Scribd
Upload
1K views

CARPROG MB Key Programmer Manual

This document provides instructions for using the CarProg system to program transponder keys for Mercedes Benz immobilizer systems from 1997-2001. It describes three types of immobilizer systems used on various Mercedes Benz models during this period that can be programmed by removing the immobilizer unit from the car, connecting an adapter, reading the immobilizer data, selecting a key number, and writing the key information to an empty transponder chip placed in the CarProg antenna.

Uploaded by

cameraman01
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

CARPROG MB Key Programmer Manual

This document provides instructions for using the CarProg system to program transponder keys for Mercedes Benz immobilizer systems from 1997-2001. It describes three types of immobilizer systems used on various Mercedes Benz models during this period that can be programmed by removing the immobilizer unit from the car, connecting an adapter, reading the immobilizer data, selecting a key number, and writing the key information to an empty transponder chip placed in the CarProg antenna.

Uploaded by

cameraman01
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

S4.

5 CarProg Mercedes Benz key programmer manual


System description: CarProg based Mercedes Benz Transponder key immobiliser system used on Mercedes Benz cars 1997-2001 immobilizers programming and transponder key generating and programming software.

Works on: MB A-class 1997-2001, C-class 1996-1999, E-class 1997-1999, CLK 1998-2001, Sclass 1997-1998.

All right reserved www.codecard.lt

You need just connect 5 wires to immobiliser connection points as on picture and program transponder key.

Type 1: Immobiliser with Motorola processor HC05X32 mask set 2D59J. Tested also with

All right reserved www.codecard.lt

5WK4688 (mask set 0D53J). Remove immobiliser from car, connect adapter A10 like in picture:

All right reserved www.codecard.lt

Read immobiliser data, select key number for programming, set empty PCF7935 in to CarProg antenna and write key.

Type 2: Immobiliser with Motorola processor HC05X32 mask set 1D69J.

All right reserved www.codecard.lt

Remove immobiliser from car, connect adapter A10 like in picture:

All right reserved www.codecard.lt

Read immobiliser data, select key number for programming, set empty PCF7935 in to CarProg antenna and write key.

Type 3: Immobiliser with Motorola processor HC05X32 mask set 0D69J ( 5WK4680 with mask set 0D69J, 5WK4696 with mask set 0D66J). Remove immobiliser from car, connect adapter A10 like in picture:

All right reserved www.codecard.lt

Read immobiliser data, select key number for programming, set empty PCF7935 in to CarProg antenna and write key.

All right reserved www.codecard.lt

You might also like