Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    WALLFI

    Uploaded by

    Renzo Leyton Calderon
    This document provides instructions for using the Wall-Fi remote user interface with Microsol II Plus controllers. Wall-Fi allows remote access and control of Microsol II Plus systems through configuration of settings, schedules, and manual control modes from a distance of up to 50 meters. Key functions include setting temperature setpoints, event scheduling, and accessing real-time system data displays for monitoring. Wall-Fi connects to Microsol II Plus controllers via radio frequency and can support wireless networks of up to 16 repeaters to extend the communication range.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    WALLFI

    Uploaded by

    Renzo Leyton Calderon
    40 views2 pages
    This document provides instructions for using the Wall-Fi remote user interface with Microsol II Plus controllers. Wall-Fi allows remote access and control of Microsol II Plus systems through configuration of settings, schedules, and manual control modes from a distance of up to 50 meters. Key functions include setting temperature setpoints, event scheduling, and accessing real-time system data displays for monitoring. Wall-Fi connects to Microsol II Plus controllers via radio frequency and can support wireless networks of up to 16 repeaters to extend the communication range.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for using the Wall-Fi remote user interface with Microsol II Plus controllers. Wall-Fi allows remote access and control of Microsol II Plus systems through configuration of settings, schedules, and manual control modes from a distance of up to 50 meters. Key functions include setting temperature setpoints, event scheduling, and accessing real-time system data displays for monitoring. Wall-Fi connects to Microsol II Plus controllers via radio frequency and can support wireless networks of up to 16 repeaters to extend the communication range.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    40 views2 pages

    WALLFI

    Uploaded by

    Renzo Leyton Calderon
    This document provides instructions for using the Wall-Fi remote user interface with Microsol II Plus controllers. Wall-Fi allows remote access and control of Microsol II Plus systems through configuration of settings, schedules, and manual control modes from a distance of up to 50 meters. Key functions include setting temperature setpoints, event scheduling, and accessing real-time system data displays for monitoring. Wall-Fi connects to Microsol II Plus controllers via radio frequency and can support wireless networks of up to 16 repeaters to extend the communication range.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    REMOTE USER INTERFACE FOR MICROSOL II PLUS

    Ver.02

    1. DESCRIPTION
    Wall-Fi is an interface intended to be used together with Microsol II plus from version 2. It enables easy and quick remote access to all Microsol II plus information and setup.

    back to the previous menu or to leave any function without confirming press are available in the function menu:

    . The following options

    01-Setpoint A1
    2. APPLICATION
    Solar heating controlling.

    03-S2 Hi Temp 04-Pmp Activat

    05-A1 Man Mode 06-A2 Man Mode

    02-Setpoint A2

    3. TECHNICAL SPECIFICATIONS
    - Power supply: 90 - 264 Vac (50/60 Hz) - Size: 90 x 131 x 28 mm (W x H x D) - Operating temperature: 0 to 50C - Operating humidity: 10 to 90% RH (no condensation) - Data communication: By radio frequency - maximum distance of 50 meters without obstacles -Routers: For installations requiring the use of the FG-Wi Router, a maximum of 16 routers can be installed.

    Only with Microsol II plus from version 03

    6.1 Auxiliary 1 setpoint


    This function allows adjusting the control temperature for auxiliary output 1.

    6.2 Auxiliary 2 setpoint


    This function allows adjusting the control temperature for auxiliary output 2.

    4. MAIN SCREEN
    The figure below shows the main screen of Wall-Fi with the system in operation. Preferential indication description

    6.3 Sensor 2 overheating temperature


    This function allows adjusting the overheating temperature for sensor 2. When applied to swimming pools this is the limit temperature of the water (comfort temperature)

    Swimming pool 26.9$C


    Preferential indication value 5. FUNCTION MENU The function menu allows configuring Microsol II plus controller functions remotely. To access the function menu press and keys simultaneously for two seconds until the functions are shown in the display. To access any function and confirm the value press ; to go back to the previous menu or to leave any function without confirming press . The following options are available in the function menu:

    6.4 Water pump operating mode


    This function allows adjusting the manual operating mode of the water pump.

    6.5 Auxiliary 1 manual mode enable


    The operating mode of the auxiliary 1 output can be toggled between manual and automatic by pressing on this function.

    6.6 Auxiliary 2 manual mode enable


    The operating mode of the auxiliary 2 output can be toggled between manual and automatic by pressing on this function. Note: This option will be only available when the remote Microsol II plus is version 03.

    7. ACCESS MENU FOR ADJUSTING THE CONNECTION


    Upon accessing the quick access menu while Wall-Fi is not connected to remote Microsol II plus, the user will have two functions available for adjusting the address of remote Microsol II plus:

    01-Access Code 02-Functions


    5.1 Access code

    03-Schedule Mode 04-Schedule Evt

    05-Clock

    01-McSol 485 Add 02-Search McSol


    7.1 Remote Microsol II plus address
    The address of remote Microsol II plus controller can be manually adjusted by entering this function. The value of this function must be the same value configured in remote Microsol II plus.

    The access code 123 must be entered in this screen to enable changing functions of remote Microsol II plus controller. To enter the code press on the message and adjust the value that will be blinking on the display. Press again to confirm; to cancel and go back press .

    5.2 Functions
    In this screen all functions of remote Microsol II plus can be adjusted. To make changes press on the desired function and enter the value that will be blinking on the display. Press again to confirm the new value; to cancel and go back press . Function description

    7.2 Search remote Microsol II plus


    Pressing on this function makes Wall-Fi start searching for remote Microsol II plus address automatically. Enter the quick access menu again to stop the automatic search.

    On Dif Temp dOn@ 10.0 #


    Function value Function unit

    8. SETUP MENU
    The operating characteristics of Wall-Fi can be adjusted through the setup menu. To access the function menu press and keys simultaneously for eight seconds until the functions are shown in the display. The following options are available in the setup menu:

    Function code

    01-McSol 485 Add


    5.3 Event scheduling mode
    The operating mode of remote Microsol II plus event scheduling can be programmed from this screen.

    04-Timeouts 05-RF Config 06-Router Add

    07-Routes 08-Statistics

    02-Interface 03-Descriptions
    8.1 McSol2 485 Add

    5.4 Event scheduling


    The schedule of the remote instrument can be viewed and changed by accessing this function with the key . To inform or change the configuration press on the option corresponding to the event and day of the week. Adjust the time of beginning and end of the event using the and keys, press to confirm the new value; to cancel and go back press . To go back or to leave the options press at any time. Day of week

    This function allows to manually adjusting the address of the remote Microsol II plus controller. The value set for this function should be the same value set on the remote Microsol II plus.

    Monday E02@ 09:40/18:50


    Day event Start time Finish time

    8.2 Interface
    Allows adjusting the user interface characteristics:
    Fun Descrio Indication Language Display contrast Display timeout Sound signaling Mn. S1 0 0 Off Mx. All 10 999 On Unid min. Padro S2 Port 5 0 Off

    5.5 Clock adjustment


    To adjust the internal clock of remote Microsol II plus select this function by pressing the values using the and and press to confirm or to cancel. To go back or to leave the options press at any time. . Then adjust

    I01 I02 I03 I04 I05

    8.3 Descriptions 6. QUICK ACCESS MENU


    The quick access menu allows configuring the setpoints of supports 1 and 2, as well as the manual operating modes and the overheating temperature for sensor 1. To access this menu, press shortly while Wall-Fi main screen is displayed. To access any function and confirm the value press ; to go Allows to adjust the remote Microsol II plus sensors display message. The message selected will be used on the Wall-Fi main screen to indicate which temperature is being displayed.

    WALLFI02-02T-11782

    1-Description S1 Sensor 1 description 2-Description S2 Sensor 2 description

    11. WIRING DIAGRAM

    Sensor 2 26.9$C

    3-Description S3 Sensor 3 description


    8.4 Timeouts
    Allows adjusting the timings for the RF communications:
    Fun Description Time to scan for the remote Microsol II plus. Number of communication failures before error indication Delay for receiving data Delay for receiving events schedule Delay for sending functions Time for displaying the SPC message Min. 1 1 60 60 60 25 Max. 999 10 999 999 999 999 Unit sec. msec. msec. msec. x100ms Default 1 3 200 200 200 25

    Distribution box
    A B A B A B

    RS-485
    PUMP AUX 1

    MICROSOL II plus

    T01 T02 T03 T04 T05 T06

    Wall-Fi

    FG-Wi Converter (SLAVE)

    Microsol II remote

    Using Wi-FG routers

    8.5 RF Config
    This function allows adjusting the wireless network address and channel. First, place the Slave FG-Wi Converter (which is connected to the remote Microsol II plus) into setup mode. To perform this operation, just set to its lower position the switch located on the converter rear panel, and wait until the led starts flashing. Press the key in the Wall-Fi function, enter the network address, and channel values. Confirm both values by pressing . After the channel confirmation, the Wall-Fi will start sending the configuration. Confirm that both TX and RX leds remain lit on the Slave FG-Wi. This indicates that the device correctly received the configuration. Then, set its switch to the normal operation position. After this procedure, press in the Wall-Fi, so it returns to the setup menu.
    Sensor 2 26.9$C

    RS-485

    FG-Wi Router Wall-Fi

    FG-Wi Converter (SLAVE) Distribution box


    A B A B A B
    PUMP AUX 1

    8.6 Router Add


    This function allows individually configuring the routers addresses and channels, if FG-Wi Router units are used in the wireless network. To perform this operation, first set the switch of the respective FG-Wi Router to the configuration mode and wait until the led starts flashing. Then, enter in the Wall-Fi function and select the address to be used by the router and confirm it by pressing . The Wall-Fi will send the configuration command for the FG-Wi Router, and its correct receiving may be confirmed when the led remains lit on the router. After verifying that the FG-Wi Router correctly received the address, set its switch back to the normal operation position.
    MICROSOL II plus

    8.7 Routes
    This function allows individually configuring the route (path) through the routers (FG-Wi Router units) that the wireless communication will follow, to reach the Slave FG-Wi connected to the remote Microsol II plus. When accessing this function, it should be entered the addresses of the routers that make up the route from the Wall-Fi to the Slave FG-Wi. A maximum of 16 FG-Wi Router units can be used per route. If no router is used on the network, all the routes should be configured with the "Off" setting.

    IMPORTANT According to NBR5410 and IEC60364 standards: Install protectors against overloads on power supply. For more information contact our application eng. department through e-mail [email protected] or dial +55 51 3475 3308.

    8.8 Statistics
    This function allows viewing on-screen statistics on wireless communication, by displaying the number of errors in requesting data from the remote Microsol II plus (Scan Err) and the number of errors in sending functions (Rx Err).

    9. Other views
    Pressing the key repeatedly you can view other information from the remote Microsol II plus. The selected visualization will remain on the display for 10 seconds and after this time it will return to the main screen. The options available are:

    9.1 Day of week and time


    Day of week

    Time

    Tuesday 14:19 Pump Aux1 Aux2 % $ %& Aux 1status $ Output off; % Output on; $& Manual operated output off; %& Manual operated output on;
    Aux 2 status

    9.2 Outputs status


    Water pump status

    9.3 Viewing all temperatures


    Temperature at sensor 1 Temperature at sensor 2

    S1: 104 S2:56.6 S3:39.6 Df:47.4


    Temperature at sensor 3

    Diferential temperature (S1-S2)

    10. INDICATORS

    S1 Min Temp S1 Max Temp

    Alarm of minimum temperature on the sensor S1 Alarm of maximum temperature on the sensor S1 Wall-Fi is unable to locate remote Microsol II plus at address 1; High temperature alarm; Freezing temperature alarm; Sensor disconnected.

    Only with Microsol II plus from version 03

    ENGLISH

    Mere illustrative image

    You might also like