This document summarizes the wind load calculations for a building based on ASCE 7-05. It provides the building details and wind speed. It then calculates the velocity pressure, exposure factors, topographic factors, and internal/external pressure coefficients at various heights according to ASCE 7-05. The combined windward and leeward pressures are calculated. Finally, the design wind loads are determined for the windward and leeward faces of the building.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
This document summarizes the wind load calculations for a building based on ASCE 7-05. It provides the building details and wind speed. It then calculates the velocity pressure, exposure factors, topographic factors, and internal/external pressure coefficients at various heights according to ASCE 7-05. The combined windward and leeward pressures are calculated. Finally, the design wind loads are determined for the windward and leeward faces of the building.
This document summarizes the wind load calculations for a building based on ASCE 7-05. It provides the building details and wind speed. It then calculates the velocity pressure, exposure factors, topographic factors, and internal/external pressure coefficients at various heights according to ASCE 7-05. The combined windward and leeward pressures are calculated. Finally, the design wind loads are determined for the windward and leeward faces of the building.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
This document summarizes the wind load calculations for a building based on ASCE 7-05. It provides the building details and wind speed. It then calculates the velocity pressure, exposure factors, topographic factors, and internal/external pressure coefficients at various heights according to ASCE 7-05. The combined windward and leeward pressures are calculated. Finally, the design wind loads are determined for the windward and leeward faces of the building.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
You are on page 1/ 8
PROJECT:
JOB REF:
Building
D2010
REVISION:
PART OF STRUCTURE:
WIND LOADS ACTING ON STRUCTURE
CALC. BY:
A.A
DRAWING REFERENCE:
CHECK. BY:
A.A
DESIGN CODE
ASCE7-05
WIND LOADS ACTING ON THE STRUCTURE BASED ON ASCE 7-05
6.5 METHOD 2- ANALYTICAL PROCEDURE Applicable since the building satisfies the two conditions set forth in Sec. 6.5.1:
(ASCE 7-05, 6.2)
1. The building is regular in shape
2. The building does not have response characteristics making it subject to across wind loading, vortex shedding, instability due to galloping or flutter; or does not have a site location for which channeling effects or buffeting in the wake of upwind obstructions warrant special consideration.
roof
6.5.12. Design Wind Loads on Enclosed and Partially Enclosed Buildings. (all Heights)
= 45.14 = 12
Height above local ground level
number of stories
= (0.613 v) Kz Kzt Kd I
Velocity pressure where, 0.613=1/5 Air density
= 45
Basic wind speed (3 sec gust)
m/sec
leeward
No. qz
windward
(ASCE 7-05, 6.5.10)
= 100.6621 mph local Gr. Level
Terrain category:
Exposure B
Exposure C
ASCE 7-05, Table(6-4)
Structure Type
Kd
= 0.85
Exposure D
Kd
Directionality factor
Occupancy category of buildings and other structures for wind loads
ASCE 7-05, Table (1-1) Nature of Occupancy
211774985.xls.ms_office
(ASCE 7-05, 6.5.4.4)
PROJECT:
JOB REF:
Building
D2010
REVISION:
PART OF STRUCTURE:
WIND LOADS ACTING ON STRUCTURE
CALC. BY:
A.A
DRAWING REFERENCE:
CHECK. BY:
A.A
DESIGN CODE
ASCE7-05
*Cogeneration power plants that do not supply power on the national grid shall be designated Occupancy Category II. Occupancy Category:
III
Region I
= 1.15
(ASCE 7-05, 6.5.5, Table [6-4])
Importance factor
ASCE 7-05, Table (6-2)
Exposure a
b0.45
zmin*
365.76
a114.0
7.0
b^ 0.84
a^ 117.0
0.30
97.54
113
9.14
9.5
274.32
119.5
1.00
116.5
0.65
0.20
152.40
115
4.57
11.5
213.36
1111.5
1.07
119.0
0.80
0.15
198.12
118
2.13
zg
*zmin = minimum height used to ensure that the equivalent height z is greater of 0.6h or z min. For buildings with h 5 zmin, z shall be taken as zmin a zg
= 7.0 = 365.76
Kz
= 2.01(z/zg)2/a = 2.01(4.572/zg)2/a
Kz min
m (ASCE 7-05, 6.5.6.6, Table [6-3])
Velocity exposure (see the following tables)
(metric units)
Local ground
H/2
Lh
Hill shape H Lh
= 0 = 13000
H/Lh
= 0.00 = 500
K1/(H/Lh) = 0.75 211774985.xls.ms_office
Direction m
Height of Hill
Distance upwind of crest to where the difference in ground elevation is half the height of hill
Distance from the crest to the building
PROJECT:
K1 Lh
= 0.00 = 13000
m K2
= 1.50 = 0.97
1 - x/mLh
g K3
= 2.50 = 0.99
e-gz/Lh
Kzt
= 1.00
[1+K1K2K3]2
= 0.85
Gust effect factor
JOB REF:
Building
D2010
REVISION:
PART OF STRUCTURE:
WIND LOADS ACTING ON STRUCTURE
CALC. BY:
A.A
DRAWING REFERENCE:
CHECK. BY:
A.A
DESIGN CODE
ASCE7-05
(ASCE 7-05, 6.5.7, Figure [6-4])
Topographic factor
Enclosure classification GCpi Cp Cp
= 0.18 = 0.80
Internal Pressure Coefficient, GCpi
(ASCE 7-05, 6.5.9, Figure [6-5])
Windward wall
(ASCE 7-05, 6.11.2, Figure [6-6])
= -0.50 = -0.70
Leeward wall
(ASCE 7-05, 6.11.2, Figure [6-6])
Cp
Side wall
(ASCE 7-05, 6.11.2, Figure [6-6])
Cp
= variable as shown
Roof
(ASCE 7-05, 6.11.2, Figure [6-6])
-0.70
0.80
Plan
-0.90
-0.50
-0.30
-0.50 0.80
Elevation
-0.50
-0.70
= qGCp-qi(GCpi) = qz
qi
= qh = qh
211774985.xls.ms_office
(ASCE 7-05, 6.5.12)
For windward walls, evaluated at height z from the ground For leeward walls, side walls, and roofs, evaluated at height h For windward walls, side walls, leeward walls, and roofs of enclosed buildings
PROJECT:
JOB REF:
Building WIND LOADS ACTING ON STRUCTURE
CALC. BY:
A.A
DRAWING REFERENCE:
CHECK. BY:
A.A
Output velocity pressures
Kd z v
211774985.xls.ms_office
PART OF STRUCTURE:
DESIGN CODE
WIND LOADS ACTING ON THE STRUCTURE BASED ON ASCE 7-05
D2010
REVISION:
Kzt
Kz
qz
45
0.85
1.15
0.57472
697.3621
4.88
45
0.85
1.15
0.585525 710.4736
8.54
45
0.85
1.15
0.687045 833.6569
12.2
45
0.85
1.15
0.760751 923.0922
15.86
45
0.85
1.15
0.81997
994.9479
19.52
45
0.85
1.15
0.870087
1055.76
23.18
45
0.85
1.15
0.913875 1108.891
26.84
45
0.85
1.15
0.952967 1156.326
30.5
45
0.85
1.15
0.988416
34.16
45
0.85
1.15
1.020945 1238.809
37.82
45
0.85
1.15
1.051071 1275.364
41.48
45
0.85
1.15
1.07918
1309.472
45.14
45
0.85
1.15
1.10557
1341.493
1199.34
ASCE7-05
PROJECT:
JOB REF:
Building
PART OF STRUCTURE:
WIND LOADS ACTING ON STRUCTURE
CALC. BY:
A.A
DRAWING REFERENCE:
CHECK. BY:
A.A
ASCE7-05
DESIGN CODE
WIND LOADS ACTING ON THE STRUCTURE BASED ON ASCE 7-05
