Scribd
Upload
100 views

Inputs From Client: 1. bfp132401 1 0 (G.A. Drawing For SWS Gas KO Drum)

1. The document contains inputs from a client for designing a gas knockout (KO) drum including dimensions, materials, and operating parameters. 2. Various design specifications and requirements are provided relating to insulation, vessel heads, documentation standards, and design basis. 3. Assumptions are listed for design considerations such as ambient temperatures, emissivity of materials, and heat transfer coefficients.

Uploaded by

SIVA
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
100 views

Inputs From Client: 1. bfp132401 1 0 (G.A. Drawing For SWS Gas KO Drum)

1. The document contains inputs from a client for designing a gas knockout (KO) drum including dimensions, materials, and operating parameters. 2. Various design specifications and requirements are provided relating to insulation, vessel heads, documentation standards, and design basis. 3. Assumptions are listed for design considerations such as ambient temperatures, emissivity of materials, and heat transfer coefficients.

Uploaded by

SIVA
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

INPUTS FROM CLIENT: 1. bfp132401-1-0 (G.A.

drawing for SWS gas KO drum): Sl No Description Quantity / Material 1 2 3 4 5 6 7 8 ID of KOD Total Height of KOD Thickness of KOD Type of head Insulation thickness Steam coil size Operating pressure Operating temperature 914 3048 10 2:1 Ellipsoidal head 50 3/4 10.9 180

Unit mm mm mm mm Inch PSI F

Remarks

2. bre221222-1-a (Mechanical data sheet for SWS gas KO drum): Sl No Description Quantity / Material Unit 1 2 3 MOC of KOD Total Height of KOD Height to be steam traced for KOD Carbon steel 3048 914 mm mm

Remarks

3. EDG_A3_REV9_Oct07 (Draughting and documentation requirements): Sl No Description Quantity / Material Unit Remarks 1 Customary Units for Design Data Page 7 of 57 2 Nominal Pipe Sizes Page 8 of 57 3 Electronic File Format Microsoft Word ( Office Page 9 of 57 Requirements 2000 or 2003) or Acrobat version. 5. 4 External Suppliers Documentation Page 21 of 57 5 Sample Document Cover Sheet Page 31 of 57 4. rp057678-1-a (General design specification): Sl No Description Quantity / Material #3SRU Modification 1 Project name Project Ambient Temperature : 2 Earth at 2 ft. depth 35 Ambient Temperature : 3 Air (Outdoor) 35 4 Wind speed 42 5 Average Wind speed 23.6

Unit -

Remarks Page 05 of 37 Page 09 of 37

C Page 09 of 37 C m/s m/s Page 10 of 37 Page 10 of 37

5. rp057688-1-a (Instructions to vendors concerning documents/drawings/manuals): Sl No Description Quantity / Material 1 Document numbering 6. rp058017-1-b (Process design basis): 1 SWS Gas K.O. Drum (66C6612) 2 Feed Gas Details (Case 1) NH3 H2S H2O TOTAL Pressure Temperature 3 Feed Gas Details (Case 2) CO2 NH3 H2S H2O TOTAL Pressure Temperature

Unit -

Remarks Page 9 of 75

New equipment 16.44 15.1 10.16 41.73 10.92 180 0.03 16.02 14.99 8.68 39.72 10.92 180

lbmole/hr lbmole/hr lbmole/hr lbmole/hr psig F lbmole/hr lbmole/hr lbmole/hr lbmole/hr lbmole/hr psig F

Page 5 of 22

Page 9 of 22

Page 11 of 22

7. rp058053-1-0 (Design basis for static equipment): Sl No Description Quantity / Material 1 K.O. drum Vessel heads 2:1 ellipsoidal type

Unit -

Remarks Page 9 of 11

8. ts057977-1-a (Specification for hot insulation): Sl No Description Quantity / Material Maximum insulation outside surface 1 temperature is 66 2 Design ambient air temperature Insulation material (when normal operating temperatures are lower than 120 C (248F) 20

Unit C C

Remarks Page 5 of 20 (GPS-N1) Page 5 of 20 (GPS-N1) Page 8 of 20 (GPS-N1)

Mineral wool

9. ts058054-1-a (Specification for pressure vessels): Sl No Description Quantity / Material Unit Remarks

Location of KOD

Indoor

Page 10 of 23

ASSUMPTIONS:

Sl. Assumptions / No Considerations 1 Acid gas temperature in KOD 2 3 4 5 6 7

value 180

Unit F

Reference

8 9 10 11 12 13 14

rp057678-1-a (General design Ambient Temperature 35 C specification): Design ambient air ts057977-1-a (Specification for hot temperature 20 C insulation): Maximum insulation outside ts057977-1-a (Specification for hot surface temperature is 66 C insulation): Emission Coefficient for Reference Kern, Page no.71, cast Radiation of carbon steel () 0.95 iron at 100-480 C Thermal Capacity of carbon http://www.engineeringtoolbox.com/t steel 55 W/m K hermal-conductivity-_429.html Thermal Capacity of Insulation http://www.engineeringtoolbox.com/t material (Glass wool) 0.04 W/m K hermal-conductivity-_429.html http://www.eslin.us/downloads/eslin/ 2:1 Ellipsoidal surface area TR-1010Calculating Vessel Surface formula 1.084*D2 m2 Area for ESLIN R-Board.pdf 2 Outside heat transfer BTU/h ft coefficient for steam (ho) 1500 F Reference from Kern, Page no.719 Outside diameter of steam coil 19.1 mm Inside diameter of steam coil 17.3 mm Number Of Coil Inlets 2 Dirt Factor (RD) For Steam h.ft2. Coil 0.02 F/BTU ts058054-1-a (Specification for Location of KOD pressure vessels):

You might also like