km)

760012104

5200 012A XRAQ

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

760012112

5200 024A XRAQ

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

760018564

5300 024A XRAQ

24

Multi-unit

0.56 in (14.1 mm)

106.7 lbs/kft (159 kg/km)

760012120

5300 036A XRAQ

36

Multi-unit

0.58 in (14.6 mm)

112.4 lbs/kft (167 kg/km)

760026831

5300 048A XRAQ

48

Multi-unit

0.63 in (16.1 mm)

142.8 lbs/kft (212 kg/km)

760026849

5300 072A XRAQ

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

760026856

5300 096A XRAQ

96

Multi-unit

0.93 in (23.7 mm)

337.2 lbs/kft (502 kg/km)

760026864

5300 144A XRAQ

144

Multi-unit

1.03 in (26.1 mm)

350.5 lbs/kft (522 kg/km)

760026872

LS 300 Riser
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5200 002A ZRAQ

Single Unit

0.16 in (4.1 mm)

10.6 lbs/kft (15.8 kg/km)

700208127

5200 004A ZRAQ

Single Unit

0.19 in (4.8 mm)

15 lbs/kft (22.3 kg/km)

700208135

5200 006A ZRAQ

Single Unit

0.20 in (5.1 mm)

16 lbs/kft (23.8 kg/km)

700208143

5200 008A ZRAQ

Single Unit

0.22 in (5.5 mm)

17 lbs/kft (26 kg/km)

760008516

5200 012A ZRAQ

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

700208150

5200 024A ZRAQ

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

760018556

5300 024A ZRAQ

24

Multi-unit

0.56 in (14.1 mm)

106.7 lbs/kft (159 kg/km)

700208168

5300 036A ZRAQ

36

Multi-unit

0.58 in (14.6 mm)

112.4 lbs/kft (167 kg/km)

700208176

5300 048A ZRAQ

48

Multi-unit

0.63 in (16.1 mm)

142.8 lbs/kft (212 kg/km)

700208218

5300 072A ZRAQ

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

700208226

5300 144A ZRAQ

144

Multi-unit

1.03 in (26.1 mm)

350.5 lbs/kft (522 kg/km)

760018861

95

LazrSPEED

LS 150 Riser

LazrSPEED

Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5200 002A HRAQ

Single Unit

0.16 in (4.1 mm)

8.6 lbs/kft (12.9 kg/km)

700203052

5200 004A HRAQ

Single Unit

0.19 in (4.8 mm)

13.1 lbs/kft (19 kg/km)

700203060

5200 006A HRAQ

Single Unit

0.20 in (5.1 mm)

15.2 lbs/kft (23 kg/km)

700203078

5200 008A HRAQ

Single Unit

0.22 in (5.5 mm)

17.2 lbs/kft (26 kg/km)

760008706

5200 012A HRAQ

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

700203086

5200 024A HRAQ

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

760018549

5300 024A HRAQ

24

Multi-unit

0.56 in (141 mm)

106.7 lbs/kft (159 kg/km)

700203094

5300 036A HRAQ

36

Multi-unit

0.58 in (14.6 mm)

112.4 lbs/kft (167 kg/km)

700203102

5300 048A HRAQ

48

Multi-unit

0.63 in (16.1 mm)

142.8 lbs/kft (212 kg/km)

700203110

5300 072A HRAQ

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

700203128

5300 096A HRAQ

96

Multi-unit

0.93 in (23.7 mm)

337.2 lbs/kft (502 kg/km)

760026310

5300 144A HRAQ

144

Multi-unit

1.03 in (26.1 mm)

350.5 lbs/kft (522 kg/km)

760024810

LS 550 LSZH
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5202 006A XHAQ

Single Unit

0.20 in (5.2 mm)

16.4 lbs/kft (24 kg/km)

760012153

5202 012A XHAQ

12

Single Unit

0.24 in (6.1 mm)

23.0 lbs/kft (34 kg/km)

760012161

5302 024A XHAQ

24

Multi-unit

0.56 in (14.2 mm)

116.6 lbs/kft (174 kg/km)

760012179

LS 300 LSZH
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5202 002A ZHAQ

Single Unit

0.15 in (3.9 mm)

7.82 lbs/kft (11.6 kg/km)

700009863

5202 004A ZHAQ

Single Unit

0.19 in (4.8 mm)

14.3 lbs/kft (21 kg/km)

700009822

5202 006A ZHAQ

Single Unit

0.20 in (5.2 mm)

16.4 lbs/kft (24 kg/km)

700009780

5202 008A ZHAQ

Single Unit

0.22 in (5.5 mm)

19.1 lbs/kft (28 kg/km)

760026336

5202 012A ZHAQ

12

Single Unit

0.24 in (6.1 mm)

23.0 lbs/kft (34 kg/km)

700009749

5302 024A ZHAQ

24

Multi-unit

0.56 in (14.2 mm)

116.6 lbs/kft (174 kg/km)

700009707

5302 036A ZHAQ

36

Multi-unit

0.59 in (14.9 mm)

118.5 lbs/kft (176 kg/km)

700009681

5302 048A ZHAQ

48

Multi-unit

0.65 in (16.4 mm)

150.3 lbs/kft (224 kg/km)

700211121

5302 072A ZHAQ

72

Multi-unit

0.79 in (20.2 mm)

242.2 lbs/kft (360 kg/km)

700211139

LS 150 LSZH
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5202 002A HHAQ

Single Unit

0.15 in (3.9 mm)

7.82 lbs/kft (11.6 kg/km)

700009889

5202 004A HHAQ

Single Unit

0.19 in (4.8 mm)

14.3 lbs/kft (21 kg/km)

700009848

5202 006A HHAQ

Single Unit

0.20 in (5.2 mm)

16.4 lbs/kft (24 kg/km)

700009806

5202 012A HHAQ

12

Single Unit

0.24 in (6.1 mm)

23.0 lbs/kft (34 kg/km)

700009764

5302 024A HHAQ

24

Multi-unit

0.56 in (14.2 mm)

116.6 lbs/kft (174 kg/km)

700009723

5302 036A HHAQ

36

Multi-unit

0.59 in (14.9 mm)

118.5 lbs/kft (176 kg/km)

700229511

5302 048A HHAQ

48

Multi-unit

0.65 in (16.4 mm)

150.3 lbs/kft (224 kg/km)

700211089

5302 072A HHAQ

72

Multi-unit

0.79 in (20.2 mm)

242.2 lbs/kft (360 kg/km)

700211097

96

LazrSPEED Multimode
Armored Cables
SYSTIMAX Interlocking Armored Fiber Optic Cable provides
superior protection and space savings. It provides installation
protection from bending and excessive pull tension, significant
time and labor reductions versus conduit or interduct
installations and increased installation and design flexibility.
SYSTIMAX Interlocking Armor can be used anywhere
additional protection and security for the fiber cable is desired.
Applications include building backbone, zone distribution, raised floor, data centers and storage area
networks (SANs). Vertical markets include: industrial, manufacturing, airports, stadiums, military and any other vertical where
increased protection and security for the fiber cable is desired. These include: financial, hospitals, educational facilities and many
more.
The SYSTIMAX Interlocking Armor is applied spirally around any premise distribution cable, and is available in either steel or
aluminum. The armored cable is then over-jacketed with a sheath. This sheath is color-coded to the fiber type contained within,
and provides not only the ability to print the armor with all relevant information on the cable inside, but also allows for easier
handling and pulling.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Operating Temperature: -4F to 158F (-20C to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0C to 70C)
Storage Temperature: -40F to 158F (-40C to 70C)
Crush Resistance: 486.8 lbf/in (85 N/mm) (Test Method: FOTP 41)
Impact Resistance: 25.8 lbf-ft (35 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 50 micron

Fibers are identified with standard color coding.

LS 550 Steel Armored Plenum

Product Number

Fiber Count Construction Type Outside Diameter

Weight

5201 006A XPAQ SPAQ

Single Unit

0.56 in (14.1 mm)

163 lbs/kft (243 kg/km)

760012138-SPAQ

5201 012A XPAQ SPAQ

12

Single Unit

0.56 in (14.1 mm)

169 lbs/kft (251 kg/km)

760006411-SPAQ

5301 024A XPAQ SPAQ

24

Multi-unit

0.86 in (21.7 mm)

364 lbs/kft (542 kg/km)

760012146-SPAQ

5301 036A XPAQ SPAQ

36

Multi-unit

0.86 in (21.7 mm)

384 lbs/kft (572 kg/km)

760024547-SPAQ

5301 048A XPAQ SPAQ

48

Multi-unit

0.91 in (23.0 mm)

412 lbs/kft (613 kg/km)

760024554-SPAQ

5301 072A XPAQ SPAQ

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

760024562-SPAQ

5301 144A XPAQ SPAQ

144

Multi-unit

1.26 in (31.9 mm)

700 lbs/kft (1,042 kg/km)

760024869-SPAQ

97

Material ID

LazrSPEED

LS 300 Steel Armored Plenum

LazrSPEED

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5201 002A ZPAQ SPAQ

Sinlge Unit

0.56 in (14.1 mm)

100 lbs/kft (148 kg/km)

700009855-SPAQ

5201 004A ZPAQ SPAQ

Sinlge Unit

0.56 in (14.1 mm)

103 lbs/kft (154 kg/km)

700009814-SPAQ

5201 006A ZPAQ SPAQ

Sinlge Unit

0.56 in (14.1 mm)

106 lbs/kft (158 kg/km)

700009772-SPAQ

5201 008A ZPAQ SPAQ

Sinlge Unit

0.56 in (14.1 mm)

108 lbs/kft (160 kg/km)

760008508-SPAQ

5201 012A ZPAQ SPAQ

12

Sinlge Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

700009731-SPAQ

5201 024A ZPAQ SPAQ

24

Sinlge Unit

0.81 in (20.4 mm)

226 lbs/kft (336 kg/km)

760018689-SPAQ

5301 024A ZPAQ SPAQ

24

Multi-unit

0.81 in (20.4 mm)

226 lbs/kft (336 kg/km)

700009699-SPAQ

5301 036A ZPAQ SPAQ

36

Multi-unit

0.86 in (21.7 mm)

282 lbs/kft (420 kg/km)

700009673-SPAQ

5301 048A ZPAQ SPAQ

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

700211147-SPAQ

5301 072A ZPAQ SPAQ

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

700211154-SPAQ

5301 096A ZPAQ SPAQ

96

Multi-unit

1.26 in (31.9 mm)

569 lbs/kft (847 kg/km)

760010132-SPAQ

5301 144A ZPAQ SPAQ

144

Multi-unit

1.26 in (31.9 mm)

539 lbs/kft (802 kg/km)

760018879-SPAQ

LS 150 Steel Armored Plenum

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5201 002A HPAQ SPAQ

Single Unit

0.56 in (14.1 mm)

157 lbs/kft (233 kg/km)

700009871-SPAQ

5201 004A HPAQ SPAQ

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

700009830-SPAQ

5201 006A HPAQ SPAQ

Single Unit

0.56 in (14.1 mm)

163 lbs/kft (243 kg/km)

700009798-SPAQ

5201 008A HPAQ SPAQ

Single Unit

0.56 in (14.1 mm)

165 lbs/kft (245 kg/km)

760008698-SPAQ

5201 012A HPAQ SPAQ

12

Single Unit

0.56 in (14.1 mm)

169 lbs/kft (251 kg/km)

700009756-SPAQ

5201 024A HPAQ SPAQ

24

Single Unit

0.66 in (16.6 mm)

231 lbs/kft (344 kg/km)

760018671-SPAQ

5301 024A HPAQ SPAQ

24

Multi-unit

0.86 in (27.1 mm)

364 lbs/kft (542 kg/km)

700009715-SPAQ

5301 036A HPAQ SPAQ

36

Multi-unit

0.86 in (27.1 mm)

384 lbs/kft (572 kg/km)

700205586-SPAQ

5301 048A HPAQ SPAQ

48

Multi-unit

0.91 in (23.0 mm)

412 lbs/kft (613 kg/km)

700211105-SPAQ

5301 072A HPAQ SPAQ

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

700211113-SPAQ

5301 096A HPAQ SPAQ

96

Multi-unit

1.26 in (31.9 mm)

730 lbs/kft (1,087 kg/km)

760019620-SPAQ

5301 144A HPAQ SPAQ

144

Multi-unit

1.26 in (31.9 mm)

700 lbs/kft (1,042 kg/km)

760024836-SPAQ

LS 550 Steel Armored Riser

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5200 006A XRAQ SRAQ

156 lbs/kft (232 kg/km)

760012104-SRAQ

Single Unit

0.56 in (14.1 mm)

5200 012A XRAQ SRAQ

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

760012112-SRAQ

5300 024A XRAQ SRAQ

24

Multi-unit

0.91 in (23.0 mm)

368 lbs/kft (548 kg/km)

760012120-SRAQ

5300 036A XRAQ SRAQ

36

Multi-unit

0.91 in (23.0 mm)

374 lbs/kft (557 kg/km)

760026831-SRAQ

5300 048A XRAQ SRAQ

48

Multi-unit

0.96 in (24.3 mm)

400 lbs/kft (595 kg/km)

760026849-SRAQ

5300 072A XRAQ SRAQ

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

760026856-SRAQ

5300 096A XRAQ SRAQ

96

Multi-unit

1.26 in (31.9 mm)

689 lbs/kft (,1026 kg/km)

760026864-SRAQ

5300 144A XRAQ SRAQ

144

Multi-unit

1.36 in (34.4 mm)

734 lbs/kft (1,093 kg/km)

760026872-SRAQ

98

LS 300 Steel Armored Riser

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5200 002A ZRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

149 lbs/kft (222 kg/km)

700208127-SRAQ

5200 004A ZRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

154 lbs/kft (229 kg/km)

700208135-SRAQ

5200 006A ZRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

156 lbs/kft (232 kg/km)

700208143-SRAQ

5200 008A ZRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

760008516-SRAQ

5200 012A ZRAQ SRAQ

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

700208150-SRAQ

5300 024A ZRAQ SRAQ

24

Multi-unit

0.91 in (23.0 mm)

368 lbs/kft (548 kg/km)

700208168-SRAQ

5300 036A ZRAQ SRAQ

36

Multi-unit

0.91 in (23.0 mm)

374 lbs/kft (557 kg/km)

700208176-SRAQ

5300 048A ZRAQ SRAQ

48

Multi-unit

0.96 in (24.3 mm)

400 lbs/kft (595 kg/km)

700208218-SRAQ

5300 072A ZRAQ SRAQ

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

700208226-SRAQ

LS 150 Steel Armored Riser

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5200 002A HRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

149 lbs/kft (222 kg/km)

700203052-SRAQ

5200 004A HRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

154 lbs/kft (229 kg/km)

700203060-SRAQ

5200 006A HRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

156 lbs/kft (232 kg/km)

700203078-SRAQ

5200 008A HRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

760008706-SRAQ

5200 012A HRAQ SRAQ

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

700203086-SRAQ

5200 024A HRAQ SRAQ

24

Single Unit

0.66 in (16.6 mm)

213 lbs/kft (317 kg/km)

760018549-SRAQ

5300 024A HRAQ SRAQ

24

Multi-unit

0.91 in (23.0 mm)

368 lbs/kft (548 kg/km)

700203094-SRAQ

5300 036A HRAQ SRAQ

36

Multi-unit

0.91 in (23.0 mm)

374 lbs/kft (557 kg/km)

700203102-SRAQ

5300 048A HRAQ SRAQ

48

Multi-unit

0.96 in (24.3 mm)

400 lbs/kft (595 kg/km)

700203110-SRAQ

5300 072A HRAQ SRAQ

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

700203128-SRAQ

5300 096A HRAQ SRAQ

96

Multi-unit

1.26 in (31.9 mm)

689 lbs/kft (1,026 kg/km)

760026310-SRAQ

5300 144A HRAQ SRAQ

144

Multi-unit

1.36 in (34.4 mm)

734 lbs/kft (1,093 kg/km)

760024810-SRAQ

99

LazrSPEED

LS 550 Steel Armored LSZH

LazrSPEED

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5202 006A XHAQ SHAQ

160 lbs/kft (238 kg/km)

760012153-SHAQ

Single Unit

0.56 in (14.1 mm)

5202 012A XHAQ SHAQ

12

Single Unit

0.56 in (14.1 mm)

166 lbs/kft (248 kg/km)

760012161-SHAQ

5202 024A XHAQ SHAQ

24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km)

760019117-SHAQ

5302 024A XHAQ SHAQ

24

Multi-unit

0.91 in (23.0 mm)

383 lbs/kft (570 kg/km)

760012179-SHAQ

LS 300 Steel Armored LSZH

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5202 002A ZHAQ SHAQ

Single Unit

0.56 in (14.1 mm)

151 lbs/kft (225 kg/km)

700009863-SHAQ

5202 004A ZHAQ SHAQ

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

700009822-SHAQ

5202 006A ZHAQ SHAQ

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

700009780-SHAQ

5202 012A ZHAQ SHAQ

12

Single Unit

0.56 in (14.1 mm)

166 lbs/kft (248 kg/km)

700009749-SHAQ

5302 024A ZHAQ SHAQ

24

Multi-unit

0.91 in (23.0 mm)

383 lbs/kft (570 kg/km)

700009707-SHAQ

5302 036A ZHAQ SHAQ

36

Multi-unit

0.91 in (23.0 mm)

385 lbs/kft (573 kg/km)

700009681-SHAQ

5302 048A ZHAQ SHAQ

48

Multi-unit

0.96 in (24.3 mm)

412 lbs/kft (614 kg/km)

700211121-SHAQ

5302 072A ZHAQ SHAQ

72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

700211139-SHAQ

LS 150 Steel Armored LSZH

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5202 002A HHAQ SHAQ

Single Unit

0.56 in (14.1 mm)

151 lbs/kft (225 kg/km)

700009889-SHAQ

5202 004A HHAQ SHAQ

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

700009848-SHAQ

5202 006A HHAQ SHAQ

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

700009806-SHAQ

5202 012A HHAQ SHAQ

12

Single Unit

0.56 in (14.1 mm)

166 lbs/kft (248 kg/km)

700009764-SHAQ

5202 024A HHAQ SHAQ

24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km)

760019091-SHAQ

5302 024A HHAQ SHAQ

24

Multi-unit

0.91 in (23.0 mm)

383 lbs/kft (570 kg/km)

700009723-SHAQ

5302 036A HHAQ SHAQ

36

Multi-unit

0.91 in (23.0 mm)

385 lbs/kft (573 kg/km)

700229511-SHAQ

5302 048A HHAQ SHAQ

48

Multi-unit

0.96 in (24.3 mm)

412 lbs/kft (614 kg/km)

700211089-SHAQ

5302 072A HHAQ SHAQ

72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

700211097-SHAQ

100

LS 550 Aluminum Armored Plenum

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5201 006A XPAQ APAQ

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (158 kg/km)

760012138-APAQ

5201 012A XPAQ APAQ

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

760006411-APAQ

5201 024A XPAQ APAQ

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

760018697-APAQ

5301 024A XPAQ APAQ

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

760012146-APAQ

5301 036A XPAQ APAQ

36

Multi-unit

0.86 in (21.7 mm)

282 lbs/kft (420 kg/km)

760024547-APAQ

5301 048A XPAQ APAQ

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

760024554-APAQ

5301 072A XPAQ APAQ

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

760024562-APAQ

5301 144A XPAQ APAQ

144

Multi-unit

1.26 in (31.9 mm)

539 lbs/kft (802 kg/km)

760024869-APAQ

LS 300 Aluminum Armored Plenum

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5201 002A ZPAQ APAQ

Single Unit

0.56 in (14.1 mm)

100 lbs/kft (148 kg/km)

700009855-APAQ

5201 004A ZPAQ APAQ

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (154 kg/km)

700009814-APAQ

5201 006A ZPAQ APAQ

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (158 kg/km)

700009772-APAQ

5201 008A ZPAQ APAQ

Single Unit

0.56 in (14.1 mm)

108 lbs/kft (160 kg/km)

760008508-APAQ

5201 012A ZPAQ APAQ

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

700009731-APAQ

5201 024A ZPAQ APAQ

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

760018689-APAQ

5301 024A ZPAQ APAQ

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

700009699-APAQ

5301 036A ZPAQ APAQ

36

Multi-unit

0.86 in (21.7 mm)

282 lbs/kft (420 kg/km)

700009673-APAQ

5301 048A ZPAQ APAQ

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

700211147-APAQ

5301 072A ZPAQ APAQ

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

700211154-APAQ

5301 096A ZPAQ APAQ

96

Multi-unit

1.26 in (31.9 mm)

569 lbs/kft (847 kg/km)

760010132-APAQ

5301 144A ZPAQ APAQ

144

Multi-unit

1.26 in (31.9 mm)

539 lbs/kft (802 kg/km)

760018879-APAQ

LS 150 Aluminum Armored Plenum

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5201 002A HPAQ APAQ

Single Unit

0.56 in (14.1 mm)

100 lbs/kft (148 kg/km)

700009871-APAQ

5201 004A HPAQ APAQ

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (154 kg/km)

700009830-APAQ

5201 006A HPAQ APAQ

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (158 kg/km)

700009798-APAQ

5201 008A HPAQ APAQ

Single Unit

0.56 in (14.1 mm)

108 lbs/kft (160 kg/km)

760008698-APAQ

5201 012A HPAQ APAQ

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

700009756-APAQ

5201 024A HPAQ APAQ

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

760018671-APAQ

5301 024A HPAQ APAQ

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

700009715-APAQ

5301 036A HPAQ APAQ

36

Multi-unit

0.86 in (21.7 mm)

282 lbs/kft (420 kg/km)

700205586-APAQ

5301 048A HPAQ APAQ

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

700211105-APAQ

5301 072A HPAQ APAQ

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

700211113-APAQ

5301 096A HPAQ APAQ

96

Multi-unit

1.26 in (31.9 mm)

569 lbs/kft (847 kg/km)

760019620-APAQ

5301 144A HPAQ APAQ

144

Multi-unit

1.26 in (31.9 mm)

539 lbs/kft (802 kg/km)

760024836-APAQ

101

LazrSPEED

LS 550 Aluminum Armored Riser

LazrSPEED

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5200 006A XRAQ ARAQ

Single Unit

0.56 in (14.1 mm)

99 lbs/kft (147 kg/km)

760012104-ARAQ

5200 012A XRAQ ARAQ

12

Single Unit

0.56 in (14.1 mm)

105 lbs/kft (157 kg/km)

760012112-ARAQ

5300 024A XRAQ ARAQ

24

Multi-unit

0.91 in (23.0 mm)

258 lbs/kft (385 kg/km)

760012120-ARAQ

5300 036A XRAQ ARAQ

36

Multi-unit

0.91 in (23.0 mm)

264 lbs/kft (393 kg/km)

760026831-ARAQ

5300 048A XRAQ ARAQ

48

Multi-unit

0.96 in (24.3 mm)

283 lbs/kft (422 kg/km)

760026849-ARAQ

5300 072A XRAQ ARAQ

72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km)

760026856-ARAQ

5300 096A XRAQ ARAQ

96

Multi-unit

1.26 in (31.9 mm)

528 lbs/kft (786 kg/km)

760026864-ARAQ

5300 144A XRAQ ARAQ

144

Multi-unit

1.36 in (34.4 mm)

558 lbs/kft (830 kg/km)

760026872-ARAQ

LS 300 Aluminum Armored Riser

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5200 002A ZRAQ ARAQ

Single Unit

0.56 in (14.1 mm)

92 lbs/kft (137 kg/km)

700208127-ARAQ

5200 004A ZRAQ ARAQ

Single Unit

0.56 in (14.1 mm)

97 lbs/kft (144 kg/km)

700208135-ARAQ

5200 006A ZRAQ ARAQ

Single Unit

0.56 in (14.1 mm)

99 lbs/kft (147 kg/km)

700208143-ARAQ

5200 008A ZRAQ ARAQ

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

760008516-ARAQ

5200 012A ZRAQ ARAQ

12

Single Unit

0.56 in (14.1 mm)

105 lbs/kft (157 kg/km)

700208150-ARAQ

5300 024A ZRAQ ARAQ

24

Multi-unit

0.91 in (23.0 mm)

258 lbs/kft (385 kg/km)

700208168-ARAQ

5300 036A ZRAQ ARAQ

36

Multi-unit

0.91 in (23.0 mm)

264 lbs/kft (393 kg/km)

700208176-ARAQ

5300 048A ZRAQ ARAQ

48

Multi-unit

0.96 in (24.3 mm)

283 lbs/kft (422 kg/km)

700208218-ARAQ

5300 072A ZRAQ ARAQ

72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km)

700208226-ARAQ

LS 150 Aluminum Armored Riser

Product Number

Weight

Material ID

5200 002A HRAQ ARAQ 2

Fiber Count Construction Type Outside Diameter

Single Unit

0.56 in (14.1 mm)

92 lbs/kft (137 kg/km)

700203052-ARAQ

5200 004A HRAQ ARAQ 4

Single Unit

0.56 in (14.1 mm)

97 lbs/kft (144 kg/km)

700203060-ARAQ

5200 006A HRAQ ARAQ 6

Single Unit

0.56 in (14.1 mm)

99 lbs/kft (147 kg/km)

700203078-ARAQ

5200 008A HRAQ ARAQ 8

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

760008706-ARAQ

5200 012A HRAQ ARAQ 12

Single Unit

0.56 in (14.1 mm)

105 lbs/kft (157 kg/km)

700203086-ARAQ

5300 024A HRAQ ARAQ 24

Multi-unit

0.91 in (23.0 mm)

258 lbs/kft (385 kg/km)

700203094-ARAQ

5300 036A HRAQ ARAQ 36

Multi-unit

0.91 in (23.0 mm)

264 lbs/kft (393 kg/km)

700203102-ARAQ

5300 048A HRAQ ARAQ 48

Multi-unit

0.96 in (24.3 mm)

283 lbs/kft (422 kg/km)

700203110-ARAQ

5300 072A HRAQ ARAQ 72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km)

700203128-ARAQ

5300 144A HRAQ ARAQ 144

Multi-unit

1.36 in (34.4 mm)

558 lbs/kft (830 kg/km)

760024810-ARAQ

102

LS 550 Aluminum Armored LSZH

Product Number

Weight

Material ID

5202 006A XHAQ AHAQ 6

Fiber Count Construction Type Outside Diameter

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (153 kg/km)

760012153-AHAQ

5202 012A XHAQ AHAQ 12

Single Unit

0.56 in (14.1 mm)

109 lbs/kft (163 kg/km)

760012161-AHAQ

5302 024A XHAQ AHAQ 24

Multi-unit

0.91 in (23.0 mm)

273 lbs/kft (406 kg/km)

760012179-AHAQ

Weight

Material ID

LS 300 Aluminum Armored LSZH

Product Number

Fiber Count Construction Type Outside Diameter

5202 002A ZHAQ AHAQ 2

Single Unit

0.56 in (14.1 mm)

94 lbs/kft (140 kg/km)

700009863-AHAQ

5202 004A ZHAQ AHAQ 4

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

700009822-AHAQ

5202 006A ZHAQ AHAQ 6

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (153 kg/km)

700009780-AHAQ

5202 008A ZHAQ AHAQ 8

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (153 kg/km)

760026336-AHAQ

5202 012A ZHAQ AHAQ 12

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (157 kg/km)

700009749-AHAQ

5202 024A ZHAQ AHAQ 24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km)

760019109-AHAQ

5302 024A ZHAQ AHAQ 24

Multi-unit

0.91 in (23.0 mm)

273 lbs/kft (406 kg/km)

700009707-AHAQ

5302 036A ZHAQ AHAQ 36

Multi-unit

0.91 in (23.0 mm)

275 lbs/kft (409 kg/km)

700009681-AHAQ

5302 048A ZHAQ AHAQ 48

Multi-unit

0.96 in (24.3 mm)

296 lbs/kft (440 kg/km)

700211121-AHAQ

5302 072A ZHAQ AHAQ 72

Multi-unit

1.11 in (28.1 mm)

414 lbs/kft (616 kg/km)

700211139-AHAQ

LS 150 Aluminum Armored LSZH

Product Number

Weight

Material ID

5202 002A HHAQ AHAQ 2

Fiber Count Construction Type Outside Diameter

Single Unit

0.56 in (14.1 mm)

94 lbs/kft (140 kg/km)

700009889-AHAQ

5202 004A HHAQ AHAQ 4

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

700009848-AHAQ

5202 006A HHAQ AHAQ 6

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (153 kg/km)

700009806-AHAQ

5202 012A HHAQ AHAQ 12

Single Unit

0.56 in (14.1 mm)

109 lbs/kft (163 kg/km)

700009764-AHAQ

5202 024A HHAQ AHAQ 24

Single Unit

0.66 in (16.6 mm)

151 lbs/kft (224 kg/km)

760019091-AHAQ

5302 024A HHAQ AHAQ 24

Multi-unit

0.91 in (23.0 mm)

273 lbs/kft (406 kg/km)

700009723-AHAQ

5302 036A HHAQ AHAQ 36

Multi-unit

0.91 in (23.0 mm)

275 lbs/kft (409 kg/km)

700229511-AHAQ

5302 048A HHAQ AHAQ 48

Multi-unit

0.96 in (24.3 mm)

296 lbs/kft (440 kg/km)

700211089-AHAQ

5302 072A HHAQ AHAQ 72

Multi-unit

1.11 in (28.1 mm)

414 lbs/kft (616 kg/km)

700211097-AHAQ

103

LazrSPEED

LazrSPEED Multimode
Outdoor Loose
Tube Cables
The LazrSPEED Loose Tube Dielectric cable is constructed with
industry standard 3 mm gel-filled, buffer tubes, stranded around
a central strength member.
The LazrSPEED Loose Tube Metallic cable is armored with a
corrugated polymer coated steel tape, and constructed with
industry standard 3 mm gel-filled, buffer tubes, stranded around
a central strength member. The armor layer provides added
crush protection and meets the Telcordia requirements for superior armored cable.
LazrSPEED

The buffer tubes are compatible with standard hardware, cable routing and fan-out kits. The cable core is water blocked with dry
water blocking materials, making access and handling of individual tubes easier and craft-friendly. These cables are designed for
point-to-point applications as well as mid-span access, and provide a high-level of protection for fiber installed in the outside
plant environment.

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 50 micron

Buffer tubes and fibers are identified with standard color coding.

LS 550 Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5024 004A XXBK

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760007351

5024 006A XXBK

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760007369

5024 012A XXBK

12

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760007377

5024 018A XXBK

18

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760007385

5024 024A XXBK

24

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760007393

5024 036A XXBK

36

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760007401

5024 048A XXBK

48

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760007419

5024 072A XXBK

72

0.49 in (12.6 mm)

74 lbs/kft (110 kg/km)

760007427

5024 096A XXBK

96

0.57 in (14.6 mm)

97 lbs/kft (145 kg/km)

760007435

5024 144A XXBK

144

0.74 in (18.8 mm)

148 lbs/kft (220 kg/km)

760007443

5024 288A XXBK

288

0.86 in (21.8 mm)

192 lbs/kft (286 kg/km)

760007450

104

LS 300 Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5024 004A ZXBK

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002782

5024 006A ZXBK

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002790

5024 012A ZXBK

12

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002808

5024 018A ZXBK

18

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002816

5024 024A ZXBK

24

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002824

5024 036A ZXBK

36

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002832

5024 048A ZXBK

48

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002840

5024 072A ZXBK

72

0.49 in (12.6 mm)

74 lbs/kft (110 kg/km)

760002857

5024 096A ZXBK

96

0.57 in (14.6 mm)

97 lbs/kft (145 kg/km)

760002865

5024 144A ZXBK

144

0.74 in (18.8 mm)

148 lbs/kft (220 kg/km)

760002873

5024 196A ZXBK

196

0.74 in (18.8 mm)

145 lbs/kft (216 kg/km)

760025494

5024 288A ZXBK

288

0.86 in (21.8mm)

192 lbs/kft (286 kg/km)

760002881

LS 150 Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5024 192A HXBK

192

0.74 in (18.8 mm)

145 lbs/kft (216 kg/km)

760026229

5024 196A HXBK

196

0.74 in (18.8 mm)

145 lbs/kft (216 kg/km)

760027318

LS 550 Metallic
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5023 004A XXBK

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760007245

5023 006A XXBK

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760007252

5023 012A XXBK

12

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760007260

5023 018A XXBK

18

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760007278

5023 024A XXBK

24

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760007286

5023 036A XXBK

36

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760007294

5023 048A XXBK

48

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760007302

5023 072A XXBK

72

0.55 in (14.0 mm)

119 lbs/kft (177 kg/km)

760007310

5023 096A XXBK

96

0.63 in (16.1 mm)

148 lbs/kft (220 kg/km)

760007328

5023 144A XXBK

144

0.80 in (20.3 mm)

214 lbs/kft (319 kg/km)

760007336

5023 288A XXBK

288

0.91 in (23.3 mm)

267 lbs/kft (398 kg/km)

760007344

105

LazrSPEED

LS 300 Metallic

LazrSPEED

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5023 004A ZXBK

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002469

5023 006A ZXBK

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002477

5023 012A ZXBK

12

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002485

5023 018A ZXBK

18

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002493

5023 024A ZXBK

24

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002501

5023 036A ZXBK

36

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002519

5023 048A ZXBK

48

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002527

5023 072A ZXBK

72

0.55 in (14.0 mm)

119 lbs/kft (177 kg/km)

760002535

5023 096A ZXBK

96

0.63 in (16.1 mm)

148 lbs/kft (220 kg/km)

760002543

5023 144A ZXBK

144

0.80 in (20.3 mm)

214 lbs/kft (319 kg/km)

760002550

5023 288A ZXBK

288

0.91 in (23.3 mm)

267 lbs/kft (398 kg/km)

760002568

106

LazrSPEED Multimode
Outdoor Central
Tube Cable
The LazrSPEED Dielectric and Metallic Sheath Cable can be used in
underground conduit, direct buried or aerial applications. The cable
is designed for easy mid-sheath entry. The fibers are separated into
binder groups inside a central tube gel-filled with water-blocking
compound. The steel armor provides rodent and lightning protection. The sheath jacket material is medium-density polyethylene for
maximum environmental protection and is petrochemical stable.

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

LazrSPEED

Physical Specifications:

Core Size: 50 micron

Buffer tubes and fibers are identified with standard color coding.

LS 300 Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5022 006A ZXBK

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700012347

5022 012A ZXBK

12

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700012354

5022 024A ZXBK

24

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700012362

5022 036A ZXBK

36

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700219116

5022 048A ZXBK

48

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700012370

5022 096A ZXBK

96

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

700012388

LS 150 Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5022 016A HXBK

16

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760027771

LS 150 Metallic
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5021 006A HXBK

0.43 in (11 mm)

92 lb/kft (137 kg/m)

760015800

5021 012A HXBK

12

0.43 in (11 mm)

92 lb/kft (137 kg/m)

760017202

5021 024A HXBK

24

0.43 in (11 mm)

92 lb/kft (137 kg/m)

760021758

107

LazrSPEED Multimode
Indoor/Outdoor
Loose Tube Cable

LazrSPEED

The Plenum-Rated and Riser-Rated Indoor/Outdoor Stranded

Loose Tube Dielectric Cable allows for connectivity ease and
superior mid-span accessibility. The cable is designed to
endure the rigors of outdoor use, but can also be run directly
in plenum airspace or riser to eliminate a splice point at the
building entrance. This cable provides seamless migration
from the campus to the premises by bypassing termination
requirements at the building entrance, thereby reducing
the total cost of ownership. The basic construction utilizes
standard 3.0 mm gel-filled (5124 series) or dry block (5125 series) buffer tubes
which contain up to 12 optical fibers, buffer tubes are stranded around a rigid fiberglass central strength member for
protection against thermal expansion and contraction at operational temperature extremes.
A fluoropolymer thermoplastic material is used for the outer jacket and buffer tubes to provide excellent petrochemical
resistance, flame propagation and smoke generation properties that exceeds any similar cable design on the market today.
These cables are designed for installation loads up to 600 lbs (2,700 N) and long term loads up to 180 lbs (800 N).
All cables meet the mechanical and environmental requirements of Telcordia GR-20-CORE Issue 2 Generic Requirements for
Optical Fiber and Optical Fiber Cable and ANSI/ICEA S-87-640 Standard for Optical Fiber Outside Plan Communications Cable.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22 to 140F (-30C to 60C)
Storage Temperature: -40 to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Cable Jacket: UV Stabilized Black

Core Size: 50 Micron
Buffer tubes and fibers are identified with standard color coding.

LS 550 Plenum
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5125 006A XPBK

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016873

5125 024A XPBK

24

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016881

5125 036A XPBK

36

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016899

5125 048A XPBK

48

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016907

5125 072A XPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760016915

5125 012A XPBK

12

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760014837

108

LS 300 Plenum
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5125 006A ZPBK

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016808

5125 012A ZPBK

12

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016816

5125 024A ZPBK

24

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016824

5125 036A ZPBK

36

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016832

5125 048A ZPBK

48

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760012385

5125 072A ZPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760017020

LS 150 Plenum
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5125 006A HPBK

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016717

5125 012A HPBK

12

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016725

5125 024A HPBK

24

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016733

5125 036A HPBK

36

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016741

5125 048A HPBK

48

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016758

5125 072A HPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760016766

LS 300 Riser
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5124 144A ZRBK

144

0.78 in (19.8 mm)

239 lbs/kft (357 kg/km)

760027557

5124 288A ZRBK

288

0.92 in (23.4 mm)

298 lbs/kft (445 kg/km)

760025403

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5124 048A HRBK

48

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760015610

5124 096A HRBK

96

0.62 in (15.7 mm)

152 lbs/kft (226 kg/km)

760015628

5124 144A HRBK

144

0.78 in (19.8 mm)

239 lbs/kft (357 kg/km)

760015602

5124 288A HRBK

288

0.92 in (23.4 mm)

298 lbs/kft (445 kg/km)

760024851

LS 150 Riser

109

LazrSPEED

LazrSPEED Multimode
Indoor/Outdoor Tight
Buffered Cable
The indoor/outdoor distribution cable provides network
performance for the applications of today and tomorrow that can
be used in non-traditional building entrance facilities.

Features and Benefits:

LazrSPEED

900 micron tight buffered construction allows for direct

termination eliminating the need for furcation which
minimizes installation expense
Utilizes water blocking technology which makes the cable suitable for the outside plant environment, with gel-free cable access
Black, UV stabilized jacket is resistant to chemical, moisture, abrasion and sunlight and does not require
additional protection in most installations
All-dielectric construction eliminates the need for bonding and grounding
Tested and qualified to GR-409 with GR-20, environmental limits and; ICEA-696 and ICEA-640 environmental limits.
Meets requirements for tight buffered constructions and suitable of installation in true OSP environmental conditions
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 158F (-30C to 70C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: Exceeds 126 lbf/in (22 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds 4.34 lb-ft (5.88 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 100 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 50 micron

Fibers are identified with standard color coding.

LS 550 Plenum
Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5101 002A XPBK

Single Unit

0.17 in (4.2 mm)

10.7 lbs/kft (16 kg/km)

760037408

5101 004A XPBK

Single Unit

0.19 in (4.8 mm)

15.3 lbs/kft (23 kg/km)

760037416

5101 006A XPBK

Single Unit

0.20 in (5.1 mm)

18.7 lbs/kft (28 kg/km)

760036426

5101 008A XPBK

Single Unit

0.23 in (5.8 mm)

25.0 lbs/kft (37 kg/km)

760037424

5101 012A XPBK

12

Single Unit

0.27 in (6.9 mm)

36.0 lbs/kft (54 kg/km)

760037432

5101 018A XPBK

18

Single Unit

0.28 in (7.1 mm)

32.2 lbs/kft (48 kg/km)

760037440

5101 024A XPBK

24

Single Unit

0.31 in (7.9 mm)

41.4 lbs/kft (62 kg/km)

760037457

5104 036A XPBK

36

Multi-unit

0.67 in (17.1 mm)

174 lbs/kft (259 kg/km)

760038133

5104 048A XPBK

48

Multi-unit

0.74 in (18.9 mm)

222 lbs/kft (330 kg/km)

760038141

5104 060A XPBK

60

Multi-unit

0.85 in (21.5 mm)

287 lbs/kft (427 kg/km)

760038158

5104 072A XPBK

72

Multi-unit

0.93 in (23.7 mm)

357 lbs/kft (532 kg/km)

760038166

5104 096A XPBK

96

Multi-unit

1.11 in (28.2 mm)

542 lbs/kft (806 kg/km)

760038174

5104 144A XPBK

144

Multi-unit

1.19 in (30.3 mm)

558 lbs/kft (831 kg/km)

760038182

110

LS 300 Plenum
Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5101 002A ZPBK

Single Unit

0.17 in (4.2 mm)

10.7 lbs/kft (16 kg/km)

760037341

5101 004A ZPBK

Single Unit

0.19 in (4.8 mm)

15.3 lbs/kft (23 kg/km)

760037358

5101 006A ZPBK

Single Unit

0.20 in (5.1 mm)

18.7 lbs/kft (28 kg/km)

760036418

5101 008A ZPBK

Single Unit

0.23 in (5.8 mm)

25.0 lbs/kft (37 kg/km)

760037366

5101 012A ZPBK

12

Single Unit

0.27 in (6.9 mm)

36.0 lbs/kft (54 kg/km)

760037374

5101 018A ZPBK

18

Single Unit

0.28 in (7.1 mm)

32.2 lbs/kft (48 kg/km)

760037382

5101 024A ZPBK

24

Single Unit

0.31 in (7.9 mm)

41.1 lbs/kft (62 kg/km)

760037390

5104 036A ZPBK

36

Multi-unit

0.67 in (17.1 mm)

174 lbs/kft (259 kg/km)

760038075

5104 048A ZPBK

48

Multi-unit

0.74 in (18.9 mm)

222 lbs/kft (330 kg/km)

760038083

5104 060A ZPBK

60

Multi-unit

0.85 in (21.5 mm)

287 lbs/kft (427 kg/km)

760038091

5104 072A ZPBK

72

Multi-unit

0.93 in (23.7 mm)

357 lbs/kft (532 kg/km)

760038109

5104 096A ZPBK

96

Multi-unit

1.11 in (28.2 mm)

542 lbs/kft (806 kg/km)

760038117

5104 144A ZPBK

144

Multi-unit

1.19 in (30.3 mm)

558 lbs/kft (831 kg/km)

760038125

LS 150 Plenum
Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5101 002A HPBK

Single Unit

0.17 in (4.2 mm)

10.7 lbs/kft (16 kg/km)

760037283

5101 004A HPBK

Single Unit

0.19 in (4.8 mm)

15.3 lbs/kft (23 kg/km)

760037291

5101 006A HPBK

Single Unit

0.20 in (5.1 mm)

18.7 lbs/kft (28 kg/km)

760036400

5101 008A HPBK

Single Unit

0.23 in (5.8 mm)

25.0 lbs/kft (37 kg/km)

760037309

5101 012A HPBK

12

Single Unit

0.27 in (6.9 mm)

36.0 lbs/kft (54 kg/km)

760037317

5101 018A HPBK

18

Single Unit

0.28 in (7.1 mm)

32.2 lbs/kft (48 kg/km)

760037325

5101 024A HPBK

24

Single Unit

0.31 in (7.9 mm)

41.4 lbs/kft (62 kg/km)

760037333

5104 036A HPBK

36

Multi-unit

0.67 in (17.1 mm)

174 lbs/kft (259 kg/km)

760038018

5104 048A HPBK

48

Multi-unit

0.74 in (18.9 mm)

222 lbs/kft (330 kg/km)

760038026

5104 060A HPBK

60

Multi-unit

0.85 in (21.5 mm)

287 lbs/kft (427 kg/km)

760038034

5104 072A HPBK

72

Multi-unit

0.93 in (23.7 mm)

357 lbs/kft (532 kg/km)

760038042

5104 096A HPBK

96

Multi-unit

1.11 in (28.2 mm)

542 lbs/kft (806 kg/km)

760038059

5104 144A HPBK

144

Multi-unit

1.19 in (30.3 mm)

558 lbs/kft (831 kg/km)

760038067

111

LazrSPEED

LS 550 Riser

LazrSPEED

Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5100 006A XRBK

0.22 in (5.5 mm)

18 lbs/kft (26 kg/km)

760039974

Single Unit

5100 008A XRBK

Single Unit

0.25 in (6.3 mm)

24 lbs/kft (35 kg/km)

760039982

5100 012A XRBK

12

Single Unit

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

760006650

5103 024A XRBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

760007476

5103 036A XRBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

760007484

LS 300 Riser
Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5100 006A ZRBK

0.22 in (5.5 mm)

18 lbs/kft (26 kg/km)

760039966

Single Unit

5100 008A ZRBK

Single Unit

0.25 in (6.3 mm)

24 lbs/kft (35 kg/km)

760031666

5100 012A ZRBK

12

Single Unit

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

700210982

5103 024A ZRBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

700210990

5103 036A ZRBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

700211006

5103 048A ZRBK

48

Multi-unit

0.79 in (20.0 mm)

198 lbs/kft (295 kg/km)

760010371

5103 072A ZRBK

72

Multi-unit

0.94 in (23.9 mm)

309 lbs/kft (460 kg/km)

760019612

LS 150 Riser
Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5100 012A HRBK

12

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

700211014

Single Unit

5103 024A HRBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

700211022

5103 036A HRBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

700211030

112

LS 550 LSZH
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5102 012A XHBK

12

Single Unit

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

760007492

5105 024A XHBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

760007500

5105 036A XHBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

760007518

5105 072A XHBK

72

Multi-unit

0.94 in (23.9 mm)

309 lbs/kft (460 kg/km)

760032441

LS 300 LSZH

LazrSPEED

Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5102 004A ZHBK

Single Unit

0.20 in (5.1 mm)

14 lbs/kft (20 kg/km)

760012005

5102 006A ZHBK

Single Unit

0.22 in (5.5 mm)

18 lbs/kft (26 kg/km)

760015289

5102 008A ZHBK

Siingle Unit

0.25 in (6.3 mm)

24 lbs/kft (35 kg/km)

760031674

5102 012A ZHBK

12

Single Unit

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

700010119

5105 024A ZHBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

700205560

5105 036A ZHBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

700205578

5105 048A ZHBK

48

Multi-unit

0.79 in (20.0 mm)

198 lbs/kft (295 kg/km)

760012013

Construction Type

Outside Diameter

Weight

Material ID

LS 150 LSZH
Product Number

Fiber Count

5102 004A HHBK

Single Unit

0.20 in (5.1 mm)

14 lbs/kft (20 kg/km)

760035782

5102 006A HHBK

Single Unit

0.22 in (5.5 mm)

18 lbs/kft (26 kg/km)

760035790

5102 012A HHBK

12

Single Unit

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

760002170

5105 024A HHBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

760002188

5105 036A HHBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

760002196

113

LazrSPEED Multimode
Fiber Optic Patch
Cords and Pigtails
Fiber patch cords are used to connect fiber optic equipment
to fiber optic cross-connects, interconnects and information
outlets. The SYSTIMAX LazrSPEED fiber optic patch cord family is
configurable with standard LC, SC, and ST terminations, and is
available in either 1.6 mm or 3.0 mm simplex or duplex zipcord.

LazrSPEED

At just 1.6 mm diameter the LazrSPEED LC cords are ideal for

high-density applications. Test results by SYSTIMAX Labs per
TIA/EIA 455 procedures and IEC 794 methods also show that
the 1.6 mm cordage exceeds the requirements for larger diameter
cordage. This smaller cordage allows at least twice as many fibers to be installed in a cabinet.
LazrSPEED fiber optic patch cords are offered in riser, plenum and low smoke zero halogen (LSZH) options. Using the Fiber Patch Cord
Identifier (in Fiber Reference section), fiber patch cord can be ordered with custom configured cordage size, jacket type and length
in either feet or meters, providing the ultimate in flexibility to meet any cabling infrastructure design. LSZH fiber patch cords are
available for international region only.

Physical Specifications:

1.6 mm and 3.0 mm Patch Cords

Outside Diameter (simplex):
1.6 mm: 1.6 mm
3.0 mm: 3.0 mm
Outside Diameter (zip cord):
1.6 mm: 1.6 mm x 3.3 mm
3.0 mm: 3.0 mm x 5.9 mm
Minimum Cable Retention Strength:
1.6 mm: 11.24 lbs (50 N)
3.0 mm: 11.24 lbs (50 N)
Minimum Bend Radius:
1.6 mm: Loaded: 2.0 in (5.1 cm)
Unloaded: 1.4 in (3.5 cm)
3.0 mm: Loaded: 2.3 in (5.8 cm)
Unloaded: 1.4 in (3.5 cm)
Maximum Cordage Tensile Load:
1.6 mm: Short Term: 70 lbs (311 N)
Long Term: 21 lbs (93 N)
3.0 mm: Short Term: 90 lbs (400 N)
Long Term: 27 lbs (120 N)

Optical Specifications:

Fiber Type: LOMM 50 micron LazrSPEED fiber

Minimum Bandwidth:
4,700 MHz-km (laser) @ 850 nm
3,500 MHz-km (OFL) @ 850 nm
500 MHz-km (laser) @ 1,300 nm
500 MHz-km (OFL) @ 1,300 nm
Max. Attenuation:
3.0 dB/km @ 850 nm
1.0 dB/km @ 1,300 nm

Pigtails
Detailed Description

Fire Rating

Fiber Count

Length

LazrSPEED 550 LC / UC 0.9 mm Pigtail, Ruggedized

Riser

Configurable

FPC Code
FPCXLCUC11-R

LazrSPEED 550 SC / UC 0.9 mm Pigtail, Ruggedized

Riser

Configurable

FPCXSCUC11-R

LazrSPEED 550 STII+ / UC 0.9 mm Pigtail, Ruggedized

Riser

Configurable

FPCXEPUC11-R
FPCXLCUC01-R

LazrSPEED 550 LC / UC 0.9 mm Pigtail, Tight Buffered Fiber

Riser

Configurable

LazrSPEED 550 SC / UC 0.9 mm Pigtail, Tight Buffered Fiber

Riser

Configurable

FPCXSCUC01-R

LazrSPEED 550 STII+ / UC 0.9 mm Pigtail, Tight Buffered Fiber

Riser

Configurable

FPCXEPUC01-R

114

1.6 mm Patch Cords

Detailed Description

Fire Rating

Fiber Count

Length

FPC Code

LazrSPEED 550 LC / LC 1.6 mm Duplex

Riser

Configurable

FPCXLCLC22-R

LazrSPEED 550 LC / LC 1.6 mm Simplex

Riser

Configurable

FPCXLCLC21-R

LazrSPEED 550 LC / SC 1.6 mm Duplex

Riser

Configurable

FPCXLCSC22-R

LazrSPEED 550 LC / STII+ 1.6 mm Duplex

Riser

Configurable

FPCXLCEP22-R

LazrSPEED 550 LC / STII+ 1.6 mm Simplex

Riser

Configurable

FPCXLCEP21-R

LazrSPEED 550 SC / SC 1.6 mm Duplex

Riser

Configurable

FPCXSCSC22-R

LazrSPEED 550 SC / SC 1.6 mm Simplex

Riser

Configurable

FPCXSCSC21-R

LazrSPEED 550 SC / STII+ 1.6 mm Duplex

Riser

Configurable

FPCXSCEP22-R

LazrSPEED 550 SC / STII+ 1.6 mm Simplex

Riser

Configurable

FPCXSCEP21-R

LazrSPEED 550 LC / LC 1.6 mm Duplex

LSZH*

Configurable

FPCXLCLC22-H

LazrSPEED 550 SC / SC 1.6 mm Duplex

LSZH*

Configurable

FPCXSCSC22-H

LazrSPEED 550 LC / SC 1.6 mm Duplex

LSZH*

Configurable

FPCXLCSC22-H

Detailed Description

Fire Rating

Fiber Count

Length

FPC Code

LazrSPEED 550 SC / SC 3.0 mm Duplex

Riser

Configurable

FPCXSCSC32-R

LazrSPEED 550 SC / SC 3.0 mm Simplex

Riser

Configurable

FPCXSCSC31-R

3.0 mm Patch Cords

LazrSPEED 550 SC / STII+ 3.0 mm Duplex

Riser

Configurable

FPCXSCEP32-R

LazrSPEED 550 SC / STII+ 3.0 mm Simplex

Riser

Configurable

FPCXSCEP31-R

LazrSPEED 550 STII+ / STII+ 3.0 mm Duplex

Riser

Configurable

FPCXEPEP32-R

LazrSPEED 550 STII+ / STII+ 3.0 mm Simplex

Riser

Configurable

FPCXEPEP31-R

LazrSPEED 550 LC-LC 3.0 mm Simplex

Plenum

Configurable

FPCXLCLC31-P

LazrSPEED 550 LC-LC 3.0 mm Duplex

Plenum

Configurable

FPCXLCLC32-P

LazrSPEED 550 STII-STII 3.0 mm simplex

Plenum

Configurable

FPCXSTST31-P

LazrSPEED 550 STII-STII 3.0 mm Duplex

Plenum

Configurable

FPCXSTST32-P

LazrSPEED 550 SC-SC 3.0 mm Simplex

Plenum

Configurable

FPCXSCSC31-P

LazrSPEED 550 SC-SC 3.0 mm Duplex

Plenum

Configurable

FPCXSCSC32-P

LazrSPEED 550 LC-STII 3.0 mm Simplex

Plenum

Configurable

FPCXLCST31-P

LazrSPEED 550 LC-STII 3.0 mm Duplex

Plenum

Configurable

FPCXLCST32-P

LazrSPEED 550 LC-SC 3.0 mm Simplex

Plenum

Configurable

FPCXLCSC31-P

LazrSPEED 550 LC-SC 3.0 mm Duplex

Plenum

Configurable

FPCXLCSC32-P

LazrSPEED 550 SC-STII, 3.0 mm Simplex

Plenum

Configurable

FPCXSCST31-P

LazrSPEED 550 SC-STII, 3.0 mm Duplex

Plenum

Configurable

FPCXSCST32-P

LazrSPEED 550 SC / SC 3.0 mm Duplex

LSZH*

Configurable

FPCXSCSC32-H

LazrSPEED 550 STII-STII 3.0 mm Duplex

LSZH*

Configurable

FPCXSTST32-H

LazrSPEED 550 SC-STII, 3.0 mm Duplex

LSZH*

Configurable

FPCXSCST32-H

LazrSPEED 550 LC-STII 3.0 mm Duplex

LSZH*

Configurable

FPCXLCST32-H

* LSZH fiber optic patch cords are offered in international only.

Hybrid MTRJ fiber patch cords are also available. Please refer to the Fiber Patch Cord Product Identifier for ordering information.

115

LazrSPEED

LazrSPEED

116

TeraSPEED Solution
Zero Water Peak Singlemode
1 Fiber optic LIU/489 FIU
2 Racks and cabinets

3 Equipment room:
-600 G2 modular shelf and panel shelf
-1000 G2 modular shelf and panel shelf
4 Telecom closet:
-600 G2 modular shelf and panel shelf
-1000 G2 modular shelf and panel shelf

5 Faceplate/multimedia information outlet

TeraSPEED outside plant cable
TeraSPEED indoor/outdoor cable
TeraSPEED indoor cable
TeraSPEED patch cord
TeraSPEED

TeraSPEED riser cable

2
3

TeraSPEED Solution

Features and Benefits:

Zero water peak singlemode fiber

G.652.C/D compliant
Lowest loss fiber available at 1,383 nm E-band
Supports legacy singlemode equipment and applications
60% more usable wavelengths
Maximizes support for lowest cost CWDM technology and delivers lowest cost path to future singlemode applications
Lowest loss small form factor connector available in the industry - LC Connector

SYSTIMAX TeraSPEED Solution was developed to provide a fiber optic solution that is the Metro/Campus backbone for both
todays performance requirements. TeraSPEED cables provide the widest possible usable wavelength spectrum by eliminating the
high loss caused by water impurities in the 1,400 nm region. With this water peak eliminated, the entire spectrum from 1,260 nm
to 1,620 nm is available, allowing for future expansion of data rates and additional services by the use of cost-effective coarse
wavelength division multi-plexing (CWDM).
In addition to LC connectors, TeraSPEED Solution supports the duplex SC connector as well as the ST II+ connector. An extensive
line of wall and rack mounted cabinets and telecommunication outlets for building entrance facilities, equipment rooms,
telephone closets/floor distributors and work areas are available.
SYSTIMAX channels comprised exclusively of TeraSPEED singlemode passive products, end-to-end, are capable of delivering in
excess of 10 Gigabit per second in accordance with application standards.

TeraSPEED products include:

Building Cable
Indoor/Outdoor Cable
Outside Plant Cable (where appropriate for the enterprise market)
LC Connectors (SC or ST II+ connectors available for limited applications and connections)
Splice and Termination Shelves
Multimedia Outlets and Boxes
Connectorized Patch Cords

117

TeraSPEED Specifications
TeraSPEED Optical Fiber
Dispersion-Unshifted, Matched-Clad Singlemode Fiber

Physical Characteristics

Mechanical Characteristics

Cladding Diameter

125.0 0.7 m

Proof Test

100 kpsi (0.69 Gpa)

Core/Clad Offset

0.5 m

Coating Strip Force

0.3 - 2.0 lbf (1.3 - 8.9 N)

Coating Diameter (Uncolored)

245 10 m

Fiber Curl

4m

Coating Diameter (Colored)

254 7 m

Dynamic Fatigue Parameter (nd) 18

Coating/Cladding Concentricity Error, Max. 12 m

TeraSPEED

Clad Non-Circularity

Macrobending, Max. (100 turns)

0.05 dB (1,310/1,550 nm @ 50 mm)

0.05 dB (1,625 nm @ 60 mm)

Macrobending, Max. (1 turn @

32 mm mandrel)

0.05 dB @ 1,550 nm

1%

Optical Characteristics, Wavelength Specific

1310 nm

1385 nm

1550 nm

Max. Attenuation, Loose Tube Cable

0.34 dB/km

0.31 dB/km

0.22 dB/km

Max. Attenuation, Tight Buffer Cable

0.70 dB/km

0.70 dB/km

0.70 dB/km

Mode Field Diameter

9.2 0.3 m

9.6 0.6 m

10.4 0.5 m

Group Refractive Index

1.466

1.466

1.467

Dispersion, Max.

3.5 ps/(nm-km) from 1,285 to 1,330 nm

Optical Characteristics, General

18 ps/(nm-km)

Environmental Characteristics

Point Defects, Max.

0.10 dB

Temperature Dependence -76F to 185F (-60C to 85C)

0.05 dB

Cut-off Wavelength

1260

0.05 dB

Zero Dispersion Wavelength

1,302-1,322 nm

Temperature Humidity Cycling 14F to 185F (-10C to 85C)

up to 95% RH

Zero Dispersion Slope, Max.

0.090 ps/[km-nm-nm]

Water Immersion, 73.4F (23C)

0.05 dB

0.06 ps/sqrt (km)

Heat Aging, 185F (85C)

0.05 dB

Polarization Mode Dispersion

Link Design Value

118

TeraSPEED Singlemode
Building Cable
The TeraSPEED Singlemode Building Cable is a dispersion unshifted,
matched clad fiber which meets the ITU-T G.652 requirements.
This fiber is fully capable of handling existing and legacy singlemode
applications which traditionally operate in the 1,310 nm and 1,550
nm regions. It is also designed to handle the new and emerging
applications that utilize the extended E-band, 1,360 nm to 1,460 nm.
This fiber is the choice for 16-channel course wavelength division multiplexing applications because it is designed to provide optimum performance from 1,265 nm to 1,625 nm.
The TeraSPEED enhanced singlemode cable consists of single unit and multi-unit match clad optical fibers, aramid strength yarn
and an outer jacket. It complies with the requirements of the National Electrical Code, Article 770-51; ANSI/TIA/EIA 568B.3, Optical
Fiber Cabling Components Standard and Telcordia Generic Requirements for Premises Fiber Optic Cable (GR-409-CORE), Section 6.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Features and Benefits:

Zero-water-peak singlemode fiber provides an increase of 50% on the bandwidth capabilities
It is compatible with other singlemode fiber types
It supports CWDM (Course Wave Division Multi-plexing) and provides at least 33% more channels than conventional
singlemode fiber
Long term reliability

Environmental and Mechanical Specifications:

Operating Temperature: -4F to 158F (-20C to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0C to 70C)
Storage Temperature: -40F to 158F (-40C to 70C)
Crush Resistance: 57.3 lbf/in (10 N/mm) (Test Method: FOTP 41)
Impact Resistance: 4.34 lbf-ft (5.8 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 100 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 8.3 micron ( 9 micron mode field diameter)

Fibers are identified with standard color coding.

TS Plenum
Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5201 002A WPYL

Single Unit

0.15 in (3.9 mm)

8.8 lbs/kft (13.1 kg/km)

760004317

5201 004A WPYL

Single Unit

0.17 in (4.4 mm)

12.2 lbs/kft (18 kg/km)

760004325

5201 006A WPYL

Single Unit

0.19 in (4.8 mm)

15.1 lbs/kft (22 kg/km)

760004333

5201 008A WPYL

Single Unit

0.20 in (5.1 mm)

16.8 lbs/kft (25 kg/km)

760004341

5201 012A WPYL

12

Single Unit

0.23 in (5.8 mm)

20.8 lbs/kft (31 kg/km)

760004358

5201 024A WPYL

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

760018630

5301 024A WPYL

24

Multi-unit

0.52 in (13.1 mm)

108.1 lbs/kft (161 kg/km)

760004366

5301 036A WPYL

36

Multi-unit

0.54 in (13.7 mm)

128.4 lbs/kft (191 kg/km)

760004374

5301 048A WPYL

48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

760004382

5301 072A WPYL

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760004390

5301 096A WPYL

96

Multi-unit

0.90 in (23.0 mm)

360.8 lbs/kft (537 kg/km)

760018051

5301 144A WPYL

144

Multi-unit

0.95 in (24.1 mm)

330.8 lbs/kft (492 kg/km)

760018895

119

TeraSPEED

TS Riser

TeraSPEED

Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5200 002A WRYL

0.16 in (4.1 mm)

8.6 lbs/kft (12.9 kg/km)

760004408

Single Unit

5200 004A WRYL

Single Unit

0.19 in (4.8 mm)

13.1 lbs/kft (19 kg/km)

760004416

5200 006A WRYL

Single Unit

0.20 in (5.1 mm)

15.2 lbs/kft (23 kg/km)

760004424

5200 008A WRYL

Single Unit

0.22 in (5.5 mm)

17.2 lbs/kft (26 kg/km)

760004432

5200 012A WRYL

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

760004440

5200 024A WRYL

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

760018515

5300 024A WRYL

24

Multi-unit

0.56 in (14.1 mm)

106.7 lbs/kft (159 kg/km)

760004457

5300 036A WRYL

36

Multi-unit

0.58 in (14.6 mm)

112.4 lbs/kft (167 kg/km)

760004465

5300 048A WRYL

48

Multi-unit

0.63 in (16.1 mm)

142.8 lbs/kft (212 kg/km)

760004473

5300 072A WRYL

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

760004481

5300 144A WRYL

144

Multi-unit

1.03 in (26.1 mm)

350.5 lbs/kft (522 kg/km)

760018887

Outside Diameter

Weight

Material ID

TS LSZH
Product Number

Fiber Count Construction Type

5202 006A WHYL

Single Unit

0.20 in (5.2 mm)

16.4 lbs/kft (24 kg/km)

760004242

5202 008A WHYL

Single Unit

0.22 in (5.5 mm)

19.1 lbs/kft (28 kg/km)

760004259

5202 012A WHYL

12

Single Unit

0.24 in (6.1 mm)

23.0 lbs/kft (34 kg/km)

760004267

5302 024A WHYL

24

Multi-unit

0.56 in (14.2 mm)

116.6 lbs/kft (174 kg/km)

760004275

5302 036A WHYL

36

Multi-unit

0.59 in (14.9 mm)

118.5 lbs/kft (176 kg/km)

760004283

5302 048A WHYL

48

Multi-unit

0.65 in (16.4 mm)

150.3 lbs/kft (224 kg/km)

760004291

5302 072A WHYL

72

Multi-unit

0.79 in (20.2 mm)

242.2 lbs/kft (360 kg/km)

760004309

120

TeraSPEED Singlemode
Armored Cable
SYSTIMAX Interlocking Armored Fiber Optic Cable provides superior
protection and space savings. It provides installation protection from
bending and excessive pull tension, significant time and labor
reductions versus conduit or interduct installations and increased
installation and design flexibility.
SYSTIMAX interlocking armor can be used anywhere additional
protection and security for the fiber cable is desired. Applications include
building backbone, zone distribution, raised floor, data centers and storage area networks (SANs). Vertical markets
include: industrial, manufacturing, airports, stadiums, military and any other vertical where increased protection and security for
the fiber cable is desired. These include: financial, hospitals, educational facilities and many more.
The SYSTIMAX interlocking armor is applied spirally around any premise distribution cable, and is available in either steel or
aluminum. The armored cable is then over-jacketed with a sheath. This sheath is color-coded to the fiber type contained within,
and provides not only the ability to print the armor with all relevant information on the cable inside, but also allows for easier
handling and pulling.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Operating Temperature: -4F to 158F (-20 to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0 to 70C)
Storage Temperature: -40F to 158F (-40 to 70C)
Crush Resistance: 57.3 lbf/in (10 N/mm) (Test Method: FOTP 41)
Impact Resistance: 4.34 lbf-ft (5.8 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 100 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 8.3 micron ( 9 micron mode field diameter)

Fibers are identified with standard color coding.

TS Steel Armored, Plenum

Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5201 002A WPYL SPYL

Single Unit

0.56 in (14.1 mm)

157 lbs/kft (233 kg/km)

760004317-SPYL

5201 004A WPYL SPYL

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

760004325-SPYL

5201 006A WPYL SPYL

Single Unit

0.56 in (14.1 mm)

163 lbs/kft (243 kg/km)

760004333-SPYL

5201 008A WPYL SPYL

Single Unit

0.56 in (14.1 mm)

165 lbs/kft (245 kg/km)

760004341-SPYL

5201 012A WPYL SPYL

12

Single Unit

0.56 in (14.1 mm)

169 lbs/kft (251 kg/km)

760004358-SPYL

5201 024A WPYL SPYL

24

Single Unit

0.66 in (16.6 mm)

231 lbs/kft (344 kg/km)

760018630-SPYL

5301 024A WPYL SPYL

24

Multi-unit

0.86 in (21.7 mm)

364 lbs/kft (542 kg/km)

760004366-SPYL

5301 036A WPYL SPYL

36

Multi-unit

0.86 in (21.7 mm)

384 lbs/kft (572 kg/km)

760004374-SPYL

5301 048A WPYL SPYL

48

Multi-unit

0.91 in (23.0 mm)

412 lbs/kft (613 kg/km)

760004382-SPYL

5301 072A WPYL SPYL

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

760004390-SPYL

5301 096A WPYL SPYL

96

Multi-unit

1.26 in (31.9 mm)

730 lbs/kft (1087 kg/km)

760018051-SPYL

5301 144A WPYL SPYL

144

Multi-unit

1.26 in (31.9 mm)

700 lbs/kft (1042 kg/km)

760018895-SPYL

121

TeraSPEED

TS Steel Armored, Riser

TeraSPEED

Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5200 002A WRYL SRYL

Single Unit

0.56 in (14.1 mm)

149 lbs/kft (222 kg/km)

760004408-SRYL

5200 004A WRYL SRYL

Single Unit

0.56 in (14.1 mm)

154 lbs/kft (229 kg/km)

760004416-SRYL

5200 006A WRYL SRYL

Single Unit

0.56 in (14.1 mm)

156 lbs/kft (232 kg/km)

760004424-SRYL

5200 008A WRYL SRYL

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

760004432-SRYL

5200 012A WRYL SRYL

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

760004440-SRYL

5200 024A WRYL SRYL

24

Single Unit

0.66 in (16.6 mm)

213 lbs/kft (317 kg/km)

760018515-SRYL

5300 024A WRYL SRYL

24

Multi-unit

0.91 in (23.0 mm)

368 lbs/kft (548 kg/km)

760004457-SRYL

5300 036A WRYL SRYL

36

Multi-unit

0.91 in (23.0 mm)

374 lbs/kft (557 kg/km)

760004465-SRYL

5300 048A WRYL SRYL

48

Multi-unit

0.91 in (23.0 mm)

400 lbs/kft (595 kg/km)

760004473-SRYL

5300 072A WRYL SRYL

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

760004481-SRYL

5300 096A WRYL SRYL

96

Multi-unit

1.26 in (31.9 mm)

689 lbs/kft (1026 kg/km)

760026823-SRYL

5300 144A WRYL SRYL

144

Multi-unit

1.36 in (34.4 mm)

734 lbs/kft (1093 kg/km)

760018887-SRYL

TS Steel Armored, LSZH

Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5202 006A WHYL SHYL

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

760004242-SHYL

5202 008A WHYL SHYL

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (242 kg/km)

760004259-SHYL

5202 012A WHYL SHYL

12

Single Unit

0.56 in (14.1 mm)

166 lbs/kft (248 kg/km)

760004267-SHYL

5202 024A WHYL SHYL

24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km)

760019075-SHYL

5302 024A WHYL SHYL

24

Multi-unit

0.91 in (23.0 mm)

383 lbs/kft (570 kg/km)

760004275-SHYL

5302 036A WHYL SHYL

36

Multi-unit

0.91 in (23.0 mm)

385 lbs/kft (573 kg/km)

760004283-SHYL

5302 048A WHYL SHYL

48

Multi-unit

0.96 in (24.3 mm)

412 lbs/kft (614 kg/km)

760004291-SHYL

5302 072A WHYL SHYL

72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

760004309-SHYL

TS Aluminum Armored, Plenum

Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5201 002A WPYL APYL

Single Unit

0.56 in (14.1 mm)

100 lbs/kft (148 kg/km)

760004317-APYL

5201 004A WPYL APYL

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (154 kg/km)

760004325-APYL

5201 006A WPYL APYL

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (158 kg/km)

760004333-APYL

5201 008A WPYL APYL

Single Unit

0.56 in (14.1 mm)

108 lbs/kft (160 kg/km)

760004341-APYL

5201 012A WPYL APYL

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

760004358-APYL

5201 024A WPYL APYL

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

760018630-APYL

5301 024A WPYL APYL

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

760004366-APYL

5301 036A WPYL APYL

36

Multi-unit

0.86 in (21.7 mm)

282 lbs/kft (420 kg/km)

760004374-APYL

5301 048A WPYL APYL

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

760004382-APYL

5301 072A WPYL APYL

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

760004390-APYL

5301 096A WPYL APYL

96

Multi-unit

1.26 in (31.9 mm)

569 lbs/kft (847 kg/km)

760018051-APYL

5301 144A WPYL APYL

144

Multi-unit

1.26 in (31.9 mm)

539 lbs/kft (802 kg/km)

760018895-APYL

122

TS Aluminum Armored, Riser

Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5200 002A WRYL ARYL

Single Unit

0.56 in (14.1 mm)

92 lbs/kft (137 kg/km)

760004408-ARYL

5200 004A WRYL ARYL

Single Unit

0.56 in (14.1 mm)

97 lbs/kft (144 kg/km)

760004416-ARYL

5200 006A WRYL ARYL

Single Unit

0.56 in (14.1 mm)

99 lbs/kft (147 kg/km)

760004424-ARYL

5200 008A WRYL ARYL

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

760004432-ARYL

5200 012A WRYL ARYL

12

Single Unit

0.56 in (14.1 mm)

105 lbs/kft (157 kg/km)

760004440-ARYL

5200 024A WRYL ARYL

24

Single Unit

0.66 in (16.6 mm)

141 lbs/kft (210 kg/km)

760018515-ARYL

5300 024A WRYL ARYL

24

Multi-unit

0.91 in (23.0 mm)

258 lbs/kft (385 kg/km)

760004457-ARYL

5300 036A WRYL ARYL

36

Multi-unit

0.91 in (23.0 mm)

264 lbs/kft (393 kg/km)

760004465-ARYL

5300 048A WRYL ARYL

48

Multi-unit

0.96 in (24.3 mm)

283 lbs/kft (422 kg/km)

760004473-ARYL

5300 072A WRYL ARYL

72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km)

760004481-ARYL

5300 096A WRYL ARYL

96

Multi-unit

1.26 in (31.9 mm)

528 lbs/kft (786 kg/km)

760026823-ARYL

5300 144A WRYL ARYL

144

Multi-unit

1.36 in (34.4 mm)

558 lbs/kft (830 kg/km)

760018887-ARYL

TS Aluminum Armored, LSZH

Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5202 006A WHYL AHYL

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (153 kg/km)

760004242-AHYL

5202 008A WHYL AHYL

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (157 kg/km)

760004259-AHYL

5202 012A WHYL AHYL

12

Single Unit

0.56 in (14.1 mm)

109 lbs/kft (163 kg/km)

760004267-AHYL

5202 024A WHYL AHYL

24

Single Unit

0.66 in (16.6 mm)

151 lbs/kft (224 kg/km)

760019075-AHYL

5302 024A WHYL AHYL

24

Multi-unit

0.91 in (23.0 mm)

273 lbs/kft (406 kg/km)

760004275-AHYL

5302 036A WHYL AHYL

36

Multi-unit

0.91 in (23.0 mm)

275 lbs/kft (409 kg/km)

760004283-AHYL

5302 048A WHYL AHYL

48

Multi-unit

0.96 in (24.3 mm)

296 lbs/kft (440 kg/km)

760004291-AHYL

5302 072A WHYL AHYL

72

Multi-unit

1.11 in (28.1 mm)

414 lbs/kft (616 kg/km)

760004309-AHYL

123

TeraSPEED

TeraSPEED
Singlemode Outdoor
Loose Tube Cable
The TeraSPEED Loose Tube cable is constructed with industry standard
3 mm gel-filled buffer tubes, stranded around a central strength member.
The buffer tubes are compatible with standard hardware, cable routing
and fan-out kits. The cable core is water blocked with dry water-blocking
materials, making access and handling of individual tubes easier and
craft-friendly. The metallic version is armored with a corrugated polymer
coated steel tape.
These cables are designed for point-to-point applications as well as mid-span
access, and provide a high-level of protection for fiber installed in the outside plant environment.

Environmental and Mechanical Specifications:

TeraSPEED

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 8.3 micron ( 9 micron mode field diameter)

Buffer tubes and fibers are identified with standard color coding.

TS Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5024 004A WXBK

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002576

5024 006A WXBK

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002584

5024 012A WXBK

12

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002592

5024 018A WXBK

18

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002600

5024 024A WXBK

24

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002618

5024 036A WXBK

36

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002626

5024 048A WXBK

48

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002634

5024 072A WXBK

72

0.49 in (12.6 mm)

74 lbs/kft (110 kg/km)

760002642

5024 096A WXBK

96

0.57 in (14.6 mm)

97 lbs/kft (145 kg/km)

760002659

5024 144A WXBK

144

0.74 in (18.8 mm)

148 lbs/kft (220 kg/km)

760002667

5024 288A WXBK

288

0.86 in (21.8 mm)

192 lbs/kft (286 kg/km)

760002675

124

TS Metallic
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5023 004A WXBK

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002253

5023 006A WXBK

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002261

5023 012A WXBK

12

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002279

5023 016A WXBK

16

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760017939

5023 018A WXBK

18

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002287

5023 024A WXBK

24

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002295

5023 032A WXBK

32

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760017947

5023 036A WXBK

36

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002303

5023 048A WXBK

48

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002311

5023 072A WXBK

72

0.55 in (14.0 mm)

119 lbs/kft (177 kg/km)

760002329

5023 096A WXBK

96

0.63 in (16.1 mm)

148 lbs/kft (220 kg/km)

760002337

5023 128A WXBK

128

0.80 in (20.3 mm)

214 lbs/kft (319 kg/km)

760017954

5023 144A WXBK

144

0.80 in (20.3 mm)

214 lbs/kft (319 kg/km)

760002345

5023 288A WXBK

288

0.91 in (23.3 mm)

267 lbs/kft (398 kg/km)

760002352

125

TeraSPEED

TeraSPEED
Singlemode Outdoor
Central Tube Cable
The TeraSPEED central tube, fiber optic cable consists of a core of
colored match clad optical fibers inside a gel-filled polybutylene
terephthalate (PBT) central tube. On opposite sides of the core tube
are two longitudinal, rigid, strength members (Dielectric or Metallic)
that run along the cable length. Additional flexible strength
members are placed radially flanking each rigid strength member.
This construction is then covered with a medium density polyethylene
(MDPE) outer jacket with polyester ripcords underneath. The product
complies with the requirements of Telcordia Generic Requirements for Optical Fiber.

Environmental and Mechanical Specifications:

TeraSPEED

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 8.3 micron ( 9 micron mode field diameter)

Buffer tubes and fibers are identified with standard color coding.

TS Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5022 004A WXBK

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760004002

5022 006A WXBK

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760004010

5022 008A WXBK

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760004028

5022 012A WXBK

12

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760004036

5022 016A WXBK

16

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760027789

5022 024A WXBK

24

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760004044

5022 036A WXBK

36

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760004051

5022 048A WXBK

48

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760004069

5022 072A WXBK

72

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

760004077

5022 096A WXBK

96

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

760004085

126

TS Metallic
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5021 004A WXBK

0.43 in (11.0 mm)

92 lbs/kft (137 kg/km)

760003913

5021 006A WXBK

0.43 in (11.0 mm)

92 lbs/kft (137 kg/km)

760003921

5021 008A WXBK

0.43 in (11.0 mm)

92 lbs/kft (137 kg/km)

760003939

5021 012A WXBK

12

0.43 in (11.0 mm)

92 lbs/kft (137 kg/km)

760003947

5021 024A WXBK

24

0.43 in (11.0 mm)

92 lbs/kft (137 kg/km)

760003954

5021 036A WXBK

36

0.51 in (13.0 mm)

120 lbs/kft (179 kg/km)

760003962

5021 048A WXBK

48

0.51 in (13.0 mm)

120 lbs/kft (179 kg/km)

760003970

5021 072A WXBK

72

0.59 in (15.0 mm)

151 lbs/kft (225 kg/km)

760003988

5021 096A WXBK

96

0.59 in (15.0 mm)

151 lbs/kft (225 kg/km)

760003996

127

TeraSPEED

TeraSPEED Singlemode
Indoor/Outdoor
Loose Tube Cable
The Plenum-Rated and Riser-Rated Indoor/Outdoor Stranded Loose
Tube Dielectric Cable allows for connectivity ease and superior
mid-span accessibility. The cable is designed to endure the rigors
of outdoor use, but can also be run directly in plenum airspace or
riser to eliminate a splice point at the building entrance. The basic
construction utilizes standard 3.0 mm gel-filled (5124 Series) or
dry-block (5125 Series) buffer tubes which contain up to 12 optical
fibers, buffer tubes are stranded around a rigid fiberglass central strength member for protection against
thermal expansion and contraction at operational temperature extremes.
A fluoropolymer thermoplastic material is used for the outer jacket and buffer tubes to provide excellent petrochemical resistance,
flame propagation, and smoke generation properties that exceeds any similar cable design on the market today. These cables are
designed for installation loads up to 600 lbs (2,700 N) and long term loads up to 180 lbs (800 N).
TeraSPEED

All cables meet the mechanical and environmental requirements of Telcordia GR-20-CORE Issue 2 Generic Requirements for
Optical Fiber and Optical Fiber Cable and ANSI/ICEA S-87-640 Standard for Optical Fiber Outside Plan Communications Cable.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Cable Jacket: UV Stabilized Black

Core Size: 8.3 micron ( 9 micron mode field diameter)
Buffer tubes and fibers are identified with standard color
coding.

TS Plenum
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5125 006A WPBK

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016550

5125 012A WPBK

12

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016568

5125 024A WPBK

24

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016576

5125 036A WPBK

36

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016584

5125 048A WPBK

48

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760012229

5125 072A WPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760012393

TS Riser
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5124 006A WRBK

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760004093

5124 012A WRBK

12

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760004101

5124 024A WRBK

24

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760004119

5124 036A WRBK

36

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760004127

5124 048A WRBK

48

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760004135

5124 072A WRBK

72

0.53 in (13.6 mm)

115 lbs/kft (172 kg/km)

760004143

5124 096A WRBK

96

0.62 in (15.7 mm)

152 lbs/kft (226 kg/km)

760004150

5124 144A WRBK

144

0.78 in (19.8 mm)

239 lbs/kft (357 kg/km)

760004168

5124 288A WRBK

288

0.92 in (23.4 mm)

298 lbs/kft (445 kg/km)

760004176

128

TeraSPEED Singlemode
Indoor/Outdoor Tight
Buffered Cable
The indoor/outdoor distribution cable provides network
performance for the applications of today and tomorrow that can
be used in non-traditional building entrance facilities.

Features and Benefits:

900 micron tight buffered construction allows for direct
termination eliminating the need for furcation which
minimizes installation expense
Utilizes water blocking technology which makes the cable
suitable for the outside plant environment, with gel-free cable access
Black, UV stabilized jacket is resistant to chemical, moisture, abrasion and sunlight and does not require additional
protection in most installations
All-dielectric construction eliminates the need for bonding and grounding
Tested and qualified to GR-409 with GR-20, environmental limits and; ICEA-696 and ICEA-640 environmental limits.
Meets requirements for tight buffered constructions and suitable of installation in true OSP environmental conditions
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 158F (-30C to 70C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: Exceeds 126 lbf/in (22 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds 4.34 lbf-ft (5.88 N/m) (Test Method: FOTP 25)
Flexing: Exceeds 100 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 8.3 micron ( 9 micron mode field diameter)

Cable Jacket: UV Stabilized Black
Fibers are identified with standard color coding.

TS Plenum
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5101 002A WPBK

Single Unit

0.17 in (4.2 mm)

10.7 lbs/kft (16 kg/km)

760037168

5101 004A WPBK

Single Unit

0.19 in (4.8 mm)

15.3 lbs/kft (23 kg/km)

760037176

5101 006A WPBK

Single Unit

0.20 in (5.1 mm)

18.7 lbs/kft (28 kg/km)

760036384

5101 006A WPBK

Single Unit

0.20 in (5.1 mm)

18.7 lbs/kft (28 kg/km)

760038372

5101 008A WPBK

Single Unit

0.23 in (5.8 mm)

25.0 lbs/kft (37 kg/km)

760037184

5101 012A WPBK

12

Single Unit

0.27 in (6.9 mm)

36.0 lbs/kft (54 kg/km)

760037192

5101 018A WPBK

18

Single Unit

0.28 in (7.1 mm)

32.2 lbs/kft (48 kg/km)

760037200

5101 024A WPBK

24

Single Unit

0.31 in (7.9 mm)

41.1 lbs/kft (62 kg/km)

760037218

5104 036A WPBK

36

Multi-unit

0.67 in (17.1 mm)

174 lbs/kft (259 kg/km)

760037895

5104 048A WPBK

48

Multi-unit

0.74 in (18.9 mm)

222 lbs/kft (330 kg/km)

760037903

5104 060A WPBK

60

Multi-unit

0.85 in (21.5 mm)

287 lbs/kft (427 kg/km)

760037911

5104 072A WPBK

72

Multi-unit

0.93 in (23.7 mm)

357 lbs/kft (532 kg/km)

760037929

5104 096A WPBK

96

Multi-unit

1.11 in (28.2 mm)

542 lbs/kft (806 kg/km)

760037937

5104 144A WPBK

144

Multi-unit

1.19 in (30.3 mm)

558 lbs/kft (831 kg/km)

760037945

129

TeraSPEED

TS Riser
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5100 006A WRBK

Single Unit

0.22 in (5.5 mm)

18 lbs/kft (26 kg/km)

760009753

5100 012A WRBK

12

Single Unit

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

760004184

5103 024A WRBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

760004192

5103 036A WRBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

760004200

TS LSZH
TeraSPEED

Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5102 006A WHBK

Single Unit

0.22 in (5.5 mm)

18 lbs/kft (26 kg/km)

760011049

5102 012A WHBK

12

Single Unit

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

760004218

5105 024A WHBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

760004226

5105 036A WHBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

760004234

130

TeraSPEED Singlemode
Fiber Optic Patch
Cords and Pigtails
The TeraSPEED fiber patch cord family supports the enhanced
high-performance system level requirements designed into the
TeraSPEED Zero Water Peak singlemode (ZWP-SM) cabling solution.
The TeraSPEED family of fiber patch cords is configurable with
standard LC, SC, and ST terminations, and is available in either
1.6 mm or 3.0 mm simplex or zipcord.
TeraSPEED fiber patch cords are offered in riser, plenum, and
low smoke zero halogen (LSZH) options. Using our Fiber
Patch Cord Product Identifier (in Fiber Reference section), fiber patch cord can be ordered with
custom configured cordage size, jacket type, and length in either feet or meters, providing the ultimate in flexibility to meet any
cabling infrastructure design. LSZH fiber patch cords are available for International region only.

Features and Benefits:

60% increase in usable bandwidth with TeraSPEED zero water peak singlemode
Support for a wide variety of applications, including CWD
Available 1.6 mm cordage makes these the smallest cords in the industry
Double the density in panels/shelves/outlets, when configured with the LC connector
Pull proof connector designs prevent unintended disconnect
Distinctive color-coding for positive identification

Physical Specifications:

TeraSPEED

Optical Specifications:

1.6 mm and 3.0 mm Patch Cords

Outside Diameter (simplex):
1.6 mm: 1.6 mm
3.0 mm: 3.0 mm
Outside Diameter (zip cord):
1.6 mm: 1.6 mm x 3.3 mm
3.0 mm: 3.0 mm x 5.9 mm
Minimum Cable Retention Strength:
1.6 mm: 11.24 lbs (50 N)
3.0 mm: 11.24 lbs (50 N)
Minimum Bend Radius:
1.6 mm: Loaded: 2.0 in (5.1 cm)
Unloaded: 1.4 in (3.5 cm)
3.0 mm: Loaded: 2.3 in (5.8 cm)
Unloaded: 1.4 in (3.5 cm)
Maximum Cordage Tensile Load:
1.6 mm: Short Term: 70 lbs (311 N)
Long Term: 21 lbs (93 N)
3.0 mm: Short Term: 90 lbs (400 N)
Long Term: 27 lbs (120 N)

Fiber Type: TeraSPEED ZWP-SM

Max. Attenuation:
0.70 dB/km @ 1,310 nm
0.70 dB/km @ 1,383 nm
0.70 dB/km @ 1,550 nm

Pigtails
Detailed Description

Fire Rating

Fiber Count

Length

TeraSPEED LC / UC 0.9 mm Pigtail, Ruggedized

Riser

Configurable

FPCWLCUC11-R

TeraSPEED SC / UC 0.9 mm Pigtail, Ruggedized

Riser

Configurable

FPCWSCUC11-R

TeraSPEED STII+ / UC 0.9 mm Pigtail, Ruggedized

Riser

Configurable

FPCWEPUC11-R

TeraSPEED LC / UC 0.9 mm Pigtail, Tight Buffered Fiber

Riser

Configurable

FPCWLCUC01-R

TeraSPEED SC / UC 0.9 mm Pigtail, Tight Buffered Fiber

Riser

Configurable

FPCWSCUC01-R

TeraSPEED STII+ / UC 0.9 mm Pigtail, Tight Buffered Fiber

Riser

Configurable

FPCWEPUC01-R

131

FPC Code

1.6 mm Patch Cords

TeraSPEED

Detailed Description

Fire Rating

Fiber Count

Length

FPC Code

TeraSPEED LC / LC 1.6 mm Duplex

Riser

Configurable

FPCWLCLC22-R

TeraSPEED LC / LC 1.6 mm Simplex

Riser

Configurable

FPCWLCLC21-R

TeraSPEED LC / SC 1.6 mm Duplex

Riser

Configurable

FPCWLCSC22-R

TeraSPEED LC / STII+ 1.6 mm Duplex

Riser

Configurable

FPCWLCEP22-R

TeraSPEED LC / STII+ 1.6 mm Simplex

Riser

Configurable

FPCWLCEP21-R

TeraSPEED SC / SC 1.6 mm Duplex

Riser

Configurable

FPCWSCSC22-R

TeraSPEED SC / SC 1.6 mm Simplex

Riser

Configurable

FPCWSCSC21-R

TeraSPEED SC / STII+ 1.6 mm Duplex

Riser

Configurable

FPCWSCEP22-R

TeraSPEED SC / STII+ 1.6 mm Simplex

Riser

Configurable

FPCWSCEP21-R

TeraSPEED LC / LC 1.6 mm Duplex

LSZH*

Configurable

FPCWLCLC22-H

TeraSPEED SC / SC 1.6 mm Duplex

LSZH*

Configurable

FPCWSCSC22-H

TeraSPEED SC / SC 1.6 mm Duplex

LSZH*

Configurable

FPCWLCSC22-H

Detailed Description

Fire Rating

Fiber Count

Length

FPC Code

TeraSPEED SC / SC 3.0 mm Duplex

Riser

Configurable

FPCWSCSC32-R

TeraSPEED SC / SC 3.0 mm Simplex

Riser

Configurable

FPCWSCSC31-R

TeraSPEED SC / STII+ 3.0 mm Duplex

Riser

Configurable

FPCWSCEP32-R

TeraSPEED SC / STII+ 3.0 mm Simplex

Riser

Configurable

FPCWSCEP31-R

TeraSPEED STII+ / STII 3.0 mm Duplex

Riser

Configurable

FPCWEPEP32-R

TeraSPEED STII+ / STII 3.0 mm Simplex

Riser

Configurable

FPCWEPEP31-R

TeraSPEED LC-LC 3.0 mm Simplex

Plenum

Configurable

FPCWLCLC31-P

TeraSPEED LC-LC 3.0 mm Duplex

Plenum

Configurable

FPCWLCLC32-P

TeraSPEED SC-SC 3.0 mm Simplex

Plenum

Configurable

FPCWSCSC31-P

TeraSPEED SC-SC 3.0 mm Duplex

Plenum

Configurable

FPCWSCSC32-P

TeraSPEED STII -STII 3.0 mm Simplex

Plenum

Configurable

FPCWSTST31-P

TeraSPEED STII -STII 3.0 mm Duplex

Plenum

Configurable

FPCWSTST32-P

TeraSPEED LC-STII 3.0 mm Simplex

Plenum

Configurable

FPCWLCST31-P

TeraSPEED LC-STII 3.0 mm Duplex

Plenum

Configurable

FPCWLCST32-P

TeraSPEED LC-SC 3.0 mm Simplex

Plenum

Configurable

FPCWLCSC31-P

TeraSPEED LC-SC 3.0 mm Duplex

Plenum

Configurable

FPCWLCSC32-P

TeraSPEED SC-STII 3.0 mm Simplex

Plenum

Configurable

FPCWSCST31-P

TeraSPEED SC-STII 3.0 mm Duplex

Plenum

Configurable

FPCWSCST32-P

TeraSPEED SC / SC 3.0 mm Duplex

LSZH*

Configurable

FPCWSCSC32-H

TeraSPEED LC-STII 3.0 mm Duplex

LSZH*

Configurable

FPCWSTST32-H

TeraSPEED SC-STII 3.0 mm Duplex

LSZH*

Configurable

FPCWSCST32-H

TeraSPEED LC-STII 3.0 mm Duplex

LSZH*

Configurable

FPCWLCST32-H

3.0 mm Patch Cords

* LSZH fiber optic patch cords are offered in international only.

Hybrid MTRJ fiber patch cords are also available. Please refer to the Fiber Patch Cord Product Identifier for ordering information.

132

OptiSPEED Solution
Multimode
1 Fiber optic LIU/489 FIU
2 Racks and cabinets

3 Equipment room:
-600 G2 modular shelf and panel shelf
-1000 G2 modular shelf and panel shelf
4 Telecom closet:
-600 G2 modular shelf and panel shelf
-1000 G2 modular shelf and panel shelf

5 Faceplate/multimedia information outlet

OptiSPEED outside plant cable
OptiSPEED indoor/outdoor cable
OptiSPEED indoor cable
OptiSPEED patch cord
1

OptiSPEED riser cable

2
3

OptiSPEED Solution

Features and Benefits:

Standard multimode fiber
Lowest multimode fiber channel loss available, up to 50% less than other systems
Lowest loss small form factor connector available in the industry - LC connector
SYSTIMAX OptiSPEED Solution was developed to provide a fiber optic solution that is the backbone for todays performance
requirements. 62.5 micron multimode fiber provides high speed links to support signal transmission up to the TIA standard of 300
meters within a building and up to 2,000 meters or 2 kilometers within a campus for many of todays legacy LANs.
The OptiSPEED channel, including the low loss LC connector, supports the 1000BASE-SX Gbps ethernet LAN, up to 300 meters
with 6 LC connections. OptiSPEED Solution supports up to 600 meter for 1000BASE-LX, Gbps ethernet LAN applications. In
addition, OptiSPEED Solution supports 10 Gbps ethernet using CWDM 1,300 nm lasers to 300 meters.
In addition to LC connectors, OptiSPEED Solution supports the duplex SC connector as well as the ST II+ connector although over
restricted applications and number of connections. The LC is a small form factor connector that allows two LC connectors to
fit in the space of a traditional connector such as the SC or ST II+. An extensive line of wall and rack mounted cabinets and
telecommunication outlets for building entrance facilities, equipment rooms, telephone closets/floor distributors and work areas
are available.
SYSTIMAX channels comprised exclusively of OptiSPEED multimode passive products, end-to-end, are capable of delivering up to
10 Gbps in accordance with application standards.

OptiSPEED products include:

Building Cable
Indoor/Outdoor Cable
Outside Plant Cable (where appropriate for the enterprise market)
LC connectors (SC or ST II+ connectors available for limited applications and connections)
Splice and Termination Shelves
Multimedia Outlets and Boxes
Connectorized Patch Cords

133

OptiSPEED

OptiSPEED Specifications
OptiSPEED Optical Fiber
62.5 Micron, Multimode Fiber

Physical Characteristics

Mechanical Characteristics

Core Diameter

62.5 2.5 m

Proof Test

100 kpsi (0.69 Gpa)

Cladding Diameter

125.0 1.0 m

Coating Strip Force

0.3 - 2.0 lbf (1.3 - 8.9 N)

Core/Clad Offset

1.5 m

Dynamic Fatigue Parameter (nd)

18

Coating Diameter (Uncolored)

245 10 m

Coating Diameter (Colored)

254 7 m

Macrobending, Max. (100 turns @

75 mm mandrel)

0.50 dB max. @ 850 nm

and 1,300 nm

Coating/Cladding Concentricity Error, Max. 6 m

Clad Non-Circularity

1%

OptiSPEED

Optical Characteristics, Wavelength Specific

850 nm

1,300 nm

Max. Attenuation, Loose Tube Cable

3.0 dB/km

1.0 dB/km

Max. Attenuation, Tight Buffer Cable

3.4 dB/km

1.0 dB/km

Bandwidth, OFL

200 MHz-km

500 MHz-km

Group Refractive Index

1.496

1.491

1 Gb Ethernet Distance

300 m

550 m

Optical Characteristics, General

Environmental Characteristics

Numerical Aperature

0.275 0.015

Temperature Dependence -76F to 185F (-60C to 85C)

0.20 dB

Point Defects, Max.

0.15 dB

0.20 dB

Zero Dispersion Wavelength

1,320-1,365 nm

Temperature Humidity Cycling 14F to 185F (-10C to 85C)

up to 95% RH

Zero Dispersion Slope

0.097 ps/[km-nm-nm]

Water Immersion, 73.4F (23C)

0.20 dB

Heat Aging, 185F (85C)

0.20 dB

134

OptiSPEED Multimode
Building Cables
Designed and engineered for fiber-to-the-desk workstation applications, providing premise distribution systems with one cable that
directly connects the building entrance splice to the users desk-top
equipment in both the horizontal and vertical riser. Consists of 2-12
individual 62.5/125 micron fibers, each with a color-coded buffer for
easy installation. Reinforced with aramid yarn for superior strength.
Contains no metallic elements.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Operating Temperature: -4F to 158F (-20C to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0C to 70C)
Storage Temperature: -40F to 158F (-40C to 70C)
Crush Resistance: 57.3 lbf/in (10 N/mm) (Test Method: FOTP 41)
Impact Resistance: 4.34 lbf-ft (5.8 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 100 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)
OptiSPEED

Physical Specifications:

Core Size: 62.5 micron

Fibers are identified with stardard color coding.

OS Plenum
Product Number

Fiber Count

Construction Type Outside Diameter Weight

Color

Material ID

5201 002A MPSL

Single Unit

0.15 in (3.9 mm)

8.8 lbs/kft (13.1 kg/km)

Slate

700009657

5201 004A MPSL

Single Unit

0.17 in (4.4 mm)

1.22 lbs/kft (18 kg/km)

Slate

700009582

5201 006A MPSL

Single Unit

0.19 in (4.8 mm)

1.51 lbs/kft (22 kg/km)

Slate

700009517

5201 008A MPSL

Single Unit

0.20 in (5.1 mm)

16.8 lbs/kft (25 kg/km)

Slate

700009442

5201 012A MPSL

12

Single Unit

0.23 in (5.8 mm)

20.8 lbs/kft (31 kg/km)

Slate

700009392

5201 018A MPSL

18

Single Unit

0.31 in (7.9 mm)

40.9 lbs/kft (61 kg/km)

Slate

760018648

5201 024A MPSL

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

Slate

760078663

5201 002A MPOR

Single Unit

0.15 in (3.9 mm)

8.8 lbs/kft (13.1 kg/km)

Orange

700009665

5201 004A MPOR

Single Unit

0.17 in (4.4 mm)

12.2 lbs/kft (18 kg/km)

Orange

700009590

5201 006A MPOR

Single Unit

0.19 in (4.8 mm)

15.1 lbs/kft (22 kg/km)

Orange

700009525

5201 012A MPOR

12

Single Unit

0.23 in (5.8 mm)

20.8 lbs/kft (31 kg/km)

Orange

700009400

5201 024A MPOR

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

Orange

760018655

5201 004A MPRD

Single Unit

0.17 in (4.4 mm)

12.2 lbs/kft (18 kg/km)

Red

760025478

5301 018A MPSL

18

Multi-unit

0.45 in (11.4 mm)

82.5 lbs/kft (123 kg/km)

Slate

700009319

5301 024A MPSL

24

Multi-unit

0.52 in (13.1 mm)

108.1 lbs/kft (161 kg/km)

Slate

700009277

5301 036A MPSL

36

Multi-unit

0.54 in (13.7 mm)

128.4 lbs/kft (191 kg/km)

Slate

700009186

5301 048A MPSL

48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

Slate

700009095

5301 072A MPSL

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

Slate

700009004

5301 144A MPSL

144

Multi-unit

0.95 in (24.1 mm)

330.8 lbs/kft (492 kg/km)

Slate

760032821

5301 024A MPOR

24

Multi-unit

0.52 in (13.1 mm)

108.1 lbs/kft (161 kg/km)

Orange

700009285

135

OS Riser

OptiSPEED

Product Number

Fiber Count

Construction Type Outside Diameter Weight

Color

Material ID

5200 002A MRSL

Single Unit

0.16 in (4.6 mm)

8.6 lbs/kft (12.9 kg/km)

Slate

700009640

5200 004A MRSL

Single Unit

0.19 in (4.8 mm)

13.1 lbs/kft (19.4 kg/km)

Slate

700009574

5200 006A MRSL

Single Unit

0.20 in (5.1 mm)

15.2 lbs/kft (23 kg/km)

Slate

700009509

5200 008A MRSL

Single Unit

0.22 in (5.5 mm)

17.2 lbs/kft (26 kg/km)

Slate

700009434

5200 012A MRSL

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

Slate

700009384

5200 018A MRSL

18

Single Unit

0.30 in (7.7 mm)

32.1 lbs/kft (48 kg/km)

Slate

760018523

5200 024A MRSL

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

Slate

760018531

5200 002A MROR

Single Unit

0.16 in (4.1 mm)

8.6 lbs/kft (12.9 kg/km)

Orange

700010184

5200 004A MROR

Single Unit

0.19 in (4.8 mm)

13.1 lbs/kft (19.4 kg/km)

Orange

700012172

5200 006A MROR

Single Unit

0.20 in (5.1 mm)

15.2 lbs/kft (23 kg/km)

Orange

700010176

5200 008A MROR

Single Unit

0.22 in (5.5 mm)

17.2 lbs/kft (26 kg/km)

Orange

700012180

5200 012A MROR

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

Orange

700010168

5300 018A MRSL

18

Multi-unit

0.48 in (12.3 mm)

99.8 lbs/kft (148 kg/km)

Slate

700009301

5300 024A MRSL

24

Multi-unit

0.56 in (14.1 mm)

106.7 lbs/kft (159 kg/km)

Slate

700009269

5300 036A MRSL

36

Multi-unit

0.58 in (14.6 mm)

112.4 lbs/kft (167 kg/km)

Slate

700009178

5300 048A MRSL

48

Multi-unit

0.63 in (16.1 mm)

142.8 lbs/kft (212 kg/km)

Slate

700009087

5300 072A MRSL

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

Slate

700008998

OS LSZH
Product Number

Fiber Count

Construction Type Outside Diameter Weight

Color

Material ID

5202 002A MHOR

Single Unit

0.15 in (3.9 mm)

7.82 lbs/kft (11.6 kg/km)

Orange

700008485

5202 004A MHOR

Single Unit

0.19 in (4.8 mm)

14.3 lbs/kft (21 kg/km)

Orange

700008477

5202 006A MHOR

Single Unit

0.20 in (5.2 mm)

16.4 lbs/kft (24 kg/km)

Orange

700008469

5202 008A MHOR

Single Unit

0.22 in (5.5 mm)

19.1 lbs/kft (28 kg/km)

Orange

700008451

5202 012A MHOR

12

Single Unit

0.24 in (6.1 mm)

23.0 lbs/kft (34 kg/km)

Orange

700008444

5302 024A MHOR

24

Multi-unit

0.56 in (14.2 mm)

116.6 lbs/kft (174 kg/km)

Orange

700009293

5302 036A MHOR

36

Multi-unit

0.59 in (14.9 mm)

118.5 lbs/kft (176 kg/km)

Orange

700009194

5302 048A MHOR

48

Multi-unit

0.65 in (16.4 mm)

150.3 lbs/kft (224 kg/km)

Orange

700009103

5302 072A MHOR

72

Multi-unit

0.79 in (20.2 mm)

242.2 lbs/kft (360 kg/km)

Orange

700009012

136

OptiSPEED Multimode
Armored Cables
SYSTIMAX Interlocking Armored Fiber Optic Cable provides superior
protection and space savings. It provides installation protection from
bending and excessive pull tension, significant time and labor reductions
versus conduit or interduct installations and increased installation and
design flexibility.
SYSTIMAX Interlocking Armor can be used anywhere additional
protection and security for the fiber cable is desired. Applications include
building backbone, zone distribution, raised floor, data centers and storage area networks (SANs). Vertical markets
include: industrial, manufacturing, airports, stadiums, military and any other vertical where increased protection and security for
the fiber cable is desired. These include: financial, hospitals, educational facilities and many more.
The SYSTIMAX Interlocking Armor is applied spirally around any premise distribution cable and is available in either steel or
aluminum. The armored cable is then over jacketed with a sheath. This sheath is color-coded to the fiber type contained within,
and provides not only the ability to print the armor with all relevant information on the cable inside, but also allows for easier
handling and pulling.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

OptiSPEED

Environmental and Mechanical Specifications:

Operating Temperature: -4F to 158F (-20C to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0C to 70C)
Storage Temperature: -40F to 158F (-40C to 70C)
Crush Resistance: 486.8 lbf/in (85 N/mm) (Test Method: FOTP 41)
Impact Resistance: 25.8 lbf-ft (35 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 62.5 micron

Fibers are identified with standard color coding.

OS Steel Armored, Plenum

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Color

Material ID

5201 002A MPOR SPOR

157 lbs/kft (233 kg/km)

Orange

700009665-SPOR

Single Unit

0.56 in (14.1 mm)

5201 002A MPSL SPSL

Single Unit

0.56 in (14.1 mm)

157 lbs/kft (233 kg/km)

Slate

700009657-SPSL

5201 004A MPOR SPOR

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

Orange

700009590-SPOR
700009582-SPSL

5201 004A MPSL SPSL

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

Slate

5201 006A MPOR SPOR

Single Unit

0.56 in (14.1 mm)

163 lbs/kft (243 kg/km)

Orange

700009525-SPOR

5201 006A MPSL SPSL

Single Unit

0.56 in (14.1 mm)

163 lbs/kft (243 kg/km)

Slate

700009517-SPSL

5201 008A MPSL SPSL

Single Unit

0.56 in (14.1 mm)

165 lbs/kft (245 kg/km)

Slate

700009442-SPSL

5201 012A MPSL SPSL

12

Single Unit

0.56 in (14.1 mm)

169 lbs/kft (251 kg/km)

Slate

700009392-SPSL

5201 012A MPOR SPOR

12

Single Unit

0.56 in (14.1 mm)

169 lbs/kft (251 kg/km)

Orange

700009400-SPOR

5201 018A MPSL SPSL

18

Single Unit

0.66 in (16.6 mm)

225 lbs/kft (334 kg/km)

Slate

760018648-SPSL

5201 024A MPOR SPOR

24

Single Unit

0.66 in (16.6 mm)

231 lbs/kft (344 kg/km)

Orange

760018655-SPOR

5201 024A MPSL SPSL

24

Single Unit

0.66 in (16.6 mm)

231 lbs/kft (344 kg/km)

Slate

760018663-SPSL

5201 024A MPSL SPSL

24

Single Unit

0.66 in (16.6 mm)

231 lbs/kft (344 kg/km)

Slate

760078663-SPSL

5301 018A MPSL SPSL

18

Multi-unit

0.76 in (19.2 mm)

302 lbs/kft (450 kg/km)

Slate

700009319-SPSL

5301 024A MPOR SPOR

24

Multi-unit

0.86 in (21.7 mm)

364 lbs/kft (542 kg/km)

Orange

700009285-SPOR

5301 024A MPSL SPSL

24

Multi-unit

0.86 in (21.7 mm)

364 lbs/kft (542 kg/km)

Slate

700009277-SPSL

137

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Color

Material ID

5301 036A MPSL SPSL

36

Multi-unit

0.86 in (21.7 mm)

384 lbs/kft (572 kg/km)

Slate

700009186-SPSL

5301 048A MPSL SPSL

48

Multi-unit

0.91 in (23.0 mm)

412 lbs/kft (613 kg/km)

Slate

700009095-SPSL

5301 072A MPSL SPSL

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

Slate

700009004-SPSL

5301 144A MPSL SPSL

144

Multi-unit

1.26 in (31.9 mm)

700 lbs/kft (1042 kg/km) Slate

760032821-SPSL

OS Steel Armored, Riser

OptiSPEED

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Color

Material ID

5200 002A MROR SROR

Single Unit

0.56 in (14.1 mm)

149 lbs/kft (222 kg/km)

Orange

700010184-SROR

5200 002A MRSL SRSL

Single Unit

0.56 in (14.1 mm)

149 lbs/kft (222 kg/km)

Slate

700009640-SRSL

5200 004A MROR SROR

Single Unit

0.56 in (14.1 mm)

154 lbs/kft (229 kg/km)

Orange

700012172-SROR

5200 004A MRSL SRSL

Single Unit

0.56 in (14.1 mm)

154 lbs/kft (229 kg/km)

Slate

700009574-SRSL

5200 006A MROR SROR

Single Unit

0.56 in (14.1 mm)

156 lbs/kft (232 kg/km)

Orange

700010176-SROR

5200 006A MRSL SRSL

Single Unit

0.56 in (14.1 mm)

156 lbs/kft (232 kg/km)

Slate

700009509-SRSL

5200 008A MROR SROR

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

Orange

700012180-SROR

5200 008A MRSL SRSL

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

Slate

700009434-SRSL

5200 012A MROR SROR

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

Orange

700010168-SROR

5200 012A MRSL SRSL

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

Slate

700009384-SRSL

5200 018A MRSL SRSL

18

Single Unit

0.66 in (16.6 mm)

207 lbs/kft (308 kg/km)

Slate

760018523-SRSL

5200 024A MRSL SRSL

24

Single Unit

0.66 in (16.6 mm)

213 lbs/kft (317 kg/km)

Slate

760018531-SRSL

5300 018A MRSL SRSL

18

Multi-unit

0.81 in (20.4 mm)

327 lbs/kft (486 kg/km)

Slate

700009301-SRSL

5300 024A MRSL SRSL

24

Multi-unit

0.91 in (23.0 mm)

368 lbs/kft (548 kg/km)

Slate

700009269-SRSL

5300 036A MRSL SRSL

36

Multi-unit

0.91 in (23.0 mm)

374 lbs/kft (557 kg/km)

Slate

700009178-SRSL

5300 048A MRSL SRSL

48

Multi-unit

0.96 in (24.3 mm)

400 lbs/kft (595 kg/km)

Slate

700009087-SRSL

5300 072A MRSL SRSL

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

Slate

700008998-SRSL

5300 096A MRSL SRSL

96

Multi-unit

1.26 in (31.9 mm)

689 lbs/kft (1026 kg/km) Slate

760026815-SRSL

OS Steel Armored, LSZH

Product Number

Weight

Color

Material ID

5202 002A MHOR SHOR 2

Fiber Count Construction Type Outside Diameter

Single Unit

0.56 in (14.1 mm)

151 lbs/kft (225 kg/km)

Orange

700008485-SHOR

5202 004A MHOR SHOR 4

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

Orange

700008477-SHOR

5202 006A MHOR SHOR 6

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

Orange

700008469-SHOR

5202 008A MHOR SHOR 8

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (242 kg/km)

Orange

700008451-SHOR

5202 012A MHOR SHOR 12

Single Unit

0.56 in (14.1 mm)

166 lbs/kft (248 kg/km)

Orange

700008444-SHOR

5202 024A MHOR SHOR 24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km)

Orange

760019083-SHOR

5302 024A MHOR SHOR 24

Multi-unit

0.91 in (23.0 mm)

383 lbs/kft (570 kg/km)

Orange

700009293-SHOR

5302 036A MHOR SHOR 36

Multi-unit

0.91 in (23.0 mm)

385 lbs/kft (573 kg/km)

Orange

700009194-SHOR

5302 048A MHOR SHOR 48

Multi-unit

0.96 in (24.3 mm)

412 lbs/kft (614 kg/km)

Orange

700009103-SHOR

5302 072A MHOR SHOR 72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

Orange

700009012-SHOR

138

OS Aluminum Armored, Plenum

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Color

Material ID

5201 002A MPOR APOR

Single Unit

0.56 in (14.1 mm)

100 lbs/kft (148 kg/km)

Orange

700009665-APOR

5201 002A MPSL APSL

Single Unit

0.56 in (14.1 mm)

100 lbs/kft (148 kg/km)

Slate

700009657-APSL

5201 004A MPOR APOR

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (154 kg/km)

Orange

700009590-APOR

5201 004A MPSL APSL

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (154 kg/km)

Slate

700009582-APSL

5201 006A MPOR APOR

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (158 kg/km)

Orange

700009525-APOR

5201 006A MPSL APSL

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (158 kg/km)

Slate

700009517-APSL

5201 008A MPSL APSL

Single Unit

0.56 in (14.1 mm)

108 lbs/kft (160 kg/km)

Slate

700009442-APSL

5201 012A MPSL APSL

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

Slate

700009392-APSL

5201 012A MPOR APOR

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

Orange

700009400-APOR

5201 018A MPSL APSL

18

Single Unit

0.66 in (16.6 mm)

153 lbs/kft (227 kg/km)

Slate

760018648-APSL

5201 018A MPSL APSL

18

Single Unit

0.66 in (16.6 mm)

153 lbs/kft (227 kg/km)

Slate

760018663-APSL

5201 024A MPOR APOR

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

Orange

760018655-APOR

5201 024A MPSL APSL

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

Slate

760078663-APSL

5301 018A MPSL APSL

18

Multi-unit

0.76 in (19.2 mm)

215 lbs/kft (320 kg/km)

Slate

700009319-APSL

5301 024A MPOR APOR

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

Orange

700009285-APOR

5301 024A MPSL APSL

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

Slate

700009277-APSL

5301 036A MPSL APSL

36

Multi-unit

0.86 in (21.7 mm)

282 lbs/kft (420 kg/km)

Slate

700009186-APSL

5301 048A MPSL APSL

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

Slate

700009095-APSL

5301 072A MPSL APSL

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

Slate

700009004-APSL

5301 144A MPSL APSL

144

Multi-unit

1.26 in (31.9 mm)

539 lbs/kft (802 kg/km)

Slate

760032821-APSL

OS Aluminum Armored, Riser

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Color

Material ID

5200 002A MROR AROR

Single Unit

0.56 in (14.1 mm)

92 lbs/kft (137 kg/km)

Orange

700010184-AROR

5200 002A MRSL ARSL

Single Unit

0.56 in (14.1 mm)

92 lbs/kft (137 kg/km)

Slate

700009640-ARSL

5200 004A MROR AROR

Single Unit

0.56 in (14.1 mm)

97 lbs/kft (144 kg/km)

Orange

700012172-AROR

5200 004A MRSL ARSL

Single Unit

0.56 in (14.1 mm)

97 lbs/kft (144 kg/km)

Slate

700009574-ARSL

5200 006A MROR AROR

Single Unit

0.56 in (14.1 mm)

99 lbs/kft (147 kg/km)

Orange

700010176-AROR

5200 006A MRSL ARSL

Single Unit

0.56 in (14.1 mm)

99 lbs/kft (147 kg/km)

Slate

700009509-ARSL

5200 008A MROR AROR

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

Orange

700012180-AROR

5200 008A MRSL ARSL

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

Slate

700009434-ARSL

5200 012A MROR AROR

12

Single Unit

0.56 in (14.1 mm)

105 lbs/kft (157 kg/km)

Orange

700010168-AROR

5200 012A MRSL ARSL

12

Single Unit

0.56 in (14.1 mm)

105 lbs/kft (157 kg/km)

Slate

700009384-ARSL

5200 018A MRSL ARSL

18

Single Unit

0.66 in (16.6 mm)

135 lbs/kft (201 kg/km)

Slate

760018523-ARSL

5200 024A MRSL ARSL

24

Single Unit

0.66 in (16.6 mm)

141 lbs/kft (210 kg/km)

Slate

760018531-ARSL

5300 018A MRSL ARSL

18

Multi-unit

0.81 in (20.4 mm)

232 lbs/kft (345 kg/km)

Slate

700009301-ARSL

5300 024A MRSL ARSL

24

Multi-unit

0.91 in (23.0 mm)

258 lbs/kft (385 kg/km)

Slate

700009269-ARSL

5300 036A MRSL ARSL

36

Multi-unit

0.91 in (23.0 mm)

264 lbs/kft (393 kg/km)

Slate

700009178-ARSL

5300 048A MRSL ARSL

48

Multi-unit

0.96 in (24.3 mm)

283 lbs/kft (422 kg/km)

Slate

700009087-ARSL

5300 072A MRSL ARSL

72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km)

Slate

700008998-ARSL

5300 096A MRSL ARSL

96

Multi-unit

1.26 in (31.9 mm)

528 lbs/kft (786 kg/km)

Slate

760026815-ARSL

139

OptiSPEED

OptiSPEED Multimode
Outdoor Loose
Tube Cable
The OptiSPEED Loose Tube Dielectric cable is constructed with industry
standard 3 mm gel-filled, buffer tubes, stranded around a central
strength member. The buffer tubes are compatible with standard
hardware, cable routing and fan-out kits.
The OptiSPEED Loose Tube Metallic Stranded is armored with a
corrugated, polymer coated steel tape and constructed with industry
standard 3 mm gel-filled, buffer tubes, stranded around a central
strength member. The armor layer provides added crush protection
and meets the Telcordia requirements for superior armored cable. The buffer tubes are
compatible with standard hardware, cable routing and fan-out kits.

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)
OptiSPEED

Physical Specifications:

Core Size: 62.5 micron

Buffer tubes and fibers are identified with standard color coding.

OS Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5024 004A MXBK

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002683

5024 006A MXBK

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002691

5024 012A MXBK

12

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002709

5024 018A MXBK

18

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002717

5024 024A MXBK

24

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002725

5024 036A MXBK

36

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002733

5024 048A MXBK

48

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760002741

5024 072A MXBK

72

0.49 in (12.6 mm)

74 lbs/kft (110 kg/km)

760002758

5024 096A MXBK

96

0.57 in (14.6 mm)

97 lbs/kft (145 kg/km)

760002766

5024 288A MXBK

288

0.86 in (21.8 mm)

192 lbs/kft (286 kg/km)

760002774

140

OS Metallic
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5023 004A MXBK

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002360

5023 006A MXBK

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002378

5023 012A MXBK

12

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002386

5023 018A MXBK

18

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002394

5023 024A MXBK

24

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002402

5023 036A MXBK

36

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002410

5023 048A MXBK

48

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760002428

5023 072A MXBK

72

0.55 in (14.0 mm)

119 lbs/kft (177 kg/km)

760002436

5023 096A MXBK

96

0.63 in (16.1 mm)

148 lbs/kft (220 kg/km)

760002444

5023 288A MXBK

288

0.91 in (23.3 mm)

267 lbs/kft (398 kg/km)

760002451

OptiSPEED Multimode
Outdoor Central Tube
Cable
The OptiSPEED Multimode Outdoor Central Tube Cable is designed
for use in underground conduit, direct buried, or aerial applications.
It has a core containing 4 to 96 multimode 62.5/125 micron fibers,
which are separated into color-coded binder groups surrounded by
a core tube. The core is gel-filled with water-blocking compound.
The dielectric cable's sheath has non-metallic strength members parallel to the core and
outside the core. The metallic cable's sheath has two steel wires placed opposite one another parallel to the core and outside the
core. Steel armor provides protection from rodents and lightning. Sheath jacket material is medium-density Polyethylene (MDPE)
for maximum environmental protection.

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 62.5 micron

Buffer tubes and fibers are identified with standard color coding.

141

OptiSPEED

OS Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5022 004A MXBK

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700010739

5022 006A MXBK

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700010721

5022 008A MXBK

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700010713

5022 012A MXBK

12

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700010705

5022 018A MXBK

18

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700010697

5022 024A MXBK

24

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700010689

5022 036A MXBK

36

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700010671

5022 048A MXBK

48

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

700010663

5022 060A MXBK

60

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

700010655

5022 072A MXBK

72

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

700010648

5022 096A MXBK

96

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

700010630

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5021 004A MXBK

0.43 in (11.0 mm)

92 lbs/kft (137 kg/m)

700010622

5021 006A MXBK

0.43 in (11.0 mm)

92 lbs/kft (137 kg/m)

700010614

5021 008A MXBK

0.43 in (11.0 mm)

92 lbs/kft (137 kg/m)

700010606

5021 012A MXBK

12

0.43 in (11.0 mm)

92 lbs/kft (137 kg/m)

700010598

5021 024A MXBK

24

0.43 in (11.0 mm)

92 lbs/kft (137 kg/m)

700010580

5021 036A MXBK

36

0.51 in (13.0 mm))

92 lbs/kft (137 kg/m)

700010572

5021 048A MXBK

48

0.51 in (13.0 mm)

120 lbs/kft (179 kg/m)

700010564

5021 072A MXBK

72

0.59 in (15.0 mm)

151 lbs/kft (225 kg/m)

700010556

5021 096A MXBK

96

0.59 in (15.0 mm)

151 lbs/kft (225 kg/m)

700010549

OptiSPEED

OS Metallic

142

OptiSPEED Multimode
Indoor/Outdoor
Loose Tube Cable
The Plenum-Rated and Riser-Rated Indoor/Outdoor Stranded Loose
Tube Dielectric Cable allows for connectivity ease and superior
mid-span accessibility. The cable is designed to endure the rigors
of outdoor use, but can also be run directly in plenum airspace or
riser to eliminate a splice point at the building entrance. The basic
construction utilizes standard 3.0 mm gel-filled (5124 series) or dry
block (5125 series) buffer tubes which contain up to 12 optical
fibers. Buffer tubes are stranded around a rigid fiberglass central
strength member for protection against thermal expansion and
contraction at operational temperature extremes.
A fluoropolymer thermoplastic material is used for the outer jacket and buffer tubes to provide excellent petrochemical
resistance, flame propagation, and smoke generation properties that exceeds any similar cable design on the market today.
These cables are designed for installation loads up to 600 lbs (2,700 N) and long term loads up to 180 lbs (800 N).
All cables meet the mechanical and environmental requirements of Telcordia GR-20-CORE Issue 2 Generic Requirements for
Optical Fiber and Optical Fiber Cable and ANSI/ICEA S-87-640 Standard for Optical Fiber Outside Plan Communications Cable.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR

OptiSPEED

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Cable Jacket: UV Stabilized Black

Core Size: 62.5 micron
Buffer tubes and fibers are identified with standard color coding.

OS Plenum
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5125 006A MPBK

5125 012A MPBK

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016626

12

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016634

5125 024A MPBK

24

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016642

5125 036A MPBK

36

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016659

5125 048A MPBK

48

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016667

5125 072A MPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760016675

143

OS Riser

OptiSPEED

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5124 006A MRBK

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

700191430

5124 012A MRBK

12

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

700191448

5124 024A MRBK

24

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

700191455

5124 036A MRBK

36

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

700191463

5124 048A MRBK

48

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

700191471

5124 072A MRBK

72

0.53 in (13.6 mm)

115 lbs/kft (172 kg/km)

700191489

5124 096A MRBK

96

0.62 in (15.7 mm)

152 lbs/kft (226 kg/km)

700191497

5124 144A MRBK

144

0.78 in (19.8 mm)

239 lbs/kft (357 kg/km)

700191505

5124 288A MRBK

288

0.92 in (23.4 mm)

298 lbs/kft (445 kg/km)

700191513

OptiSPEED Multimode
Indoor/Outdoor
Tight Buffered Cable
The indoor/outdoor distribution cable provides network performance
for the applications of today and tomorrow that can be used in
non-traditional building entrance facilities.

Features and Benefits:

900 micron tight buffered construction allows for direct termination
eliminating the need for furcation which minimizes installation
expense
Utilizes water blocking technology which makes the cable suitable for the outside plant environment, with gel-free cable
access
Black, UV stabilized jacket is resistant to chemical, moisture, abrasion and sunlight and does not require additional protection in
most installations
All-dielectric construction eliminates the need for bonding and grounding
Tested and qualified to GR-409 with GR-20, environmental limits and ICEA-696 and ICEA-640 environmental limits.
Meets requirements for tight buffered constructions and suitable of installation in true OSP environmental conditions
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 158F (-30C to 70C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: Exceeds 126 lbf/in (22 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds 4.34 lbf-ft (5.88 N/m) (Test Method: FOTP 25)
Flexing: Exceeds 100 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: 62.5 micron

Fibers are identified with standard color coding.

144

OS Plenum
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5101 002A MPBK

Single Unit

0.17 in (4.2 mm)

10.7 lbs/kft (16 kg/km)

760037226

5101 004A MPBK

Single Unit

0.19 in (4.8 mm)

15.3 lbs/kft (23 kg/km)

760037234

5101 006A MPBK

Single Unit

0.20 in (5.1 mm)

18.7 lbs/kft (28 kg/km)

760036392

5101 008A MPBK

Single Unit

0.23 in (5.8 mm)

25.0 lbs/kft (37 kg/km)

760037242

5101 012A MPBK

12

Single Unit

0.27 in (6.9 mm)

36.0 lbs/kft (54 kg/km)

760037259

5101 018A MPBK

18

Single Unit

0.28 in (7.1 mm)

32.2 lbs/kft (48 kg/km)

760037267

5101 024A MPBK

24

Single Unit

0.31 in (7.9 mm)

41.1 lbs/kft (62 kg/km)

760037275

5104 036A MPBK

36

Multi-unit

0.67 in (17.1 mm)

174 lbs/kft (259 kg/km)

760037952

5104 048A MPBK

48

Multi-unit

0.74 in (18.9 mm)

222 lbs/kft (330 kg/km)

760037960

5104 060A MPBK

60

Multi-unit

0.85 in (21.5 mm)

287 lbs/kft (427 kg/km)

760037978

5104 072A MPBK

72

Multi-unit

0.93 in (23.7 mm)

357 lbs/kft (532 kg/km)

760037986

5104 096A MPBK

96

Multi-unit

1.11 in (28.2 mm)

542 lbs/kft (806 kg/km)

760037994

5104 144A MPBK

144

Multi-unit

1.19 in (30.3 mm)

558 lbs/kft (831 kg/km)

760038000
OptiSPEED

OS Riser
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5100 004A MRBK

Single Unit

0.20 in (5.1 mm)

14 lbs/kft (20 kg/km)

760005165

5100 012A MRBK

12

Single Unit

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

700211279

5103 024A MRBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

700211287

5103 036A MRBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

700211295

OS LSZH
Product Number

Fiber Count

Construction Type

Outside Diameter

Weight

Material ID

5102 012A MHBK

12

Single Unit

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

700010390

5105 024A MHBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

700008543

5105 036A MHBK

36

Multi-unit

0.73 in (18.5 mm)

155 lbs/kft (231 kg/km)

700008519

145

OptiSPEED Multimode
Fiber Optic Patch
Cords and Pigtails
Fiber patch cords are used to connect fiber optic equipment
to fiber optic cross-connects, inter-connects and information
outlets. The SYSTIMAX OptiSPEED fiber optic patch cord
family is used to support legacy 62.5 m multimode fiber
applications, and is configurable with standard LC, SC, and ST
terminations. The patch cords are available in either 1.6 mm
or 3.0 mm simplex or duplex zipcord.
OptiSPEED MM fiber patch cords are offered in riser, plenum,
and low smoke zero halogen (LSZH) options. Using the Fiber
Patch Cord Product Identifier (in Fiber Reference section), fiber
patch cord can be ordered with custom configured cordage size, jacket type, and length
in either feet or meters, providing the ultimate in flexibility to meet any cabling infrastructure design. LSZH fiber patch cords are
available for international region only.

Physical Specifications:

OptiSPEED

Optical Specifications:

1.6 mm and 3.0 mm Patch Cords

Outside Diameter (simplex):
1.6 mm: 1.6 mm
3.0 mm: 3.0 mm
Outside Diameter (zip cord):
1.6 mm: 1.6 mm x 3.3 mm
3.0 mm: 3.0 mm x 5.9 mm
Minimum Cable Retention Strength:
1.6 mm: 11.24 lbs (50 N)
3.0 mm: 11.24 lbs (50 N)
Minimum Bend Radius:
1.6 mm: Loaded: 2.0 in (5.1 cm)
Unloaded: 1.4 in (3.5 cm)
3.0 mm: Loaded: 2.3 in (5.8 cm)
Unloaded: 1.4 in (3.5 cm)
Maximum Cordage Tensile Load:
1.6 mm: Short Term: 70 lbs (311 N)
Long Term: 21 lbs (93 N)
3.0 mm: Short Term: 90 lbs (400 N)
Long Term: 27 lbs (120 N)

Fiber Type: 62.5 micron

Minimum Bandwidth:
200 MHz-km @ 850 nm
500 MHz-km @ 1300 nm

Pigtails
Detailed Description

Fire Rating

Fiber Count

Length

FPC Code
FPCMLCUC11-R

OptiSPEED MM LC / UC 0.9 mm Pigtail, Ruggedized

Riser

Configurable

OptiSPEED MM SC / UC 0.9 mm Pigtail, Ruggedized

Riser

Configurable

FPCMSCUC11-R

OptiSPEED MM STII+ / UC 0.9 mm Pigtail, Ruggedized

Riser

Configurable

FPCMEPUC11-R

OptiSPEED MM LC / UC 0.9 mm Pigtail, Tight Buffered Fiber

Riser

Configurable

FPCMLCUC01-R

OptiSPEED MM SC / UC 0.9 mm Pigtail, Tight Buffered Fiber

Riser

Configurable

FPCMSCUC01-R

OptiSPEED MM STII+ / UC 0.9 mm Pigtail, Tight Buffered Fiber Riser

Configurable

FPCMEPUC01-R

146

1.6 mm Patch Cords

Detailed Description

Fire Rating

Fiber Count

Length

OptiSPEED MM LC / LC 1.6 mm Duplex

Riser

Configurable

FPC Code
FPCMLCLC22-R

OptiSPEED MM LC / LC 1.6 mm Simplex

Riser

Configurable

FPCMLCLC21-R

OptiSPEED MM LC / SC 1.6 mm Duplex

Riser

Configurable

FPCMLCSC22-R

OptiSPEED MM LC / STII+ 1.6 mm Duplex

Riser

Configurable

FPCMLCEP22-R

OptiSPEED MM LC / STII+ 1.6 mm Simplex

Riser

Configurable

FPCMLCEP21-R

OptiSPEED MM SC / SC 1.6 mm Duplex

Riser

Configurable

FPCMSCSC22-R

OptiSPEED MM SC / SC 1.6 mm Simplex

Riser

Configurable

FPCMSCSC21-R

OptiSPEED MM SC / STII+ 1.6 mm Duplex

Riser

Configurable

FPCMSCEP22-R

OptiSPEED MM SC / STII+ 1.6 mm Simplex

Riser

Configurable

FPCMSCEP21-R

OptiSPEED MM LC / LC 1.6 mm Duplex

LSZH*

Configurable

FPCMLCLC22-H

OptiSPEED MM SC / SC 1.6 mm Duplex

LSZH*

Configurable

FPCMSCSC22-H

OptiSPEED MM LC / SC 1.6 mm Duplex

LSZH*

Configurable

FPCMLCSC22-H

Fire Rating

Fiber Count

Length

FPC Code

3.0 mm Patch Cords

Detailed Description

OptiSPEED

OptiSPEED MM SC / SC 3.0 mm Duplex

Riser

Configurable

FPCMSCSC32-R

OptiSPEED MM SC / SC 3.0 mm Simplex

Riser

Configurable

FPCMSCSC31-R

OptiSPEED MM SC / STII+ 3.0 mm Duplex

Riser

Configurable

FPCMSCEP32-R

OptiSPEED MM SC / STII+ 3.0 mm Simplex

Riser

Configurable

FPCMSCEP31-R

OptiSPEED MM STII+ / STII+ 3.0 mm Duplex

Riser

Configurable

FPCMEPEP32-R

OptiSPEED MM STII+ / STII+ 3.0 mm Simplex

Riser

Configurable

FPCMEPEP31-R

OptiSPEED MM LC / LC, 3.0 mm, Simplex

Plenum

Configurable

FPCMLCLC31-P

OptiSPEED MM LC / LC, 3.0 mm, Duplex

Plenum

Configurable

FPCMLCLC32-P

OptiSPEED MM SC / SC, 3.0 mm, Simplex

Plenum

Configurable

FPCMSCSC31-P

OptiSPEED MM SC / SC, 3.0 mm, Duplex

Plenum

Configurable

FPCMSCSC32-P

OptiSPEED MM STII / STII, 3.0 mm, Simplex

Plenum

Configurable

FPCMSTST31-P

OptiSPEED MM STII / STII, 3.0 mm, Duplex

Plenum

Configurable

FPCMSTST32-P

OptiSPEED MM SC / STII, 3.0 mm, Simplex

Plenum

Configurable

FPCMLCST31-P

OptiSPEED MM SC / STII, 3.0 mm, Duplex

Plenum

Configurable

FPCMLCST32-P

OptiSPEED MM LC / STII, 3.0 mm, Simplex

Plenum

Configurable

FPCMLCST31-P

OptiSPEED MM LC / STII, 3.0 mm, Duplex

Plenum

Configurable

FPCMLCST32-P

OptiSPEED MM LC / SC, 3.0 mm, Simplex

Plenum

Configurable

FPCMSCSC31-P

OptiSPEED MM LC / SC, 3.0 mm, Duplex

Plenum

Configurable

FPCMSCSC32-P

OptiSPEED MM SC / SC 3.0 mm Simplex

LSZH*

Configurable

FPCMSCSC31-H

OptiSPEED MM SC / SC 3.0 mm Duplex

LSZH*

Configurable

FPCMSCSC32-H

OptiSPEED MM STII / STII, 3.0 mm, Simplex

LSZH*

Configurable

FPCMSTST31-H

OptiSPEED MM STII / STII, 3.0 mm, Duplex

LSZH*

Configurable

FPCMSTST32-H

OptiSPEED MM LC / STII, 3.0 mm, Simplex

LSZH*

Configurable

FPCMSCST31-H

OptiSPEED MM SC / STII, 3.0 mm, Duplex

LSZH*

Configurable

FPCMSCST32-H

OptiSPEED MM LC / STII, 3.0 mm, Duplex

LSZH*

Configurable

FPCMLCST32-H

* LSZH fiber optic patch cords are offered in international only.

Hybrid MTRJ fiber patch cords are also available. Please refer to the Fiber Patch Cord Product Identifier for ordering information.

147

TeraSPEED/LazrSPEED
Composite
Building Cable
The SYSTIMAX TeraSPEED/LazrSPEED Composite Fiber Optic
Outside Plant cable provides the ultimate in future proofing. This
combination of fibers provides the benefits of a Zero Water Peak
singlemode, and LazrSPEED 150 or 300 laser Optimized Multimode
Fiber (LOMMF), the leading 10 Gbps (OM3) fiber. The incorporation
of both singlemode and multimode fibers under one jacket
provides not only for seamless future migration should the need
arise, but also for improved installation time and decreased
installation expense. This composite cable is reinforced with aramid yarn for superior strength.
This cable complies with the requirements of the National Electrical Code, Article 770-51; ANSI/TIA/EIA 568B.3, Optical Fiber
Cabling Components Standard and Telcordia Generic Requirements for Premises Fiber Optic Cable (GR-409-CORE), Section 6. It is
available with riser, plenum or low smoke zero halogen ratings.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Composite
Fiber

Operating Temperature: -4F to 158F (-20C to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0C to 70C)
Storage Temperature: -40F to 158F (-40C to 70C)
Crush Resistance: 57.3 lbf/in (10 N/mm) (Test Method: FOTP 41)
Impact Resistance: 4.34 lbf-ft (5.8 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 100 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)

LazrSPEED50 micron
Fibers are identified with standard color coding.

TS/LS 300 Plenum

Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5201 02/02A W/ZPAQ

0.17 in (4.4 mm)

12.2 lbs/kft (18 kg/km)

760008078

5201 02/04A W/ZPAQ

Single Unit

0.18 in (4.6 mm)

14.4 lbs/kft (21 kg/km)

760008086

5201 02/06A W/ZPAQ

Single Unit

0.20 in (5.1 mm)

16.8 lbs/kft (25 kg/km)

760008094

5201 04/04A W/ZPAQ

Single Unit

0.20 in (5.1 mm)

16.8 lbs/kft (25 kg/km)

760008102

5201 04/08A W/ZPAQ

12

Single Unit

0.22 in (5.7 mm)

20.8 lbs/kft (31 kg/km)

760008110

5201 06/06A W/ZPAQ

12

Single Unit

0.22 in (5.7 mm)

20.8 lbs/kft (31 kg/km)

760008128

5201 06/12A W/ZPAQ

18

Single Unit

0.31 in (7.9 mm)

40.9 lbs/kft (61 kg/km)

760018739

5201 06/18A W/ZPAQ

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

760018747

5201 12/12A W/ZPAQ

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

760018754

5301 06/12A W/ZPAQ

18

Multi-unit

0.45 in (11.5 mm)

96.1 lbs/kft (143 kg/km)

760008136

5301 06/18A W/ZPAQ

24

Multi-unit

0.5 in (12.7 mm)

104.5 lbs/kft (155 kg/km)

760008144

5301 12/12A W/ZPAQ

24

Multi-unit

0.5 in (12.7 mm)

104.5 lbs/kft (155 kg/km)

760008151

5301 12/24A W/ZPAQ

36

Multi-unit

0.54 in (13.7 mm)

128.4 lbs/kft (191 kg/km)

760008177

5301 12/36A W/ZPAQ

48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

760008193

5301 24/24A W/ZPAQ

48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

760008201

5301 12/48A W/ZPAQ

60

Multi-unit

0.68 in (17.2 mm)

190.0 lbs/kft (282 kg/km)

760008219

Single Unit

148

Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5301 24/48A W/ZPAQ

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760008227

5301 12/60A W/ZPAQ

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760008235

5301 36/36A W/ZPAQ

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760008243

Outside Diameter

Weight

Material ID

TS/LS 150 Plenum

Product Number

Fiber Count Construction Type

5201 06/12A W/HPAQ

18

Single Unit

0.31 in (7.9 mm)

40.9 lbs/kft (61 kg/km)

760019158

5301 06/12A W/HPAQ

18

Multi-unit

0.45 in (11.4 mm)

82.5 lbs/kft (123 kg/km)

760018770

5301 24/48A W/HPAQ

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760018788

TS/LS 300 Riser

Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5200 02/02A W/ZRAQ

Single Unit

0.19 in (4.8 mm)

13.1 lbs/kft (19 kg/km )

760007898

5200 02/04A W/ZRAQ

Single Unit

0.20 in (5.1 mm)

15.2 lbs/kft (23 kg/km )

760007906

5200 02/06A W/ZRAQ

Single Unit

0.22 in (5.5 mm)

17.2 lbs/kft (26 kg/km )

760007914

5200 04/04A W/ZRAQ

Single Unit

0.22 in (5.5 mm)

17.2 lbs/kft (26 kg/km )

760007922

5200 04/08A W/ZRAQ

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

760007930

5200 06/06A W/ZRAQ

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

760007948

5200 06/12A W/ZRAQ

18

Single Unit

0.30 in (7.7 mm)

32.1 lbs/kft (48 kg/km )

760018606

5200 06/18A W/ZRAQ

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

760018614

5200 12/12A W/ZRAQ

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

760018622

5300 06/12A W/ZRAQ

18

Multi-unit

0.48 in (12.3 mm)

99.8 lbs/kft (148 kg/km )

760007955

5300 06/18A W/ZRAQ

24

Multi-unit

0.56 in (14.1 mm)

106.7 lbs/kft (159 kg/km)

760007963

5300 12/12A W/ZRAQ

24

Multi-unit

0.56 in (14.1 mm)

106.7 lbs/kft (159 kg/km)

760007971

5300 12/24A W/ZRAQ

36

Multi-unit

0.58 in (14.6 mm)

112.4 lbs/kft (167 kg/km )

760007997

5300 12/36A W/ZRAQ

48

Multi-unit

0.63 in (16.1 mm)

142.8 lbs/kft (212 kg/km)

760008011

5300 24/24A W/ZRAQ

48

Multi-unit

0.63 in (16.1 mm)

142.8 lbs/kft (212 kg/km)

760008029

5300 12/48A W/ZRAQ

60

Multi-unit

0.71 in (18.0 mm)

187.6 lbs/kft (279 kg/km )

760008037

5300 24/48A W/ZRAQ

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

760008045

5300 12/60A W/ZRAQ

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

760008052

5300 36/36A W/ZRAQ

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

760008060

TS/LS 150 Riser

Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5200 06/12A W/HRAQ

18

Single Unit

0.30 in (7.7 mm)

32.1 lbs/kft (48 kg/km)

760019166

5300 06/12A W/HRAQ

18

Multi-unit

0.48 in (12.3 mm)

99.8 lbs/kft (148 kg/km)

760018390

5300 12/24A W/HRAQ

36

Multi-unit

0.58 in (14.6 mm)

112.4 lbs/kft (167 kg/km)

760024893

5300 24/48A W/HRAQ

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

760018408

149

Composite
Fiber

TS/LS 300 LSZH

Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5202 02/02A W/ZHAQ

Single Unit

0.19 in (4.8 mm)

14.3 lbs/kft (21 kg/km)

760009183

5202 02/04A W/ZHAQ

Single Unit

0.20 in (5.2 mm)

16.4 lbs/kft (24 kg/km)

760009191

5202 02/06A W/ZHAQ

Single Unit

0.22 in (5.5 mm)

19.1 lbs/kft (28 kg/km)

760009209

5202 04/04A W/ZHAQ

Single Unit

0.22 in (5.5 mm)

19.1 lbs/kft (28 kg/km)

760009217

5202 04/08A W/ZHAQ

12

Single Unit

0.24 in (6.1 mm)

23.0 lbs/kft (34 kg/km)

760009225

5202 06/06A W/ZHAQ

12

Single Unit

0.24 in (6.1 mm)

23.0 lbs/kft (34 kg/km)

760009233

5302 06/12A W/ZHAQ

18

Multi-unit

0.51 in (12.9 mm)

92.2 lbs/kft (137 kg/km)

760009241

5302 06/18A W/ZHAQ

24

Multi-unit

0.56 in (12.4 mm)

116.6 lbs/kft (174 kg/km)

760009258

5302 12/12A W/ZHAQ

24

Multi-unit

0.56 in (12.4 mm)

116.6 lbs/kft (174 kg/km)

760009266

5302 12/24A W/ZHAQ

36

Multi-unit

0.59 in (14.9 mm)

118.5 lbs/kft (176 kg/km)

760009282

5302 12/36A W/ZHAQ

48

Multi-unit

0.65 in (16.4 mm)

150.3 lbs/kft (224 kg/km)

760009308

5302 24/24A W/ZHAQ

48

Multi-unit

0.65 in (16.4 mm)

150.3 lbs/kft (224 kg/km)

760009316

5302 12/48A W/ZHAQ

60

Multi-unit

0.73 in (18.5 mm)

196.6 lbs/kft (293 kg/km)

760009324

5302 24/48A W/ZHAQ

72

Multi-unit

0.79 in (20.2 mm)

242.2 lbs/kft (360 kg/km)

760009332

5302 12/60A W/ZHAQ

72

Multi-unit

0.79 in (20.2 mm)

242.2 lbs/kft (360 kg/km)

760009340

5302 36/36A W/ZHAQ

72

Multi-unit

0.79 in (20.2 mm)

242.2 lbs/kft (360 kg/km)

760009357

Composite
Fiber

150

TeraSPEED/LazrSPEED
Composite Armored
Cables
SYSTIMAX Interlocking Armored Fiber Optic Cable provides superior
protection and space savings. It provides installation protection
from bending and excessive pull tension, significant time and
labor reductions versus conduit or interduct installations and
increased installation and design flexibility.
SYSTIMAX Interlocking Armor can be used anywhere additional
protection and security for the fiber cable is desired. Applications
include building backbone, zone distribution, raised floor, data centers and storage area networks
(SANs). Vertical markets include: industrial, manufacturing, airports, stadiums, military, and any other vertical where increased
protection and security for the fiber cable is desired. These include: financial, hospitals, educational facilities and many more.
The SYSTIMAX Interlocking Armor is applied spirally around any premise distribution cable, and is available in either steel or
aluminum. The armored cable is then over jacketed with a sheath. This sheath is color-coded to the fiber type contained within,
and provides not only the ability to print the armor with all relevant information on the cable inside, but also allows for easier
handling and pulling.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Operating Temperature: -4F to 158F (-20C to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0C to 70C)
Storage Temperature: -40F to 158F (-40C to 70C)
Crush Resistance: 486.8 lbf/in (85 N/mm) (Test Method: FOTP 41)
Impact Resistance: 25.8 lbf-ft (35 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Composite
Fiber

Physical Specifications:

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)

LazrSPEED50 micron
Fibers are identified with standard color coding.

TS/LS 300 Steel Armored Plenum

Product Number

Fiber Count Construction Type

Outside Diameter Weight

Material ID

5201 02/02A W/ZPAQ SPAQ

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

760008078-SPAQ

5201 02/04A W/ZPAQ SPAQ

Single Unit

0.56 in (14.1 mm)

163 lbs/kft (243 kg/km)

760008086-SPAQ

5201 02/06A W/ZPAQ SPAQ

Single Unit

0.56 in (14.1 mm)

165 lbs/kft (245 kg/km)

760008094-SPAQ

5201 04/04A W/ZPAQ SPAQ

Single Unit

0.56 in (14.1 mm)

165 lbs/kft (245 kg/km)

760008102-SPAQ

5201 04/08A W/ZPAQ SPAQ

12

Single Unit

0.56 in (14.1 mm)

169 lbs/kft (251 kg/km)

760008110-SPAQ

5201 06/06A W/ZPAQ SPAQ

12

Single Unit

0.56 in (14.1 mm)

169 lbs/kft (251 kg/km)

760008128-SPAQ

5201 06/12A W/ZPAQ SPAQ

18

Single Unit

0.66 in (16.6 mm)

225 lbs/kft (334 kg/km)

760018739-SPAQ

5201 06/18A W/ZPAQ SPAQ

24

Single Unit

0.66 in (16.6 mm)

231 lbs/kft (344 kg/km)

760018747-SPAQ

5201 12/12A W/ZPAQ SPAQ

24

Single Unit

0.66 in (16.6 mm)

231 lbs/kft (344 kg/km)

760018754-SPAQ

5301 06/12A W/ZPAQ SPAQ

18

Multi-unit

0.76 in (19.2 mm)

302 lbs/kft (450 kg/km)

760008136-SPAQ

5301 06/18A W/ZPAQ SPAQ

24

Multi-unit

0.86 in (21.7 mm)

364 lbs/kft (542 kg/km)

760008144-SPAQ

5301 12/12A W/ZPAQ SPAQ

24

Multi-unit

0.86 in (21.7 mm)

364 lbs/kft (542 kg/km)

760008151-SPAQ

5301 12/24A W/ZPAQ SPAQ

36

Multi-unit

0.86 in (21.7 mm)

384 lbs/kft (572 kg/km)

760008177-SPAQ

5301 12/36A W/ZPAQ SPAQ

48

Multi-unit

0.91 in (23.0 mm)

412 lbs/kft (613 kg/km)

760008193-SPAQ

151

Product Number

Fiber Count Construction Type

Outside Diameter Weight

Material ID

5301 24/24A W/ZPAQ SPAQ

48

0.91 in (23.0 mm)

760008201-SPAQ

Multi-unit

412 lbs/kft (613 kg/km)

5301 12/48A W/ZPAQ SPAQ

60

Multi-unit

1.01 in (25.5 mm)

476 lbs/kft (709 kg/km)

760008219-SPAQ

5301 12/60A W/ZPAQ SPAQ

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

760008235-SPAQ

5301 24/48A W/ZPAQ SPAQ

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

760008227-SPAQ

5301 36/36A W/ZPAQ SPAQ

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

760008243-SPAQ

TS/LS 150 Steel Armored Plenum

Product Number

Fiber Count Construction Type

Outside Diameter Weight

Material ID

5201 06/12A W/HPAQ SPAQ

18

Single Unit

0.66 in (16.6 mm)

225 lbs/kft (334 kg/km)

760019158-SPAQ

5301 06/12A W/HPAQ SPAQ

18

Multi-unit

0.76 in (19.2 mm)

302 lbs/kft (450 kg/km)

760018770-SPAQ

5301 24/48A W/HPAQ SPAQ

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

760018788-SPAQ

TS/LS 300 Steel Armored Riser

Composite
Fiber

Product Number

Fiber Count Construction Type

Outside Diameter Weight

Material ID

5200 02/02A W/ZRAQ SRAQ

0.56 in (14.1 mm)

760007898-SRAQ

Single Unit

154 lbs/kft (229 kg/km)

5200 02/04A W/ZRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

156 lbs/kft (232 kg/km)

760007906-SRAQ

5200 02/06A W/ZRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

760007914-SRAQ

5200 04/04A W/ZRAQ SRAQ

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

760007922-SRAQ

5200 04/08A W/ZRAQ SRAQ

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

760007930-SRAQ

5200 06/06A W/ZRAQ SRAQ

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

760007948-SRAQ

5200 06/18A W/ZRAQ SRAQ

24

Single Unit

0.66 in (16.6 mm)

213 lbs/kft (317 kg/km)

760018614-SRAQ

5200 12/12A W/ZRAQ SRAQ

24

Single Unit

0.66 in (16.6 mm)

213 lbs/kft (317 kg/km)

760018622-SRAQ

5300 06/12A W/ZRAQ SRAQ

18

Multi-unit

0.81 in (20.4 mm)

327 lbs/kft (486 kg/km)

760007955-SRAQ

5300 06/18A W/ZRAQ SRAQ

24

Multi-unit

0.91 in (23.0 mm)

368 lbs/kft (548 kg/km)

760007963-SRAQ

5300 12/12A W/ZRAQ SRAQ

24

Multi-unit

0.91 in (23.0 mm)

368 lbs/kft (548 kg/km)

760007971-SRAQ

5300 12/24A W/ZRAQ SRAQ

36

Multi-unit

0.91 in (23.0 mm)

374 lbs/kft (557 kg/km)

760007997-SRAQ

5300 12/36A W/ZRAQ SRAQ

48

Multi-unit

0.96 in (24.3 mm)

400 lbs/kft (595 kg/km)

760008011-SRAQ

5300 24/24A W/ZRAQ SRAQ

48

Multi-unit

0.96 in (24.3 mm)

400 lbs/kft (595 kg/km)

760008029-SRAQ

5300 12/48A W/ZRAQ SRAQ

60

Multi-unit

1.06 in (26.8 mm)

476 lbs/kft (709 kg/km)

760008037-SRAQ

5300 12/60A W/ZRAQ SRAQ

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

760008052-SRAQ

5300 24/48A W/ZRAQ SRAQ

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

760008045-SRAQ

5300 36/36A W/ZRAQ SRAQ

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

760008060-SRAQ

TS/LS 150 Steel Armored Riser

Product Number

Fiber Count Construction Type

5200 06/12A W/HRAQ SRAQ 18

Single Unit

Outside Diameter Weight

Material ID

0.66 in (16.6 mm)

760019166-SRAQ

207 lbs/kft (308 kg/km)

5300 06/12A W/HRAQ SRAQ 18

Multi-unit

0.81 in (20.4 mm)

327 lbs/kft (486 kg/km)

760018390-SRAQ

5300 12/24A W/HRAQ SRAQ 36

Multi-unit

0.91 in (23.0 mm)

374 lbs/kft (557 kg/km)

760024893-SRAQ

5300 24/48A W/HRAQ SRAQ 72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

760018408-SRAQ

152

TS/LS 300 Steel Armored LSZH

Product Number

Fiber Count Construction Type

5202 02/02A W/ZHAQ SHAQ 4

Single Unit

Outside Diameter Weight

Material ID

0.56 in (14.1 mm)

760009183-SHAQ

158 lbs/kft (235 kg/km)

5202 02/04A W/ZHAQ SHAQ 6

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

760009191-SHAQ

5202 02/06A W/ZHAQ SHAQ 8

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (242 kg/km)

760009209-SHAQ

5202 04/04A W/ZHAQ SHAQ 8

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (242 kg/km)

760009217-SHAQ

5202 04/08A W/ZHAQ SHAQ 12

Single Unit

0.56 in (14.1 mm)

166 lbs/kft (248 kg/km)

760009225-SHAQ

5202 06/06A W/ZHAQ SHAQ 12

Single Unit

0.56 in (14.1 mm)

166 lbs/kft (248 kg/km)

760009233-SHAQ

5202 06/12A W/ZHAQ SHAQ 18

Single Unit

0.66 in (16.6 mm)

215 lbs/kft (319 kg/km)

760019174-SHAQ

5202 06/18A W/ZHAQ SHAQ 24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km)

760019182-SHAQ

5202 12/12A W/ZHAQ SHAQ 24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km)

760019190-SHAQ

5302 06/12A W/ZHAQ SHAQ 18

Multi-unit

0.86 in (21.7 mm)

341 lbs/kft (507 kg/km)

760009241-SHAQ

5302 06/18A W/ZHAQ SHAQ 24

Multi-unit

0.91 in (23.0 mm)

383 lbs/kft (570 kg/km)

760009258-SHAQ

5302 12/12A W/ZHAQ SHAQ 24

Multi-unit

0.91 in (23.0 mm)

383 lbs/kft (570 kg/km)

760009266-SHAQ

5302 12/24A W/ZHAQ SHAQ 36

Multi-unit

0.91 in (23.0 mm)

385 lbs/kft (573 kg/km)

760009282-SHAQ

5302 12/36A W/ZHAQ SHAQ 48

Multi-unit

0.96 in (24.3 mm)

412 lbs/kft (614 kg/km)

760009308-SHAQ

5302 24/24A W/ZHAQ SHAQ 48

Multi-unit

0.96 in (24.3 mm)

412 lbs/kft (614 kg/km)

760009316-SHAQ

5302 12/48A W/ZHAQ SHAQ 60

Multi-unit

1.06 in (26.8 mm)

491 lbs/kft (730 kg/km)

760009324-SHAQ

5302 12/60A W/ZHAQ SHAQ 72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

760009340-SHAQ

5302 24/48A W/ZHAQ SHAQ 72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

760009332-SHAQ

5302 36/36A W/ZHAQ SHAQ 72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

760009357-SHAQ

TS/LS 300 Aluminum Armored Plenum

Product Number

Fiber Count Construction Type

Outside Diameter Weight

Material ID

5201 02/02A W/ZPAQ APAQ

0.56 in (14.1 mm)

760008078-APAQ

Single Unit

103 lbs/kft (154 kg/km)

5201 02/04A W/ZPAQ APAQ

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (158 kg/km)

760008086-APAQ

5201 02/06A W/ZPAQ APAQ

Single Unit

0.56 in (14.1 mm)

108 lbs/kft (160 kg/km)

760008094-APAQ

5201 04/04A W/ZPAQ APAQ

Single Unit

0.56 in (14.1 mm)

108 lbs/kft (160 kg/km)

760008102-APAQ

5201 04/08A W/ZPAQ APAQ

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

760008110-APAQ

5201 06/06A W/ZPAQ APAQ

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

760008128-APAQ

5301 06/12A W/ZPAQ APAQ

18

Single Unit

0.66 in (16.6 mm)

153 lbs/kft (227 kg/km)

760008136-APAQ

5201 06/12A W/ZPAQ APAQ

18

Single Unit

0.66 in (16.6 mm)

153 lbs/kft (227 kg/km)

760018739-APAQ

5201 06/18A W/ZPAQ APAQ

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

760018747-APAQ

5201 12/12A W/ZPAQ APAQ

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

760018754-APAQ

5301 06/18A W/ZPAQ APAQ

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

760008144-APAQ

5301 12/12A W/ZPAQ APAQ

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

760008151-APAQ

5301 12/24A W/ZPAQ APAQ

36

Multi-unit

0.86 in (21.7 mm)

282 lbs/kft (420 kg/km)

760008177-APAQ

5301 12/36A W/ZPAQ APAQ

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

760008193-APAQ

5301 24/24A W/ZPAQ APAQ

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

760008201-APAQ

5301 12/48A W/ZPAQ APAQ

60

Multi-unit

1.01 in (25.5 mm)

352 lbs/kft (524 kg/km)

760008219-APAQ

5301 12/60A W/ZPAQ APAQ

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

760008235-APAQ

5301 24/48A W/ZPAQ APAQ

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

760008227-APAQ

153

Composite
Fiber

TS/LS 150 Aluminum Armored Plenum

Product Number

Fiber Count Construction Type Outside Diameter

Weight

5201 06/12A W/HPAQ APAQ

18

Single Unit

0.66 in (16.6 mm)

153 lbs/kft (227 kg/km) 760019158-APAQ

Material ID

5301 24/48A W/HPAQ APAQ

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (633 kg/km) 760018788-APAQ

5301 06/12A W/HPAQ APAQ

18

Multi-unit

0.76 in (19.2 mm)

215 lbs/kft (320 kg/km) 760018770-APAQ

TS/LS 300 Aluminum Armored Riser

Product Number

Composite
Fiber

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5200 02/02A W/ZRAQ ARAQ 4

Single Unit

0.56 in (14.1 mm)

97 lbs/kft (144 kg/km)

760007898-ARAQ

5200 02/04A W/ZRAQ ARAQ 6

Single Unit

0.56 in (14.1 mm)

99 lbs/kft (147 kg/km)

760007906-ARAQ

5200 02/06A W/ZRAQ ARAQ 8

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km) 760007914-ARAQ

5200 04/04A W/ZRAQ ARAQ 8

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km) 760007922-ARAQ

5200 04/08A W/ZRAQ ARAQ 12

Single Unit

0.56 in (14.1 mm)

105 lbs/kft (157 kg/km) 760007930-ARAQ

5200 06/06A W/ZRAQ ARAQ 12

Single Unit

0.56 in (14.1 mm)

105 lbs/kft (157 kg/km) 760007948-ARAQ

5200 06/12A W/ZRAQ ARAQ 18

Single Unit

0.66 in (16.6 mm)

135 lbs/kft (201 kg/km) 760018606-ARAQ

5300 06/12A W/ZRAQ ARAQ 18

Multi-unit

0.81 in (20.4 mm)

232 lbs/kft (345 kg/km) 760007955-ARAQ

5200 06/18A W/ZRAQ ARAQ 24

Multi-unit

0.66 in (16.6 mm)

141 lbs/kft (210 kg/km) 760018614-ARAQ

5200 12/12A W/ZRAQ ARAQ 24

Multi-unit

0.66 in (16.6 mm)

141 lbs/kft (210 kg/km) 760018622-ARAQ

5300 06/18A W/ZRAQ ARAQ 24

Multi-unit

0.91 in (23.0 mm)

258 lbs/kft (385 kg/km) 760007963-ARAQ

5300 12/12A W/ZRAQ ARAQ 24

Multi-unit

0.91 in (23.0 mm)

258 lbs/kft (385 kg/km) 760007971-ARAQ

5300 12/24A W/ZRAQ ARAQ 36

Multi-unit

0.91 in (23.0 mm)

264 lbs/kft (393 kg/km) 760007997-ARAQ

5300 12/36A W/ZRAQ ARAQ 48

Multi-unit

0.96 in (24.3 mm)

283 lbs/kft (422 kg/km) 760008011-ARAQ

5300 24/24A W/ZRAQ ARAQ 48

Multi-unit

0.96 in (24.3 mm)

283 lbs/kft (422 kg/km) 760008029-ARAQ

5300 12/48A W/ZRAQ ARAQ 60

Multi-unit

1.06 in (26.8 mm)

345 lbs/kft (513 kg/km) 760008037-ARAQ

5300 12/60A W/ZRAQ ARAQ 72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km) 760008052-ARAQ

5300 24/48A W/ZRAQ ARAQ 72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km) 760008045-ARAQ

5300 36/36A W/ZRAQ ARAQ 72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km) 760008060-ARAQ

TS/LS 150 Aluminum Armored Riser

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5200 06/12A W/HRAQ ARAQ 18

Single Unit

0.66 in (16.6 mm)

135 lbs/kft (201 kg/km) 760019166-ARAQ

5300 06/12A W/HRAQ ARAQ 18

Multi-unit

0.81 in (20.4 mm)

232 lbs/kft (345 kg/km) 760018390-ARAQ

5300 12/24A W/HRAQ ARAQ 36

Multi-unit

0.91 in (23.0 mm)

264 lbs/kft (393 kg/km) 760024893-ARAQ

5300 24/48A W/HRAQ ARAQ 72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km) 760018408-ARAQ

154

TS/LS 300 Aluminum Armored LSZH

Product Number

Fiber Count Construction Type Outside Diameter

Weight

Material ID

5202 02/02A W/ZHAQ AHAQ 4

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km) 760009183-AHAQ

5202 02/04A W/ZHAQ AHAQ 6

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (153 kg/km) 760009191-AHAQ

5202 02/06A W/ZHAQ AHAQ 8

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (157 kg/km) 760009209-AHAQ

5202 04/04A W/ZHAQ AHAQ 8

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (157 kg/km) 760009217-AHAQ

5202 04/08A W/ZHAQ AHAQ 12

Single Unit

0.56 in (14.1 mm)

109 lbs/kft (163 kg/km) 760009225-AHAQ

5202 06/06A W/ZHAQ AHAQ 12

Single Unit

0.56 in (14.1 mm)

109 lbs/kft (163 kg/km) 760009233-AHAQ

5202 06/12A W/ZHAQ AHAQ 18

Single Unit

0.66 in (16.6 mm)

215 lbs/kft (319 kg/km) 760019174-AHAQ

5202 06/18A W/ZHAQ AHAQ 24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km) 760019182-AHAQ

5202 12/12A W/ZHAQ AHAQ 24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km) 760019190-AHAQ

5302 06/12A W/ZHAQ AHAQ 18

Multi-unit

0.86 in (21.7 mm)

239 lbs/kft (355 kg/km) 760009241-AHAQ

5302 06/18A W/ZHAQ AHAQ 24

Multi-unit

0.91 in (23.0 mm)

273 lbs/kft (406 kg/km) 760009258-AHAQ

5302 12/12A W/ZHAQ AHAQ 24

Multi-unit

0.91 in (23.0 mm)

273 lbs/kft (406 kg/km) 760009266-AHAQ

5302 12/24A W/ZHAQ AHAQ 36

Multi-unit

0.91 in (23.0 mm)

275 lbs/kft (409 kg/km) 760009282-AHAQ

5302 12/36A W/ZHAQ AHAQ 48

Multi-unit

0.96 in (24.3 mm)

296 lbs/kft (440 kg/km) 760009308-AHAQ

5302 24/24A W/ZHAQ AHAQ 48

Multi-unit

0.96 in (24.3 mm)

296 lbs/kft (440 kg/km) 760009316-AHAQ

5302 12/48A W/ZHAQ AHAQ 60

Multi-unit

1.06 in (26.8 mm)

359 lbs/kft (535 kg/km) 760009324-AHAQ

5302 12/60A W/ZHAQ AHAQ 72

Multi-unit

1.11 in (28.1 mm)

414 lbs/kft (616 kg/km) 760009340-AHAQ

5302 24/48A W/ZHAQ AHAQ 72

Multi-unit

1.11 in (28.1 mm)

414 lbs/kft (616 kg/km) 760009332-AHAQ

5302 36/36A W/ZHAQ AHAQ 72

Multi-unit

1.11 in (28.1 mm)

414 lbs/kft (616 kg/km) 760009357-AHAQ

155

Composite
Fiber

TeraSPEED/OptiSPEED
Composite Building
Cable
The SYSTIMAX TeraSPEED/OptiSPEED Composite cable incorporates
the new TeraSPEED singlemode fiber with the OptiSPEED
multimode fiber, all under one jacket. This provides a cost-effective
alternative for those with modest bandwidth requirements
today, while allowing a seamless migration to singlemode for
future requirements. Having both singlemode and multimode
fibers under one jacket provides not only for future migration
should the need arise, but also for improved installation time
and decreased installation expense. TeraSPEED/OptiSPEED composite premise riser cable is
reinforced with aramid yarn for superior strength and is available in riser, plenum, and low smoke zero halogen rating.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Operating Temperature: -4F to 158F (-20C to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0C to 70C)
Storage Temperature: -40F to 158F (-40C to 70C)
Crush Resistance: 57.3 lbf/in (10 N/mm) (Test Method: FOTP 41)
Impact Resistance: 4.34 lbf-ft (5.8 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 100 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)
Composite
Fiber

Physical Specifications:

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)

OptiSPEED62.5 micron
Fibers are identified with standard color coding.

TS/OS Plenum
Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5201 02/02A W/MPSL

Single Unit

0.17 in (4.4 mm)

12.2 lbs/kft (18 kg/km)

760007716

5201 02/04A W/MPSL

Single Unit

0.18 in (4.6 mm)

14.4 lbs/kft (21 kg/km)

760007724

5201 02/06A W/MPSL

Single Unit

0.20 in (5.1 mm)

16.8 lbs/kft (25 kg/km)

760007732

5201 04/04A W/MPSL

Single Unit

0.20 in (5.1 mm)

16.8 lbs/kft (25 kg/km)

760007740

5201 04/08A W/MPSL

12

Single Unit

0.23 in (5.8 mm)

20.8 lbs/kft (31 kg/km)

760007757

5201 06/06A W/MPSL

12

Single Unit

0.22 in (5.7 mm)

20.8 lbs/kft (31 kg/km)

760007765

5201 06/12A W/MPSL

18

Single Unit

0.31 in (7.9 mm)

40.9 lbs/kft (61 kg/km)

760018705

5201 06/18A W/MPSL

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

760018713

5201 12/12A W/MPSL

24

Single Unit

0.33 in (8.5 mm)

47.3 lbs/kft (70 kg/km)

760018721

5301 06/12A W/MPSL

18

Multi-unit

0.45 in (11.5 mm)

96.1 lbs/kft (143 kg/km)

760007773

5301 06/18A W/MPSL

24

Multi-unit

0.5 in (12.7 mm)

104.5 lbs/kft (155 kg/km)

760007781

5301 12/12A W/MPSL

24

Multi-unit

0.5 in (12.7 mm)

104.5 lbs/kft (155 kg/km)

760007799

5301 12/24A W/MPSL

36

Multi-unit

0.54 in (13.7 mm)

128.4 lbs/kft (191 kg/km)

760007815

5301 12/36A W/MPSL

48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

760007831

5301 24/24A W/MPSL

48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

760007849

5301 12/48A W/MPSL

60

Multi-unit

0.68 in (17.2 mm)

190.0 lbs/kft (282 kg/km)

760007856

5301 24/48A W/MPSL

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760007864

5301 12/60A W/MPSL

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760007872

5301 36/36A W/MPSL

72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760007880

156

TS/OS Riser
Product Number

Fiber Count Construction Type Outside Diameter Weight

Color

Material ID

5200 02/02A W/MRSL

Single Unit

0.19 in (4.8 mm)

13.1 lbs/kft (19 kg/km)

Slate

760007534

5200 02/04A W/MRSL

Single Unit

0.20 in (5.1 mm)

15.2 lbs/kft (23 kg/km)

Slate

760007559

5200 02/06A W/MRSL

Single Unit

0.22 in (5.5 mm)

17.2 lbs/kft (26 kg/km)

Slate

760007567

5200 04/04A W/MRSL

Single Unit

0.22 in (5.5 mm)

17.2 lbs/kft (26 kg/km)

Slate

760007575

5200 04/08A W/MRSL

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

Slate

760007583

5200 06/06A W/MRSL

12

Single Unit

0.24 in (6.0 mm)

21.7 lbs/kft (32 kg/km)

Slate

760007591

5200 06/12A W/MRSL

18

Single Unit

0.30 in (7.7 mm)

32.1 lbs/kft (48 kg/km)

Slate

760018572

5200 06/18A W/MRSL

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

Slate

760018580

5200 12/12A W/MRSL

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

Slate

760018598

5200 12/12A W/MROR

24

Single Unit

0.33 in (8.4 mm)

37.9 lbs/kft (56 kg/km)

Orange 760026393

5300 06/12A W/MRSL

18

Multi-unit

0.48 in (12.3 mm)

99.8 lbs/kft (148 kg/km)

Slate

760007609

5300 06/18A W/MRSL

24

Multi-unit

0.56 in (14.1 mm)

106.7 lbs/kft (159 kg/km)

Slate

760007617

5300 12/12A W/MRSL

24

Multi-unit

0.56 in (14.1 mm)

106.7 lbs/kft (159 kg/km)

Slate

760007625

5300 12/24A W/MRSL

36

Multi-unit

0.58 in (14.6 mm)

112.4 lbs/kft (167 kg/km)

Slate

760007641

5300 12/36A W/MRSL

48

Multi-unit

0.63 in (16.1 mm)

142.8 lbs/kft (212 kg/km)

Slate

760007666

5300 12/60A W/MRSL

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

Slate

760007682

5300 24/24A W/MRSL

48

Multi-unit

0.63 in (16.1 mm)

142.8 lbs/kft (212 kg/km)

Slate

760007674

5300 24/48A W/MRSL

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

Slate

760007690

5300 36/36A W/MRSL

72

Multi-unit

0.79 in (19.9 mm)

231.6 lbs/kft (345 kg/km)

Slate

760007708

5300 48/48A W/MRSL

96

Multi-unit

0.93 in (23.7 mm)

337.2 lbs/kft (502 kg/km)

Slate

760017616

TS/OS LSZH
Product Number

Fiber Count Construction Type Outside Diameter Weight

Material ID

5202 02/02A W/MHOR 4

Single Unit

0.17 in (4.4 mm)

12.2 lbs/kft (18 kg/km)

760009001

5202 02/04A W/MHOR 6

Single Unit

0.18 in (4.6 mm)

14.4 lbs/kft (21 kg/km)

760009019

5202 02/06A W/MHOR 8

Single Unit

0.20 in (5.1 mm)

16.8 lbs/kft (25 kg/km)

760009027

5202 04/04A W/MHOR 8

Single Unit

0.20 in (5.1 mm)

16.8 lbs/kft (25 kg/km)

760009035

5202 04/08A W/MHOR 12

Single Unit

0.22 in (5.7 mm)

20.8 lbs/kft (31 kg/km)

760009043

5202 06/06A W/MHOR 12

Single Unit

0.22 in (5.7 mm)

20.8 lbs/kft (31 kg/km)

760009050

5302 06/12A W/MHOR 18

Multi-unit

0.45 in (11.5 mm)

96.1 lbs/kft (143 kg/km)

760009068

5302 06/18A W/MHOR 24

Multi-unit

0.5 in (12.7 mm)

104.5 lbs/kft (155 kg/km)

760009076

5302 12/12A W/MHOR 24

Multi-unit

0.5 in (12.7 mm)

104.5 lbs/kft (155 kg/km)

760009084

5302 12/24A W/MHOR 36

Multi-unit

0.54 in (13.7 mm)

128.4 lbs/kft (191 kg/km)

760009100

5302 12/36A W/MHOR 48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

760009126

5302 24/24A W/MHOR 48

Multi-unit

0.59 in (15.1 mm)

137.7 lbs/kft (205 kg/km)

760009134

5302 12/48A W/MHOR 60

Multi-unit

0.68 in (17.2 mm)

190.0 lbs/kft (282 kg/km)

760009142

5302 24/48A W/MHOR 72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760009159

5302 12/60A W/MHOR 72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760009167

5302 36/36A W/MHOR 72

Multi-unit

0.75 in (19.1 mm)

237.1 lbs/kft (353 kg/km)

760009175

157

Composite
Fiber

TeraSPEED/OptiSPEED
Composite Armored
Cables
SYSTIMAX Interlocking Armored Fiber Optic Cable provides superior
protection and space savings. It provides installation protection
from bending and excessive pull tension, significant time and labor
reductions versus conduit or interduct installations and increased
installation and design flexibility.
SYSTIMAX Interlocking Armor can be used anywhere additional
protection and security for the fiber cable is desired. Applications
include building backbone, zone distribution, raised floor, data
centers, and storage area networks (SANs). Vertical markets include: industrial, manufacturing, airports, stadiums, military, and any other vertical where increased protection and security for the fiber cable is desired.
These include: financial, hospitals, educational facilities and many more.
The SYSTIMAX Interlocking Armor is applied spirally around any premise distribution cable, and is available in either steel or
aluminum. The armored cable is then over jacketed with a sheath. This sheath is color-coded to the fiber type contained within,
and provides not only the ability to print the armor with all relevant information on the cable inside, but also allows for easier
handling and pulling.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR
The LSZH cable is (UL and cUL) TYPE OFNR, OFN-LS, IEC60332-3C and IEC61034-2 compliant

Environmental and Mechanical Specifications:

Composite
Fiber

Operating Temperature: -4F to 158F (-20C to 70C) (Test Method: FOTP 3)

Installation Temperature: 32F to 158F (0C to 70C)
Storage Temperature: -40F to 158F (-40C to 70C)
Crush Resistance: 486.8 lbf/in (85 N/mm) (Test Method: FOTP 41)
Impact Resistance: 25.8 lbf-ft (35 N-m) (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Core Size: TeraSPEED8.3 micron ( 9 micron mode

field diameter)
OptiSPEED62.5 micron
Fibers are identified with standard color coding.

TS/OS Steel Armored Plenum

Product Number

Fiber Count Construction Type Outside Diameter Weight

Material ID

5201 02/02A W/MPSL SPSL

760007716-SPSL

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

5201 02/04A W/MPSL SPSL

Single Unit

0.56 in (14.1 mm)

163 lbs/kft (243 kg/km)

760007724-SPSL

5201 02/06A W/MPSL SPSL

Single Unit

0.56 in (14.1 mm)

165 lbs/kft (245 kg/km)

760007732-SPSL

5201 04/04A W/MPSL SPSL

Single Unit

0.56 in (14.1 mm)

165 lbs/kft (245 kg/km)

760007740-SPSL

5201 04/08A W/MPSL SPSL

12

Single Unit

0.56 in (14.1 mm)

169 lbs/kft (251 kg/km)

760007757-SPSL

5201 06/06A W/MPSL SPSL

12

Single Unit

0.56 in (14.1 mm)

169 lbs/kft (251 kg/km)

760007765-SPSL

5201 06/12A W/MPSL SPSL

18

Single Unit

0.66 in (16.6 mm)

225 lbs/kft (334 kg/km)

760018705-SPAQ

5201 06/18A W/MPSL SPSL

24

Single Unit

0.66 in (16.6 mm)

231 lbs/kft (344 kg/km)

760018713-SPSL

5201 12/12A W/MPSL SPSL

24

Single Unit

0.66 in (16.6 mm)

231 lbs/kft (344 kg/km)

760018721-SPSL

5301 06/12A W/MPSL SPSL

18

Multi-unit

0.76 in (19.2 mm)

302 lbs/kft (450 kg/km)

760007773-SPSL

5301 06/18A W/MPSL SPSL

24

Multi-unit

0.86 in (21.7 mm)

364 lbs/kft (542 kg/km)

760007781-SPSL

5301 12/12A W/MPSL SPSL

24

Multi-unit

0.86 in (21.7 mm)

364 lbs/kft (542 kg/km)

760007799-SPSL

5301 12/24A W/MPSL SPSL

36

Multi-unit

0.86 in (21.7 mm)

384 lbs/kft (572 kg/km)

760007815-SPSL

5301 12/36A W/MPSL SPSL

48

Multi-unit

0.91 in (23.0 mm)

412 lbs/kft (613 kg/km)

760007831-SPSL

5301 24/24A W/MPSL SPSL

48

Multi-unit

0.91 in (23.0 mm)

412 lbs/kft (613 kg/km)

760007849-SPSL

5301 12/48A W/MPSL SPSL

60

Multi-unit

1.01 in (25.5 mm)

476 lbs/kft (709 kg/km)

760007856-SPSL

5301 12/60A W/MPSL SPSL

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

760007872-SPSL

5301 24/48A W/MPSL SPSL

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

760007864-SPSL

5301 36/36A W/MPSL SPSL

72

Multi-unit

1.11 in (28.1 mm)

557 lbs/kft (829 kg/km)

760007880-SPSL

158

TS/OS Steel Armored Riser

Product Number

Fiber Count Construction Type Outside Diameter Weight

Material ID

5200 02/02A W/MRSL SRSL

760007534-SRSL

Single Unit

0.56 in (14.1 mm)

154 lbs/kft (229 kg/km)

5200 02/04A W/MRSL SRSL

Single Unit

0.56 in (14.1 mm)

156 lbs/kft (232 kg/km)

760007559-SRSL

5200 02/06A W/MRSL SRSL

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

760007567-SRSL

5200 04/04A W/MRSL SRSL

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

760007575-SRSL

5200 04/08A W/MRSL SRSL

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

760007583-SRSL

5200 06/06A W/MRSL SRSL

12

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (241 kg/km)

760007591-SRSL

5200 06/12A W/MRSL SRSL

18

Single Unit

0.66 in (16.6 mm)

207 lbs/kft (308 kg/km)

760018572-SRSL

5200 06/18A W/MRSL SRSL

24

Single Unit

0.66 in (16.6 mm)

213 lbs/kft (317 kg/km)

760018580-SRSL

5200 12/12A W/MRSL SRSL

24

Single Unit

0.66 in (16.6 mm)

213 lbs/kft (317 kg/km)

760018598-SRSL

5200 12/12A W/MROR SROR

24

Single Unit

0.66 in (16.6 mm)

213 lbs/kft (317 kg/km)

760026393-SROR

5300 06/12A W/MRSL SRSL

18

Multi-unit

0.81 in (20.4 mm)

327 lbs/kft (486 kg/km)

760007609-SRSL

5300 06/18A W/MRSL SRSL

24

Multi-unit

0.91 in (23.0 mm)

368 lbs/kft (548 kg/km)

760007617-SRSL

5300 12/12A W/MRSL SRSL

24

Multi-unit

0.91 in (23.0 mm)

368 lbs/kft (548 kg/km)

760007625-SRSL

5300 12/24A W/MRSL SRSL

36

Multi-unit

0.91 in (23.0 mm)

374 lbs/kft (557 kg/km)

760007641-SRSL

5300 12/36A W/MRSL SRSL

48

Multi-unit

0.96 in (24.3 mm)

400 lbs/kft (595 kg/km)

760007666-SRSL

5300 24/24A W/MRSL SRSL

48

Multi-unit

0.96 in (24.3 mm)

400 lbs/kft (595 kg/km)

760007674-SRSL

5300 12/60A W/MRSL SRSL

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

760007682-SRSL

5300 24/48A W/MRSL SRSL

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

760007690-SRSL

5300 36/36A W/MRSL SRSL

72

Multi-unit

1.11 in (28.1 mm)

536 lbs/kft (798 kg/km)

760007708-SRSL

5300 48/48A W/MRSL SRSL

96

Multi-unit

1.26 in (31.9 mm)

689 lbs/kft (1026 kg/km) 760017616-SRSL

TS/OS Steel Armored LSZH

Product Number

Fiber Count Construction Type Outside Diameter Weight

5202 02/02A W/MHOR SHOR 4

Single Unit

0.56 in (14.1 mm)

158 lbs/kft (235 kg/km)

Material ID
760009001-SHOR

5202 02/04A W/MHOR SHOR 6

Single Unit

0.56 in (14.1 mm)

160 lbs/kft (238 kg/km)

760009019-SHOR

5202 02/06A W/MHOR SHOR 8

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (242 kg/km)

760009027-SHOR

5202 04/04A W/MHOR SHOR 8

Single Unit

0.56 in (14.1 mm)

162 lbs/kft (242 kg/km)

760009035-SHOR

5202 04/08A W/MHOR SHOR 12

Single Unit

0.56 in (14.1 mm)

166 lbs/kft (248 kg/km)

760009043-SHOR

5202 06/06A W/MHOR SHOR 12

Single Unit

0.56 in (14.1 mm)

166 lbs/kft (248 kg/km)

760009050-SHOR

5202 06/12A W/MHOR SHOR 18

Single Unit

0.66 in (16.6 mm)

215 lbs/kft (319 kg/km)

760019125-SHOR

5202 06/18A W/MHOR SHOR 24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km)

760019133-SHOR

5202 12/12A W/MHOR SHOR 24

Single Unit

0.66 in (16.6 mm)

223 lbs/kft (331 kg/km)

760019141-SHOR

5302 06/12A W/MHOR SHOR 18

Multi-unit

0.86 in (21.7 mm)

341 lbs/kft (507 kg/km)

760009068-SHOR

5302 06/18A W/MHOR SHOR 24

Multi-unit

0.91 in (23.0 mm)

383 lbs/kft (570 kg/km)

760009076-SHOR

5302 12/12A W/MHOR SHOR 24

Multi-unit

0.91 in (23.0 mm)

383 lbs/kft (570 kg/km)

760009084-SHOR

5302 12/24A W/MHOR SHOR 36

Multi-unit

0.91 in (23.0 mm)

385 lbs/kft (573 kg/km)

760009100-SHOR

5302 12/36A W/MHOR SHOR 48

Multi-unit

0.96 in (24.3 mm)

412 lbs/kft (614 kg/km)

760009126-SHOR

5302 24/24A W/MHOR SHOR 48

Multi-unit

0.96 in (24.3 mm)

412 lbs/kft (614 kg/km)

760009134-SHOR

5302 12/48A W/MHOR SHOR 60

Multi-unit

1.06 in (26.8 mm)

491 lbs/kft (730 kg/km)

760009142-SHOR

5302 12/60A W/MHOR SHOR 72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

760009167-SHOR

5302 24/48A W/MHOR SHOR 72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

760009159-SHOR

5302 36/36A W/MHOR SHOR 72

Multi-unit

1.11 in (28.1 mm)

552 lbs/kft (822 kg/km)

760009175-SHOR

159

Composite
Fiber

TS/OS Aluminum Armored Plenum

Composite
Fiber

Product Number

Fiber Count Construction Type Outside Diameter Weight

Material ID

5201 02/02A W/MPSL APSL

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (154 kg/km)

760007716-APSL

5201 02/04A W/MPSL APSL

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (158 kg/km)

760007724-APSL

5201 02/06A W/MPSL APSL

Single Unit

0.56 in (14.1 mm)

108 lbs/kft (160 kg/km)

760007732-APSL

5201 04/04A W/MPSL APSL

Single Unit

0.56 in (14.1 mm)

108 lbs/kft (160 kg/km)

760007740-APSL

5201 04/08A W/MPSL APSL

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

760007757-APSL

5201 06/06A W/MPSL APSL

12

Single Unit

0.56 in (14.1 mm)

112 lbs/kft (166 kg/km)

760007765-APSL

5201 06/12A W/MPSL APSL

18

Single Unit

0.66 in (16.6 mm)

153 lbs/kft (227 kg/km)

760018705-APAQ

5201 06/18A W/MPSL APSL

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

760018713-APSL

5201 12/12A W/MPSL APSL

24

Single Unit

0.66 in (16.6 mm)

159 lbs/kft (237 kg/km)

760018721-APSL

5301 06/12A W/MPSL APSL

18

Multi-unit

0.76 in (19.2 mm)

215 lbs/kft (320 kg/km)

760007773-APSL

5301 06/18A W/MPSL APSL

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

760007781-APSL

5301 12/12A W/MPSL APSL

24

Multi-unit

0.86 in (21.7 mm)

262 lbs/kft (389 kg/km)

760007799-APSL

5301 12/24A W/MPSL APSL

36

Multi-unit

0.86 in (21.7 mm)

282 lbs/kft (420 kg/km)

760007815-APSL

5301 12/36A W/MPSL APSL

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

760007831-APSL

5301 24/24A W/MPSL APSL

48

Multi-unit

0.91 in (23.0 mm)

302 lbs/kft (449 kg/km)

760007849-APSL

5301 12/48A W/MPSL APSL

60

Multi-unit

1.01 in (25.5 mm)

352 lbs/kft (524 kg/km)

760007856-APSL

5301 12/60A W/MPSL APSL

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

760007872-APSL

5301 24/48A W/MPSL APSL

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

760007864-APSL

5301 36/36A W/MPSL APSL

72

Multi-unit

1.11 in (28.1 mm)

418 lbs/kft (622 kg/km)

760007880-APSL

TS/OS Aluminum Armored Riser

Product Number

Pair Count

Construction Type Outside Diameter Weight

Material ID

5200 02/02A W/MRSL ARSL

Single Unit

760007534-ARSL

0.56 in (14.1 mm)

97 lbs/kft (144 kg/km)

5200 02/04A W/MRSL ARSL

Single Unit

0.56 in (14.1 mm)

99 lbs/kft (147 kg/km)

760007559-ARSL

5200 02/06A W/MRSL ARSL

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

760007567-ARSL

5200 04/04A W/MRSL ARSL

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

760007575-ARSL

5200 04/08A W/MRSL ARSL

12

Single Unit

0.56 in (14.1 mm)

105 lbs/kft (157 kg/km)

760007583-ARSL

5200 06/06A W/MRSL ARSL

12

Single Unit

0.56 in (14.1 mm)

102 lbs/kft (152 kg/km)

760007591-ARSL

5200 06/12A W/MRSL ARSL

18

Single Unit

0.66 in (16.6 mm)

135 lbs/kft (201 kg/km)

760018572-ARSL

5200 06/18A W/MRSL ARSL

24

Single Unit

0.66 in (16.6 mm)

141 lbs/kft (210 kg/km)

760018580-ARSL

5200 12/12A W/MRSL ARSL

24

Single Unit

0.66 in (16.6 mm)

141 lbs/kft (210 kg/km)

760018598-ARSL

5200 12/12A W/MROR AROR

24

Single Unit

0.66 in (16.6 mm)

141 lbs/kft (210 kg/km)

760026393-AROR

5300 06/12A W/MRSL ARSL

18

Multi-unit

0.81 in (20.4 mm)

232 lbs/kft (345 kg/km)

760007609-ARSL

5300 06/18A W/MRSL ARSL

24

Multi-unit

0.91 in (23.0 mm)

106.7 lbs/kft (159 kg/km) 760007617-ARSL

5300 12/12A W/MRSL ARSL

24

Multi-unit

0.91 in (23.0 mm)

106.7 lbs/kft (159 kg/km) 760007625-ARSL

5300 12/24A W/MRSL ARSL

36

Multi-unit

0.91 in (23.0 mm)

264 lbs/kft (393 kg/km)

760007641-ARSL

5300 12/36A W/MRSL ARSL

48

Multi-unit

0.96 in (24.3 mm)

283 lbs/kft (422 kg/km)

760007666-ARSL

5300 24/24A W/MRSL ARSL

48

Multi-unit

0.96 in (24.3 mm)

283 lbs/kft (422 kg/km)

760007674-ARSL

5300 12/60A W/MRSL ARSL

72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km)

760007682-ARSL

5300 24/48A W/MRSL ARSL

72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km)

760007690-ARSL

5300 36/36A W/MRSL ARSL

72

Multi-unit

1.11 in (28.1 mm)

397 lbs/kft (591 kg/km)

760007708-ARSL

5300 48/48A W/MRSL ARSL

96

Multi-unit

1.26 in (31.9 mm)

528 lbs/kft (786 kg/km)

760017616-ARSL

160

TS/OS Aluminum Armored LSZH

Product Number

Fiber Count Construction Type Outside Diameter Weight

5202 02/02A W/MHOR AHOR 4

Single Unit

0.56 in (14.1 mm)

101 lbs/kft (150 kg/km)

Material ID
760009001-AHOR

5202 02/04A W/MHOR AHOR 6

Single Unit

0.56 in (14.1 mm)

103 lbs/kft (153 kg/km)

760009019-AHOR

5202 02/06A W/MHOR AHOR 8

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (157 kg/km)

760009027-AHOR

5202 04/04A W/MHOR AHOR 8

Single Unit

0.56 in (14.1 mm)

106 lbs/kft (157 kg/km)

760009035-AHOR

5202 04/08A W/MHOR AHOR 12

Single Unit

0.56 in (14.1 mm)

109 lbs/kft (163 kg/km)

760009043-AHOR

5202 06/06A W/MHOR AHOR 12

Single Unit

0.56 in (14.1 mm)

109 lbs/kft (163 kg/km)

760009050-AHOR

5202 06/12A W/MHOR AHOR 18

Single Unit

0.66 in (16.6 mm)

109 lbs/kft (163 kg/km)

760019125-AHOR

5202 06/18A W/MHOR AHOR 24

Single Unit

0.66 in (16.6 mm)

151 lbs/kft (224 kg/km)

760019133-AHOR

5202 12/12A W/MHOR AHOR 24

Single Unit

0.66 in (16.6 mm)

151 lbs/kft (224 kg/km)

760019141-AHOR

5302 06/12A W/MHOR AHOR 18

Multi-unit

0.86 in (21.7 mm)

239 lbs/kft (355 kg/km)

760009068-AHOR

5302 06/18A W/MHOR AHOR 24

Multi-unit

0.91 in (23.0 mm)

273 lbs/kft (406 kg/km)

760009076-AHOR

5302 12/12A W/MHOR AHOR 24

Multi-unit

0.91 in (23.0 mm)

273 lbs/kft (406 kg/km)

760009084-AHOR

5302 12/24A W/MHOR AHOR 36

Multi-unit

0.91 in (23.0 mm)

275 lbs/kft (409 kg/km)

760009100-AHOR

5302 12/36A W/MHOR AHOR 48

Multi-unit

0.96 in (24.3 mm)

296 lbs/kft (440 kg/km)

760009126-AHOR

5302 24/24A W/MHOR AHOR 48

Multi-unit

0.96 in (24.3 mm)

296 lbs/kft (440 kg/km)

760009134-AHOR

5302 12/48A W/MHOR AHOR 60

Multi-unit

1.06 in (26.8 mm)

359 lbs/kft (535 kg/km)

760009142-AHOR

5302 12/60A W/MHOR AHOR 72

Multi-unit

1.11 in (28.1 mm)

414 lbs/kft (616 kg/km)

760009167-AHOR

5302 24/48A W/MHOR AHOR 72

Multi-unit

1.11 in (28.1 mm)

414 lbs/kft (616 kg/km)

760009159-AHOR

5302 36/36A W/MHOR AHOR 72

Multi-unit

1.11 in (28.1 mm)

414 lbs/kft (616 kg/km)

760009175-AHOR

161

Composite
Fiber

TeraSPEED/LazrSPEED
Composite Outdoor
Loose Tube Cable
The Dielectric Stranded Loose Tube Cable is constructed with
industry standard 3 mm buffer tubes, stranded around a central
strength member.
The Metallic Stranded Loose Tube Cable is armored with a
corrugated, polymer coated steel tape and constructed with
industry standard 3 mm buffer tubes, stranded around a
central strength member. The armor layer provides added
crush protection and meets the Telcordia requirements for
superior armored cable.
The buffer tubes are compatible with standard hardware, cable routing and fan-out kits. The individual gel-filled tubes with
water-blocking binders are placed between the central strength member and the tubes; then a water-blocking tape is formed
around the core. These cables provide a high level of protection for fiber installed in the outside plant environment where
mid-span access and cable management is required.

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)
Composite
Fiber

Physical Specifications:

Cable Jacket: UV Stabilized Black

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)
LazrSPEED50 micron
Buffer tubes and fibers are identified with standard color coding.

TS/LS 550 Dielectric

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5024 12/12A W/XXBK

24

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760036046

5024 24/24A W/XXBK

48

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760042242

5024 144/144A W/XXBK

288

0.86 in (21.8 mm)

192 lbs/kft (286 kg/km)

760039321

TS/LS 300 Dielectric

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5024 12/12A W/ZXBK

24

0.49 in (12.6 mm)

61 lbs/kft (91 kg/km)

760008722

5024 24/36A W/ZXBK

60

0.49 in (12.6 mm)

61 lbs/kft (91 kg/km)

760018457

5024 48/48A W/ZXBK

96

0.57 in (14.6 mm)

97 lbs/kft (145 kg/km)

760035857

5024 48/72A W/ZXBK

120

0.66 in (16.7 mm)

121 lbs/kft (180 kg/km)

760035840

5024 144/144A W/ZXBK

288

0.86 in (21.8 mm)

192 lbs/kft (286 kg/km)

760039339

TS/LS 150 Dielectric

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5024 48/48A W/HXBK

96

0.57 in (14.6 mm)

97 lbs/kft (145 kg/km)

760036038

162

TS/LS 300 Metallic

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5023 12/24A W/ZXBK

36

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760035824

5023 24/24A W/ZXBK

48

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760032813

5023 48/48A W/ZXBK

96

0.63 in (16.1 mm)

148 lbs/kft (220 kg/km)

760035873

5023 072/24A W/ZXBK

96

0.63 in (16.1 mm)

148 lbs/kft (220 kg/km)

760042457

5023 48/72A W/ZXBK

120

0.71 in (18.2 mm)

178 lbs/kft (266 kg/km)

760035865

TS/LS 150 Metallic

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5023 48/48A W/HXBK

96

0.63 in (16.1 mm)

148 lbs/kft (220 kg/km)

760036020
Composite
Fiber

163

TeraSPEED/LazrSPEED
Composite Outdoor
Central Tube Cable
The SYSTIMAX TeraSPEED/LazrSPEED Composite Fiber Optic
Outside Plant cable provides the ultimate in future proofing.
This combination of fibers provides the benefits of a Zero
Water Peak singlemode, and LazrSPEED Laser Optimized
Multimode Fiber (LOMMF), the leading 10 Gbps (OM3) fiber.
The incorporation of both singlemode and multimode fibers
under one jacket provides not only for seamless future migration
should the need arise, but also for improved installation time
and decreased installation expense. This central core composite
cable is reinforced with aramid yarn for superior strength.
SYSTIMAX central gel-filled core cables comply with the Telcordia Generic Requirements for Optical Fiber and Optical Fiber
Cable (GR-20-CORE), Section 6. These products also satisfy the requirements of ICEA S-87-640-1999, Optical Fiber Outside Plant
Communications Cable.

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)
Composite
Fiber

Physical Specifications:

Cable Jacket: UV Stabilized Black

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)
LazrSPEED50 micron
Buffer tubes and fibers are identified with standard color coding.

TS/LS 550 Dielectric

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5022 36/36A W/XXBK

72

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

760037804

TS/LS 300 Dielectric

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5022 06/06A W/ZXBK

12

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008318

5022 06/12A W/ZXBK

18

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008326

5022 12/12A W/ZXBK

24

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008334

5022 12/24A W/ZXBK

36

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008342

5022 24/24A W/ZXBK

48

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008359

5022 36/36A W/ZXBK

72

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

760036541

5022 48/48A W/ZXBK

96

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

760008367

TS/LS 150 Dielectric

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5022 16/16A W/HXBK

32

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760027797

164

TeraSPEED/OptiSPEED
Composite Outdoor
Loose Tube Cable
The Dielectric Stranded Loose Tube Cable is constructed with industry standard
3 mm buffer tubes, stranded around a central strength member.
The Metallic Stranded Loose Tube Cable is armored with a corrugated, polymer
coated steel tape and constructed with industry standard 3 mm buffer tubes,
stranded around a central strength member. The armor layer provides added crush
protection and meets the Telcordia requirements for superior armored cable.
The buffer tubes are compatible with standard hardware, cable routing and fan-out kits. The individual gel-filled tubes with
water-blocking binders are placed between the central strength member and the tubes; then a water-blocking tape is formed
around the core. These cables provide a high level of protection for fiber installed in the outside plant environment where
mid-span access and cable management is required.

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Cable Jacket: UV Stabilized Black

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)
OptiSPEED62.5 micron
Buffer tubes and fibers are identified with standard color coding.

Composite
Fiber

TS/OS Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5024 24/12A W/MXBK

36

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760039354

5024 36/12A W/MXBK

48

0.46 in (11.6 mm)

61 lbs/kft (91 kg/km)

760025395

5024 36/48A W/MXBK

84

0.57 in (14.6 mm)

97 lbs/kft (145 kg/km)

760008490

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5023 24/24A W/MXBK

48

0.51 in (13.1 mm)

102 lbs/kft (152 kg/km)

760034637

5023 48/48A W/MXBK

96

0.63 in (16.1 mm)

148 lbs/kft (220 kg/km)

760038299

TS/OS Metallic

165

TeraSPEED/OptiSPEED
Composite Outdoor
Central Tube Cable
The SYSTIMAX TeraSPEED/OptiSPEED Composite OSP Central Filled
Core Dielectric and Metallic cables incorporate the new TeraSPEED
singlemode fiber with the OptiSPEED multimode fiber, all under one
jacket. This provides a cost-effective alternative for those with modest
bandwidth requirements today, while allowing a seamless migration
to singlemode for future requirements.
Having both singlemode and multimode fibers under one jacket
provides not only for future migration should the need arise, but also for improved installation
time and decreased installation expense. SYSTIMAX central gel-filled core cables comply with the Telcordia Generic Requirements
for Optical Fiber and Optical Fiber Cable (GR-20-CORE), Section 6. These products also satisfy the requirements of ICEA S-87-640-1999,
Optical Fiber Outside Plant Communications Cable.

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:
Composite
Fiber

Cable Jacket: UV Stabilized Black

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)
OptiSPEED62.5 micron
Buffer tubes and fibers are identified with standard color coding.

TS/OS Dielectric
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5022 06/06A W/MXBK

12

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008250

5022 06/12A W/MXBK

18

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008268

5022 12/12A W/MXBK

24

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008276

5022 12/24A W/MXBK

36

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008284

5022 12/36A W/MXBK

48

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760010140

5022 24/24A W/MXBK

48

0.49 in (12.4 mm)

102 lbs/kft (152 kg/km)

760008292

5022 48/48A W/MXBK

96

0.57 in (14.4 mm)

127 lbs/kft (189 kg/km)

760008300

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5021 12/12A W/MXBK

24

0.43 in (11.0 mm)

92 lbs/kft (137 kg/km)

760031526

5021 12/24A W/MXBK

36

0.51 in (13.0 mm)

120 lbs/kft (179 kg/km)

760032854

TS/OS Metallic

166

TeraSPEED/LazrSPEED
Composite Indoor/Outdoor
Loose Tube Cable
The Plenum-Rated and Riser-Rated Indoor/Outdoor Stranded
Loose Tube Dielectric Cable allows for connectivity ease and
superior mid-span accessibility. The cable is designed to endure
the rigors of outdoor use, but can also be run directly in plenum
airspace or riser to eliminate a splice point at the building
entrance. The basic construction utilizes standard 3.0 mm
gel-filled (5124 Series) or dry-block (5125 Series) buffer
tubes which contain up to 12 optical fibers. Buffer tubes are
stranded around a rigid fiberglass central strength member
for protection against thermal expansion and contraction at
operational temperature extremes.
A fluoropolymer thermoplastic material is used for the outer jacket and buffer tubes to provide excellent petrochemical
resistance, flame propagation, and smoke generation properties that exceeds any similar cable design on the market today.
These cables are designed for installation loads up to 600 lbs (2700 N) and long term loads up to 180 lbs (800 N).
All cables meet the mechanical and environmental requirements of Telcordia GR-20-CORE Issue 2 Generic Requirements for
Optical Fiber and Optical Fiber Cable and ANSI/ICEA S-87-640 Standard for Optical Fiber Outside Plan Communications Cable.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR

Environmental and Mechanical Specifications:

Composite
Fiber

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Cable Jacket: UV Stabilized Black

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)
LazrSPEED50 micron
Buffer tubes and fibers are identified with standard color coding.

TS/LS 550 Plenum

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5125 06/06A W/XPBK

12

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017137

5125 12/12A W/XPBK

24

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017145

5125 12/24A W/XPBK

36

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017152

5125 24/24A W/XPBK

48

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017160

5125 24/48A W/XPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760017178

5125 36/36A W/XPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760017186

167

TS/LS 300 Plenum

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5125 06/06A W/ZPBK

12

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017095

5125 12/24A W/ZPBK

36

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017103

5125 36/36A W/ZPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760017111

TS/LS 150 Plenum

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5125 06/06A W/HPBK

12

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017020

5125 12/12A W/HPBK

24

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017038

5125 12/24A W/HPBK

36

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017046

5125 24/24A W/HPBK

48

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760017053

5125 24/48A W/HPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760017061

5125 36/36A W/HPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760017079

TS/LS 300 Riser

Composite
Fiber

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5124 06/06A W/ZRBK

12

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760008433

5124 12/12A W/ZRBK

24

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760008441

5124 12/24A W/ZRBK

36

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760008458

5124 24/24A W/ZRBK

48

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760008466

5124 36/36A W/ZRBK

72

0.53 in (13.6 mm)

115 lbs/kft (172 kg/km)

760008474

5124 48/48A W/ZXBK

96

0.62 in (15.7 mm)

152 lbs/kft (226 kg/km)

760008482

Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5124 12/06A W/HRBK

18

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760026807

TS/LS 150 Riser

168

TeraSPEED/LazrSPEED
Composite Indoor/Outdoor
Tight Buffered Cable
Indoor/Outdoor Fiber Optic Cable is a totally dry and waterproof
central core cable. It does not contain any gel, filling or flooding
compound, grease or other flammable water blocking fluids.
The Low Smoke Zero Halogen (LSZH) Fiber Optic Indoor/
Outdoor Cable is built to the International ISO/IEC
specifications and features a LSZH design. The UV protected
Fiber Optic Indoor/Outdoor Cable is totally halogen free
and flame retardant (self-extinguishing).
Indoor/Outdoor Cables use aramid yarns for strength in conjunction with a glass reinforced
polymer (GRP) central strength member (CSM). The aramid yarns are specially prepared with an agent that provides the
waterproof attribute of the Indoor/Outdoor cables.
Because of the use of buffered fibers rather than coated fibers, connectorization does not require buffer tubing. The absence of
gel, filling compound, flooding compound, grease or other flammable water blocking fluids further guarantee an easy and clean
connectorization process.

Environmental and Mechanical Specifications:

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Composite
Fiber

Physical Specifications:

Cable Jacket: UV Stabilized Black

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)
LazrSPEED50 micron
Fibers are identified with standard color coding.

TS/LS 550 LSZH

Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5105 12/12A W/XHBK

24

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

760025460

Multi-unit

TS/LS 300 LSZH

Product Number

Fiber Count Construction Type

Outside Diameter

Weight

Material ID

5102 06/06A W/ZHBK

12

0.28 in (7.1 mm)

31 lbs/kft (47 kg/km)

760025411

Single Unit

5105 12/12A W/ZHBK

24

Multi-unit

0.67 in (16.9 mm)

133 lbs/kft (198 kg/km)

760025429

5105 24/24A W/ZHBK

48

Multi-unit

0.79 in (20.0 mm)

198 lbs/kft (295 kg/km)

760025437

169

TeraSPEED/OptiSPEED
Composite Indoor/Outdoor
Loose Tube Cable
The Plenum-Rated and Riser-Rated Indoor/Outdoor Stranded Loose
Tube Dielectric Cable allows for connectivity ease and superior
mid-span accessibility. The cable is designed to endure the rigors
of outdoor use, but can also be run directly in plenum airspace or
riser to eliminate a splice point at the building entrance. The basic
construction utilizes standard 3.0 mm gel-filled (5124 Series) or
dry-block (5125 Series) buffer tubes which contain up to 12 optical
fibers. Buffer tubes are stranded around a rigid fiberglass central
strength member for protection against thermal expansion and
contraction at operational temperature extremes.
A fluoropolymer thermoplastic material is used for the outer jacket and buffer tubes to provide excellent petrochemical resistance, flame propagation, and smoke generation properties that exceeds any similar cable design on the market today. These
cables are designed for installation loads up to 600 lbs (2700 N) and long term loads up to 180 lbs (800 N).
All cables meet the mechanical and environmental requirements of Telcordia GR-20-CORE Issue 2 Generic Requirements for
Optical Fiber and Optical Fiber Cable and ANSI/ICEA S-87-640 Standard for Optical Fiber Outside Plan Communications Cable.
The Plenum cable is (UL and cUL) TYPE OFNP
The Riser cable is (UL and cUL) TYPE OFNR

Environmental and Mechanical Specifications:

Composite
Fiber

Operating Temperature: -40F to 158F (-40C to 70C) (Test Method: FOTP 3)

Installation Temperature: -22F to 140F (-30C to 60C)
Storage Temperature: -40F to 167F (-40C to 75C)
Crush Resistance: 250 lbf/in (44 N/mm) (Test Method: FOTP 41)
Impact Resistance: Exceeds (Test Method: FOTP 25)
Flexing: Exceeds 25 cycles (Test Method: FOTP 104)
Twist Bend: Exceeds (Test Method: FOTP 85)

Physical Specifications:

Cable Jacket: UV Stabilized Black

Core Size: TeraSPEED8.3 micron ( 9 micron mode field diameter)
OptiSPEED62.5 micron
Buffer tubes and fibers are identified with standard color coding.

TS/OS Plenum
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5125 06/06A W/MPBK

12

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016956

5125 12/12A W/MPBK

24

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016964

5125 12/24A W/MPBK

36

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016972

5125 24/24A W/MPBK

48

0.43 in (11.0 mm)

78 lbs/kft (116 kg/km)

760016980

5125 24/48A W/MPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760016998

5125 36/36A W/MPBK

72

0.47 in (11.9 mm)

92 lbs/kft (136 kg/km)

760017004

170

TS/OS Riser
Product Number

Fiber Count

Outside Diameter

Weight

Material ID

5124 06/06A W/MRBK

12

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760008375

5124 12/12A W/MRBK

24

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760008383

5124 12/24A W/MRBK

36

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760008391

5124 24/24A W/MRBK

48

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760008409

5124 36/24A W/MRBK

60

0.49 in (12.6 mm)

99 lbs/kft (148 kg/km)

760036897

5124 36/36A W/MRBK

72

0.53 in (13.6 mm)

115 lbs/kft (172 kg/km)

760008417

5124 48/48A W/MRBK

96

0.62 in (15.7 mm)

152 lbs/kft (226 kg/km)

760008425

5124 96/72A W/MRBK

168

0.80 in (20.5 mm)

229 lbs/kft (341 kg/km)

760033233

Composite
Fiber

171

Composite
Fiber

172

InstaPATCH Plus Fiber System

InstaPATCH Plus Equipment
and Cross-Connect Cords
InstaPATCH Plus
Trunk Cables

InstaPATCH Plus
Modular and HighDensity Shelves

InstaPATCH Plus
Ruggedized
Fanout Cables
InstaPATCH Plus

The SYSTIMAX InstaPATCH Plus System features a high-density, factory terminated, factory tested, modular fiber connectivity solution
that allows installers to simply and quickly connect system components together. This modular system approach enables 96
fibers to be ready for service in the time it takes to make a single fiber connection with traditional systems.
Developed by SYSTIMAX Labs, the InstaPATCH Plus System is designed to support locations, such as data centers, that require
high-density, rapid deployment and high performance. The InstaPATCH Plus System incorporates SYSTIMAX LazrSPEED multimode
and TeraSPEED singlemode fiber technologies to support todays most demanding applications, while allowing easy migration to
the next generation technology.
The InstaPATCH Plus System includes pre-terminated hardware, pre-terminated backbone trunk cables, ruggedized MPO-single
fiber fanout patch cords and standard fiber patch cords. The InstaPATCH Plus System utilizes one common module, one common
rugged fanout, standard fiber patch cords, and retains the full benefits of easy installation and system administration, while maintaining a future upgrade path to parallel connectivity. Moreover, the InstaPATCH Plus System features an improved labeling system
that is accurate and logical when positioned in four orientations, affording more flexibility in design, installation and application.
Pre-terminated with MPO connectors and offered in customer-specified lengths, the InstaPATCH Plus trunk cables are offered in
12, 24, 48, 72, 96, and 144 fibers. Solutions supported are:
LazrSPEED 300
LazrSPEED 150
TeraSPEED

173

InstaPATCH
Plus

InstaPATCH Plus
Modular Shelf and
DM2 Modules
The InstaPATCH Modular Series includes unpopulated shelves and
DM2 modules. The modular design allows fast moves and changes
of the optical data network.
The options of the unpopulated shelf include a 1U 19 inch panel,
1U 19 inch shelf and a 4U 19 inch shelf, that house pre-terminated
DM2 modules. Eight versions of pre-terminated modules are
offered: LC, SC, ST and a double density LC, each available in LazrSPEED multimode (LS)
or TeraSPEED singlemode (SM) options.
The InstaPATCH Plus DM2 module can be fitted in any combination in 1U panel, 1U
shelf and 4U shelf. In addition, MPO panels and blank panels, with the same footprint
as the DM2 modules, are also available to support additional configurations.
Each DM2 module has a dual polarity labeling scheme, to allow the use of a single module for
each end of the InstaPATCH Plus channel.

Features and Benefits:

InstaPATCH
Plus

12-fiber MPO connector based modular design enables simple connections

DM2 modules are constructed with LazrSPEED 300 fibers or TeraSPEED ZWP fibers
to provide headroom for future system upgrades
Factory-terminated and tested modules for instant field connections and guaranteed
quality and performance
Designed for administrative convenienceguaranteed transmit-to-receive connectivity
No special or non-standard polarity components
Supports easy reconfiguration for moves, adds, and changes
Easy upgrade path to parallel connectivity and associated applications, while preserving most of investment
Automatic shutters for LC adapters

InstaPATCH MP-1U Panel and InstaPATCH MS-1U Shelf

The 1U panel and 1U shelf can house any combination of up to 3 InstaPATCH Plus DM2 modules to achieve up to 72 fiber
terminations per unit. In addition, MS-1U provides ample space for storing up to 2 meters of cable slack inside the shelf.
The 1U panel and shelf are equipped with a front trough for patch cord management that provides ample room for labeling. The
MP-1U panel comes with conversion brackets for mounting on a 19, 23 or ETSI rack. The InstaPATCH MP-1U also includes a rear
cable management bar, labels for network mapping, mounting hardware and installation instructions.

InstaPATCH MS-4U Shelf

The 4U shelf houses any combination up to 12 InstaPATCH Plus DM2 modules to achieve up to 288 fiber terminations per shelf. It
can be mounted either on a 19, 23 or ETSI rack. The InstaPATCH MS-4U includes trunk cable storage clips, labels for network
mapping, mounting hardware and installation instructions.

InstaPATCH Plus DM2-12LC-LS / -SM Module

This module features 6 pre-installed duplex LC adapters at the front routed to a pre-installed 12-fiber MPO adapter at the back.
As with the InstaPATCH Plus DS2-LC shelf, this module features spring-loaded shutters for improved dust prevention and
occupational safety.

InstaPATCH Plus DM2-24LC-LS / -SM Module

This module features 12 pre-installed duplex LC adapters at the front routed to 2 pre-installed 12-fiber MPO adapters at the back.
As with the InstaPATCH Plus DS2-LC shelf, this high-density module features spring-loaded shutters for improved dust prevention.

InstaPATCH Plus DM2-12SC-LS / -SM Module

This module features 6 pre-installed duplex SC adapters routed to a pre-installed 12-fiber MPO adapter at the back. The duplex SC
adapter includes two easy-pull protective dust caps.

174

InstaPATCH Plus DM2-12ST-LS / -SM Module:

This module features 12 simplex ST adapters routed to a pre-installed 12-fiber MPO adapter at the back. The ST adapter includes a
protective dust cap.

InstaPATCH Plus DM-MPO Module:

The MPO module features a panel equipped with either 2 or 6 MPO adapters. The module allows for direct connections with MPO
equipment for parallel applications.

Physical Specifications:
Height:
Width:
Depth:
Listing:

MP-1U Panel
1.7 in (4.37 cm)
19.0 in (48.3 cm)
9.7 in (24.6 cm)
UL

MS-4U Shelf
7.0 in (17.8 cm)
17.0 in (43.2 cm)
11.0 in (27.9 cm)
UL

DM2 ModulesLC, SC, ST

1.1 in (2.9 cm)
5.1 in (13.0 cm)
5.0 in (12.8 cm)
UL

Optical Performance:
Module
Component

LazrSPEED
Total Insertion Return
Loss
Loss

TeraSPEED
Total Insertion
Loss

Return
Loss

DM2-LC Modules

1.15 dB

20 dB

1.15 dB

55 dB

DM2-SC Modules

1.3 dB

20 dB

1.3 dB

55 dB

DM2-ST Modules

1.3 dB

20 dB

1.3 dB

55 dB

InstaPATCH Plus Modular Panels/Shelves

Detailed Description

Material ID

InstaPATCH MP-1U modular panel, supports 3 DM2 modules (not included)

760013458

InstaPATCH MS-1U modular shelf, supports 3 DM2 modules (not included)

760033787

InstaPATCH MS-4U modular shelf, supports 12 DM2 modules (not included)

760013722

InstaPATCH Plus DM2 Modules

Detailed Description

Material ID

InstaPATCH Plus DM2-12LC-LS module

760039727

InstaPATCH Plus DM2-12LC-SM module

760039743

InstaPATCH Plus DM2-12SC-LS module

760039768

InstaPATCH Plus DM2-12SC-SM module

760039784

InstaPATCH Plus DM2-12ST-LS module

760039800

InstaPATCH Plus DM2-12ST-SM module

760039826

InstaPATCH Plus DM2-24LC-LS module

760039685

InstaPATCH Plus DM2-24LC-SM module

760039701

InstaPATCH Plus DM2-2MPO module

760015412

InstaPATCH Plus DM2-6MPO module

760034280

Blank panel for MP-1U and MS-4U, 6/pk

760016063

175

InstaPATCH
Plus

InstaPATCH Plus
Pre-terminated
Shelves
Available in both LazrSPEED and TeraSPEED Solutions, the
InstaPATCH Plus pre-terminated shelf series features
pre-terminated, one unit (1U) height LC and SC
shelves. The high-density shelves feature 48 and 96 LC
connections or 48 SC connections, up to twice that of standard shelves. The InstaPATCH Plus
pre-terminated shelves are rack mountable, with a sliding tray for easy access to front side connectors.
The shelf includes a top cover and a patch cord management trough that provides ample room for labeling. The InstaPATCH Plus
high-density 1U shelf can be mounted either on a 19, 23 or ETSI rack via extension brackets.

Features and Benefits:

Slide-out tray ensures the highest usable density on the market 96LC in 1U
Shelves are constructed with LazrSPEED 300 fibers or TeraSPEED ZWP fibers to provide headroom for future system upgrades
Factory-terminated and tested shelves for instant field connections and guaranteed quality and performance
Designed for administrative convenience guaranteed transmit-to-receive connectivity
Easy upgrade path to parallel connectivity and associated applications
Improved patch cord management and system labeling capabilities
Automatic shutters for LC adapters

InstaPATCH Plus DS2 Pre-terminated LC Shelf

The high-density LC shelf features 48 pre-installed duplex LC adapters at the front panel routed to 8 pre-installed 12-fiber MPO
adapters at the rear of the shelf. The alternative high-density LC shelf includes 24 pre-installed duplex LC adapters at the front
panel routed to 4 pre-installed 12-fiber MPO adapters at the rear of the shelf. Also featured are automatic shutters for LC adapters
to minimize dust contamination. The InstaPATCH DS shelves also include a rear trunk cable management bar with slack storage
coils, labels for network mapping, mounting hardware and installation instructions.

InstaPATCH Plus DS2-48SC Pre-terminated Shelf

InstaPATCH
Plus

The high-density SC shelf features 24 pre-installed duplex SC adapters at the front panel, routed to 4 pre-installed 12-fiber MPO
adapters at the rear of the shelf. The InstaPATCH DS shelves also include a rear trunk cable management bar with slack storage
coils, labels for network mapping, mounting hardware and installation instructions.

Physical Specifications:

Height: 1.7 in (4.37 cm)

Width: 17.2 in (43.7 cm)
Depth: 16.2 in (41.1 cm)*
Listing: UL
*The depth of the DS shelf includes the front jumper trough and rear cable management features.

Optical Performance:
Module Component

LazrSPEED Total Insertion Loss

Return Loss

TeraSPEED Total Insertion Loss

Return Loss

1U LC DS Shelf

1.15 dB

20 dB

1.15 dB

55 dB

1U SC DS Shelf

1.3 dB

20 dB

1.3 dB

55 dB

LC DM Module

1.15 dB

20 dB

1.15 dB

55 dB

SC DM Module

1.3 dB

20 dB

1.3 dB

55 dB

ST DM Module

1.3 dB

20 dB

1.3 dB

55 dB

Detailed Description

Material ID

InstaPATCH Plus DS2-96LC-LS high-density shelf

760040246

InstaPATCH Plus DS2-96LC-SM high-density shelf

760040329

InstaPATCH Plus DS2-48LC-LS high-density shelf

760040261

InstaPATCH Plus DS2-48LC-SM high-density shelf

760040303

InstaPATCH Plus DS2-48SC-LS high-density shelf

760040220

InstaPATCH Plus DS2-48SC-SM high-density shelf

760040303

176

InstaPATCH Plus
Pre-terminated
Cables and Cords
The SYSTIMAX InstaPATCH Plus System features a high-density,
factory-terminated, factory tested, modular fiber connectivity
solution that allows installers to simply and quickly connect
system components together.
Developed by SYSTIMAX Labs, the InstaPATCH Plus System
is designed to support locations, such as data centers, that
require high-density, rapid deployment and high performance.
The InstaPATCH Plus System incorporates SYSTIMAX LazrSPEED
multimode and TeraSPEED singlemode fiber technologies to support todays most
demanding applications, while allowing easy migration to next generation technology.

InstaPATCH Plus Trunk Cables

InstaPATCH Plus trunk cables are offered in LazrSPEED 150, LazrSPEED 300 and TeraSPEED Solutions. Two cable constructions are
offered: the InstaPATCH-IPR and the InstaPATCH-IPD trunk cables.
The InstaPATCH-IPR trunk cables are constructed from 12 fiber ribbons in flat sheaths and available in 12 or 24 fiber versions. They
are plenum-rated and are factory-terminated on both ends with 12 fiber female MPO connections.
The InstaPATCH-IPD trunk cables are round and offered in 12, 24, 48, 72, 96 and 144 fibers. The cable is constructed with multiple
subunits, each with 12 fibers and is terminated on both ends with MPO 12-fiber connectors. There is no splicing within the cable,
and each group of 12 fibers is protected by over-sheath. The lengths of the breakout over-sheaths are staggered for easy routing
and handling. The maximum length of the breakout over-sheath is 33 inches from the transition point.
All IPD cables and the 12 fiber IPR cable can be ordered with or without a pulling eye.

Features and Benefits:

Available in LazrSPEED 150, LazrSPEED 300 and TeraSPEED Solutions

12 fiber MPO connector-based modular design enables simple connections
Factory terminated and tested trunk cables for instant field connections and guaranteed quality and performance
Designed for administrative convenience guaranteed transmit-to-receive connectivity
Supports easy reconfiguration for moves, adds and changes
Easy upgrade path to parallel connectivity and associated applications, while preserving most of the investment

InstaPATCH Plus Equipment Cords

The InstaPATCH Plus equipment cords, offered in both LazrSPEED 300 and TeraSPEED Solutions, are used to connect hardware
using parallel transceivers to trunk cables. The InstaPATCH Plus equipment cords are constructed with a 12 fiber ribbon cable and
provide a female MPO connector on one end to attach to a transceiver and a male MPO on the other end to attach to a trunk
cable through a DM-2PO or a DM-6MPO module. The cords are custom built and can be ordered to specific lengths in feet or
meters.

InstaPATCH Plus Cross-Connect Cords

The InstaPATCH Plus cross-connect cords, offered in LazrSPEED 300, LazrSPEED 150 and TeraSPEED Solutions, are used to
cross-connect trunk cables at the patch panel for convenient administration of groups of twelve fibers at a time. The InstaPATCH
Plus cross-connect cords are constructed with a 12 fiber ribbon cable and provide male MPO connectors on both ends to
cross-connect trunk cables through DM-2MPO or a DM-6MPO modules. The cords are custom built and can be ordered to
specific lengths in feet or meters.

177

InstaPATCH
Plus

Cable Specifications:
Attenuation, max:
IPR:

LazrSPEED 150

LazrSPEED 300

TeraSPEED

3.5 dB/km @ 850 nm

3.5 dB/km @ 850 nm

0.5 dB/km @ 1,310 nm

1.5 dB/km @ 1,300 nm

1.5 dB/km @ 1,300 nm

0.5 dB/km @ 1,385 nm

0.5 dB/km @ 1,550 nm

IPD:

3.0 dB/km @ 850 nm

3.0 dB/km @ 850 nm

1.0 dB/km @ 1,300 nm

1.0 dB/km @ 1,300 nm

0.35 dB/km @ 1,310 nm

0.32 dB/km @ 1,382 nm
0.24 dB/km @ 1,550 nm

Minimum Bandwidth, MHz-km:

Overfilled:
Laser:

InstaPATCH
Plus

700 @ 850 nm

1,500 @ 850 nm

500 @ 1,300 nm

500 @ 1,300 nm

N/A
N/A

950 @ 850 nm

2,000 @ 850 nm

N/A

500 @ 1,300 nm

500 @ 1,300 nm

N/A

Cable Dimension, mm, Cross-Section:

12 Fiber Single Ribbon 2.50 x 4.70
24 Fiber Dual Ribbon
2.50 x 9.40
24 Fiber Multi-unit
3.9 x 6.9 (oval)
48 Fiber Multi-unit
9.1
72 Fiber Multi-unit
10.7
96 Fiber Multi-unit
12.3
144 Fiber Multi-unit
13.1
Cable Listing: OFNP (UL) OFN FT-6 (CSA) LSZH
Temperature Range: 32F to 158F (0C to 70C)
Tensile Rating: Ribbon IPR: 670 N (150 lbs)
Distribution IPD - 670-2670 N (150-600 lbs)
Minimum Bending Radius: 20X Cable OD During Installation
10X Cable OD After Installation
MPO Connector Type: Trunk - female
Equipment - female/male
Cross-connect - male
Total Termination Insertion Loss per Trunk Cable: < 1.45 dB
Mating Durability (per EIA 455-21A): < 0.2 dB change 1,000 remate
Return Loss: 20 dB change 1,000 remate for MM
55 dB change 1,000 remate for SM

Detailed Description

FPC Code

LazrSPEED 150 IPR MPO(f )-MPO(f ) Trunk Cable, 12 Fiber Ribbon, Plenum

FPCHMPMP9A-P

LazrSPEED 150 IPR MPO(f )-MPO(f ) Trunk Cable, 12 Fiber Ribbon, Plenum, with Pulling Eye

FPCHMPMP9A-E

LazrSPEED 150 IPR MPO(f )-MPO(f ) Trunk Cable, 2x12 Fiber Ribbon, Plenum

FPCHMPMP9B-P

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 24 Fiber Multi-unit Cable, Plenum

FPCHMPMP6D-P

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 24 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCHMPMP6D-E

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 48 Fiber Multi-unit Cable, Plenum

FPCHMPMP6E-P

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 48 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCHMPMP6E-E

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 72 Fiber Multi-unit Cable, Plenum

FPCHMPMP6F-P

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 72 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCHMPMP6F-E

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 96 Fiber Multi-unit Cable, Plenum

FPCHMPMP6G-P

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 96 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCHMPMP6G-E

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 144 Fiber Multi-unit Cable, Plenum

FPCHMPMP6H-P

178

Detailed Description

FPC Code

LazrSPEED 150 IPD MPO(f )-MPO(f ) Trunk Cable, 144 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCHMPMP6H-E

LazrSPEED 300 IPR MPO(f )-MPO(f ) Trunk Cable, 12 Fiber Ribbon, Plenum

FPCZMPMP9A-P

LazrSPEED 300 IPR MPO(f )-MPO(f ) Trunk Cable, 12 Fiber Ribbon, Plenum, with Pulling Eye

FPCZMPMP9A-E

LazrSPEED 300 IPR MPO(f )-MPO(f ) Trunk Cable, 2x12 Fiber Ribbon, Plenum

FPCZMPMP9B-P

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 24 Fiber Multi-unit Cable, Plenum

FPCZMPMP6D-P

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 24 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCZMPMP6D-E

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 48 Fiber Multi-unit Cable, Plenum

FPCZMPMP6E-P

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 48 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCZMPMP6E-E

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 72 Fiber Multi-unit Cable, Plenum

FPCZMPMP6F-P

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 72 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCZMPMP6F-E

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 96 Fiber Multi-unit Cable, Plenum

FPCZMPMP6G-P

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 96 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCZMPMP6G-E

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 144 Fiber Multi-unit Cable, Plenum

FPCZMPMP6H-P

LazrSPEED 300 IPD MPO(f )-MPO(f ) Trunk Cable, 144 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCZMPMP6H-E

TeraSPEED IPR MPO(f )-MPO(f ) Trunk Cable, 12 Fiber Ribbon, Plenum

FPCWMPMP9A-P

TeraSPEED IPR MPO(f )-MPO(f ) Trunk Cable, 12 Fiber Ribbon, Plenum, with Pulling Eye

FPCWMPMP9A-E

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 24 Fiber Multi-unit Cable, Plenum

FPCWMPMP6D-P

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 24 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCWMPMP6D-E

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 48 Fiber Multi-unit Cable, Plenum

FPCWMPMP6E-P

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 48 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCWMPMP6E-E

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 72 Fiber Multi-unit Cable, Plenum

FPCWMPMP6F-P

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 72 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCWMPMP6F-E

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 96 Fiber Multi-unit Cable, Plenum

FPCWMPMP6G-P

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 96 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCWMPMP6G-E

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 144 Fiber Multi-unit Cable, Plenum

FPCWMPMP6H-P

TeraSPEED IPD MPO(f )-MPO(f ) Trunk Cable, 144 Fiber Multi-unit Cable, Plenum, with Pulling Eye

FPCWMPMP6H-E

LazrSPEED 300 IPR MPO(f )-MPO(m) 12 Fiber Ribbon Equipment Cord, Plenum

FPCZMPMX9A-P

LazrSPEED 150 IPR MPO(m)-MPO(m) 12 Fiber Ribbon Cross-connect Cord, Plenum

FPCHMXMX9A-P

LazrSPEED 300 IPR MPO(m)-MPO(m) 12 Fiber Ribbon Cross-connect Cord, Plenum

FPCZMXMX9A-P

179

InstaPATCH
Plus

InstaPATCH Plus
Ruggedized Fanout
Cable
The InstaPATCH Plus ruggedized fanout cables support direct
connection to equipment from the patch panel. Terminated
with MPO connectors on one end and clipped duplex connectors
(LC, SC or ST) on the other end, the ruggedized fanout cable
is designed for use with InstaPATCH Plus modular shelves and
MPO panels.
The ruggedized fanouts are available in LazrSPEED 300
and TeraSPEED Solutions, in 12, 24, 48 and 72 fiber counts.
The fanout is built with either InstaPATCH IPR (ribbon) or
InstaPATCH IPD (12 fiber subunit distribution cable), and
furcated to individual fiber legs, terminated with individual connectors. Each fiber leg is
protected with aramid yarn and 2.0 mm furcation tubing for rugged applications.
Ruggedized fanout cables can be ordered in custom length, with or without a pulling eye on the MPO end. The length of the
furcated legs is approximately 48 inches from the connector end.

Features and Benefits:

12 fiber MPO connector based modular design enables simple connections
Ruggedized fanouts are constructed with LazrSPEED 300 fibers or TeraSPEED ZWP fibers to provide headroom for future
system upgrades
Provide ultra high-density patching to achieve maximum density of 216 individual fibers in 1U
Factory-terminated and tested for instant field connections and guaranteed quality and performance
Designed for administrative convenienceguaranteed transmit-to-receive connectivity
No special or non-standard polarity components

Optical Performance:
InstaPATCH
Plus

Module Component

LazrSPEED Total Insertion Loss

Return Loss

TeraSPEED Total Insertion Loss

Return Loss

LC Ruggedized Fanout

1.15 dB

20 dB

1.15 dB

55 dB

SC Ruggedized Fanout

1.3 dB

20 dB

1.3 dB

55 dB

ST Ruggedized Fanout

1.3 dB

20 dB

1.3 dB

55 dB

Detailed Description

FPC Code

LazrSPEED 300 12 Fiber IPR MPO(m)-LC, Plenum

FPCZMXLCYA-P

LazrSPEED 300 12 Fiber IPR MPO(m)-LC, Plenum, with Pulling Eye

FPCZMXLCYA-E

LazrSPEED 300 24 Fiber IPD MPO(m)-LC, Plenum

FPCZMXLCYD-P

LazrSPEED 300 24 Fiber IPD MPO(m)-LC, Plenum, with Pulling Eye

FPCZMXLCYD-E

LazrSPEED 300 48 Fiber IPD MPO(m)-LC, Plenum

FPCZMXLCYE-P

LazrSPEED 300 48 Fiber IPD MPO(m)-LC, Plenum, with Pulling Eye

FPCZMXLCYE-E

LazrSPEED 300 72 Fiber IPD MPO(m)-LC, Plenum

FPCZMXLCYF-P

LazrSPEED 300 72 Fiber IPD MPO(m)-LC, Plenum, with Pulling Eye

FPCZMXLCYF-E

LazrSPEED 300 12 Fiber IPR MPO(m)-SC, Plenum

FPCZMXSCYA-P

LazrSPEED 300 12 Fiber IPR MPO(m)-SC, Plenum, with Pulling Eye

FPCZMXSCYA-E

LazrSPEED 300 24 Fiber IPD MPO(m)-SC, Plenum

FPCZMXSCYD-P

LazrSPEED 300 24 Fiber IPD MPO(m)-SC, Plenum, with Pulling Eye

FPCZMXSCYD-E

LazrSPEED 300 48 Fiber IPD MPO(m)-SC, Plenum

FPCZMXSCYE-P

LazrSPEED 300 48 Fiber IPD MPO(m)-SC, Plenum, with Pulling Eye

FPCZMXSCYE-E

180

Detailed Description

FPC Code

LazrSPEED 300 72 Fiber IPD MPO(m)-SC, Plenum

FPCZMXSCYF-P

LazrSPEED 300 72 Fiber IPD MPO(m)-SC, Plenum, with Pulling Eye

FPCZMXSCYF-E

LazrSPEED 300 12 Fiber IPR MPO(m)-STII+, Plenum

FPCZMXEPYA-P

LazrSPEED 300 12 Fiber IPR MPO(m)-STII+, Plenum, with Pulling Eye

FPCZMXEPYA-E

LazrSPEED 300 24 Fiber IPD MPO(m)-STII+, Plenum

FPCZMXEPYD-P

LazrSPEED 300 24 Fiber IPD MPO(m)-STII+, Plenum, with Pulling Eye

FPCZMXEPYD-E

LazrSPEED 300 48 Fiber IPD MPO(m)-STII+, Plenum

FPCZMXEPYE-P

LazrSPEED 300 48 Fiber IPD MPO(m)-STII+, Plenum, with Pulling Eye

FPCZMXEPYE-E

LazrSPEED 300 72 Fiber IPD MPO(m)-STII+, Plenum

FPCZMXEPYF-P

LazrSPEED 300 72 Fiber IPD MPO(m)-STII+, Plenum, with Pulling Eye

FPCZMXEPYF-E

TeraSPEED 12 Fiber IPR MPO(m)-LC, Plenum

FPCWMXLCYA-P

TeraSPEED 12 Fiber IPR MPO(m)-LC, Plenum, with Pulling Eye

FPCWMXLCYA-E

TeraSPEED 24 Fiber IPD MPO(m)-LC, Plenum

FPCWMXLCYD-P

TeraSPEED 24 Fiber IPD MPO(m)-LC, Plenum, with Pulling Eye

FPCWMXLCYD-E

TeraSPEED 48 Fiber IPD MPO(m)-LC, Plenum

FPCWMXLCYE-P

TeraSPEED 48 Fiber IPD MPO(m)-LC, Plenum, with Pulling Eye

FPCWMXLCYE-E

TeraSPEED 72 Fiber IPD MPO(m)-LC, Plenum

FPCWMXLCYF-P

TeraSPEED 72 Fiber IPD MPO(m)-LC, Plenum, with Pulling Eye

FPCWMXLCYF-E

TeraSPEED 12 Fiber IPR MPO(m)-SC, Plenum

FPCWMXSCYA-P

TeraSPEED 12 Fiber IPR MPO(m)-SC, Plenum, with Pulling Eye

FPCWMXSCYA-E

TeraSPEED 24 Fiber IPD MPO(m)-SC, Plenum

FPCWMXSCYD-P

TeraSPEED 24 Fiber IPD MPO(m)-SC, Plenum, with Pulling Eye

FPCWMXSCYD-E

TeraSPEED 48 Fiber IPD MPO(m)-SC, Plenum

FPCWMXSCYE-P

TeraSPEED 48 Fiber IPD MPO(m)-SC, Plenum, with Pulling Eye

FPCWMXSCYE-E

TeraSPEED 72 Fiber IPD MPO(m)-SC, Plenum

FPCWMXSCYF-P

TeraSPEED 72 Fiber IPD MPO(m)-SC, Plenum, with Pulling Eye

FPCWMXSCYF-E

TeraSPEED 12 Fiber IPR MPO(m)-STII+, Plenum

FPCWMXEPYA-P

TeraSPEED 12 Fiber IPR MPO(m)-STII+, Plenum, with Pulling Eye

FPCWMXEPYA-E

TeraSPEED 24 Fiber IPD MPO(m)-STII+, Plenum

FPCWMXEPYD-P

TeraSPEED 24 Fiber IPD MPO(m)-STII+, Plenum, with Pulling Eye

FPCWMXEPYD-E

TeraSPEED 48 Fiber IPD MPO(m)-STII+, Plenum

FPCWMXEPYE-P

TeraSPEED 48 Fiber IPD MPO(m)-STII+, Plenum, with Pulling Eye

FPCWMXEPYE-E

TeraSPEED 72 Fiber IPD MPO(m)-STII+, Plenum

FPCWMXEPYF-P

TeraSPEED 72 Fiber IPD MPO(m)-STII+, Plenum, with Pulling Eye

FPCWMXEPYF-E

181

InstaPATCH
Plus

InstaPATCH Plus Trunk Cables

FPC

Fiber
Patch Cord

bb

cc

Termination End
One

e -

hhh

Cordage Size

Jacket Type

Length

MP MPO (female)

6 Multi-fiber Subunit
Loose Tube Cable

P Plenum (Std Color)

001-XXX

MX MPO (male)

9 Ribbon Cable (IPR)

Termination End
Two

Fiber Type
H LazrSPEED 150
Multimode

MP MPO (female)
MX MPO (male)

Z LazrSPEED 300
Multimode

E Plenum, with
Pulling Eye

Number of Ends

Unit of Measure

A 12 Fiber Ribbon

F Feet

B 2 x 12 Ribbon

M Meters

D 24 Fiber IPD
E 48 Fiber IPD

W TeraSPEED
Singlemode

F 72 Fiber IPD
G 96 Fiber IPD
H 144 Fiber IPD

InstaPATCH
Plus

InstaPATCH Plus Patch Cords

FPC

Fiber
Patch Cord

bb

cc

Termination End
One
MP MPO (female)
MX MPO (male)
LC LC

e -

Jacket Type

Length

R Riser (Std Color)

001-XXX

3 3.0 mm Cord

P Plenum (Std Color)

9 Ribbon Cable (IPR)

E Plenum, with
Pulling Eye

Unit of Measure
F Feet

Fiber Type

Z LazrSPEED 300
Multimode
X LazrSPEED 550
Multimode
W TeraSPEED SM

M Meters

Termination End
Two
MP MPO (female)
MX MPO (male)
LC LC
SC SC
EP STII+
MJ MTRJ

hhh

2 1.6 mm Cord

EP STII+

H LazrSPEED 150
Multimode

Cordage Size

Y Multi-fiber Fanout
Cables

SC SC

Number of Ends
1 Simplex
2 Duplex
A 12 Fiber Ribbon
D 24 Fiber IPD
E 48 Fiber IPD
F 72 Fiber IPD

182

600G2 Fiber Optic

Modular Shelf
The SYSTIMAX 600G2 System is a series of low-profile Fiber Optic
Combination Shelves that are used for a combination of splicing
and termination of fiber optic building cable or outside plant
(OSP) cables. The 600G2 modular shelves system is available in
both 1U and 2U height fully enclosed shelves, with integrated
front cable management trough included. It features either a
fixed tray, or slide-out tray for easy access.
The 600G2 modular shelf system features interchangeable G2 modules,
which are ordered separately. The G2 modules are available in SC, ST and LC for LazrSPEED, OptiSPEED and
TeraSPEED Solutions. The 1U shelf accepts up to 4 and the 2U shelf accepts up to 8 G2 fiber modules, which are pre-populated
with fiber optic adapters. The fiber modules are offered either fiberless or equipped with pre-terminated pigtails ready for splicing.
In addition, a multimedia outlet bezel can be used interchangeably with the G2 module to facilitate multimedia applications.
(For more information on this please refer to the SYSTIMAX G2 module).
Completing the 600G2 modular shelf offer is the patent pending RoloSplice kit, which provides easy access and administration of
two individual splice trays for either fusion or mechanical splices, for the 1U shelf, and 4 splice trays for the 2U shelf. Each 600G2
modular shelf accommodates up to two RoloSplice kits.

Features and Benefits:

Hinged front doors for easy access

Front cable management trough
Top cover panel
Standard water-tight cable entry conduit connectors for OSP cable, cable diameter 0.25 in to 0.50 in (6.35 mm to 12.70 mm)
Blank labels for identifying fiber splices and terminations

Additional 600G2 modular shelf accessories include:

Water-tight connector kit for smaller diameter cable, cable diameter 0.08 in to 0.275 in (2.03 mm to 6.99 mm)
Universal mounting bracket kit to adapt shelf for ETSI frames or 23 frames

Physical Specifications

Weight: 1U: 7.2 lbs (3.3 kg) fixed

2U: 10.2 lbs (4.2 kg) fixed
1U: 9.0 lbs (4.1 kg) sliding
2U: 12.0 lbs (5.4 kg) sliding
Overall Height: 1U: 1.75 in (4.45 cm)
2U: 3.5 in (8.90 cm)
Overall Width: (including mounting brackets) 19 in (48.26 cm)
Tray Depth: 10 in (25.4 cm)
Overall Shelf Depth: (including trough) 14 in (35.56 cm) fixed
18 in (45.72 cm) sliding
OSP Cable Capacity: 1U: 2
2U: 4

G2 Fiber
Connectivity

Shelf System Capacity:

Application

Connection Type

Capacity
600G2-1U-MOD

Capacity
600G2-2U-MOD

Termination Only

LC
SC
ST

48
24
24

96
48
48

Termination + Fusion Splicing

LC
SC
ST

48
24
24

96
48
48

Termination + Mechanical Splicing

LC
SC
ST

48
24
24

96
48
48

183

G2 Shelf
Product Number

Description

Material ID

600G2-1U-MOD-SD

600G2 Modular Shelf, 1U, Slide

760028324

600G2-1U-MOD-FX

600G2 Modular Shelf, 1U, Fixed

760028332

600G2-2U-MOD-SD

600G2 Modular Shelf, 2U, Slide

760032086

600G2-2U-MOD-FX

600G2 Modular Shelf, 2U, Fxed

760032094

Description

Material ID

RS-00

RoloSplice, Accept 4 Splice Trays (not included)

760027516

RS-2AM-12SF

RoloSplice Kit E/W 2x Mech Splice Tray for 1U Shelf

760039859

RS-2AF-16SF

RoloSplice Kit E/W 2x Fusion Splice Tray for 1U Shelf

760039867

RS-4AM-12SF

RoloSplice Kit E/W 4x Mech Splice Tray for 2U Shelf

760031849

RS-4AF-16SF

RoloSplice Kit E/W 4x Fusion Splice Tray for 2U Shelf

760031856

1AM1-12LG

Mechanical Splice Organizer, Holds 12 Splices, Pack of 10

700006240

1AMF1-16LG

Fusion Splice Organizer, Holds 16 Splices, Pack of 10

700006257

1AMF1-6LG

Mass Fusion Splice Organizer, Holds 6 Splices, Pack of 10

700006281

Splice Kits
Product Number

Accessories
Product Number

Description

Material ID

600-SRF

Small-Diameter-Cable Fitting Kit

760039875

600-23BRKT

Mounting Bracket Kit for 23 Frame

760039883

G2 Fiber
Connectivity

184

1000G2 Fiber Optic

Modular Shelf
The SYSTIMAX 1000G2 Modular Shelf is the next generation
(G2) high capacity, high density fiber optic shelf, used for a
combination of splicing and termination of fiber optic building
cable or outside plant (OSP) cables. The shelf can be used for
combined termination and splicing for up to 192 fibers with
LC and for up to 144 fibers with SC or ST connections. It has a
unique patent pending design that combines both splicing
and termination in a sliding format, which in turn provides
both rear and full front access.
This 4U combination shelf is 14 inches deep, featuring an additional 3 inches of depth for better incoming fiber management,
when used with 6 inch deep equipment mounting rails. It provides double density versus separate shelves for splicing and
termination and improves slack fiber management. The new white internal structure improves visibility for the installer and
slides out completely, providing easy access to all terminations.
The 1000G2 modular shelf system features interchangeable G2 modules, available in SC, ST and LC for LazrSPEED, OptiSPEED and
TeraSPEED Solutions. G2 modules are offered with or without pre-assembled and factory-terminated pigtails. In addition, a multimedia outlet bezel can be used interchangeably with the G2 module to facilitate multimedia applications. (For more information
on this please refer to the SYSTIMAX G2 modules documentation).
Completing the 1000G2 modular shelf offer is the patent pending Splice Wallet, which provides easy access and administration of
six individual splice trays. Each 1000G2 modular shelf will accommodate up to 12 G2 modular cartridges and two Splice Wallets.
Each 1000G2 modular shelf is equipped with:
Hinged front and rear doors constructed of black polycarbonate and equipped (rear door) with knockouts for optional lock
mechanism
Universal shelf mounting brackets for 19, 23 or ETSI frame mounting
Cable entry protectors for incoming building fiber or OSP fiber
Fiber jumper bend limiters
Blank labels for identifying fiber splices and terminations
Articulated splicing/termination panel that slides out and pivots for easy access

Physical Specifications:

G2 Fiber
Connectivity

Weight: 12 lbs (5.4 kg)

Height: 7 in (17.8 cm)
Width: 17 in (43.2 cm)
Depth: 14 in (35.6 cm)
OSP Cable Capacity: 4

Shelf System Capacity:

Application

Connection Type

1000G2 Modular System Capacity

Termination Only

LC
SC
ST

144
72
72

Termination + Fusion Splice

LC
SC
ST

144
72
72

Termination + Mechanical Splice

LC
SC
ST

144
72
72

185

G2 Shelf
Product Number

Detailed Description

Material ID

1000G2-4U-MOD-SD

1000G2 Modular Combo Shelf, 4U, Sliding

760023200

Splice Kits
Product Number

Detailed Description

Material ID

SW-00

Splice Wallet, Accepts 6x Splice Trays (not Included)

760027342

SW-6AM-12SF

Mechanical Splice Wallet Kit for up to 144 Splices, Include 6 Splice Trays

760031047

SW-6AF-16SF

Fusion Splice Wallet Kit for up to 192 Splices, Include 6 Splice Trays

760031054

1AM1-12LG

Mechanical Splice Organizer, Holds 12 Splices, Pack of 10

700006240

1AMF1-16LG

Fusion Splice Organizer, Holds 16 Splices, Pack of 10

700006257

1AMF1-6LG

Mass Fusion Splice Organizer, Holds 6 Splices, Pack of 10

700006281

Accessories
Product Number

Detailed Description

Material ID

1000G2-CPB

Cable Protector Kit for 1000G2 Shelf

160026674

G2 Fiber
Connectivity

186

G2 Modules
The SYSTIMAX G2 Fiber Optic Shelf is the next generation (G2)
high capacity, high-density fiber optic shelf. The G2 shelf can be
used for a combination of splicing and termination of fiber optic
building cable or outside plant (OSP) cables.
The 600G2 and 1000G2 modular shelf systems feature
interchangeable G2 modules available in SC, ST and LC for
LazrSPEED, OptiSPEED and TeraSPEED Solutions. All G2 modules
are pre-populated with fiber optic adapters, and are offered
with or without pre-assembled and factory-terminated pigtails.

Features and options of the un-terminated fiber modules include:

LazrSPEED modules with twelve LC, six SC, or six ST adapters

OptiSPEED modules with twelve LC, six SC, or six ST adapters
TeraSPEED modules with twelve LC, six SC, or six ST adapters
All modules can be used on all SYSTIMAX G2 series shelves, including 600G2 and 1000G2

Features and options of the pre-terminated fiber modules include:

LazrSPEED modules with twelve LC, six SC, or six ST adapters, include 2-meters long pre-terminated LazrSPEED 550 pigtails
OptiSPEED modules with twelve LC, six SC, or six ST adapters, include 2-meters long pre-terminated pigtails
TeraSPEED modules with twelve LC, six SC, or six ST adapters, include 2-meters long pre-terminated pigtails
One type of LC module is offered, containing 12 pigtails with colorized 0.9 mm tight-buffered cordages, following color
sequence as defined by TIA standard
Two types (type A and B) of SC or ST module are offered and should be ordered in pairs. Each module contains 6 pigtails
with colorized 0.9 mm tight-buffered cordages
Type A SC/ST modules include colorized pigtails in Blue, Orange, Green, Brown, Slate and White. Type B SC/ST modules
include colorized pigtails in Red, Black, Yellow, Violet, Rose and Aqua
All modules can be used on all SYSTIMAX G2 series shelves, including 600G2 and 1000G2

G2 optional modular panel include:

Blank panel with the same footprint as the fiber G2 module, and can be used in all SYSTIMAX G2 modular shelves including
600G2 and 1000G2
Multimedia outlet bezel panel with the same footprint as the fiber G2 module, which accepts up to four M-Series jacks for
multimedia applications
Product Number

Detailed Description

Material ID

MODG2-12LC-LS-PT

G2 Module with 12LC LazrSPEED 550 Pigtails

760027748

MODG2-6SC-LS-PT-A

G2 Module with 6SC LazrSPEED 550 Pigtails, Type A

760032227

MODG2-6SC-LS-PT-B

G2 Module with 6SC LazrSPEED 550 Pigtails, Type B

760034082

MODG2-6ST-LS-PT-A

G2 Module with 6ST LazrSPEED 550 Pigtails, Type A

760032235

MODG2-6ST-LS-PT-B

G2 Module with 6ST LazrSPEED 550 Pigtails, Type B

760034058

MODG2-12LC-MM-PT

G2 Module with 12LC OptiSPEED MM Pigtails

760031021

MODG2-6SC-MM-PT-A

G2 Module with 6SC OptiSPEED MM Pigtails, Type A

760032243

MODG2-6SC-MM-PT-B

G2 Module with 6SC OptiSPEED MM Pigtails, Type B

760034090

MODG2-6ST-MM-PT-A

G2 Module with 6ST OptiSPEED MM Pigtails, Type A

760032250

MODG2-6ST-MM-PT-B

G2 Module with 6ST OptiSPEED MM Pigtails, Type B

760034066

MODG2-12LC-SM-PT

G2 Module with 12LC TeraSPEED Pigtails

760031039

MODG2-6SC-SM-PT-A

G2 Module with 6SC TeraSPEED Pigtails, Type A

760032268

MODG2-6SC-SM-PT-B

G2 Module with 6SC TeraSPEED Pigtails, Type B

760034108

MODG2-6ST-SM-PT-A

G2 Module with 6ST TeraSPEED Pigtails, Type A

760032276

MODG2-6ST-SM-PT-B

G2 Module with 6ST TeraSPEED Pigtails, Type B

760034074

187

G2 Fiber
Connectivity

Product Number

Detailed Description

Material ID

MODG2-12LC-LS

G2 Module, E/W 12 LazrSPEED LC Adapters

760032136

MODG2-6SC-LS

G2 Module, E/W 6 LazrSPEED SC Adapters

760032144

MODG2-6ST-LS

G2 Module, E/W 6 LazrSPEED ST Adapters

760032151

MODG2-12LC-MM

G2 Module, E/W 12 OptiSPEED MM LC Adapters

760032169

MODG2-6SC-MM

G2 Module, E/W 6 OptiSPEED MM SC Adapters

760032177

MODG2-6ST-MM

G2 Module, E/W 6 OptiSPEED MM ST Adapters

760032185

MODG2-12LC-SM

G2 Module, E/W 12 TeraSPEED LC Adapters

760032193

MODG2-6SC-SM

G2 Module, E/W 6 TeraSPEED SC Adapters

760032201

MODG2-6ST-SM

G2 Module, E/W 6 TeraSPEED ST Adapters

760032219

MODG2-Blank

G2 Blank Panel for G2 Modular Shelf

760032102

MODG2-MOB

G2 Multimedia Outlet Bezel for Modular Shelf,

Accept 4x Outlets with M-Series Openings, Outlet not Included

760032110

G2 Fiber
Connectivity

188

600G2 Fiber Optic

Panel Shelf
The SYSTIMAX 600G2 System is a series of low-profile fiber optic
combination shelves that are used for a combination of splicing
and termination of fiber optic building cable or outside plant
(OSP) cables. The shelf is designed for use as a termination shelf
only (direct connector termination) or as a splice and termination
shelf for up to 48 individual fibers.
The 600G2 panel shelf system is available in a 1U height fully
enclosed shelf, with integrated front cable management trough
included. It features either a fixed tray, or slide-out tray for easy access. A front faceplate of different
configuration is required and can be ordered separately. The front faceplates accept standard simplex or duplex fiber optic
adapters to provide flexibility.
Completing the 600G2 shelf offer is the patent pending RoloSplice kit, which provides easy access and administration of two
individual splice trays for either fusion or mechanical splices, for the 1U shelf.

Each 600G2 panel shelf is equipped with:

Hinged front doors for easy access

Front cable management trough
Top cover panel
Standard water-tight cable entry conduit connectors for OSP cable, cable diameter 0.25 in to 0.50 in (6.35 mm to 12.70 mm)
Blank labels for identifying fiber splices and terminations

Additional 600G2 panel shelf accessories include:

Water-tight connector kit for smaller-diameter cable, cable diameter 0.08 in to 0.275 in (2.03 mm to 6.99 mm)
Universal mounting bracket kit to adapt shelf for ETSI frames or 23 in frames

Physical Specifications:

Weight: 7.2 lbs (3.3 kg) fixed

9.0 1bs (4.1 kg) sliding
Overall Height: 1.75 in (4.45 cm)
Overall Width: 19 in (48.26 cm) (including mounting brackets)
Tray Depth: 10 in (25.4 cm)
Overall Shelf Depth: (includes trough) 14 in (35.56 cm) fixed
18 in (45.72 cm) sliding
OSP Cable Capacity: 2

G2 Fiber
Connectivity

Shelf System Capacity:

Application

Connection Type

Capacity

Termination Only

LC
SC
ST

48
48
24

Termination + Fusion Splicing

LC
SC
ST

48
48
24

Termination + Mechanical Splicing

LC
SC
ST

48
48
24

G2 Shelf
Product Number

Detailed Description

Material ID

600G2-1U-UP-FX

600G2 Panel Shelf, 1U, Fixed

760033928

600G2-1U-UP-SD

600G2 Panel Shelf, 1U, Sliding

760033936

189

600G2 Panels
Product Number

Detailed Description

Material ID

600-48LC-DPLX-00

600G2 Panel, Accepts 24 Duplex LC Adapters

760033845

600-24LC-SPLX-00

600G2 Panel, Accepts 24 Simplex LC Adapters

760033852

600-48SC-DPLX-00

600G2 Panel, Accepts 24 Duplex SC Adapters

760033860

600-24SC-DPLX-00

600G2 Panel, Accepts 12 Duplex SC Adapters

760033878

600-24SC-SPLX-00

600G2 Panel, Accepts 24 Simplex SC Adapters

760033886

600-12SC-SPLX-00

600G2 Panel, Accepts 12 Simplex SC Adapters

760033894

600-24ST-SPLX-00

600G2 Panel, Accepts 24 Simplex ST Adapters

760033902

600-12ST-SPLX-00

600G2 Panel, Accepts 12 Simplex ST Adapters

760033910

Product Number

Detailed Description

Material ID

RS-00

RoloSplice, Accept 4 Splice Trays

760027516

RS-2AM-12SF

RoloSplice Kit, E/W 2x Mech Splice Tray

760039859

RS-2AF-16SF

RoloSplice Kit, E/W 2x Fusion Splice Tray

760039867

1AM1-12LG

Mechanical Splice Organizer, Holds 12 Splices, Pack of 10

700006240

1AMF1-16LG

Fusion Splice Organizer, Holds 16 Splices, Pack of 10

700006257

1AMF1-6LG

Mass Fusion Splice Organizer, Holds 6 Splices, Pack of 10

700006281

Product Number

Detailed Description

Material ID

600-SRF

Small-Diameter-Cable Fitting Kit

760039875

600-23BRKT

Mounting Bracket Kit for 23 Frame

760039883

Splice Kits

Accessories

G2 Fiber
Connectivity

190

1000G2 Fiber Optic

Panel Shelf
The SYSTIMAX 1000G2 Panel Shelf is the next generation (G2)
high capacity, high-density fiber optic shelf, used for a
combination of splicing and termination of fiber optic building
cable or outside plant (OSP) cables. The shelf can be used for
combined termination and splicing for up to 192 fibers and for
up to 288 fibers if used for termination only (LC connections).
It has a unique patent-pending design that combines both
splicing and termination in a sliding format, which in turn
provides both rear and full front access.
The 4U combination shelf is 14 inches deep, featuring additional 3 inches of depth for better incoming fiber management when
used with 6 inch deep equipment mounting rails. It provides double density versus separate shelves for splicing and termination
and improves slack fiber management. The new white internal structure improves visibility for the installer and slides out
completely, providing easy access to all terminations.
The 1000G2 panel shelf system accepts up to twelve 1000-type panels or SYSTIMAX InstaPATCH Plus modules (For more
information on this, please refer to the SYSTIMAX InstaPATCH Plus Modules Documentation). The 1000-type panels accept LC, SC
or ST adapters, except for the high-density panels which include pre-populated adapters, 1000 type panels are in general offered
unpopulated.
Completing the 1000G2 shelf offer is the patent pending Splice Wallet, which provides easy access and administration of six
individual splice trays. Each 1000G2 shelf will accommodate up to 12 G2 InstaPATCH modules/1000 series panels, and two Splice
Wallets.

Each 1000G2 panel shelf is equipped with:

Hinged front and rear doors constructed of black polycarbonate and equipped (rear door) with knockouts for optional lock
mechanism
Universal shelf mounting brackets for 19 in, 23 in or ETSI frame mounting
Cable entry protectors for incoming building fiber or OSP fiber
Fiber jumper bend limiters
Blank labels for identifying fiber splices and terminations
Articulated splicing/termination panel that slides out and pivots for easy access

Physical Specifications:
Weight: 12 lbs (5.4 kg)
Height: 7 in (17.8 cm)
Width: 17 in (43.2 cm)
Depth: 14 in (35.6 cm)
OSP Cable Capacity: 4

Shelf System Capacity:

Application

Connection Type

1000G2 Modular System Capacity

Termination Only

LC
SC
ST

288
144
144

Termination + Fusion Splice

LC
SC
ST

192
144
144

Termination + Mechanical Splice

LC
SC
ST

192
144
144

G2 Shelf
Product Number

Detailed Description

Material ID

1000G2-4U-UP-SD

1000G2 Panel Shelf, Accepts 12 1000-Type Panels

760026245

191

G2 Fiber
Connectivity

1000G2 Panels
Product Number

Detailed Description

Max. Qty per Shelf

Material ID

1000-24LC-DPLX-LS

1000 Panel, E/W 12x LazrSPEED Duplex Adapters (Aqua)

12

760028209

1000-24LC-DPLX-MM

1000 Panel, E/W 12x MM Duplex Adapters (Beige)

12

760027441

1000-24LC-DPLX-SM

1000 Panel, E/W 12x SM Duplex Adapters (Blue)

12

760027433

1000-12SC-DPLX-MM

1000 Panel, E/W 6x MM Duplex Adapters (Beige)

12

760021790

1000-12SC- DPLX-SM

1000 Panel, E/W 6x SM Duplex Adapters (Blue)

12

760027714

1000-12ST- SPLX-MM

1000 Panel, E/W 12x MM Simplex Adapters

12

760021832
760027722

1000-12ST-SPLX-SM

1000 Panel, E/W 12x SM Simplex Adapters

12

1000-12LC-DPLX-00

1000 Panel, Accepts 6x Duplex LC Adapters

12

700011414

1000-8LC-SPLX-00

1000 Panel, Accepts 8x Simplex LC Adapters

12

760026369

1000-12SC-DPLX-00

1000 Panel, Accepts 6x Duplex SC Adapters

12

760024372

1000-6SC-DPLX-00

1000 Panel, Accepts 3x Duplex SC Adapters

12

700010952

1000-6SC-SPLX-00

1000 Panel, Accepts 6x Simplex SC Adapters

12

700011398

1000-8SC-SPLX-00

1000 Panel, Accepts 8x Simplex SC Adapters

12

700168966

1000-12ST-SPLX-00

1000 Panel, Accepts 12x Simplex ST Adapters

12

760024380

1000-6ST-SPLX-00

1000 Panel, Accepts 6x Simplex ST Adapters

12

700011406

1000-6ST-SPLX-00

1000 Panel, Accepts 6x Simplex ST Adapters, 12/pk

As needed

700011109

1000-Blank-BK

1000 Blank Panel, Black, 6/pk

As needed

760016063

1000-Blank-WH

1000 Blank Panel, White, 6/pk

As needed

700162936

Product Number

Detailed Description

Max. Qty per Shelf

Material ID

SW-00

Splice Wallet, Accepts 6x Splice Trays (not included)

As needed

760027342

SW-6AM-12SF

Mechanical Splice Wallet Kit for up to 144 Splices, Include 6 Splice Trays 2

760031047
760031054

Splice Kits

G2 Fiber
Connectivity

SW-6AF-16SF

Fusion Splice Wallet Kit for up to 192 Splices, Include 6 Splice Trays

1AM1-12LG

Mechanical Splice Organizer, Holds 12 Splices, Pack of 10

700006240

1AMF1-16LG

Fusion Splice Organizer, Holds 16 Splices, Pack of 10

700006257

1AMF1-6LG

Mass Fusion Splice Organizer, Holds 6 Splices, Pack of 10

700006281

Product Number

Detailed Description

Material ID

1000G2-CPB

Cable Protector Kit for 1000G2 Shelf

760026674

Accessories

192

Fiber Optic LIUs: 100A3,

200A, 200B, 400A2,
100LS and 200LS
The Fiber Optic LIUs are modular enclosures that provide cross-connect
and/or inter-connect, splicing and terminating capabilities for outside
plant, building and riser cables.
The 100A3 LIU terminates a maximum of 24 fibers using LC connectors
and 12 fibers using STII+ or SC connectors. With an optional splicing
kit, it can accommodate up to 12 mechanical or fusion splices. The
100A3 is made of an engineered polycarbonate material and can
accommodate two connector panels or one splice unit. The 100A3 LIU
is both wall and frame mountable (with an optional frame mounting
bracket), and feature five retainer rings arranged in a circular configuration to
hold slack while not violating minimum bend radius requirements.
The 200A LIU has similar features as the 100A3 except that it is made of aluminum and has two
additional windows for connector panels. The 200A LIU terminates 48 fibers using LC connectors
and 12 fibers using STII+ or SC connectors. With an optional splicing kit, it can accommodate
up to 24 splices.
The 200B LIU is used to terminate 32 fibers or splice 24 fibers. It is a National Electrical
Manufacturers Association (NEMA) four-rated cabinet. The 200B is a steel enclosure designed
for industrial applications. The right side is designed to allow rearrangement of jumpers or
inter-connection to building cable. It comes with a removable outer door and an inner door for securing the network section.
The 200B is both wall and frame mountable.
The 400A2 LIU directly terminates 64 fibers or accommodates 24 splices plus 48 terminations. The 400A may be ordered with or
without key locks.
The wall mountable 100LS LIU terminates up to 24 fibers using LC connectors and up to 12 fibers using STII+ or SC connectors.
With an optional splicing kit it can accommodate up to 12 mechanical or fusion splices. The 100LS holds two 10P panels.
The wall mountable 200LS LIU terminates up to 48 fibers using LC connectors and up to 24 fibers using STII+ or SC connectors.
It can accommodate up to 12 mechanical or fusion splices, using an optional splicing kit. The 200LS can accommodate up to 24
mechanical or fusion splices with optional splicing kits, but the fiber termination capacity is decreased to 12 STII+ or SC connections,
or 24 LC connections. The 200LS holds four 10P panels.
The LIU adapter panels can be ordered seperately and are detailed in the LST and LIU panel section.
The 742A mounting panel allows up to two 100 or 200 LIUs or one 400 LIU to be mounted in an inter-connection or
cross-connect fashion. The panel may be mounted on either a 19 or a 23 in (48.3 or 58.4 cm) frame.
The 1A1 adapter includes a 10 in (25.4 cm) conduit, a T-section, a 90-degree bend, two guides and two mounting screws. The
adapter is used to guide and protect fibers running from a 12A-type clamp into two adjacent columns of LIUs. Each 100A3/200A
LIU requires one 1A1 adapter. The 12A clamp must be ordered separately.

Physical Specifications:

Height: 100A3, 200A, 100LS, 200LS: 8.75 in (22.22 cm)

200B: 12.6 in (32.0 cm)
400A2: 11 in (27.94 cm)
Width: 100A3, 200A, 100LS, 200LS: 7.5 in (19 cm)
200B, 400A2: 17 in (43.18 cm)
Depth: 100A3, 100LS: 3 in (7.62 cm)
200A, 400A2, 200LS: 4 in (10.16 cm)
200B: 5.25 in (13.34 cm)

193

Additional
Fiber
Connectivity

LIU Termination and Splice Configuration and Capacity:

LIU
100A3
100LS
200A
200LS
200B

400A

Additional
Fiber
Connectivity

No. of Terminations

No. of Splices

Additional Parts Needed

12 SC/ST (24 LC)

2 Panels with Adapters

12 SC/ST (24 LC)

12

2 Panels with Adapters and 1 Splice Kit

24

2 Blank Panels and 1 Splice Kit + 1 Suppl. Kit

24 SC/ST (48 LC)

4 Panels with Adapters

24 SC/ST (48 LC)

12

4 Panels with Adapters and 1 Splice Kit

12 SC/ST (48 LC)

24

2 Panels with Adapters + 2 Blank Panels, and 1 Splice Kit + 1 Suppl. Kit

36

4 Blank Panels, 2 Splice Kits + 1 Suppl. Kit

48 SC/ST (96 LC)

8 Panels with Adapters

48 SC/ST (96 LC)

12

8 Panels with Adapters and 1 Splice Kit

36 SC/ST (72 LC)

24

6 Panels with Adapters + 2 Blank Panels, and 1 Splice Kit + 1 Suppl. Kit

36

8 Blank Panels, 2 Splice Kits + 1 Suppl. Kit

Product Number

Material ID

100A3 LIU

106896947

200A LIU

105535926

200B2 LIU

106939564

400A1 LIU w/o locks

106266901

400A2 LIU w/ locks

106414170

100LS LIU

108548868

200LS LIU

108548876

742A

105483218

1A1 Adapter

105034482

1A4 and 2A4 Vertical

Fiber Optic Trough
The 1A4 and 2A4 Fiber Optic Troughs are vertical aluminum troughs, used to
arrange fiber patch cords vertically from one LIU to another in a multi-unit fiber
cross-connect. The 1A4 trough is used with a 100A3 LIU. The 2A4 vertical trough is
used with the 200A LIU. Two mounting screws are included.

Physical Specifications:
Height: 8.75 in (22.2 cm)
Width: 4.0 in (10.2 cm)

Product Number

Detailed Description

Material ID

1A4

For use with 100A3 LIU

104141866

2A4

For use with 200A LIU

106497753

194

1A6 and 2A6

Horizontal Fiber
Optic Trough
The 1A6 and 2A6 Fiber Optic Troughs are horizontal aluminum
troughs used to arrange patch cords so they run horizontally
between Fiber Optic Interconnection Units (LIUs) or 1A4 or 2A4
Troughs. The 1A6 Fiber Optic Troughs may be used with 100A3
LIUs and 1A4 Fiber Optic Troughs. The 2A6 Fiber Optic trough is
used to connect vertical columns of 200A LIUs and 1A6 Jumper
Troughs. The 2A6 Trough should be specified with single columns
when protection and retention of cross-connect jumper cable
slack is needed. Two mounting screws are included.

Physical Specifications:
Height: 1A6: 4.0 in (10.2 cm)
2A6: 5.0 in (12.7 cm)
Width: 11.5 in (29.2 cm)
Depth: 1A6: 4.0 in (10.2 cm)
2A6: 5.0 in (12.7 cm)

Product Number

Detailed Description

Material ID

1A6

For use with 100A3 LIU

104141874

2A6

For use with 200A LIU

106497761

12A Clamp
The 12A1 Clamp is used to secure and ground one fiber
optic metallic sheath cable. The clamp consists of a
mounting bracket, two plastic half-clamps and suitable
grounding hardware.
Additional
Fiber
Connectivity

The 12A2 Clamp is similar to the 12A1 Clamp, but it does

not include bonding and grounding hardware. The 12A2
Clamp is intended for use on non-metallic sheath fiber
optic cables.
Product Number

Detailed Description

Material ID

12A1 Clamp

Clamp for Metallic Sheath Cable

700025513

12A2 Clamp

Clamp for Dielectric Sheath Cable

700025653

195

Fiber Optic Splice and

Termination Shelves
The LST and LSTSY Fiber Optic Termination Shelves are used for
termination of buffered fiber optic building cables or direct
termination of outside plant fibers.
The LSTSY OptiSPEED Termination Shelf can be equipped with
adapter panels to terminate up to 144 fibers using LC connectors,
or 72 fibers using ST or SC connectors. The adapter panels can
be found under the LST and LIU panel section.
The LSTSY Termination Shelf accommodates 12 multiport adapters,
which can be found in the fiber connector and adapter section. Cable slack is maintained behind
each adapter panel.
The LSTLS termination shelf comes equipped with color-coded LazrSPEED adapter strips for
convenient ordering, and is available with LC, STII+ and SC adapters. This shelf is designed for
mounting in a 19 inch frame for enterprise applications.
The Fiber Optic Shelf Splice (LSS) is generally used with two termination shelves or in
splice-only applications to store individual mechanical or fusion splices.
The Fiber Optic Shelf Combination (LSC) is used for a combination of splicing
and termination of outside plant cables or Fiber Optic Building Cable. The shelf is
designed to be used as a termination shelf only (direct connector termination) or
used as a splice and termination shelf by using pigtails.
The Fiber Optic Shelf Jumper Storage (LSJ) is used to store slack in pre-assembled
cross-connect or inter-connect jumpers or take up slack in buffered cables routed
from equipment or outside plant cables.
The Fiber Optic Shelf Terminating Unit is a 2.5 inch (6.35 cm) high shelf assembly that can be mounted into a 23 inch (48.3 or 58.4
cm) frame. This shelf has a total of two pivoting trays that each will accommodate termination of up to 24 fibers using ST connectors. Two bend limiting drums are included with each tray to prevent bending fibers less than 3 inch (7.62 cm) diameter.

Physical Specifications:
Additional
Fiber
Connectivity

Height: LST1U-072/7 and LST1F-072/7: 7 in (17.8 cm)

LST1U-144/9: 9 in (22.9 cm)
LSC and LSJ: 5 in (12.7 cm)
LSTIP: 2.5 in (6.3 cm)
Width: 17 in (43.2 cm)
Depth: 11 in (27.9 cm)
OSP Cable Capacity: 4

196

Product Number

Detailed Description

Material ID

LST1U-072/7

Direct Termination of 72 Individual Fibers

700007289

LST1U-144/9

Direct Termination of 144 Individual Fibers

700007214

LST1F-072/7

Direct Termination of 72 Individual Fibers, Front Access Only

700007271

LST1U-144/9-B

Direct Termination of 144 Individual Fibers, Black

760010207

LSTSY

Termination Shelf

700011166

LSTLS/MM/LC-144/7

Equipped with 144 LC Adapters

108565631

LSTLS/MM/SC-072/7

Equipped with 72 SC Adapters

108565649

LSTLS/MM/ST-072/7

Equipped with 72 ST Adapters

108565656

LSS1U-144/7

Splice Shelf for Splicing Only, up to 144 Individual Fibers, 4U

700007222

LSS1U-072/5-S

Side Access Splice Shelf for Splicing Only, up to 72 Individual Fibers, 3U

700225790

LSS1U-072/5

Splice Shelf for Splicing Only, up to 72 Individual Fibers, 3U

700007230

LSC2U-024/5

Splicing and/or Direct Termination of 24 Individual Fibers

700007255

LSJ1U-072/5

Storage of Jumper Cable Slack

700007248

LST1P-48ST/2.5

Direct Termination of 48 Fibers Using ST Connectors.

700007263

Door, LST, 9 in, Metal

700233000

D-181706 and
D-181707 Mechanical
and Fusion Splice
Adapter Kits
The D-181706 and D-181707 Splice Adapter Kits adapt the 100,
200, and 400 LIUs for mechanical and fusion splicing, respectively.
One D-Kit is required for the first 12 fibers and one supplemental
kit per unit is required for each additional set of 12 fibers.

Additional
Fiber
Connectivity

D-181706 And D-181707 include Bracket Support with Screws

(1), Drum Adapter (1), Splice Tray (1), PVC Tubing (1), Mechanical
or Fusion Splice Organizer (1), Instruction Sheet (1).
Supplemental Kits include Splice Tray (1), PVC Tubing (1),
Mechanical or Fusion Splice Organizer (1).
Product Number

Detailed Description

Material ID

D-181706

Mechanical Splice Kit

105289656

Supplemental Mechanical Splice Kit

106726714

Fusion Splice Kit

105289664

Supplemental Fusion Splice Kit

106726706

LT1A-F/F

Fusion Splice Organizer (Retains 32 Splices)

700025588

LT1A-M/M

Mechanical Splice Organizer (Retains 24 Splices)

700217045

Splice Tray Holder

700005069

D-181707

197

Fiber Optic Panels for

LST and LIU Shelves
The fiber optic panels are used to hold ST, SC and LC adapters.
They can be mounted on various fiber optical shelves. Adapters
are not included unless otherwise noted. The 1000 series panels
work with the LST1U 72/7, LST1F 72/7, 400 LIU, and the LSC2U
24/5 shelves. The 1200 series panels work with the LST1U 144/9 shelf. The 10 series panels work
with the 100 and 200 LIU.

Physical Specifications:
Height: 10-Type: 3.8 in (9.7 cm)
1000-Type: 5.1 in (13.0 cm)
1200-Type: 7.1 in (18.0 cm)
2200-Type: 7.1 in (18.0 cm)

Additional
Fiber
Connectivity

Width: 10-Type: 1.5 in (3.8 cm)

1000-Type: 1.1 in (2.8 cm)
1200-Type: 1.1 in (2.8 cm)
2200-Type: 2.2 in (5.6 cm)

Product Number

Detailed Description

Material ID

1000-12LC-DPLX

Panel for 6 Duplex LC Adapters (4U)

700011414

1000-8LC-SPLX

Panel for 8 Simplex LC Adapters (4U)

760026369

1000-6SC-DPLX

Panel for 3 Duplex SC Adapters (4U)

700010952

1000-6SC-SPLX

Panel for 6 Simplex SC Adapters (4U)

700011398

1000-6ST-SPLX-00

Panel for 6 Simplex ST Adapters (4U)

700011406

1000-6ST-SPLX-00

Panel for 6 Simplex ST Adapters, Pack of 12 (4U)

700011109

1000-Blank-WH

Blank Panel (4U), Pack of 6

700162936

1200-18LC-DPLX

Panel for 9 Duplex LC Adapters (5U)

700208762

1200-12SC-SPLX

Panel for 12 Simplex SC Adapters (5U)

700162910

2200-24SC-DPLX-WH

Panel for 12 Duplex SC Adapters, Double Width (5U)

760006197

2200-24SC-DPLX-BK

Panel for 12 Duplex SC Adapters, Double Width (5U), Black

760010199

12-12ST-SPLX

Panel for 12 Simplex ST Adapters, (5U)

700208754

1200-Blank-WH

Blank Panel (5U), Pack of 6

700209653

10PLC-LS

Panel includes 12 LC Adapters, LazrSPEED

108627266

10PLC-MM

Panel includes 12 LC Adapters, OptiSPEED MM

108491697

10PLC-SM

Panel includes 12 LC Adapters, Singlemode

700025984

10PSC-LS

Panel includes 6 SC Adapters, LazrSPEED

108627274

10PSC-MM

Panel includes 6 SC Adapters, OptiSPEED

108259458

10PSC-LS

Panel includes 6 SC Adapters, Singlemode

700011430

10PST-LS

Panel includes 6 ST Adapters, LazrSPEED

108627282

10PST-MM

Panel includes 6 ST Adapters, OptiSPEED

108259466

10PST-SM

Panel includes 6 ST Adapters, Singlemode

700011422

10LC1-DPLX

Panel for 6 Duplex LC Adapters

107783755

10SC1-DPLX

Panel for 3 Duplex SC Adapters

107025835

10A (ST)

Panel for 6 Simplex ST Adapters

104141858

10 Blank

Blank Panel for 100LIU/200LIU

105276570

198

489 Fiber Optic

Interconnection Unit
The 489 Fiber Optic Interconnection Unit (FIU) complete family
of modular enclosures is designed to provide a solution for
terminating, splicing, managing and protecting fiber optic
cables. The units are designed to be installed in building
entrances, equipment rooms, or any place where fiber optic
cables interconnect or terminate in a protective area.
The 489 FIU product line features four different units. Each can be used in conjunction
with the others while preserving its own specific function.
The 489 Termination Unit provides housing for front facing fiber optic connectors. Optical jumpers are routed into integrated
jumper raceways and organized at the side of the unit.
The 489 Splice Unit provides storage for multiple fiber optic splices.
The 489 Combination Unit provides for both splicing and termination of optical fibers in one unit. This unit is configured by ordering
the appropriate termination unit and the 489FC1A-4RACK splice organizer. The 489FC1A-4RACK can be mounted in a termination
unit to hold (4) organizers, thereby forming a combination unit.
The 489 Interconnection Unit is a side facing termination unit that provides for interconnection of both incoming and outgoing
cables within the same enclosure.

Physical Specifications:

Weight: Termination Unit: 6.2 lbs (2.8 kg)

Splice Unit: 6.4 lbs (2.9 kg)
Combination Unit: 7.6 lbs (3.5 kg)
Interconnection Unit: 4.0 lbs (1.8 kg)
Height: 12.5 in (31.8 cm)
Width: 15.0 in (38.1 cm)
Depth: Termination Unit and Combination Unit: 8.30 in (21.1 cm)
Splice Unit and Interconnection Unit: 5.30 in (13.5 cm)
Material: UL approved, flame retardant, polycarbonate
Color: Ultra light gray

Product Number

Description

Material ID

489FT1-048SC

Termination Unit E/W 48 SC Simplex Adapters

108314196

489FT1-048SCD

Termination Unit E/W 24 SC Duplex Adapters

108314204

489FT1-048ST-MM

Termination Unit E/W 48 ST MM Adapters

108314212

489FT1-048ST-SM

Termination Unit E/W 48 ST SM Adapters

108314220

489FT1-096LCD-MM

Termination Unit E/W 48 LC Duplex MM Adapters

108314279

489FT1-096LCD-SM

Termination Unit E/W 48 LC Duplex SM Adapters

108314287

489FT1-1000

Termination Unit Accepts (8) 1000-Type Panels

108314238

489FS1-144

Splice Unit E/W Organizer Rack that Accepts (12) Splice Organizers

108314378

489FS1-12FS

Splice Organizer KitHolds (4) 12-Fiber Fusion Splice Organizers

108314345

489FC1A-4RACK

Splice Organizer Rack

108314295

489FI1-024SC

Interconnection Unit E/W 24 SC Simplex Adapters

108314311

489FI1-024ST-MM

Interconnection Unit E/W 24 ST MM Adapters

108314329

489FI1-024ST-SM

Interconnection Unit E/W 24 ST SM Adapters

108314337

199

Additional
Fiber
Connectivity

1100 Fiber
Distribution Panel
The LazrSPEED 1100 Fiber Distribution Panel is a high-quality
panel for terminating or inter-connecting fibers in a premise
wiring system. The shallow panel depth makes the 1100
ideal for wall-mounted racks. Front access to the connectors
behind the adapter strip is possible simply by removing
the adapter bezel from the panel. The trim design and
front access make the 1100 panel an excellent solution for
cramped and crowded telecommunications rooms.
The 1100LS Distribution Panel is equipped with adapters for 48 LC, 24 SC or 24 ST termination for LazrSPEED Solution. The 1100SY
panel requires four multiport adapters, which can be found in the fiber connector and adapter section.

Physical Specifications:

Height: 1.72 in (4.37 cm)1U rack space

Width: 19 in (48.26 cm)
Depth: 4.75 in (12.07 cm)

Product Number

Detailed Description

Material ID

1100SY

Distribution Panel

700006364

1100LS/MM/LC-48 LC

LazrSPEED Panel

108565557

1100LS/MM/SC-24 SC

LazrSPEED Panel

108565573

1100LS/MM/ST-24 ST

LazrSPEED Panel

108565581

MOD-G2-cover

Modular Cover, Pack of 12

760041897

Additional
Fiber
Connectivity

200

LC Connectors
The LC Connector is a revolutionary fiber optic connector. This small
form factor connector is only half the size of ST or SC connectors yet
it has superior optical performance and reduced installation time.
It uses the familiar insertion release mechanism similar to an RJ45
plug and has a pull-proof design. Fast becoming the connector
of choice, the physical and optical performance of the LC allows
engineers to design optical fiber infrastructures suited to the low loss needs of the
High-Speed Data Networks. The LC connector offers a complete connection solution with a product range designed for
field termination onto 0.9 mm fiber, 1.6 mm fiber cordage, multimode and singlemode fiber.
The high-performance LC connector is the recommended connector for all SYSTIMAX installations. The superior insertion loss
performance offered by the LC connector makes it the ideal connector for gigabit applications including all proposed 10 gigabit
ethernet specifications for multimode and singlemode fiber. The 0.9 mm fiber connector is designed to allow for the simple and
speedy termination of the connector onto 0.9 mm fiber. So, whether terminating a cable into a patch panel, connection box or
outlet, the LC connector offers the best-in-class solution.
The LC fiber optic simplex and duplex jumper connectors can be used to terminate simplex and duplex 1.6 mm jumper cords.
It is intended for use in central offices, local area networks (LANs), and in patch cords for premises distribution systems. The connector can also be used in computer backplane connections, computer peripheral interconnections, device terminations, and
other applications where quality, small-size, high-density, low-loss and a low-cost infrastructure are required.
The D-182959 upgrade kit (700005853) used in conjunction with tool kits 1032B5 or 1032F1, provides the necessary tools to
terminate LC connectors to 0.9 mm buffered fiber or 1.6 mm cordage. For termination to 0.9 mm buffered fiber only, the
D-182905 upgrade kit (700005895) may be used with the 1032B5 or 1032F1 kits. The 1032H mini tool kit (700005838) may be
used to terminate LC connectors to 0.9 mm buffered fiber using the EZ anaerobic adhesive method. Additionally, the appropriate
consumable kits are required to complete terminations.

Physical Specifications:
Length: 1.259 in (3.2 cm)
Tip Material: Ceramic

Optical Specifications:

Multimode: Average Loss: 0.1 dB Standard deviation 0.1 dB

Singlemode: Average Loss: 0.2 dB Standard deviation 0.1 dB
Insertion Loss Change: <0.3 dB Mating durability for 500 reconnect
<0.3 dB Temperature stability -40F to 167F (40C to 75C)
Cable Retention: 2 lbs for buffered fiber, 10 lbs for 1.6 mm cordage

Behind the Wall (BTW) LC Connectors

Product Number

Detailed Description

Fiber Type

Color

Qty/Pkg

Material ID

P1001A-Z-125
P1001A-Z-125/100
P1001A-Z-125R
P1001A-Z-125R/100
P1101A-Z-125
P1101A-Z-125R
P1101A-Z-125R/100

BTW LC Connector for 0.9 mm Buffered Fiber

BTW LC Connector for 0.9 mm Buffered Fiber
BTW LC Connector, Pre-radiused, for 0.9 mm Buffered Fiber
BTW LC Connector, Pre-radiused, for 0.9 mm Buffered Fiber
BTW LC Connector for 0.9 mm Buffered Fiber
BTW LC Connector for 0.9 mm Buffered Fiber, Pre-radiused
BTW LC Connector for 0.9 mm Buffered Fiber, Pre-radiused

MM
MM
MM
MM
SM
SM
SM

Beige
Beige
Beige
Beige
Blue
Blue
Blue

1
100
1
100
1
1
100

700007008
700006299
760341181
760031393
700011372
760034199
760031401

Jumper Connector
Product Number

Detailed Description

Fiber Type

Color

Qty/Pkg

Material ID

P1000A-Z-125
P1000A-Z-125R
P1002A-Z-125
P1002A-Z-125/100
P1002A-Z-125R
P1002A-Z-125R/100
P1100A-Z-125
P1100A-Z-125R

LC Connector for 1.6 mm Cordage, Simplex

LC Connector for 1.6 mm Cordage, Simplex, Pre-radiused
LC Connector for 1.6 mm Cordage, Duplex
LC Connector for 1.6 mm Cordage, Duplex
LC Connector for 1.6 mm Cordage, Duplex, Pre-radiused
LC Connector for 1.6 mm Cordage, Duplex, Pre-radiused
LC Connector for 1.6 mm Cordage, Simplex
LC Connector for 1.6 mm Cordage, Simplex, Pre-radiused

MM
MM
MM
MM
MM
MM
SM
SM

Beige
Beige
Beige
Beige
Beige
Beige
Blue
Blue

1
1
1
100
1
100
1
1

700004260
760034140
700006992
700006307
760034157
760034165
700071830
760034173

201

Fiber
Connectors
& Adapters

SC Connectors
The SC Multimode Fiber Optic Connector is a field mountable, tuneable
connector which utilizes a domed zirconia ferrule for fiber alignment,
and push-pull hardware that provides easier connections as well as
high optical stability. The connector can be used in high-density
applications while not being affected by axial cable loads. The cable
is crimped to the outer hardware and therefore prevents momentary
disconnect when axial load is placed on the cable. Available in
multimode and singlemode versions.
There are two series of SC connectors. Both have equivalent performance in general. While the SC-B series connectors offers
lower cost to customers, the SC-A series connector can achieve improved performance when tuned in the field.
SC connector plugs can be mounted on fibers in the field using the 1032B5, 1032B6 or 1032F1 Tool Kit. When mounting to only
0.9 mm buffered fiber, the 1032H Tool Kit may be used. The D-181919 Kit can be used when mounting jumper SC connectors
onto 1.6 mm cordages.

Physical Specifications:

Length: A Series: 2.2 in (5.6 cm)

B Series: 2.05 in (5.2 cm) for 900 m application
B Series: 2.2 in (5.6 cm) for 3 mm application
Operating Temperature: -40F to 185F (-40C to 85C)
Min. Axial Load: Cable: 29.92 lbs (13.6 kg)
Buffer: 1.98 lbs (0.9 kg)

Optical Specifications:

Average Loss: Multimode: 0.3 dB

Singlemode: 0.2 dB (tuned), 0.3 dB (untuned) for
A-series SC connectors
Maximum Loss: MM and SM: 0.5 dB
Mating Durability: Insertion loss change for 200 reconnects:
<0.3 dB (test per Telcordia GR326)
Temperature Stability -40F to 167F (-40C to 75 C): = < 0.3 dB increase

SC-B Series Connectors

Product Number

Detailed Description

Fiber Type

Color

Qty/Pkg

Material ID

P6201B-Z-125

BTW SC-B Connector for 0.9 mm Buffered Fiber

MM

Beige

760070070

P6201B-Z-125-100

BTW SC-B Connector for 0.9 mm Buffered Fiber

MM

Beige

100

760007088

P6200B-Z-125

SC-B Connector for 3.0 mm Cordage, Simplex

MM

Beige

760007047

P6200B-Z-125-100

SC-B Connector for 3.0 mm Cordage, Simplex

MM

Beige

100

760007054

P6200B-Z-125-1000

SC-B Connector for 3.0 mm Cordage, Simplex, Bulk

MM

Beige

1000

760007062

P6001B-Z-125

BTW SC-B Connector for 0.9 mm Buffered Fiber

SM

Blue

760007112

P6001B-Z-125-100

BTW SC-B Connector for 0.9 mm Buffered Fiber

SM

Blue

100

760019562

P6000B-Z-125

SC-B Connector for 3.0 mm Cordage, Simplex

SM

Blue

760007096

P6000B-Z-125-100

SC-B Connector for 3.0 mm Cordage, Simplex

SM

Blue

100

760019554

P6000B-Z-125-1000

SC-B Connector for 3.0 mm Cordage, Simplex, Bulk

SM

2A2

Duplex Clip for SC-B Connectors

Blue

1000

760007104

Black

10

760005132

SC-A Series Connectors

Fiber
Connectors
& Adapters

Product Number

Detailed Description

Fiber Type

Color

Qty/Pkg

Material ID

P6201A-Z-125

BTW SC-A Connector for 0.9 mm Buffered Fiber

MM

Beige

700007024

P6201A-Z-125-100

BTW SC-A Connector for 0.9 mm Buffered Fiber

MM

Beige

100

700004278

P6200A-Z-125

SC-A Connector for 3.0 mm Cordage, Simplex

MM

Beige

700007024

P6200A-Z-125-100

SC-A Connector for 3.0 mm Cordage, Simplex

MM

Beige

100

700004278

P6001A-Z-125

BTW SC-A Connector for 0.9 mm Buffered Fiber

SM

Blue

700006976

P6000A-Z-125

SC-A Connector for 3.0 mm Cordage, Simplex

SM

Blue

700006984

2A1

Duplex Clip for SC-A Connectors

Black

1000

700005358

BTWBehind the Wall

202

STII Connectors
The STII Connector is a keyed ceramic fiber optic connector
that uses a bayonet-type ramped-latching mounting
arrangement. The STII Connectors feature either domed
zirconia or flat alumina ferrules. STII Connectors will accept
125 micron outside diameter multimode fiber.
The design of the STII provides high optical performance
and easy mounting in a rugged, compact connector plug.
The STII can mount on either 0.9 mm buffered fiber, 2.4 mm or 3.0 mm cordage (or equivalent). The STII is available in
both singlemode and multimode.
STII Connector plugs can be mounted on fibers in the field using the 1032B5, 1032B6 or 1032F1 Tool Kits. The 1032H Tool Kit may
be used when mounting connectors on 0.9 mm fiber.

Optical Specifications:

Physical Specifications:

Multimode Average Loss: 0.3 dB

Singlemode Average Loss: 0.3 dB

Length: 2.2 in (5.6 cm)

Temperature Stability -40F to 185F (-40C to 85C): <0.1 dB increase
Loss Repeat (500 Reconnectors): <0.2 dB
Min. Axial Load: Cable: 35 lbs (15.9 kg)

STII Connector
Product Number

Detailed Description

Fiber Type

Cordage OD(mm) Qty/Pkg

Material ID

P2020C-Z-125

STII Connector, Domed Zirconia Ferrule

MM

0.9/2.4/3.0

700004328

P2020C-Z-125-100

STII Connector, Domed Zirconia Ferrule

MM

0.9/2.4/3.0

100

700004310

P2020C-C-125

STII Connector, Flat Alumina Ferrule

MM

0.9/2.4/3.0

700004583

P2020C-C-125-100

STII Connector, Flat Alumina Ferrule

MM

0.9/2.4/3.0

100

700004336

P3020A-Z-125

STII Connector, Domed Zirconia Ferrule

SM

0.9/2.4/3.0

700011067

Fiber
Connectors
& Adapters

203

STII+ Connectors
The STII+ Connector is a keyed fiber optic connector
that uses a bayonet-type ramped-latching mounting
arrangement. The STII+ has a patented enhanced hardware
design which provides high performance and easy field
mounting. It features a domed zirconia ferrule and utilizes
a PC polish to ensure fiber-to-fiber physical contact for low
loss and low reflections. Its enhanced hardware and pull
proof design provides high mechanical stability.
STII+ Connector plugs can be mounted on fibers in the field using the 1032B5, 1032B6 or
1032F1 Tool Kit. When mounting to only 0.9 mm buffered fiber, the 1032H Tool Kit may be used. These connectors can be used
on a 1.6 mm cordage or mini-breakout cable with the addition of tool kit D-182918 tool.

Physical Specifications:

Length: 2.2 in (5.6 cm)

Loss Repeatability: (500 insertions) < 0.30 dB
Min. Axial Load: Cable: 15.9 kg (35.0 lbs)
Buffer: 0.9 kg (1.98 lbs)
Average Loss: 0.3 dB
Operating Temperature: -40F to 167F (-40C to 75C)

STII+ Connector
Product Number

Detailed Description

Cordage OD(mm) Qty/Pkg

Material ID

P2071A-Z-125

STII+ Connector for 0.9 mm Buffered Fiber Only MM

Fiber Type

0.9

700002363

P2071A-Z-125-100

STII+ Connector for 0.9 mm Buffered Fiber Only MM

0.9

100

700005549

P2070A-Z-125

STII+ Connector

MM

0.9/3.0

700002389

P2070A-Z-125-100

STII+ Connector

MM

0.9/3.0

100

700005556

P3071A-Z-125

STII+ Connector, for 0.9 mm Buffered Fiber Only SM

0.9

700002223

P3070A-Z-125

STII+ Connector

0.9/3.0

700002231

SM

Fiber
Connectors
& Adapters

204

Fiber Optic Adapters

Fiber optic adapters are used in conjunction with the
fiber optic panels to ensure proper alignment of the
fibers when mating two connectors. The adapters are
offered in multimode and singlemode, and are colorcoded for easy fiber identification. The adapters are
generally offered as individually packed with dust
cap included. For selected adapters, packages of 100
adapters are offered.
Two series of adapters are offered, C series and
A series. The C series adapters are designed to be
used with the 600, 1000, and 12/24 series panels,
while the A series adapters are intended to be used with the
1200 series panel.

LC Adapters
Product Number

Detailed Description

Fiber Type

Color

Qty/Pkg

Material ID

C1001B-2-LS

LC Duplex Adapter, LazrSPEED

MM

Aqua

108622887

C1001B-1-LS

LC Simplex Adapter, LazrSPEED

MM

Aqua

760025338

C1001B-2

LC Duplex Adapter, OptiSPEED

MM

Beige

700002355

C1001B-1

LC Simplex Adapter, OptiSPEED

MM

Beige

700002173

C1101A-2

LC Duplex Adapter, TeraSPEED

SM

Blue

700002215

C1101A-1

LC Duplex Adapter, TeraSPEED

SM

Blue

700002132

C1201B-1

LC-APC Simplex Adapter, TeraSPEED

SM

Green

760036293

SC Adapters
Product Number

Detailed Description

Fiber Type

Color

Qty/Pkg

Material ID

C6061A-4-LS

SC Duplex Adapter, LazrSPEED

MM

Aqua

108622895

C6061A-4

SC Duplex Adapter, OptiSPEED

MM

Beige

700004880

C6061A-4-100

SC Duplex Adapter, OptiSPEED

MM

Beige

100

700004872

C6001A-4

SC Simplex Adapter, OptiSPEED

MM

Beige

108223181

C6060A-4

SC Duplex Adapter, TeraSPEED

SM

Blue

700004815

C6000A-4

SC Simplex Adapter, TeraSPEED

SM

Blue

700004807

C6000A-5

SC Simplex Adapter, TeraSPEED, Flangeless

SM

Blue

700004799

C6800A-4

SC-APC Simplex Adapter, TeraSPEED

SM

Green

760036277

C6868A-4

SC-APC Duplex Adapter, TeraSPEED

SM

Green

760036285

Product Number

Detailed Description

Fiber Type

Qty/Pkg

Material ID

C2000A-2

ST Adapter with Hex Mounting Nut

MM

700004864

C2000A-2-100

ST Adapter with Hex Mounting Nut

MM

100

700004906

A2000

ST Adapter with Circular Mounting Nut

MM

700004914

C3000A-2

ST Adapter with Hex Mounting Nut

SM

700011133

A3000

ST Adapter with Circular Mounting Nut

SM

760000638

ST Adapters

205

Fiber
Connectors
& Adapters

Multiport Adapter
Multiport adapters are designed to use with the LSTSY and
1100SY shelves to provide proper alignment of the mating
fiber optic connectors. They are offered in a strip of 12 LC,
6 SC or 6 ST adapters, and are equipped with the hinged
dust caps, which can be mounted on both top and
bottom side of the adapter strip.
The multiport adapters are offered in multimode or
singlemode, and are color-coded for easy fiber identification. They are packaged
either as individual or as 10 per pack.

Multiport Adapters
Product Number

Detailed Description

Fiber Type

Color

Qty/Pkg

Material ID

C12-MM-LC-LS

LC Multiport Adapter, LazrSPEED

MM

Aqua

700207004

C12MM-LC-LS-10

LC Multiport Adapter, LazrSPEED

MM

Aqua

10

108626243

C6-MM-SC-LS

SC Multiport Adapter, LazrSPEED

MM

Aqua

700207012

C6-MM-SC-LS-10

SC Multiport Adapter, LazrSPEED

MM

Aqua

10

108626250

C6-MM-ST-LS

ST Multiport Adapter, LazrSPEED

MM

Aqua

700207020

C6-MM-ST-LS-10

ST Multiport Adapter, LazrSPEED

MM

Aqua

10

108626268

C12-MM-LC

LC Multiport Adapter, OptiSPEED

MM

Beige

700206949

C12-MM-LC-10

LC Multiport Adapter, OptiSPEED

MM

Beige

10

108168824

C6-MM-SC

SC Multiport Adapter, OptiSPEED

MM

Beige

700206956

C6-MM-SC-10

SC Multiport Adapter, OptiSPEED

MM

Beige

10

108168774

C6-MM-ST

ST Multiport Adapter, OptiSPEED

MM

Beige

700206964

C6-MM-ST-10

ST Multiport Adapter, OptiSPEED

MM

Beige

10

108168808

C12-SM-LC

LC Multiport Adapter, TeraSPEED

MM

Blue

700206972

C12-SM-LC-10

LC Multiport Adapter, TeraSPEED

MM

Blue

10

700007891

C6-SM-SC

SC Multiport Adapter, TeraSPEED

MM

Blue

700206980

C6-SM-SC-10

SC Multiport Adapter, TeraSPEED

MM

Blue

10

700007917

C6-SM-ST

ST Multiport Adapter, TeraSPEED

MM

Blue

700206998

C6-SM-ST-10

ST Multiport Adapter, TeraSPEED

MM

Blue

10

700007909

Fiber
Connectors
& Adapters

206

M81 Series Modular

Fiber Optic Adapter with
Mounting Module
The M81 M-Series Modular Coupling/Adapter modules are intended to be used
as fiber optic outlets for FTTX applications.
The M81LS duplex adapters include an integrated fiber management spool
that provide a duplex LC connection with fiber management. The adapters
can be used in modular faceplates as shown in the picture. They are colorcoded for ease of fiber type identification, and provide slack management to
maintain proper bend radius behind the wall.
The M81ST-B adapter module comes packaged with an M81 type mounting
module with a circular opening and an ST fiber optic Coupling/Adapter (A2000
multimode). The ST Coupling/Adapter is mounted on the module via a locking
washer and nut. The assembly mates two STII fiber optic connectors.
The M81SC-B adapter module comes packaged with an M81 type mounting
module with a rectangular opening and a simplex SC fiber optic Coupling/Adapter (C6000A-5). The SC Coupling/
Adapter snaps into the rectangular opening of the M81 type mounting module. The assembly mates two simplex SC fiber optic
connectors.
The M81ST-B and the M81SC-B contain four collars: black, ivory, white and gray. The M81LC-029 is clear.
The M81LC-029 adapter module comes packaged with an M81 type mounting module with a rectangular opening and an LC
adapter. The LC Coupling/Adapter snaps into the rectangular opening of the M81 type mounting module. A minimum 1.5 inch
diameter fiber bend radius behind the adapter is recommended.
Once assembled, the coupling/adapter modules can be mounted in any of the M-Series faceplates, surface mount boxes,
consolidation point boxes, M1000 MULTIMAX panels, frames, or mounting collars.

Physical Specifications:

Height: M81ST-B, M81SC-B: 0.69 in (17 mm)

M81LC-029: 0.69 in (17 mm)
Width: M81ST-B, M81SC-B: 0.73 in (18 mm)
M81LC-029: 0.65 in (16 mm)
Depth: M81ST-B, M81SC-B: 0.39 in (9.6 mm)
M81LC-029: 0.3 in (7.4 mm)

Product Number

Detailed Description

Fiber Type

Color

Material ID

M81LS-MM Spool

LC Duplex Adapter w/ Fiber Spool

MM

Beige

108562174

M81LS-SM Spool

LC Duplex Adapter w/ Fiber Spool

SM

Blue

700007420

M81LS-LS Spool

LC Duplex Adapter w/ Fiber Spool

MM

Aqua

108623109

M81SC-B

SC Coupling/Adapter with Mounting Module

SM/MM

Blue

108009416

M81ST-B

ST Coupling/Adapter with Mounting Module

MM

M81LC-029

LC Adapter with Clear Collar

MM

M81LC-029-Collar

Clear Plastic Collar for LC, Pack of 25

108009408
Beige

107782641
760010090

207

Fiber
Connectors
& Adapters

1032B5, 1032B6 and 1032F1

Tool Kits for STII, STII+,
SC and LC Connectors
The 1032B5 Tool Kit contains all the tools needed to assemble ST, SC and
LC connectors on cordage or buffered fiber using EZ or epoxy methods.
A 200A 120 VAC Curing Oven is included.
The 1032B6 Tool Kit is for international use, where the only difference
from the 1032B5 is that the 200A Curing Oven is replaced by the 200A1
220 VAC Curing Oven.
The 1032F1 does not contain a Curing Oven. It is used with the STII+ EZ
and SC EZ Installation Kits where no oven is required.
Connectors and consumable kits must be ordered separately.
Detailed Description

Fiber
Tools &
Consumables

Kit Quantity

Replacement Quantity

Material ID

200A 120VAC Curing Oven (1032B5 only)

700008055

200A1 220VAC Curing Oven (1032B6 only)

700008048

1510B Crimping Tool

700008220

1510A1 Polishing Tool (Plastic)

700008162

300B Microscope

700008063

700A Stripping Tool

700008261

600B1 ST Connector Holders

12

12

1026A Heat Strip Tool

971-1-2 Holder Blocks

700008139

975A Cleaving Tools

700008287

Scissors

700008022

Alcohol Bottle

700008105

1510C Curing Fixture, SC

12

12

Acrylic Plate

Stripping Tool (R4366)

7000011158

Rubber Polishing Pad

10

700005564

1039B Cut Length Template (STII+ & SC)

Micro Clips (1043A)

15

700005143
Unable to order individually

700008212
Unable to order individually

700008204
Unable to order individually

Instruction Manual

Unable to order individually

Instruction Sheet (STII+ EZ)

Unable to order individually

Instruction Sheet (STII+ Epoxy) (1032B5 and 1032B6 only)

Unable to order individually

Instruction Sheet (SC Epoxy) (1032B5 and 1032B6 only)

Unable to order individually

Instruction Sheet (SC EZ)

Unable to order individually

1039A Cut Length Template (STII & Biconic)

Unable to order individually

Product Number

Detailed Description

Material ID

1032B5

Epoxy SC/ST/LC Connector Tool Kit (North American)

700006026

1032B6

Epoxy SC/ST/LC Connector Tool Kit (International)

700005960

1032F1

EZ SC/ST Tool Kit (Curing Oven Not Included)

700005929

208

1032H Mini Tool Kit

for LC, SC and ST
Connectors
The 1032H Mini Tool Kit is intended for connectorization of buffered
fiber with LC, SC and ST multimode or singlemode connectors using the
anaerobic (EZ) method.
The kit does not contain the crimp tool for cordage connectorization.
Crimp tool must be ordered separately. Adhesive must be ordered
separately.

Detailed Description

Kit Quantity

Polishing Plate

Unable to order individually

Rubber Pad

Unable to order individually

Stripping Tool (R4366)

105114581

1510A Polishing Tool

700011158

600B1 ST Connector Holders

12

12

700005143

LC Connector Holders

12

12

700005135

700008022

700005887

700002157

Scissors

LC/ST/SC Instructions

LC Microscope with Adapter

Universal Microscope Adapter

Replacement Quantity

Material ID

Unable to order individually

LC Cut Length Template

700007974

T2001A Polishing Tool (Plastic)

700008170

1510C SC Curing Fixture

12

700008212

975A Cleaving Tool

700008287

Eye Loupe

Unable to order individually

Product Number

Detailed Description

Material ID

1032H Mini Tool Kit

Kit for Terminating BTW ST/SC + LC Connectors EZ Method

700005838

Fiber
Tools &
Consumables

209

D-182737 Tool Upgrade

Kit for STII+ and SC
Connectors
This upgrade kit, when added to the 1032B, 1032B1 or 1032F
Tool Kit, provides the necessary tools and instructions to
field-assemble STII+ and SC multimode or singlemode
connectors on 3.0 mm cordage.

Detailed Description

Kit Quantity

Replacement Quantity

Material ID

1039B Cut Length Template (STII+ & SC)

700008204

Universal Microscope Adapter

700002157

Modified SM/MM SC Grips

10

107480022

1510B Crimping Tool

700008220

1510A1 Polishing Tool, Plastic

700008162

600B1 ST Connector Holders

12

12

700005143

1510C Curing Fixture

12

12

700008212

Rubber Polishing Pad

10

700005564

Instruction Sheet (STII+ EZ)

Unable to order individually

Instruction Sheet (SC EZ)

Unable to order individually

Instruction Sheet (SC Epoxy) (1032B5 and 1032B6 only)

Unable to order individually

Instruction Sheet (STII+ Epoxy)

Unable to order individually

Product Number

Detailed Description

Availability

Material ID

D-182737

Upgrades 1032B, 1032B1 and 1032F Tool Kits

Non-stock

700005952

Fiber
Tools &
Consumables

210

D-182905 LC
Connector Termination
Upgrade Tool Kit
This upgrade kit, when added to the 1032B5 or 1032F1 Tool Kit, provides
the necessary tools and instructions to field assembly LC multimode or
singlemode connectors on 900 micron buffered fiber.

Detailed Description

Kit Quantity

Replacement Quantity

Material ID

LC Polishing Fixture
LC Microscope with Adapter
LC Connector Holder
Plastic Polishing Pad
Instruction Sheet

1
1
12
1
1

1
1
12

700008196
700005887
700005135
Unable to order individually
Unable to order individually

Product Number

Detailed Description

Material ID

D-182905 KIT

LC Upgrade Kit, BTW only

700005895

D-182959 LC
Connector Termination
Upgrade Tool Kit
The D-182959 Tool Upgrade Kit for LC connectors provides the tools
such as crimp jaws, heater pipes, and a polishing puck to terminate
the LC connector onto either 900 micron buffered fiber or 1.6 mm
cordage. The D-182959 Kit is to be used in concert with the 1032B5
and 1032F1 Tool Kits.

Detailed Description

Kit Quantity

Replacement Quantity

Material ID

T2001A Polishing Tool

LC Microscope
LC BTW Connector Holders
LC Jumper Connector Holders
971A-2 Holder Block
LC Cut Length Template
LC Instructions
1510LC Crimping Tool
LC Stripper Guide Tube for 1026A
Ultra-Fine-Point Permanent Pen
Heat Tube Assemblies
C1001B-2 Multimode LC Adapter

1
1
12
12
1
1
1
1
1
1
6
1

1
1
12
12
1
5

700008170
700005887
700005135
700005846
700008139
700007974
Unable to order individually
700008154
700008147
Unable to order individually
700002330
700002355

Product Number

Detailed Description

Material ID

D-182959 KIT

LC Upgrade Kit

700005853

1
1
6
1

211

Fiber
Tools &
Consumables

Tool Kit Components

Replacement kit components for the following tool kits: 1032B5, 1032B6, 1032F1, D-182737, D-182905 and 1048B.
Detailed Description

Replacement Quantity

Material ID

Wire Stripper

700008014

1039B Cut Length Template/Scale

700008204

Universal Microscope Adapter

700002157

1510B Crimping Tool

700008220

200A 120 VAC Curing Oven (1032B5 Only)

700008055

700A Stripping Tool

700008261

600B1 ST Connector Holders

12

700005143

971A-1 Holder Blocks

700008279

975A Cleaving Tool

700008287

Scissors

700008022

6 in Scale

700008030

Alcohol Bottle

700008105

1510C SC Curing Fixture

12

700008212

Stripping Tool (R4366)

700011158

Rubber Polishing Pad

10

700005564

LC Microscope with Adapter

700005887

LC BTW Connector Holders

12

700005135

T2001A Polishing Tool (Plastic)

700008170

LC Jumper Connector Holders

12

700005846

LC Cut Length Template

700007974

1510LC Crimp Tool

700008154

LC Stripper Guide Tube for 1026A

700008147

Heat Tube Assemblies for 200A Oven

700002330

LC Adapter Brush

700008089

LC BTW Connector Holder - Bulk Pack

700005101

LC BTW Connector Holder

700005093

LC Connector Holder w/o Adapter

700005077

LC Plug Housing, Beige

700005168

Fiber
Tools &
Consumables

212

Fiber Tool Kit

Miscellaneous Kits for Fiber Optic Connector Cable Assembly/Terminations.

Product Number

Detailed Description

Material ID

KIT-1049A Tool ST Type C

Wrench for ST Adapter Circular Nut

700006059

KIT-5.00 EA Grip UC-55

700005770

KIT-D181618 Parts 1 EA L

700006141

KIT-D181622 Parts 25 FT

700006133

KIT-D182037

700006091

KIT-D182038

105501415

KIT-D182610 CLNG SM ST M

700006042
700006034

KIT-D182611 CLNG MM ST M
KIT-D-182709 Parts ST CO

Consumable Kit with Adhesive

106736937

KIT-D182847 Parts

250-pc. STII + and SC Consumable Kit

700005903

KIT-D183017 FBR Optic LC

700005820

KIT-DS-1 FBR Optic LIU K

106626682

KIT-I Cap Plug, CONN P20

700005804

KIT-LazrSPEED Product Sample Kit

108684416

KIT-P2020C-C-Parts

700005911

KIT-ST Extender Cap Part

700005978

Fiber Tools
Miscellaneous Kits for Fiber Optic Connector Cable Assembly/Terminations.

Detailed Description

Material ID

LC SM Tuning Tool

700008113

LC SM Tuning Wrench

700008121

TOOL-102A, STII Crimp Tool

700008253

TOOL-F-62161 Curing

700008246

Fiber
Tools &
Consumables

213

Breakout Kits
The Breakout Kit prepares loose tube fiber optic cable quickly
and reliably when premise network installations require
indoor field connectorization. Available in 6 fiber and 12 fiber
units, the kit transitions optical fiber from 2.5 mm and 3.0
mm buffer tubes to 900 m protective tubing. The Breakout
Kit is simple to use since no epoxy or special tools are
required.

Features and Benefits:

6 fiber and 12 fiber units available

24 inch, 900 m tubing length
Simple, snap-together housing
Flexible, yet rugged, 900 m tubing for easy routing and fiber protection
Color-coded tubing for easy fiber identification
Allows fast, reliable breakout of loose tube cable
Simple to assemble, no epoxy or special tools needed
Easy fiber identification
ISO 9001 and ISO 14001 certified manufacturer; TL 9000 registered quality management system

Detailed Description

Material ID

6 Fiber Breakout Kit

760018820

12 Fiber Breakout Kit

760018838

Unit Splitters
The Unit Splitter is a pitchfork-shaped apparatus used for gel-blocking and
organizing fibers when prepping outside plant cable. It is the ideal device
to split bundled fibers into separate groups for routing to locations for
shelves and cabinets.

Fiber
Tools &
Consumables

Product Number

Detailed Description

Material ID

D-181781

6 to 1 Unit Splitter for Outdoor Cable Diameter of 0.41 inch

700011125

D-181683

8 to 1 Unit Splitter for Outdoor Cable Diameter of 0.41 inch

700006125

D-182806

6 to 1 Unit Splitter Fits 0.16 in (4.1 mm) and 0.20 in (5.1 mm) Core Tubes

700010960

214

D-181755 PVC
Buffer Tubing
Consumable Kit
The PVC Buffer Tubing Kit contains buffer tubing and cable end
prep materials for direct termination of connectors on outside
plant cable. This kit will buffer approximately 100 outside plant
fibers. Order B sealant separately.

Detailed Description

Kit Quantity Replacement Quantity Material ID

201 in (64 mm) Buffer Tube (900 micron)

1 Reel

5 Reels

700008300

Syringes

10

700007982

Wire Marker Book

700007966

Rosin Bag

0.166 in (4.2 mm) ID Clear PVC Tubing

2 in (61 cm)

700002405
Unable to order individually

0.234 in (6 mm) ID Clear PVC Tubing

1 in (30.5 cm)

Unable to order individually

0.294 in (7.5 mm) ID Clear PVC Tubing

1 in (30.5 cm)

Unable to order individually

0.095 in (2.9 mm) ID x 0.016 in (0.4 mm) Wall White PVC Tubing

25 in (7.6 cm)

Unable to order individually

0.187 in (4.8 mm) ID Heat Shrinkable Tubing

2 in (61 cm)

Unable to order individually

D-181683 Eight Unit Splitter (Re-orderable in Unit Splitter Family) 1

700006125

D-181781 Six Unit Splitter (Re-orderable in Unit Splitter Family)

700011125

Instruction Sheet

Unable to order individually

Product Number

Detailed Description

Material ID

D-181755

PVC Buffer Tubing Kit

700006117

D-183016 Splitter Kit

The Splitter Kit contains components and consumables for blocking
the gel in central core tubing common in outside plant cable. It also
contains components for buffering bare fibers with 900 micron tubing
for termination onto fiber optic connectors. Order B sealant separately.
The D-183016 Splitter Kit contains the following components:
Clear Tygon Tubing
Qty 2
Cable Ties
Qty 10
Syringes (3 cc)
Qty 2
Syringe Tips
Qty 2
White PVC Tubing (0.095 Diameter)
25 ft
Splitter Kit with TALC Bag
Qty 2
D183016 Kit Installation Instructions
Qty 1

Fiber
Tools &
Consumables

Product Number

Detailed Description

Material ID

D-183016

Splitter Kit

108459488

215

Fiber Optic Connector Consumable Kits

The Epoxy and EZ Fiber Optic Apparatus (FOA) field assembly kits
contain consumable supplies used to terminate connectors using
the Epoxy and EZ method.
EZ adhesives (760000810) kit will include all adhesives required
to complete EZ field installation of SC/STII+/LC connectors. The
kit will consist of Loctite Super Bonder 495, 7090 Solvent-less
Primer and Loctite 648 Retaining Compound.

Field Installation Kits

Adhesives and epoxy must be ordered separately.

Construct the product code from the following options:

Type

Connector

Method

# of Connectors

C = Consumables

1.25 M = LC Multimode

Z = EZ

1.25 S = LC Singlemode

P = Epoxy

(not required for

tools)

2.50 M = SC/STII+
Multimode

C = Combined

2.50 S = SC/STII+
Singlemode

R = Repair

100
200

BTW = Behind the Wall

SC/ST/LC

Product Number

Detailed Description

Application

Material ID

Kit-C-2.50M-Z-100

Consumable Kit to Install 100 SC/STII+ Multimode

Multimode STII+/SC EZ Method

700218035

Multimode STII+/SC Epoxy Method

700218043

Singlemode STII+/SC EZ Method

700218050

Singlemode STII+/SC Epoxy Method

700218068

Multimode LC Epoxy/EZ Combined

700218084

Singlemode LC Epoxy/EZ Combined

700233638

Primer/Bonder/Retaining Compounds

760000810

Consumable Kit

700218076

Connectors Using the EZ Method

Kit-C-2.50M-P-100

Consumable Kit to Install 100 SC/STII+ Multimode

Connectors Using the Epoxy Method

Kit-C-2.50S-Z-100

Consumable Kit to Install 100 SC/STII+ Singlemode

Connectors Using the EZ Method

Kit-C-2.50S-P-100

Consumable Kit to Install 100 SC/STII+ Singlemode

Connectors Using the Epoxy Method

Kit-C-1.25M-C-100

Consumable Kit to Install 200 LC Multimode

Connectors Using the Epoxy or EZ Method

Kit-C-1.25S-C-200
Fiber
Tools &
Consumables

Consumable Kit to Install 200 LC Singlemode

Connectors Using the Epoxy or EZ Method

EZ Adhesives

Loctite 7090 Solvent-less Primer/495 Super

Bonder/648 Retaining Compound

Kit-C-2.50 M-R-100

Consumable Kit for Repairing ST & SC Connectors

216

D-182977 Singlemode
Epoxy LC
Consumable Kit
The D-182977 Consumable Kit contains enough supplies
to mount approximately 200 singlemode flat endface LC
connectors using the heat-cured epoxy method. This kit can
also be used to terminate multimode LC connectors (epoxy
method).

Detailed Description

Kit Quantity

Replacement Quantity

Material ID

Wipes

10

250

700006166

Music Wire

700008394

Syringes

75

10

700007982

Dispensing Tips

125

125

700011141

Epoxy

15

Clear Spacers

10

700006109
Unable to order individually

Foam Pad (white)

10

Type J Polishing Paper (purple)

20

20

700006661

Unable to order individually

Type F Polishing Paper

700006703

Type K Polishing Paper

700006687

Type L Polishing Paper

10

10

700006679

LC Adapter Brush

700008089

Product Number

Detailed Description

Material ID

D-182977

SM Epoxy LC Consumable Kit

700005317

Fiber
Tools &
Consumables

217

Consumable Kit Components

Replacement kit components for the following Consumable Kits: D-182804, D-182720, D-181755, D-182738, D-182739.
Detailed Description

Replacement Quantity

Material ID

Type A Polishing Paper

100

700006737

Type D Polishing Paper

100

700006711

Buffer Tube Reel 900 micron 210 ft (64.1 m)

700008360

Wire Marker Book

700007966

Rosin Bag

700002405

Wipes

250

700006166

Music Wire

700008394

Syringes

10

700007982

Dispensing Tips

125

700011141

Type F Polishing Paper (Yellow Round)

10

700006703

Type J Polishing Paper (Purple)

20

700006661

Type G Polishing Paper (Green)

25

760006205

Type L Polishing Paper

10

700006679

Type K Polishing Paper

700006687

B Sealant 3 oz

700010911

Bottled Adhesive

D182985 SM EZ Consumable Kit

700005309

D182984 MM EZ Consumable Kit

108340829

700002181

Fiber
Tools &
Consumables

218

Advanced Connectivity Solutions

iPatch System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
AirSPEED/Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224
Power over Ethernet (PoE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

219

Advanced
Connectivity

iPatch Intelligent
Patching System

Advanced
Connectivity

The SYSTIMAX iPatch System integrates copper and fiber hardware

and software to provide real-time information and control of the
telecommunications infrastructure. The iPatch System provides
the network administrator greater vision, the cabling administrator
complete management and the cabling technician intelligence
to optimize physical layer management and network efficiency,
improve reliability and reduce downtime. The iPatch System adds
real-time monitoring of both copper and fiber patch connections
and integration with network management software. The iPatch
System continually monitors and verifies patch panel port
connections and logs changes in a central database. Electronic
work orders eliminate tedious paper based administration and
improve productivity. Work is guided at each patch panel
by electronic visual and audio prompts to virtually eliminate
patching errors. The user is instantly alerted to critical changes
or conditions that require immediate attention and resolution.

The iPatch System Brings Order to Chaos

Data and voice connections live or die in crowded telecommuncations rooms where a single misplaced
patch cord can wreak havoc and increase downtime. The iPatch System provides one touch patch cord tracing, with both visual
and audio prompts to guide every connection. It continuously monitors, verifies and logs port connections to keep your system
running smoothly and instantly alert you to problems.

Vision
Provides the network administrator greater vision into and control over the entire communication network with the
integration of network management applications and physical layer management capabilities over the Simple Network
Management Protocol (SNMP) platform.

Management
Provides the cabling administrator the ability to manage critically important horizontal and backbone connections.

Intelligence
Provides the cabling technician straightforward connectivity intelligence for error-free and greater efficiency when
executing move, add, change (MAC) work orders and tracing operations.

How the iPatch System Works

Each rack is equipped with a Rack Manager Plus device, which monitors every port in every patch panel. This information is sent to
a central database, where the System Manager Software shows a continuously updated view of cabling connectivity information.
(MAC) Work orders can be scheduled with point-and-click ease. Utilizing the service provisioning algorithm, System Manager will
identify the optimal cabling path, and issue an electronic work order.
At the scheduled time, the order is sent electronically to the appropriate iPatch Rack Manager Plus in the telecommunications
room where the jobs label will appear on LCDs and the jobs green indicator will be lit to help the technician instantly identify
the racks where a change must be made.
When the softkey under the jobs label is pressed, the work order details are displayed on the LCD screen of the appropriate racks
and two bright red LEDs light up, one above each patch panel port, to guide the technician in executing each (MAC) work order.
When the (MAC) work order is executed, the change is verified by a confirmation tone and logged into the database. If an error
is encountered while executing the (MAC) work order, a loud warning buzz instantly calls attention to the error so it can be corrected on the spot.

220

iPatch System
Components
iPatch Panels
The iPatch Copper Panels are built on the reliable, high-performance
SYSTIMAX 1100 GigaSPEED patch panel platform.
The iPatch Fiber Shelves are SYSTIMAX 600-type fiber shelves, and come
equipped with 12 duplex SC couplers (24 fibers) or 24 duplex LC couplers (48 fibers) that support the SYSTIMAX fiber portfolioLazrSPEED,
TeraSPEED and OptiSPEED applications. The iPatch Fiber shelves support
both simplex and duplex patch connections.
Each iPatch Panel on a rack is connected to the iPatch Rack Manager
Plus via a panel bus. The iPatch Panel monitors patch connections by
sensing the insertion and removal of patch cord plugs. It relays this
information to the Rack Manager Plus,, which then records it in the database. The iPatch Panel features a
trace button and an LED above each port to help guide technicians performing patching activities.

iPatch Rack Manager Plus

The universal Rack Manager Plus replaces and combines all features of
the previous generation of Rack and Network Managers. The iPatch
Rack Manager Plus is installed on each rack in the telecommunications
equipment room. It communicates with and manages up to 40 1U iPatch
panels installed on the rack. The Rack Manager Plus monitors patch
connection changes at its rack and records them in its database. It reports
the changes to the iPatch System Manager software database via a LAN
connection. The Rack Manager Plus is also equipped with an LCD display.
Information provided on the display assists the technician with performing
scheduled moves, adds and changes, as well as patch cord tracing. In addition,
the Rack Manager Plus has three LED indicators to alert the user of an active
trace, jobs and alarms.

Technical Specifications:

Microprocessor: 16-bit, 16 MHz 18LF8720 processor

Downloadable Software: From host software via LAN
Program Storage: Flash memory
Data Storage: EEPROM
Program Data Retention Without Power: Minimum 10 years
Number of Panel Connections per Rack: Maximum 40
Number of Rack Manager Plus Units per Rack Manager LAN:
Maximum 100
Height: 3.375 in (8.6 cm) (2U)
Width: 19 in (48.3 cm)
Depth: 0.65 in (1.7 cm)
Recommended Mounting Height: Approximately 65 in (165 cm)
above the floor, measured from the top edge of the Rack Manager
Plus (the 11th 1U slot down from the top of a 7 foot rack)
Display Type: LCD graphics display
Display Size: 5.2 in (13.2 cm) measured diagonally; 240 x 64 pixels
Display Backlighting: White LED
Operational Environment: 14F to 158F (10C to 70C),
95% non-condensing humidity
Network: Ethernet
Network Protocol: Transmission Control Protocol/Internet Protocol
(TCP/IP)
Network Platform: 10BASE-T or 100BASE-T

Standards:

Safety:
CAN/CSA-C22.2 No. 950-95. Safety of information technology
equipment (Canada)
UL 1950 Third Edition (USA)
EN 60 950 Second Edition (EU)
IEC 60 950 Second Edition with in-country deviations (Pacific Rim)
IEC 60 950 Second Edition with in-country deviations (Caribbean
and Latin America)
AS/NZ 3260 (Australia and New Zealand)
Emissions:
FCC Part 15, Subpart B, Sections 15.107b & 15.109b for Class A
Information Technology Equipment (USA)
EN 55022:1944 (C.I.S.P.R. 22, 1993) for Class A Information
Technology Equipment (EU)
Immunity:
EN 55024:1998 Information Technology Equipment (EU)

221

Advanced
Connectivity

iPatch System Manager Software

Advanced
Connectivity

The iPatch System Manager software allows network administrators

to manage voice and data patch connections from a remote location
using a personal computer. Through a point-and-click graphical user
interface, the network administrator schedules work orders for moves,
adds and changes, tracks their fulfillment, and receives alerts when
unauthorized patching changes are made.
The iPatch System Manager database provides a connectivity map
of the voice and data network, including network equipment, patch
panels, faceplates, devices connected to the faceplates jacks, and
the people using such devices. The network administrator at the PC
and the technician in the telecommunications equipment room can
view the connectivity map at any time. They can use this map to
trace the complete connectivity path all the way from the
service-providing equipment to a persons workstation.
iPatch System Manager Version 4.0 provides greater vision and control over the entire communication network. It adds links to
Network Management Systems (NMS) such as HP OpenView, that allow Network Managers to receive alarms from the iPatch
System, to query iPatch System Manager to view CAD floor plans showing the location of network equipment, and to obtain
physical-layer circuit traces. iPatch System Manager uses the industry standard SNMP to report alarms to the customers NMS,
ensuring that these alarms will appear in the NMS standard alarm browser window. iPatch System Manager allows customers to
specify on a per-circuit basis whether or not SNMP alarms will be generated when a cabling change occurs, thus ensuring that
IT Managers receive alarms only for those circuits that they have deemed critically important. In addition, Version 4.0 supports 3
additional languages on the Rack Manager Plus displayGerman, Spanish and Frenchwith additional languages scheduled for
later release.
iPatch System Manager Version 4.0 includes the critical features of automatically discovering IP devices connected to a managed
switch, adding security features to control switches, and vastly improving the iPatch interconnect feature. The System Manager
software will be able to determine the configuration of the managed network switches (*) populate that information into the
database. It also allows for discovery of the IP devices that are connected to switch ports. The discovered devices will be placed in
the database with respect to its physical location within the network and can be shown on a floor plan drawing.
(*)Please contact your local SYSTIMAX Solutions representative or BusinessPartner for the list of supported hardware.

222

Requirements for Running iPatch System Manager

To run System Manager, the following equipment configuration is recommended:
personal computers (PCs) equipped with:
- Pentium 1.6 GHz or higher speed processor
- for the server PC, at least 512 MB of RAM; for each client PC, at least 256 MB of RAM
- for the server PC, at least 1 GB of free hard disk space; for each client PC, at least 200 MB
of free hard disk space
- a network card and a LAN connection
- for the server PC, a CD-ROM drive
- one of the following Microsoft Windows operating systems
Windows 98, Windows 2000, Windows NT Workstation or Server 4.0 or later, Windows XP

Advanced
Connectivity

Note: Windows 2000 Server or Windows XP is recommended for the server PC. Windows
2000 or Windows XP is recommended for client PCs.
Note: When installing System Manager Software, the setup program automatically installs
Microsoft Data Engine (MSDE) unless the server is already running Microsoft SQL Server 7.0
or a later version. For large sites, running SQL Server 8.0 or a later version on the server is
recommended. Install SQL Server on the server PC before installing System Manager.

for each PC, a color 17 inch or larger monitor

Note: The recommended display settings are:

Colors: High Color (16 bit)
Screen Area: at least 1024 by 768 pixels.
Note: The minimum display settings are:
Colors: 256 Colors
Screen Area: 800 by 600 pixels.

for each PC, a mouse or other pointing device

a printer
The use of a backup (uninterruptible) power supply for the server PC is strongly recommended.
A backup power supply prevents power failures from interrupting communications between System
Manager and the iPatch equipment.
For improved performance of the server PC, a PC with a second processor and 1 GB of RAM is
recommended.

Product Number

Detailed Description

Material ID

iPRCKMGR-PLUS

iPatch Rack Manager Plus

760024588

iP1100GS24

iPatch 1100GS3 24-Port Panel

700213028

iP1100GS48

iPatch 1100GS3 48-Port Panel

700213036

iPF600A12MS

iPatch 600A 12-Port MM SC-SC

760005595

iPF600B12MS

iPatch 600B 12-Port MM SC-SC

760005629

iPF600A12SS

iPatch 600A 12-Port SM SC-SC

760010777

iPF600B12SS

iPatch 600B 12-Port SM SC-SC

760010785

iPF600A24LC

iPatch 600A 24-Port LC

760017848

iPF600B24LC

iPatch 600B 24-Port LC

760017855

iPSYSMGR2V40

iPatch System Mgr. 2 User V4.0 Std. Pkg.

760036368

iPSYSMGRA2V40

iPatch System Mgr. 2 User V4.0 Adv. Pkg. (Device Discovery)

760033795

iPSYSMGRUP5V40

iPatch System Mgr. 25 User Upgrade V4.0

760033803

iPSYSMGRUP5V40

iPatch System Mgr. 5 User Upgrade V4.0

760033811

iPSYSMGRUPBAV40

iPatch System Mgr. Upgrade V4.0 Std. to Adv. (Device Discovery)

760036871

223

SYSTIMAX AirSPEED
AP542 Access Points

Advanced
Connectivity

The SYSTIMAX AirSPEED AP542 access point (AP) is a high

performance 802.11 wireless AP with robust features and
security for demanding enterprise networks. With an
intuitive and simple design, the SYSTIMAX AirSPEED AP542
is simple to install, configure and manage. The SYSTIMAX
AirSPEED AP542 provides the reliability and quality
expected by enterprise IT managers.

SYSTIMAX Solutions Meets the

Performance Demands of the Enterprise
The SYSTIMAX AirSPEED AP542 access point offers a feature-rich, standards-based wireless LAN solution consistent
with the product quality and performance that is synonymous with SYSTIMAX Structured Connectivity Solutions.
40 Mb/s throughput with concurrent 802.11g and 802.11a operation
WMM and 802.11e ready for the quality of service (QoS) required for wireless voice and video
Twice the memory of AP's currently in the market allowing for remote software upgrade capacity
Multiple external antenna connectors to provide enhanced RF signals where coverage is critical

Industry-Leading WLAN Security Features

Reducing the risk of security breaches and unauthorized, rogue connections to your network, the SYSTIMAX AirSPEED AP542
security features enable long-term enterprise security, giving enterprises peace of mind.
802.11i, including the government approved Advanced Encryption Standard (AES)the latest in encryption technology
Advanced security protocols support WPA2 including IEEE 802.1x user authentication and dynamic per-user, per-session
rotating keys
Up to 16 separate VLANs per radio each able to support multiple security settings
Secure management interfacesSNMPv3, SSL and SSHprotect against unauthorized AP changes
Intelligent rogue AP and client, detection and notification

Easy to Install, Configure and Manage

The SYSTIMAX AirSPEED AP542 was designed to simplify installation and integration within the cabling and network infrastructure.
The SYSTIMAX AirSPEED AP542 provides features that decrease the time the enterprise network manager spends on the
installation and management of the wireless LAN solution.
Unique SYSTIMAX Solutions cable management design to provide a clean look and quick installation
Universal mounting bracket to deploy in the ceiling, on the ceiling or on the wall
Support for PoE 802.3af technologybringing power to the AP through the Ethernet cable
Automatic channel selection to ease WLAN configuration
Multiple interface options for remote AP management

Exceptional Quality Assurance and Reliability

The SYSTIMAX AirSPEED AP542 access point is backed by SYSTIMAX Labs to ensure that
enterprises receive the excellence and reliability their mission critical systems demand.
Plenum-rated for safe installation in ventilation spaces
Auto-reconfiguration of network settings and security policies in the event of power outage
Dual image support confirms new AP configuration is valid before deleting current image

Compatibility with All Things Wi-Fi

The SYSTIMAX AirSPEED AP542 access point, automatically supports client devices that adhere to
the 802.11 standard and is upgradeable to support future wireless LAN technology.
Dual-band, tri-mode concurrent support of the 802.11b, 802.11g and 802.11a
Wi-Fi Certified, ensuring interoperability between wireless certified devices
Scalable platform protects network investment
Remote software upgrades to support new 802.11 standards

224

Specifications:
Interface: Wired Ethernet: 10/100BASE-T Ethernet (RJ-45)
RS-232: Unit Configuration
Hardware: Memory: 32 MB SDRAM; 8 MB Flash
Dimensions: 7.7 x 6.7 x 1.1 in (19.6 x 16.4 x 2.8 cm)
Weight: 0.8 lbs (0.36 kg)
Temperature: Operating: 32F to 131F (0C to 55C)
Storage: 14F to 158F (-10C to 70C)
Humidity: 95% (non-condensing)
Power Supply: Integrated Module
Autosensing 100/240 VAC; 50/60 Hz
IEEE 802.3af for Power over Ethernet (PoE)
LEDs: Power
Ethernet LAN Activity
Wireless 802.11a Activity or Wireless 802.11b/g Activity

Management:
Remote Interfaces:
SNMPv1, SNMPv2c and secure SNMPv3 management, Telnet, TFTP
AP542 MIB, Etherlike MIB, 802.11 MIB, Bridge MIB, MIB-II
Standard & AP542 traps
Serial Port CLI (no proxy required)
HTTPS (SSL) server for secure web-based management
Advanced filtering capabilities including:
-IEEE 802.1d bridging with static MAC address filtering
-Network protocol filtering
-Proxy ARP, multicast/broadcast storm threshold filtering
-TCP/UDP port filtering
-Intra-cell traffic filtering
-Spanning Tree support

Product Number

Detailed Description

Application Notes

Material ID

SYSTIMAX AirSPEED AP542 US 9

Dual-radio, Tri-mode 802.11 a & b/g, 9 Channels

US & Canada

760028431

SYSTIMAX AirSPEED AP542 US13

Dual-radio, Tri-mode 802.11 a & b/g, 13 Channels

US & Canada

760028449

SYSTIMAX AirSPEED AP542 EU 4

Dual-radio, Tri-mode 802.11 a & b/g, 4 Channels

Most European Union Countries

760028456

SYSTIMAX AirSPEED AP542 EU 8

Dual-radio, Tri-mode 802.11 a & b/g, 8 Channels

Finland, Germany, Netherlands

760028472

SYSTIMAX AirSPEED AP542 UK

Dual-radio, Tri-mode 802.11 a & b/g

United Kingdom

760028464

SYSTIMAX AirSPEED AP542 MX 9

Dual-radio, Tri-mode 802.11 a & b/g, 9 Channels

Mexico

760031732

SYSTIMAX AirSPEED AP542 MX13

Dual-radio, Tri-mode 802.11 a & b/g, 13 Channels

Mexico

760031740

SYSTIMAX AirSPEED AP542 BR

Dual-radio, Tri-mode 802.11 a & b/g

Brazil

760031336

SYSTIMAX AirSPEED AP542 AR

Dual-radio, Tri-mode 802.11 a & b/g

Argentina

760031906

SYSTIMAX AirSPEED AP542 SA

Dual-radio, Tri-mode 802.11 a & b/g

Saudi Arabia

760031898

SYSTIMAX AirSPEED AP542 JP

Dual-radio, Tri-mode 802.11 a & b/g

Japan

760028480

SYSTIMAX AirSPEED AP542 CHN

Dual-radio, Tri-mode 802.11 a & b/g

China

760028506

SYSTIMAX AirSPEED AP542 SK

Dual-radio, Tri-mode 802.11 a & b/g

South Korea

760028514

SYSTIMAX AirSPEED AP542 HK

Dual-radio, Tri-mode 802.11 a & b/g

Hong Kong

760031724

SYSTIMAX AirSPEED AP542 TW

Dual-radio, Tri-mode 802.11 a & b/g

Taiwan

760028522

SYSTIMAX AirSPEED AP542 SG

Dual-radio, Tri-mode 802.11 a & b/g

Singapore

760028498

SYSTIMAX AirSPEED AP542 AU 9

Dual-radio, Tri-mode 802.11 a & b/g, 9 Channels

Australia, New Zealand

760033993

SYSTIMAX AirSPEED AP542 AU13

Dual-radio, Tri-mode 802.11 a & b/g, 13 Channels

Australia, New Zealand

760028423

225

Advanced
Connectivity

SYSTIMAX AirSPEED
AP541 Access Points

Advanced
Connectivity

The SYSTIMAX AirSPEED AP541 access point (AP) is a cost

effective 802.11 wireless AP delivering enterprise-class
security and management features for installations in
environments that do not require a high degree of client
diversity. With an intuitive and simple design, the SYSTIMAX
AirSPEED AP541 is simple to install, configure and manage.
The SYSTIMAX AirSPEED AP541 provides the reliability and
quality expected by enterprise IT managers.

SYSTIMAX Solutions Meets the Performance

Demands of the Enterprise
The SYSTIMAX AirSPEED AP541 access point offers a cost-effective, feature-rich, standards-based
wireless LAN solution consistent with the product quality and performance that is synonymous with SYSTIMAX Structured
Connectivity Solutions.
24 Mb/s actual throughput in standard 802.11 modes
Twice the memory of APs currently in the market allowing for remote software upgrade capacity
Two internal antennas and two external antenna connectors for antenna diversity and to provide enhanced RF signals
where coverage is critical

Industry-Leading WLAN Security Features

Reducing the risk of security breaches the SYSTIMAX AirSPEED AP541 access point security features enable long-term enterprise
security, giving enterprises peace of mind.
802.11i, including the government approved Advanced Encryption Standard (AES)the latest in encryption technology
Advanced security protocols support WPA2 including IEEE 802.1x user authentication and dynamic per-user, per-session
rotating keys
Up to 16 separate VLANs each able to support a different security setting
Secure management interfaces, SNMPv3, SSL and SSH protect against unauthorized AP changes

Easy to Install, Configure & Manage

The SYSTIMAX AirSPEED AP541 was designed to simplify installation and integration within the cabling
and network infrastructure. The SYSTIMAX AirSPEED AP541 provides features that decrease the time the
enterprise network manager spends on the installation and management of the wireless LAN solution.
Unique SYSTMAX Solutions cable management design to provide a clean look and quick installation
Universal mounting bracket to deploy in the ceiling, on the ceiling or on the wall
Support for PoE 802.3af technologybringing power to the AP through the Ethernet cable
Automatic channel selection to ease WLAN configuration
Multiple interface options for remote AP management

Exceptional Quality Assurance and Reliability

The SYSTIMAX AirSPEED AP541 access point is backed by SYSTIMAX Labs to ensure enterprises receive the excellence and
reliability their systems demand.
Plenum-rated for safe installation in ventilation spaces
Auto-reconfiguration of network settings and security policies in the event of a power outage
Dual image support confirms new AP configuration is valid before deleting current image

Compatibility with All Things Wi-Fi

The SYSTIMAX AirSPEED AP541 access point supports client devices that adhere to the 802.11 standard and is upgradeable to
support future wireless LAN technology.
User defined mode of operation supporting 802.11a or 802.11b/g clients
Wi-Fi Certified, ensuring interoperability between wireless certified devices
Scalable platform protects network investment
Remote software upgrades to support new 802.11 standards

226

Specifications:
Interface: Wired Ethernet: 10/100BASE-T Ethernet (RJ-45)
RS-232: Unit Configuration
Hardware: Memory: 32 MB SDRAM; 8 MB Flash
Dimensions: 7.7 x 6.7 x 1.1 in (19.6 x 16.4 x 2.8 cm)
Weight: 0.8 lbs (0.36 kg)
Temperature: Operating: 32F to 131F (0C to 55C)
Storage: 14F to 158F (-10C to 70C)
Humidity: 95% (non-condensing)
Power Supply: Integrated Module
Autosensing 100/240 VAC; 50/60 Hz
IEEE 802.3af for Power over Ethernet (PoE)
LEDs: Power
Ethernet LAN Activity
Wireless 802.11a Activity or Wireless 802.11b/g Activity

Product Number

Management:
Remote Interfaces:
SNMPv1, SNMPv2c and secure SNMPv3 management, Telnet, TFTP
AP542 MIB, Etherlike MIB, 802.11 MIB, Bridge MIB, MIB-II
Standard & AP542 traps
Serial Port CLI (no proxy required)
HTTPS (SSL) server for secure web-based management
Telnet (SSH)
Advanced filtering capabilities including:
-IEEE 802.1d bridging with static MAC address filtering
-Network protocol filtering
-Proxy ARP, multicast/broadcast storm threshold filtering
-TCP/UDP port filtering
-Intra-cell traffic filtering
-Spanning Tree support

Detailed Description

Application Notes

Material ID

SYSTIMAX AirSPEED AP541 US 9

Single Radio, 802.11 a or b/g, 9 Channels

US & Canada

760028548

SYSTIMAX AirSPEED AP541 US13

Single Radio, 802.11 a or b/g, 13 Channels

US & Canada

760028555

SYSTIMAX AirSPEED AP541 EU 4

Single Radio, 802.11 a or b/g, 4 Channels

Most European Union Countries

760028563

SYSTIMAX AirSPEED AP541 EU 8

Single Radio, 802.11 a or b/g, 8 Channels

Finland, Germany, Netherlands

760028589

SYSTIMAX AirSPEED AP541 UK

Single Radio, 802.11 a or b/g

United Kingdom

760028571

SYSTIMAX AirSPEED AP541 MX 9

Single Radio, 802.11 a or b/g, 9 Channels

Mexico

760031765

SYSTIMAX AirSPEED AP541 MX13

Single Radio, 802.11 a or b/g, 13 Channels

Mexico

760031773

SYSTIMAX AirSPEED AP541 AR

Single Radio, 802.11 a or b/g

Argentina

760031930

SYSTIMAX AirSPEED AP541 BR

Single Radio, 802.11 a or b/g

Brazil

760031344

SYSTIMAX AirSPEED AP541 CN

Single Radio, 802.11 a or b/g

China

760028613

SYSTIMAX AirSPEED AP541 HK

Single Radio, 802.11 a or b/g

Hong Kong

760031757

SYSTIMAX AirSPEED AP541 TW

Single Radio, 802.11 a or b/g

Taiwan

760028670

SYSTIMAX AirSPEED AP541 JP

Single Radio, 802.11 a or b/g

Japan

760028597

SYSTIMAX AirSPEED AP541 IN

Single Radio, 802.11 a or b/g

India

760028696

SYSTIMAX AirSPEED AP541 SK

Single Radio, 802.11 a or b/g

South Korea

760028662

SYSTIMAX AirSPEED AP541 SG

Single Radio, 802.11 a or b/g

Singapore

760028605

SYSTIMAX AirSPEED AP541 UAE

Single Radio, 802.11 a or b/g

United Arab Emirates

760031914

SYSTIMAX AirSPEED AP541 SA

Single Radio, 802.11 a or b/g

Saudi Arabia

760031922

SYSTIMAX AirSPEED AP541 AU 9

Single Radio, 802.11 a or b/g, 9 Channels

Australia, New Zealand

760034009

SYSTIMAX AirSPEED AP541 AU13

Single Radio, 802.11 a or b/g, 13 Channels

Australia, New Zealand

760028530

227

Advanced
Connectivity

SYSTIMAX
AirSPEED Signal
Enhancing Antennas

Advanced
Connectivity

The SYSTIMAX AirSPEED Dual Band Signal Enhancing Antenna (SEA) is an

omni-directional external antenna that enhances the performance of the
wireless network. The Dual Band SEA simultaneously supports 802.11a
and 802.11b/g clients for greater deployment flexibility and infrastructure
investment protection.
The SYSTIMAX AirSPEED SEA represents a key component of the SYSTIMAX
AirSPEED Wireless LAN Solution. Combining the SYSTIMAX AirSPEED AP542,
dual-radio, access point with SEAs creates a powerful solution to meet
enterprise wireless LAN requirements.

Enhances the Wireless Network Performance

Ensures a clear signal for SYSTIMAX AirSPEED Access Points installed in
the ceiling (or plenum) and other RF unfriendly environments*
Omni-directional antenna delivers 360 coverage
Install access points and move the antenna around to optimize placement

Simple to Install
Universal mounting bracket to deploy on the ceiling or on the wall
Built-in magnet provides for a quick and sturdy installation on a dropped or T-bar ceiling
Support for all 802.11 clients

Protects Infrastructure Investment

Compatible with 802.11a and 802.11b/g clients
Allows APs to be installed in the ceiling to prevent theft and tampering without impeding wireless LAN coverage
*Note: The SYSTIMAX AirSPEED Dual Band Signal Enhancing Antenna is not plenum-rated and should not be installed in the ceiling (or plenum).
The antenna cable is plenum-rated and is safe for installation in the ceiling (or plenum).

Specifications:
Dimensions: 3.0 x 2.3 x 7.6 in (7.6 x 5.8 x 19.4 cm)
Weight: 3.9 oz (110 g)
Frequency Range: 2400 MHz-2500 MHz
5150 MHz-5875 MHz
Peak Gain (including cable loss): 2.5 dBi for 2400 MHz-2500 MHz
3.5 dBi for 5150 MHz-5875 MHz
Polarization: Linear, vertical
Power Handling: 2 W (cw)
Impedance: 50 Ohms

Connector: Proprietary
Cable: ULA100PL: 1.5 m
Plenum-Rated
Cable Loss: 2.0 dB for 2400 MHz-2500 MHz
3.5 dB for 5150 MHz-5875 MHz
Temperature: Operating 14F to 131F (-10C to 55C)
Humidity: Operating 95% @ 77F (25C)
Random Material: ABS + PC
Color: White

Product Number

Detailed Description

Material ID

AirSPEED Dual Band SEA

Dual-band Omni Directional Antenna

760033217

228

Wavelink Management Software

Centralized management allows IT to remotely configure, secure, update and monitor large numbers of access points and mobile
devices. Automated maintenance allows customers to take the costs out of ongoing support -- configurations stay in place, are
easily modified, and devices are supported in the field. Increased security enables policies to easily be set and modified across
large numbers of mobile devices and access points, in addition to rogue client and AP detection.
Wavelink WLAN Management is a perfect complement to SYSTIMAX leading edge portfolio of wireless products, which include
enterprise-class access points, signal enhancing antennas, and rack-mounted Power over Ethernet devices.
Wavelink Mobile Manager is the flagship WLAN management software in the market that provides Wi-Fi access point
configuration, management, monitoring, reporting, maintenance and troubleshooting from a centralized location.
Wavelink Avalanche is the mobile device management software platform that provides the ability to manage, configure,
and upgrade mobile devices from a centralized location.
Product Number

Detailed Description

Material ID

W-MMSTDF-025

WL MM (25 APs)

760040501

W-MMSTMF-025

WL MM Maintenance (25 APs)

760040519

W-MMSTDF-001

WL MM AP License (1 AP)

760040527

W-MMSTMF-001

WL MM AP License Maintenance (1 AP)

760040535

W-MMSTDU-025

WL MM Upgrade (25 APs)

760040543

W-MMSTDU-001

WL MM AP License Upgrade (1 AP)

760040550

W-MMSBDF-010

WL MM Small Business (10 APs)

760040568

W-MMSBMF-010

WL MM Small Business Maintenance (10 APs)

760040576

W-MMSBDF-001

WL MM SMB AP License (1 AP)

760040584

W-MMSBMF-001

WL MM SMB AP License Maintenance (1 AP)

760040592

W-MMEDDF-500

WL MM Education (500 APs)

760040600

W-MMEDMF-500

WL MM Education Maintenance (500 APs)

760040618

W-MMEDDF-001

WL MM Ed AP License (1 AP)

760040626

W-MMEDMF-001

WL MM Ed AP License Maintenance (1 AP)

760040634

W-AVSTDF-025

WL Avalanche (25 Dev)

760040683

W-AVSTMF-025

WL AV Maintenance (25 Devices)

760040691

W-AVSTDF-001

WL AV Device License (1 Device)

760040709

W-AVSTMF-001

WL AV Device License Maintenance (1 Device)

760040717

W-AVSTDU-025

WL AV Upgrade (25 Devices)

760040808

W-AVSTDU-001

WL AV Device License Maintenance (1 Device)

760040816

W-MMEPDF-025

WL MM Enterprise (25 AP & 25 Device)

760040444

W-MMEPMF-025

WL MM Enterprise Main 25 AP & 25 Device

760040451

W-MMEPDF-001

WL MM Enterprise AP License (1 AP)

760040469

W-MMEPMF-001

WL MM Enterprise AP License Maintenance (1 AP)

760040477

W-AVEPDF-001

WL AV Enterprise MD License (1 Device)

760040485

W-AVEPDF-001

WL AV Enterprise MD License Maintenance (1 Device)

760040493

W-OPSTDF-001

WL MM HP OpenView

760040642

W-OPSTMF-001

WL MM HP OpenView Maint

760040659

W-OPSTDU-001

WL MM HP OpenView Upgrade

760040667

W-OPSTMU-001

WL MM HP OpenView Upgrade Maintenance

760040675

229

Advanced
Connectivity

PoE NonManaged
Devices

Advanced
Connectivity

SYSTIMAX midspan Power over Ethernet

(PoE) devices offer an effective method
for powering enterprise applications by
eliminating the need for costly electrical
wiring and providing maximum installation
flexibility.

Saves Time and Money

Leveraging SYSTIMAX cabling solutions, the midspan PoE devices allows network end-points to receive both data and
power over existing Category 5e or Category 6 cabling
Protects your network investment by offering a lower total cost of ownership than alternative PoE solutions
Installations savings by deploying all your LAN infrastructure at the same time: cabling, wireless and now power

Scalable
Quick, cost-effective expansion of the network as enterprise requirements evolve
Broad range of solutions fit different types of installations6-, 12-, or 24-Port midspan PoE devices
Simultaneous power for up to 24 Ethernet end-points

Simple to Install, Integrate and Manage

Eliminates the need for AC outlets and power cords at locations where network end-points are installed
Automatically detects all PoE-ready devices
Front panel accessible ports with easy to read LED displays
IEEE 802.3af compliancy ensures compatibility with future power over ethernet devices
Mounted within SYSTIMAX racksoccupies minimal space in the telecommunications closet

Continuous, Reliable Performance and Back-up Power

Enhanced power management allows enterprises to designate power levels per port to ensure sufficient power to all
end-point devices
Safe-powering assures safety with advanced line terminal detection
Automatic detection and protection of legacy, non-powered, ethernet end-points
Distributes back up power and ensures uninterrupted operation of business critical systems during power failures when
deployed with an Uninterruptible Power Supply (UPS)

Specifications:

Connectors: RJ-45, EIA 568A and 568B

DB-9, Female (Management)
Dimensions: 1.75 x 17.0 x 11.9 in (4.4 x 43.3 x 30.2 cm)
Weight: 8.8 lbs (4 kg)
Temperature: Operating: 32F to 104F (0C to 40C)
Storage: 4F to 167F (-20C to 75C)
Humidity: Operating: Maximum 90% (non-condensing)
Altitude: Operating: -1,000 to 10,000 ft (-304.8 to 3048 m)
Thermal Rating: 285 BTU
Data Rate: 10/100 Mb/s
LEDs: System Indicator: AC Power (Green/Orange)
User Indicator: Channel Power (Green/Orange)

Management: Local LED Display

Power: Pin Assignment and Polarity: 4/5 (+), 7/8 (-)
Output Power Voltage: -48V
User Port Power: 15.4W maximum Power Management
Aggregate Power: 2400 / 1200 200W; 600 100W
AC Input Voltage: 88 to 264 Vac
AC Frequency: 47 to 63 Hz
AC Input Current: 3.5 A at 110 Vac, 1.8 A at 240 Vac
DC Input Current: 10 A at 48V
Volt Amperes Rating: 0.48 KVA (-48V); 0.30 KVA (110 VAC)
Product Options: 6-, 12-, or 24-Port midspan PoE Device
Configurations

Product Number

Detailed Description

Material ID

PoE 600

6-Port PoE Device

760031567

PoE 1200

12-Port PoE Device

760031575

PoE 2400

24-Port PoE Device

760031583

230

PoE Managed
Devices
SYSTIMAX PoE 2400G is the newest
addition to the SYSTIMAX midspan Power
over Ethernet device family. It offers an
effective method for powering enterprise
applications by eliminating the need for
costly electrical wiring and providing maximum
installation flexibility. The new midspan PoE device supports applications up to 1 Gbps
performance and offers a unique web-based remote management solution giving enterprises more control of their LAN.

Saves Time and Money

Leveraging SYSTIMAX cabling solutions, the PoE 2400G allows network end-points to receive both data and power over
Category 5e or Category 6 cabling
Protects your network investment by offering a lower total cost of ownership than alternative PoE solutions
Installation savings by deploying all your LAN infrastructure at the same time - cabling, network end-point devices, and now
power

Scalable

Quick, cost effective expansion of the network as enterprise requirements evolve

Supports up to 1 Gbps performance for bandwidth intensive applications requiring power at the device
Simultaneous power for up to 24 Ethernet end-points
IEEE 802.3af compliancy ensures compatibility with future Power over Ethernet devices
Automatically detects all PoE-ready devices

Simple to Install, Integrate, and Manage

Eliminates the need for AC outlets and power cords at locations where network end-points are installed
Web-based application for remote management of powered devices - no software installation required
Real time monitoring, notification, and reset capabilities to troubleshoot devices from any PC
Mounted within SYSTIMAX SCS racksoccupies minimal space (1U) in the telecommunications closet

Continuous, Reliable Performance and Back-up Power

Enhanced power management allows enterprises to designate power levels per port to ensure sufficient power to all
end-point devices
Safe-powering assures safety with advanced line terminal detection
Automatic detection and protection of legacy, non-powered, Ethernet end-points
Distributes back up power and ensures uninterrupted operation of business critical systems during power failures when
deployed with an Uninterruptible Power Supply (UPS)

Specifications:
Connectors: RJ-45, EIA 568A and 568B
DB-9, Female (Management)
Dimensions: 1.75 x 17.0 x 11.9 in (4.4 x 43.3 x 30.2 cm)
Weight: 8.8 lbs (4 kg)
Temperature: Operating: 32F to 104F (0C to -40C)
Storage: 4F to 158F (-20C to 70C)
Humidity: Operating: Maximum 90% (non-condensing)
Altitude: Operating: -1,000 to 10,000 ft (-304.8 to 3048 m)
Thermal Rating: 200 BTU
Data Rate: 10/100/1000 Mb/s
LEDs: System Indicator: AC Power (Green/Orange)
User Indicator: Channel Power (Green/Orange)

Management: Local LED Display, Remote Management

Power: Pin Assignment and Polarity: 4/5 (+), 7/8 (-)
Output Power Voltage: -48V
User Port Power: 15.4W maximum Power Management
Aggregate Power: -200W
AC Input Voltage: 90 to 264 Vac
AC Frequency: 47 to 63 Hz
AC Input Current: 4A at 110 Vac, 2A at 220 Vac
Product Options: 24-Port midspan PoE Device with Remote
Management

Product Number

Detailed Description

Material ID

PoE 2400G

24-Port PoE Device with Remote Management

760031591

231

Advanced
Connectivity

Advanced
Connectivity

232

Faceplates and Zone Box Solutions

Faceplates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234
Zone Boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

Faceplates
& Zone
Boxes

233

Flush Mounted
Modular Faceplates
The SYSTIMAX Modular Faceplates are flush mounted
multi-outlet faceplates designed for use with M-Series
Modular Information Outlets.
The LE faceplates offer an aesthetically pleasing faceplate
look with labeling features.

Faceplates
& Zone
Boxes

The L faceplates are flat faceplates that contain slots

that cover the screws to house white labels and covers.
Two labels and covers are included with the faceplate. The faceplate outlet
openings are numbered on both sides for installation and maintenance identification. Optional M20AP Dust Covers/
Blanks may be used to cover any unused outlets or outlet openings.

The following models are available:

The M13L and M13LE are triplex-outlet
(three-hole) faceplates
The M14L and M14LE are quadplex-outlet
(four-hole) faceplates
The M16L and M16LE are sixplex-outlet
(six-hole) faceplates
The M28L is a double gang eightplex-outlet
(eight-hole) faceplate

The M10L and M10LE are single-outlet faceplates

The M10LW is a single-outlet faceplate for use with
wall-mounted telephones with a mounting distance
of 3.280 inches
The M12L and M12LE are duplex-outlet (two-hole)
faceplates with side by side openings
The M12AP is a duplex-outlet (two-hole) faceplate
with vertically aligned openings

Physical Specifications:

Width: MLE Series2.84 in (7.2 cm)

M28L4.61 in (11.7 cm)
All others2.81 in (7.1 cm)
Height: MLE Series4.81 in (12.2 cm)
All others4.56 in (11.6 cm)
Depth: MLE Series0.33 in (0.84 cm)
All others0.29 in (0.7 cm)
Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

LE-Type
Product Number

Detailed Description

Color

Material ID

M10LE-003

Simplex

Black

108332982

M10LE-215

Simplex

Creme

108332990

M10LE-246

Simplex

Ivory

108333006

M10LE-262

Simplex

White

108333014

M10LE-270

Simplex

Gray

108333022

M12LE-003

Duplex

Black

108333030

M12LE-215

Duplex

Creme

108333048

M12LE-246

Duplex

Ivory

108333055

M12LE-262

Duplex

White

108333063

M12LE-270

Duplex

Gray

108333071

M13LE-003

Triplex

Black

108333089

M13LE-215

Triplex

Creme

108333097

M13LE-246

Triplex

Ivory

108333105

M13LE-262

Triplex

White

108333113

234

Product Number

Detailed Description

Color

Material ID

M13LE-270

Triplex

Gray

108333121

M14LE-003

Quadplex

Black

108333139

M14LE-215

Quadplex

Creme

108333147

M14LE-246

Quadplex

Ivory

108333154

M14LE-262

Quadplex

White

108333162

M14LE-270

Quadplex

Gray

108333170

M16LE-003

Sixplex

Black

108333188

M16LE-215

Sixplex

Creme

108333196

M16LE-246

Sixplex

Ivory

108333204

M16LE-262

Sixplex

White

108333212

M16LE-270

Sixplex

Gray

108333220

Material ID

L-Type
Product Number

Detailed Description

Color

M10L-003

Simplex

Black

108258401

M10L-246

Simplex

Electrical Ivory

108258419

M10L-262

Simplex

Electrical White

108258427

M10L-270

Simplex

Electrical Gray

108258435

M10LW-246

Simplex (For wall mounting of telephones)

Electrical Ivory

108258450

M10LW-262

Simplex (For wall mounting of telephones)

Electrical White

108258468

M12L-003

Duplex

Black

108168485

M12L-246

Duplex

Electrical Ivory

108168477

M12L-262

Duplex

Electrical White

108168469

M12L-270

Duplex

Electrical Gray

108168451

M13L-003

Triplex

Black

108168527

M13L-246

Triplex

Electrical Ivory

108168519

M13L-262

Triplex

Electrical White

108168501

M13L-270

Triplex

Electrical Gray

108168493

M14L-003

Quadplex

Black

108168568

M14L-246

Quadplex

Electrical Ivory

108168550

M14L-262

Quadplex

Electrical White

108168543

M14L-270

Quadplex

Electrical Gray

108168535

235

Faceplates
& Zone
Boxes

Faceplates
& Zone
Boxes

Product Number

Detailed Description

Color

Material ID

M16L-003

Sixplex

Black

108168600

M16L-246

Sixplex

Electrical Ivory

108168592

M16L-262

Sixplex

Electrical White

108168584

M16L-270

Sixplex

Electrical Gray

108168576

M28L-003

Eightplex (Double Gang)

Black

108685009

M28L-246

Eightplex (Double Gang)

Electrical Ivory

108685017

M28L-262

Eightplex (Double Gang)

Electrical White

108685025

M28L-270

Eightplex (Double Gang)

Electrical Gray

108685033

Product Number

Detailed Description

Color

Material ID

M12AP-246

Duplex (Vertical Alignment)

Electrical Ivory

107276172

M12AP-262

Duplex (Vertical Alignment)

Electrical White

107276180

L-Type and LE-Type

Faceplate Labels and
Label Covers
Labels are on 8-1/2 x 11 inch sheets of paper that are to be used with a printer. The labels are easy to punch out since the paper is
perforated in the shape of the labels. The label covers are the clear label covers that go on the faceplate.
Product Number

Package

Min. Order Qty.

Material ID

L Covers

100 covers

1 box, 5 pkgs, 500 covers

108492927

LE Covers

100 covers

1 box, 5 pkgs, 500 covers

108492935

L Labels

10 sheets/1,000 labels

1 box, 50 pkgs, 500 sheets

108492943

LE Labels

10 sheets/300 labels

1 box, 50 pkgs, 500 sheets

108492950

236

Flush Mounted
Flexible Faceplate
SYSTIMAX Flexible Faceplate is a front access modular
structure. This faceplate is universal and accommodates all
M-Series jacks for copper and fiber. It is made up of a main
frame and various types of adapters that snap into it. The
design includes separate components: a single gang frame
M13FP, a double gang frame M26FP, and various adapters:
single, dual, blank, S-Video, and 3-Port RCA. All come in four
colors: black, white, ivory and gray.
Faceplates
& Zone
Boxes

RCA and S-Video (SVHS) Adapters for the flexible faceplate

are front access adapters, that will accommodate the flush
mount S-Video Adapter and the 3-Port RCA Adapter. These adapters
will easily snap into the flexible faceplate.
The RCA Adapter uses a 110 IDC (Insulation Displacement Contact) block to directly terminate the 4-pair building wiring.
RCA outlets are used for connecting audio and video appliances to 24 AWG UTP SYSTIMAX wiring.
The S-Video Adapter uses a 110 IDC block to directly terminate to 4-pair building wiring. The S-Video or Super VHS (SVHS) Modular
Adapter provides baseband video connectivity to 24 AWG UTP SYSTIMAX wiring. These outlets provide point-to-point transmission
of analog baseband National Television System Committee (NTSC)/Phase-Alteration Line (PAL)/SECAM S-Video signals.

Physical Specifications:

Height: M13FP & M26FP4.81 in (12.2 cm)

Width: M13FP2.84 in (7.2 cm)
M26FP4.61 in (11.7 cm)
Depth: M13FP0.64 in (1.6 cm)
M26FP0.67 in (1.7 cm)
Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Detailed Description

Color

Material ID

M13FP-003

Single Gang Frame

Black

760010009

M13FP-246

Single Gang Frame

Ivory

760010017

M13FP-262

Single Gang Frame

White

760010025

M13FP-270

Single Gang Frame

Gray

760010033

M26FP-003

Double Gang Frame

Black

760008607

M26FP-246

Double Gang Frame

Ivory

760008615

M26FP-262

Double Gang Frame

White

760008623

M26FP-270

Double Gang Frame

Gray

760008631

M30FP-1RJ45-003

Single Port Adapter

Black

760009423

M30FP-1RJ45-246

Single Port Adapter

Ivory

760009431

M30FP-1RJ45-262

Single Port Adapter

White

760009449

M30FP-1RJ45-270

Single Port Adapter

Gray

760009456

M30FP-2RJ45-003

Double Port Adapter

Black

760008649

M30FP-2RJ45-246

Double Port Adapter

Ivory

760008656

M30FP-2RJ45-262

Double Port Adapter

White

760008664

M30FP-2RJ45-270

Double Port Adapter

Gray

760008672

M30FP-BLANK-003

Blank Adapter

Black

760009464

M30FP-BLANK-246

Blank Adapter

Ivory

760009472

M30FP-BLANK-262

Blank Adapter

White

760009480

M30FP-BLANK-270

Blank Adapter

Gray

760009498

237

Faceplates
& Zone
Boxes

Product Number

Detailed Description

Color

Material ID

M30FP-SVHS-110

Flush Mount S-VHS Adapter

Black

760013094

M30FP-SVHS-110

Flush Mount S-VHS Adapter

Ivory

760013102

M30FP-SVHS-110

Flush Mount S-VHS Adapter

White

760013110

M30FP-SVHS-110

Flush Mount S-VHS Adapter

Gray

760013128

M30FP-3RCA-110

3-Port RCA Adapter

Black

760017541

M30FP-3RCA-110

3-Port RCA Adapter

Ivory

760017558

M30FP-3RCA-110

3-Port RCA Adapter

White

760017566

M30FP-3RCA-110

3-Port RCA Adapter

Gray

760017574

M30FP-VGA-PT-262

M30FP VGA Adapter

White

760028720

M30FP-VGA-PT-270

M30FP VGA Adapter

Gray

760028738

M30FP-VGA-PT-003

M30FP VGA Adapter

Black

760028704

M30FP-VGA-PT-246

M30FP VGA Adapter

Ivory

760028712

Flush Mounted
Stainless Steel
Faceplates
These flush mounted stainless steel faceplates in 2-, 3-, 4and 6-port size are designed to be used with the M-Series
modular outlets mounted at a 90 or 45 degree angle. When
mounted at the 90 degree angle, the front of the outlet is
flush with the front of the stainless steel faceplate.
These faceplates include an adapter riveted to the stainless steel that accepts the M-Series outlets. The dimensions are
approximately 2.75 in (7.0 cm) wide by 4.5 in (11.3 cm) high by 0.3 in (0.7 cm) deep fitting a NEMA box as small as 1.75 in (4.4 cm)
wide by 4.125 in (10.5 cm) high by 1.75 in (4.4 cm) deep.
Individual packaging includes one faceplate and two combination head (Phillips/slot) mounting screws, for installation in a
standard NEMA electrical box.

Physical Specifications:
Height: 4.50 in (11.4 cm)
Width: 2.75 in (7.0 cm)
Depth: 0.16 in (0.4 cm)

Product Number

Detailed Description

Material ID

M12SP

Duplex

108615188

M13SP

Triplex

108615196

M14SP

Quadplex

108615204

M16SP

Sixplex

108615212

238

Flush Mounted
Multimedia Faceplate
The M10MMFP faceplate provides the opportunity to deploy
copper and fiber media to the workstation for new and
existing installations. The product enables you to fasten a flush
mount faceplate (i.e. M12L, M14L, M12LE, M14LE, etc.) to the
front of the unitfor installation of up to 6 copper M-Series
modules, and provides alternatives for fiber connectors
installed vertically at the base of the product. It may be
configured with ST, SC or LC adapters in various densities.
Adapter plates are provided for use with the SC duplex, LC duplex or the high-density modular adapter strips available for ST, SC
and LC connectors. The plates can be installed either right at the base (exposed) or recessed in unit providing additional
protection for the fibers. Additionally, the fiber adapter strips provide high-density capability for customer applications.
M10MMFP incorporates fiber slack storage to manage fiber termination.
The M10MMFP also features either rear (4) or side (2) entry ports for cabling providing flexibility for either wall-mount or
raceway installs.
The attractive cover snaps onto the base, providing protection for the fiber connections. The cover also provides labeling features
such as a paper label for circuit identification and plastic icon strips (in 9 colors). In addition, the cover may be attached to the
base with the screws, affording tamper resistance.
The M10MMFP Multimedia Faceplate includes: 1 multimedia unit (cover and base); 3 Fiber Adapter Plates- SC Adapter Plate, LC
Adapter Plate and Plate for SC, ST or LC adapter strips; 1-1/4 in truss head screws; K35 by 12 mm pan head Phillips PT screws;
label; clear plastic label cover; installation instructions; plastic icon strips in 9 colors (gray, blue, yellow, orange, red, white,
brown and purple).

Physical Specifications:
Height:
Width:
Depth:
Plastic:

8.76 in (22.2 cm)

4.50 in (11.4 cm)
1.14 in (2.9 cm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Detailed Description

Color

Qty/Pkg

Material ID

M10MMFP-003

Multimedia

Black

108502287

M10MMFP-215

Multimedia

Creme

108502295

M10MMFP-246

Multimedia

Ivory

108502303

M10MMFP-262

Multimedia

White

108502329

M10MMFP-270

Multimedia

Gray

108502337

239

Faceplates
& Zone
Boxes

Flush Mounted
Modular Mounting
Frames
The M105FR1, M106FR2, M108FR3 and M106FR4
Modular Mounting Frames are flush mounted
multi-outlet modular mounting frames designed for
use with the M-Type modular information outlets.
The M105FR1 is a single outlet modular mounting
frame. The M106FR2 is a duplex outlet modular
mounting frame. The M106FR4 is a quadplex outlet
modular mounting frame.
Faceplates
& Zone
Boxes

The M108FR3 is a triplex modular mounting frame. A standard DeCora in style faceplate fits over the frame.

Physical Specifications:

Height: M108FR3: 3.93 in (10.0 cm)

All others: 4.10 in (10.4 cm)
Width: M108FR3: 1.40 in (3.6 cm)
All others: 1.75 in (4.4 cm)
Depth: M108FR3: 0.29 in (0.7 cm)
All others: 0.50 in (1.3 cm)
Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Detailed Description

Color

Material ID

M105FR1-246

Simplex

Electrical Ivory

106622160

M105FR1-262

Simplex

Electrical White

106622178

M105FR1-270

Simplex

Electrical Gray

106688401

M106FR2-003

Duplex

Black

106628852

M106FR2-246

Duplex

Electrical Ivory

106622210

M106FR2-262

Duplex

Electrical White

106622251

M106FR2-270

Duplex

Electrical Gray

106688393

M108FR3-003

Triplex

Black

108265430

M108FR3-246

Triplex

Electrical Ivory

108265448

M108FR3-262

Triplex

Electrical White

108265455

M108FR3-270

Triplex

Electrical Gray

108265463

M106FR4-003

Quadplex

Black

106627763

M106FR4-246

Quadplex

Electrical Ivory

106622277

M106FR4-262

Quadplex

Electrical White

106622285

M106FR4-270

Quadplex

Electrical Gray

106688385

240

4-Port Flush
Mount Outlet
The 4-Port Flush Mount Outlet is designed to
mount on a wall surface, and will fit any standard
National Electrical Manufacturers Association
(NEMA) electrical box. The flush mounted faceplate
has 45 degree angular ports for fiber and copper
connectors and has a protective angled hood.
The hinged base of the faceplate allows changes
and maintenance to occur without reinstalling the
faceplate. The fiber organizer spool bend-radius
provides control and storage for fiber slack.
The 4-Port Flush Mount Outlet can be used in the following environments:
In an ALL COPPER environment the 4-Port Flush Mount Outlet will support up to four M-Series connectors, four M81LC
mounting modules, or up to two M-Series connectors, or M81C mounting modules. When fiber is introduced into the
application the number of ports available for connectors is reduced by one
In an ALL FIBER environment the M14MMO will support two simplex ST or SC connectors, four M81LC connectors, or
two duplex SC connectors
In an integrated FIBER/COPPER environment, the 4-Port Flush Mount Outlet will support one M-Series copper connector
and two simplex SC or ST connectors, or one M-Series copper connector and one duplex SC connector

Physical Specifications:
Height:
Width:
Depth:
Plastic:

5.69 in (14.5 cm)

3.28 in (8.30 cm)
1.29 in (3.3 cm) faceplate, 2.77 in (7.00 cm) hood & faceplate, 5.30 in (13.5 cm) hood/faceplate/spool
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Detailed Description

Color

Material ID

M14MMO-003

Quadplex

Black

107655169

M14MMO-246

Quadplex

Electrical Ivory

107655177

M14MMO-262

Quadplex

Electrical White

107655185

M14MMO-270

Quadplex

Electrical Gray

107655193

241

Faceplates
& Zone
Boxes

4-Port Modular
Furniture Faceplate

Faceplates
& Zone
Boxes

M4CA faceplate is designed for modular furniture applications

requiring either fiber and/or copper connectivity. The M4CA has
M-Series sockets with snap indentations orientated top and
bottom to accommodate up to 4 M-Series jacks. The M4CA
will also accommodate 4 fiber modular telecommunications
outlets such as the LC couplings and jumpers for modular furniture within TIA standard cavity depth of 1.2 inch minimum.
The LazrSPEED angle mount fiber jumper assembly may also be
used with this faceplate.
Modular office furniture manufacturers have used a wide range of panel openings for their data and voice outlets. The M4CA will
adjust to fit many of these. It may be mounted on any flat surface with a material thickness of 0.025 in to 0.125 in (0.63 mm to
3.18 mm). It may be easily installed in any rectangular opening size ranging from 1.7 in high by 2.792 in wide (4.32 cm x 7.09 cm)
to 2.375 in high by 4.125 in wide (6.03 cm x 10.48 cm).
The surface finish is the same as that used on the LE series faceplates. Each M4CA kit includes frame, cover, latch bars (shipped
attached to the frame ) and a paper label that may be used for identification of each port, along with a protective clear plastic
label cover.

Physical Specifications:
Height:
Width:
Depth:
Plastic:

2.98 in (7.6 cm)

4.73 in (12.0 cm)
0.50 in (1.3 cm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Detailed Description

Color

Material ID

M4CA-003

Quadplex

Black

700189046

M4CA-262

Quadplex

White

700191588

M4CA-246

Quadplex

Ivory

700191570

M4CA-270

Quadplex

Grey

700191596

6-Port Modular
Furniture Faceplate
The M26C Modular Furniture Sixplex Outlet Faceplate is a
flush mounted faceplate designed to snap into modular furniture
raceway covers. The M26C holds up to six M-Series or M-81 Series
mounting modules. Both sides of the faceplate are numbered for
easy installation and maintenance identification. The M20AP dust
cover/blank can be used to protect unused outlets and cover
unused faceplate openings. Fits modular furniture knock-out size
1.374 in (3.49 cm) high x 5.251 in (13.34 cm) wide.

Physical Specifications:

Height: M26C1.9 in (4.8 cm)

Width: M26C5.6 in (14.2 cm)
Depth: M26C0.5 in (1.3 cm)
Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Detailed Description

Color

Material ID

M26C-246

Sixplex

Electrical Ivory

107167496

242

3-Port Faceplate for

SteelCase Furniture
The M13C and M13CLS Modular Furniture Triplex Outlet
Faceplates are flush mounted triplex modular faceplates
designed to fit modular furniture raceway covers for the
following SteelCase furniture lines: (E)9000, Segment (with
correct bezel), Answer, Montage, Avenir, Elective Elements,
and Contex. The M13C holds up to three M-Series or fiber
modular telecommunications outlets and has numbering
on both sides of the faceplate for installation and
maintenance identification. The M20AP dust cover/blank
can be used to protect unused outlets and cover unused faceplate openings. The M13C
Faceplate is used in an opening size of 1.38 in (35.1 mm) in height and 2.71 in (68.8 mm) in width (dimensions are +/-.01 in).
The M13CLS Faceplate is part of the LazrSPEED Solution and it holds M-Series modules that snap in horizontally and can also be
angled. The M13CLS Faceplate is used in an opening size of 1.375 in +/- 0.025 in (34.93 mm +/- 0.64 mm) in height and 2.700 in
+/- 0.050 in (68.58 mm +/-1.27 mm) in width.

Physical Specifications:
Height:
Width:
Depth:
Plastic:

1.84 in (4.7 cm)

3.13 in (7.9 cm)
0.29 in (0.7 cm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Detailed Description

Color

Material ID

M13C-003

Triplex

Black

106650864

M13C-246

Triplex

Electrical Ivory

106650880

M13C-262

Triplex

Electrical White

106650898

M13C-270

Triplex

Electrical Gray

106701154

M13CLS-246

Triplex

Ivory

108564675

M13CLS-262

Triplex

White

108564683

M13CLS-270

Triplex

Gray

108564691

M13CLS-003

Triplex

Black

108564709

M13CLS-215

Triplex

Misty Creme

108564725

243

Faceplates
& Zone
Boxes

3-Port Faceplate
for Herman Miller
Action Furniture
The M13HM faceplate is designed to fit to the data
communications opening in the Herman Miller Action Office
System series of modular furniture.
The M13HM has M-Series sockets with snap indentations
to accommodate three M-Series jacks. Above the M-Series
openings is space for a paper label insert with a clear plastic
label holder (included).
Faceplates
& Zone
Boxes

Mounting clips are molded within the M13HM faceplate. No screws required for
mounting and securing the faceplate to the opening.
1 Kit of Parts = 25 M13HM Faceplates with label inserts and label holders.
Minimum Order Quantity (MOQ) = 1 Kit of Parts

Physical Specifications:
Height: 2.13 in (5.5 cm)
Width: 3.5 in (8.8 cm)
Depth: 0.25 in (0.65 cm)

Product Number

Detailed Description

Color

Material ID

M13HM-003

Triplex Faceplate Kit of Parts

Black

760045039

M13HM-246

Triplex Faceplate Kit of Parts

Ivory

760045047

M13HM-262

Triplex Faceplate Kit of Parts

White

760045054

M13HM-270

Triplex Faceplate Kit of Parts

Gray

760045062

244

4-Port Faceplate for

Knoll, SteelCase and
Herman-Miller
The M14 Modular Furniture Quadplex Outlet Faceplates hold up to
four M-Series modular outlets or M81-Series Mounting Modules.
Both sides of the faceplate are numbered for easy installation and
maintenance identification.
The M14C Faceplate is a flush mounted modular faceplate
designed to fit the Knoll, Inc. line of modular furniture raceway covers. Packaged with two color coordinated M20AP dust
cover/blanks to cover unused ports. The M14C Faceplate is used in
an opening size of 1.609 inches in height and 3.358 inches in width
(dimensions are +/- .01 inch).

Faceplates
& Zone
Boxes

The M14CE faceplate is designed to fit SteelCase modular furniture

and is used in an opening size of 1.38 in (3.51 cm) in height and
2.71 in (6.88 cm) in width.
The M14CH Faceplate is a flush mounted modular faceplate
designed to fit the Herman-Miller-Ethospace beltline modular furniture raceway covers. The M14CH Faceplate is used in an opening
of 1.750 inches in height and 2.832 inches in width (dimensions
are +/- 0.005 in).

Physical Specifications:

Height: M14C: 2.11 in (5.4 cm)

M14CE: 2.16 in (5.5 cm)
M14CH: 2.0 in (5.1 cm)
Width: M14C: 4.07 in (10.3 cm)
M14CE: 4.07 in (10.3 cm)
M14CH: 3.13 in (7.9 cm)
Depth: M14C: 0.53 in (1.3 cm)
M14CE: 1.27 in (5.5 cm)
M14CH: 0.38 in (1.0 cm)
Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Detailed Description

Color

Material ID

M14C-003

Quadplex

Black

106650849

M14C-270

Quadplex

Gray

107167462

M14C-148

Quadplex

Almond

107167488

M14CE-003

Quadplex

Black

108216151

M14CE-246

Quadplex

Ivory

108216144

M14CE-262

Quadplex

White

108216128

M14CE-270

Quadplex

Gray

108216136

M14CH-003

Quadplex

Black

108406414

M14CH-246

Quadplex

Ivory

108406422

M14CH-262

Quadplex

White

108406430

M14CH-270

Quadplex

Gray

108406448

245

Rectangular
Mounting Collar for
M-Series Outlets
The M30MC Universal Mounting Collar is designed to
flush mount one M-Series modular jack or module into any
flat surface with a rectangular opening of 0.785 in (2 cm) high
by 0.763 in (1.94 cm) wide. It is designed to accommodate
material from 0.03 in (0.06 cm) to 0.1 in (0.3 cm) thick.

Physical Specifications:
Faceplates
& Zone
Boxes

Height:
Width:
Depth:
Plastic:

1.00 in (2.5 cm)

1.03 in (2.6 cm)
0.46 in (1.2 cm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Color

Material ID

M30MC-003

Black

106664154

M30MC-246

Electrical Ivory

106664139

M30MC-262

Electrical White

106664147

M30MC-270

Electrical Gray

106697089

Circular Mounting
Collar for M-Series
Outlets
The M30CC Circular Collar is a plastic circular collar designed
to support the M-Series modules. The M30CC can be used
in furniture such as a desk or cabinet, on a flat wall panel, or
on a flat metal panel. The supporting panel or wall structure
must between 0.04 in. and 0.13 in (0.1 cm and 0.32 cm) in
thickness, inclusively.
The M30CC collar supports a single telecommunications outlet such as the M-Series and can also support the
M81-Series mounting modules.

Physical Specifications:

Outside Diameter: 1.60 in (4.1 cm)

Depth: 0.50 in (1.3 cm)
Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Color

Material ID

M30CC-246

Ivory

106986110

246

Modular
Faceplates and Clips
Germany/Benelux Applications

The range of Benelux/German standard Information Outlets

include the M18930 Surface Outlet, M18932 Flushmount
Centerplate, M02714 Coverplate, and M81 Dustcovers.
The M18930 Outlet is a surface-mounted duplex M-Series
Modular Information Outlet designed for use with two
M-Series high-density modules. The outlet openings have
provision for label identification.
The M18932 Centerplate is a flush mounted Centerplate which is also designed to
accept two M-Series HDMs. The M18932 mounts in a German/Benelux standard electrical box with centerplate mounting
dimensions of 60 mm center to center and with a minimum depth of 32 mm. The outlet openings have provision for label
identification.
The M02714 flush mount coverplate is used with the M18932 centerplate to provide a frame around the mounting screws of
the centerplate.
The M81 are dust covers designed for use with the M18930 and M18932 faceplates. The M81 is used in empty jack openings
which are not populated with high-density modules.

Physical Specifications:

Height: M18930 and M02714 = 8.0 cm

M18932 = 5.0 cm
M81 = 1.8 cm
Width: M18930 = 6.5 cm
M18932 = 5.0 cm
M02714 = 8.0 cm
M81 = 2.6 cm
Depth: M18930 = 3.5 cm
M18932 = 0.73 cm
M02714 = 0.55 cm
M81 = 1.3 cm

Product Number

Detailed Description

Mounting

Color

Material ID

M02714-246

M18932-246 Coverplate

Flush

Ivory

106720212

M18930-246

Duplex

Surface

Ivory

106720196

M18932-246

Duplex

Flush

Ivory

106720204

M02714-262

M18932-262 Coverplate

Flush

White

107052359

M18930-262

Duplex

Surface

White

107052334

M18932-262

Duplex

Flush

White

107052326

M81-246

Blank

Ivory

106837222

M81-262

Blank

White

106837230

247

Faceplates
& Zone
Boxes

Modular Faceplates and

Clips Scandinavian Applications
The MFUGA Scandinavian faceplate is a dual flush mount faceplate which
mounts in a FUGA box (or equivalent) and accepts two high-density modules.
It consists of the cover and baseplate.
The MFUGAS Scandinavian faceplate is a single flush mount faceplate which
mounts in a FUGA box (or equivalent) and accepts one high-density module.
It consists of the cover, baseplate and mounting plate.
Faceplates
& Zone
Boxes

The MTDL80 Universal faceplate is a dual semi-surface mounted faceplate

which can be surface or flush mounted on a standard electrical box (60 mm mounting) and also mounted on any
type of electrical trunking. It accepts two high-density modules. It comes complete (without HDMs) and ready to mount.
The M12D OPUS Faceplate is used in the OPUS, SENSIQ 66x66 and EPUS 66x66 switch and socket outlet system. It should be
mounted together with mounting frames. It is suited for use in Denmark, East and North European markets.
The MCAN faceplate is a dual flush mount faceplate which mounts on a CAN/Clickline electrical box (or equivalent) and accepts
two high-density modules. The MCAN Kit consists of a faceplate and an adapter frame for mounting in a standard IEC (c/c 60 mm)
electric box. The MCAN Adapter Frame provides secure and tidy mounting for the MCAN Faceplate in a standard IEC wall box (c/c
60 mm).

Physical Specifications:

Height: MFUGA = 71 mm
MFUGAS = 45 mm
MTDL80 = 80 mm
M12D- OPUS = 58 mm
MCAN = 85 mm

Width: MFUGA, MFUGAS = 45 mm

MTDL80 = 80 mm
M12D- OPUS = 58 mm
MCAN = 85 mm

Depth: MFUGA, MFUGAS = 8.5 mm

MTDL80 = 36 mm
M12D- OPUS = 12 mm
MCAN = 8.8 mm

Product Number

Detailed Description

Color

Material ID

MFUGA-262

Duplex

White

106790140

MFUGAS-262

Simplex

White

106969066

MCAN-DL-262

Duplex

White

106790165

MTDL-8D-262

Duplex

White

106790132

M12D-262 OPUS

Duplex

White

107818320

Modular Faceplates
and Clips

East and North European Applications

The M12E EPUS Faceplate is used in the SENSIQ 85x85 and EPUS 85x85 switch
and socket outlet systems. It should be mounted in a standard IEC box and
frame. It is suited for use in east and North European markets (Denmark
excluded).

Physical Specifications:
Height: 7.2 cm
Width: 7.2 cm
Depth: 0.9 cm

Product Number

Detailed Description

Color

Material ID

M12E

Duplex

White

107818338

248

Modular Faceplates
and Clips UK Applications
The range of UK Standard Information Outlets consists of the
M12D & M14D Faceplates, and the LF80 & LF00 Clips. The
M12D is a flush mounted, duplex, 2-gang UK/Ireland standard
faceplate designed to accept two LF80 or LF00 clips (or any
combination of the two). The M14D is a flush mounted,
quadplex, 4-gang UK/Ireland standard faceplate designed
to accept four LF80 or LF00 clips (or any combination of the
two). The standard package for each includes the faceplate
plus two mounting screws for installation in a UK standard 35
mm (for Mark V) or 32 mm (for Mark VI) electrical box.
The LF80 Clips (Mark V and Mark VI) fit into the M12D & M14D and accepts one high-density module. The Mark V is equipped
with a spring-loaded shutter to protect the HDM from dust. It can be cabled through the faceplate and fits into minimum 35 mm
depth boxes. There is a provision for port labeling. The Mark VI is angled and has a unique shutter design. It can be cabled through
the faceplate and fits into minimum 32 mm depth boxes.
The LF00 Clip is a blank snap-in clip used in vacant slots of the M12D or M14D faceplate.

Physical Specifications:

Height: Faceplate: 8.50 cm

Clip: 3.8 cm
Width: Faceplate: M12D = 8.5 cm, M14D = 14.6 cm
Clip: 2.5 cm
Depth: Faceplate: 0.90 cm
Mark V and LF00 Clip: 1.4 cm
Mark VI Clip: 2.0 cm

Product Number

Color

Material ID

M12D Faceplate

White

407900471

M14D Faceplate

White

407900463

LF80 Mark V Clip

White

407900422

LF80 Mark VI Clip

White

407901909

LF00 Blank Clip

White

407900448

M12D Back Box 32mm

White

999901701

M14D Back Box 32mm

White

999901703

M12D Back Box 37mm

White

999901706

M14D Back Box 37mm

White

999901704

M12D Back Box 45mm

White

999901702

M14D Back Box 45mm

White

999901705

249

Faceplates
& Zone
Boxes

Modular
Faceplates and Clips
Italian Applications

The LF82 and LF83 Clips each accept one high-density module and
are designed specifically for the Italian market. The LF82 Clip is black in
color while the LF83 is ivory. The LF82 and LF83 Clips fit in a standard
Italian faceplate which can then be mounted onto an Italian standard
electrical box with a minimum depth of 32 mm. There is a provision
for port labeling.

Physical Specifications:
Faceplates
& Zone
Boxes

Height: 4.39 cm
Width: 2.48 cm
Depth: 2.50 cm

Product Number

Color

Material ID

LF82 Clip

Black

106961311

LF83 Clip

Ivory

106961329

FaceplateLiving

White

108086638

FaceplateLiving

Black

108086646

Modular
Faceplates and Clips
French Applications

The M12LG Clip accepts one (M12 Dual Clip accepts two) high-density
module(s) and is equipped with a spring-loaded shutter to protect the HDM
from dust. It is designed specifically for the French market and fits in
the Legrand Mosaic faceplate. The clip (inserted in the faceplate) can be
mounted into a French standard electrical box with a minimum depth of 32
mm. There is a provision for port labeling.

Physical Specifications:
Height: 4.50 cm
Width: 4.50 cm
Depth: 2.50 cm

Product Number

Color

Material ID

M12LG-262

White

107347080

M12-262

White

107991143

250

Modular
Faceplates and Clips
French Applications

The LF81 Clip accepts one high-density module and is equipped with
a spring-loaded shutter to protect the HDM from dust. It is designed
specifically for the French market and fits in a standard 50 mm x 25 mm
molded Legrand faceplate. The clip (while inserted in the faceplate) can
be mounted into a French standard electrical box with a minimum depth
of 32 mm. There is a provision for port labeling.

Physical Specifications:
Height: 5.0 cm
Width: 2.5 cm
Depth: 1.4 cm

Faceplates
& Zone
Boxes

Product Number

Color

Material ID

LF81 Clip

Ivory

108230632

Modular Faceplates
Asia Pacific Applications

The range of Asia Pacific Information Outlets consists of the

M10CF, M12CF and M14CF Faceplates. All faceplates are flush
mounted. The M12 and M14 are available in unshuttered and
shuttered versions.

Product Number

Detailed Description

Material ID

M10CF-262

1-Port Faceplate Unshuttered, with Cover

760011593

M12CFNS-262

2-Port Faceplate Unshuttered, with Cover

760031518

M14CF-262

4-Port Faceplate Unshuttered, with Cover

760011916

M12CF-262

2-Port Faceplate Shuttered

760003038

M14CF/S-262

4-Port Faceplate Shuttered

760026203

251

Dust Covers for

M-Series Faceplates
and Outlets
The M20AP Covers are dual-purpose blank Dust Covers designed for
used with the modular outlets and modular faceplate kits (except for
the Shuttered clips and Benelux faceplates).

Faceplates
& Zone
Boxes

When the M20AP is used as a Dust Cover, it is inserted over

the outlet opening and will protect the jack wires from dust.
The M20AP can also be used with modular faceplates as a blank
cover for empty jack openings which are not populated with
modular outlets.
The M21A Dust Covers are for use with the M-Series modular
outlets. The M21A installs over the Jack opening of the M-Series
outlet, leaving the Icon area accessible.
The M20AP is packaged with 100 dust cover/blanks per box. The M21A is packaged 100 to a bag with 5 bags in a box.
The M81 is an M-Series modular blank with rear snap-in and used to fill empty ports in M-Series modular faceplates, surface
mount boxes, or mounting collars.

Physical Specifications:
Height:
Width:
Depth:
Plastic:

0.69 in (1.8 mm)

0.75 in (1.9 mm)
0.20 in (0.05 mm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Color

Material ID

M20AP-003

Black

107065583

M20AP-246

Electrical Ivory

107067860

M20AP-262

Electrical White

107067928

M20AP-270

Electrical Gray

107067951

M20AP-215

Cream

108481003

M21A-003

Black

108066325

M21A-112

Orange

108066333

M21A-123

Yellow

108066341

M21A-226

Green

108066358

M21A-246

Ivory

108066457

M21A-262

White

108066465

M21A-270

Gray

108066473

M21A-317

Red

108066481

M21A-318

Blue

108066499

M21A-361

Violet

108337692

M21A-215

Misty Cream

108480997

M81-246

Ivory

106837222

M81-262

White

106837230

252

Modular Information Outlet ICON Inserts

The M60 and M61 ICONs are small plastic inserts used to depict applications of specific jacks on the M-Series modular
information outlet. The ICONs are packaged 25 in a polybag, and 20 polybags in a box. The M60 ICONS are etched with the
following symbol word:

Telephone - symbol representing a telephone application

Computer - symbol representing a computer application
DATA - word representing a data application
VOICE - word representing a voice application
Blank - has blank space for writing or denoting any application the user may designate or require

Product Number

Detailed Description

Color

Material ID

M60A-003

Telephone ICON

Black

107296386

M60A-112

Telephone ICON

Orange

107296402

M60A-123

Telephone ICON

Yellow

107296394

M60A-226

Telephone ICON

Green

107296410

M60A-246

Telephone ICON

Ivory

107296352

M60A-262

Telephone ICON

White

107296378

M60A-270

Telephone ICON

Gray

107296360

M60A-317

Telephone ICON

Red

107296428

M60A-318

Telephone ICON

Blue

107296436

M60B-003

Blank ICON

Black

107296485

M60B-112

Blank ICON

Orange

107296501

M60B-123

Blank ICON

Yellow

107296493

M60B-226

Blank ICON

Green

107296519

M60B-246

Blank ICON

Ivory

107296451

M60B-262

Blank ICON

White

107296477

M60B-270

Blank ICON

Gray

107296469

M60B-317

Blank ICON

Red

107296527

M60B-318

Blank ICON

Blue

107296444

M60C-112

Computer ICON

Orange

107296584

M60C-123

Computer ICON

Yellow

107296576

M60C-226

Computer ICON

Green

107296592

M60C-246

Computer ICON

Ivory

107296535

M60C-262

Computer ICON

White

107296550

M60C-270

Computer ICON

Gray

107296543

M60C-317

Computer ICON

Red

107296600

M60C-318

Computer ICON

Blue

107296618

M60D-003

DATA ICON

Black

107296659

M60D-112

DATA ICON

Orange

107296675

M60D-123

DATA ICON

Yellow

107296667

M60D-226

DATA ICON

Green

107296683

M60D-246

DATA ICON

Ivory

107296626

M60D-262

DATA ICON

White

107296642

M60D-270

DATA ICON

Gray

107296634

M60D-317

DATA ICON

Red

107296691

M60D-318

DATA ICON

Blue

107296709

253

Faceplates
& Zone
Boxes

Faceplates
& Zone
Boxes

Product Number

Detailed Description

Color

Material ID

M60E-003

VOICE ICON

Black

107296741

M60E-112

VOICE ICON

Orange

107296766

M60E-123

VOICE ICON

Yellow

107296758
107296774

M60E-226

VOICE ICON

Green

M60E-246

VOICE ICON

Ivory

107296717

M60E-262

VOICE ICON

White

107296733

M60E-270

VOICE ICON

Gray

107296725

M60E-317

VOICE ICON

Red

107296782

M60E-318

VOICE ICON

Blue

107296790

M61A-003

ICON for MGS400

Black

108065657

M61A-112

ICON for MGS400

Orange

108065673

M61A-123

ICON for MGS400

Yellow

108065707

M61A-215

ICON for MGS400

Misty Cream

108481011

M61A-226

ICON for MGS400

Green

108065731

M61A-246

ICON for MGS400

Electrical Ivory

108065756

M61A-262

ICON for MGS400

Electrical White

108065780

M61A-270

ICON for MGS400

Electrical Gray

108065806

M61A-317

ICON for MGS400

Red

108065814

M61A-318

ICON for MGS400

Blue

108065822

M61F-003

VOICE ICON Connector

Black

108066234

M61F-112

VOICE ICON Connector

Orange

108066242

M61F-123

VOICE ICON Connector

Yellow

108066259

M61F-226

VOICE ICON Connector

Green

108066267

M61F-246

VOICE ICON Connector

Ivory

108066275

M61F-262

VOICE ICON Connector

White

108066283

M61F-270

VOICE ICON Connector

Gray

108066291

M61F-317

VOICE ICON Connector

Red

108066309

M61F-318

VOICE ICON Connector

Blue

108066317

M61H-003

Computer ICON, MPSE, DATA

Black

108373515

M61H-112

Computer ICON, MPSE, DATA

Orange

108373523

M61H-123

Computer ICON, MPSE, DATA

Yellow

108373531

M61H-215

Computer ICON, MPSE, DATA

Misty Cream

108481029

M61H-226

Computer ICON, MPSE, DATA

Green

108373549

M61H-246

Computer ICON, MPSE, DATA

Ivory

108373564

M61H-262

Computer ICON, MPSE, DATA

White

108373572

M61H-270

Computer ICON, MPSE, DATA

Gray

108373580

M61H-317

Computer ICON, MPSE, DATA

Red

108373598

M61H-318

Computer ICON, MPSE, DATA

Blue

108373606

M61H-361

Computer ICON, MPSE, DATA

Violet

108373614

254

Flexible Surface
Mount Outlet
The M40 Multimedia Information Outlet is a
surface-mounted plastic enclosure designed to support
a copper/fiber intergrated environment, an all copper
environment, or an all fiber environment.
The M40 design makes it versatile by utilizing
removable panel inserts allowing termination of copper, fiber, or
composite cables. Panels are available to hold RJ45, ST, SC, and LC adapters.
The M40 outlet comes equipped with one M40RJ4A and one M40ST8 panel. Other panels must be ordered separately.

Physical Specifications:
Height:
Width:
Depth:
Plastic:

M40A1-B 6.88 in (17.5 cm)

M40A1-B 5.79 in (14.7 cm)
M40A1-B 1.70 in (4.3 cm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Detailed Description

Color

Material ID

M40A1-B-262

Basic Outlet w/ M40RJ4A and M40ST8

Electrical White

107992927

M40ST8-B-262

Insert Panel holds 8 ST Couplings

Electrical White

107239485

M40DSC4-B-262

Insert Panel holds 4 Duplex SC Couplings

Electrical White

107239493

M40R-J2-246

Insert Panel holds 4 RJ45 Jacks

Electrical Ivory

106669278

M40RJ4A-262

Insert Panel holds 4 RJ45 Jacks, 4 M81 Mounting Modules

Electrical White

108004268

M40ST4-262

Insert Panel holds 4 ST Couplings

Electrical White

107800658

255

Faceplates
& Zone
Boxes

24-Port Consolidation
Point Box
The new low profile M224CPN Consolidation Box is introduced as
an enhancement to the zone wiring architecture.

Faceplates
& Zone
Boxes

This product provides a connection and distribution point for data

and telecom cables in installations requiring a consolidation point.
The slim design permits installation in a variety of non-plenum
spaces such as under floors, limited space closets, inside paneled
furniture, on walls in plain view and on shelves. The box can be
mounted, with additional support, to single- or dual-gang electrical type boxes. For best results,
the box is mounted on a flat surface, horizontally or vertically. The new M224CPN is substantially smaller than the M36PA (36-Port
plenum) boxonly 27% of the box volume and 36% of the box area.
The box design utilizes four removable panels that can accommodate a variety of copper and fiber based connectors. Each panel
will hold up to six connectors each. The box has a capacity of 24 dual SC connectors, single SC connectors, dual LC connectors,
STII+ & ST connectors, M-Series type copper connectors, S-Video, RCA, BNC and F-type video connectors, or any combination
thereof. Connector types can be mixed and matched within the box by using two different panels. The box comes equipped
with four 6-port inserts, two blank inserts, 12 dust covers for M-Series outlet holes, closing screws, wire ties, and instructions.
The M-Series panel has the most variety in connector options; it accommodates all but the dual SC connectors. Three fiber optic
splice organizers are available which will accommodate fusion, mechanical or mass fusion splices. The M224CPN consolidation
box is part of the SYSTIMAX SCS family of products.

Features and Benefits:

Easy access for terminations and moves, adds

and changes
Designed for mounting in various non-plenum
environments (i.e., on the floor, under floor tile,
surface-mount, wall, furniture, inside cabinets
Supports cable/port labeling
Equipped with removable cover section for
cord/label access that does not expose horizontal
cables/terminations

Non-metallic housing
24-Port capacity
Accommodates copper M-Series outlets, fiber
connectors and copper and fiber terminations
Can be populated with any M-Series voice, data or video
outlet
Expandable/Stackable features

Physical Specifications:
Height: 12.14 in (30.8 cm)
Width: 8.45 in (21.5 cm)
Depth: 1.44 in (3.7 cm)
Burn Rating: Non plenum

Product Number

Detailed Description

Color

Material ID

M224CPN

Box Base Cover, 4 M-Series Panels, 2 Blank Panels

Black

700016462

M224CPN

Box Base Cover, 4 M-Series Panels, 2 Blank Panels

Ivory

700016470

M224CPN

Box Base Cover, 4 M-Series Panels, 2 Blank Panels

Gray

700016496

M224CPN

Box Base Cover, 4 M-Series Panels, 2 Blank Panels

White

700016488

M224MSP

Panel Kit Includes 4 M-Series Panels of One Color

Black

700016504

M224MSP

Panel Kit Includes 4 M-Series Panels of One Color

Ivory

700016512

M224MSP

Panel Kit Includes 4 M-Series Panels of One Color

White

700016520

M224MSP

Panel Kit Includes 4 M-Series Panels of One Color

Gray

700016538

M224SCP

Panel Kit Includes 4-Dual SC Panels of One Color

Black

700019482

M224SCP

Panel Kit Includes 4-Dual SC Panels of One Color

Ivory

700019490

M224SCP

Panel Kit Includes 4-Dual SC Panels of One Color

White

700019508

M224SCP

Panel Kit Includes 4-Dual SC Panels of One Color

Gray

700019516

M224FOS

Fiber Optic Spool Kit Includes 2 White Spools

White

700016553

256

32-Port Zone
Wiring Box
The 32-Port Zone Wiring Box provides a connection and
distribution point for data and telecom cables in installations requiring a consolidation point. The design includes a 3.35 in X 2.566 in
(85.04 mm X 65.18 mm) rectangular bottom knockout to be used in
conjunction with a standard dual-gang electrical box, in addition to
twelve inch (19.05 mm) knockouts for use with conduit.
The size of the M32CPP/100HCP design will allow
installation in a variety of plenum spaces such as under floors and
above ceilings. The design has 32 positions that accommodate a
variety of M-Series type copper, fiber, and video connectors and an area for a
100-Pair 110 IDC block. The M32CPP/100HCP has one fire foam entrance and four fire foam exit areas for
plenum-rated cable (4-Pair & 25-Pair).

Faceplates
& Zone
Boxes

Physical Specifications:
Height: 13.08 in (33.2 cm)
Width: 14.00 in (35.6 cm)
Depth: 4.25 in (10.8 cm)

Product Number

Detailed Description

Material ID

M32CPP

32-Port Zone Wiring Box

700188931

110C Connecting Block

110C Connecting Block Kit for Plenum Box

760006395

36-Port Zone
Wiring Box
The M36CPP Data/Communication Distribution Box is a zone
wiring box (i.e. consolidation point(CP)) that provides for the
distribution of data and telecommunication signals throughout
the work area environment. The box has 36 positions for
M-Series copper and/or fiber connectors. It is intended to
mount above ceilings or below floors in open office buildings.
The key benefit is that it saves costs in moves, adds and
changes (MACs) when zone cabling is required in a plenum environment.
The Box is UL Listed to meet the stringent plenum requirements. The National Electric Code allows locating this
type of zone box in space used for environmental air.
The M36CPP Distribution Box Assembly comes with: connector bracket, plenum cover, plenum box, foam fence, fiber reel
(optional to use), foam retainer, bushing (optional to use), fire foam, interconnection label, installation instructions, hex nut
(No. 4-40), long pan-head screw (No. 8-32 by 3/38 in [9.5 mm]) and plenum cable tie.

Physical Specifications:
Height: 19.12 in (48.6 cm)
Width: 14.14 in (35.9 cm)
Depth: 1.82 in (4.6 cm)

Product Number

Detailed Description

Material ID

M36CPP DATA

36-Port Zone Wiring Box

108482845

257

48-Port Zone
Wiring Box
The 48-Port Plenum Zone Wiring Box provides a connection
and distribution point for data and telecom cables in
installations requiring a consolidation point. The design
includes a 3.35 in X 2.566 in (85.04 mm X 65.18 mm)
rectangular bottom knockout to be used in conjunction with
a standard dual-gang electrical box, in addition to twelve
0.75 inch (19.05 mm) knockouts for use with conduit.
Faceplates
& Zone
Boxes

The size of the M48CCP design will allow installation in

a variety of plenum spaces such as under floors and above ceilings. The design has 48
positions that accommodate a variety of M-Series type copper, fiber and video connectors. It also has one fire foam entrance and
four fire foam exit areas for plenum-rated cable (4-Pair and 25-Pair).

Features and Benefits:

48-Port capacity
Support copper M-Series outlets, fiber connectors, copper and fiber terminations
Easy access for terminations, moves, adds and changes
Designed for mounting in various plenum and non-plenum environments (floor, under floor, surface mount or wall)
Supports cable/port labeling
Equipped with removable cover section for cord/label access and doesn't expose horizontal cables

Physical Specifications:
Height: 13.08 in (33.2 cm)
Width: 14.00 in (35.6 cm)
Depth: 4.25 in (10.8 cm)

Product Number

Detailed Description

Material ID

M48CPP

48-Port Zone Wiring Box

700188923

258

Surface-Mount
Boxes
Single Port
The M101SMB Modular Surface-Mount Box is
designed for use with one M-Series modular
information outlet (copper or fiber). It can be
mounted on a flat surface using the screws
or the double-sided adhesive tape provided.
This unit will accept 22-26 gauge cable.
Faceplates
& Zone
Boxes

Physical Specifications:
Height:
Width:
Depth:
Plastic:

2.26 in (5.7 cm)

1.22 in (3.1 cm)
1.29 in (3.3 cm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Color

Material ID

M101SMB-B-003

Black

107983983

M101SMB-B-246

Electrical Ivory

107984007

M101SMB-B-262

Electrical White

107984015

M101SMB-B-270

Electrical Gray

107984023

Dual Port
The M102SMB Modular Surface-Mount Box is a modular surface-mounted duplex box designed for use with one or two M-Series
modular information outlets (copper and/or fiber). It can be mounted on a flat surface using the screws or the double-sided
adhesive tape provided. This unit will accept 22-26 gauge cable.

Physical Specifications:
Height:
Width:
Depth:
Plastic:

2.26 in (5.7 cm)

2.06 in (5.2 cm)
1.29 in (3.3 cm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Color

Material ID

M102SMB-B-003

Black

107984031

M102SMB-B-246

Electrical Ivory

107984049

M102SMB-B-262

Electrical White

107984056

M102SMB-B-270

Electrical Gray

107984064

259

4-Port
The M104SMB Modular Surface-Mount Box is a modular multimedia surface-mounted quadplex box designed for use with one
to four M-Series modular jacks (copper and/or fiber). The M104SMB can be mounted on a flat surface using the screws or the
double-sided adhesive tape provided. One mounting magnet kit is required for mounting on steel walls or furniture.

Faceplates
& Zone
Boxes

The outlet openings are numbered on both the base and cover for installation and maintenance identification. The M104SMB is
packaged with three color-coordinated M20AP Dust Covers/Blanks to cover any unused jacks. This unit will accept 22-26 gauge
cable.

Physical Specifications:
Width:
Length:
Depth:
Plastic:

2.83 in (7.2 cm)

3.92 in (10.0 cm)
1.20 in (3.0 cm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Color

Material ID

M104SMB-A-003

Black

107952475

M104SMB-A-246

Electrical Ivory

107952442

M104SMB-A-262

Electrical White

107952459

M104SMB-A-270

Electrical Gray

107952467

6-Port
The M106SMB Modular Surface-Mount Box is a modular multimedia surface-mounted sixplex box designed for use with one
to six M-Series modular jacks (copper and/or fiber). It is used to terminate 25-Pair Category 5 cable at the transition point, or to
terminate four pair wiring in the work location subsystem, or to terminate 4 strands of fiber. The M106SMB can be mounted on
a flat horizontal surface or on a wall using two mounting screws, double-sided sticky tape or magnets. Four magnet pockets are
manufactured within the structure of the M106SMB as holders.
The M106SMB has a storage device/area for storing unterminated copper conductors.

Physical Specifications:
Height:
Width:
Depth:
Plastic:

5.49 in (13.9 cm)

4.81 in (12.2 cm)
1.22 in (3.1 cm)
High-impact, flame retardant, UL-rated 94 V-0, thermoplastic

Product Number

Color

Material ID

M106SMB-003

Black

107431520

M106SMB-246

Electrical Ivory

107431546

M106SMB-262

Electrical White

107431538

M106SMB-270

Electrical Gray

107431553

260

12-Port
The M112SMB Modular Surface-Mount Box is a 12-Port modular multimedia surface-mounted box designed for use with
12 M-Series modular jacks and/or fiber modules. The M112SMB can be mounted on a flat surface using the screws or the
double-sided adhesive tape provided. Four mounting magnets (optional) are required for mounting on steel walls or furniture.
The M112SMB is packaged with six color-coordinated M20AP Dust Cover/Blanks to cover any unused jacks. The outlet openings
are numbered on both the base and cover for installation and maintenance identification.

Physical Specifications:

Faceplates
& Zone
Boxes

Height: 9.13 in (23.2 cm)

Width: 4.81 in (12.2 cm)
Depth: 1.30 in (3.3 cm)
Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic
Mounting: Surface

Product Number

Color

Positions

Material ID
106658164

M112SMB-003

Black

12

M112SMB-246

Electrical Ivory

12

106658149

M112SMB-262

Electrical White

12

106658156

M112SMB-270

Electrical Gray

12

106688419

Accessories
The SMBFG fiber organizer has a small spindle to protect and support the fiber bend radius and two guides to route the fiber to
the connector. It supports up to four fibers in an all-fiber environment in the M106SMB modular surface-mount box and supports
up to six fibers in an all-fiber environment in the M112SMB modular surface-mount box.
The 345A mounting magnet contains two magnets and is used with the M104SMB modular surface-mount box.
The 362PS zone wiring kit labels are used with the M106SMB and M112SMB modular surface-mount boxes.
The D180880 mounting magnet kit contains four magnets and is used with the M106SMB and M112SMB modular surface-mount
boxes.
Product Number

Detailed Description

Material ID
107431512

SMBFG

Fiber Organizer

345A

Mounting Magnet

106928765

362PS

Zone Wiring Kit Labels

108035049

D180880

Mounting Magnet Kit

103184156

261

Faceplates
& Zone
Boxes

262

Equipment Frames and

Cable Management Solutions
Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264
Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271
Cable Runway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280

Frames &
Cable
Management

263

Standard Open Racks

The SYSTIMAX Open Rack System is designed for use in telecommunications and
equipment rooms for storing telecommunication equipment. Backed by the
standard SYSTIMAX SCS 20-Year Warranty, when used with the SYSTIMAX
end-to-end solution.
The additional channel depth on RK130A provides extra room for high-density
equipment and cable needs. 6 in (15.2 cm) deep upright mounting channels for
MDF, IDF and other high capacity distribution frame applications. Ideally suited for
back-to-back VisiPatch installations.

Frames &
Cable
Management

Product
Number

Detailed
Description

Color

Rack Height

Depth

Equipment
Support

Shipping
Weight

Material ID

RK100A

RACK 19 in

Black

45U 84 in (213.4 cm)

3 in (7.6 cm)

750 lbs (340 kg)

32 lbs (14.5 kg)

108527441

RK130A

RACK 19 in

Black

45U 84 in (213.4 cm)

6 in (15.2 cm)

750 lbs (340 kg)

38 lbs (17.2 kg)

108867151

Wall Mount Racks

The SYSTIMAX Wall Mount product family includes the standard fixed wall
mount equipment rack and the hinged swing gate wall rack. The wall mount
equipment rack is designed for applications where floor space for free standing
racks or cabinets is not available. It provides a sturdy platform for wall mounted
equipment.

Product
Number

Detailed
Description

Color

Rack Height

Depth

Equipment
Support

Shipping
Weight

Material ID

RW100A

Fixed Wall Rack,

Black

21U 38.5 in (97.8 cm)

12 in (30.5 cm)

100 lbs (45.4 kg)

11 lbs (5 kg)

108527466

Hinged Swing Gate Black

21U 38.5 in (97.8 cm)

18 in (45.7 cm)

200 lbs (90.7 kg)

26 lbs (11.8 kg) 760034744

Black

11U 24.5 in (62.2 cm)

18 in (45.7 cm)

85 lbs (38.6 kg)

28 lbs (12.7 kg) 760045336

Black

19U 38.5 in (97.8 cm)

18 in (45.7 cm)

85 lbs (38.6 kg)

33 lbs (15 kg)

19 in
RW100AS

Wall Rack, 19 in
RW200AS

Swinging Wall
Rack, 19 in

RW300AS

Swinging Wall
Rack, 19 in

264

760045344

Standard Vertical
Cable Management
The SYSTIMAX Standard Vertical Cabling Management provides a cost-effective,
adaptable vertical cable management system for SYSTIMAX open rack system that
fits your budget.
The single sided section significantly reduces shipping size and cost to provide
maximum value. The double sided unit can be placed back-to-back to align with
growth in your network.

Features and Benefits:

Two-piece design on single sided version reduces the products shipping
size and cost
One RMU interval cable guide fingers for easy and organized pathway for
cables and patch cords. Cable guide fingers are made of durable, flame
retardant (UL 94 V-0) plastic to withstand wear-and-tear and prevent accidental breakage
Includes an aluminum, snap-on, hinged cover to easily hide cable for a professional look. The covers swing on hinges to
open left or right, allowing quick access to the cable from either direction for easy moves, adds and changes. The cover sits
on top of the cable guide fingers to provide additional room for organizing
Includes rounded acorn nuts for attaching the two section pieces together in order to eliminate sharp edges and reduce
the chance of torn cables and injuries
Mounting hardware provided for easy assemble to the rack, square carriage boltsinstead of standard round bolts allowing
tightening of the nuts with just one hand
The GV100SS, 2 in (5.1 cm) Diameter, Management Spool is available that supports both fiber and copper cables for use with
standard vertical cabling managers.
Product
Number

Detailed Description

Color

Rack
Height

Depth

Width

Shipping Weight

Material ID

GV100A

Std Vertical CA Mgr,

Black

7 ft

6.76 in

6 in

19 lbs (8.6 kg)

108527560

(213.4 cm)

(17.2 cm)

(15.2 cm)

7 ft

9.30 in

6 in

22 lbs (10 kg)

760034884

(213.4 cm)

(23.6 cm)

(15.2 cm)

7 ft

13.52 in

6 in

39 lbs (17.7 kg)

760034892

(213.4 cm)

(34.3 cm)

(15.2 cm)

7 ft

6.76 in

10 in

23 lbs (10.4 kg)

760036640

(213.4 cm)

(17.2 cm)

(25.4 cm)

N/A

N/A

N/A

3 lbs (1.4 kg)

760034918

Single Sided
GV100AE

Std Vertical CA Mgr,

Black

Single Sided Ext Capacity

GV100DS

Std Vertical CA Mgr,

Black

Double Sided
GV100B

Std Vertical CA Mgr,

Black

Single Sided
GV100SS

Cable Spools for GV100,

Black

6 Pack

265

Frames &
Cable
Management

Enhanced Vertical
Cable Management
The SYSTIMAX Enhanced Vertical Cabling Management provides an attractive and highly
functional vertical management pathway for organizing, distributing, storing and concealing
communications cable between or adjacent to SYSTIMAX open rack system. Installation is more
attractive and allows for easy moves, adds and changes of connections. The one RMU spacing of
the cable guides align with the rack spacing, which may eliminate the need for horizontal cable
managers. Compliant with ANSI/TIA/EIA installation of Category 5/5e/6 and fiber cables.
This Enhanced Vertical Cabling Management includes rigid aluminum latching covers that hide
and conceal the cable. Each latching cover includes a handle on the outside of the cover for
easy removal and installation. This system also includes an extended capacity option for larger
cable management applications.

Features and Benefits:

Frames &
Cable
Management

Black powder coat,

wrinkle finish to
reduce fingerprints,
scratches and
smudges
Factory assembled
and ready to install out of
the box (Mounting hardware included)
Provides large cable openings that align with each rackmount space on the rack providing by-RMU control of
patch cords
Extra capacity models have longer T-shaped fingers and
larger cable openings that will pass twice as much cable/
patch cords as standard cable managers

Manufactured from a combination of strong, lightweight

5052-H32 aluminum sheet and plenum-rated UL 94
V-O flame resistant composite materials for maximum
strength
Extra-wide, contoured cable guides provide smooth
movement and extra strong support
Edge-protected pass through ports to make it easy to
route cable from front to back
Vertical slots along the center separator for optional
cable ties
Locking latch cover can be easily switched from right to
left opening and can be removed so that cable does not
have to thread through guides
The door locks in the closed position to protect cables
and provides a clean, finished look

SYSTIMAX MC100SS Retrofit Management Spool supports both fiber and copper cables for use with any SYSTIMAX vertical
cabling sections with 2.5 in (6.4 cm) diameter pass-through holes.

Product
Number

Detailed Description

Color

Rack
Height

Depth

Width

Shipping
Weight

Material ID

MC100A

Enhanced Vertical Cable Manager,

Black

7 ft

16.5 in

6 in

45 lbs

108527350

(213.4 cm)

(41.9 cm)

(15.2 cm)

(20.4 kg)

7 ft

16.5 in

10 in

53 lbs

(213.4 cm)

(41.9 cm)

(25.4 cm)

(24 kg)

7 ft

21.23 in

6 in

56 lbs

(213.4 cm)

(53.9 cm)

(15.2 cm)

(25.4 kg)

7 ft

21.23 in

10 in

69 lbs

(213.4 cm)

(53.9 cm)

(25.4 cm)

(31.3 kg)

7 ft

21.23 in

12 in

75 lbs

(213.4 cm)

(53.9 cm)

(30.5 cm)

(34 kg)

N/A

N/A

N/A

5 lbs (2.3 kg)

Locking Latch Covers, Double Sided

MC100B

Enhanced Vertical Cable Manager,

Black

Locking Latch Covers, Double Sided

MC100AE

Enhanced Vertical Cable Manager,

Black

Locking Latch Covers, Extra Capacity

MC100BE

Enhanced Vertical Cable Manager,

Black

Locking Latch Covers, Extra Capacity

MC100CE

Enhanced Vertical Cable Manager,

Black

Locking Latch Covers, Extra Capacity

MC100SS

Retrofit Cable Spool, 7 Pack

Black

266

108527351
760034850
760034868
760034876
760034900

Product
Number

Detailed Description

Color

Rack
Height

Depth

Width

Shipping
Weight

Material ID

MC110AS

Enhanced Vertical Cable Manager, Locking

Black

7 ft

8.1 in

4.4 in

17 lbs

760046961

(213.4 cm)

(20.6 cm)

(11.2 cm)

(7.7 kg)

Black

7 ft

8.1 in

4.4 in

40 lbs

(213.4 cm)

(20.6 cm)

(11.2 cm)

(18.1 kg)

Black

7 ft

8.1 in

6.0 in

20 lbs

(213.4 cm)

(20.6 cm)

(15.2 cm)

(9.1 kg)

Black

7 ft

8.1 in

10.0 in

45 lbs

(213.4 cm)

(20.6 cm)

(25.4 cm)

(20.4 kg)

7 ft

10.6 in

6.0 in

31 lbs

(213.4 cm)

(26.9 cm)

(15.2 cm)

(14.1 kg)

7 ft

10.6 in

10.0 in

40 lbs

(213.4 cm)

(26.9 cm)

(25.4 cm)

(18.1 kg)

7 ft

10.6 in

12.0 in

44 lbs

(213.4 cm)

(26.9 cm)

(30.5 cm)

(20 kg)

Latch Covers, Single Sided, 19 in

MC110C

Enhanced Vertical Cable Manager, Locking

Latch Covers, Double Sided, 19 in

MC110CS

Enhanced Vertical Cable Manager, Locking

Latch Covers, Single Sided, 19 in

MC110BS

Enhanced Vertical Cable Manager, Locking

Latch Covers, Single Sided, 19 in

MC110ASE

Enhanced Vertical Cable Manager, Locking

Black

Latch Covers, Extra Capacity, Single Sided,

760046979
760046664
760046987
760046995

19 in
MC110BSE

Enhanced Vertical Cable Manager, Locking

Black

Latch Covers, Extra Capacity, Single Sided,

760047001

19 in
MC110CSE

Enhanced Vertical Cable Manager, Locking

Latch Covers, Extra Capacity, Single Sided,

Black

19 in

267

760047241

Frames &
Cable
Management

Horizontal Cable
Management
The SYSTIMAX Universal Horizontal Cable Manager and Ring
Panel provide an enhanced horizontal pathway for patch cords
and multimedia applications using coax, copper and fiber optic
cables.

Horizontal Ring Panel

The horizontal ring panel is used to organize horizontal cable

runs. The rack mounted ring panel is big enough to handle
most cable management jobs.

Features and Benefits:

Frames &
Cable
Management

Large 6 in (15.2 cm) wide x 2.8 in (7.1 cm) high heavy-duty aluminum rings
Strong lightweight aluminum construction, black finish
Rounded edges protect cable sheaths and will not bind during installation
Rings are bolted onto panels so they can be added or removed
Pre-assembled with seven equally spaced rings

Horizontal Cable Manager

Extra-wide and contoured cable guides separate and organize patch cords for quick and easy moves, adds and changes (MACs).
Use above or below patch panels or network switches to route patch cords to exact connection points on the rack.

Features and Benefits:

Patch cords may also be routed to the back of the rack through the flanged pass-through slot. After routing the cables or
cords, simply snap-on the hinged cover for a clean, professional appearance
Cable guides are offset 1.3 in (3.3 cm) or 2.6 in (6.6 cm) from the front of the rack to ensure proper bending radii of patch
cables even hooded patch cables
Snap-on cover snaps on at four points
Black powder coat textured finish, reducing fingerprints and smudges
Closed trough-style rack-mount cable managers
T-shaped finger openings at the top and bottom of the trough

Product
Number

Detailed Description

Color

Depth

Shipping
Weight

Material ID

HC120A

Horizontal Ring Manager, 19 in W x 2U

Black

6 in (15.2 cm)

9 lbs (4.08 kg)

108528795

HCM1U

Horizontal Cable Manager, Single Sided, 19 in W x 1U

Black

5.76 in (14.6 cm)

2 lbs (0.91 kg)

760034793

HCM2U

Horizontal Cable Manager, Single Sided, 19 in W x 2U

Black

5.76 in (14.6 cm)

3 lbs (1.36 kg)

760034801

HCM3U

Horizontal Cable Manager, Single Sided, 19 in W x 3U

Black

5.76 in (14.6 cm)

4 lbs (1.81 kg)

760034819

HCM1UD

Horizontal Cable Manager, Single Sided, Deep Panel,

Black

7.24 in (18.4 cm)

3 lbs (0.91 kg)

760034827

Black

7.24 in (18.4 cm)

4 lbs (1.81 kg)

999901661

Black

7.24 in (18.4 cm)

5 lbs (2.27 kg)

999901662

19 in W x 1U
HCM2UD

Horizontal Cable Manager, Single Sided, Deep Panel,

19 in W x 2U

HCM3UD

Horizontal Cable Manager, Single Sided, Deep Panel,

19 in W x 3U

HCM1UDS

Horizontal Cable Manager, Double Sided, 19 in W x 1U

Black

11.7 in (29.7 cm)

5 lbs (2.27 kg)

760047019

HCM2UDS

Horizontal Cable Manager, Double Sided, 19 in W x 2U

Black

11.7 in (29.7 cm)

6 lbs (2.7 kg)

760047027

HCM3UDS

Horizontal Cable Manager, Double Sided, 19 in W x 3U

Black

11.7 in (29.7 cm)

6 lbs (2.7 kg)

760047035

268

Jumper Trays
The SYSTIMAX Jumper Trays aid in compliance with ANSI/TIA/EIA 568B bend radius requirements. Two styles are available to
provide upper and lower horizontal/vertical cable management and to promote a gradual, controlled bend for both UTP and
optical fiber cable.

Features and Benefits:

Provides 1.5 in (3.8 cm) bend radius for compliant installation of Category 5/5e/6 cable or fiber
Telescopes to adjust cable entry or exit position
Strong lightweight aluminum construction, black finish
Slotted holes allow bend radius location to be user adjustable
Mounting screws not included
Sold individually

Product Number Detailed Description

Color

Depth

Shipping Weight

Material ID

HC190A

Jumper Tray, Upper, 19 in W x 2U, Single Tray

Black

3.5 in (8.9 cm)

3 lbs (1.4 kg)

108528803

HC190B

Jumper Tray, Upper, 19 in W x 2U

Black

6 in (15.2 cm)

4 lbs (1.8 kg)

760034785

HC200A

Jumper Tray, Lower, 19 in W x 2U, Double Tray

Black

3.5 in (8.9 cm)

5 lbs (2.3 kg)

108528811

1100D Patch Cord

Organizer and
1100C Wall Adapter
The 1100D Cord Organizers are used for routing patch cords
in 19 in (48.3 cm) frames and wall adapters. The 1100D2 is
the interbay patch cord organizer which is used for bulk
routing cords between bays. The 1100D1 is the intrabay patch cord organizer which provides
horizontal and vertical pathways. The 110D3 is used for routing cords on the front and cable on the rear. The 1100C wall adapters
are used to mount panels on any flat surface. Hinges provide easy access to the rear of the panel without removing the unit.
The adapters can be mounted so that it hinges from the right or left side. The snap-lock pin holds the panel in place once the
unit is installed.
Product Number

Detailed Description

Material ID

1100C1-35-19

Wall Adapter

106830573

1100C1-70-19

Wall Adapter

106830581

1100D1-35-19

Intrabay Patch Cord Organizer

106830615

1100D2-35-19

Intrabay Patch Cord Organizer

106830623

1100D3-35-19

Interbay Patch Cord and Cable Organizer

107132664

269

Frames &
Cable
Management

Rack Equipment Shelves

The SYSTIMAX Shelf product family provides single and double sided shelves for miscellaneous equipment and test gear.

Features and Benefits:

Frames &
Cable
Management

Made of sturdy lightweight 0.090 aluminum construction, black finish

Holds equipment up to 17.25 in (43.8 cm) wide
Mounting hardware not included
Sold individually
Single sided equipment shelf can be wall mounted

Product Detailed
Number Description

Color

Application

Rack
Height

Depth

Equipment
Support

Shipping
Weight

Material ID

SL100A

Black

Used with RK100A

5.19 in

15 in

50 lbs (22.7 kg)

6 lbs (2.7 kg)

108527557

or RK130A

(13.2 cm)

(13.2 cm)

Used with RK100A

7.16 in

20 in

200 lbs (90.7 kg)

8 lbs (3.6 kg)

108527565

(3 in Deep Rack)

(18.2 cm)

(50.8 cm)

Used with RK130A

7.16 in

20 in

200 lbs (90.7 kg)

10 lbs (4.5 kg)

760034777

(6 in Deep Rack)

(18.2 cm)

(50.8 cm)

Equipment Tray

SL110A

Heavy Duty Shelf

Black

SL110B

Heavy Duty Shelf

Black

Rack Installation Kit

The Rack Installation Kit is used for securing equipment rack and frames to a concrete floor.
Product Number

Detailed Description

Color

Shipping Weight

Material ID

RA140A

Rack Anchor Kit, Concrete Floor

Black

1 lbs (0.45 kg)

108527524

270

Steel Frame Cabinets

The Steel Frame Cabinet provides an affordable solution for EIA 19 in
rack-mountable equipment. It is available as a fully configured cabinet or as a
frame-only cabinet with no top panel, side panels or doors.

Features and Benefits:

Fully-adjustable EIA-310-D compliant vertical mounting rails accommodate
depth-variable installation of 19 in equipment
#12-24 tapped holes or square-punched holes to accept cage nut hardware.
Available with a solid plex front door and solid metal rear door for
bottom-to-top airflow or perforated (mesh) front and rear doors for
improved front-to-rear airflow
Use wide cabinets for modular network switches and heavy fiber or
copper cabling. Wide cabinets have approximately 3 in (7.6 cm) of cable
management space along both sides of the equipment mounting rails.
Standard cabinets have approximately 1 in (2.5 cm) of cable management
space along both sides of the equipment mounting rails
Ships fully assembled
Cabinet Frame Includes:
- Four Post Frame
- Four Vertical Mounting Rails (tapped or square-punched)
- One Ring Vertical Cable Manager
- Set of Four Leveling Feet
- Multi-Bay Attachment Hardware Kit
- Floor Anchor Clamps
- Bag of 50 each #12-24 Rack Channel Mounting Screws (Tapped Rails)
- Bag of 25 each #12-24 Cage Nuts and Screws (Square-punched Rails)

Frames &
Cable
Management

Product Number

Detailed Description

Color

Dimensions

Shipping Weight

Material ID

SP200A

#12-24 Tapped Rails, w/ Sides, Solid

Black

27.3 in (69.3 cm) W X

300 lbs (136 kg)

760035089

300 lbs (136 kg)

760035097

260 lbs (117.9 kg)

760035105

260 lbs (117.9 kg)

760035113

300 lbs (136 kg)

760035121

300 lbs (136 kg)

760035139

Plex Front Door, Metal Rear Door

33.4 in (84.8 cm) D X

84 in (213.4 cm) H

SP200B

#12-24 Tapped Rails, w/ Sides, Perf

Black

Doors

27.3 in (69.3 cm) W X

33.4 in (84.8 cm) D X
84 in (213.4 cm) H

SN200A

#12-24 Tapped Rails, w/o Sides, Solid

Black

Plex Front Door, Metal Rear Door

27.3 in (69.3 cm) W X

33.4 in (84.8 cm) D X
84 in (213.4 cm) H

SN200B

#12-24 Tapped Rails, w/o Sides, Perf

Black

Doors

27.3 in (69.3 cm) W X

33.4 in (84.8 cm) D X
84 in (213.4 cm) H

SP200AW

Wide, #12-24 Tapped Rails, w/ Sides,

Black

Solid Plex Front Door, Metal Rear

33.4 in (84.8 cm) D X

84 in (213.4 cm) H

Door
SP200BW

Wide, #12-24 Tapped Rails, w/ Sides,

32.3 in (82 cm) W X

Black

Perf Doors

32.3 in (82 cm) W X

33.4 in (84.8 cm) D X
84 in (213.4 cm) H

271

Product Number

Detailed Description

Color

Dimensions

Shipping Weight

Material ID

SN200AW

Wide, #12-24 Tapped Rails, w/o

Black

32.3 in (82 cm) W X

260 lbs (117.9 kg)

760035147

260 lbs (117.9 kg)

760035154

300 lbs (136 kg)

760035162

300 lbs (136 kg)

760035170

260 lbs (117.9 kg)

760035188

260 lbs (117.9 kg)

760035196

300 lbs (136 kg)

760035204

300 lbs (136 kg)

760035212

260 lbs (117.9 kg)

760035220

260 lbs (117.9 kg)

760035238

Sides, Solid Plex Front Door, Metal

33.4 in (84.8 cm) D X

Rear Door
SN200BW

Wide, #12-24 Tapped Rails, w/o

84 in (213.4 cm) H
Black

Sides, Perf Doors

32.3 in (82 cm) W X

33.4 in (84.8 cm) D X
84 in (213.4 cm) H

SP100A

Square Punch, w/ Sides, Solid Plex

Black

Front Door, Metal Rear Door

27.3 in (69.3 cm) W X

33.4 in (84.8 cm) D X
78 in (198.1 cm) H

Frames &
Cable
Management

SP100B

Square Punch, w/ Sides, Perf Doors

Black

27.3 in (69.3 cm) W X

33.4 in (84.8 cm) D X
78 in (198.1 cm) H

SN100A

Square Punch, w/o Sides, Solid Plex

Black

Front Door, Metal Rear Door

27.3 in (69.3 cm) W X

33.4 in (84.8 cm) D X
78 in (198.1 cm) H

SN100B

Square Punch, w/o Sides, Perf Doors

Black

27.3 in (69.3 cm) W X

33.4 in (84.8 cm) D X
78 in (198.1 cm) H

Wide, Square Punch, w/ Sides, Solid

SP100AW

Black

Plex Front Door, Metal Rear Door

32.3 in (82 cm) W X

33.4 in (84.8 cm) D X
78 in (198.1 cm) H

SP100BW

Wide, Square Punch, w/ Sides, Perf

Black

Doors

32.3 in (82 cm) W X

33.4 in (84.8 cm) D X
78 in (198.1 cm) H

SN100AW

Wide, Square Punch, w/o Sides,

Black

Solid Plex Front Door, Metal Rear

33.4 in (84.8 cm) D X

Door
SN100BW

Wide, Square Punch, w/o Sides, Perf

32.3 in (82 cm) W X

78 in (198.1 cm) H

Black

Doors

32.3 in (82 cm) W X

33.4 in (84.8 cm) D X
78 in (198.1 cm) H

272

Aluminum Cabinets
The SYSTIMAX Aluminum Cabinet System supports a vast array
of potential applications. The cabinet is available in 84 in height
and two depths to meet the most stringent demands.

Features and Benefits:

Fully-adjustable EIA-310-D compliant vertical
mounting rails accommodate depth-variable
installation of 19 in equipment
#12-24 tapped holes or square-punched holes to accept
cage nut hardware
Available with a solid plex front door and solid metal rear door for
bottom-to-top airflow or perforated (mesh) front and rear doors for improved front-to-rear airflow
Use wide cabinets for modular network switches and heavy fiber or copper cabling. Wide cabinets have approximately
6 in (15.2 cm) of cable management space along both sides of the equipment mounting rails. Standard cabinets have
approximately 3 in (7.6 cm) of cable management space along both sides of the equipment mounting rails

Cabinet Frame Includes:

Four Post Frame

Four Vertical Mounting Rails (tapped or square-punched)
One Vertical Cable Manager
Set of Four Leveling Feet
Multi-Bay Attachment Hardware Kit
Floor Anchor Clamps
Bag of 50 each #12-24 Rack Channel Mounting Screws (Tapped Rails)
Bag of 25 each 12-24 Cage Nuts and Screws (Square-punched Rails)

Note: Certain servers require optimal airflow. When mounting these servers, select perforated metal doors for increased cooling and ventilation
(except when buying a frame-only configuration).

Product Number Detailed Description

Color

Dimensions

Shipping Weight

Material ID

AP200A

Black

27.3 in (69.3 cm) W X

300 lbs (136 kg)

760035246

300 lbs (136 kg)

760035253

260 lbs (117.9 kg)

760035261

260 lbs (117.9 kg)

760035279

300 lbs (136 kg)

760035287

300 lbs (136 kg)

760035295

#12-24 Tapped Rails, w/ Sides, Solid

Plex Front Door, Metal Rear Door

33.6 in (85.3 cm) D X

84 in (213.4 cm) H

AP200B

#12-24 Tapped Rails, w/ Sides,

Black

Perf Doors

27.3 in (69.3 cm) W X

33.6 in (85.3 cm) D X
84 in (213.4 cm) H

AN200A

#12-24 Tapped Rails, w/o Sides, Solid

Black

Plex Front Door, Metal Rear Door

27.3 in (69.3 cm) W X

33.6 in (85.3 cm) D X
84 in (213.4 cm) H

AN200B

#12-24 Tapped Rails, w/o Sides,

Black

Perf Doors

27.3 in (69.3 cm) W X

33.6 in (85.3 cm) D X
84 in (213.4 cm) H

AP200AW

Wide, #12-24 Tapped Rails, w/ Sides,

Black

Solid Plex Front Door, Metal Rear Door

32.3 in (82 cm) W X

33.6 in (85.3 cm) D X
84 in (213.4 cm) H

AP200BW

Wide, #12-24 Tapped Rails, w/ Sides,

Black

Perf Doors

32.3 in (82 cm) W X

33.6 in (85.3 cm) D X
84 in (213.4 cm) H

273

Frames &
Cable
Management

Product Number Detailed Description

Color

Dimensions

Shipping Weight

Material ID

AN200AW

Black

32.3 in (82 cm) W X

260 lbs (117.9 kg)

760035303

300 lbs (136 kg)

760036699

300 lbs (136 kg)

760036707

260 lbs (117.9 kg)

760036715

260 lbs (117.9 kg)

760036723

300 lbs (136 kg)

760036731

300 lbs (136 kg)

760036749

260 lbs (117.9 kg)

760036756

260 lbs (117.9 kg)

760036764

Wide, 19 in EIA #12-24 Tapped Rails,

w/o Sides, Solid Plex Front Door, Metal

33.6 in (85.3 cm) D X

Rear Door
AP300A

#12-24 Tapped Rails, w/ Sides, Vented

84 in (213.4 cm) H
Black

Plex Front Door, Perf Rear Door

27.3 in (69.3 cm) W X

42.6 in (108.2 cm) D X
84 in (213.4 cm) H

AP300B

#12-24 Tapped Rails, w/ Sides,

Black

Perf Doors

27.3 in (69.3 cm) W X

42.6 in (108.2 cm) D X
84 in (213.4 cm) H

Frames &
Cable
Management

AN300A

AN300B

#12-24 Tapped Rails, w/o Sides,

Black

27.3 in (69.3 cm) W X

Vented Plex Front Door, Perf Rear

42.6 in (108.2 cm) D X

Door

84 in (213.4 cm) H

#12-24 Tapped Rails, w/o Sides,

Black

Perf Doors

27.3 in (69.3 cm) W X

42.6 in (108.2 cm) D X
84 in (213.4 cm) H

AP500A

Square Punch, w/ Sides, Vented Plex

Black

Front Door, Perf Rear Door

27.3 in (69.3 cm) W X

42.6 in (108.2 cm) D X
84 in (213.4 cm) H

AP500B

Square Punch, w/ Sides, Perf Doors

Black

27.3 in (69.3 cm) W X

42.6 in (108.2 cm) D X
84 in (213.4 cm) H

AN500A

Square Punch, w/o Sides, Vented Plex

Black

Front Door, Perf Rear Door

27.3 in (69.3 cm) W X

42.6 in (108.2 cm) D X
84 in (213.4 cm) H

AN500B

Square Punch, w/o Sides, Perf Doors

Black

27.3 in (69.3 cm) W X

42.6 in (108.2 cm) D X
84 in (213.4 cm) H

274

Cabinet Cable
Management
The SYSTIMAX Vertical and Front-to-Back Cable Management products are used
in Data Centers of large enterprise networks or in ISP co-location and head
end facilities when cabinets support network, fiber and/or computer and data
storage equipment.

Cabinet Vertical Cable Manager

The Vertical Cable Manager allows patch cords to be organized by rack-mount
space, making it easier to trace individual cables during moves, adds and
changes. It has a snap-on cover to protect cables. Cover snaps on and opens
to the right or left for easy access to cables during moves, adds and changes.

Front-to-Back Cable Manager

The Front-to-Back Managers snap onto the vertical managers and adjust to
match the depth of the cable managers. Front-to-Back Managers adjust in
depth to connect the front and rear Vertical Manager.

Frames &
Cable
Management

Ring Vertical Cable Manager

The Ring Vertical Cable Manager provides additional cable management
(one pair of cabling ring sections and eight rings are included with each cabinet or frame).

Product Number

Detailed Description

Color

Shipping Weight

Material ID

FB100W

Front-to-Back Cable Manager, Wide

Black

9 lbs (4.08 kg)

760035345

FB100N

Front-to-Back Cable Manager, Narrow

Black

10 lbs (4.54 kg)

760035352

CM100A

Ring Vertical Cable Manager, 6 ft - 6 in (198.1 cm) Cabinet

Black

7 lbs (3.18 kg)

760035329

CM100B

Ring Vertical Cable Manager, 7 ft (213.4 cm) Cabinet

Black

7 lbs (3.18 kg)

760035337

CM100BW

Vertical Cable Manager, Wide, 7 ft (213.4 cm) Cabinet

Black

12 lbs (5.44 kg)

760035360

CM100AW

Vertical Cable Manager, Wide, 6 ft - 6 in (198.1 cm) Cabinet

Black

11 lbs (4.99 kg)

760035378

CM100BN

Vertical Cable Manager, Narrow 7 ft (213.4 cm) Cabinet

Black

14 lbs (6.35 kg)

760035386

CM100AN

Vertical Cable Manager, Narrow, 6 ft - 6 in (198.1 cm) Cabinet Black

13 lbs (5.9 kg)

760035394

HT100A

Horizontal Cable Tray

Black

275

760036772

Cabinet Equipment
Shelves
The SYSTIMAX Cabinet Shelves provides convenient mounting shelves for
CPUs, power supplies, printers or any telecommunications equipment.
The Low Profile Fixed Shelf has a unique telescoping
design delivers between 20 in (50.8 cm) and 36 in (91.4 cm) of
continuous support for up to 100 lbs (45.4 kg) of equipment in
less than 1 RMU of rack-mount space
The Fixed Shelves are designed to support heavier equipment. And supports up to 250 lbs (113.4 kg)
The 32 in Deep Sliding Shelf provides a flexible design to reduce kinking, twisting, and cutting of cables during
self-extension and retraction. The cable management belt provides a greater flexibility in the storage of wire bundles. The shelf
supports up to 160 lbs (72.57 kg) using less than two RMU
The Extra Heavy Duty 4-Point Solid Sliding shelf provides support of heavy equipment up to 300 lbs (136.1 kg). The shelf
uses only 2 RMU of mounting space
Frames &
Cable
Management

Product Number Detailed Description

Color Shipping Weight Material ID

LP19VNT

Low Profile Cabinet Shelf, 100 lbs (45.36 kg) Capacity, Vented

Black

15 lbs (6.8 kg)

760035428

FXD29DSOL

Fixed Cabinet Shelf, 250 lbs (113.4 kg) Capacity, Solid 29 in (73.7 cm) D

Black

11 lbs (4.99 kg)

760035436

FXD29DVNT

Fixed Cabinet Shelf, 250 lbs (113.4 Kg) Capacity, Vented 29 in (73.7 cm) D Black

10.5 lbs (4.76 kg)

760035444

SLD32DSOL

Sliding Cabinet Shelf, 160 lbs Capacity, Solid 32 in (81.3 cm) D

Black

25 lbs (11.34 kg)

760036798

SLD32DVNT

Sliding Cabinet Shelf, 160 lbs (72.57 kg) Capacity, Vented 32 in (81.3 cm) D Black

25 lbs (11.34 kg)

760036780

ESLD32DSOL

Sliding Cabinet Shelf, 300 lbs (136 kg) Capacity, Solid 32 in (81.3 cm) D

29 lbs (13.15 kg)

760036806

Black

Cabinet Fan Kits

SYSTIMAX Cabinet fan kits provide ventilation and cooling. These
fan kits are used with the SYSTIMAX steel and aluminum cabinets.
The Steel cabinet fan kit provides ventilation and cooling with a
built-in redundancy of a three-fan system. The design allows the
fans to exhaust warm air out of the top of the cabinet.
The Aluminum Cabinet Fan Kit is designed to provide ventilation and
cooling with four fans mounted on two interchangeable frames to fit the cabinet top panel.

Product Number

Detailed Description

Color

Shipping Weight

Material ID

TS115FK

Steel Cabinet Fan Kit, 115V

Black

8 lbs (3.63 kg)

760035451

TS230FK

Steel Cabinet Fan Kit, 230V

Black

8 lbs (3.63 kg)

760035469

MF115FK

Aluminum Cabinet Fan Kit, 115V

Black

6 lbs (2.72 kg)

760035477

MF230FK

Aluminum Cabinet Fan Kit, 230V

Black

6 lbs (2.72 kg)

760035485

276

Equipment Frame System Accessories

The SYSTIMAX Equipment Frame System Accessories provide support for the various components of the SYSTIMAX rack and
cabinet product offer.
Filler panels fill empty spaces between mounted equipment to give a sturdy aluminum construction
The #12-24 Combination Pan Head, Pilot Point Mounting Screws attach equipment to racks and cabinets. A cutting notch in
the thread removes paint in threaded holes to improve metal-to-metal contact. The pilot point reduces cross-threading. The
combination head can be used with #3 Phillips and slotted screw drivers
Air dry lacquer for touching up finish. Matches color and gloss of CPIs textured paint. Note: This cannot be shipped via air
Cable ties used to strap together free hanging computer cable for a tangle-free installation.

Product Number

Detailed Description

Color

Shipping Weight

Material ID

FPNL1U

Filler Panel, 19 in EIA 1U

Black

Less 1 lb (0.45 kg)

760034751

FPNL2U

Filler Panel, 19 in EIA 2U

Black

Less 1 lb (0.45 kg)

760034769

FPNL3U

Filler Panel, 19 in EIA 3U

Black

Less 1 lb (0.45 kg)

760043521

CR230A

Spray Paint, Touch Up

Black

2 lbs (0.91 kg)

108867102

MS100A

Mounting Screws, Pan-Head, #12-24, 50/pk

Black

1 lb (0.45 kg)

108527450

MS200A

Mounting Screws, Pan-Head, #12-24, 1,000/pk

Black

9 lbs (4.1 kg)

108527451

EC130A

Cable Tie, Velcro, 3/4 in (1.9 cm) X 9 in (22.9 cm), 25/pk

Teal

Less 1 lb (0.45 kg)

108528118

Equipment Frame Grounding Solution

The SYSTIMAX Grounding products bond cable runway components and connect equipment frames to the
telecommunications ground.
SYSTIMAX Cable Runway Ground Strap Kits provide a ground pathway between cable runway lengths when fastened
together across splices
The Two Mounting Hole Ground Terminal Block provides a convenient way to attach ground wires to racks or cabinets and
meets BICSI and ANSI/TIA/EIA two-hole mounting recommendations. Constructed of extruded, high-strength aluminum
and accepts conductors ranging from #14 AWG through 2/0. Includes two #3/8-24 x 7/8 in L stainless steel set screws
Product Number

Detailed Description

Color

CGT200

Runway Grounding Kit

RA100A

Two Mounting Hole Ground Terminal Block

277

Shipping Weight

Material ID

Green

0.5 lb (0.23 kg)

760035030

Black

1 lb (0.45 kg)

108528951

Frames &
Cable
Management

EMEA Cabinets and

Accessories
The SYSTIMAX cabling cabinet unique design maximizes the open area available to
bring in cables, especially in the two areas most used for cable entry at the rear of the
rack and at the sides (top or bottom). The SYSTIMAX cabling cabinet frame design also
ensures the cables flow over a smooth surface, which will not damage the data cables.
In addition to this functionality it is supported by the SYSTIMAX SCS 20-Year Warranty.

Features and Benefits:

Frames &
Cable
Management

Outstanding cable volume

Multiple cable entry
Vertical cable channels
Lightweight, for ease of installation
Load rated to 500 kg for standard cabling cabinet and 900 kg for server cabinet
Right/left handed door openings
Easily removed and refitted cladding
Future proofcan accommodate both 19 in and ETSI equipment
Accessories can easily be added or changed 42U (75SU)
2 width options600 mm and 800 mm
2 depth options800 mm and 1,000 mm (only available in server cabinet)
Bayed cabinet options available for all versions
All cabinets include earthing scuibs (cables and connectors)
All cabinets include cable tray installed to assist with cable management

Cabinets-Cabling
Detailed Description

Material ID

47U 800 x 800 mm Cabinet

999902096

47U 800 x 800 mm Baying Cabinet V2

999902098

47U 600 x 800 mm Cabinet V2

999902097

47U 600 x 800 mm Baying Cabinet V2

999902099

42U 800 x 800 mm Cabinet V2

999902092

42U 800 x 800 mm Baying Cabinet Plus Brackets (Comes without side panels) V2

999902094

42U 600 x 800 mm Cabinet V2

999902093

42U 600 x 800 mm Baying Cabinet Plus Brackets (Comes without side panels) V2

999902095

25U 800 x 800 mm Cabinet V2

999902100

25U 600 x 800 mm Cabinet V2

999902101

25U 800 x 800 mm Baying Cabinet V2

999902102

25U 600 x 800 mm Baying Cabinet V2

999902103

12U 400 mm Wallbox + 100 mm Rear Section

999902028

15U 400 mm Rear/100 mm Rear Section

999902029

278

Cabinets-Server
Detailed Description

Material ID

47U 800 x 1,000 Cabinet V2

999902105

47U 800 x 1,000 Baying Cabinet V2

999902107

47U 600 x 1,000 Cabinet V2

999902104

47U 600 x 1,000 Baying Cabinet V2

999902106

42U 600 x 1,000 Cabinet V2

999902055

42U 600 x 1,000 Baying Cabinet

999902065

42U 800 x 1,000 Cabinet

999902068

42U 800 x 1,000 Baying Cabinet

999902069
Frames &
Cable
Management

Cabinets-Accessories
Detailed Description

Material ID

Standard 800 Deep (566 mm) Chassis Tray Support Angles for 19 in Applications

999902009

Standard 600 Wide (19 in) x 566 mm Deep Vented Chassis Tray

999902010

Standard 600 Wide (19 in) x 625 mm Deep Vented Sliding Shelf Kit,
with a Load Rating of 35 kg

999902011

800 Wide x 800 Deep x 100 mm High Unvented Plinth Kit

999902012

600 Wide x 800 Deep x 100 mm High Unvented Plinth Kit

999902013

Wallbox Fan Tray

999902022

Top Mounted Fan Tray c/w 4 of Fans Fitted for Air Extraction

999902003

Standard Castor/Leveller Combination Kit (4 of )

999902002

UK 2 meter Long Fan Tray Lead

999902004

Euro 2 meter Fan Tray Lead

999902076

9 Way UK Power Strip

999902005

9 Way Schuko Power Strip

999902007

5 Way UK Power Strip

999902006

5 Way Schuko Power Strip

999902008

13 Way Plus Switch and Cover Schuko

999902063

Shelve H D Fixed 19 in x 556 Kit

999902082

Shelve H D Sliding 19 in x 630 Kit

999902083

Raft for IMnet II 600 mm Deep

999902086

Raft for IMnet II 800 mm Deep

999902087

Note: Variations on standard product available on request.

279

Cable Runway System

The SYSTIMAX Cable Runway System provides improved cable
organization for easy cable changes. Cable runways
prevent tangles and cable damage to maintain
quality data transmission.

Frames &
Cable
Management

Product Number Detailed Description

Runway Width

Color Shipping Weight Material ID

CR100A

Cable Runway Straight

12 in (30.5 cm)

Black

25 lbs (11.4 kg)

108528902

CR100B

Cable Runway Straight

18 in (45.7 cm)

Black

29 lbs (13.2 kg)

760034959

CR200A

Cable Runway Bend 90 Outside

12 in (30.5 cm)

Black

4 lbs (1.8 kg)

760036608

CR200B

Cable Runway Bend 90 Outside

18 in (45.7 cm)

Black

9 lbs (4.1 kg)

760036616

CR200C

Cable Runway Bend 90 Inside

12 in (30.5 cm)

Black

4 lbs (1.8 kg)

760042390

CR200D

Cable Runway Bend 90 Inside

18 in (45.7 cm)

Black

9 lbs (4.1 kg)

760042408

CR300A

Cable Runway Curve

12 in (30.5 cm)

Black

12 lbs (5.5 kg)

760036624

CR300B

Cable Runway Curve

18 in (45.7 cm)

Black

19 lbs (8.6 kg)

760036632

CR180A

Wall Angle Support Kit

12 in (30.5 cm)

Black

4 lbs (1.8 kg)

108528696

CR180B

Wall Angle Support Kit

18 in (45.7 cm)

Black

6 lbs (2.7 kg)

760035071

CR190A

Threaded Rod Ceiling Kit, 5/8 in

12 in (30.5 cm) or 18 in (45.7 cm)

Gold

7 lbs (3.2 kg)

108528704

CR220A

Runway End-Bar

12 in (30.5 cm)

Black

6 lbs (2.7 kg)

108867177

CR220B

Runway End-Bar

18 in (45.7 cm)

Black

7 lbs (3.2 kg)

760035048

CR150A

Runway, Butt-Splice Kit

12 in (30.5 cm) or 18 in (45.7 cm)

Black

1 lbs (0.5 kg)

108528647

CR150B

Runway 90-Degree Junction Kit

12 in (30.5 cm) or 18 in (45.7 cm)

Black

1 lbs (0.5 kg)

108528654

CR160B

Runway 90-Degree Splice Kit

12 in (30.5 cm) or 18 in (45.7 cm)

Black

1 lbs (0.5 kg)

108527540

CR100CAP

Protective End Cap

12 in (30.5 cm) or 18 in (45.7 cm)

Black

1 lbs (0.5 kg)

760036673

CR100FT

Cable Runway Foot Kit

12 in (30.5 cm) or 18 in (45.7 cm)

Black

4 lbs (1.8 kg)

760036681

CR170A

Triangular Support Kit

12 in (30.5 cm)

Black

5 lbs (2.3 kg)

108528688

CR170B

Triangular Support Kit

18 in (45.7 cm)

Black

9 lbs (4.1 kg)

760035022

Cable Runway Wall-to-Rack Kit for

12 in (30.5 cm)

Black

32 lbs (14.5 kg)

760034967

12 in (30.5 cm)

Black

24 lbs (10.9 kg)

760034975

To Rack Kit 2 in

Black

1.5 lbs (0.7 kg)

760035063

Black

2 lbs (0.9 kg)

760035055

CR100WA

3 in (7.6 cm) Channel Rack

Use With Racks: RK100A
CR100WB

Cable Runway Wall-to-Rack Kit for

6 in (15.2 cm) Channel Rack
Use With Racks: RK130A

CR221R

Runway Elevation to Rack Kit

Used with CR110A, CR110B, CR111A, (5.1 cm) 3 in (7.6 cm)

or CR111B sold separately
CR221C

Runway Elevation to Cabinet Kit

To Cabinet Kit 2 in

Used with CR221C

(5.1 cm) 3 in (7.6 cm)

280

Product Number Detailed Description

Runway Width

Color Shipping Weight Material ID

CR110A

12 in (30.5 cm)

Black

5 lbs (2.3 kg)

108528662

18 in (45.7 cm)

Black

7 lbs (3.2 kg)

760034983

12 in (30.5 cm)

Black

5 lbs (2.3 kg)

760034991

18 in (45.7 cm)

Black

7 lbs (3.2 kg)

760035006

Adjustable Rack Mounting Plate

for 3 in (7.6 cm) D Rack
Used with Racks: RK100A

CR110B

Adjustable Rack Mounting Plate

for 3 in (7.6 cm) D Rack
Used with Racks: RK100A

CR111A

Adjustable Rack Mounting Plate

for 6 in (15.2 cm) D Rack
Used with Racks: RK130A

CR111B

Adjustable Rack Mounting Plate

for 6 in (15.2 cm) D Rack
Used with Racks: RK130A

CR120A

Runway Radius Drop

12 in (30.5 cm)

Black

108528910

CR120B

Runway Radius Drop

18 in (45.7 cm)

Black

760035014

CR130A

Runway Radius Drop, Stringer, 5 in

12 in (30.5 cm) or 18 in (45.7 cm)

Black

108528936

(12.7 cm) Long

281

Frames &
Cable
Management

Frames &
Cable
Management

282

Glossary

Glossary

283

Glossary of Terms
The following glossary offers explanations for a number of
terms used in this catalog. It additionally provides explanations
for a number of other terms frequently used within the
networking and cabling industries.

10BASE-T
10 Mb/s Ethemet using 2-pairs of Category 3 cable.

100BASE-T4

Ad hoc cabling
Cabling scheme where different types of cabling components
from different vendors are linked together to form a cabling
system.

100 Mb/s Fast Ethernet using 4-pairs of Category 3 cable.

Alien Crosstalk

100BASE-TX

Signal coupling between adjacent cabling componets (cables,

connectors) or between adjacent links or channels.

100 Mb/s Fast Ethernet using 2-pairs of Category 5 cable.

100VG-AnyLAN

Glossary

of legacy multimode. Up to 300 m reach on laser optimized

(OM3) multimode fiber (up to 550 m supported on enhanced
OM3 fiber).

Analogue transmission

100 Mb/s LAN using Demand Priority Protocol originally

developed by Hewlett Packard and AT&T for Category 3 cable.

A method of signal transmission in which the shape of the signal

is a continuously variable and directly measurable physical
quantity such as voltage.

1000BASE-T

Application

1000 Mb/s (1 Gbps) Ethernet using 4-pairs of Category 5e cable.

A system, with its associated transmission method which is

supported by telecommunications cabling.

1000BASE-TX
A low cost alternative to 1000BASE-T developed by TIA for
Category 6 cabling.

1000BASE-SX
1000 Mb/s (1 Gbps) Ethernet operating on multimode fiber
with short wave lasers (850 nm).

1000BASE-LX

Application layer
The uppermost layer (layer 7) of the open systems interconnection
(OSI) model. This layer is concerned with support to the user
application and is responsible for managing the communication
between applications, e.g. Email, File transfer, etc.

ASCII

1000 Mb/s (1 Gbps) Ethernet operating on multimode fiber

with long wave lasers (1300 nm).

The American Standard Code for Information Interchange. A

widely-used 7 or 8 bit binary code used to represent alphabetic
and numeric characters in computer understandable form.

10GBASE-T

Asynchronous

10 Gbps Ethernet using 4-pairs of Category 6 or better cabling.

Two or more signals sourced from independent clocks, therefore

having different frequency and phase relations.

10GBASE-LR
10 Gigabit Ethernet operating at long wavelength (1300 nm)
on singlemode optical fiber. 10GBASE-LR is the LAN version,
10GBASE-LW is the WAN version. Up to 10 Km reach.

10GBASE-LX4
10 Gigabit Ethernet operating at long wavelength (1300 nm)
on multimode or singlemode optical fiber. Designed to overcome the imperfections of legacy multimode fiber, by utilizing
4 lasers and 4 detectors operating at different wavelengths.
Up to 300 m reach on multimode, 10 Km on singlemode.

10GBASE-SR
10 Gigabit Ethernet operating at short wavelength (850 nm)
on laser optimized (OM3) multimode fiber. The lowest cost
transceiver alternative, taking advantage of the advances in
multimode fiber terchnology that eliminate the imperfections

Asynchronous data transfer

A method of data transfer in which each alphabetic or numeric
character (represented by 7 or 8 bits) is preceded by start and
stop bits to delineate the 7/8 bit pattern from the ideal pattern
which otherwise occupies the (digital) transmission medium.

Asynchronous transfer mode (ATM)

A high-speed cell-based switching and multiplexing technology
based on segmentation of voice, data and video into fixed
packets (cells). These cells are transferred along switched paths
and are not received on a regular basis (hence the term asynchronous).

Attenuation
The effect of signal dwindling, experienced with accumulating
line length or distance of radio transmission.

284

Backbone(s)

Building entrance facility

The part of a premises distribution system that includes a main

cable route and facilities for supporting the cable from the
equipment room to the upper floors, or along the same floor
to the wiring closets.

A facility that provides all necessary mechanical facility and

electrical services, that complies with all relevant regulations,
for the entry of telecommunications cables into a building.

Balanced circuit

Consists of a common transmission path with a number of

nodes attached to it. Sometimes referred to as linear network
topology.

A circuit where equal and opposite signals are generated and

sent on to two conductors. The better the balance of a circuit,
the lesser is its emissions and the greater is its noise immunity
(hence the better is its EMC performance).

BUS

Cable fill

Balanced twisted pair cable

The ratio of cable installed into a conduit/trunking against the

theoretical maximum capacity of the conduit/trunking.

A cable consisting of one or more metallic symmetrical cable

elements (twisted pairs or quads).

Cable routing diagram

A detailed drawing showing the layout of the cable routes.

Balun

Cabling

An adapter used to convert balanced to unbalanced signals

in order to connect legacy equipment or video devices to
structured cabling.

A system of telecommunications cables, cords and connecting

hardware that can support the connection of information
technology equipment.

Bandwidth

Campus

The range of frequencies that can be used for transmitting

information on a channel. It indicates the transmission-carrying
capacity of a channel. Thus, the larger the bandwidth, the
greater the amount of information that can pass through
the circuit. Measured in hertz or bits per second or MHz-Km
(for fiber).

A premises containing more than one building adjacent or

near to one another.

Campus backbone cabling

A cable that connects the campus distributor to the building
backbone distributor(s). Campus backbone cables may also
connect building cabling distributors directly.

Bit error rate (BER)

A measure of quality of a digital transmission line, either quoted
as a percentage, or more usually as a ratio, typically 1 error in
10E8 or 10E9 bits carried. The lower the number of errors, the
better the quality of the line.

Carrier sense multiple access/collision (CSMA/CD)

Network access method in which nodes contend for the right
to send data. If two or more nodes attempt to transmit at the
same time, they abort their transmission until a random time
period of microseconds has transpired and then attempt
to resend.

Bridge(s)
A device used to link two subnetworks using the same
communications method and sometimes the same kind of
transmission medium.

Category 3
Industry standard for cable and connecting hardware products
with transmission characteristics specified to 16 MHz, designed
to support digital transmission of 10 Mb/s.

Building backbone cable

A cable that connects the building distributor to a floor
distributor. Building backbone cables may also connect floor
distributors in the same building.

Category 5

Building distributor
A distributor in which the building backbone cable(s)
terminate(s) and at which connections to the campus backbone
cable(s) may be made.

Industry standard for cable and connecting hardware

products with transmission characteristics specified to 100
MHz, designed to support digital transmission of 100 Mb/s.

Category 5e
Enhanced Category 5 specifications for cable and connecting
hardware products with transmission characteristics specified
to 100 MHz, intended to support digital transmission of 1000
Mb/s.

285

Glossary

Category 6

Coaxial Cable (COAX)

Industry standard for cable and connecting hardware

products with transmission characteristics specified to 250
MHz, designed to support digital transmission in excess of
1000 Mb/s.

A cable with a center conductor surrounded by a thick insulation,

surrounded by an outer conductor made of metal braid. An
outer jacket insulation is optional.

Category 6A

This architecture is a backbone topology where wiring

concentrators located at floor levels are attached in a star
configuration to a central high performance switching
concentrator.

Collapsed backbone

Specification currently in draft to become an industry standard

for cable and connecting hardware products with transmission
characteristics specified to 500 MHz, designed to support
digital transmission of 10 Gbps.

Category 7
Industry standard for cable and connecting hardware products
with transmission characteristics specified to 600 MHz, and
requiring individually shielded pair cables. May require either a
switched RJ45 or a non-RJ45 connector.
Glossary

Ceiling distribution
Distribution system that uses the space between the false or
suspended ceiling and the structural ceiling for housing
horizontal cable routes.

Cell relay
A fast packet switching technique which uses fixed-length
cells. Generic name for ATM, SMDS and BISDN.

Consolidation point
An interconnection point in horizontal cabling, typically used
to support the re-arrangement of furniture cloisters.

Cords
A short length of copper wire or fiber optic cable with connectors
on each end. Used to connect equipment to cabling, or to
connect cabling segments (cross-connection).

Cross-connect
A facility enabling the termination of cable elements and their
connection, primarily by means of patch cords or jumpers.

Crosstalk

European committee for electrotechnical standardization.

An electromagnetic coupling between two physically isolated

circuits in a system. This coupling causes a signal on one circuit
to induce a noise voltage on adjacent circuits, thereby causing
signal interference.

CENELEC EN50173

CSMA/CD

The European standard for generic cabling for customer

premises.

See Carrier Sense Multiple Access/Collision Detect.

CENELEC EN50174

Customer owned equipment used to terminate or process

information from the public network (i.e. Multiplexer or PABX).

CENELEC

A proposed European cabling systems planning & installation

standard being developed by CENELEC.

Channel

Customer premises equipment (CPE)

Data circuit terminating equipment (DCE)

The end-to-end transmission path connecting any two pieces

of application-specific equipment. Equipment cables and work
area cables are included in the channel.

The equipment terminating and controlling the transmission

line, and often marking the end point of the public data
network. Data terminal equipments (DTEs) such as computers
are connected directly to DCE.

Churn

Data terminating equipment (DTE)

The relocation of an individual or a group of individuals within

a building such that the workspace or services to the workspace
require change.

The term used to describe any type of computer or other

equipment, when connected to a data communications network.

Client/server

Layer 2 of the OSI model. This layer is responsible for error free
transmission of bits on a physical interface. Also known as the
link layer. The best known layer 2 protocol is HDLC (High Level
Data Link Control).

A technique by which processing can be distributed between

nodes requesting information (clients) and those maintaining
data (servers).

Datalink layer

286

Decibel (dB)

Ethernet

A unit used to measure relative increase or decrease in power,

voltage or current, using a logarithmic scale.

A LAN originally developed by DEC, Xerox and Intel. It uses the

CSMA/CD protocol.

Digital transmission

Fast Ethernet

A technique in which all information is converted into binary

digits for transmission.

A 100 Mb/s LAN based on CSMA/CD protocol. See 100BASE-T.

Distributor

See Optical Fiber.

Fiber

The term used for the functions of a collection of components

(i.e. patch panels, patch cords) used to connect cables.

Fiber channel

EIA/TIA 568B

This is an ANSI standard describing point to point and switched

point to point physical interface, transmission protocol, signalling
protocol, services and command set mapping of a high
performance serial link for uses between mainframe computers
and computer peripherals.

North American commercial building telecommunications

wiring standard.

Fiber distributed data interface (FDDI)

EIA/TIA
North American Standards organization.

An American National Standards Institute standard for

fiber-based token passing access protocol that operates at a
100 Mb/s data transfer rate.

EIA/TIA 569A
North American commercial building standard for
telecommunications pathways and spaces. Its purpose is
to standardize specific design and construction practices
within and between buildings which are in support of
telecommunications media and equipment.

Flood wiring
The concept of wiring for future growth, by providing full
coverage of information outlets.

EIA/TIA 606

Flood distributor

North American administration standard for the telecommunications infrastructure of commercial buildings. Its purpose is to
provide guidelines for a uniform administration scheme for the
cabling infrastructure.

The distributor used to connect between the horizontal

cable and other cabling subsystems or equipment (see
telecommunications closet).

Electromagnetic compatibility (EMC)

A cable that uses a metallic foil to surround the conductors in

a twisted pair cable.

The ability of a system, equipment or device to operate

satisfactorily in its environment without introducing
unacceptable electromagnetic disturbance, or being affected
by that environment.

Electromagnetic flux
Electric and magnetic fields (commonly referred to as
emissions) generated by equipment or system.

Foil screened twisted pair cable (FTP)

Full duplex
Simultaneous two-way communication on the same link or
cabling channel.

Full duplex Ethernet

Electromagnetic interference (EMI)

Full duplex Ethernet allows nodes to transmit and receive data

at the same time, doubling throughput between workstation
and switch.

The interference in signal transmission or reception caused by

the radiation of electric and magnetic fields.

Generic cabling

Equipment cable
A cable connecting equipment to a distributor.

Equipment room

A structured telecommunications cabling system, capable

of supporting a wide range of applications. Generic cabling
can be installed without prior knowledge of the required
applications. Application-specific hardware is not a part
of generic cabling.

A room dedicated for housing distributors and applicationspecific equipment.

287

Glossary

Grid Computing

Intelligent buildings

Grid computing makes spare CPU horsepower available across

the network to large jobs that require it, by harnessing the
capabilities of dispersed devices across the network.

Buildings that maximize the efficiency of its occupants and

allow effective management of resources with minimum life-time
costs (Source: European Intelligent Building Group).

Half duplex

Interconnect

Two-way transmission on a single link or cabling channel, one

direction at a time.

A location at which equipment cables are terminated and

interconnected to the cabling subsystems without using a
patch cord or jumper.

Horizontal cable
A cable connecting the floor distributor to the telecommunications outlet(s).

Interface cards

Horizontal runs

Interference

See horizontal subsystem.

A signal impairment caused by the interaction of another

unwanted signal.

Horizontal subsystem
Glossary

ISO

The part of the premises distribution system installed on one

floor that includes the cabling and distribution components
connecting the riser backbone or equipment wiring to the
information outlet.

International Standards Organization.

ISO seven layer model

A 7 layer hierarchical reference structure model developed by
the ISO for defining, specifying and relating communications
protocol.

Hub
A concentrator or repeater in a star topology at which node
connections meet.

ISO/IEC IS 11801

Hybrid cable

The international standard for generic cabling for customer

premises.

An assembly of two or more different types of cable units,

cables or categories covered by an overall sheath. It may be
covered by an overall shield.

ISO/IEC 14763-1
The international standard for basic administration of generic
cabling.

IEC 60332
The international standard covering fire performance of cables.

IEEE
Institute of Electrical and Electronic Engineers in the USA. This
organization is also involved in producing Local Area Network
standards such as Ethernet.

Individual pair screened

Where each twisted pair in one overall cable has its own screen.

InfiniBand architecture
A high bandwidth switched network topology currently being
developed for Storage Area Networks (SANS).

See Network Interface Cards.

Jumper
A cable unit or cable element without connectors used to
make a connection on a cross-connect.

Keying
A mechanical feature of a connector system which guarantees
correct orientation of a connection or prevents the connection
to a jack or optical fiber adapter of the same type intended for
another purpose.

Permanent link

Integrated services digital network (ISDN)

The transmission path between two mated interfaces of

generic cabling, excluding equipment cables, work area cables
and cross-connections.

Integrated voice and data network based on digital

communications technology and standards interfaces.

Local area network(s) (LANs)

A LAN allows users to share information and computer resources.
Typically, a local area network is limited to a single building.

288

Multimedia

PABX

A means of conveying information with components in

different media such as voice, music, text, graphics, image
and video.

Private Automatic Branch Exchange. A private switching system

that switches calls both internally within a building or premises
and outside to the telephone network.

Multimode fiber

Packet switching

Optical fibers that have a large core and that permit non-axial
rays or modes to propagate through the core.

A type of exchange or network which conveys a string of

information from origin to destination by cutting it up into a
number of packets and carrying each independently. A
packet-switched effect could be achieved by sending
individual pages of a book through the post separately. The
receiving device re-assembles the message. Thus a direct
connection between origin and destination does not exist at
any point.

Network architecture
Network topology and design.

Network interface cards (NICs)

The piece of equipment that is installed into the expansion
port of a personal computer and allows communication
between the PC and the network.

Patch cord(s)
Flexible cable unit or element with connector(s), used to
establish connections on a patch panel.

Network layer
The network layer is layer 3 of the OSI model. This layer sets
up an end-to-end connection across a network determining
which permutation of individual links to be used. Thus the
network layer performs overall routing functions.

Patch panel(s)
Termination and administration hardware designed to
accommodate the use of patch cords. It facilitates administration
for moves and changes.

Node(s)
A piece of communications equipment on the network.

Pathway(s)

Noise

Designated cable routes and/or support structures in a false

floor or ceiling.

The term used for spurious signals produced in a conductor

by sources other than the transmitter to which it is connected.
Noise can affect a legitimate signal to the extent that it is
inaccurate or indecipherable when it reaches the receiver.
The higher the speed of data transmission, the worse the
effects of noise become.

Peripheral(s)
Additions to a system, a resource (i.e. printer, scanner, etc).

Physical layer
Layer 1 of the open systems interconnection (OSI) model. The
physical layer protocol is the hardware and software in the line
terminating device which converts the databits needed by the
datalink layer into the electrical pulses, modem tones, optical
signals or other means which will transmit the data.

Open system interconnection (OSI)

A conceptual model specified by CCITT recommendations in
the X200 series. The model describes the 7-layer process of
communication between co-operating computers. The model
provides a standard for the development of communication
protocols allowing for computers of different manufacturers
to be interconnected.

Physical topology
Physical cabling layout (i.e. ring, bus, star wired etc).

Ports

Optical fiber
A transmission medium consisting of a core of glass or plastic
surrounded by a protective cladding. Signals are transmitted as
light pulses, introduced into the fiber by a light transmitter (i.e.
Laser or an LED).

Outlets
A term used to describe the sockets provided in the work
location of a structured cabling system. These are usually 8-pin
modular sockets which can support a variety of services (i.e.
voice, video and data).

A computer interface capable of transmitting and or receiving

information.

PowerSum
A method of testing and measuring crosstalk in multi-pair
cables that accounts for the sum of crosstalk affecting a pair
when all other pairs are active. This is the only method of
specifying crosstalk performance that is suited to cables with
more than four pairs.

289

Glossary

Presentation

Serial data transmission

Layer 6 of the OSI model. Responsible for identifying the syntax

of layer the data being transmitted.

Data transmission between computer devices using only a

single circuit path. Whole bytes of information (8 bits) are sent
in sequential pattern. Compares with parallel transmission.
Parallel transmission is often used internally within computing
devices because of the higher processing speeds which are
possible, but for long-distance telecommunication, serial
transmission is more economic in terms of line plant.

Proprietary networks
Networks that are not designed or installed to standard based
guidelines and do not relate specifically to any relevant standard.

Proprietary

Serial port(s)/transmission

Systems that are not standards specific and therefore are not
interoperable with standards based equipment.

Normally a DB 9-pin connector located on the mother board

of a PC. A technique in which each bit of information is sent
sequentially on a single channel.

Protocol(s)

Glossary

A rule of procedure by which computer devices

intercommunicate. Thus a protocol is the equivalent of a
human language, with punctuation and grammatical rules.

Server(s)

Public network interface

Session layer

A point of demarcation between public and private network.

In many cases the public network interface is the point of
connection between the network providers facilities and the
customer premises cabling.

Layer 5 of the OSI model. Responsible for establishment and

control of dialogues between users on different machines.
Synchronization for reliable data transfer and token management
to control use of the connection are services provided by this
layer.

Host computer(s).

Raceway

Shielded twisted pair cable (STP)

Any distribution method designed for holding cables, (i.e.

conduit, metal or plastic trunking, cable trays, etc).

Redundancy risers
A fail-safe method of splitting and routing riser/backbone cables
via two or more riser cores. Also known as diverse routing.

Ring
A closed loop network topology.

Riser(s)
The term used to describe a space utilized by backbone
cabling to house communications cabling and other building
services. This space should preferably be specified, or allowed
for, at the time of the building design.

Router(s)

An electrically conducting cable comprising one or more

elements each of which is individually shielded. There may
be an overall shield in which case the cable is referred to as a
shielded twisted pair cable with an overall shield.

Signal to noise ratio (SNR)

The ratio of the signal magnitude to the noise magnitude and
is usually expressed in dB. The higher the SNR of a system, the
better is its performance.

Simplex
A transmission means allowing only one direction of
transmission. (i.e. public broadcast radio.)

Singlemode

An intermediate system between two or more networks capable

of forwarding data packets at the network layer (layer 3).

Optical fiber with a small core diameter in which only

singlemode is capable of propagation. 8.3 micron is the
common standard core size.

Scaleable

Splice

The ability to adapt to different bit rates.

A joining of conductors or fibers, generally from separate cables.

Screened cable

Star

See foil screened twisted pair cable.

A physical point to point network topology.

Serial communications

Star physical topology

See serial data transmission.

See Star.

290

Star quad

Telecommunications outlet

A cable element which comprises four insulated conductors

twisted together. Two diametrically facing conductors from a
transmission pair.

A socket where the horizontal cable terminates. The

telecommunications outlet provides the interface to the
work area cabling.

Star topology

Thick coax

See Star.

Storage Area Network (SAN)

The transmission medium used for Ethernet or IEEE 802.3

10BASE-2 LANs. It is a 50 ohm thick coax cable (commonly
referred to as the thick yellow cable).

A high speed network or subnetwork of shared storage

devices.

Token ring

See shielded twisted pair cable.

The transmission medium used for IEEE 802.3 10BASE-2 LANs

(sometimes referred to as CheaperNet). It is a 50 ohm thin coax
cable.

Structured cabling

Token ring LAN

Flexible cabling scheme which allows rapid reconfiguration for

office moves through patching.

A 4 or 16 Mb/s LAN standard based on token passing access

protocol originally developed by IBM. Sometimes referred to as
IEEE 802.5 or ISO 8802-5 standard.

STP

Switching
A function carried out by a switching hub, alleviating traffic
by making virtual connections between transmitting and
receiving nodes.

Topology

Synchronization

TP-PMD

The method by which the bit patterns appearing on digital line

systems may be properly clocked and interpreted - allowing
the beginning of particular patterns and frame formats to be
correctly identified.

Twisted Pair Physical Medium Dependant. A twisted pair version

of the FDDI standard that allows 100 Mb/s transmission over
Category 5 copper cable.

Synchronous

A sensing device that converts a signal from one form to

another (i.e. mechanical to electrical).

Signals that are sourced from the same timing reference and
hence are identical in frequency.

Synchronous data transfer

Data transfer employing synchronized transmit and receive
clocks, rather than using start and stop bits to distinguish
character patterns from idle line operation.

SYSTIMAX SCS

The physical or logical configuration of a telecommunications

system.

Transducer

Transport layer
Layer 4 of the OSI model. The transport layer provides for
end-to-end data relaying service across any type of data
network and is responsible for end-to-end reliability.

Twinaxial cable (TWINAX)

Brand name of SYSTIMAX Solutions structured cabling system.

Twinaxial cable is similar to coax except that the center of the

cable contains a twisted pair rather than a single conductor.

Telecommunications

Twisted pair(s)

A branch of technology concerned with the transmission,

emission and reception of signs, signals, writing, images and
sounds; that is, information of any nature by cable, radio,
optical or other electromagnetic systems.

A cable element which consists of two insulated conductors

twisted together in a determined fashion to form a balanced
transmission line.

Telecommunications closet

An electrically conducting cable comprising one or more pairs

none of which is shielded.

An enclosed space for housing telecommunications equipment,

cable terminations, and cross-connect cabling. The telecommunications closet is a recognized cross-connect point
between the backbone and horizontal cabling subsystems.

Unshielded twisted pair cable

UTP
See unshielded twisted pair cable.

291

Glossary

VCSEL
Vertical Cavity Surface Emitting Laser

Video conferencing
Real time communications via video between two or more
users at separate locations.

Wide area networks (WANS)

Networks that are linked across a large geographical area
generally using leased lines from a public operator.

Wireless LAN
Local area network that communicates using radio technology.

Work area
A building space where the occupants interact with
telecommunications terminal equipment. A users work area
which is typically 9 sq. meter or 100 sq. ft.
Glossary

Work area cable

A cable connecting the telecommunications outlet to the
terminal equipment.

292

Index
Material ID Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294
Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312

Index

293

Material ID Index
Material ID

Index

Page #

102579810 ........................... 65
102655495 ........................... 71
102689569 ........................... 68
102995073 ........................... 76
102995099 ........................... 76
103103701 ........................... 65
103184156 ........................ 261
103801239 ........................... 65
103801247 ........................... 65
103801254 ........................... 65
103895504 ........................... 65
104141858 ........................ 198
104141866 ........................ 194
104141874 ........................ 195
104386545 ........................... 79
104401865 ........................... 79
104405113 ........................... 68
104410147 ........................... 79
105034482 ........................ 194
105114581 ........................ 209
105276570 ........................ 198
105289656 ........................ 197
105289664 ........................ 197
105404776 ........................... 77
105483218 ........................ 194
105501050 ........................... 77
105514756 ........................... 79
105535926 ........................ 194
105564025 ........................... 77
105564033 ........................... 77
105564041 ........................... 77
105564058 ........................... 77
105564066 ........................... 77
105564074 ........................... 77
105564082 ........................... 77
105564090 ........................... 77
105581086 ........................... 79
105736482 ........................... 76
105736490 ........................... 76
106062524 ........................... 60
106266901 ........................ 194
106300098 ........................... 60
106300106 ........................... 60
106414170 ........................ 194
106497753 ........................ 194
106497761 ........................ 195
106622160 ........................ 240
106622178 ........................ 240
106622210 ........................ 240
106622251 ........................ 240
106622277 ........................ 240
106622285 ........................ 240

106627763 ........................ 240

106628852 ........................ 240
106650849 ........................ 245
106650864 ........................ 243
106650880 ........................ 243
106650898 ........................ 243
106657091 ........................... 65
106657109 ........................... 65
106657117 ........................... 65
106657133 ........................... 65
106657158 ........................... 65
106657166 ........................... 65
106657174 ........................... 65
106657182 ........................... 65
106657190 ........................... 65
106657216 ........................... 65
106657232 ........................... 65
106658149 ........................ 261
106658156 ........................ 261
106658164 ........................ 261
106664139 ........................ 246
106664147 ........................ 246
106664154 ........................ 246
106669278 ........................ 255
106688385 ........................ 240
106688393 ........................ 240
106688401 ........................ 240
106688419 ........................ 261
106697089 ........................ 246
106701154 ........................ 243
106720196 ........................ 247
106720204 ........................ 247
106720212 ........................ 247
106726706 ........................ 197
106726714 ........................ 197
106790132 ........................ 248
106790140 ........................ 248
106790165 ........................ 248
106824329 ........................... 60
106824378 ........................... 60
106824469 ........................... 60
106830573 ........................ 269
106830581 ........................ 269
106830615 ........................ 269
106830623 ........................ 269
106836943 ........................... 45
106836950 ........................... 45
106837222 ......73, 247, 252
106837230 ......73, 247, 252
106871809 ........................... 45
106871817 ........................... 45
106896947 ........................ 194
106926363 ........................... 46
106928765 ........................ 261

294

106939317 ........................... 46
106939325 ........................... 46
106939564 ........................ 194
106946809 ........................... 46
106946825 ........................... 46
106961311 ........................ 250
106961329 ........................ 250
106965379 ........................... 46
106965387 ........................... 46
106969066 ........................ 248
106974348 ........................... 46
106986110 ........................ 246
106999071 ........................... 45
107001687 ........................... 45
107025835 ........................ 198
107052326 ........................ 247
107052334 ........................ 247
107052359 ........................ 247
107057853 ........................... 45
107058802 ........................... 66
107058810 ........................... 66
107058828 ........................... 66
107058851 ........................... 66
107058869 ........................... 66
107058877 ........................... 66
107058901 ........................... 64
107058919 ........................... 64
107058927 ........................... 64
107058935 ........................... 64
107058943 ........................... 64
107058950 ........................... 64
107059891 ........................... 64
107059909 ........................... 64
107059917 ........................... 64
107059925 ........................... 64
107065583 ........................ 252
107067860 ........................ 252
107067928 ........................ 252
107067951 ........................ 252
107076192 ........................... 45
107078388 ........................... 60
107078396 ........................... 60
107078404 ........................... 60
107078412 ........................... 60
107091936 ........................... 45
107098816 ........................... 67
107132664 ........................ 269
107147787 ........................... 45
107151185 ........................... 68
107151193 ........................... 68
107167462 ........................ 245
107167488 ........................ 245
107167496 ........................ 242
107193435 ........................... 45

Material ID

Page #

107193468 ........................... 46
107213605 ........................... 72
107214405 ........................... 69
107222762 ........................... 53
107239485 ........................ 255
107239493 ........................ 255
107244022 ........................... 46
107244030 ........................... 46
107244048 ........................... 46
107244055 ........................... 46
107251696 ........................... 45
107256653 ........................... 64
107256661 ........................... 64
107256737 ........................... 60
107256745 ........................... 60
107256786 ........................... 60
107267452 ........................... 64
107272809 ........................... 46
107272841 ........................... 46
107273278 ........................... 46
107273286 ........................... 46
107276172 ........................ 236
107276180 ........................ 236
107287484 ........................... 53
107296352 ........................ 253
107296360 ........................ 253
107296378 ........................ 253
107296386 ........................ 253
107296394 ........................ 253
107296402 ........................ 253
107296410 ........................ 253
107296428 ........................ 253
107296436 ........................ 253
107296444 ........................ 253
107296451 ........................ 253
107296469 ........................ 253
107296477 ........................ 253
107296485 ........................ 253
107296493 ........................ 253
107296501 ........................ 253
107296519 ........................ 253
107296527 ........................ 253
107296535 ........................ 253
107296543 ........................ 253
107296550 ........................ 253
107296576 ........................ 253
107296584 ........................ 253
107296592 ........................ 253
107296600 ........................ 253
107296618 ........................ 253
107296626 ........................ 253
107296634 ........................ 253
107296642 ........................ 253
107296659 ........................ 253

107296667 ........................ 253

107296675 ........................ 253
107296683 ........................ 253
107296691 ........................ 253
107296709 ........................ 253
107296717 ........................ 254
107296725 ........................ 254
107296733 ........................ 254
107296741 ........................ 254
107296758 ........................ 254
107296766 ........................ 254
107296774 ........................ 254
107296782 ........................ 254
107296790 ........................ 254
107321697 ........................... 62
107321705 ........................... 62
107321713 ........................... 62
107321721 ........................... 62
107321739 ........................... 62
107321747 ........................... 62
107321754 ........................... 62
107321762 ........................... 62
107322133 ........................... 63
107322141 ........................... 63
107322158 ........................... 63
107322166 ........................... 63
107322174 ........................... 63
107322224 ........................... 63
107322240 ........................... 63
107323636 ........................... 45
107346744 ........................... 62
107346801 ........................... 63
107347080 ........................ 250
107369845 ........................... 53
107382525 ........................... 59
107383705 ........................... 46
107408551 ........................... 76
107428591 ........................... 50
107428609 ........................... 50
107431512 ........................ 261
107431520 ........................ 260
107431538 ........................ 260
107431546 ........................ 260
107431553 ........................ 260
107480022 ........................ 210
107487498 ........................... 56
107487514 ........................... 56
107509036 ........................... 46
107509051 ........................... 46
107526873 ........................... 61
107527111 ........................... 61
107527129 ........................... 61
107527285 ........................... 61
107527293 ........................... 61

295

107527301 ........................... 61
107527319 ........................... 61
107527327 ........................... 61
107527335 ........................... 61
107527343 ........................... 61
107527350 ........................... 61
107535072 ........................... 59
107535080 ........................... 59
107535585 ........................... 67
107535593 ........................... 67
107536773 ........................... 50
107536799 ........................... 50
107536815 ........................... 50
107536849 ........................... 50
107573537 ........................... 47
107573545 ........................... 47
107573560 ........................... 47
107611626 ........................... 64
107611634 ........................... 64
107638934 ........................... 50
107655169 ........................ 241
107655177 ........................ 241
107655185 ........................ 241
107655193 ........................ 241
107670952 ........................... 50
107754343 ........................... 54
107754350 ........................... 54
107754368 ........................... 54
107765992 ........................... 60
107766040 ........................... 60
107766057 ........................... 60
107782641 ........................ 207
107783755 ........................ 198
107800658 ........................ 255
107818320 ........................ 248
107818338 ........................ 248
107819146 ........................... 60
107819575 ........................... 45
107831133 ........................... 69
107831141 ........................... 69
107849283 ........................... 45
107860538 ........................... 47
107871477 ........................... 53
107894909 ........................... 78
107894917 ........................... 78
107894925 ........................... 78
107894941 ........................... 78
107894958 ........................... 78
107894966 ........................... 78
107920704 ........................... 69
107920712 ........................... 69
107920738 ........................... 69
107920746 ........................... 69
107920753 ........................... 69

Index

Material ID

Index

Page #

107920761 ........................... 69
107952442 ........................ 260
107952459 ........................ 260
107952467 ........................ 260
107952475 ........................ 260
107958233 ........................... 56
107975864 ........................... 71
107983983 ........................ 259
107984007 ........................ 259
107984015 ........................ 259
107984023 ........................ 259
107984031 ........................ 259
107984049 ........................ 259
107984056 ........................ 259
107984064 ........................ 259
107991143 ........................ 250
107992927 ........................ 255
107995011 ........................... 53
108004268 ........................ 255
108006198 ........................... 59
108006206 ........................... 59
108009408 ........................ 207
108009416 ........................ 207
108009424 ........................... 73
108009432 ........................... 73
108028457 ........................... 50
108035049 ........................ 261
108036690 ........................... 50
108036732 ........................... 56
108052879 ........................... 46
108062043 ........................... 71
108065657 ........................ 254
108065673 ........................ 254
108065707 ........................ 254
108065731 ........................ 254
108065756 ........................ 254
108065780 ........................ 254
108065806 ........................ 254
108065814 ........................ 254
108065822 ........................ 254
108066234 ........................ 254
108066242 ........................ 254
108066259 ........................ 254
108066267 ........................ 254
108066275 ........................ 254
108066283 ........................ 254
108066291 ........................ 254
108066309 ........................ 254
108066317 ........................ 254
108066325 ........................ 252
108066333 ........................ 252
108066341 ........................ 252
108066358 ........................ 252
108066457 ........................ 252

108066465 ........................ 252

108066473 ........................ 252
108066481 ........................ 252
108066499 ........................ 252
108086638 ........................ 250
108086646 ........................ 250
108116484 ........................... 50
108116492 ........................... 50
108116500 ........................... 50
108116518 ........................... 50
108116526 ........................... 50
108116534 ........................... 50
108116542 ........................... 50
108116559 ........................... 50
108120460 ........................... 72
108168451 ........................ 235
108168469 ........................ 235
108168477 ........................ 235
108168485 ........................ 235
108168493 ........................ 235
108168501 ........................ 235
108168519 ........................ 235
108168527 ........................ 235
108168535 ........................ 235
108168543 ........................ 235
108168550 ........................ 235
108168568 ........................ 235
108168576 ........................ 236
108168584 ........................ 236
108168592 ........................ 236
108168600 ........................ 236
108168774 ........................ 206
108168808 ........................ 206
108168824 ........................ 206
108173840 ........................... 45
108208919 ........................... 48
108208935 ........................... 48
108216128 ........................ 245
108216136 ........................ 245
108216144 ........................ 245
108216151 ........................ 245
108223181 ........................ 205
108224874 ........................... 75
108230632 ........................ 251
108232695 ........................... 51
108232703 ........................... 51
108232711 ........................... 51
108232729 ........................... 51
108232737 ........................... 51
108232745 ........................... 51
108232752 ........................... 51
108232760 ........................... 51
108232778 ........................... 51
108236126 ........................... 55

296

108236134 ........................... 55
108236142 ........................... 55
108236159 ........................... 55
108236167 ........................... 55
108258401 ........................ 235
108258419 ........................ 235
108258427 ........................ 235
108258435 ........................ 235
108258450 ........................ 235
108258468 ........................ 235
108259458 ........................ 198
108259466 ........................ 198
108265430 ........................ 240
108265448 ........................ 240
108265455 ........................ 240
108265463 ........................ 240
108267634 ........................... 50
108267642 ........................... 50
108314196 ........................ 199
108314204 ........................ 199
108314212 ........................ 199
108314220 ........................ 199
108314238 ........................ 199
108314279 ........................ 199
108314287 ........................ 199
108314295 ........................ 199
108314311 ........................ 199
108314329 ........................ 199
108314337 ........................ 199
108314345 ........................ 199
108314360 ........................... 78
108314378 ........................ 199
108320011 ........................... 50
108320029 ........................... 50
108320045 ........................... 50
108332982 ........................ 234
108332990 ........................ 234
108333006 ........................ 234
108333014 ........................ 234
108333022 ........................ 234
108333030 ........................ 234
108333048 ........................ 234
108333055 ........................ 234
108333063 ........................ 234
108333071 ........................ 234
108333089 ........................ 234
108333097 ........................ 234
108333105 ........................ 234
108333113 ........................ 234
108333121 ........................ 235
108333139 ........................ 235
108333147 ........................ 235
108333154 ........................ 235
108333162 ........................ 235

Material ID

Page #

108333170 ........................ 235

108333188 ........................ 235
108333196 ........................ 235
108333204 ........................ 235
108333212 ........................ 235
108333220 ........................ 235
108337692 ........................ 252
108337726 ........................... 51
108340829 ........................ 218
108356312 ........................... 59
108373515 ........................ 254
108373523 ........................ 254
108373531 ........................ 254
108373549 ........................ 254
108373564 ........................ 254
108373572 ........................ 254
108373580 ........................ 254
108373598 ........................ 254
108373606 ........................ 254
108373614 ........................ 254
108406414 ........................ 245
108406422 ........................ 245
108406430 ........................ 245
108406448 ........................ 245
108459488 ........................ 215
108480575 ........................... 62
108480609 ........................... 63
108480997 ........................ 252
108481003 ........................ 252
108481011 ........................ 254
108481029 ........................ 254
108482845 ........................ 257
108491697 ........................ 198
108492927 ........................ 236
108492935 ........................ 236
108492943 ........................ 236
108492950 ........................ 236
108502287 ........................ 239
108502295 ........................ 239
108502303 ........................ 239
108502329 ........................ 239
108502337 ........................ 239
108523937 ........................... 40
108527350 ........................ 266
108527351 ........................ 266
108527441 ........................ 264
108527450 ........................ 277
108527451 ........................ 277
108527466 ........................ 264
108527524 ........................ 270
108527540 ........................ 280
108527557 ........................ 270
108527560 ........................ 265
108527565 ........................ 270

108528118 ........................ 277

108528407 ........................... 40
108528415 ........................... 40
108528423 ........................... 40
108528431 ........................... 40
108528449 ........................... 40
108528456 ........................... 40
108528464 ........................... 40
108528472 ........................... 40
108528597 ........................... 40
108528647 ........................ 280
108528654 ........................ 280
108528662 ........................ 281
108528688 ........................ 280
108528696 ........................ 280
108528704 ........................ 280
108528795 ........................ 268
108528803 ........................ 269
108528811 ........................ 269
108528902 ........................ 280
108528910 ........................ 281
108528936 ........................ 281
108528951 ........................ 277
108538612 ........................... 40
108548868 ........................ 194
108548876 ........................ 194
108561135 ........................... 40
108561143 ........................... 40
108562174 ........................ 207
108564675 ........................ 243
108564683 ........................ 243
108564691 ........................ 243
108564709 ........................ 243
108564725 ........................ 243
108565557 ........................ 200
108565573 ........................ 200
108565581 ........................ 200
108565631 ........................ 197
108565649 ........................ 197
108565656 ........................ 197
108593203 ........................... 40
108606815 ........................... 46
108615188 ........................ 238
108615196 ........................ 238
108615204 ........................ 238
108615212 ........................ 238
108622887 ........................ 205
108622895 ........................ 205
108623109 ........................ 207
108626243 ........................ 206
108626250 ........................ 206
108626268 ........................ 206
108627266 ........................ 198
108627274 ........................ 198

297

108627282 ........................ 198

108634429 ........................... 40
108637612 ........................... 40
108637737 ........................... 40
108662131 ........................... 50
108671272 ........................... 47
108671280 ........................... 47
108680802 ........................... 27
108680810 ........................... 27
108680869 ........................... 27
108680877 ........................... 27
108680885 ........................... 27
108680893 ........................... 27
108681115 ........................... 27
108681131 ........................... 27
108681149 ........................... 27
108681156 ........................... 27
108681164 ........................... 29
108681172 ........................... 29
108681180 ........................... 29
108681198 ........................... 29
108681206 ........................... 29
108681214 ........................... 29
108681222 ........................... 29
108681230 ........................... 29
108681248 ........................... 29
108685009 ........................ 236
108685017 ........................ 236
108685025 ........................ 236
108685033 ........................ 236
108687658 ........................... 31
108687674 ........................... 31
108687682 ........................... 31
108687690 ........................... 31
108688946 ........................... 40
108689134 ........................... 60
108738113 ........................... 40
108744921 ........................... 27
108744939 ........................... 27
108744947 ........................... 27
108744954 ........................... 27
108836792 ........................... 40
108836834 ........................... 40
108867102 ........................ 277
108867151 ........................ 264
108867177 ........................ 280
108896564 ........................... 30
108924838 ........................... 46

405423260 ........................... 71
407732577 ........................... 71
407732585 ........................... 71
407742741 ........................... 71

Index

Material ID

Index

Page #

700001115 ........................ 208

700002132 ........................ 205
700002157 ..............209, 210
700002173 ........................ 205
700002181 ........................ 218
700002215 ........................ 205
700002223 ........................ 204
700002231 ........................ 204
700002330 ........................ 211
700002355 ..............205, 211
700002363 ........................ 204
700002389 ........................ 204
700002405 ..............215, 218
700004260 ........................ 201
700004278 ........................ 202
700004310 ........................ 203
700004328 ........................ 203
700004336 ........................ 203
700004583 ........................ 203
700004799 ........................ 205
700004807 ........................ 205
700004815 ........................ 205
700004864 ........................ 205
700004872 ........................ 205
700004880 ........................ 205
700004906 ........................ 205
700004914 ........................ 205
700005069 ........................ 197
700005135 ..............209, 211
700005143 ...208, 209, 210
700005309 ........................ 218
700005317 ........................ 217
700005358 ........................ 202
700005549 ........................ 204
700005556 ........................ 204
700005564 ..............208, 210
700005838 ..............201, 209
700005846 ........................ 211
700005853 ..............201, 211
700005887 ..............209, 211
700005895 ..............201, 211
700005929 ........................ 208
700005952 ........................ 210
700005960 ........................ 208
700006026 ........................ 208
700006109 ........................ 217
700006117 ........................ 215
700006125 ..............214, 215
700006166 ..............217, 218
700006240 .................................
........ 184, 186, 190, 192

700006257 .................................
........ 184, 186, 190, 192
700006281 .................................
........ 184, 186, 190, 192
700006299 ........................ 201
700006307 ........................ 201
700006364 ........................ 200
700006661 ..............217, 218
700006679 ..............217, 218
700006687 ..............217, 218
700006703 ..............217, 218
700006711 ........................ 218
700006737 ........................ 218
700006976 ........................ 202
700006984 ........................ 202
700006992 ........................ 201
700007008 ........................ 201
700007024 ........................ 202
700007214 ........................ 197
700007222 ........................ 197
700007230 ........................ 197
700007248 ........................ 197
700007255 ........................ 197
700007263 ........................ 197
700007271 ........................ 197
700007289 ........................ 197
700007420 ........................ 207
700007891 ........................ 206
700007909 ........................ 206
700007917 ........................ 206
700007966 ..............215, 218
700007974 ..............209, 211
700007982 ...215, 217, 218
700008022 ..............208, 209
700008048 ........................ 208
700008055 ........................ 208
700008063 ........................ 208
700008089 ........................ 217
700008105 ........................ 208
700008139 ..............208, 211
700008147 ........................ 211
700008154 ........................ 211
700008162 ..............208, 210
700008170 ..............209, 211
700008196 ........................ 211
700008204 ..............208, 210
700008212 ...208, 209, 210
700008220 ..............208, 210
700008261 ........................ 208
700008287 ..............208, 209
700008300 ........................ 215
700008360 ........................ 218
700008394 ..............217, 218
700008444 ........................ 136

298

700008444-SHOR ......... 138

700008451 ........................ 136
700008451-SHOR ......... 138
700008469 ........................ 136
700008469-SHOR ......... 138
700008477 ........................ 136
700008477-SHOR ......... 138
700008485 ........................ 136
700008485-SHOR ......... 138
700008519 ........................ 145
700008543 ........................ 145
700008998 ........................ 136
700008998-ARSL ........... 139
700008998-SRSL ............ 138
700009004 ........................ 135
700009004-APSL ........... 139
700009004-SPSL ............ 138
700009012 ........................ 136
700009012-SHOR ......... 138
700009087 ........................ 136
700009087-ARSL ........... 139
700009087-SRSL ............ 138
700009095 ........................ 135
700009095-APSL ........... 139
700009095-SPSL ............ 138
700009103 ........................ 136
700009103-SHOR ......... 138
700009178 ........................ 136
700009178-ARSL ........... 139
700009178-SRSL ............ 138
700009186 ........................ 135
700009186-APSL ........... 139
700009186-SPSL ............ 138
700009194 ........................ 136
700009194-SHOR ......... 138
700009269 ........................ 136
700009269-ARSL ........... 139
700009269-SRSL ............ 138
700009277 ........................ 135
700009277-APSL ........... 139
700009277-SPSL ............ 137
700009285 ........................ 135
700009285-APOR.......... 139
700009285-SPOR .......... 137
700009293 ........................ 136
700009293-SHOR ......... 138
700009301 ........................ 136
700009301-ARSL ........... 139
700009301-SRSL ............ 138
700009319 ........................ 135
700009319-APSL ........... 139
700009319-SPSL ............ 137
700009384 ........................ 136
700009384-ARSL ........... 139

Material ID

Page #

700009384-SRSL ............ 138

700009392 ........................ 135
700009392-APSL ........... 139
700009392-SPSL ............ 137
700009400 ........................ 135
700009400-APOR.......... 139
700009400-SPOR .......... 137
700009434 ........................ 136
700009434-ARSL ........... 139
700009434-SRSL ............ 138
700009442 ........................ 135
700009442-APSL ........... 139
700009442-SPSL ............ 137
700009509 ........................ 136
700009509-ARSL ........... 139
700009509-SRSL ............ 138
700009517 ........................ 135
700009517-APSL ........... 139
700009517-SPSL ............ 137
700009525 ........................ 135
700009525-APOR.......... 139
700009525-SPOR .......... 137
700009574 ........................ 136
700009574-ARSL ........... 139
700009574-SRSL ............ 138
700009582 ........................ 135
700009582-APSL ........... 139
700009582-SPSL ............ 137
700009590 ........................ 135
700009590-APOR.......... 139
700009590-SPOR .......... 137
700009640 ........................ 136
700009640-ARSL ........... 139
700009640-SRSL ............ 138
700009657 ........................ 135
700009657-APSL ........... 139
700009657-SPSL ............ 137
700009665 ........................ 135
700009665-APOR.......... 139
700009665-SPOR .......... 137
700009673 ........................... 94
700009673-APAQ .......... 101
700009673-SPAQ ............. 98
700009681 ........................... 96
700009681-AHAQ ........ 103
700009681-SHAQ ......... 100
700009699 ........................... 94
700009699-APAQ .......... 101
700009699-SPAQ ............. 98
700009707 ........................... 96
700009707-AHAQ ........ 103
700009707-SHAQ ......... 100
700009715 ........................... 95
700009715-APAQ .......... 101

700009715-SPAQ ............. 98
700009723 ........................... 96
700009723-AHAQ ........ 103
700009723-SHAQ ......... 100
700009731 ........................... 94
700009731-APAQ .......... 101
700009731-SPAQ ............. 98
700009749 ........................... 96
700009749-AHAQ ........ 103
700009749-SHAQ ......... 100
700009756 ........................... 95
700009756-APAQ .......... 101
700009756-SPAQ ............. 98
700009764 ........................... 96
700009764-AHAQ ........ 103
700009764-SHAQ ......... 100
700009772 ........................... 94
700009772-APAQ .......... 101
700009772-SPAQ ............. 98
700009780 ........................... 96
700009780-AHAQ ........ 103
700009780-SHAQ ......... 100
700009798 ........................... 95
700009798-APAQ .......... 101
700009798-SPAQ ............. 98
700009806 ........................... 96
700009806-AHAQ ........ 103
700009806-SHAQ ......... 100
700009814 ........................... 94
700009814-APAQ .......... 101
700009814-SPAQ ............. 98
700009822 ........................... 96
700009822-AHAQ ........ 103
700009822-SHAQ ......... 100
700009830 ........................... 95
700009830-APAQ .......... 101
700009830-SPAQ ............. 98
700009848 ........................... 96
700009848-AHAQ ........ 103
700009848-SHAQ ......... 100
700009855 ........................... 94
700009855-APAQ .......... 101
700009855-SPAQ ............. 98
700009863 ........................... 96
700009863-AHAQ ........ 103
700009863-SHAQ ......... 100
700009871 ........................... 95
700009871-APAQ .......... 101
700009871-SPAQ ............. 98
700009889 ........................... 96
700009889-AHAQ ........ 103
700009889-SHAQ ......... 100
700010119 ........................ 113
700010168 ........................ 136

299

700010168-AROR ......... 139

700010168-SROR .......... 138
700010176 ........................ 136
700010176-AROR ......... 139
700010176-SROR .......... 138
700010184 ........................ 136
700010184-AROR ......... 139
700010184-SROR .......... 138
700010390 ........................ 145
700010549 ........................ 142
700010556 ........................ 142
700010564 ........................ 142
700010572 ........................ 142
700010580 ........................ 142
700010598 ........................ 142
700010606 ........................ 142
700010614 ........................ 142
700010622 ........................ 142
700010630 ........................ 142
700010648 ........................ 142
700010655 ........................ 142
700010663 ........................ 142
700010671 ........................ 142
700010689 ........................ 142
700010697 ........................ 142
700010705 ........................ 142
700010713 ........................ 142
700010721 ........................ 142
700010739 ........................ 142
700010911 ........................ 218
700010952 ..............192, 198
700010960 ........................ 214
700011067 ........................ 203
700011109 ..............192, 198
700011125 ..............214, 215
700011133 ........................ 205
700011141 ..............217, 218
700011158 ........................ 209
700011166 ........................ 197
700011372 ........................ 201
700011398 ..............192, 198
700011406 ..............192, 198
700011414 ..............192, 198
700011422 ........................ 198
700011430 ........................ 198
700012172 ........................ 136
700012172-AROR ......... 139
700012172-SROR .......... 138
700012180 ........................ 136
700012180-AROR ......... 139
700012180-SROR .......... 138
700012347 ........................ 107
700012354 ........................ 107
700012362 ........................ 107

Index

Material ID

Index

Page #

700012370 ........................ 107

700012388 ........................ 107
700012990 ........................... 40
700013667 ........................... 46
700016462 ........................ 256
700016470 ........................ 256
700016488 ........................ 256
700016496 ........................ 256
700016504 ........................ 256
700016512 ........................ 256
700016520 ........................ 256
700016538 ........................ 256
700016553 ........................ 256
700019482 ........................ 256
700019490 ........................ 256
700019508 ........................ 256
700019516 ........................ 256
700022643 ........................... 45
700025513 ........................ 195
700025588 ........................ 197
700025653 ........................ 195
700025984 ........................ 198
700032766 ........................... 40
700071830 ........................ 201
700156177 ........................... 45
700162910 ........................ 198
700162936 ..............192, 198
700168966 ........................ 192
700173735 ........................... 36
700173743 ........................... 36
700173750 ........................... 33
700173768 ........................... 33
700173776 ........................... 36
700188923 ........................ 258
700188931 ........................ 257
700189046 ........................ 242
700191430 ........................ 144
700191448 ........................ 144
700191455 ........................ 144
700191463 ........................ 144
700191471 ........................ 144
700191489 ........................ 144
700191497 ........................ 144
700191505 ........................ 144
700191513 ........................ 144
700191570 ........................ 242
700191588 ........................ 242
700191596 ........................ 242
700201361 ........................... 32
700203052 ........................... 96
700203052-ARAQ ......... 102
700203052-SRAQ ............. 99
700203060 ........................... 96
700203060-ARAQ ......... 102

700203060-SRAQ ............. 99
700203078 ........................... 96
700203078-ARAQ ......... 102
700203078-SRAQ ............. 99
700203086 ........................... 96
700203086-ARAQ ......... 102
700203086-SRAQ ............. 99
700203094 ........................... 96
700203094-ARAQ ......... 102
700203094-SRAQ ............. 99
700203102 ........................... 96
700203102-ARAQ ......... 102
700203102-SRAQ ............. 99
700203110 ........................... 96
700203110-ARAQ ......... 102
700203110-SRAQ ............. 99
700203128 ........................... 96
700203128-ARAQ ......... 102
700203128-SRAQ ............. 99
700205560 ........................ 113
700205578 ........................ 113
700205586 ........................... 95
700205586-APAQ .......... 101
700205586-SPAQ ............. 98
700206667 ........................... 37
700206675 ........................... 37
700206683 ........................... 37
700206691 ........................... 37
700206709 ........................... 37
700206717 ........................... 37
700206725 ........................... 37
700206733 ........................... 37
700206741 ........................... 37
700206758 ........................... 37
700206949 ........................ 206
700206956 ........................ 206
700206964 ........................ 206
700206972 ........................ 206
700206980 ........................ 206
700206998 ........................ 206
700207004 ........................ 206
700207012 ........................ 206
700207020 ........................ 206
700207871 ........................... 46
700207889 ........................... 46
700207897 ........................... 46
700208093 ........................... 28
700208101 ........................... 28
700208127 ........................... 95
700208127-ARAQ ......... 102
700208127-SRAQ ............. 99
700208135 ........................... 95
700208135-ARAQ ......... 102
700208135-SRAQ ............. 99

300

700208143 ........................... 95
700208143-ARAQ ......... 102
700208143-SRAQ ............. 99
700208150 ........................... 95
700208150-ARAQ ......... 102
700208150-SRAQ ............. 99
700208168 ........................... 95
700208168-ARAQ ......... 102
700208168-SRAQ ............. 99
700208176 ........................... 95
700208176-ARAQ ......... 102
700208176-SRAQ ............. 99
700208218 ........................... 95
700208218-ARAQ ......... 102
700208218-SRAQ ............. 99
700208226 ........................... 95
700208226-ARAQ ......... 102
700208226-SRAQ ............. 99
700208754 ........................ 198
700208762 ........................ 198
700209653 ........................ 198
700210008 ........................... 28
700210024 ........................... 28
700210032 ........................... 28
700210073 ........................... 28
700210081 ........................... 28
700210115 ........................... 28
700210123 ........................... 28
700210131 ........................... 28
700210156 ........................... 28
700210164 ........................... 28
700210180 ........................... 28
700210198 ........................... 28
700210206 ........................... 28
700210214 ........................... 28
700210222 ........................... 28
700210230 ........................... 28
700210248 ........................... 28
700210263 ........................... 28
700210982 ........................ 112
700210990 ........................ 112
700211006 ........................ 112
700211014 ........................ 112
700211022 ........................ 112
700211030 ........................ 112
700211089 ........................... 96
700211089-AHAQ ........ 103
700211089-SHAQ ......... 100
700211097 ........................... 96
700211097-AHAQ ........ 103
700211097-SHAQ ......... 100
700211105 ........................... 95
700211105-APAQ .......... 101
700211105-SPAQ ............. 98

Material ID

Page #

700211113 ........................... 95
700211113-APAQ .......... 101
700211113-SPAQ ............. 98
700211121 ........................... 96
700211121-AHAQ ........ 103
700211121-SHAQ ......... 100
700211139 ........................... 96
700211139-AHAQ ........ 103
700211139-SHAQ ......... 100
700211147 ........................... 94
700211147-APAQ .......... 101
700211147-SPAQ ............. 98
700211154 ........................... 94
700211154-APAQ .......... 101
700211154-SPAQ ............. 98
700211279 ........................ 145
700211287 ........................ 145
700211295 ........................ 145
700211394 ........................... 60
700211923 ........................... 26
700211931 ........................... 26
700211956 ........................... 26
700211964 ........................... 26
700211980 ........................... 26
700211998 ........................... 26
700212012 ........................... 26
700212020 ........................... 26
700212046 ........................... 26
700212053 ........................... 26
700212061 ........................... 26
700212087 ........................... 26
700212095 ........................... 26
700212103 ........................... 26
700212111 ........................... 26
700212129 ........................... 26
700212137 ........................... 34
700213028 ........................ 223
700213036 ........................ 223
700214208 ........................... 26
700214216 ........................... 27
700214372 ........................... 28
700216443 ........................... 30
700216450 ........................... 30
700216476 ........................... 30
700216484 ........................... 30
700216492 ........................... 30
700217045 ........................ 197
700218035 ........................ 216
700218043 ........................ 216
700218050 ........................ 216
700218068 ........................ 216
700218076 ........................ 216
700218084 ........................ 216
700219116 ........................ 107

700225790 ........................ 197

700229511 ........................... 96
700229511-AHAQ ........ 103
700229511-SHAQ ......... 100
700233000 ........................ 197
700233638 ........................ 216
760000638 ........................ 205
760000810 ........................ 216
760001404 ........................... 33
760001412 ........................... 48
760001420 ........................... 48
760001669 ........................... 36
760001677 ........................... 36
760001685 ........................... 36
760001693 ........................... 36
760001701 ........................... 36
760001719 ........................... 36
760001727 ........................... 36
760001735 ........................... 36
760001743 ........................... 36
760001750 ........................... 36
760001768 ........................... 36
760001776 ........................... 34
760001784 ........................... 34
760001792 ........................... 34
760001800 ........................... 34
760001818 ........................... 34
760001826 ........................... 34
760001834 ........................... 34
760001842 ........................... 34
760001859 ........................... 34
760001867 ........................... 34
760001875 ........................... 34
760002170 ........................ 113
760002188 ........................ 113
760002196 ........................ 113
760002253 ........................ 125
760002261 ........................ 125
760002279 ........................ 125
760002287 ........................ 125
760002295 ........................ 125
760002303 ........................ 125
760002311 ........................ 125
760002329 ........................ 125
760002337 ........................ 125
760002345 ........................ 125
760002352 ........................ 125
760002360 ........................ 141
760002378 ........................ 141
760002386 ........................ 141
760002394 ........................ 141
760002402 ........................ 141
760002410 ........................ 141
760002428 ........................ 141

301

760002436 ........................ 141

760002444 ........................ 141
760002451 ........................ 141
760002469 ........................ 106
760002477 ........................ 106
760002485 ........................ 106
760002493 ........................ 106
760002501 ........................ 106
760002519 ........................ 106
760002527 ........................ 106
760002535 ........................ 106
760002543 ........................ 106
760002550 ........................ 106
760002568 ........................ 106
760002576 ........................ 124
760002584 ........................ 124
760002592 ........................ 124
760002600 ........................ 124
760002618 ........................ 124
760002626 ........................ 124
760002634 ........................ 124
760002642 ........................ 124
760002659 ........................ 124
760002667 ........................ 124
760002675 ........................ 124
760002683 ........................ 140
760002691 ........................ 140
760002709 ........................ 140
760002717 ........................ 140
760002725 ........................ 140
760002733 ........................ 140
760002741 ........................ 140
760002758 ........................ 140
760002766 ........................ 140
760002774 ........................ 140
760002782 ........................ 105
760002790 ........................ 105
760002808 ........................ 105
760002816 ........................ 105
760002824 ........................ 105
760002832 ........................ 105
760002840 ........................ 105
760002857 ........................ 105
760002865 ........................ 105
760002873 ........................ 105
760002881 ........................ 105
760003038 ........................ 251
760003210 ........................... 53
760003228 ........................... 28
760003236 ........................... 46
760003913 ........................ 127
760003921 ........................ 127
760003939 ........................ 127
760003947 ........................ 127

Index

Material ID

Index

Page #

760003954 ........................ 127

760003962 ........................ 127
760003970 ........................ 127
760003988 ........................ 127
760003996 ........................ 127
760004002 ........................ 126
760004010 ........................ 126
760004028 ........................ 126
760004036 ........................ 126
760004044 ........................ 126
760004051 ........................ 126
760004069 ........................ 126
760004077 ........................ 126
760004085 ........................ 126
760004093 ........................ 128
760004101 ........................ 128
760004119 ........................ 128
760004127 ........................ 128
760004135 ........................ 128
760004143 ........................ 128
760004150 ........................ 128
760004168 ........................ 128
760004176 ........................ 128
760004184 ........................ 130
760004192 ........................ 130
760004200 ........................ 130
760004218 ........................ 130
760004226 ........................ 130
760004234 ........................ 130
760004242 ........................ 120
760004242-AHYL .......... 123
760004242-SHYL ........... 122
760004259 ........................ 120
760004259-AHYL .......... 123
760004259-SHYL ........... 122
760004267 ........................ 120
760004267-AHYL .......... 123
760004267-SHYL ........... 122
760004275 ........................ 120
760004275-AHYL .......... 123
760004275-SHYL ........... 122
760004283 ........................ 120
760004283-AHYL .......... 123
760004283-SHYL ........... 122
760004291 ........................ 120
760004291-AHYL .......... 123
760004291-SHYL ........... 122
760004309 ........................ 120
760004309-AHYL .......... 123
760004309-SHYL ........... 122
760004317 ........................ 119
760004317-APYL ........... 122
760004317-SPYL............ 121
760004325 ........................ 119

760004325-APYL ........... 122

760004325-SPYL............ 121
760004333 ........................ 119
760004333-APYL ........... 122
760004333-SPYL............ 121
760004341 ........................ 119
760004341-APYL ........... 122
760004341-SPYL............ 121
760004358 ........................ 119
760004358-APYL ........... 122
760004358-SPYL............ 121
760004366 ........................ 119
760004366-APYL ........... 122
760004366-SPYL............ 121
760004374 ........................ 119
760004374-APYL ........... 122
760004374-SPYL............ 121
760004382 ........................ 119
760004382-APYL ........... 122
760004382-SPYL............ 121
760004390 ........................ 119
760004390-APYL ........... 122
760004390-SPYL............ 121
760004408 ........................ 120
760004408-ARYL ........... 123
760004408-SRYL............ 122
760004416 ........................ 120
760004416-ARYL ........... 123
760004416-SRYL............ 122
760004424 ........................ 120
760004424-ARYL ........... 123
760004424-SRYL............ 122
760004432 ........................ 120
760004432-ARYL ........... 123
760004432-SRYL............ 122
760004440 ........................ 120
760004440-ARYL ........... 123
760004440-SRYL............ 122
760004457 ........................ 120
760004457-ARYL ........... 123
760004457-SRYL............ 122
760004465 ........................ 120
760004465-ARYL ........... 123
760004465-SRYL............ 122
760004473 ........................ 120
760004473-ARYL ........... 123
760004473-SRYL............ 122
760004481 ........................ 120
760004481-ARYL ........... 123
760004481-SRYL............ 122
760004671 ........................... 45
760004689 ........................... 26
760004697 ........................... 26
760004705 ........................... 45

302

760005132 ........................ 202

760005165 ........................ 145
760005256 ........................... 74
760005264 ........................... 74
760005272 ........................... 74
760005280 ........................... 74
760005298 ........................... 74
760005306 ........................... 74
760005314 ........................... 74
760005322 ........................... 74
760005330 ........................... 74
760005348 ........................... 74
760005355 ........................... 74
760005363 ........................... 74
760005371 ........................... 74
760005389 ........................... 74
760005397 ........................... 74
760005405 ........................... 74
760005413 ........................... 74
760005421 ........................... 74
760005439 ........................... 74
760005447 ........................... 74
760005454 ........................... 74
760005462 ........................... 74
760005470 ........................... 74
760005488 ........................... 74
760005595 ........................ 223
760005629 ........................ 223
760006197 ........................ 198
760006205 ........................ 218
760006346 ........................... 30
760006353 ........................... 30
760006395 ........................ 257
760006411 ........................... 94
760006411-APAQ .......... 101
760006411-SPAQ ............. 97
760006593 ........................... 46
760006650 ........................ 112
760007047 ........................ 202
760007054 ........................ 202
760007062 ........................ 202
760007088 ........................ 202
760007096 ........................ 202
760007104 ........................ 202
760007112 ........................ 202
760007245 ........................ 105
760007252 ........................ 105
760007260 ........................ 105
760007278 ........................ 105
760007286 ........................ 105
760007294 ........................ 105
760007302 ........................ 105
760007310 ........................ 105
760007328 ........................ 105

Material ID

Page #

760007336 ........................ 105

760007344 ........................ 105
760007351 ........................ 104
760007369 ........................ 104
760007377 ........................ 104
760007385 ........................ 104
760007393 ........................ 104
760007401 ........................ 104
760007419 ........................ 104
760007427 ........................ 104
760007435 ........................ 104
760007443 ........................ 104
760007450 ........................ 104
760007476 ........................ 112
760007484 ........................ 112
760007492 ........................ 113
760007500 ........................ 113
760007518 ........................ 113
760007534 ........................ 157
760007534-ARSL ........... 160
760007534-SRSL ............ 159
760007559 ........................ 157
760007559-ARSL ........... 160
760007559-SRSL ............ 159
760007567 ........................ 157
760007567-ARSL ........... 160
760007567-SRSL ............ 159
760007575 ........................ 157
760007575-ARSL ........... 160
760007575-SRSL ............ 159
760007583 ........................ 157
760007583-ARSL ........... 160
760007583-SRSL ............ 159
760007591 ........................ 157
760007591-ARSL ........... 160
760007591-SRSL ............ 159
760007609 ........................ 157
760007609-ARSL ........... 160
760007609-SRSL ............ 159
760007617 ........................ 157
760007617-ARSL ........... 160
760007617-SRSL ............ 159
760007625 ........................ 157
760007625-ARSL ........... 160
760007625-SRSL ............ 159
760007641 ........................ 157
760007641-ARSL ........... 160
760007641-SRSL ............ 159
760007666 ........................ 157
760007666-ARSL ........... 160
760007666-SRSL ............ 159
760007674 ........................ 157
760007674-ARSL ........... 160
760007674-SRSL ............ 159

760007682 ........................ 157

760007682-ARSL ........... 160
760007682-SRSL ............ 159
760007690 ........................ 157
760007690-ARSL ........... 160
760007690-SRSL ............ 159
760007708 ........................ 157
760007708-ARSL ........... 160
760007708-SRSL ............ 159
760007716 ........................ 156
760007716-APSL ........... 160
760007716-SPSL ............ 158
760007724 ........................ 156
760007724-APSL ........... 160
760007724-SPSL ............ 158
760007732 ........................ 156
760007732-APSL ........... 160
760007732-SPSL ............ 158
760007740 ........................ 156
760007740-APSL ........... 160
760007740-SPSL ............ 158
760007757 ........................ 156
760007757-APSL ........... 160
760007757-SPSL ............ 158
760007765 ........................ 156
760007765-APSL ........... 160
760007765-SPSL ............ 158
760007773 ........................ 156
760007773-APSL ........... 160
760007773-SPSL ............ 158
760007781 ........................ 156
760007781-APSL ........... 160
760007781-SPSL ............ 158
760007799 ........................ 156
760007799-APSL ........... 160
760007799-SPSL ............ 158
760007815 ........................ 156
760007815-APSL ........... 160
760007815-SPSL ............ 158
760007831 ........................ 156
760007831-APSL ........... 160
760007831-SPSL ............ 158
760007849 ........................ 156
760007849-APSL ........... 160
760007849-SPSL ............ 158
760007856 ........................ 156
760007856-APSL ........... 160
760007856-SPSL ............ 158
760007864 ........................ 156
760007864-APSL ........... 160
760007864-SPSL ............ 158
760007872 ........................ 156
760007872-APSL ........... 160
760007872-SPSL ............ 158

303

760007880 ........................ 156

760007880-APSL ........... 160
760007880-SPSL ............ 158
760007898 ........................ 149
760007898-ARAQ ......... 154
760007898-SRAQ .......... 152
760007906 ........................ 149
760007906-ARAQ ......... 154
760007906-SRAQ .......... 152
760007914 ........................ 149
760007914-ARAQ ......... 154
760007914-SRAQ .......... 152
760007922 ........................ 149
760007922-ARAQ ......... 154
760007922-SRAQ .......... 152
760007930 ........................ 149
760007930-ARAQ ......... 154
760007930-SRAQ .......... 152
760007948 ........................ 149
760007948-ARAQ ......... 154
760007948-SRAQ .......... 152
760007955 ........................ 149
760007955-ARAQ ......... 154
760007955-SRAQ .......... 152
760007963 ........................ 149
760007963-ARAQ ......... 154
760007963-SRAQ .......... 152
760007971 ........................ 149
760007971-ARAQ ......... 154
760007971-SRAQ .......... 152
760007997 ........................ 149
760007997-ARAQ ......... 154
760007997-SRAQ .......... 152
760008011 ........................ 149
760008011-ARAQ ......... 154
760008011-SRAQ .......... 152
760008029 ........................ 149
760008029-ARAQ ......... 154
760008029-SRAQ .......... 152
760008037 ........................ 149
760008037-ARAQ ......... 154
760008037-SRAQ .......... 152
760008045 ........................ 149
760008045-ARAQ ......... 154
760008045-SRAQ .......... 152
760008052 ........................ 149
760008052-ARAQ ......... 154
760008052-SRAQ .......... 152
760008060 ........................ 149
760008060-ARAQ ......... 154
760008060-SRAQ .......... 152
760008078 ........................ 148
760008078-APAQ .......... 153
760008078-SPAQ .......... 151

Index

Material ID

Index

Page #

760008086 ........................ 148

760008086-APAQ .......... 153
760008086-SPAQ .......... 151
760008094 ........................ 148
760008094-APAQ .......... 153
760008094-SPAQ .......... 151
760008102 ........................ 148
760008102-APAQ .......... 153
760008102-SPAQ .......... 151
760008110 ........................ 148
760008110-APAQ .......... 153
760008110-SPAQ .......... 151
760008128 ........................ 148
760008128-APAQ .......... 153
760008128-SPAQ .......... 151
760008136 ........................ 148
760008136-APAQ .......... 153
760008136-SPAQ .......... 151
760008144 ........................ 148
760008144-APAQ .......... 153
760008144-SPAQ .......... 151
760008151 ........................ 148
760008151-APAQ .......... 153
760008151-SPAQ .......... 151
760008177 ........................ 148
760008177-APAQ .......... 153
760008177-SPAQ .......... 151
760008193 ........................ 148
760008193-APAQ .......... 153
760008193-SPAQ .......... 151
760008201 ........................ 148
760008201-APAQ .......... 153
760008201-SPAQ .......... 152
760008219 ........................ 148
760008219-APAQ .......... 153
760008219-SPAQ .......... 152
760008227 ........................ 149
760008227-APAQ .......... 153
760008227-SPAQ .......... 152
760008235 ........................ 149
760008235-APAQ .......... 153
760008235-SPAQ .......... 152
760008243 ........................ 149
760008243-SPAQ .......... 152
760008250 ........................ 166
760008268 ........................ 166
760008276 ........................ 166
760008284 ........................ 166
760008292 ........................ 166
760008300 ........................ 166
760008318 ........................ 164
760008326 ........................ 164
760008334 ........................ 164
760008342 ........................ 164

760008359 ........................ 164

760008367 ........................ 164
760008375 ........................ 171
760008383 ........................ 171
760008391 ........................ 171
760008409 ........................ 171
760008417 ........................ 171
760008425 ........................ 171
760008433 ........................ 168
760008441 ........................ 168
760008458 ........................ 168
760008466 ........................ 168
760008474 ........................ 168
760008482 ........................ 168
760008490 ........................ 165
760008508 ........................... 94
760008508-APAQ .......... 101
760008508-SPAQ ............. 98
760008516 ........................... 95
760008516-ARAQ ......... 102
760008516-SRAQ ............. 99
760008607 ........................ 237
760008615 ........................ 237
760008623 ........................ 237
760008631 ........................ 237
760008649 ........................ 237
760008656 ........................ 237
760008664 ........................ 237
760008672 ........................ 237
760008698 ........................... 95
760008698-APAQ .......... 101
760008698-SPAQ ............. 98
760008706 ........................... 96
760008706-ARAQ ......... 102
760008706-SRAQ ............. 99
760008722 ........................ 162
760008888 ........................... 32
760009001 ........................ 157
760009001-AHOR ......... 161
760009001-SHOR ......... 159
760009019 ........................ 157
760009019-AHOR ......... 161
760009019-SHOR ......... 159
760009027 ........................ 157
760009027-AHOR ......... 161
760009027-SHOR ......... 159
760009035 ........................ 157
760009035-AHOR ......... 161
760009035-SHOR ......... 159
760009043 ........................ 157
760009043-AHOR ......... 161
760009043-SHOR ......... 159
760009050 ........................ 157
760009050-AHOR ......... 161

304

760009050-SHOR ......... 159

760009068 ........................ 157
760009068-AHOR ......... 161
760009068-SHOR ......... 159
760009076 ........................ 157
760009076-AHOR ......... 161
760009076-SHOR ......... 159
760009084 ........................ 157
760009084-AHOR ......... 161
760009084-SHOR ......... 159
760009100 ........................ 157
760009100-AHOR ......... 161
760009100-SHOR ......... 159
760009126 ........................ 157
760009126-AHOR ......... 161
760009126-SHOR ......... 159
760009134 ........................ 157
760009134-AHOR ......... 161
760009134-SHOR ......... 159
760009142 ........................ 157
760009142-AHOR ......... 161
760009142-SHOR ......... 159
760009159 ........................ 157
760009159-AHOR ......... 161
760009159-SHOR ......... 159
760009167 ........................ 157
760009167-AHOR ......... 161
760009167-SHOR ......... 159
760009175 ........................ 157
760009175-AHOR ......... 161
760009175-SHOR ......... 159
760009183 ........................ 150
760009183-AHAQ ........ 155
760009183-SHAQ ......... 153
760009191 ........................ 150
760009191-AHAQ ........ 155
760009191-SHAQ ......... 153
760009209 ........................ 150
760009209-AHAQ ........ 155
760009209-SHAQ ......... 153
760009217 ........................ 150
760009217-AHAQ ........ 155
760009217-SHAQ ......... 153
760009225 ........................ 150
760009225-AHAQ ........ 155
760009225-SHAQ ......... 153
760009233 ........................ 150
760009233-AHAQ ........ 155
760009233-SHAQ ......... 153
760009241 ........................ 150
760009241-AHAQ ........ 155
760009241-SHAQ ......... 153
760009258 ........................ 150
760009258-AHAQ ........ 155

Material ID

Page #

760009258-SHAQ ......... 153

760009266 ........................ 150
760009266-AHAQ ........ 155
760009266-SHAQ ......... 153
760009282 ........................ 150
760009282-AHAQ ........ 155
760009282-SHAQ ......... 153
760009308 ........................ 150
760009308-AHAQ ........ 155
760009308-SHAQ ......... 153
760009316 ........................ 150
760009316-AHAQ ........ 155
760009316-SHAQ ......... 153
760009324 ........................ 150
760009324-AHAQ ........ 155
760009324-SHAQ ......... 153
760009332 ........................ 150
760009332-AHAQ ........ 155
760009332-SHAQ ......... 153
760009340 ........................ 150
760009340-AHAQ ........ 155
760009340-SHAQ ......... 153
760009357 ........................ 150
760009357-AHAQ ........ 155
760009357-SHAQ ......... 153
760009423 ........................ 237
760009431 ........................ 237
760009449 ........................ 237
760009456 ........................ 237
760009464 ........................ 237
760009472 ........................ 237
760009480 ........................ 237
760009498 ........................ 237
760009753 ........................ 130
760010009 ........................ 237
760010017 ........................ 237
760010025 ........................ 237
760010033 ........................ 237
760010090 ........................ 207
760010132 ........................... 94
760010132-APAQ .......... 101
760010132-SPAQ ............. 98
760010140 ........................ 166
760010199 ........................ 198
760010207 ........................ 197
760010371 ........................ 112
760010777 ........................ 223
760010785 ........................ 223
760010900 ........................... 61
760010918 ........................... 61
760011049 ........................ 130
760011544 ........................... 30
760011593 ........................ 251
760011841 ........................... 28

760011858 ........................... 26
760011916 ........................ 251
760012005 ........................ 113
760012013 ........................ 113
760012104 ........................... 95
760012104-ARAQ ......... 102
760012104-SRAQ ............. 98
760012112 ........................... 95
760012112-ARAQ ......... 102
760012112-SRAQ ............. 98
760012120 ........................... 95
760012120-ARAQ ......... 102
760012120-SRAQ ............. 98
760012138 ........................... 94
760012138-APAQ .......... 101
760012138-SPAQ ............. 97
760012146 ........................... 94
760012146-APAQ .......... 101
760012146-SPAQ ............. 97
760012153 ........................... 96
760012153-AHAQ ........ 103
760012153-SHAQ ......... 100
760012161 ........................... 96
760012161-AHAQ ........ 103
760012161-SHAQ ......... 100
760012179 ........................... 96
760012179-AHAQ ........ 103
760012179-SHAQ ......... 100
760012229 ........................ 128
760012385 ........................ 109
760012393 ........................ 128
760013094 ........................ 238
760013102 ........................ 238
760013110 ........................ 238
760013128 ........................ 238
760013458 ........................ 175
760013722 ........................ 175
760014837 ........................ 108
760015289 ........................ 113
760015412 ........................ 175
760015602 ........................ 109
760015610 ........................ 109
760015628 ........................ 109
760015800 ........................ 107
760016063 ..............175, 192
760016519 ........................... 32
760016550 ........................ 128
760016568 ........................ 128
760016576 ........................ 128
760016584 ........................ 128
760016626 ........................ 143
760016634 ........................ 143
760016642 ........................ 143
760016659 ........................ 143

305

760016667 ........................ 143

760016675 ........................ 143
760016717 ........................ 109
760016725 ........................ 109
760016733 ........................ 109
760016741 ........................ 109
760016758 ........................ 109
760016766 ........................ 109
760016808 ........................ 109
760016816 ........................ 109
760016824 ........................ 109
760016832 ........................ 109
760016873 ........................ 108
760016881 ........................ 108
760016899 ........................ 108
760016907 ........................ 108
760016915 ........................ 108
760016956 ........................ 170
760016964 ........................ 170
760016972 ........................ 170
760016980 ........................ 170
760016998 ........................ 170
760017004 ........................ 170
760017020 ..............109, 168
760017038 ........................ 168
760017046 ........................ 168
760017053 ........................ 168
760017061 ........................ 168
760017079 ........................ 168
760017095 ........................ 168
760017103 ........................ 168
760017111 ........................ 168
760017137 ........................ 167
760017145 ........................ 167
760017152 ........................ 167
760017160 ........................ 167
760017178 ........................ 167
760017186 ........................ 167
760017202 ........................ 107
760017541 ........................ 238
760017558 ........................ 238
760017566 ........................ 238
760017574 ........................ 238
760017616 ........................ 157
760017616-ARSL ........... 160
760017616-SRSL ............ 159
760017848 ........................ 223
760017855 ........................ 223
760017939 ........................ 125
760017947 ........................ 125
760017954 ........................ 125
760018051 ........................ 119
760018051-APYL ........... 122
760018051-SPYL............ 121

Index

Material ID

Index

Page #

760018069 ........................... 34
760018390 ........................ 149
760018390-ARAQ ......... 154
760018390-SRAQ .......... 152
760018408 ........................ 149
760018408-ARAQ ......... 154
760018408-SRAQ .......... 152
760018457 ........................ 162
760018515 ........................ 120
760018515-ARYL ........... 123
760018515-SRYL............ 122
760018523 ........................ 136
760018523-ARSL ........... 139
760018523-SRSL ............ 138
760018531 ........................ 136
760018531-ARSL ........... 139
760018531-SRSL ............ 138
760018549 ........................... 96
760018549-SRAQ ............. 99
760018556 ........................... 95
760018564 ........................... 95
760018572 ........................ 157
760018572-ARSL ........... 160
760018572-SRSL ............ 159
760018580 ........................ 157
760018580-ARSL ........... 160
760018580-SRSL ............ 159
760018598 ........................ 157
760018598-ARSL ........... 160
760018598-SRSL ............ 159
760018606 ........................ 149
760018606-ARAQ ......... 154
760018614 ........................ 149
760018614-ARAQ ......... 154
760018614-SRAQ .......... 152
760018622 ........................ 149
760018622-ARAQ ......... 154
760018622-SRAQ .......... 152
760018630 ........................ 119
760018630-APYL ........... 122
760018630-SPYL............ 121
760018648 ........................ 135
760018648-APSL ........... 139
760018648-SPSL ............ 137
760018655 ........................ 135
760018655-APOR.......... 139
760018655-SPOR .......... 137
760018663-APSL ........... 139
760018663-SPSL ............ 137
760018671 ........................... 95
760018671-APAQ .......... 101
760018671-SPAQ ............. 98
760018689 ........................... 94
760018689-APAQ .......... 101

760018689-SPAQ ............. 98
760018697 ........................... 94
760018697-APAQ .......... 101
760018705 ........................ 156
760018705-APAQ .......... 160
760018705-SPAQ .......... 158
760018713 ........................ 156
760018713-APSL ........... 160
760018713-SPSL ............ 158
760018721 ........................ 156
760018721-APSL ........... 160
760018721-SPSL ............ 158
760018739 ........................ 148
760018739-APAQ .......... 153
760018739-SPAQ .......... 151
760018747 ........................ 148
760018747-APAQ .......... 153
760018747-SPAQ .......... 151
760018754 ........................ 148
760018754-APAQ .......... 153
760018754-SPAQ .......... 151
760018770 ........................ 149
760018770-APAQ .......... 154
760018770-SPAQ .......... 152
760018788 ........................ 149
760018788-APAQ .......... 154
760018788-SPAQ .......... 152
760018820 ........................ 214
760018838 ........................ 214
760018861 ........................... 95
760018879 ........................... 94
760018879-APAQ .......... 101
760018879-SPAQ ............. 98
760018887 ........................ 120
760018887-ARYL ........... 123
760018887-SRYL............ 122
760018895 ........................ 119
760018895-APYL ........... 122
760018895-SPYL............ 121
760019075-AHYL .......... 123
760019075-SHYL ........... 122
760019083-SHOR ......... 138
760019091-AHAQ ........ 103
760019091-SHAQ ......... 100
760019109-AHAQ ........ 103
760019117-SHAQ ......... 100
760019125-AHOR ......... 161
760019125-SHOR ......... 159
760019133-AHOR ......... 161
760019133-SHOR ......... 159
760019141-AHOR ......... 161
760019141-SHOR ......... 159
760019158 ........................ 149
760019158-APAQ .......... 154

306

760019158-SPAQ .......... 152

760019166 ........................ 149
760019166-ARAQ ......... 154
760019166-SRAQ .......... 152
760019174-AHAQ ........ 155
760019174-SHAQ ......... 153
760019182-AHAQ ........ 155
760019182-SHAQ ......... 153
760019190-AHAQ ........ 155
760019190-SHAQ ......... 153
760019554 ........................ 202
760019562 ........................ 202
760019612 ........................ 112
760019620 ........................... 95
760019620-APAQ .......... 101
760019620-SPAQ ............. 98
760021683 ........................... 15
760021691 ........................... 94
760021709 ........................... 15
760021717 ........................... 15
760021725 ........................... 15
760021733 ........................... 15
760021758 ........................ 107
760021790 ........................ 192
760021832 ........................ 192
760023200 ........................ 186
760023226 ........................... 17
760023234 ........................... 17
760023242 ........................... 17
760023275 ........................... 17
760023556 ........................... 20
760023564 ........................... 20
760023572 ........................... 20
760023580 ........................... 20
760023598 ........................... 20
760023606 ........................... 20
760023614 ........................... 20
760023622 ........................... 20
760023630 ........................... 20
760023648 ........................... 20
760023655 ........................... 20
760024190 ........................... 16
760024208 ........................... 16
760024216 ........................... 16
760024224 ........................... 16
760024232 ........................... 16
760024372 ........................ 192
760024380 ........................ 192
760024547 ........................... 94
760024547-APAQ .......... 101
760024547-SPAQ ............. 97
760024554 ........................... 94
760024554-APAQ .......... 101
760024554-SPAQ ............. 97

Material ID

Page #

760024562 ........................... 94
760024562-APAQ .......... 101
760024562-SPAQ ............. 97
760024588 ........................ 223
760024810 ........................... 96
760024810-ARAQ ......... 102
760024810-SRAQ ............. 99
760024836 ........................... 95
760024836-APAQ .......... 101
760024836-SPAQ ............. 98
760024851 ........................ 109
760024869 ........................... 94
760024869-APAQ .......... 101
760024869-SPAQ ............. 97
760024893 ........................ 149
760024893-ARAQ ......... 154
760024893-SRAQ .......... 152
760024901 ........................... 15
760024919 ........................... 15
760024927 ........................... 15
760025338 ........................ 205
760025395 ........................ 165
760025403 ........................ 109
760025411 ........................ 169
760025429 ........................ 169
760025437 ........................ 169
760025460 ........................ 169
760025478 ........................ 135
760025494 ........................ 105
760026203 ........................ 251
760026229 ........................ 105
760026245 ........................ 191
760026310 ........................... 96
760026310-SRAQ ............. 99
760026336 ........................... 96
760026336-AHAQ ........ 103
760026369 ..............192, 198
760026393 ........................ 157
760026393-AROR ......... 160
760026393-SROR .......... 159
760026492 ........................... 53
760026500 ........................... 53
760026518 ........................... 53
760026526 ........................... 53
760026674 ........................ 192
760026682 ................... 18, 58
760026690 ........................... 58
760026716 ................... 18, 58
760026724 ........................... 58
760026740 ................... 18, 58
760026757 ........................... 33
760026765 ........................... 33
760026799 ........................... 59
760026807 ........................ 168

760026815-ARSL ........... 139

760026815-SRSL ............ 138
760026823-ARYL ........... 123
760026823-SRYL............ 122
760026831 ........................... 95
760026831-ARAQ ......... 102
760026831-SRAQ ............. 98
760026849 ........................... 95
760026849-ARAQ ......... 102
760026849-SRAQ ............. 98
760026856 ........................... 95
760026856-ARAQ ......... 102
760026856-SRAQ ............. 98
760026864 ........................... 95
760026864-ARAQ ......... 102
760026864-SRAQ ............. 98
760026872 ........................... 95
760026872-ARAQ ......... 102
760026872-SRAQ ............. 98
760027144 ........................... 15
760027151 ........................... 15
760027169 ........................... 15
760027177 ........................... 15
760027185 ........................... 15
760027318 ........................ 105
760027326 ........................... 46
760027342 ..............186, 192
760027433 ........................ 192
760027441 ........................ 192
760027516 ..............184, 190
760027557 ........................ 109
760027714 ........................ 192
760027722 ........................ 192
760027748 ........................ 187
760027771 ........................ 107
760027789 ........................ 126
760027797 ........................ 164
760028209 ........................ 192
760028324 ........................ 184
760028332 ........................ 184
760028373 ........................... 75
760028423 ........................ 225
760028431 ........................ 225
760028449 ........................ 225
760028456 ........................ 225
760028464 ........................ 225
760028472 ........................ 225
760028480 ........................ 225
760028498 ........................ 225
760028506 ........................ 225
760028514 ........................ 225
760028522 ........................ 225
760028530 ........................ 227
760028548 ........................ 227

307

760028555 ........................ 227

760028563 ........................ 227
760028571 ........................ 227
760028589 ........................ 227
760028597 ........................ 227
760028605 ........................ 227
760028613 ........................ 227
760028662 ........................ 227
760028670 ........................ 227
760028696 ........................ 227
760028704 ........................ 238
760028712 ........................ 238
760028720 ........................ 238
760028738 ........................ 238
760028753 ........................... 95
760031021 ........................ 187
760031039 ........................ 187
760031047 ..............186, 192
760031054 ..............186, 192
760031336 ........................ 225
760031344 ........................ 227
760031393 ........................ 201
760031401 ........................ 201
760031518 ........................ 251
760031526 ........................ 166
760031567 ........................ 230
760031575 ........................ 230
760031583 ........................ 230
760031591 ........................ 231
760031666 ........................ 112
760031674 ........................ 113
760031708 ........................... 75
760031724 ........................ 225
760031732 ........................ 225
760031740 ........................ 225
760031757 ........................ 227
760031765 ........................ 227
760031773 ........................ 227
760031849 ........................ 184
760031856 ........................ 184
760031898 ........................ 225
760031906 ........................ 225
760031914 ........................ 227
760031922 ........................ 227
760031930 ........................ 227
760032086 ........................ 184
760032094 ........................ 184
760032102 ........................ 188
760032110 ........................ 188
760032136 ........................ 188
760032144 ........................ 188
760032151 ........................ 188
760032169 ........................ 188
760032177 ........................ 188

Index

Material ID

Index

Page #

760032185 ........................ 188

760032193 ........................ 188
760032201 ........................ 188
760032219 ........................ 188
760032227 ........................ 187
760032235 ........................ 187
760032243 ........................ 187
760032250 ........................ 187
760032268 ........................ 187
760032276 ........................ 187
760032441 ........................ 113
760032813 ........................ 163
760032821 ........................ 135
760032821-APSL ........... 139
760032821-SPSL ............ 138
760032854 ........................ 166
760033217 ........................ 228
760033233 ........................ 171
760033787 ........................ 175
760033795 ........................ 223
760033803 ........................ 223
760033811 ........................ 223
760033845 ........................ 190
760033852 ........................ 190
760033860 ........................ 190
760033878 ........................ 190
760033886 ........................ 190
760033894 ........................ 190
760033902 ........................ 190
760033910 ........................ 190
760033928 ........................ 189
760033936 ........................ 189
760033951 ........................... 75
760033993 ........................ 225
760034009 ........................ 227
760034058 ........................ 187
760034066 ........................ 187
760034074 ........................ 187
760034082 ........................ 187
760034090 ........................ 187
760034108 ........................ 187
760034140 ........................ 201
760034157 ........................ 201
760034165 ........................ 201
760034173 ........................ 201
760034199 ........................ 201
760034215 ................... 37, 63
760034280 ........................ 175
760034637 ........................ 165
760034710 ................... 18, 58
760034736 ........................... 58
760034744 ........................ 264
760034751 ........................ 277
760034769 ........................ 277

760034777 ........................ 270

760034785 ........................ 269
760034793 ........................ 268
760034801 ........................ 268
760034819 ........................ 268
760034827 ........................ 268
760034850 ........................ 266
760034868 ........................ 266
760034876 ........................ 266
760034884 ........................ 265
760034892 ........................ 265
760034900 ........................ 266
760034918 ........................ 265
760034959 ........................ 280
760034967 ........................ 280
760034975 ........................ 280
760034983 ........................ 281
760034991 ........................ 281
760035006 ........................ 281
760035014 ........................ 281
760035022 ........................ 280
760035030 ........................ 277
760035048 ........................ 280
760035055 ........................ 280
760035063 ........................ 280
760035071 ........................ 280
760035089 ........................ 271
760035097 ........................ 271
760035105 ........................ 271
760035113 ........................ 271
760035121 ........................ 271
760035139 ........................ 271
760035147 ........................ 272
760035154 ........................ 272
760035162 ........................ 272
760035170 ........................ 272
760035188 ........................ 272
760035196 ........................ 272
760035204 ........................ 272
760035212 ........................ 272
760035220 ........................ 272
760035238 ........................ 272
760035246 ........................ 273
760035253 ........................ 273
760035261 ........................ 273
760035279 ........................ 273
760035287 ........................ 273
760035295 ........................ 273
760035303 ........................ 274
760035329 ........................ 275
760035337 ........................ 275
760035345 ........................ 275
760035352 ........................ 275
760035360 ........................ 275

308

760035378 ........................ 275

760035386 ........................ 275
760035394 ........................ 275
760035428 ........................ 276
760035436 ........................ 276
760035444 ........................ 276
760035451 ........................ 276
760035469 ........................ 276
760035477 ........................ 276
760035485 ........................ 276
760035501 ................... 18, 58
760035782 ........................ 113
760035790 ........................ 113
760035824 ........................ 163
760035840 ........................ 162
760035857 ........................ 162
760035865 ........................ 163
760035873 ........................ 163
760036020 ........................ 163
760036038 ........................ 162
760036046 ........................ 162
760036079 ................... 18, 58
760036087 ........................... 58
760036186 ........................... 95
760036277 ........................ 205
760036285 ........................ 205
760036293 ........................ 205
760036368 ........................ 223
760036384 ........................ 129
760036392 ........................ 145
760036400 ........................ 111
760036418 ........................ 111
760036426 ........................ 110
760036541 ........................ 164
760036608 ........................ 280
760036616 ........................ 280
760036624 ........................ 280
760036632 ........................ 280
760036640 ........................ 265
760036673 ........................ 280
760036681 ........................ 280
760036699 ........................ 274
760036707 ........................ 274
760036715 ........................ 274
760036723 ........................ 274
760036731 ........................ 274
760036749 ........................ 274
760036756 ........................ 274
760036764 ........................ 274
760036772 ........................ 275
760036780 ........................ 276
760036798 ........................ 276
760036806 ........................ 276
760036871 ........................ 223

Material ID

Page #

760036897 ........................ 171

760037168 ........................ 129
760037176 ........................ 129
760037184 ........................ 129
760037192 ........................ 129
760037200 ........................ 129
760037218 ........................ 129
760037226 ........................ 145
760037234 ........................ 145
760037242 ........................ 145
760037259 ........................ 145
760037267 ........................ 145
760037275 ........................ 145
760037283 ........................ 111
760037291 ........................ 111
760037309 ........................ 111
760037317 ........................ 111
760037325 ........................ 111
760037333 ........................ 111
760037341 ........................ 111
760037358 ........................ 111
760037366 ........................ 111
760037374 ........................ 111
760037382 ........................ 111
760037390 ........................ 111
760037408 ........................ 110
760037416 ........................ 110
760037424 ........................ 110
760037432 ........................ 110
760037440 ........................ 110
760037457 ........................ 110
760037804 ........................ 164
760037895 ........................ 129
760037903 ........................ 129
760037911 ........................ 129
760037929 ........................ 129
760037937 ........................ 129
760037945 ........................ 129
760037952 ........................ 145
760037960 ........................ 145
760037978 ........................ 145
760037986 ........................ 145
760037994 ........................ 145
760038000 ........................ 145
760038018 ........................ 111
760038026 ........................ 111
760038034 ........................ 111
760038042 ........................ 111
760038059 ........................ 111
760038067 ........................ 111
760038075 ........................ 111
760038083 ........................ 111
760038091 ........................ 111
760038109 ........................ 111

760038117 ........................ 111

760038125 ........................ 111
760038133 ........................ 110
760038141 ........................ 110
760038158 ........................ 110
760038166 ........................ 110
760038174 ........................ 110
760038182 ........................ 110
760038299 ........................ 165
760038372 ........................ 129
760039321 ........................ 162
760039339 ........................ 162
760039354 ........................ 165
760039586 ........................... 27
760039594 ........................... 26
760039602 ........................... 26
760039610 ........................... 27
760039628 ........................... 26
760039636 ........................... 26
760039644 ........................... 26
760039685 ........................ 175
760039701 ........................ 175
760039727 ........................ 175
760039743 ........................ 175
760039768 ........................ 175
760039784 ........................ 175
760039800 ........................ 175
760039826 ........................ 175
760039859 ..............184, 190
760039867 ..............184, 190
760039875 ..............184, 190
760039883 ..............184, 190
760039966 ........................ 112
760039974 ........................ 112
760039982 ........................ 112
760040089 ........................... 26
760040097 ........................... 26
760040105 ........................... 26
760040220 ........................ 176
760040246 ........................ 176
760040261 ........................ 176
760040303 ........................ 176
760040329 ........................ 176
760040444 ........................ 229
760040451 ........................ 229
760040469 ........................ 229
760040477 ........................ 229
760040485 ........................ 229
760040493 ........................ 229
760040501 ........................ 229
760040519 ........................ 229
760040527 ........................ 229
760040535 ........................ 229
760040543 ........................ 229

309

760040550 ........................ 229

760040568 ........................ 229
760040576 ........................ 229
760040584 ........................ 229
760040592 ........................ 229
760040600 ........................ 229
760040618 ........................ 229
760040626 ........................ 229
760040634 ........................ 229
760040642 ........................ 229
760040659 ........................ 229
760040667 ........................ 229
760040675 ........................ 229
760040683 ........................ 229
760040691 ........................ 229
760040709 ........................ 229
760040717 ........................ 229
760040808 ........................ 229
760040816 ........................ 229
760041897 ........................ 200
760041962 ........................... 37
760041970 ........................... 37
760041988 ........................... 37
760041996 ........................... 37
760042242 ........................ 162
760042390 ........................ 280
760042408 ........................ 280
760042457 ........................ 163
760042788 ........................... 16
760042960 ........................... 57
760042978 ........................... 57
760042994 ........................... 57
760043000 ........................... 57
760043018 ........................... 57
760043026 ........................... 57
760043521 ........................ 277
760045039 ........................ 244
760045047 ........................ 244
760045054 ........................ 244
760045062 ........................ 244
760045336 ........................ 264
760045344 ........................ 264
760046664 ........................ 267
760046961 ........................ 267
760046979 ........................ 267
760046987 ........................ 267
760046995 ........................ 267
760047001 ........................ 267
760047019 ........................ 268
760047027 ........................ 268
760047035 ........................ 268
760047241 ........................ 267
760047571 ........................... 16
760047589 ........................... 15

Index

Page #

Code

760047597 ........................... 15
760070070 ........................ 202
760078663 ........................ 135
760078663-APSL ........... 139
760078663-SPSL ............ 137
760341181 ........................ 201

Material ID

CPC

Index

999901661 ........................ 268

999901662 ........................ 268
999902002 ........................ 279
999902003 ........................ 279
999902004 ........................ 279
999902005 ........................ 279
999902006 ........................ 279
999902007 ........................ 279
999902008 ........................ 279
999902009 ........................ 279
999902010 ........................ 279
999902011 ........................ 279
999902012 ........................ 279
999902013 ........................ 279
999902022 ........................ 279
999902028 ........................ 278
999902029 ........................ 278
999902055 ........................ 279
999902063 ........................ 279
999902065 ........................ 279
999902068 ........................ 279
999902069 ........................ 279
999902076 ........................ 279
999902082 ........................ 279
999902083 ........................ 279
999902086 ........................ 279
999902087 ........................ 279
999902092 ........................ 278
999902093 ........................ 278
999902094 ........................ 278
999902095 ........................ 278
999902096 ........................ 278
999902097 ........................ 278
999902098 ........................ 278
999902099 ........................ 278
999902100 ........................ 278
999902101 ........................ 278
999902102 ........................ 278
999902103 ........................ 278
999902104 ........................ 279
999902105 ........................ 279
999902106 ........................ 279
999902107 ........................ 279

Page #

CPC3312 ................................ 38
CPC3322 ................................ 38
CPC3372 ................................ 38
CPC3382 ................................ 38
CPC3392 ................................ 38
CPC3472 ................................ 38
CPC3482 ................................ 38
CPC5312 ................................ 41
CPC5512 ................................ 41
CPC5552 ................................ 41
CPC5562 ................................ 41
CPC6442 ................................ 52
CPC6641 ................................ 52
CPC6642 ................................ 52
CPC7432 ................................ 21
CPC7732 ................................ 21
CPC8341 ................................ 70
CPC8342 ................................ 70
CPC8641 ................................ 70
CPC8642 ................................ 70
CPC8652 ................................ 70
CPC8842 ................................ 70
CPC8852 ................................ 70
CPC8862 ................................ 70
CPC9912 ................................ 38
CPCC312 ............................... 57
CPCC412 ............................... 57
CPCCC12 ............................... 57
CPCD312 ............................... 57
CPCD412 ............................... 57
CPCDD12 .............................. 57

FPC

FPCHMPMP6D-E ........... 178

FPCHMPMP6D-P ........... 178
FPCHMPMP6E-E............. 178
FPCHMPMP6E-P ............ 178
FPCHMPMP6F-E............. 178
FPCHMPMP6F-P ............ 178
FPCHMPMP6G-E............ 178
FPCHMPMP6G-P ........... 178
FPCHMPMP6H-E............ 179
FPCHMPMP6H-P ........... 178
FPCHMPMP9A-E ............ 178
FPCHMPMP9A-P............ 178
FPCHMPMP9B-P ............ 178
FPCHMXMX9A-P ........... 179
FPCMEPEP31-R ............... 147
FPCMEPEP32-R ............... 147
FPCMEPUC01-R.............. 146
FPCMEPUC11-R.............. 146
FPCMLCEP21-R ............... 147
FPCMLCEP22-R ............... 147

310

FPCMLCLC21-R ............... 147

FPCMLCLC22-H .............. 147
FPCMLCLC22-R ............... 147
FPCMLCLC31-P ............... 147
FPCMLCLC32-P ............... 147
FPCMLCSC22-H .............. 147
FPCMLCSC22-R .............. 147
FPCMLCST31-P ............... 147
FPCMLCST32-H .............. 147
FPCMLCST32-P ............... 147
FPCMLCUC01-R ............. 146
FPCMLCUC11-R ............. 146
FPCMSCEP21-R .............. 147
FPCMSCEP22-R .............. 147
FPCMSCEP31-R .............. 147
FPCMSCEP32-R .............. 147
FPCMSCSC21-R .............. 147
FPCMSCSC22-H ............. 147
FPCMSCSC22-R .............. 147
FPCMSCSC31-H ............. 147
FPCMSCSC31-P .............. 147
FPCMSCSC31-R .............. 147
FPCMSCSC32-H ............. 147
FPCMSCSC32-P .............. 147
FPCMSCSC32-R .............. 147
FPCMSCST31-H .............. 147
FPCMSCST32-H .............. 147
FPCMSCUC01-R ............. 146
FPCMSCUC11-R ............. 146
FPCMSTST31-H............... 147
FPCMSTST31-P ............... 147
FPCMSTST32-H............... 147
FPCMSTST32-P ............... 147
FPCWEPEP31-R............... 132
FPCWEPEP32-R............... 132
FPCWEPUC01-R ............. 131
FPCWEPUC11-R ............. 131
FPCWLCEP21-R .............. 132
FPCWLCEP22-R .............. 132
FPCWLCLC21-R .............. 132
FPCWLCLC22-H .............. 132
FPCWLCLC22-R .............. 132
FPCWLCLC31-P .............. 132
FPCWLCLC32-P .............. 132
FPCWLCSC22-H ............. 132
FPCWLCSC22-R .............. 132
FPCWLCSC31-P .............. 132
FPCWLCSC32-P .............. 132
FPCWLCST31-P ............... 132
FPCWLCST32-H .............. 132
FPCWLCST32-P ............... 132
FPCWLCUC01-R ............. 131
FPCWLCUC11-R ............. 131
FPCWMPMP6D-E .......... 179

Code

Page #

FPCWMPMP6D-P .......... 179

FPCWMPMP6E-E ........... 179
FPCWMPMP6E-P ........... 179
FPCWMPMP6F-E ........... 179
FPCWMPMP6F-P ........... 179
FPCWMPMP6G-E .......... 179
FPCWMPMP6G-P .......... 179
FPCWMPMP6H-E .......... 179
FPCWMPMP6H-P .......... 179
FPCWMPMP9A-E ........... 179
FPCWMPMP9A-P .......... 179
FPCWMXEPYA-E ............ 181
FPCWMXEPYA-P ............ 181
FPCWMXEPYD-E............ 181
FPCWMXEPYD-P ........... 181
FPCWMXEPYE-E ............. 181
FPCWMXEPYE-P............. 181
FPCWMXEPYF-E ............. 181
FPCWMXEPYF-P............. 181
FPCWMXLCYA-E ............ 181
FPCWMXLCYA-P ............ 181
FPCWMXLCYD-E............ 181
FPCWMXLCYD-P ........... 181
FPCWMXLCYE-E ............. 181
FPCWMXLCYE-P ............ 181
FPCWMXLCYF-E ............. 181
FPCWMXLCYF-P............. 181
FPCWMXSCYA-E ............ 181
FPCWMXSCYA-P ............ 181
FPCWMXSCYD-E ........... 181
FPCWMXSCYD-P ........... 181
FPCWMXSCYE-E ............ 181
FPCWMXSCYE-P ............ 181
FPCWMXSCYF-E ............ 181
FPCWMXSCYF-P ............ 181
FPCWSCEP21-R .............. 132
FPCWSCEP22-R .............. 132
FPCWSCEP31-R .............. 132
FPCWSCEP32-R .............. 132
FPCWSCSC21-R .............. 132
FPCWSCSC22-H ............. 132
FPCWSCSC22-R .............. 132
FPCWSCSC31-P .............. 132
FPCWSCSC31-R .............. 132
FPCWSCSC32-H ............. 132
FPCWSCSC32-P .............. 132
FPCWSCSC32-R .............. 132
FPCWSCST31-P .............. 132
FPCWSCST32-H.............. 132
FPCWSCST32-P .............. 132
FPCWSCUC01-R ............. 131
FPCWSCUC11-R ............. 131
FPCWSTST31-P ............... 132
FPCWSTST32-H .............. 132

FPCWSTST32-P ............... 132

FPCXEPEP31-R ................ 115
FPCXEPEP32-R ................ 115
FPCXEPUC01-R ............... 114
FPCXEPUC11-R ............... 114
FPCXLCEP21-R ................ 115
FPCXLCEP22-R ................ 115
FPCXLCLC21-R ................ 115
FPCXLCLC22-H ............... 115
FPCXLCLC22-R ................ 115
FPCXLCLC31-P ................ 115
FPCXLCLC32-P ................ 115
FPCXLCSC22-H ............... 115
FPCXLCSC22-R ................ 115
FPCXLCSC31-P ................ 115
FPCXLCSC32-P ................ 115
FPCXLCST31-P ................ 115
FPCXLCST32-H................ 115
FPCXLCST32-P ................ 115
FPCXLCUC01-R ............... 114
FPCXLCUC11-R ............... 114
FPCXSCEP21-R ................ 115
FPCXSCEP22-R ................ 115
FPCXSCEP31-R ................ 115
FPCXSCEP32-R ................ 115
FPCXSCSC21-R ............... 115
FPCXSCSC22-H ............... 115
FPCXSCSC22-R ............... 115
FPCXSCSC31-P ............... 115
FPCXSCSC31-R ............... 115
FPCXSCSC32-H ............... 115
FPCXSCSC32-P ............... 115
FPCXSCSC32-R ............... 115
FPCXSCST31-P ................ 115
FPCXSCST32-H ............... 115
FPCXSCST32-P ................ 115
FPCXSCUC01-R............... 114
FPCXSCUC11-R............... 114
FPCXSTST32-P ................. 115
FPCXSTST31-P ................. 115
FPCXSTST32-H ................ 115
FPCZMPMP6D-E ............ 179
FPCZMPMP6D-P ............ 179
FPCZMPMP6E-E ............. 179
FPCZMPMP6E-P ............. 179
FPCZMPMP6F-E ............. 179
FPCZMPMP6F-P ............. 179
FPCZMPMP6G-E ............ 179
FPCZMPMP6G-P ............ 179
FPCZMPMP6H-E ............ 179
FPCZMPMP6H-P ............ 179
FPCZMPMP9A-E ............ 179
FPCZMPMP9A-P ............ 179
FPCZMPMP9B-P............. 179

311

FPCZMPMX9A-P ............ 179

FPCZMXEPYA-E .............. 181
FPCZMXEPYA-P .............. 181
FPCZMXEPYD-E ............. 181
FPCZMXEPYD-P ............. 181
FPCZMXEPYE-E .............. 181
FPCZMXEPYE-P .............. 181
FPCZMXEPYF-E .............. 181
FPCZMXEPYF-P .............. 181
FPCZMXLCYA-E .............. 180
FPCZMXLCYA-P .............. 180
FPCZMXLCYD-E ............. 180
FPCZMXLCYD-P ............. 180
FPCZMXLCYE-E .............. 180
FPCZMXLCYE-P .............. 180
FPCZMXLCYF-E .............. 180
FPCZMXLCYF-P .............. 180
FPCZMXMX9A-P............ 179
FPCZMXSCYA-E .............. 180
FPCZMXSCYA-P.............. 180
FPCZMXSCYD-E ............. 180
FPCZMXSCYD-P ............. 180
FPCZMXSCYE-E .............. 180
FPCZMXSCYE-P .............. 180
FPCZMXSCYF-E .............. 181
FPCZMXSCYF-P .............. 181

Index

Product Index
Cables

Copper
GigaSPEED X10D, 91 Series Cables ............................................ 15 -17
GigaSPEED XL Category 6, 71 Series Cables .......................26 - 32
PowerSUM Category 5e, 61 Series Cables .............................45 - 47
PowerSUM 25-Pair Category 5 UTP, 61 Series Cables ......53 - 54
Category 3, UTP Cables ......................................................................60 - 61
ARMM Riser Cables...........................................................................................61
Fiber Optic
LazrSPEED Laser Optimized Multimode Cables ............ 94 - 113
TeraSPEEDTM Zero Water Peak Singlemode Cables .. 119 - 130
OptiSPEED Multimode Cables ............................................... 135 - 145
Composite Fiber Optic Cables ................................................. 148 - 172

Connectors / Outlets / Adapters

Index

Copper
GigaSPEED X10D MGS500 Information Outlets .........................19
GigaSPEED XL MGS400 Information Outlets ................................37
PowerSUM MPS100E Information Outlets .......................................51
25-Pair Category 5, Connectors & Cable Assemblies ................56
Ruggedized Connectivity Solution for Harsh Environments 57
M1 Category 3, Information Outlets ....................................................62
Video Adapters ........................................................................................72 - 74
Dust Covers for M-Series Faceplates and Outlets .................... 252
Modular Information Outlet ICON Inserts ..................................... 253
Fiber Optic
LC Connectors ................................................................................................. 201
SC Connectors ................................................................................................ 202
STII Connectors .............................................................................................. 203
STII+ Connectors ........................................................................................... 204
Fiber Optic Adapters ................................................................................... 205
Multiport Adapters ....................................................................................... 206
M81 Series Modular Fiber Optic Adapter with Mounting
Module......................................................................................................... 207

Cords

Copper
GigaSPEED X10D GS10E Patch Cords ...............................................21
GigaSPEED XL GS8E Patch Cords .........................................................38
VisiPatchTM Patch Cords .............................................................................41
PowerSUM D8PS Patch Cords ..................................................................52
110 Patch Cords and Adapter Cords ...................................................70
Fiber Optic
LazrSPEED Multimode Fiber Optic Patch Cords and
Pigtails .......................................................................................................... 114
TeraSPEED Singlemode Fiber Optic Patch Cords and
Pigtails .......................................................................................................... 131

OptiSPEED Multimode Fiber Optic Patch Cords and

Pigtails .......................................................................................................... 146
InstaPATCH Plus Pre-terminated Cables and Cords............... 177
InstaPATCH Plus Ruggedized Fanout Cable .............................. 180

Panels / Shelves

Copper
GigaSPEED X10D Universal Modular Patch Panel .....................18
GigaSPEED XL 1100GS3 Modular Patch Panel ............................33
GigaSPEED XL 1100GS3 Multimedia Distribution
Hardware ......................................................................................................34
GigaSPEED XL PATCHMAX GS3 Distribution Hardware .......35
VisiPatch System ............................................................................................39
PowerSUM 1100PS Modular Patch Panel .........................................48
PowerSUM PATCHMAX Distribution Hardware .................49 - 50
PowerSUM 2500 and 2512 Modular Patch Panel ........................55
Universal Modular Patch Panel ................................................................58
FlexiMAX Patch Panel ....................................................................................59
M1000P5 MultiMAX Panel ..........................................................................59
110 Connectivity System ....................................................................64 - 71
iPatch Intelligent Patching System .................................................. 220
iPatch System Components ................................................................ 221
Fiber Optic
InstaPATCH Plus Modular Shelf and DM2
Modules ........................................................................................ 174 - 175
InstaPATCH Plus Pre-terminated Shelves .................................... 176
600G2 Fiber Optic Modular Shelf .......................................... 183 - 184
1000G2 Fiber Optic Modular Shelf ........................................ 185 - 186
G2 Modules ......................................................................................... 187 - 188
600G2 Fiber Optic Panel Shelf ................................................. 189 - 190
1000G2 Fiber Optic Panel Shelf .............................................. 191 - 192
Fiber Optic LIUs, Splice and Termination Shelves ......... 193 - 200
iPatch Intelligent Patching System .................................................. 220
iPatch System Components ................................................................ 221

Protection Products

Category 6 and 5e, OSP Protector Unit ..............................................75

Category 3, OSP Protection Products .......................................76 - 79

Tools and Consumables

Copper
110 Tools ................................................................................................................71
Fiber Optic
12A Clamp ......................................................................................................... 195
Mechanical and Fusion Splice Adapter Kits .................................. 197
Tool Kits for STII, STII+, SC and LC Connectors ................ 208 - 213
Breakout and Splitter Kits ............................................................ 214 - 215
Fiber Optic Connector - Consumable Kits ....................... 216 - 218

312

Racks / Cabinets / Cable Runway

Standard Open Racks ................................................................................. 264

Wall Mount Racks .......................................................................................... 264
Rack Cable Management ............................................................ 265 - 269
Rack Accessories ............................................................................................ 270
Steel Frame Cabinets ..................................................................... 271 - 272
Aluminum Cabinets ....................................................................... 273 - 274
Cabinet Cable Management ................................................................. 275
Cabinet Accessories ....................................................................... 276 - 277
EMEA Cabinets and Accessories ............................................. 278 - 279
Cable Runway System ................................................................... 280 - 281

Wireless / Power over Ethernet

AP542 Access Points ...................................................................... 224 - 225

AP541 Access Points ...................................................................... 226 - 227
Signal Enhancing Antennas ................................................................... 228
Wavelink Management Software ........................................................ 229
PoE Non-Managed Devices .................................................................... 230
PoE Managed Devices ............................................................................... 231

Zone Boxes / Faceplates

Flush Mounted Faceplates ......................................................... 234 - 241

Modular Furniture Faceplates .................................................. 242 - 246
International Faceplates & Clips ............................................. 247 - 251
Dust Covers for M-Series Faceplates & Outlets .......................... 252
Modular Information Outlet ICON Inserts ..................................... 253
Zone and Surface Mount Boxes ............................................. 255 - 261

Index

313

Solutions Catalog

2005 CommScope, Inc.

All rights reserved.
Visit our Web site at www.systimax.com or contact your local
SYSTIMAX Solutions representative or SYSTIMAX BusinessPartner
for more information. SYSTIMAX Solutions is a trademark of
CommScope. All trademarks identied by or are registered
trademarks or trademarks, respectively, of CommScope.
This document is for planning purposes only and is not intended
to modify or supplement any specications or warranties relating
to SYSTIMAX Solutions products or services.
09/05 MI 74

company