Gaging for HSK- Toolholders

ISO 12164-1

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

Data Sheet for HSK Toolholder Gages

ISO 12164-1

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

Taper Air Jet Ring

Hard Chrome plated with 2 measuring levels according to ISO 12164-1 in accordance with Sketch Nr. 1392 with hose 1.5 meters long and quick connect coupler for connection to MSG. Type HSK-A32 = HSK-B40 HSK-A40 = HSK-B50 HSK-A50 = HSK-B63 HSK-A63 = HSK-B80 HSK-A80 = HSK-B100 HSK-A100 = HSK-B125 HSK-A125 = HSK-B160 HSK-A160 Part Number STO-415-2240-004122 STO-415-2240-004123 STO-415-2240-004124 STO-415-2240-004125 STO-415-2240-004126 STO-415-2240-004127 STO-415-2240-004768 STO-415-2240-004769

Taper Master Plug

With calibration step, according to ISO 12164-1 in accordance with Sketch Nr. 1401, hardened and aged steel with international certification. Type HSK-A32 = HSK-B40 HSK-A40 = HSK-B50 HSK-A50 = HSK-B63 HSK-A63 = HSK-B80 HSK-A80 = HSK-B100 HSK-A100 = HSK-B125 HSK-A125 = HSK-B160 HSK-A160 Part Number STO-300-0008-004128 STO-300-0008-004129 STO-300-0008-004130 STO-300-0008-004131 STO-300-0008-004132 STO-300-0008-004133 STO-300-0008-004770 STO-300-0008-004771

Clamping Shoulder L5 - Mechanical

For the measurement of the L5 according to ISO 12164-1 in accordance with Sketch Nr. 1421, includes master and dial indicator. Type HSK-A32 = HSK-B40 HSK-A40 = HSK-B50 HSK-A50 = HSK-B63 HSK-A63 = HSK-B80 HSK-A80 = HSK-B100 HSK-A100 = HSK-B125 HSK-A125 = HSK-B160 HSK-A160 Part Number STO-421-1102-104170 STO-421-1102-104171 STO-421-1102-104172 STO-421-1102-104173 STO-421-1102-104174 STO-421-1102-104175 STO-421-1102-104797 STO-421-1102-105199

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

Pre-measurement device for the Toolholder Flange

HSK tool shank according to ISO 12164-1 and Sketch 1477 incl. Gage with indicator and certificate. Type HSK-A32 = HSK-B40 HSK-A40 = HSK-B50 HSK-A50 = HSK-B63 HSK-A63 = HSK-B80 HSK-A80 = HSK-B100 HSK-A100 = HSK-B125 HSK-A125 = HSK-B160 HSK-A160 Part Number STO-411-1302-104285 STO-411-1302-104286 STO-411-1302-104287 STO-411-1302-104288 STO-411-1302-104421 STO-411-1302-104558 STO-411-1302-104773 STO-411-1302-104774

Key Gages
Measures the size and radius of HSK tool holder drive keys.
setting gage measuring gage 1 gage ring with dial

for dial indicator

for drive keys

indicator and measuring gage 2 for drive keys b1 r3

Tool Taper per ISO 12164-1 HSK 32 HSK 40 HSK 50 HSK 63 HSK 80 HSK 100 HSK 125 HSK 160

Part Number STO-283.001 STO-283.002 STO-283.003 STO-283.004 STO-283.005 STO-283.006 STO-283.007 STO-283.008

+/-0.040
7.05 8.05 10.54 12.54 16.04 20.02 25.02 30.02

e1 8.905 11.081 13.997 18.110 22.073 27.561 35.580 44.538

e2 4.903 5.903 7.648 9.150 11.898 14.888 18.388 22.888

+/-0.020
1.38 1.88 2.38 2.88 3.88 4.88 5.88 7.88

Description Complete set with case includes measuring ring with dial indicator, measuring gage for lower deviation, measuring gage for upper deviation, mean deviation and setting gage for dial indicator. Function The setting gage is placed into the gage ring, and the dial indicator is set to zero. The measuring gage 1 is then used to measure the lower deviation of the drive key, and the measuring gage 2 the upper deviation.
Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

Air Gaging HSK-Spindle

ISO 12164-2
Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

Data Sheet for HSK Spindle Gages

ISO 12164-2

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

Taper Air Jet Mandrel

Hard Chrome plated with 2 measuring levels according to ISO 12164-2 in accordance with Sketch Nr. 1395 with hose 1.5 meters long and quick connect coupler for connect to MSG.

Type HSK-A32 = HSK-B40 HSK-A40 = HSK-B50 HSK-A50 = HSK-B63 HSK-A63 = HSK-B80 HSK-A80 = HSK-B100 HSK-A100 = HSK-B125 HSK-A125 = HSK-B160 HSK-A160

Part Number STO-310-2240-004095 STO-310-2240-004094 STO-310-2240-004060 STO-310-2240-004061 STO-310-2240-004062 STO-310-2240-004063 STO-310-2240-004756 STO-310-2240-004757

Taper Master Ring

With calibration step, according to ISO 12164-2 in accordance to Sketch Nr. 1396, hardened and aged steel with international certificate.

Type HSK-A32 = HSK-B40 HSK-A40 = HSK-B50 HSK-A50 = HSK-B63 HSK-A63 = HSK-B80 HSK-A80 = HSK-B100 HSK-A100 = HSK-B125 HSK-A125 = HSK-B160 HSK-A160

Part Number STO-405-0009-004097 STO-405-0009-004096 STO-405-0009-004064 STO-405-0009-004065 STO-405-0009-004066 STO-405-0009-004067 STO-405-0009-004758 STO-405-0009-004759

Pre-measurement device for Spindle,

HSK spindle according to ISO 12164-2 and Sketch 1578 including dial indicator and certificate. (No master).

Type HSK-A32 = HSK-B40 HSK-A40 = HSK-B50 HSK-A50 = HSK-B63 HSK-A63 = HSK-B80 HSK-A80 = HSK-B100 HSK-A100 = HSK-B125 HSK-A125 = HSK-B160 HSK-A160

Part Number STO-411-2302-104713 STO-411-2302-104714 STO-411-2302-104715 STO-411-2302-104716 STO-411-2302-104717 STO-411-2302-104718 STO-411-2302-104777 STO-411-2302-107195

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

Run-Out Arbors
Spindle runout arbors offer a quick and easy way to verify that a machine spindle is running true after a crash, after a machine has been moved, or periodically as a performance check. Other sizes available on request.

HSK

d1

l1

Part Number

HSK-A25 HSK-A32 HSK-A40 HSK-A50 HSK-A63 HSK-A80 HSK-A100 CAT40 CAT50

20 24 24 32 40 40 40 40 40

140 180 180 236 346 346 349 320 320

SCH-4971-125,025 SCH-4971-150,032 SCH-4971-150,040 SCH-4971-200,050 SCH-4971-300,063 SCH-4971-300,080 SCH-4971-300,100 SCH-4970-300,040 SCH-4970-300,050

Test Arbor is in wooden box with certificate. Dimensions shown are in mm. Other sizes and custom arbors are available. Contact us for more information. A certificate of accuracy is included.

Other sizes available on request!

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

Power-Check Information The Power-Check and the Power-Check II are measuring devices used to check the force with which the tool is pulled into the spindle taper. The specified pull force is very important for quality of machining and, if included into your preventative maintenance schedule, will allow you to notice a reduction of pull force and prevent problems before they occur.

Easily exchange adapters for all tapered standards and sizes (CAT, ANSI, BT, MAS, HSK, CAPTO, special forms) The system is light, compact, and very easy to use. Adjustable Range to simulate the tolerance range of the tool/spindle The pull force is easily read on the LCD display in kN or klb

Power-Check

Technical Data
Measuring range Measuring system Display Power source Weight Temperature Range 2-75kN / 10-75 kN Straingage Big 3.5 digit LCD-display 9 volt battery Max. 6.6 lbs. 14F to 122F

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

Easily exchange adapters for all tapered standards and sizes (CAT, ANSI, BT, MAS, HSK, CAPTO, special forms) Has gripping channel for automatic tool change and positioning in the tool magazine Automatic Mode activates the unit by itself during the tool change More Compact than the PowerCheck and much more suitable for difficult space conditions Adjustable Range to simulate the tolerance range of the tool/spindle Energy Saving Mode for long battery life LED-display shows the measured force even in difficult lighting conditions Internal memory stores up to 8,000 measurements (machine ID, date, time, pull force, adjusted range) USB Connection to download the internal memory and to charge the internal battery Power-Check II

Technical Data
Measuring range Measuring system Display Charging process Weight Temperature Range 0.14-5 kN / 0.4-15 kN / 2-75 kN Straingage Big 3.5 digit LCD-display Via USB interface Max. 3.3 lbs. 60F to 95F

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

10

Order numbers
Basic unit Order number Power Check AOT-95.101.712.2.2 AOT-95.101.600.2.2 Order number Power Check II AOT-95.103.134.9.2 AOT-95.103.135.9.2 AOT-95.103.136.9.2 Adapter for HSK / manual operation Nominal size E 25 / F 32 A 32 / B 40 A 40 / B 50 A 50 / B 63 A 63 / B 80 A 80 / B 100 A 100 / B 125 A 125 / B 160 Measuring Range 2 - 15 kN 10 75 kN Measuring Range 0.14 - 5 kN 0.4 15 kN 2 75 kN

Order number AOT-95.600.069.9.2 AOT-95.600.070.9.2 AOT-95.600.071.9.2 AOT-95.600.072.9.2 AOT-95.600.073.9.2 AOT-95.600.074.9.2 AOT-95.600.075.9.2 AOT-95.600.076.9.2

Adapter for steep taper / manual operation Size DIN 69871 / 69872 ANSI B 5.50-09 ISO CAT ISO 7388 / 1 / 2 7388 / 1 / 2 Type B (SK) Type A
CAT 30 CAT 40 CAT 45 CAT 50 CAT 60 AOT-95.101.582.9.2 AOT-95.101.586.9.2 AOT-95.101.590.9.2 AOT-95.101.594.9.2 AOT-95.101.598.9.2 AOT-95.101.583.9.2 AOT-95.101.587.9.2 AOT-95.101.591.9.2 AOT-95.101.595.9.2 AOT-95.101.599.9.2

MAS 403-1982 BT / PT-I (45)

AOT-95.101.584.9.2 AOT-95.101.588.9.2 AOT-95.101.592.9.2 AOT-95.101.596.9.2 AOT-95.101.601.9.2

MAS 403-1982 BT / PT-II (30)

AOT-95.101.585.9.2 AOT-95.101.589.9.2 AOT-95.101.593.9.2 AOT-95.101.597.9.2 AOT-95.101.602.9.2

Adapter for Capto / manual operation Nominal Size C4 ISO 26623-1 C5 ISO 26623-1 C6 ISO 26623-1 C8 ISO 26623-1

Order Number AOT-95.601.481.9.2 AOT-95.601.482.9.2 AOT-95.601.266.9.2 AOT-95.601.483.9.2

Adapter for hollow shaft with gripper groove for automatic tool change. Nominal Size Order number A 63 / B 80 AOT-95.601.851.9.2 Adapter for steep taper with gripper groove for automatic tool change. Nominal size DIN 69871 / 69872 ISO 7388 / 1 / 2 Type A CAT (SK) 50 AOT- 95.103.097.9.2
Other adapters available on request!
Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

11

Cleaning Wipers
For cleaning the internal and external tapers and face.

For HSK-A/C/E 40 50 63 80 100

d1 mm 53 66 88 103 125

l1 mm 36 42 53 58 77

Part # SCH-4947-1,040 SCH-4947-1,050 SCH-4947-1,063 SCH-4947-1,080 SCH-4947-1,100

For HSK-A/C/E 25 32 40 50 63 80 100

d1 mm 32 46 46 55 67 85 105

l1 mm 125 140 145 155 170 180 200

Part # SCH-4914-19,000 SCH-4914-24,000 SCH-4914-30,000 SCH-4914-38,000 SCH-4914-48,000 SCH-4914-60,000 SCH-4914-75,000

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

12

QuickClean Tool Taper Cleaning Machine

Keep precision at the spindle interface by keeping tool holders clean..

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

13

Other sizes available on request!

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

14

Spindle Interface Solutions

As the exclusive U.S. distributor of OTTJakob steep taper or HSK drawbars and components, AME provides the most reliable and highest precision tool holding solutions in the world. OTT-Jakob is the gold standard, combining industry-leading technology with proven production processes to create durable, reliable tool holding products recognized worldwide for their accuracy, repeatability and uptime. You can count on OTTJakob products day after day, year after year. You can count on AME the same way. Our Spindle Interface Group backs every tool holding solution we sell with maintenance, repair and reconditioning services to ensure a long, productive life from your investment. AME engineers are also available for up-front application and integration assistance, so when you come to AME, you get a tool holding solution thats custom-tailored to your machines and your unique requirements.

OTT-JAKOB Power Drawbars and Components

hold cutting tools securely in place. Features include power-off clamping, intensified spring force with wedge mechanisms, compact design with minimal rotating mass, and quick-change design. AME is the exclusive North American distributor of OTT-JAKOB power drawbars and components.

Specialty tool holders

including steep taper, HSK and other designs are manufactured at AME for a variety of applications. Complete gauging capabilities ensure quality tooling.

AMEs Spindle Interface Group Services

and repairs all spindle interface components. Complete services are available to repair, rebuild, re-engineer or manufacture any drawbar or spindle shaft to industry standards. Twenty-four hour turnaround is available on drawbar repairs. AME has the machining resources and skilled personnel on site to complete virtually any machining task.

Advanced Machine & Engineering Co., 2500 N. Latham Street, Rockford, IL 61103 Tel.: 815-962-6076, Fax: 815-962-6483, E-Mail: [email protected] , Internet: www.ame.com/stotz

15