http://freewimaxinfo.com/2g-mobile-technology.

html What is 2G Technology 2G Technology, Second Generation Technology Second generation (2g) telephone technology is based on GSM or in other words global system for mobile communication. Second generation was launched in Finland in the year 1991. How 2G works, Uses of 2G technology (Second Generation technology) 2G network allows for much greater penetration intensity. 2G technologies enabled the various mobile phone networks to provide the services such as text messages, picture messages and MMS (multi media messages). 2G technology is more efficient. 2G technology holds sufficient security for both the sender and the receiver. All text messages are digitally encrypted. This digital encryption allows for the transfer of data in such a way that only the intended receiver can receive and read it. 2G Technologies (Second Generation Technologies) Second generation technologies are either time division multiple access (TDMA) or code division multiple access (CDMA). TDMA allows for the division of signal into time slots. CDMA allocates each user a special code to communicate over a multiplex physical channel. Different TDMA technologies are GSM, PDC, iDEN, iS-136.CDMA technology is IS-95. GSM has its origin from the Group special Mobile, in Europe. GSM (Global system for mobile communication) is the most admired standard of all the mobile technologies. Although this technology originates from the Europe, but now it is used in more than 212 countries in the world. GSM technology was the first one to help establish international roaming. This enabled the mobile subscribers to use their mobile phone connections in many different countries of the worlds is based on d igital signals ,unlike 1G technologies which were used to transfer analogue signals. GSM has enabled the users to make use of the short message services (SMS) to any mobile network at any time. SMS is a cheap and easy way to send a message to anyone, other than the voice call or conference. This technology is beneficial to both the network operators and the ultimate users at the same time. Another use of this technology is the availability of international emergency numbers, which can be used by international users anytime without having to know the local emergency numbers. PDC or personal digital cellular technology was developed in Japan, and is exclusively used in JAPAN as well. PDC uses 25 KHz frequency. Docomo launched its first digital service of PDC in 1993.integrated digital enhanced network (iDEN) was developed by MOTOROLA, as a major mobile technology. It enabled the mobile users to make use of complex trunked radio and mobile phones. iDEN has a frequency of about 25Khz.i DEN allows three or six user per mobile channel.iS-136 is a second generation cellular phone system. It is also known as digital AMPS. D-AMPS were widely popular in America and Canada. However now it is in the declining phase. This technology is facing a strong competition by GSM technologies. Now the network carriers have adopted GSM and other CDMA 2000 technologies at large. Interim standard 95 is a first and the foremost CDMA cellular technology. It is most famous by its brand name known as cdmaOne. It makes use of the CDMA to transfer the voice signals and data signals from cellular phones to cell sites (cell sites is cellular network). Benefits of 2G technology (Second Generation) Digital signals require consume less battery power, so it helps mobile batteries to last long. Digital coding improves the voice clarity and reduces noise in the line. Digital signals are considered environment friendly. The use of digital data service assists mobile network operators to introduce short message service over the cellular phones. Digital encryption has provided secrecy and safety to the data and voice calls. The use of 2G technology requires strong digital signals to help mobile phones work. If there is no network coverage in any specific area, digital signals would be weak. How 2G Works How 2G Technology Works Advancement in mobile phones technology has been marked by generation (G). Analog phones are related to the 1st generation (1G), and then come digital phones marked by second generation (2G). This second generation mobile phones has changed the concept of mobile phones by introducing high data transfer rate, increased frequency band and wireless connectivity. There are three different types of technologies in the second generation these are FDMA (Frequency Division Multiple Access), TDMA (Time Division Multiple Access) and CDMA (Code Division Multiple Access). All types have one common feature of multiple access which means that many users are able to use the same number of cells. First part of all the technologies makes difference. Because of different types of technologies utilizes in 2G mobiles, there are different types of mobiles according to the technology incorporate in them. Let see the 2G technologies use in mobiles and their functions as they work.

How 2G (FDMA) Works Frequency Division Multiple Access (FDMA) enables the calls to use different frequency by splitting it into small cells. Each call uses different frequency. The phenomenon is same as in radio where different channels broadcast on separate frequency. So every radio station has been assigned different frequency according to the specific band available. FDMA is best in case of analog transmission but also support digital transmission. No doubt it is accommodating to the digital signals yet with poor service. How 2G (TDMA) Works Different technologies are categorized in second generations TDMA standard according to the different time zones indifferent countries in the world. These technologies are GSM (Global System for Mobile Communication) nearly used in the whole world. IDEN (Integrated Digital Enhanced Network) is introduced by Motorola used in US and Canada. IS-136 (Interim Standard-136) also known as D-AMPS (Digital Advanced Mobile Phone System) prevail in South and North America. PDC (Personal Digital Cellular) is used in Japan. TDMA is a narrow band of 30 KHz wide and 6.7 millisecond long. It is divided into three slots of time. Using the CODEC, stands for Compression / Decompression algorithm, compresses the digital information and use less space leaving for the other users. Division of this narrow band into three time slots increases the capacity of frequency band. TDMA supports both frequency bands IS-54 and IS-136. GSM (TDMA) is a different standard and provide basis for IDEN and PCS. Being an international standard, it covers many countries of the world. There is only the need for changing the SIM and you can get connected no need to buy a new phone. Having two different bands 900-1800 MHz band covers Europe and Asia

 850-1900 MHz band covers United State First band is in sync widely but second is limited to the United State. It is better to go for the first one if you need to go on extensive travelling.
How 2G (CDMA) Works Contrary to TDMA, CDMA works in a singular way. Like TDMA, It also converts the information into digital data and sends it. Now the information is extended upon the bandwidth. Incoming calls are spread over the surface of the channel and a code is allocated to them. As the data is spread over the surface of channel it is known as spread spectrum. It compresses the data into small packets and sends it to a separate frequency columns. Every caller sends out data to a similar spectrum. Every callers signals are spread over the channel having a unique code. R eaching at the receiving point, codes are to be matched and hence data delivers. CDMA refers to the GPS standard for marking the time stamp on the broadcast signals. CDMA supports Interim Standard (IS-95) and operational at the frequency bands of 800 MHz and 1900 MHz. What is 2G Mobile Technology 2G Mobile Technology 2G Mobile technology revolutionized the concept of mobile uses as compared to 1G. 1st generation used the mobile with analog system only used for the verbal communication. 2G Technology mobiles are now able to do not only verbal communication but also able to send text. There are 3 different types of 2G mobile technologies based on the system they are designed. Adoption of any one of the technology makes them somewhat different from the other because of the difference in their working method. All these 2G mobile technologies have different properties to facilitate a special feature of a mobile. FDMA (2G Mobile Technology) It works like a radio system by separating the frequency into equal spectrum but affecting the quality of voice. FDMA is an analog system still exists in 2G mobile technology with the digital module of 2G in limited area. Instead of frequency division now cellular based technology which divide geographical areas not frequency and improve the service. Properties This technology is first used in 1G mobile as an analog system, introduced in 2G with the increase in its frequency with the help of cellular technology. Able to carry digital transmission but digital transmission is not quality wise as good as in case of analog system. Facilitate with the feature of analogue system by enabling the accessibility of call. TDMA (2G Mobile Technology) 2G Mobiles uses TDMA (Time Division Multiple Access) technology in some of its models. It actually divides the band into three time-periods. TDMA contains technologies GSM (Global Service Mobile Communication), which is the most common technology, uses widely across the world. Properties It provides roaming in more than 200 countries. This international roaming feature attracts the subscribers to use it for travelling purpose. The most used and the most appreciative feature is that of short messaging service (sms). Use of sim is a prominent feature of GSM. It needs only a sim to start communication at a particular region. IDEN abbreviated for Integrated Digital Enhanced Network, which is TDMA based technology based on GSM, is utilized by Motorola limited to United State and Canada only. D-AMPS (Digital Advanced Mobile Phone System) also known as IS-136 used in America only North and South regions. PCS (Personal Communication System) is used in Japan. CDMA (2G Mobile Technology) Unlike TDMA, CDMA works using the entire band with the help of code. CDMA is based on a wide spectrum as many calls laid over each other identifying on the basis of unique code. CDMA gives a separate code to a separate phone. Increase the frequency band space by assigning code in sequence. Both senders and receivers are able to use a full band with the help of using their codes. Contrast to one analog call, nearly dozen calls can be channelized at the same time. IS-95 (Interim Standard) widely uses in Korea increases the capacity as able to use complete band.