Thanks for purchasing this ATV/Motorcycle/Scooter computer; this manual is designed for ACE-2XX series.

Each model has 4-6 LED indicators. Dierent model has dierent LED indicators. You may found above photo has dierent LED indicators from your computer; the photo above is for reference only.

ACE-2XX User Manual

3 2

ATV/Motorcycle Computer
English
10R-039949

6 7

PANEL DESCRIPTIONS
1. 1 st row: Speedometer 2. 2 nd row: Trip 1&2, RT, AVG 3. 3 rd row: ODO, TT, MAX 4. RESET Button
Left-Direction Indicator/Green Main-Beam Headlamp/Blue Right-Direction Indicator/Green Hazard W arning/ Red

Speed Sensor:

5. MODE Button 6. Fuel Gauge 7. LED Indicators

Engine Oil / Red Neutral Gear /Green Re v erse Gear /Red Direction Indicator/Green

The ACE-2XX can use either a 2 wire hall sensor or a reed sensor when it is connected to the bikes power.
Reed Speed Sensor and Magnet:

N R

FEATURES
Displays speedometer, Trip and odometer and bar-graphic fuel gauge at the same time. Built-in 4-6 LED indicators for dierent applications and backlight. Odometer and total riding timer are always kept in memory. Metric/Empire unit options are available. Adjustable wide wheel circumference setting from 1 to 3999mm. Fuel gauge includes +/- 100, 250 and 510 Ohm options for fuel sender input resistance, as well as fuel gauge o mode. Includes bracket, speed sensor, tting kits and wiring harness.

1. This sensor is universal sensor for motorcycle, nd a rotating part to install magnet (for example disk, sprocket or driveshaft) and a location to install the sensor where it can be aligned to the magnet. 2. Align the center of the magnet to either of the sensor marking lines or the side of the sensor. 3. Installing the sensor parallel to the vibration direction creates optional anti-vibration eect. 4. Make sure the gap between the magnet and the sensor is within 8mm.
Max. 8mm Max. 8mm

sensor

sensor
Max. 8mm

SPECIFICATIONS
Function
Speedometer Trip meter 1&2 Odometer 12/24 Hour Clock Average speed Riding timer Maximum speed Total Riding Time Bar-Fuel Gauge

Vibration Direction

Vibration Direction

Simbolo
Km/H / MPH TRIP 1/2 ODO AVG RT MAX TT

Specifications
2.4-399 km/h (248 MPH) 0.0-999.9 KM/Miles 0- 999999 KM, 0-624999 Miles 0:00`-11H59`/23H59` 2.4-399 KM/h (248 MPH) 0-99H59`59`` 2.4-399 KM/h (248 MPH) 0-999999H

+/- 100, 250, 500 options and Off

Hall Effective Speed Sensor and Magnet:

DC 9-18V Reed Sensor or Hall sensor with 2 wires 1mm-3999mm 96.7mm x 53.9mm x 24.5 mm

Power Input Speed Sensor Wheel circumference setting Dimensions

INSTALLATION
Main Unit Mounting
Main Unit Mounting

1. This is universal sensor for ATV front or rear wheel installation or motorcycle front wheel installation. For some tments an accessory speed sensor holder may need to be purchased. 2. Find a rotating part to install magnet (for example disk, sprocket or driveshaft) and a location to install the sensor where it can be aligned to the magnet 3. Align the center of the magnet to center of side face of the sensor. 4. Make sure the gap between the magnet and the sensor is within 5mm.

Rubber Pad Washer

Specific Hall sensors:

Spring Washer Fixing Screw Nut

Cable drive adaptors for most bikes originally tted with cable driven speedometers or milemeters are available. When using these cables it is necessary to divide the circumference setting by the number of rotations of the cable per rotation of the wheel.

FUNCTIONS
Km/H or MPH: Speedometer

WHEEL CIRCUMFERENCE TABLE

1. The details below have been calculated using following formula: Tire Diameter (inches) x 25.4(mm/inches) x 3.1416 = wheel circumference (in mm). 2. Identify the tire size of your ATV/Motorcycle when you need to change dierent tire size and key in the corresponding number shown in the following chart. Circumferen Circumferen Circumferen Tire Size ce number Tire Size ce number Tire Size ce number (mm) (mm) (mm) 1197 1516 1835 15 inch 19 inch 23 inch 16 inch 17 inch 18 inch 1277 1357 1436 20 inch 21 inch 22 inch 1596 1676 1756 24 inch 25 inch 26 inch 1915 1995 2075

Displays speed meter up to 399 Km/H or 248 MPH.

MAX: Maximum Speed Meter

Displays highest speed achieved since last Reset operation.

AVG: Average Speed Meter

It calculates average speed since last RESET. The AVG is calculated from TRIP 1 be divided by RT.
TRIP 1&2: Trip Meter 1 and 2

TRIP function accumulates trip distance since last RESET as long as bike/vehicle is in motion.
ODO: Odometer

ODO accumulates total accumulated distance traveled during bike moving. RT: Riding Timer 1. Calculates total running time since last RESET. 2. Count automatically begins with movement.
TT: Total Riding Time

1. Calculates total riding time traveled during bike moving. 2. TT data is stored in memory, and cannot be reset.
: 12/24 hour Clock

It displays 12 or 24 hour current time.

: Fuel Gauge

1. Have 7 bars to indicate how much fuel remains. 2. Built-in +/- 100, 250 and 510Ohm fuel sender resistance, the fuel bar display will disappear in when you select o mode. 3. Last bar ashes to indicate low fuel level automatically.

3. The computer calculates the wheel rotating length between 2 passes of the magnet; use this table to nd the settings when you are using a reed sensor or an universal hall sensor with magnet to measure your speed. 4. If you are using a cable drive speed sensor then divide the number in the above table by the number of turns of the cable drive for each revolution of the wheel. For example if 1 wheel revolution equals 5 turns of speed cable then the wheel circumference has to be divided 5. 5. You can use more magnets, but the wheel circumference setting must be divided by the number of magnet you installed. Clock,Wheel Circumference,Units and Fuel Gauge Resistance SET UP 1. Setup operations include 12/24hour clock,, wheel circumference, units and fuel meter input resistance selection. These must be set up step by step. The computer will be automatic reversion to normal mode if no button operation for 75 seconds at any setting screen. 2. Press both MODE & RESET buttons to go into setting screen. In each setting screen, press RESET button to increment the ashing digit by 1 or convert units, press MODE button to conrm the digit setting and jump to next digit or next setting screen to be set. Press MODE button for 2 seconds at any setting screen to nish the setting and go to normal mode.

BUTTON OPERATIONS
MODE BUTTON

Press the MODE button to move between all functions in loop sequence as path from one function screen to another.
Mode

Mode

Mode Mode

3. It displays "12 or 24H and XX:XX-XX" symbols as well AM/PM in 12H mode. Operates buttons as per descriptions of item 2 to nish clock setting and jump to wheel circumference setting. 4. In "cXXXX" display, "c" means "Circumference", following 4 default digits; ashing digit is digit to be set. Follow the item 2 of button operation to nish the wheel circumference setting and jump to unit setting. 5. It displays KM/H or MPH, each press of RESET button switches units; press MODE button to conrm unit setting and jump to fuel sensor resistance setting. 6. It displays 100r and fuel tank symbol, follow the item 2 to select 100, 250, 510ohm, oFF, -100, -250 and -510Ohm and jump to jump to clock setting or return to Normal Mode. The fuel meter bar will disappear if you select oFF mode.

Mode

RESET BUTTON

1. Press MODE button to get to the desired screen then press RESET button for 2 seconds to reset Trip 2, MAX SPD and AVG speedometer from stored values to zero individually. 2. The data of Trip 1, AVG & RT can be reset at the same time when one of the 3 data functions is being reset. 3. ODO, clock and TT data cannot be reset.
RESET 2 sec

Clock,Wheel Circumference,Units and Fuel Gauge Resistance SET UP

RESET+ MODE 2 Sec

Mode 2 sec Mode

Clock: Hour
RESET

RESET

RESET

Mode

RESET

Clock: Minute
Mode

RESET

Clock: Second
Mode

RESET

Wheel Size: 1 ~ 3999 mm

Mode

RESET

Mode

RESET

Unit: KM/H / MPH

RESET Mode

Fuel Type: 100/250/510/-100/-250/-510/o