Celsius H720

Operating Manual
System
CELSIUS H720
Congratulations, you have decided to buy an innovative Fujitsu product.

The latest information about our products, useful tips, updates etc. is available from our website: "http://ts.fujitsu.com" For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html" Should you have any technical questions, please contact: our Hotline/Service Desk (see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") Your sales partner Your sales ofce We hope you really enjoy using your new Fujitsu system.
Copyright Fujitsu Technology Solutions 06/2012 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Strae 8 (Mies-van-der-Rohe Street No. 8) 80807 Munich, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. Subject to technical alterations. Delivery subject to availability. No warranty is offered or liability accepted in regard of the completeness, correctness, or current applicability of any data or illustrations. Brand names may be protected trademarks of the respective manufacturer and/or protected by copyright. Use of these by third parties for their own purposes may constitute an infringement of the holders rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26391-K365-Z320-1-7619, edition 1
CELSIUS H720
Operating Manual
Innovative technology Ports and operating elements Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturers notes Index
7 9 12 15 18 50 59 65 73 75 82 85 92
Microsoft, MS and Windows are registered trademarks of the Microsoft Corporation. Adobe Reader is a trademark of Adobe Systems Incorporated. MultiMediaCard is a registered trademark of Inneon Technologies AG Sony and Memory Stick are registered trademarks of Sony Electronics, Inc.
Manufactured under licence from DTS Licensing Limited. DTS and the symbol are registered trademarks & DTS Boost is a trademark of DTS, Inc. Product includes software. DTS, Inc. All rights reserved. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright Fujitsu Technology Solutions GmbH 2012 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole. In the event of violations, perpetrators will be liable to prosecution for damages. All rights reserved, including rights created by patent grant or registration of a utility model or design. Subject to availability and technical modications.
Contents
Contents
Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ports and operating elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Additional safety notes for devices with radio components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Energy saving under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Travelling with your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before you travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notebook: transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . First-time setup of your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unpacking and checking the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mains adapter connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching on the device for the rst time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 8 9 12 12 12 13 13 13 13 14 14 15 15 16 16 17
Working with the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Switching on the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Notebook: switching off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Separate number block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Country and keyboard settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Application keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Programming the application keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Touchpad and touchpad buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Moving the pointer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Selecting an item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Executing commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Dragging items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 LCD screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Charging, caring for and maintaining the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Removing and installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Removing a module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Installing a module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Optical drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Handling data carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 CD/DVD indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Inserting or removing a data carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Manual removal (emergency removal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Removing and tting the dust removal cover (ventilation slot cover) . . . . . . . . . . . . . . . . . . . . . . . . . 36 Using the power-management features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Fujitsu Technology Solutions
Contents
Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ExpressCards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loudspeakers and microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Removing a SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wireless LAN / Bluetooth (device-dependent) / UMTS / LTE (device-dependent . . . . . . . . . . . . . Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Access via UMTS / LTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ethernet and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Your Port Replicator (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ports on the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting the notebook to the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting the mains adapter to the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching on the notebook via the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching off notebook via Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disconnecting the notebook from the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conguring the ngerprint sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Security Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conguring password protection in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Protecting BIOS Setup Utility (supervisor and user password) . . . . . . . . . . . . . . . . . . . . . . . . . . . Password protection for booting of the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Password protection for the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Activating hard disk protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deactivating hard disk protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Boot from Removable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Owner Information (device-dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Virus Warning (device-dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SmartCard reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the SmartCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trusted Platform Module (TPM) (device-dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Enabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting an external monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting external devices to the serial port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Port settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Device drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting an external SATA hard disk (eSATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safe removal of eSATA and USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting external audio devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microphone port/Line In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Headphone port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39 39 39 40 40 41 42 42 43 43 43 44 44 45 45 45 46 46 47 48 48 48 49 50 50 51 51 52 53 54 54 54 55 55 56 57 57 58 58 58 59 60 61 61 61 62 63 63 64 64 64
Contents
Removing and installing components during servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Notes on installing and removing boards and components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Preparing to remove components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Installing and removing memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Removing a cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Removing memory modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Installing a memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Removing and installing the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Removing a cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Removing a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Installing a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Finishing component removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Settings in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Starting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . Exit Discarding Changes Discard changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . Load Setup Defaults Copy Standard Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Discard Changes Discard changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . Save Changes and Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Restoring the hard disk contents under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The notebooks date or time is incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The notebooks LCD screen remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The LCD screen is difcult to read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The external monitor remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The external monitor is blank or the image is unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The notebook cannot be started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The notebook stops working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The printer does not print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The radio connection to a network does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acoustic warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Error messages on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mains adapter 150W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Port Replicator (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manufacturers notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Energy Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Declarations of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Regulatory notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Regulatory information for notebooks without radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 73 73 74 74 74 74 74 74 74 75 75 76 76 76 77 77 77 78 78 79 79 79 80 82 82 83 83 84 85 85 85 85 86 86 86
Contents
DOC (Industry CANADA) notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC regulatory information for notebooks with radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
88 90 92
Innovative technology
... and ergonomic design make your device a reliable and convenient companion. The device boots very quickly, is ready for immediate use and offers a particularly long operating time because of its high capacity battery. With the user-friendly "BIOS Setup Utility" you can control your notebooks hardware and better protect your system against unauthorised access by using the powerful password properties. Information on the connections and user components of your notebook can be found in "Ports and operating elements", Page 9.
Further information
The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used. Software oriented components of these instructions refer to Microsoft products, if they come within the scope of the delivery. If you install other software products, pay attention to the operating instructions of the manufacturer.
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device.
This font
Indicates an activity that must be performed Indicates a result indicates data entered using the keyboard in a program dialogue or at the command line, e.g. your password (Name123) or a command used to start a program (start.exe) indicates information that is displayed on the screen by a program, e.g.: Installation is complete. Indicates terms and texts used in a software interface, e.g.: Click on Save names of programs or les, e.g. Windows or setup.exe. Indicates cross-references to another section, e.g. "Safety information" cross-references to an external source, e.g. a web address: For more information, go to "http://ts.fujitsu.com" Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g: F10 indicates terms and texts that are emphasised or highlighted, e.g.: Do not switch off the device
This font This font
"This font"
Key
This font
Ports and operating elements

This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device.
1 2 3
4 7 9 8 4 10 11 5 6
15 14 13 7
12
9 10 11 12 13 14 15 = = = = = = = Touchpad Fingerprint sensor TouchStick Microphone port Headphone port Memory card slot ON/OFF switch for radio components
1 2 3 4 5 6 7 8
= = = = = = = =
WebCam (optional) WebCam LED (optional) Microphone Status indicators Application buttons ON/OFF switch Loudspeakers Touchpad buttons
Left panel
1 = Security Lock device 2 = Module bay with optical drive Right side
3 = SmartCard reader
1 2 1
1 2 3 4
= = = =
USB port (USB 3.0) ExpressCard slot (ExpressCard/34) eSATA port VGA monitor port
5 = Display port 6 = LAN port 7 = DC input connector (DC IN)
10
Underside
8 1
1 2 3 4
= = = =
Hard disk service compartment Memory service compartment Battery release Battery with SIM card slot under the battery
5 6 7 8
= = = =
Battery release Port for port replicator Ventilation slot cover Module release
11
Important notes
Important notes
Notes Importantnotes
This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook.
Safety notes
Notes Safetynotes
Please follow the safety notes provided in the "Safety/Regulations" manual as well as the safety notes given below. Please pay special attention to the sections in the manual marked with the symbol on the left. When connecting and disconnecting cables, observe the relevant notes in this operating manual. Read the information on the ambient conditions in the "Technical data", Page 82 and "First-time setup of your device", Page 15 before preparing your notebook for use and switching it on for the rst time. When cleaning the device, please observe the relevant notes in the section "Cleaning the notebook", Page 14. Pay attention to the additional safety notes for devices with radio components provided in the "Safety/Regulations" manual. Please refer to the notes in the chapter "Removing and installing components during servicing", Page 65. This notebook complies with the relevant safety regulations for data processing equipment. If you have questions about using your notebook in a particular area, please contact your sales outlet or our Hotline/Service Desk.
Additional safety notes for devices with radio components

Wireless LAN: Radiocomponent: Bluetooth,safetynotes
If a radio component (Wireless LAN, Bluetooth, UMTS) is integrated in your notebook, you must be sure to observe the following safety notes when using your notebook: Switch off the radio components when you are in an aircraft or driving in a car. Switch off the radio components when you are in a hospital, an operating room or near a medical electronics system. The transmitted radio waves can impair the operation of medical devices. Switch off the radio components when you let the device get near ammable gases or into hazardous environments (e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a re. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page 44.
12
Important notes
Energy saving
Energysaving Energy Notes
Switch the notebook off when it is not in use. Switch off external, connected devices if you are not using them. If you use the energy saving functions, the notebook uses less energy. You will then be able to work for longer before having to recharge the battery. Energy efciency is increased and the environmental impact is reduced. You save money while protecting the environment.
Energy saving under Windows

Make use of the power management features (see "Using the power-management features", Page 38).
Travelling with your notebook

Mobile operation Notebook Transportation Notes
Please observe the points listed below when travelling with your notebook.
Before you travel

Back up important data stored on your hard disk. Switch off the radio component for data security reasons. With data trafc via a wireless connection, it is also possible for unauthorised third parties to receive data.
Travel,notebook Notebook
Information on activating data encryption is provided in the documentation for your radio component.
If you wish to use your notebook during a ight, rst check with the ight attendants if it is OK to do so.
When travelling in other countries

If you are travelling abroad, check that the mains adapter can be operated with the local mains voltage. If this is not the case, obtain the appropriate mains adapter for your notebook. Do not use any other voltage converter! Check whether the local mains voltage and the power cable are compatible. If this is not the case, buy a power cable that matches the local conditions. Enquire with the corresponding government ofce of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 86).
13
Important notes
Notebook: transporting
Protect the notebook from severe shocks and extreme temperatures (e.g. direct sunlight in a car).
Notebook Transportation
If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives. Switch the notebook off. Unplug the mains adapter and all external devices from the power socket. Disconnect the mains adapter cable and the data cables for all external devices. Close the LCD screen. To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook.
Cleaning the notebook

Do not clean any interior parts yourself; leave this job to a service technician. Only use cleaning products designed for computers. Normal household cleaners and polishes can damage the markings on the keyboard and the device, the paintwork or the notebook itself. Ensure that no liquid enters the notebook. The LCD screen very sensitive to scratches. Only clean the display surface with a very soft, slightly damp cloth. Switch the notebook off. In order to prevent accidentially switching the device on, remove the power cable from the mains adaptor and remove the battery (see "Removing and installing the battery", Page 31). The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes.
Notes Cleaning Touchpad Keyboard Notebook CrystalViewdisplay LCDscreen
Ensure that no liquid enters the device.
14
First-time setup of your device

Gettingstarted First-timesetup
Please read the chapter "Important notes", Page 12. If your device is equipped with a Windows operating system, the necessary hardware drivers and supplied software are already pre-installed. Before you switch on the device for the rst time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 16. The mains adapter must be connected during the entire installation process. A system test is performed when your device is rst switched on. Various messages can appear. The display may remain dark for a short time or may icker. Please follow the instructions on the screen. NEVER switch off your device during the rst-time setup process. On delivery, the battery can be found in the battery compartment or in the accessories kit. The battery must be charged if you want to operate your device using the battery. When used on the move, the built-in battery provides the device with the necessary power. You can increase the operating time by using the available energy-saving functions. For instructions on how to connect external devices (e.g. mouse, printer) to your device, please refer to the operating manual for your device.
Unpacking and checking the device

Should you discover any damage that occurred during transportation, notify your local sales outlet immediately!
Unpack all the individual parts. Check your device for any visible damage which may have occurred during transportation.
Transport Packaging
You may need the packaging in the future, if you need to transport your device.
15
Selecting a location
Selectinga location Mainsadapter Device
Select a suitable location for the device before setting it up. Follow the instructions below when doing so: Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result. Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage. The underside of the device heats up during normal operation. Prolonged contact with the skin may become unpleasant or even result in burns. Place the device on a stable, at, non-slippery surface. Please note that the rubber feet of the device may mark certain types of delicate surfaces. Keep other objects at least 100 mm away from the device and its mains adapter to ensure adequate ventilation. Never cover the ventilation slots of the device. Do not expose the device to extreme environmental conditions. Protect the device from dust, humidity, and heat.
Mains adapter connecting

Mainsadapter Preparingforoperation
Observe the safety notes in the enclosed "Safety/Regulations" manual. The supplied power cable conforms to the requirements of the country in which you purchased your device. Make sure that the power cable is approved for use in the country in which you intend to use it. Connect the power cable (1) to the mains adapter. Plug the mains cable (2) into a mains outlet. Connect the mains adapter cable (3) to the DC jack (DC IN) of the device.
3 2
16
Switching on the device for the f rst time

Switchingon for the rsttime
On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch for wireless components to the ON position before switching on the device. When you switch on the device for the rst time, the supplied software is installed and congured. Because this procedure must not be interrupted, you should set aside enough time for it to be fully completed and connect the device to the mains using the mains adapter. During the installation process, DO NOT restart the device unless you are requested to do so! To make it easier to use your device for the rst time, the operating system is pre-installed on the hard disk. Switch on your device.
During installation, follow the instructions on screen. If a Windows operating system is installed on your device, you will nd more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet at "http://ts.fujitsu.com/support".
17
Working with the notebook

Notebook Notebook,operation
This chapter describes the basics for operating your notebook. Please read the chapter entitled "Connecting external devices", Page 59 for instructions on how to connect devices such as a mouse and a printer to the notebook. Please refer to the notes in "Important notes", Page 12.
Status indicators
Statusindicator panel
The status indicators provide information about the status of the power supply, the drives and the keyboard functions.
Indicator
Description Power-on indicator

Indicator Power-onindicator
The indicator is illuminated: The notebook is switched on. The indicator ashes (1 second on/1 second off): The notebook is in power saving mode. The indicator is not illuminated: The notebook is switched off or is in Save-to-Disk mode.
18
Indicator
Description Battery charging indicator The indicator lights up green: The mains adapter is connected and the installed battery or batteries are already fully charged, or no battery is installed. The indicator lights up orange: The mains adapter is connected and the installed battery or batteries are being charged. The indicator ashes orange: The mains adapter is connected and the installed battery or batteries cannot be charged (the battery is too hot for charging). The indicator is not illuminated: The mains adapter is not connected. First battery indicator The indicator lights up green: The rst battery is charged to between 51% and 100% of maximum capacity. The indicator slowly ashes green (1 second on/5 seconds off): The notebook is in suspend mode and power is being supplied by the rst battery. The rst battery is charged to between 51% and 100% of maximum capacity. The indicator lights up orange: The mains adapter is connected and the rst battery is being charged. The rst battery is charged to between 13% and 50% of maximum capacity. The indicator slowly ashes orange (1 second on/5 seconds off): The notebook is in suspend mode and power is being supplied by the rst battery. The rst battery is charged to between 13% and 50% of maximum capacity. The indicator ashes orange (for four seconds after installing the battery): The battery charge level is being checked. The indicator lights up red: The mains adapter is connected and the rst battery is being charged. The rst battery is charged to between 0% and 12% of maximum capacity. The indicator slowly ashes red (1 second on/5 seconds off): The notebook is in suspend mode and power is being supplied by the rst battery. The rst battery is charged to between 0% and 12% of maximum capacity. The indicator ashes red (1 second on/1 second off). Malfunction. The indicator is not illuminated: The rst battery is not installed or is not charged.
19
Indicator
Description Second battery indicator The indicator lights up green: The second battery is charged to between 51% and 100% of its capacity. The indicator slowly ashes green (1 second on/5 seconds off): The notebook is in suspend mode and power is being supplied by the second battery. The second battery is charged to between 51% and 100% of its capacity. The indicator lights up orange: The mains adapter is connected and the second battery is being charged. The second battery is charged to between 13% and 50% of its capacity. The indicator slowly ashes orange (1 second on/5 seconds off): The notebook is in suspend mode and power is being supplied by the second battery. The second battery is charged to between 13% and 50% of its capacity. The indicator ashes orange (for four seconds after installing the battery): The battery charge level is being checked. The indicator lights up red: The mains adapter is connected and the second battery is being charged. The second battery is charged to between 0% and 12% of its capacity. The indicator slowly ashes red (1 second on/5 seconds off): The notebook is in suspend mode and power is being supplied by the second battery. The second battery is charged to between 0% and 12% of its capacity. The indicator ashes red (1 second on/1 second off). Malfunction. The indicator is not illuminated: The second battery is not installed or is not charged. Energy saving functions indicator The indicator is illuminated: The energy saving functions are enabled (e.g. reduce screen brightness). The indicator is not illuminated: The energy saving functions have been disabled. Drive indicator
CD/DVDindicator Indicator
The indicator is illuminated: The hard disk drive or the CD/DVD in the optical drive of the notebook is being accessed. Num Lock indicator
Num Indicator Lock
The indicator is illuminated: The Num key has been pressed. The virtual numerical keypad is activated. You can output the characters indicated on the upper right of the keys. Caps Lock indicator
CapsLock Indicator
The indicator is illuminated: The Caps Lock key has been pressed. All the characters you type will appear in upper case. In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. Scroll Lock indicator
ScrollLock Indicator ScrollLock Indicator
The indicator is illuminated: The key combination Fn + Scr has been pressed. The effect that this key has varies between applications.
20
Switching on the notebook

Open the LCD screen.
Switching on
Press the ON/OFF switch for about one second to switch the notebook on.
The power-on indicator is lit.
Notebook: switching off

Back up your data and close all applications before you switch off your device. Otherwise data might be lost.
Shut down the operating system properly (e.g. from the Windows Start menu by clicking on Start - Shut Down - OK). If the notebook is not switched off automatically, press the ON/OFF switch for approx. ve seconds.
Notebook
Close the LCD screen.
21
Keyboard
Keyboard Numeric Buttons keypad
The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook. The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. The following description of keys refers to Windows. Additional functions supported by the keys are described in the relevant manuals supplied with your application programs. The gure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device.
Num
0
=
Alt Gr
22
Key
Description Backspace key The Backspace key deletes the character to the left of the cursor.
Backspace
Tab key The Tab key moves the cursor to the next tab stop.
Tabkey
Enter key (return) The Enter key terminates a command line. The command you have entered is executed when you press this key.
Linefeed Enter Return Enterkey
Caps Lock key The Caps Lock key activates the Caps Lock mode, and the corresponding icon is displayed in the Windows information area. In Caps Lock mode, all of the characters you type appear in upper case. In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. To cancel the Caps Lock function, simply press the Caps Lock key again.
CapsLock Shiftkey
Shift key The Shift key causes uppercase characters to appear. In the case of overlay keys, the character printed on the upper left of the key appears when that key is pressed.
Shift Shiftkey
Fn button The Fn key enables the special functions indicated on overlay keys (see "Key combinations", Page 24).
Fnkey
Cursor keys The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right.
Cursor keys controlkeys
Start key The Start key opens the Windows Start menu.
Startkey
Menu key The Menu key invokes the menu for the marked item.
23
Separate number block

Numeric Separatenumeric Num Lock keypad keypad
The keyboard of your notebook has a separate number block on the far right.
Key combinations
The following description of key combinations refers to functions when using Microsoft Windows. Some of the following key combinations may not function in other operating systems and with some device drivers. Key combinations are entered as follows: Press and hold the rst key in the combination. While holding the rst key down, press the other key or keys in the combination. The key combination Ctrl + Alt Gr or Ctrl + Alt can be used on external keyboards that do not not feature a Fn key.
Combination
Description
Loudspeakers Fn+F3
Enable/disable loudspeakers This key combination switches your notebooks loudspeakers off and on. Switching the touchpad on/off This key combination enables and disables the touchpad. Decrease screen brightness This key combination decreases the brightness of the screen.
Loudspeakers Touchpad Fn+F4
Screenbrightness Fn+F6
24
Combination
Screenbrightness Fn+F7
Description Increase screen brightness This key combination increases the brightness of the screen. Decrease volume This key combination reduces the volume of the integrated loudspeakers. Volume increase This key combination raises the volume of the integrated loudspeakers. Toggle output screen If an external monitor is connected, the monitor on which the output is to be displayed can be selected with this key combination. You can opt to use: just the notebooks LCD screen just the external monitor both the LCD screen and the external monitor Halt current operation
Volume Fn+F8
Volume Fn+F9
Toggleoutputscreen Fn+F10
Ctrl
Ctrl+C
This key combination can be used to halt an operation instantly without clearing the keyboard buffer. Switch between open applications With this key combination you can switch between several open applications.
Alt+Tab
Ctrl
Alt
Del
Windows Security/Task Manager This key combination opens the Windows Security/Task Manager window.
Ctrl+Alt+Del
Back tab This key combination moves the cursor back to the previous tabular stop.
Backtab Shift+Tab
Key combinations using the Windows keys are detailed in the manual for your operating system.
Country and keyboard settings

If you want to change the country and keyboard settings, proceed as follows: Enter the settings by clicking Start (Settings) Control Panel Time, Regional and Language Options.
25
Application keys
Applicationkeys
Your notebook is equipped with ve application keys. All application buttons are freely programmable, see "Programming the application keys", Page 27.
26
Button
Description Lock Workstation key This key allows you to lock your workstation. Mobility Center key This button starts the Mobility Center. E key The E key is a simple way of activating and deactivating power management functions (e.g. reduce screen brightness), see "Using the power-management features", Page 38. I key With the I key, you can obtain further information about your notebook. When this key is pressed in S5 mode, the rst battery indicator lights up and shows the state of charge of the battery, even if the device is switched off (see "Status indicators", Page 18). Wireless Components key This application key is used to start the WirelessSelector software. The wireless components that have been activated in the BIOS Setup can be switched on and off individually.
Programming the application keys

With the Application Panel you can assign various functions to the application keys. Windows XP You will nd the Application Panel under Start - (Settings) - Control Panel - Additional Control Panel Options - Application Panel. Windows 7: You will nd the Application Panel under Start symbol - Programs - Lifebook Application Panel.
27
Touchpad and touchpad buttons

Keep the touchpad clean. Protect it from dirt, liquids and grease.
Touchpad
Do not use the touchpad if your ngers are dirty. Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons. 1 = TouchStick
2 = Touchpad 3 = Touchpad buttons
The touchpad enables you to move the mouse pointer on the screen. The touchpad buttons allow you to select and execute commands. They correspond to the buttons on a conventional mouse. You can use a key combination to disable the touchpad, to avoid accidentally moving the pointer on the screen (see also "Key combinations", Page 24).
Moving the pointer

Move your nger on the touchpad. or Press down gently with your nger on the TouchStick. If you want to move the pointer to the left for example, press down gently on the left side of the TouchStick. The pointer will move.
Touchpad
Selecting an item
Move the pointer to the item you wish to select. Tap the touchpad once or press the left button once. The item is selected.
Touchpad
Executing commands
Move the pointer to the eld you wish to select. Tap the touchpad twice or press the left button twice. The command is executed.
Touchpad
28
Dragging items
or Move the pointer to the item you wish to select. Select the desired object and keep the left button pressed. Drag the object to the desired position. Lift your nger from the touchpad. Lift your nger from the TouchStick. The item will be moved.
LCD screen
Notes LCDscreen
High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specic resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specication can result in an unclear picture. The screen resolution of the LCD monitor of your notebook is optimally set at the factory. The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in the international standard ISO 9241-3 (Class II). Example: A monitor with a resolution of 1280 x 800 has 1280 x 800 = 1024000 pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 3 million subpixels in total. According to ISO 9241-3 (class II), a maximum of 2 light and 2 dark pixels and an additional 5 light or 10 dark subpixels or a corresponding mix may be defective (1 light subpixel counts as 2 dark subpixels). Pixel A pixel consists of 3 subpixels, normally red, green and blue. A pixel is the smallest element that can be generated by complete functionality of the display. A subpixel is a separately addressable internal structure within a pixel that enhances the pixel function. A cluster contains two or more defective pixels or subpixels in a 5 x 5 pixel block.
Subpixel Cluster
Background lighting TFT monitors are operated with background lighting. The luminosity of the background lighting can decrease during the period of use of the notebook. However, you can set the brightness of your monitor individually. Synchronising the display on the LCD screen and an external monitor For more information, please refer to the chapter "Key combinations", Page 24 under "Display output, switch between".
29
Webcam
Webcam
Depending on the device variant, a WebCam may be integrated in your notebook.
Depending on the software used, you can use your Webcam to take pictures, record video clips or take part in web chats. The picture quality depends on the lighting conditions and the software being used. You can only operate the webcam with a particular application (e.g. an Internet telephony program or a video conferencing program which supports a webcam). When using the webcam the notebook support must not wobble. The webcam automatically adjusts itself to the current light level. For this reason the LCD screen may icker while the light level is adjusted. Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam. If you wish to carry out a function test with your webcam, you can use the corresponding test software available at "http://ts.fujitsu.com/support/".
Rechargeable battery
Life,battery Battery Rechargeablebattery
When not plugged into a mains socket, the notebook runs on its built-in battery. You can increase the life of the battery by caring for the battery properly. The average battery life is around 500 charge/discharge cycles. You can extend the battery life by taking advantage of the available energy saving functions.
30
Charging, caring for and maintaining the battery

Battery
The notebook battery can only be charged, when the ambient temperature is between 5C and max. 35C. You can charge the battery by connecting the notebook to the mains adapter (see "Mains adapter connecting", Page 16). If the battery is running low you will hear a warning alarm. If you do not connect the mains adapter within ve minutes of the warning alarm described above, your notebook will automatically switch off. monitoring the battery charging level
Batterystatusmeter Battery
Windows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. When you place the mouse pointer on the battery symbol, the system displays the battery status. Battery storage
Battery Chargingcapacity,battery Self-discharge,battery
Keep the battery pack between 0C and +30C. The lower the temperature at which the batteries are stored, the lower the rate of self-discharge. If you will be storing batteries for a longer period (longer than two months), the battery charge level should be approx. 30 %. To prevent exhaustive discharge which would permanently damage the battery, check the level of charge of the battery at regular intervals. To be able to make use of the optimal charging capacity of the batteries, the battery should be completely discharged and then fully recharged. If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device.
Removing and installing the battery

Only use rechargeable batteries approved by Fujitsu Technology Solutions for your notebook. Never use force when tting or removing a battery. Make sure that no foreign bodies get into the battery connections. Never store a battery for longer periods in the discharged state. This can make it impossible to recharge.
31
Removing a battery
Prepare for removal, see chapter "Preparing to remove components", Page 66.
3
2
Disengage the release button (1). Slide the release button in the direction of the arrow (2). Remove the battery from the battery compartment (3).
Installing a battery
Position the battery at the edge. Push the battery into the battery slot until you feel it lock into place (1). Complete the removal, see chapter "Finishing component removal", Page 72.
32
Module
Modules Modulebay
The design of your notebook enables the exible use of notebook batteries and drives. The following modules can be operated in the module bay of your notebook: Second battery Second hard disk drive Optical drive Empty plug-in unit (save weight) Only use modules designed for your notebook. Do not use force when installing or removing the module. Make sure that no foreign objects enter the module bay. You can swap modules during operation. This means you do not need to switch off the notebook. To replace a module, simply click on the corresponding icon in the task bar and then on Exit or Select - Exit. The module can now be removed without any further actions being necessary.
Removing a module
1
2
WeightSaver Drive Module
Slide the release mechanism (1) in the direction of the arrow and hold. Now pull the module (2) out of the module bay.
33
Installing a module
Place the module into the module bay so that the contacts enter rst. Push the module into the module bay until you feel it locking into place.
Optical drive
Opticaldrive
This product contains a light emitting diode, classication according to IEC 60825 1:2007: LASER CLASS 1, and must therefore not be opened.
Handling data carriers

Handling
Observe the following guidelines when handling data carriers: Avoid touching the surface of a data carrier. Only handle data carriers by their edges. Always store data carriers in their cases. This will protect the data carrier against being covered in dust, scratched or damaged in any other way. Protect your data carriers against dust, mechanical vibrations and direct sunlight. Avoid storing a data carrier in areas subject to high temperatures or humidity. You may use both 8-cm and 12-cm data carriers in the optical drive. When using a data carrier of lesser quality, vibrations and reading errors may occur.
34
CD/DVD indicator
CD/DVDindicator
The CD/DVD indicator ashes when a data carrier is inserted. The indicator goes out when the drive is ready for reading. The indicator lights up when the drive is being accessed. You may only remove the data carrier when the indicator is unlit. If the CD/DVD indicator does not go out after a data carrier has been inserted, but instead continues to ash, this means that the drive cannot access the data carrier. Either the data carrier is damaged or dirty or you are using a data carrier that the drive cannot read.
Inserting or removing a data carrier

Removing Inserting
The notebook must be switched on. Push the insert/eject button (1). The drive tray will open. Gently pull the drive tray (2) completely out.
2 1
Place the data carrier in the drive tray with the printed side facing upwards. or Remove a data carrier that has been inserted. Push in the drive tray until you feel it lock into place.
35
Manual removal (emergency removal)

Emergencyremovalofdata carrier Manualremovalofdatacarrier CD/DVD:
In the event of a power failure or damage to the drive, you can remove the data carrier manually. Switch your notebook off. Push a pen or a piece of wire (such as a paperclip) rmly into the opening (1). The drive tray is ejected. You can now pull the drive tray (2) out of the drive.
Removing and f tting the dust removal cover (ventilation slot cover)
In order to ensure optimum cooling of the components in your notebook, you should periodically clean the ventilation slot of the heatsink. This ensures optimum fan performance. You can achieve the best cleaning results with a small hand-held vacuum cleaner. If necessary, you can also use a dry brush to release dust from the ventilation slots. Do not use any cleaning liquids! Ensure that no liquid enters the device. To avoid overheating of the device, do not remove the ventilation slot cover when the device is switched on. Prepare for removal, see chapter "Preparing to remove components", Page 66.
36
Press and hold the lock of the ventilation slot cover (1) and remove it from its slot (2). Clean the dust chamber.
Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. Complete the removal, see chapter "Finishing component removal", Page 72.
37
Using the power-management features

Power Battery
The notebook uses less power when the available power-management features are used. You will then be able to work longer when using the battery before having to recharge it. Power efciency is increased and environmental pollution reduced. By choosing the best power options, you can make signicant savings and at the same time help protect the environment. When you close the LCD screen, depending on the setting in Windows, the notebook automatically enters a power saving mode. We recommend the following settings: Function Turn off monitor Turn off hard disk(s) Energy saving (S3) Hibernate mode (S4) On external power After 10 minutes After 15 minutes After 20 minutes After 1 hour On battery power After 5 minutes After 10 minutes After 15 minutes After 30 minutes
Select the power management functions in your Control Panel. Select the Screen Saver in your Control Panel. or Right-click on the desktop. Switch on the screen saver by clicking Personalization Change screen saver. If you need further information about an option, you can get help with most settings by pressing F1 to open the Microsoft Help.
When the notebook is in power-saving mode, the following must be remembered: During power saving mode, open les are held in the main memory or in a swap le on the hard disk. Never turn off your notebook while it is in a power saving mode. If the built-in battery is nearly empty, close the open les and do not go into power saving mode. If you do not intend to use your notebook for a long period of time: Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. Close all opened programs and completely shut down the notebook.
38
Memory cards
Slot
Your notebook is equipped with an integrated memory card reader. Observe the manufacturers instructions when handling the memory cards.
Memory card
Supported formats
Your notebook supports the following formats: Secure Digital (SDTM card) Memory Stick (MS) Memory Stick Pro
Inserting the memory card

Carefully slide the memory card into the slot. The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged. Depending on the particular type used, the memory card may protrude slightly from the slot.
Memory card
39
Removing the memory card

Memorycard
In order to protect your data, always follow the correct procedure for removing the card outlined below.
You can stop the memory card via the corresponding icon in the task bar: Left-click on the icon. Select the card you want to stop and remove. Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the memory card. On devices with card locking: Press on the storage card (1). The storage card is released and can now be removed. Pull the storage card out of the slot (2).
Memory card
1 2
ExpressCards
ExpressCard Slot
An ExpressCard slot allows an ExpressCard/34 to be used with the computer. Consult the documentation supplied by the ExpressCards manufacturer and follow the instructions provided. Never use force when installing or removing an ExpressCard. Make sure that no foreign objects enter the ExpressCard slot.
40
Inserting the card

Keep the placeholder for the slot in a safe place. When you remove the card again, you must reinstall the place holder. This prevents foreign objects from getting into the slot.
Press the edge of the placeholder (1) to make the card placeholder protrude from the notebooks case. Pull the card placeholder out of the slot (2).
1 2
Insert the card into the slot guide with the connection contacts rst. Gently push the card into the slot until you feel it click into place. Do not use any force. Depending on the particular type used, the card may protrude slightly from the slot.
Please see the documentation relating to the card for driver installation instructions.
41
Removing the card

Always remove the card according to the rules described below, to ensure that none of your data is lost.
You can stop the ExpressCard using the corresponding symbol in the task bar: Click on the symbol for safe removal of hardware with the left mouse button. Select the ExpressCard you want to stop and remove. Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the ExpressCard. Press the edge of the card (1) so that the card protrudes a little from the notebook. Pull the card out of the slot (2).
1 2
Insert the card placeholder into the slot guide. Gently slide the card placeholder into the slot until you feel it click into place.
Loudspeakers and microphones

Bass loudspeaker (subwoofer) Loudspeakers Microphone Volumecontrol
Information on the exact position of the speakers and microphone can be found in "Ports and operating elements", Page 9. Please refer to chapter "Key combinations", Page 24 for information on setting the volume and also enabling/disabling the loudspeakers using key combinations. If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found in "Connecting external devices", Page 59.
42
SIM card
A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or notebook to enable access to a mobile radio network in conjunction with an installed UMTS module. Follow the instructions supplied by the provider of the SIM card. The SIM card slot is located in the battery compartment and can only be accessed when the battery is removed.
Inserting the SIM card

Prepare for insertion of the SIM card, see chapter "Preparing to remove components", Page 66. Slide the SIM card into the slot (1) a until it is felt to engage, as shown in the battery compartment. Slide the SIM card lock (a) in the direction of the arrow (2).
Complete the installation, see chapter "Finishing component removal", Page 72.
Removing a SIM card

Prepare for removal of the SIM card, see chapter "Preparing to remove components", Page 66. Slide the SIM card lock (a) in the a direction of the arrow (1). Press on the edge of the SIM card so that it jumps up slightly out of the slot. Pull the SIM card out of the slot in the direction of the arrow (2).
Complete the removal, see chapter "Finishing component removal", Page 72.
43
Wireless LAN / Bluetooth (device-dependent) / UMTS / LTE (device-dependent)

The installation of a radio components not approved by Fujitsu Technology Solutions will invalidate the certications issued for this device.
Switching the wireless components on and off

Before switching on your device for the rst time, the on/off switch for radio components must be in the "ON" position.
Slide the ON/OFF switch into the "ON" position to activate the radio components. or Slide the ON/OFF switch to the "OFF" position to deactivate the radio components.
Bluetooth WirelessLAN
If you switch off the radio components, the wireless LAN antenna and (when present) the Bluetooth and UMTS / LTE modules will also be switched off. You can enable and disable the installed radio components individually using the WirelessSelector programme You can also deactivate the wireless components individually in the BIOS Setup. For this to occur, you must either not have assigned a supervisor password or if a supervisor password has been assigned, you must know this password. Pay attention to the additional safety notes for devices with radio components provided in the "Safety/Regulations" manual. Details on using Wireless LAN can be found in the online help system included in the Wireless LAN software. You can nd more information on how to use Bluetooth on the CD you received with your Bluetooth software. You can obtain more information on UMTS / LTE from your service provider.
44
Setting up WLAN access

Requirement: A WLAN must be available and you must have the corresponding access information. Information on conguring the WLAN access can be found in the documentation for your operating system.
Access via UMTS / LTE

If you ordered an integrated UMTS / LTE module with your system, you can enjoy optimum reception and maximum energy efciency without awkward cables or antennas. The optional UMTS / LTE module is ready for use straight away. If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS / LTE reception from your retailer or your Fujitsu Technology Solutions dealer. You will nd information on establishing the connection with the UMTS / LTE network in the documentation for the hardware used. Your device can connect to the Internet via UMTS / LTE. To do this, use one of the following types of connection: Integrated UMTS / LTE module (availability dependent on your model variant) a USB dongle (a USB stick with your mobile phone providers SIM card) UMTS / LTE ExpressCard (ts into the ExpressCard slot on your device) a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
Ethernet and LAN

EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to establish a connection to a local network (LAN = Local Area Network). Connect the network cable to the LAN port of the notebook (1). Connect the network cable to your network connection (2).
Your network administrator can help you to congure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer.
45
Your Port Replicator (optional)

Your Port Replicator is a device that enables you to quickly connect your notebook to your peripherals, such as a monitor, printer etc. The features offered by the Port Replicator include standard ports for monitor, audio, mouse and keyboard. You need only dock the notebook in order to use your peripheral devices.
Ports on the Port Replicator
14
11 12 13 8 1
9 10
2 2 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9
= = = = = = = = =
LAN port USB ports (USB 3.0) e-SATA port Monitor port (VGA) DVI-D monitor port DisplayPort Serial port Kensington Lock Connector on the Port Replicator for the docking port on the underside of the notebook
10 11 12 13
DC input connector (DC IN) Microphone port/Line In Headphone port USB port with charging function (Anytime USB charge, USB 3.0) 14 = ON/OFF switch
= = = =
46
Connecting the notebook to the Port Replicator

If you connect the notebook to the Port Replicator during operation, problems can occur. We recommend that you switch off the notebook beforehand.
The mains adapter must be connected to the Port Replicator when the notebook is connected to the Port Replicator. We recommend that the notebook is not operated with the LCD monitor closed when the notebook is connected to the Port Replicator. The resulting overheating can cause reduced performance and increased activity of the integrated fan.
PortReplicator
Switch the notebook off. Remove the power plug of the mains adapter from the mains socket. Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
Position the notebook so that it is in line with the back edge of the Port Replicator. Push the notebook onto the Port Replicator in the direction of the arrow (1) until you notice it engage.
47
Connecting the mains adapter to the Port Replicator

Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (1). Connect the power cable to the mains adapter (2). Plug the power cable into the mains socket (3).
1 3
When the notebook is connected to a Port Replicator, the operating system creates a hardware prole for the "Docked" mode. In this prole, for example, the setting is saved as to which monitor was last used for output. This prole will be loaded, as soon as the notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator

Press the ON/OFF switch on the port replicator to switch the notebook on. The power-on indicator of the Port Replicator lights up.
Switching off notebook via Port Replicator

Close all applications and shut down your operating system (please refer to the manual for the operating system). If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost.
48
Disconnecting the notebook from the Port Replicator

Problems may occur if the notebook is removed from the Port Replicator during operation. We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. Switch the notebook off.
Hold underneath the notebook with the ngers. Press on the Port Replicator with the thumbs and lift up the notebook (1).
49
Security functions
Security functions
Securityfunctions
Your notebook has several security features that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benets are. Please remember that in some cases, for example, forgetting your password, you may be locked out and unable to access your data. Therefore, please note the following information: Make regular backups to external data carriers such as external hard drives, CDs, DVDs or Blu-ray Discs. Some security functions need you to choose passwords. Make a note of the passwords and keep them in a safe place. If you forget your passwords you will need to contact the our Service Desk. Deletion or resetting of passwords is not covered by your warranty and a charge will be made for assistance.
Conf guring the f ngerprint sensor

Fingerprintsensor
The ngerprint sensor can record an image of a ngerprint. With additional ngerprint software, this image can be processed and used instead of a password.
You must install the ngerprint software in order to be able to use the ngerprint sensor (1).
50
Security functions
Using the Security Lock

Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu Technology Solutions recommends the use of a combination lock.
Fit the Kensington Lock Cable to the mechanism on your notebook.

Cable UsingtheKensingtonLock Security Anti-theftprotection Mechanicalbackup Lock
Attach another Kensington Lock Cable to your Port Replicator to protect your Port Replicator from theft as well.
Conf guring password protection in BIOS Setup Utility

Before using the various options for password protection in the BIOS Setup utility to increase data security, please observe the following: Make a note of the passwords and keep them in a safe place. If you forget your supervisor password you will not be able to access your notebook. Passwords are not covered by your warranty and a charge will be made for assistance.
Password protection
Your password can be up to eight characters long and contain letters and numbers. No distinction is made between uppercase and lowercase.
51
Security functions
Protecting BIOS Setup Utility (supervisor and user password)

If you have opened these operating instructions on the screen, we recommend that you print out the following instructions. Because you cannot call the instructions onto the screen while you are setting up the password.
BIOS SetupUtility
You prevent unauthorised use of the BIOS Setup Utility with both the supervisor and the user password. The supervisor password gives you access to all functions of the BIOS Setup Utility, while the user password only provides some of the functions. You can only set a user password if a supervisor password has already been assigned. Please refer to the "Settings in BIOS Setup Utility", Page 73 section for a description of how to call up and operate the BIOS Setup Utility.
Setting supervisor and user password

Start the BIOS Setup Utility and go to the Security menu. Select the Set Supervisor Password eld and press the Enter key. With Enter new Password: you are asked to enter a password. Enter the password and press the Enter key. Conrm new Password requires you to conrm the password. Enter the password again and press the Enter key. Changes have been saved is a conrmation that the new password has been saved. To set the user password, select Set User Password and proceed exactly as when conguring the supervisor password. If you do not want to change any other settings, you can exit BIOS Setup Utility. In the Exit menu, select the option Save Changes & Exit. Select Yes and press the Enter key. The notebook will be rebooted and the new password will come into effect. It will now be necessary to rst enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings.
Supervisor password Password Userpassword
Changing the supervisor or user password

You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password.
User password Supervisorpassword Password
Call the BIOS Setup Utility and go to the Security menu. When changing the password, proceed exactly as for password assignment.
52
Security functions
Removing passwords
To remove a password (without setting a new password) perform the following steps:
User password Supervisorpassword Password
Start the BIOS Setup Utility and go to the Security menu. Highlight the Set Supervisor Password or Set User Password eld and press the Enter key. You will be requested to enter the current password by the Enter Current Password prompt. You will be requested to enter a new password by the Enter New Password prompt. Press the Enter key twice. In the Exit menu, select the option Save Changes & Exit. Select Yes and press the Enter key. The notebook will now reboot with the password removed. Removing the supervisor password simultaneously deactivates the user password.
Password protection for booting of the operating system

With the supervisor password you have set in the BIOS Setup Utility (see section "Setting supervisor and user password", Page 52), you can also prevent booting of the operating system.
Operating system
Activating system protection

Operatingsystem
Start the BIOS Setup Utility and go to the Security menu. Select the Password on Boot option and press the Enter key. Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key Select the Save Changes & Exit option under Exit. The notebook will reboot. You will be prompted to enter your password (the supervisor password).
Deactivating system protection

Start the BIOS Setup Utility and go to the Security menu. Select the Password on Boot option and press the Enter key. Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected.
Operatingsystem
53
Security functions
Password protection for the hard disk

Passwordprotection:
The had disk password prevents unauthorised access to the hard disk drives and is checked internally each time the system is booted. The condition for this is that you have assigned at least the supervisor password.
Activating hard disk protection

Call up the BIOS Setup and select the Security menu. If you have not assigned BIOS passwords yet, dene the supervisor and the user password now, if desired (see "Security functions", Page 50). Mark the Hard Disk Security eld and press the Enter key. In the Drive0 area mark the Set Master Password eld and press the Enter key. Enter new Password then appears and you are asked to enter a password. Enter the password and press the Enter key. Conrm new Password requires you to conrm the password. Enter the password again and press the Enter key. Setup Notice: Changes have been saved is displayed to conrm that the new password has been saved. To assign the password for the second hard disk (Drive1), go to the Drive1 area and select the eld Set Master Password, then proceed in exactly the same way as for setting up the password for the rst hard disk (Drive0). The eld Password Entry on Boot is set to Enabled by default. You can exit the BIOS Setup once you have nished changing the settings. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The notebook reboots and your hard disk is now protected with a password. The system will ask you to enter the password when the notebook is restarted again.
Deactivating hard disk protection

To cancel a password without setting a new one, proceed as follows: Call up the BIOS Setup and select the Security menu. Mark the Hard Disk Security eld and press the Enter key. In the Drive0 area mark the Set Master Password eld and press the Enter key. You will be initially requested to enter the old password by the Enter current Password prompt. You will then be requested to enter a new password by the Enter new Password prompt. After entering the password, press the Enter key three times. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The notebook reboots, and password protection for the hard disk is cancelled. To cancel the password for the second hard disk (Drive1), go to the Drive1 area and select the eld Set Master Password, then proceed in exactly the same way as for cancelling the password for the rst hard disk (Drive0).
54
Security functions
Boot from Removable Media

With this BIOS feature, you can manage/control unauthorised booting of an operating system from external media (e.g. USB stick, USB CD-ROM drive etc.) We recommend that you congure the hard disk as the rst boot medium in order to prevent access to your system by boot CDs and bootable media. The condition for this BIOS feature is that you have assigned at least the supervisor password.
Call up the BIOS Setup and select the Security menu. Highlight the Boot from Removable Media eld and press the Enter key. Select the entry All (if you want everyone to be allowed to boot) or Supervisor Only (if you only want the supervisor to be authorised to do this) and press the Enter key. If you do not want to change any other settings you can exit the BIOS Setup. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The notebook will restart and the settings will be adopted.
Owner Information (device-dependent)

The BIOS feature Owner Information enables you to enter up to 80 characters of text which is displayed in the bottom left corner of the screen before the operating system boots up. You could use this feature for example to put your name and telephone number on the notebook in case it is lost or stolen. Requirements: You have been assigned at least the supervisor password. In the BOOT menu, the Boot time diagnostic screen option is set to enabled.
Call up the BIOS Setup and select the Security menu. Highlight the Owner Information eld and press the Enter key. Add the text you would like to enter under Set Owner Information. Setup Notice: Changes have been saved is displayed to conrm that the text has been saved. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The notebook will restart and the Owner Information will be adopted.
55
Security functions
Virus Warning (device-dependent)

This eld checks the boot sectors of the hard disk drive to see if any changes have been made since the previous system start-up. If the boot sector has been changed since the previous system start-up (e.g. new operating system or virus attack), a warning is displayed on the screen. The warning will stay on the screen until you acknowledge the changes by clicking on Conrm or until you set the Virus Warning function to Disabled. If the boot sectors have been changed and the reason for this is unknown, a programme for nding computer viruses should be loaded. Such a change is not only caused by viruses, but also by the boot manager. This function does not replace proper anti-virus software. No supervisor password is required to set it up. Call up the BIOS Setup and select the Security menu. Highlight the Virus Warning eld and press the Enter key. Select Enabled to activate the Virus Warning function. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. The notebook will restart and the settings will be adopted.
56
Security functions
SmartCard reader
Securityfunctions Securityfunctions,
Depending on the device conguration level, your notebook is equipped with a SmartCard reader.
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers. With the appropriate software you can use your SmartCard as an alternative to password protection, but also as a digital signature, for encrypting your e-mails or for home banking. We recommend that you always use two SmartCards. Always keep one of the SmartCards in a safe place if you are carrying the other SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu Technology Solutions. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard. In order to maximise your security, the CardOS SmartCard is disabled if three incorrect attempts are made to enter the PIN. When you use the CardOS SmartCard for the rst time, you will either need to enter the preset PIN "12345678" or the PIN given to you by your systems administrator.
Inserting the SmartCard

Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard reader.
Slide the SmartCard into the SmartCard reader with the chip downwards and towards the front.
57
Security functions
Trusted Platform Module (TPM) (device-dependent)

To use the TPM, you must activate the TPM in the BIOS Setup before the software is installed. The condition for this is that you have assigned at least the supervisor password (see "Security functions", Page 50).
Trusted Platform Module TPM
Enabling TPM
Requirement: You have assigned a supervisor password, see "Security functions", Page 50. Call up the BIOS Setup and select the Security menu. Mark the TPM Security Chip Setting eld and press the Enter key. Select Enabled to activate the TPM. Once you have activated the TPM the Clear Security Chip option appears. Select Clear Security Chip to delete the holder in the TPM. By clicking on Enabled, all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys etc.) generated by applications are deleted. Please note that you will then no longer be able to access the data you have encrypted with the keys based on that holder. Select the Exit Saving Changes option in the Exit menu. Press the Enter key and select Yes. The notebook will restart, and TPM will be enabled after the reboot.
Disabling TPM
Requirement: You have assigned a supervisor password, see "Security functions", Page 50. Call up the BIOS Setup and select the Security menu. Mark the TPM Security Chip Setting eld and press the Enter key. Select Disabled to deactivate the TPM. From the Exit menu, choose the option Exit Saving Changes. Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled.
58
Connecting external devices

Always refer to the safety information provided in "Important notes", Page 12 before connecting or disconnecting any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug. Follow the steps below in order, when connecting or disconnecting devices to your notebook: With some devices such as USB devices, it is not necessary to switch off the notebook and the device before connecting/disconnecting. For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Connecting devices to the notebook 1. 2. 3. 4.
Peripheraldevices Devices
Turn off your notebook and all external devices. Unplug your notebook and all devices from the mains sockets. Connect the cables for your external devices following the instructions. Plug all power cables into the mains sockets.
Disconnecting devices from the notebook 1. Turn off your notebook and all external devices. 2. Unplug your notebook and all devices from the mains sockets. 3. Disconnect the cables for your external devices following the instructions.
Peripheraldevices Devices
59
Connecting an external monitor

An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to the DisplayPort or to the DVI-D monitor port on the optional Port Replicator. Monitor output is limited to a maximum of two monitors at any one time (see "Key combinations", Page 24, section "Toggle output monitor").
VGAconnection socket Monitor Monitorport
Digital DisplayPort
Analogue VGA monitor port
Digital DVI-D monitor port (on the optional Port Replicator) Switch off the notebook and the external monitor. Plug the data cable of the external monitor into the monitor port. First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page 24. You can display the same picture on the external monitor and the notebook LCD monitor simultaneously.
60
Connecting external devices to the serial port

Devices Externaldevices Serialport Parallelport
If you wish to operate devices via a serial port, then use the Port Replicator which is available as an option for your notebook.
External devices (e.g. a printer or modem) can be connected to the serial port. Connect the data cable to the external device. Connect the appropriate data cable for the device to the serial port. For an exact description of how to connect external devices to the corresponding port, please see the external device documentation.
Port settings
Serialport, Parallelport
You can change the port settings (e.g. address, interrupt) in the BIOS Setup.
Device drivers
Device drivers, drivers
Devices connected to the serial port require drivers. Your operating system already includes many drivers. If the required driver is missing then it will be necessary to install it. Up-to-date drivers are usually available on the Internet or will be supplied with the device on a data carrier.
61
Connecting USB devices

USBports
On the USB ports, you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem). USB devices are hot-pluggable. This means you can connect and disconnect devices while your operating system is running. USB 1.x has a maximum data transfer rate of 12 Mbit/s. USB 2.0 has a data transfer rate of up to 480 Mbit/s. USB 3.0 has a data transfer rate of up to 5 Gbit/s. Additional information can be found in the documentation for the USB devices. Connect the data cable to the external device. Connect the data cable to a USB port of the notebook.
Device drivers USB devices will be automatically recognised and installed by your operating system.
62
Connecting an external SATA hard disk (eSATA)

An external SATA hard disk can be connected at the eSATA port. This allows you to expand the internal hard disk capacity as you wish. The length of the eSATA cable must not exceed 2 metres. Consult a specialist dealer for advice on which eSATA data cable is suitable for your external eSATA hard disk. Make sure that the hard disk has its own external power supply. The data transfer rate is up to 2,400 Mbit/s. Connect the data cable to the external device. Connect the data cable to the eSATA port.
eSATA
Device drivers The eSATA hard disk is automatically recognised by your operating system and installed.
You will nd more information in the documentation for the external SATA hard disk and the operating system.
Safe removal of eSATA and USB devices

Always correctly remove the device according to the rules described below, to ensure that none of your data is lost.
Left-click on the symbol to remove hardware safely. Select the device you wish to shut down and remove. Press the "Enter" key. Wait for the dialogue box which tells you that it is now safe to remove the device.
63
Connecting external audio devices

Microphone port/Line In
Microphone,connecting Audioports Audiodevices,connecting
The microphone port/Line In allows you to connect an external microphone, a MiniDisc player, MP3 player, CD player or a tape deck to your notebook. Connect the audio cable to the external device. Connect the audio cable to the microphone port/Line In of the notebook.
Headphone port
Connectingaudio devices Connectingheadphones Audioports
You can connect headphones or external loudspeakers to your notebook via the headphone port. Connect the audio cable to the external device. Connect the audio cable to the headphone port of the notebook. The internal loudspeakers are disabled.
If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug".
64
Removing and installing components during servicing

Only qualied technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, re risk) and will invalidate your warranty.
Servicing Components
After consulting the Hotline/Service Desk, you may remove and install the components described in this chapter yourself. If you remove and install components without consulting the Hotline/Service Desk, then the warranty of your notebook will be voided.
Notes on installing and removing boards and components

Switch the notebook off and pull the power plug out of the mains socket. Always remove the battery. Take care when you use the locking mechanisms on the battery and any other component. Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers. Boards with electrostatic sensitive devices (ESD) are marked with the label shown. When handling boards tted with ESDs, you must always observe the following points: You must always discharge static build up (e.g. by touching a grounded object) before working. The equipment and tools you use must be free of static charges. Remove the power plug from the mains supply before inserting or removing boards containing ESDs. Always hold boards with ESDs by their edges. Never touch pins or conductors on boards tted with ESDs.
ESD Board Notes
65
Preparing to remove components

If you are going to remove or change system components, prepare for the removal as follows: Please observe the safety information in chapter "Important notes", Page 12. Remove the power plug from the mains outlet !
Switch the device off. The device must not be in energy-saving mode !
Close the LCD screen. Remove all the cables from the device. Turn the device over and place it on a stable, at and clean surface. If necessary, lay an anti-slip cloth on this surface to prevent the device from being scratched. Remove the battery (see "Removing a battery", Page 32).
Installing and removing memory expansion

Removing Mainmemory Memorymodule System expansion memory
If you are asked by the Hotline/Service Desk to remove and install the memory expansion yourself, proceed as follows: Please observe the safety information in chapter "Important notes", Page 12. When installing/removing memory modules, the battery must be removed from the notebook and the notebook must not be connected to the power supply, see "Preparing to remove components", Page 66. Only use memory expansion modules that have been approved for your notebook (see "Technical data", Page 82). Never use force when installing or removing a memory extension. Make sure that foreign objects do not fall into the memory extension compartment. You must open the service compartment to remove or install a memory module. On some devices, opening the compartment may expose other components. These components should be removed and replaced only by authorised specialists. Therefore, be sure to observe the following: Individual components can become very hot during operation. Therefore, we recommend that you wait one hour after switching off the notebook before removing or installing memory modules. Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page 65.
66
Removing a cover
1
2
Remove the screw (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separate from each other. If you install the wrong screws, components may be damaged. Lift the cover off the notebook (2).
Removing memory modules

3 2 1
Carefully push the two mounting clips outwards (1). The memory module snaps upwards (2). Pull the memory module out of its slot in the direction of the arrow (3).
Memory module expansion
67
Installing a memory module

2
Insert the memory module with the contacts and the recess (a) facing the slot (1). Carefully push the memory module downwards until you feel it click into place (2).
Memory module expansion
Attaching the cover
2
1
Place the cover in the correct slot (1). If you remove more than one component at the same time, keep the screws for the individual components separate from each other and make sure that you use the correct screws. If you install the wrong screws, components may be damaged. Tighten the screw (2).
68
Removing and installing the hard disk

Removing a cover
Remove the battery (see Chapter "Removing a battery", Page 32).
Remove the screw (1). Keep the screws in a safe place. If you are removing more than one component at the same time, store the screws for the individual components separately from each other. If you install the wrong screws, components may be damaged. Lift the cover off the notebook (2).
69
Removing a hard disk
Turn down the protective lm in the direction of the arrow (1).
Remove the hard disk from the hard disk compartment (1).
70
Installing a hard disk
Place the hard disk into the hard disk compartment (1).
Fold the protective lm onto the hard disk in the direction of the arrow (2).
71
Attaching the cover

2
Place the cover in the correct mounting position (1). If you remove more than one component at the same time, keep the screws for the individual components separately from each other and make sure that you use the correct screws. If you install the wrong screws, components may be damaged. Tighten the screw (2). Insert the battery (see Chapter "Installing a battery", Page 32).
Finishing component removal

After you have removed or changed the system components as you required, please prepare your device for operation again as follows: Install the battery again (see "Installing a battery", Page 32). Turn the notebook the right way up again and place it on a at surface. Reconnect the cables that you disconnected before.
72
Settings in BIOS Setup Utility

System Setup Hardwarecon BIOS Con guration,BIOSSetupUtility SetupUtility con settings,BIOSSetupUtility guration guration
The BIOS Setup Utility allows you to set the system functions and the hardware conguration for the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility. The BIOS Setup Utility program contains the following menus: About System Advanced Security Boot Exit Displays information relating to the BIOS, processor and notebook Advanced system settings Conguration of various hardware components, such as mouse, keyboard, processor Password settings and security functions Conguration of the start-up sequence Exits the BIOS Setup Utility
Starting the BIOS Setup Utility

Reboot the device (switch off/on or reboot the operating system). The following or a similar display appears on the screen at start-up: <F2> BIOS Setup <F12> Boot Menu
BIOSSetupUtility
Press the function key F2 . If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre.
The BIOS Setup Utility starts.
Operating BIOS Setup Utility

BIOS SetupUtility
Press the F1 key to display help on the operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. Use the cursor keys or to select the menu you wish to access to make changes. The menu is displayed on the screen. Select the option you want to change with the cursor keys or . Press the Enter key. Press the ESC key to exit the selected menu. For future reference, make a note of the changes you have made (for example, in this manual).
73
Exiting BIOS Setup Utility

BIOS SetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility
To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes. The notebook is rebooted and the new settings come into effect.
Exit Discarding Changes Discard changes and exit BIOS Setup Utility
To discard the changes, select Exit Discarding Changes and Yes. The settings in place when BIOS Setup Utility was called remain effective. BIOS Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaults Copy Standard Entries

To copy the standard entries for all menus of the BIOS Setup Utility, choose Load Setup Defaults and Yes.
Discard Changes Discard changes without exiting the BIOS Setup Utility
To discard the changes you have made, select Discard Changes and Yes. The settings in place when BIOS Setup Utility was called remain effective. You can now make additional settings in the BIOS Setup Utility. If you want to exitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Changes - save changes without exiting the BIOS Setup Utility
To save the changes, select Save Changes and Yes. The changes are saved. You can now make additional settings in the BIOS Setup Utility. If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off

To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down.
74
Troubleshooting and tips

Fault Tips Troubleshooting
Follow the safety notes in the "Safety/Regulations" manual when connecting or disconnecting cables.
If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. Switch the notebook off. Please contact the Hotline/Service Desk. You can nd the telephone numbers in the service desk list. Please have the following information ready when you call: The model name and serial number of the notebook. The serial number is located on a sticker on the underside of the notebook. Notes of any messages that appear on the screen and information on acoustic signals. Any changes you have made to the hardware or software since receiving the notebook. Any changes you have made to the BIOS Setup settings since receiving the notebook. Your system conguration and all peripheral devices connected to your system. Your sales contract.
Our notebooks have been designed primarily with mobile applications in mind. This means that considerable effort has been made to optimise components and equipment in terms of weight, space and energy requirements. Depending on the particular conguration you have purchased, it is possible that functionality may be slightly reduced compared to a desktop PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://ts.fujitsu.com/support/downloads.html"
Help if problems occur

Should you encounter a problem with your computer that you cannot resolve yourself: Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. For further clarication of the problem, contact the Help Desk for your country (see the Help Desk list or visit the Internet at "http://ts.fujitsu.com/support/servicedesk.html"). When you do this, please have ready the ID number and serial number of your system.
75
Restoring the hard disk contents under Windows

Operatingsystem,restoring Harddisk:
You can use the "Windows Recovery CD" (optionally available) and the "Drivers & Utilities CD/DVD" to reinstall the operating system. The instructions are provided on the case of the Recovery CD. During the reinstall process your personal les and any installed programs will be deleted. We advise you to backup your les to an external hard drive, or CD / DVD disk before you start. Switch the notebook on. The following display briey appears on the screen during start-up: <ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup When this message appears, press the function key F12 . Insert the "Windows Recovery CD" into the optical drive. Select CD-ROM and press the Enter key. Follow the instructions on the screen. After the installation you must install all the drivers again. Some installed hardware components will not be correctly supported until this has been done. Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD starts automatically. Click on the Desk Update button. Select Automatic driver installation (Express) and click on Start installation. Follow the instructions on the screen. Restart your notebook when the driver installation is completed.
The notebooks date or time is incorrect

Summer Buffer Dateisincorrect Incorrectdate/time Timenotcorrect Time,daylightsavings battery,load time
Cause Time and date are incorrect. If the time and date are still set incorrectly after switching on the notebook.
Troubleshooting With the BIOS-Setup-Utility, you can set the date and time in the main menu. Please contact your sales outlet or our Hotline/Service Desk.
The notebooks LCD screen remains blank

LCDscreenistoodark LCDscreen
Cause Monitor is switched off. External monitor or television set connected.
Troubleshooting Press a key or touch the touchpad. Press the key combination to switch the screen output, see "Key combinations", Page 24.
76
The LCD screen is diff cult to read

LCDscreen
Cause Reected glare
Troubleshooting Turn the notebook or alter the tilt of the LCD screen. Increase the brightness of the screen.
The external monitor remains blank

Monitor
Cause Monitor is switched off. Power saving has been activated (monitor is blank). Brightness is set to dark. Screen output is set to the notebooks LCD screen The external monitors power cable or data cable is not connected properly.
Troubleshooting Switch the external monitor on. Press any key to continue. Adjust the brightness of the monitor. Press the key combination to switch the screen output, see "Key combinations", Page 24. Switch off the external monitor and the notebook. Check whether the power cable is plugged properly into the external monitor and into the power socket. Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). Switch on the external monitor and the notebook.
The external monitor is blank or the image is unstable

Monitor Screen
Cause The wrong external monitor has been selected or the wrong screen resolution has been set for the application program.
Troubleshooting Terminate the application program in Windows by pressing Alt + F4 . If the fault persists after closing the program, use the key combination for switching the screen output (see "Key combinations", Page 24) to switch over to the notebooks LCD screen. Change the following setting: Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system.
77
The notebook cannot be started

Notebook
Cause The battery is not installed correctly.
Troubleshooting Check whether the battery is installed correctly in its compartment. Switch the notebook on. Charge the battery. or or Insert a charged battery.
The battery is dead.
The power adapter is not connected correctly.
Connect the mains adapter to the notebook. Check whether the mains adapter is connected correctly to the notebook. Switch the notebook on.
The notebook stops working

Energysaving mode Notebook
Cause Notebook is in energy saving mode. An application programme has caused the malfunction.
The battery is dead.
Troubleshooting Leave energy saving mode. Close the application program or restart the notebook (by restarting the operating system or switching the device off and back on again). Charge the battery. or or Insert a charged battery. Connect the mains adapter to the notebook.
78
The printer does not print

Printer doesnotprint
Cause The printer is not switched on.
The printer is not connected correctly.
The printer driver is faulty or not correctly installed, or it is the wrong printer driver.
Troubleshooting Make sure that the printer is switched on and ready for operation (refer to the documentation supplied with the printer). Check that the data cable connecting the notebook to the printer is properly connected. Check that the data cable connecting the notebook to the printer is properly connected. Check whether the correct printer driver is loaded (refer to the printer documentation).
The radio connection to a network does not work

Theradioconnectiontoanetwork does notwork
Cause The wireless component is disabled.
The wireless component is enabled. Despite this, the wireless connection to a network does not work.
Troubleshooting Switch the radio component on (see "Switching the wireless components on and off", Page 44). Check whether the radio connection is switched on via the software. Further information on using the radio component can be found in the help les.
Acoustic warnings
Acoustic error messages Errors
Cause A beep sounds every few seconds. The battery is almost at.
Troubleshooting Charge the battery.
79
Error messages on the screen

Error messages message: onthescreen
This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service centre.
Error message/cause CMOS battery bad If the error message occurs repeatedly, the buffer battery in the notebook is at. System CMOS checksum bad - default conguration used
Resolution Contact your sales outlet or our customer service centre.
Switch the notebook off. Switch the notebook on. The system conguration information is Press the function key F2 to access the incorrect. BIOS Setup. In the BIOS Setup, select the Exit menu. Select the entry Load Setup Defaults. Select OK and press the Enter key. Extended memory failed at offset: xxxx Failing Bits: Check whether the additional memory zzzz zzzz module has been inserted correctly. When testing the extended memory an error has resulted at the address xxxx. Failure Fixed Disk n Start the BIOS Setup (Primary Master submenu) and select the correct settings. The settings of the hard disk drive are incorrect. Keyboard controller error Switch the notebook off with the ON/OFF switch. Wait 3 - 5 seconds and switch on the notebook again. Keyboard error If you are using an external keyboard: Check the connection and reboot the notebook. Make sure that no key is pressed. Check in the BIOS Setup whether your hard disk has been set correctly. Make sure that the operating system is installed on the corresponding drive. Press the F1 function key to start the operating system. Press the function key F2 to access the BIOS Setup.
nn Stuck key Operating system not found
Press <F1> to resume, <F2> to SETUP This error message appears if an error occurs during the self-test before starting the operating system.
80
Error message/cause Resolution Previous boot incomplete - Default conguration Press the F1 function key when prompted used Due to an error during the previous system to do so. boot, default values were used for certain settings. Check the settings in the BIOS Setup. Real time clock error Contact your sales outlet or our customer service centre. nnnnK Shadow RAM failed at offset: xxxx Failing Contact your sales outlet or our customer Bits: zzzz service centre. System battery is dead - Replace and run SETUP Contact your sales outlet or our customer service centre. System cache error - Cache disabled Contact your sales outlet or our customer service centre. System timer error Contact your sales outlet or our customer service centre.
81
Technical data
Technical data
Notebook
Technicaldata
Processor Main memory
Intel Core i5, i7 and i7 Extreme Edition DualCore systems 16 Gbyte DDR3 SDRAM 2 slots that accept 2, 4 or 8 Gbyte modules QuadCore systems 32 Gbyte DDR3 SDRAM 2 slots that accept 2, 4 or 8 Gbyte modules Second battery Second hard disk drive Optical drive (Blu-Ray RE, Super Multi) Weight Saver
Possible modules
Electrical data Safety regulations complied with Protection class Maximum power consumption (notebook switched on with battery charging) LCD monitor Display diagonal Display adapter Chip Video memory (VRAM) Audio Sound chip Dimensions Width x depth x height (without/with rubber feet)
CE, CE!, EN55022, EN55024, EN301489, EN300328, EN301893, UL NoA, CB, EN50371 II 150 W
15.6 inch/39.62 cm TFT FHD (1920 x 1080), 15.6 inch/39.62 cm TFT HD+ (1600 x 900), 16 million colours NVIDIA Quadro K1000M, Quadro K2000M 2 Gbyte GDDR3 Realtek ALC 269 379,8 mm x 257,0 mm x 35,5/36,5 mm
Weight with Weight Saver about 2.8 kg with 6-cell battery Input devices Keyboard 102 keys Touchpad 1 touchpad, 3 touchpad keys TouchStick 1 TouchStick Slots ExpressCard slot 1 x ExpressCard/34 Memory card slot SD Card, Memory Stick Duo , Memory Stick Pro Duo
82
Technical data
Slots SIM card slot Ports VGA monitor port Display port LAN port Microphone port/Line In Headphones port/Line Out eSATA port USB port Docking port Ambient conditions Environment class 3K2 Mechanical class 7M2 Temperature Operation Transportation
1x 15-pin socket 20-pin socket RJ45 socket 3.5 mm mono mini-jack 3.5 mm stereo mini jack 1 x USB combination port (USB 2.0) 2 x USB 3.0, 1 x USB 3.0 Anytime USB charge 1x DIN IEC 721 DIN IEC 721 5 ... 35 -15 ... 60
Rechargeable battery
You can nd information on the batteries used in your device at "http://ts.fujitsu.com/support".
Rated voltage Rated capacity
6-cell rechargeable battery 10.8 V 72 Wh
Mains adapter 150W

Technicaldata
Rated voltage Max. rated current
100 V to 240 V (automatic) 7.89 A
An additional mains adapter or power cable can be ordered at any time.
83
Technical data
Port Replicator (optional)

Electrical data Safety regulations complied with Protection class Dimensions/weight Width x depth x height (front/back) Weight Ports LAN port VGA port DisplayPort Serial port Microphone port Headphones port USB port eSATA port Docking port Ambient conditions Environment class DIN IEC 721 Mechanical class DIN IEC 721 Temperature: Operation Transportation CE, CB II 353 mm x 138 mm x 10/36 mm approx. 690 g RJ45 socket 15-pin socket 20-pin socket 9-pin connector 3.5 mm mono mini-jack 3.5 mm mono mini-jack 3x USB 3.0, 1x USB 3.0 Anytime USB charge 1x 144-pin 3K2 7M2
5 C ... 35 C -15 C ... 60 C
84
Manufacturers notes
Manufacturers notes
Energy Star
Products which are Energy Star certicated and labelled always meet the full requirements of the standard when shipped. Please note that installation of after-market hardware and software, changes to the BIOS or to the power options may affect power consumption. The properties guaranteed by the Energy Star label can then no longer be guaranteed. Devices which are certied according to the Energy Star environmental mark help to save money and reduce the emission of greenhouse gases. Power Management settings on delivery: Monitor switched off after < 15 minutes of inactivity Automatic activation of energy saving mode (ACPI S3): < 30 minutes of inactivity Detailed information about the requirements of the "Energy Star" environmental mark and the products which satisfy these requirements can be found on the Internet at "https://www.energystar.gov/".
Disposal and recycling

Notes
Information about this subject can be found on your notebook or on our Internet pages.
Declarations of Conformity
Declarationofconformity
The "Declarations of Conformity" for the device can be found at our Internet address under: "http://ts.fujitsu.com/ce". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
85
Manufacturers notes
CE marking
CEmarking
CE marking for devices with radio component This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity. This equipment can be used in the following countries: Belgium Bulgaria Denmark Germany Estonia Finland France Greece UK Ireland Iceland Italy Latvia Liechtenstein Lithuania Luxembourg Malta The Norway Austria Netherlands Poland Portugal Rumania Sweden Switzerland Slovakia Slovenia Spain Hungary Czech Republic Cyprus Contact the corresponding government ofce in the respective country for current information on possible operating restrictions. If your country is not included in the list, then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country.
Regulatory notices
If there is no FCC logo and also no FCC ID on the device then this device is not approved by the Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.
Regulatory information for notebooks without radio device

Regulatoryinformation
NOTICE: Changes or modications not expressly approved by Fujitsu Technology Solutions could void this users authority to operate the equipment. Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
86
Manufacturers notes
Connect the equipment into an outlet that is on a different circuit than the receiver. Consult the dealer or an experienced radio/TV technician for help. Notice to Users of the US Telephone Network Your notebook may be supplied with an internal modem which complies with Part 68 of the FCC rules. On this notebook is a label that contains the FCC Registration Number and the Ringer Equivalence Number (REN) for this equipment among other information. If requested, the user must provide their telephone company with the following information: 1. The telephone number to which the notebook is connected. 2. The Ringer Equivalence Number (REN) for this equipment. 3. The equipment requires a standard modular jack type USOC RJ-11C which is FCC Part 68 compliant. 4. The FCC Registration Number. This equipment is designed to be connected to the telephone network or premises wiring using a standard modular jack type USOC RJ-11C which is FCC Part 68 compliant and a line cord between the modem and the telephone network with a minimum of 26AWG. The REN is used to determine the number of devices that you may connect to your telephone line and still have all of those devices ring when your number is called. Too many devices on one line may result in failure to ring in response to an incoming call. In most, but not all, areas the sum of the RENs of all of the devices should not exceed ve (5). To be certain of the number of devices you may connect to your line, as determined by the RENs, contact your local telephone company. If this equipment causes harm to the telephone network, your telephone company may discontinue your service temporarily. If possible, they will notify you in advance. If advance notice is not practical they will notify you as soon as possible. You will also be advised of your right to le a complaint with the FCC. This fax modem also complies with fax branding requirements per FCC Part 68. Your telephone company will probably ask you to disconnect this equipment from the telephone network until the problem is corrected and you are sure that the equipment is not malfunctioning. This equipment may not be used on coin-operated telephones provided by your telephone company. Connection to party lines is subject to state tariffs. Contact your states public utility commission, public service commission or corporation commission for more information. This equipment includes automatic dialing capability. When programming and/or making test calls to emergency numbers: Remain on the line and briey explain to the dispatcher the reason for the call. Perform such activities in off-peak hours, such as early morning or late evening. FCC rules prohibit the use of non-hearing aid compatible telephones in the following locations or applications: All public or semi-public coin-operated or credit card telephones. Elevators, highways, tunnels (automobile, subway, railroad or pedestrian) where a person with impaired hearing might be isolated in an emergency. Places where telephones are specically installed to alert emergency authorities such as re, police or medical assistance personnel. Hospital rooms, residential health care facilities, convalescent homes and prisons. Hotel, motel or apartment lobbies. Stores where telephones are used by patrons to order merchandise.
87
Manufacturers notes
Public transportation terminals where telephones are used to call taxis or to reserve lodging or rental cars. In hotel and motel rooms as at least ten percent of the rooms must contain hearing aid-compatible telephones or jacks for plug-in hearing aid compatible telephones which will be provided to hearing impaired customers on request.
DOC (Industry CANADA) notices

DOC(INDUSTRYCANADA)NOTICES
Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations. CET appareil numrique de la class B respecte toutes les exigence du Rglement sur le matrial brouilleur du Canada. Notice to Users of the Canadian Telephone Network NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specications. This is conrmed by the registration number. The abbreviation, IC, before the registration number signies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specications were met. It does not imply that Industry Canada approved the equipment. Before connecting this equipment to a telephone line the user should ensure that it is permissible to connect this equipment to the local telecommunication facilities. The user should be aware that compliance with the certication standards does not prevent service degradation in some situations. Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line. NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 0.0. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed ve. CAUTION: For safety, users should ensure that the electrical ground of the power utility, the telephone lines and the metallic water pipes are connected together. Users should NOT attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician. This may be particularly important in rural areas. Avis Aux Utilisateurs Du Rseau Tlphonique Canadien AVIS : Le prsent matriel est conforme aux spcications techniques dIndustrie Canada applicables au matriel terminal. Cette conformit est conrme par le numro denregistrement. Le sigle IC, plac devant le numro denregistrement, signie que lenregistrement sest effectu conformment une dclaration de conformit et indique que les spcications techniques dIndustrie Canada ont t respectes. Il nimplique pas quIndustrie Canada a approuv le matriel.
88
Manufacturers notes
Avant de connecter cet quipement une ligne tlphonique, lutilisateur doit vrier sil est permis de connecter cet quipement aux installations de tlcommunications locales. Lutilisateur est averti que mme la conformit aux normes de certication ne peut dans certains cas empcher la dgradation du service. Les rparations de lquipement de tlcommunications doivent tre effectues par un service de maintenance agr au Canada. Toute rparation ou modication, qui nest pas expressment approuve par Fujitsu, ou toute dfaillance de lquipement peut entraner la compagnie de tlcommunications exiger que lutilisateur dconnecte lquipement de la ligne tlphonique. AVIS : Lindice dquivalence de la sonnerie (IES) du prsent matriel est de 0.0. LIES assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccords une interface tlphonique. La terminaison dune interface peut consister en une combinaison quelconque de dispositifs, la seule condition que la somme dindices dquivalence de la sonnerie de tous les dispositifs nexcde pas 5. AVERTISSEMENT: Pour assurer la scurit, les utilisateurs doivent vrier que la prise de terre du service dlectricit, les lignes tlphoniques et les conduites deau mtalliques sont connectes ensemble. Les utilisateurs NE doivent PAS tenter dtablir ces connexions eux-mmes, mais doivent contacter les services dinspection dinstallations lectriques appropris ou un lectricien. Ceci peut tre particulirement important en rgions rurales. UL Notice This unit requires an AC adapter to operate. Only use a UL Listed Class 2 adapter. The correct output rating is indicated on the AC adapter label. Refer to the illustration below for the correct AC Adapter output polarity:
CAUTION: To reduce the risk of re, use only 26AWG or larger telecommunications line cord. For Authorized Repair Technicians Only CAUTION: For continued protection against risk of re, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturers instructions.
89
Manufacturers notes
FCC regulatory information for notebooks with radio device

Regulatoryinformation
Federal Communications Commission statement This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Please note the following regulatory information related to the optional radio device. FCC Radio Frequency Exposure statement This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. The radiated output power of this radio device is far below the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation is minimized. When using this device, a certain separation distance between antenna and nearby persons must be maintained to ensure RF exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm (8 inches). Regulatory Notes and Statements Radio device, health and authorisation for use Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Radio devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of the radio devices may be restricted in some situations or environments, such as: on board an airplane, or in an explosive environment, or in situations where the interference risk to other devices or services is perceived or identied as harmful. In cases in which the policy regarding use of radio devices in specic environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment.
90
Manufacturers notes
Regulatory Information/Disclaimers Installation and use of this radio device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modications made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modication of this device, or the substitution or attachment of connecting cables and equipment other than those specied by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modication, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules, as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modications not expressly authorised by Fujitsu Technology Solutions may invalidate the users right to operate this equipment.
91
Index
Index
A Acoustic error messages 79 Alt + Tab 25 Anti-theft protection 51 Application keys 26 Audio devices, connecting 64 Audio ports 64 B Back tab 25 Backspace 23 Bass loudspeaker (subwoofer) 42 Battery battery life 30 caring for and maintaining 31 charge level 31, 38 charging 31 self-discharge 31 storage 31 Battery status meter 31 BIOS Setup Utility calling 73 exiting 74 operating 73 protecting with password 52 settings 73 Bluetooth Switching off module 44 Switching on module 44 Bluetooth, safety notes 12 Board 65 Buffer battery, load 76 Buttons 22 C Caps Lock 23 indicator 20 CD/DVD indicator 20, 35 CD/DVD: manual emergency removal 36 CE marking 86 Charging capacity, battery 31 Cleaning 14 Components installing / removing 65 Conguration, BIOS Setup Utility 73 Connecting audio devices 64 Connecting headphones 64 Crystal View display cleaning 14 Ctrl+Alt+Del 25 Ctrl+C 25 Cursor control keys Cursor keys 23 23
D Date is incorrect 76 Declaration of conformity 85 Device setting up 16 Device drivers Parallel port 61 Device drivers, Serial port 61 Devices connecting 59 Connecting 61 disconnecting 59 DOC (INDUSTRY CANADA) NOTICES Drive Removing 33 E Emergency removal of data carrier 36 Energy energy saving 13 Energy saving 13 Energy saving mode leaving 78 Enter 23 Enter key 23 Error message: on the screen 80 Error messages on the screen 80 Errors Acoustic warnings 79 ESD 65 Ethernet LAN 45 ExpressCard 40 External devices Connecting 61 F Fault correction 75 Fingerprint sensor 50 congure 50 First-time setup 15 Fn + F10 25
88
92
Index
Fn Fn Fn Fn Fn Fn Fn
+ F3 24 + F4 24 + F6 24 + F7 25 + F8 25 + F9 25 key 23
G Getting started
15
H Handling data carriers 34 Hard disk: restoring the contents 76 Hardware conguration 73 I Important notes 12 Incorrect date/time 76 Indicator Caps Lock 20 CD/DVD 20 Num Lock 20 Power-on indicator 18 Scroll Lock 20 Inserting a data carrier 35 K Keyboard 22 cleaning 14 L LCD screen cleaning 14 difcult to read 77 notes 29 reected glare 77 remains blank 76 LCD screen is too dark Life, battery 30 Line feed 23 Loudspeakers 42 disable 24 enable 24 M Main memory
see Adding memory 66 Mains adapter connecting 16 setting up 16 Manual removal of data carrier 36 Mechanical backup 51 Memory card handling 39 inserting 39 removing 40 Memory expansion installing 68 removing 67 Memory module important notes 66 installing 68 removing 67 Microphone 42 Microphone, connecting 64 Mobile operation 13 Module Removing 33 Module bay 33 Modules 33 Monitor connecting 60 drifting display 77 remains blank 77 Monitor port see VGA connection socket 60 N Notebook before you travel 13 cannot be started 78 cleaning 14 stops working 78 switching off 21 transporting 1314 using 18 Notebook, operation 18 Notes 12 boards 65 cleaning 14 disposal / recycling 85 energy saving 13 LCD screen 29 Safety 12 transport 13 Num Lock indicator 20, 24 Numeric keypad 22 see Separate numeric keypad
76
24
93
Index
O Operating system activating system protection 53 cancel system protection 53 protecting with password 53 Operating system, restoring 76 Optical drive 34 P Packaging 15 Parallel port 61 Connecting devices 61 Settings 61 Password changing 52 entering 52 removing 53 Password protection 51 Password protection: hard disk 54 Peripheral devices connecting 59 disconnecting 59 Port Replicator Connecting a notebook 47 Power power consumption 38 power-management features Power-on indicator 18 Preparing for operation 16 Printer does not print 79
38
R Radio component: safety notes 12 Rechargeable battery 30 see Battery 30 Regulatory information notebooks with radio device 90 Notebooks without radio device 86 Removing a data carrier 35 Removing memory see Adding memory 66 Return 23 S Safety notes 12 Screen no screen display Screen brightness
decrease 24 increase 25 Scroll Lock indicator 20 Security functions 50 SystemLock 57 Security functions, SmartCard 57 Security Lock 51 Selecting a location 16 Self-discharge, battery 31 Separate numeric keypad 24 Serial port 61 Connecting devices 61 Serial port, Settings 61 Servicing 65 Setup see BIOS Setup Utility 73 Shift 23 Shift + Tab 25 Shift key 23 Slot ExpressCard 40 Memory cards 39 Start key 23 Status indicator panel 18 Summer time 76 Supervisor password changing 52 entering 52 removing 53 Switching on the notebook 21 Switching on for the rst time 17 System conguration 73 System expansion 66 see Adding memory 66 System settings, BIOS Setup Utility
73
77
T Tab key 23 Technical data Mains adapter 83 notebook 82 The radio connection to a network does not work 79 Time not correct 76 Time, daylight savings 76 Tips 75 Toggle output screen 25
94
Index
Touchpad 28 buttons 28 cleaning 14 disable 24 executing commands 28 moving the pointer 28 selecting an item 28 TPM 58 Transport Transport damage 15 Transportation 1314 Travel, notebook 13 Troubleshooting 75 Trusted Platform Module 58 U USB ports 62 User password changing 52 entering 52 removing 53
Using the Kensington Lock Cable V VGA connection socket Volume decrease 25 increase 25 Volume control 42
51
60
W Webcam 30 Weight Saver Removing 33 Wireless LAN Switching off module 44 Switching on module 44 Wireless LAN: safety notes 12
95

Celsius H720

Uploaded by

Copyright:

Available Formats

Celsius H720

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Celsius H720

Uploaded by

Copyright:

Available Formats

Operating Manual

Congratulations, you have decided to buy an innovative Fujitsu product.

Fujitsu Technology Solutions

Fujitsu Technology Solutions

Fujitsu Technology Solutions

Fujitsu Technology Solutions

Fujitsu Technology Solutions

This font This font

Fujitsu Technology Solutions

Ports and operating elements

Ports and operating elements

Fujitsu Technology Solutions

Ports and operating elements

5 = Display port 6 = LAN port 7 = DC input connector (DC IN)

Fujitsu Technology Solutions

Ports and operating elements

Fujitsu Technology Solutions

Additional safety notes for devices with radio components

Fujitsu Technology Solutions

Energy saving under Windows

Travelling with your notebook

Before you travel

When travelling in other countries

Fujitsu Technology Solutions

Cleaning the notebook

Ensure that no liquid enters the device.

Fujitsu Technology Solutions

First-time setup of your device

First-time setup of your device

Unpacking and checking the device

Fujitsu Technology Solutions

First-time setup of your device

Mains adapter connecting

Fujitsu Technology Solutions

First-time setup of your device

Switching on the device for the f rst time

Fujitsu Technology Solutions

Working with the notebook

Working with the notebook

Description Power-on indicator

Fujitsu Technology Solutions

Working with the notebook

Fujitsu Technology Solutions

Working with the notebook

Fujitsu Technology Solutions

Working with the notebook

Switching on the notebook

The power-on indicator is lit.

Notebook: switching off

Close the LCD screen.

Fujitsu Technology Solutions

Working with the notebook

Fujitsu Technology Solutions

Working with the notebook

Fujitsu Technology Solutions

Working with the notebook

Separate number block

Loudspeakers Touchpad Fn+F4

Fujitsu Technology Solutions

Working with the notebook