Go Back To Wilson Supply Gas - Welding Supplies Page: AWS Class Polarity Description

Electrode Selection chart
http://wilsonsupply.net/electrode_chart.html
GO BACK TO WILSON SUPPLY GAS - WELDING SUPPLIES PAGE

AWS Class Polarity Description
Fast Freeze, Out-of-Position, Mild Steel Stick Electrodes

E6011 Operators consistently give this electrode high marks. This quality Lincoln product is a AC, DC+, proven performer for AC pipe welding applications and sheet metal welding. Great DCelectrode to use on jobs where the steel isnt clean. Great for making tack welds. Use with confidence on plated, dirty, painted, or greasy AC, DC+, steel. It's an outstanding stick choice for AC pipe welding, for applications that require DCdeep penetration, and in jobs where x-ray quality welds are required. Got a small AC welder? Here's your electrode! Offers excellent arc stability for excellent AC, DC+, performance with power sources as low as 50V open-circuit voltage (OCV). A great DCstick electrode with the ability to start easily on low open circuit voltage welders. AC, DCDeveloped specifically for roof decking and other applications where burn through spot welding on sheet metal is required. Great for galvanized or plated steel, as well as on steel that is painted or dirty.
E6011
E6011
E6022
Fast-Fill, High Deposition, Mild Steel Stick Electrodes

E6027 When the job demands x-ray quality welds, high deposition rates, and excellent AC, DC+, wash-in. Designed for peak performance on multiple pass welds, and fast-fill single DCpass welds. High deposition rates and smooth ripple-free beads make it a great choice for welding AC, DC+, on mild steel. It is especially effective for multi-pass welds and fast-fill single pass DCwelds. When the project involves large welds, you cant pick a more user-friendly electrode! AC, DC+, Operators appreciate smooth bead and high deposition rates. A great general purpose DCelectrode for single or multi-pass applications.
E7024
E7024-1
Fill Freeze, High Speed, Mild Steel Stick Electrodes

E6012 AC, DCGot a variety of jobs that a single all-position electrode has to handle This versatile, high-speed electrode is a real workhorse on sheet metal lap and fillet welds. Its also a great choice for welding poor fit-up welding jobs.
E6013
Heres a terrific all-position electrode for low amp welding on sheet metal -- especially AC, DC+, in applications where appearance is important. Designed for excellent performance DCwith smaller AC welders with low open-circuit voltages. Its an excellent choice for jobs involving irregular or short welds that require a change in position. Features high deposition rates for fast performance. Operators love this easy-to-use, AC, DC+, all-position electrode! Choose for sheet metal lap joints and fillet welds, general DCpurpose plate welding and maintenance jobs.
E7014
Low Hydrogen, Mild Steel Stick Electrodes

E7018 H4R AC, DC+ Theres a long list of reasons why operators are so loyal to Excalibur 7018 MR. They tell us they love the clean puddle, the square coating burn off, the easy all-position handling and the excellent wash-in characteristics. Its a terrific choice for jobs that involve steels with poor weldability. When the job involves critical, out-of-position welding, reach for 7018-1 MR. It offers a beautifully clean weld puddle, uniform slag follow, and superior wash-in with no undercutting. Also great for welding on steels with marginal weldability. 7018-A1 MR low hydrogen electrode is an outstanding choice for all position welding of 0.5% molybdenum low alloy steels of 50Ksi (345 MPa) minimum yield strength. AC? DC? This electrode performs beautifully either way! 7018AC is a great choice for low open circuit voltage AC power sources. Cold restrikes are no problem with this versatile, all-position electrode. A top-choice electrode for welding on thick sections and restrained joints when cracking is an issue. Its also a good call when the project involves hard-to-weld steels. Also offers high deposition rates. Great for jobs on mild steel and some high-strength low-alloy steels. It also tolerates high sulfur and high silicon steels. Higher tensile strength for the stressrelieved properties.
E7018-1 H4R AC, DC+ E7018A1-H4R E7018 H8 AC, DC+ AC, DC+
E7018 H4R
AC, DC+
E7018 H4R
AC, DC+
Low Hydrogen, Low Alloy Steel Stick Electrodes
1 of 2
1/13/2014 6:48 PM
Electrode Selection chart
http://wilsonsupply.net/electrode_chart.html
E8018-B2 H4R
AC, DC+
E8018-B2 H4R, AC, DC+ E9018-G H4R E8018-C1 H4R E8018-C3 H4R E9018-B3 H4R E9018-M H4R E11018M-H4R AC, DC+ AC, DC+
AC, DC+
DC+ DC+
If your welding involves 1-1/4% chromium and 1/2% moly power pipe, tubes, boilers or castings. 8018-B2 offers a nominal 1-1/4% chromium and 1/2% molybdenum deposit. Reach for this electrode when design temperatures exceed 850F (450C). Designed to meet the rigorous demands of high temperature, high pressure piping assignments. This electrode offers a nominal 1-1/4% chromium and 1/2% molybdenum deposit and meets the requirements of high tensile (90,000 psi) steels. 8018-C1 is the ideal moisture resistant electrode for welding on equipment and pipe that transport liquid ammonia, propane and other gases. An excellent all-position electrode for applications requiring a nominal 2-1/4% nickel deposit. 8018-C3 is a 1% nickel all position electrode for fabrication or repair of 1% nickel steels, as well as a wide variety of other low alloy and carbon steels. Great low hydrogen stick electrode. For welding 2-1/4% chromium and 1% molybdenum steels when heat treating is required. Good mechanical properties in the as-welded and stress-relieved conditions. A great choice when temperatures exceed 850F (450C). 9018M is intended for welding high strength steels of 90,000 psi (620 MPa) tensile strength and higher. 11018M is designed primarily for joining high strength steel types in the as-welded or stress relieved conditions with excellent low temperature impact properties and robust welding procedures. All-position welding, except vertical down.
Fast Freeze, Out-of-Position Pipe Welding, Mild Steel and Low Alloy Steel Stick Electrodes
Great choice for welding on dirty, rusty, greasy or painted steel -- especially in vertical or overhead applications. Ideal for steel thats less than 100% clean. Its a first choice for pipe welding and vertical-up and overhead plate welding. This electrode is a long-time favorite among operators who handle cross-country and in-plant pipe welding. Need a reliable, all-position stick electrode? Heres your electrode! Produces a 70,000 psi, 1/2% molybdenum weld deposit for use on 1/2% molybdenum pipe steels and API 5LX-42 through X-56 line pipe. Tendency for finger nailing and electrode sticking have been virtually eliminated! Designed for all passes of API 5LX-52 through X-65 high strength pipe. Provides the welder with a clean, visible weld puddle and superior puddle control. Heres an electrode that makes short work of even the most challenging high silicon pipe applications! an outstanding choice for API 5LX-56 through X-70 grade pipe, as well as for a wide range of sheet metal welding assignments. When your job involves vertical down welding on high strength pipe This dependable stick electrode offers the perfect combination of low temperature impact properties and deep penetration. It handles all passes on API 5LX-56 through X-70 pipe. Excellent stacking ability is a feature that maximizes productivity on the job site. Also meets AWS E8010-P1 requirements. An all-position pipe electrode thats a great choice when the task is vertical down welding on API 5LX-70 through X-80 pipe also performs well in situations where low hydrogen processes are not practical, and when welding on dirty steels.
E6010
DC+
E7010-A1
DC+
E7010-G
DC+
E8010-G
DC+
E8010-G
DC+
E9010-G
DC+
2 of 2
1/13/2014 6:48 PM

Go Back To Wilson Supply Gas - Welding Supplies Page: AWS Class Polarity Description

Uploaded by

Copyright:

Available Formats

Go Back To Wilson Supply Gas - Welding Supplies Page: AWS Class Polarity Description

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Go Back To Wilson Supply Gas - Welding Supplies Page: AWS Class Polarity Description

Uploaded by

Copyright:

Available Formats

Electrode Selection chart

GO BACK TO WILSON SUPPLY GAS - WELDING SUPPLIES PAGE

Fast Freeze, Out-of-Position, Mild Steel Stick Electrodes

Fast-Fill, High Deposition, Mild Steel Stick Electrodes

Fill Freeze, High Speed, Mild Steel Stick Electrodes

Low Hydrogen, Mild Steel Stick Electrodes

Low Hydrogen, Low Alloy Steel Stick Electrodes

Electrode Selection chart

You might also like