Flange Comparison

Flange
Comparison
Tables
NOTE
The information in this publication should not be relied upon as a substitute for detailed advice or as a basis for making a
decision. Whilst every care has been taken in the compilation of these tables, no guarantee is given, nor liability accepted
for their accuracy.
For precise data, particularly on flange thickness, refer to relevant Standard.
This flange information does not necessarily apply to valves and other pipeline equipment which are often designed and
manufactured to accommodate multiple flange standards. Consult relevant Manufacturers data for information on its products.
Copyright by Tyco Flow Control Pacific Pty Ltd 1996
ABN: 83 000 922 690
Please report any errors or omissions to Tyco Flow Control.
Head Office: PO Box 517 Nowra, NSW 2541, Australia
Phone (02) 4448 0300 Fax: (02) 4423 3232
Metric and Imperial Bolt Substitutions
Metric Imperial
Bolt size (mm) Bolt size (inches)
M12 = 0.47 inches 0.50 inch = 1/2 = 12.70 mm
M16 = 0.63 0.625 = 5/8 = 15.88
M20 = 0.79 0.75 = 3/4 = 19.05
M24 = 0.95 0.875 = 7/
8 = 22.23
M27 = 1.06 1.0 = 1 = 25.40
M30 = 1.18 1.125 = 11/8 = 28.58
M33 = 1.30 1.25 = 11/4 = 31.75
M36 = 1.42 1.375 = 13/8 = 34.93
M39 = 1.54 1.50 = 11/2 = 38.10
M45 = 1.77 1.75 = 13/4 = 44.45
M52 = 2.05 2.0 = 2 = 50.8
Notes:
The information in this publication should not be relied upon as a substitute for detailed advice or as a basis for making a decision. Whilst every
care has been taken in the compilation of these tables, no guarantee is given, nor liability accepted for their accuracy.
This flange information does not necessarily apply to valves and other pipeline equipment which are often designed and manufactured to
accommodate multiple flange standards. Consult relevant Manufacturers data for information on its products.
Copyright by Tyco International Inc. FCT/01/06
Tyco Flow Control reserves the right to change product designs and specifications without notice.
Flange Tables 15-3000mm
Metric and Imperial bolt substitutions per AS 2129.
While every care has been taken in the compilation of these tables, no guarantee
is given, nor liability accepted for their accuracy. For precise data, particularly on
flange thickness, refer to relevant standard. Please report any errors or omissions
to Tyco Flow Control Pacific Pty Ltd.
Copyright by Keystone International Inc.
Keystone reserves the right to change product designs and specifications without notice.
Flange Tables
1
/
2
''- 15mm
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
ASME/ANSI B 16.1:1989
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Flange Type Flange Dimensions Bolt Data
Standard Class O/side Raised Thickness Bolt No. Bolt Hole
Rating Dia. Face Iron Steel Circle of Size Size
Table Dia. Dia. Bolts Metric Inch
Notes:
There may be rounding or conversion deviations, but these should not exceed 1.5mm. If the deviation exceeds this tolerance it will be marked
with a letter and an explanation given in the footnote.
A 95 47 13 5 67 4 M12 - 14
C 95 47 13 5 67 4 M12 - 14
D 95 47 13 5 67 4 M12 - 14
E 95 47 13 6 67 4 M12 - 14
F 95 47 13 10 67 4 M12 - 14
H 115 57 16 13 83 4 M16 - 18
J 115 57 - 16 83 4 M16 - 18
K 115 64 - 19 83 4 M16 - 18
R 115 64 - 19 83 4 M16 - 18
S 125 64 - 22 89 4 M20 - 22
T 140 64 - 25 102 4 M20 - 22
14/16 95 47 13 5 67 4 M12 - 14
21/35 95 47 13 10 67 4 M12 - 14
125 89 35 11 - 60.3 4 - 1/2 15.9
250 - - - - - - - - -
150 88.9 35.1 - 11.2 60.5 4 - 1/2 15.7
300 95.3 35.1 - 14.2 66.5 4 - 1/2 15.7
600 95.3 35.1 - 14.2 66.5 4 - 1/2 15.7
900 120.7 35.1 - 22.4 82.6 4 - 3/4 22.4
1500 120.7 35.1 - 22.4 82.6 4 - 3/4 22.4
2500 133.4 35.1 - 30.2 88.9 4 - 3/4 22.4
PN20 88.9 35 - 11.5 60.5 4 M14 - 16
PN50 95 35 - 14.5 66.5 4 M14 - 16
PN110 95 35 - 14.5 66.5 4 M14 - 16
PN150 120 35 - 22.5 82.5 4 M20 - 22
PN260 120 35 - 22.5 82.5 4 M20 - 22
PN420 135 35 - 30.5 89 4 M20 - 22
PN6 80 40 12 12 55 4 M10 - 11
PN10 95 45 14 14 65 4 M12 - 14
PN16 95 45 14 14 65 4 M12 - 14
PN25 95 45 16 16 65 4 M12 - 14
PN40 95 45 16 16 65 4 M12 - 14
PN64 105 45 - 20 75 4 M12 - 14
PN100 105 45 - 20 75 4 M12 - 14
PN5 80 44 12 9 60 4 M10 - 12
PN10 95 51 16 12 70 4 M12 - 15
PN16 95 51 - 12 70 4 M12 - 15
PN20 95 51 16 14 70 4 M12 - 15
PN30 115 55 - 18 80 4 M16 - 19
PN40 115 55 - 20 80 4 M16 - 19
PN63 120 55 - 23 85 4 M16 - 19
No data below 25mm
Flange Tables
3
/
4
''- 20mm
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
There may be rounding or conversion deviations, but these should not exceed 1.5mm. If the deviation exceeds this tolerance it will be
marked with a letter and an explanation given in the footnote.
The information in this publication should not be relied upon as a substitute for detailed advice or as a basis for making a decision. Whilst
every care has been taken in the compilation of these tables, no guarantee is given, nor liability accepted for their accuracy.
A 100 53 13 5 73 4 M12 - 14
C 100 53 13 5 73 4 M12 - 14
D 100 53 13 5 73 4 M12 - 14
E 100 53 13 6 73 4 M12 - 14
F 100 53 13 10 73 4 M12 - 14
H 115 57 16 13 83 4 M16 - 18
J 115 57 - 16 83 4 M16 - 18
K 115 64 - 19 83 4 M16 - 18
R 115 64 - 19 83 4 M16 - 18
S 125 64 - 22 89 4 M20 - 22
T 140 64 - 25 102 4 M20 - 22
14/16 100 53 13 5 73 4 M12 - 14
21/35 100 53 13 10 73 4 M12 - 14
125 98 43 11 - 69.8 4 - 1/2 15.9
250 - - - - - - - - -
150 98.6 43 - 12.7 69.9 4 - 1/2 15.7
300 117.3 43 - 15.7 82.6 4 - 5/8 19.1
600 117.3 43 - 15.7 82.6 4 - 5/8 19.1
900 130 43 - 25.4 88.9 4 - 3/4 22.4
1500 130 43 - 25.4 88.9 4 - 3/4 22.4
2500 139.7 43 - 31.8 95.3 4 - 3/4 22.4
PN20 100 43 - 13 70 4 M14 - 16
PN50 120 43 - 16 82.5 4 M16 - 18
PN110 120 43 - 16 82.5 4 M16 - 18
PN150 130 43 - 25.5 89 4 M20 - 22
PN260 130 43 - 25.5 89 4 M20 - 22
PN420 140 43 - 32 95 4 M20 - 22
PN6 90 50 14 14 65 4 M10 - 11
PN10 105 58 16 16 75 4 M12 - 14
PN16 105 58 16 16 75 4 M12 - 14
PN25 105 58 18 18 75 4 M12 - 14
PN40 105 58 18 18 75 4 M12 - 14
PN64 130 58 - 22 90 4 M16 - 18
PN100 130 58 - 22 90 4 M16 - 18
PN5 85 49 14 10 65 4 M10 - 12
PN10 100 56 18 14 75 4 M12 - 15
PN16 100 56 - 14 75 4 M12 - 15
PN20 100 56 18 16 75 4 M12 - 15
PN30 120 60 - 18 85 4 M16 - 19
PN40 120 60 - 20 85 4 M16 - 19
PN63 135 60 - 25 95 4 M20 - 23
No data below 25mm
Flange Tables 1''- 25mm
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 115 63 13 5 83 4 M12 - 14
C 115 63 13 5 83 4 M12 - 14
D 115 65 13 5 83 4 M12 - 14
E 115 63 13 7 83 4 M12 - 14
F 120 63 13 10 87 4 M16 - 18
H 120 64 19 14 87 4 M16 - 18
J 120 64 - 19 87 4 M16 - 18
K 125 76 - 22 95 4 M16 - 18
R 125 76 - 22 95 4 M16 - 18
S 140 76 - 25 102 4 M20 - 22
T 145 76 - 29 108 4 M20 - 22
14/16 115 63 13 5 83 4 M12 - 14
21/35 120 63 13 10 87 4 M16 - 18
125 108 51 11.2 - 79.2 4 - 1/2 15.7
250 124 68 17.5 - 88.9 4 - 5/8 19.1
150 108 50.8 - 14.2 79.2 4 - 1/2 15.7
300 124 50.8 - 17.5 88.9 4 - 5/8 19.1
600 124 50.8 - 17.5 88.9 4 - 5/8 19.1
900 149.4 50.8 - 28.4 101.6 4 - 7/8 25.4
1500 149.4 50.8 - 28.4 101.6 4 - 7/8 25.4
2500 158.8 50.8 - 35.1 108 4 - 7/8 25.4
PN20 110 51 - 14.5 79.5 4 M14 - 16
PN50 125 51 - 17.5 89 4 M16 - 18
PN110 125 51 - 17.5 89 4 M16 - 18
PN150 150 51 - 29 101.5 4 M24 - 26
PN260 150 51 - 29 101.5 4 M24 - 26
PN420 160 51 - 35 108 4 M24 - 26
PN6 100 60 14 14 75 4 M10 - 11
PN10 115 68 16 16 85 4 M12 - 14
PN16 115 68 16 16 85 4 M12 - 14
PN25 115 68 18 18 85 4 M12 - 14
PN40 115 68 18 18 85 4 M12 - 14
PN64 140 68 - 24 100 4 M16 - 18
PN100 140 68 - 24 100 4 M16 - 18
PN5 95 59 14 10 75 4 M10 - 12
PN10 125 67 18 14 90 4 M16 - 19
PN16 125 67 - 14 90 4 M16 - 19
PN20 125 67 20 16 90 4 M16 - 19
PN30 130 70 - 20 95 4 M16 - 19
PN40 130 70 - 22 95 4 M16 - 19
PN63 140 70 - 27 100 4 M20 - 23
Flange Tables 1
1
/
4
''- 32mm
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 120 67 16 6 87 4 M12 - 14
C 120 67 16 6 87 4 M12 - 14
D 120 67 16 6 87 4 M12 - 14
E 120 67 16 8 87 4 M12 - 14
F 135 74 16 13 98 4 M16 - 18
H 135 76 22 17 98 4 M16 - 18
J 135 76 - 19 98 4 M16 - 18
K 135 76 - 22 98 4 M16 - 18
R 135 76 - 22 98 4 M16 - 18
S 145 83 - 29 108 4 M20 - 22
T 160 83 - 32 121 4 M24 - 26
14/16 120 67 16 6 87 4 M12 - 14
21/35 135 74 16 13 98 4 M16 - 18
125 117 64 13 - 88.9 4 - 1/2 15.9
250 133.4 77 19.1 - 98.6 4 - 5/8 19.1
150 117.3 63.5 - 15.7 88.9 4 - 1/2 15.7
300 133.4 63.5 - 19.1 98.6 4 - 5/8 19.1
600 133.4 63.5 - 20.6 98.6 4 - 5/8 19.1
900 158.8 63.5 - 28.4 111.3 4 - 7/8 25.4
1500 158.8 63.5 - 28.4 111.3 4 - 7/8 25.4
2500 184.2 63.5 - 38.1 130 4 - 1 28.4
PN20 120 63.5 - 16 89 4 M14 - 16
PN50 135 63.5 - 19.5 98.5 4 M16 - 18
PN110 135 63.5 - 21 98.5 4 M16 - 18
PN150 160 63.5 - 29 111 4 M24 - 26
PN260 160 63.5 - 29 111 4 M24 - 26
PN420 185 63.5 - 38.5 130 4 M27 - 29.5
PN6 120 70 16 16 90 4 M12 - 14
PN10 140 78 18 16 100 4 M16 - 18
PN16 140 78 18 16 100 4 M16 - 18
PN25 140 78 20 18 100 4 M16 - 18
PN40 140 78 20 18 100 4 M16 - 18
PN64 155 78 - 24 110 4 M20 - 22
PN100 155 78 - 24 110 4 M20 - 22
PN5 115 70 16 12 90 4 M12 - 15
PN10 135 76 20 16 100 4 M16 - 19
PN16 135 76 - 16 100 4 M16 - 19
PN20 135 76 20 18 100 4 M16 - 19
PN30 140 80 - 22 105 4 M16 - 19
PN40 140 80 - 24 105 4 M16 - 19
PN63 150 80 - 30 110 4 M20 - 23
Flange Tables 1
1
/
2
''- 40mm
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 135 78 16 6 98 4 M12 - 14
C 135 78 16 6 98 4 M12 - 14
D 135 78 16 6 98 4 M12 - 14
E 135 78 16 9 98 4 M12 - 14
F 140 81 16 13 105 4 M16 - 18
H 140 83 22 17 105 4 M16 - 18
J 140 83 - 22 105 4 M16 - 18
K 150 89 - 25 114 4 M20 - 22
R 150 89 - 25 114 4 M20 - 22
S 160 89 - 29 121 4 M20 - 22
T 170 89 - 35 133 8 M20 - 22
14/16 135 78 16 6 98 4 M12 - 14
21/35 140 81 16 13 105 4 M16 - 18
125 127 7.3 14.2 - 98.4 4 - 1/2 15.9
250 155.4 90.4 20.6 - 114.3 4 - 3/4 22.4
150 127 73.2 - 17.5 98.6 4 - 1/2 15.7
300 155.4 73.2 - 20.6 114.3 4 - 3/4 22.4
600 155.4 73.2 - 22.4 114.3 4 - 3/4 22.4
900 177.8 73.2 - 31.8 124 4 - 1 28.4
1500 177.8 73.2 - 31.8 124 4 - 1 28.4
2500 203.2 73.2 - 44.5 146.1 4 - 11/8 31.8
PN20 130 73.2 - 17.5 98.5 4 M14 - 16
PN50 155 73 - 21 114.5 4 M20 - 22
PN110 155 73 - 22.5 114.5 4 M20 - 22
PN150 180 73 - 32 124 4 M27 - 29.5
PN260 180 73 - 32 124 4 M27 - 29.5
PN420 205 73 - 44.5 146 4 M30 - 32.5
PN6 130 80 16 16 100 4 M12 - 14
PN10 150 88 18 16 110 4 M16 - 18
PN16 150 88 18 16 110 4 M16 - 18
PN25 150 88 20 20 110 4 M16 - 18
PN40 150 88 20 20 110 4 M16 - 18
PN64 170 88 - 26 125 4 M20 - 22
PN100 170 88 - 26 125 4 M20 - 22
PN5 120 75 16 12 95 4 M12 - 15
PN10 140 81 20 16 105 4 M16 - 19
PN16 140 81 - 16 105 4 M16 - 19
PN20 140 81 22 18 105 4 M16 - 19
PN30 160 90 - 22 120 4 M20 - 23
PN40 160 90 - 24 120 4 M20 - 23
PN63 175 90 - 32 130 4 M22 - 25
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 150 90 16 8 114 4 M16 - 18
C 150 90 19 8 114 4 M16 - 18
D 150 90 17 8 114 4 M16 - 18
E 150 90 19 10 114 4 M16 - 18
F 165 103 19 16 127 4 M16 - 18
H 165 102 25 19 127 4 M16 - 18
J 165 102 - 25 127 4 M20 - 22
K 165 102 - 25 127 8 M16 - 18
R 165 102 - 25 127 8 M16 - 18
S 170 89 - 32 133 8 M20 - 22
T 185 102 - 35 146 8 M20 - 22
14/16 150 90 19 8 114 4 M16 - 18
21/35 165 103 19 16 127 4 M16 - 18
125 152 92 16 - 120.6 4 - 5/8 19
250 165.1 106 22.4 - 127 8 - 5/8 19.1
150 152.4 91.9 - 19.1 120.7 4 - 5/8 19.1
300 165.1 91.9 - 22.4 127 8 - 5/8 19.1
600 165.1 91.9 - 25.4 127 8 - 5/8 19.1
900 215.9 91.9 - 38.1 165.1 8 - 7/8 25.4
1500 215.9 91.9 - 38.1 165.1 8 - 7/8 25.4
2500 235 91.9 - 50.8 171.5 8 - 1 28.4
PN20 150 92 - 19.5 120.5 4 M16 - 18
PN50 165 92 - 22.5 127 8 M16 - 18
PN110 165 92 - 25.5 127 8 M16 - 18
PN150 215 92 - 38.5 165 8 M24 - 26
PN260 215 92 - 38.5 165 8 M24 - 26
PN420 235 92 - 51 171.5 8 M27 - 29.5
PN6 140 90 16 16 110 4 M12 - 14
PN10 165 102 20 18 125 4 M16 - 18
PN16 165 102 20 18 125 4 M16 - 18
PN25 165 102 22 20 125 4 M16 - 18
PN40 165 102 22 20 125 4 M16 - 18
PN64 180 102 - 26 135 4 M20 - 22
PN100 195 102 - 28 145 4 M24 - 26
PN5 130 85 16 14 105 4 M12 - 15
PN10 155 96 20 16 120 4 M16 - 19
PN16 155 96 20 16 120 8 M16 - 19
PN20 155 96 22 18 120 8 M16 - 19
PN30 165 105 - 22 130 8 M16 - 19
PN40 165 105 - 26 130 8 M16 - 19
PN63 185 105 - 34 145 8 M20 - 23
Flange Tables 2
1
/
2
''- 65mm
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 165 103 17 8 127 4 M16 - 18
C 165 103 19 8 127 4 M16 - 18
D 165 103 17 8 127 4 M16 - 18
E 165 103 19 10 127 4 M16 - 18
F 185 122 19 16 146 8 M16 - 18
H 185 114 25 19 146 8 M16 - 18
J 185 114 - 25 146 8 M20 - 22
K 185 114 - 29 146 8 M20 - 22
R 185 114 - 29 146 8 M20 - 22
S 185 102 - 32 146 8 M20 - 22
T 205 114 - 41 165 8 M24 - 26
14/16 165 103 19 8 127 4 M16 - 18
21/35 185 122 19 16 146 8 M16 - 18
125 178 105 17.5 - 139.7 4 - 5/8 19
250 190.5 125.5 25.4 - 149.4 8 - 3/4 22.4
150 177.8 104.6 - 22.4 139.7 4 - 5/8 19.1
300 190.5 104.6 - 25.4 149.4 8 - 3/4 22.4
600 190.5 104.6 - 28.4 149.4 8 - 3/4 22.4
900 244.3 104.6 - 41.1 190.5 8 - 1 28.4
1500 244.3 104.6 - 41.1 190.5 8 - 1 28.4
2500 266.7 104.6 - 57.2 196.9 8 - 11/8 31.8
PN20 180 105 - 22.5 139.5 4 M16 - 18
PN50 190 105 - 25.5 149 8 M20 - 22
PN110 190 105 - 29 149 8 M20 - 22
PN150 245 105 - 41.5 190.5 8 M27 - 29.5
PN260 245 105 - 41.5 190.5 8 M27 - 29.5
PN420 265 105 - 57.5 197 8 M30 - 32.5
PN6 160 110 16 16 130 4 M12 - 14
PN10 185 122 20 18 145 4 M16 - 18
PN16 185 122 20 18 145 4 M16 - 18
PN25 185 122 24 22 145 8 M16 - 18
PN40 185 122 24 22 145 8 M16 - 18
PN64 205 122 - 26 160 8 M20 - 22
PN100 220 122 - 30 170 8 M24 - 26
PN5 155 110 18 14 130 4 M12 - 15
PN10 175 116 22 18 140 4 M16 - 19
PN16 175 116 22 18 140 8 M16 - 19
PN20 175 116 24 20 140 8 M16 - 19
PN30 200 130 - 26 160 8 M20 - 23
PN40 200 130 - 30 160 8 M20 - 23
PN63 220 130 - 38 175 8 M22 - 25
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 185 122 17 10 146 4 M16 - 18
C 185 122 19 10 146 4 M16 - 18
D 185 122 19 10 146 4 M16 - 18
E 185 122 19 11 146 4 M16 - 18
F 205 141 19 16 165 8 M16 - 18
H 205 127 29 22 165 8 M16 - 18
J 205 127 - 32 165 8 M20 - 22
K 205 127 - 32 165 8 M20 - 22
R 205 127 - 32 165 8 M20 - 22
S 205 114 - 35 165 8 M24 - 26
T 235 127 - 48 191 8 M27 - 30
14/16 185 122 19 10 146 4 M16 - 18
21/35 205 141 19 16 165 8 M16 - 18
125 190 127 19 - 152.4 4 - 5/8 19
250 209.6 145 28.4 - 168.1 8 - 3/4 22.4
150 190.5 127 - 23.9 152.4 4 - 5/8 19.1
300 209.6 127 - 28.4 168.1 8 - 3/4 22.4
600 209.6 127 - 31.8 168.1 8 - 3/4 22.4
900 241.3 127 - 38.1 190.5 8 - 7/8 25.4
1500 266.7 127 - 47.8 203.2 8 - 11/8 31.8
2500 304.8 127 - 66.5 228.6 8 - 11/4 35.1
PN20 190 127 - 24 152.5 4 M16 - 18
PN50 210 127 - 29 168.5 8 M20 - 22
PN110 210 127 - 32 168.5 8 M20 - 22
PN150 240 127 - 38.5 190.5 8 M24 - 26
PN260 265 127 - 48 203 8 M30 - 32.5
PN420 305 127 - 67 228.5 8 M33 - 35.5
PN6 190 128 18 18 150 4 M16 - 18
PN10 200 138 22 20 160 8 M16 - 18
PN16 200 138 22 20 160 8 M16 - 18
PN25 200 138 26 24 160 8 M16 - 18
PN40 200 138 26 24 160 8 M16 - 18
PN64 215 138 - 30 170 8 M20 - 22
PN100 230 138 - 34 180 8 M24 - 26
PN5 180 121 18 14 145 4 M16 - 19
PN10 185 126 22 18 150 8 M16 - 19
PN16 200 132 24 20 160 8 M20 - 23
PN20 200 132 26 22 160 8 M20 - 23
PN30 210 140 - 28 170 8 M20 - 23
PN40 210 140 - 32 170 8 M20 - 23
PN63 230 140 - 40 185 8 M22 - 25
Flange Tables 3
1
/
2
''- 90mm
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 205 141 19 10 165 4 M16 - 18
C 205 141 19 10 165 4 M16 - 18
D 205 141 19 10 165 4 M16 - 18
E 205 141 19 12 165 8 M16 - 18
F 215 154 22 19 178 8 M16 - 18
H 215 140 29 22 178 8 M16 - 18
J 215 140 - 32 178 8 M20 - 22
K 230 140 - 32 184 8 M24 - 26
R 230 140 - 32 184 8 M24 - 26
S 230 127 - 38 191 8 M24 - 26
T 265 146 - 54 216 8 M30 - 33
14/16 205 141 19 10 165 4 M16 - 18
21/35 215 154 22 19 178 8 M16 - 18
125 215.9 - 20.6 - 177.8 8 - 5/8 19.1
250 228.6 - 30.2 - 184.2 8 - 3/4 22.4
150 215.9 139.7 - 23.9 177.8 8 - 5/8 19.1
300 228.6 139.7 - 30.2 184.2 8 - 3/4 22.4
600 228.6 139.7 - 35.1 184.2 8 - 7/8 25.4
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 190 131 18 14 155 4 M16 - 19
PN10 195 136 22 18 160 8 M16 - 19
PN16 210 145 24 20 170 8 M20 - 23
PN20 210 145 28 24 170 8 M20 - 23
PN30 230 150 - 30 185 8 M22 - 25
PN40 230 150 - 34 185 8 M22 - 25
PN63 255 150 - 42 205 8 M24 - 27
No data
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 215 154 19 10 178 4 M16 - 18
C 215 154 22 10 178 4 M16 - 18
D 215 154 19 10 178 4 M16 - 18
E 215 154 22 13 178 8 M16 - 18
F 230 167 22 19 191 8 M16 - 18
H 230 152 32 25 191 8 M16 - 18
J 230 152 - 35 191 8 M20 - 22
K 240 152 - 35 197 8 M24 - 26
R 240 152 - 35 197 8 M24 - 26
S 250 159 - 41 203 8 M27 - 30
T 285 159 - 57 235 8 M30 - 33
14/16 215 154 22 10 178 4 M16 - 18
21/35 230 167 22 19 191 8 M16 - 18
125 229 157 23.9 - 190.5 8 - 5/8 19.1
250 254 176 31.8 - 200.2 8 - 3/4 22.4
150 228.6 157.2 - 23.9 190.5 8 - 5/8 19.1
300 254 157.2 - 31.75 200.2 8 - 3/4 22.4
600 273.1 157.2 - 38.1 215.9 8 - 7/8 25.4
900 292.1 157.2 - 44.5 235 8 - 11/8 31.8
1500 311.2 157.2 - 53.8 241.3 8 - 11/4 35.1
2500 355.6 157.2 - 76.2 273.1 8 - 11/2 41.1
PN20 230 157.5 - 24 190.5 8 M16 - 18
PN50 255 157.5 - 32 200 8 M20 - 22
PN110 275 157.5 - 38.5 216 8 M24 - 26
PN150 290 157.5 - 44.5 235 8 M30 - 32.5
PN260 310 157.5 - 54 241.5 8 M33 - 35.5
PN420 355 157.5 - 76.5 273 8 M39 - 42
PN6 210 148 18 18 170 4 M16 - 18
PN10 220 158 24 20 180 8 M16 - 18
PN16 220 158 24 20 180 8 M16 - 18
PN25 235 162 28 26 190 8 M20 - 22
PN40 235 162 28 26 190 8 M20 - 22
PN64 250 162 - 32 200 8 M24 - 26
PN100 265 162 - 36 210 8 M27 - 30
PN5 200 141 20 16 165 8 M16 - 19
PN10 210 151 24 18 175 8 M16 - 19
PN16 225 160 26 22 185 8 M20 - 23
PN20 225 160 28 24 185 8 M20 - 23
PN30 240 160 - 32 195 8 M22 - 25
PN40 250 165 - 36 205 8 M22 - 25
PN63 270 165 - 44 220 8 M24 - 27
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 255 186 19 13 210 4 M16 - 18
C 255 186 22 13 210 8 M16 - 18
D 255 186 21 13 210 8 M16 - 18
E 255 186 22 14 210 8 M16 - 18
F 280 207 25 22 235 8 M20 - 22
H 280 178 35 29 235 8 M20 - 22
J 280 178 - 38 235 8 M24 - 26
K 280 178 - 41 235 12 M24 - 26
R 280 178 - 41 235 12 M24 - 26
S 285 191 - 44 235 12 M24 - 26
T 325 210 - 67 273 12 M30 - 33
14/16 255 186 22 13 210 8 M16 - 18
21/35 280 207 25 22 235 8 M20 - 22
125 254 186 23.9 - 215.9 8 - 3/4 22.4
250 279.4 211 35 - 235 8 - 3/4 22.4
150 254 185.7 - 23.9 215.9 8 - 3/4 22.4
300 279.4 185.7 - 35.1 235 8 - 3/4 22.4
600 330.2 185.7 - 44.5 266.7 8 - 1 28.4
900 349.3 185.7 - 50.8 279.4 8 - 11/4 35.1
1500 374.7 185.7 - 73.2 292.1 8 - 11/2 41.1
2500 419.1 185.7 - 91.9 323.9 8 - 13/4 47.8
PN20 255 186 - 24 216 8 M20 - 22
PN50 280 186 - 35 235 8 M20 - 22
PN110 330 186 - 44.5 267 8 M27 - 29.5
PN150 350 186 - 51 279.5 8 M33 - 35.5
PN260 375 186 - 73.5 292 8 M33 - 42
PN420 420 186 - 92.5 324 8 M45 - 48
PN6 240 178 20 20 200 8 M16 - 18
PN10 250 188 26 22 210 8 M16 - 18
PN16 250 188 26 22 210 8 M16 - 18
PN25 270 188 30 28 220 8 M24 - 26
PN40 270 188 30 28 220 8 M24 - 26
PN64 295 188 - 34 240 8 M27 - 30
PN100 315 188 - 42 250 8 M30 - 33
PN5 235 176 20 16 200 8 M16 - 19
PN10 250 182 24 20 210 8 M20 - 23
PN16 270 195 26 22 225 8 M22 - 25
PN20 270 195 30 26 225 8 M22 - 25
PN30 275 195 - 36 230 8 M22 - 25
PN40 300 200 - 40 250 8 M24 - 27
PN63 325 200 - 50 265 8 M30 - 33
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 280 211 21 13 235 4 M16 - 18
C 280 211 22 13 235 8 M16 - 18
D 280 211 21 13 235 8 M16 - 18
E 280 207 22 17 235 8 M20 - 22
F 305 232 25 22 260 12 M20 - 22
H 305 210 35 29 260 12 M20 - 22
J 305 210 - 38 260 12 M24 - 26
K 305 210 - 41 260 12 M24 - 26
R 305 210 - 44 260 12 M24 - 26
S 325 210 - 51 273 12 M27 - 30
T 375 229 - 73 318 12 M33 - 36
14/16 280 211 22 13 235 8 M16 - 18
21/35 305 232 25 22 260 12 M20 - 22
125 279.4 216 25.4 - 241.3 8 - 3/4 22.4
250 317.5 246 36.6 - 269.7 12 - 3/4 22.4
150 279.4 215.9 - 25.4 241.3 8 - 3/4 22.4
300 317.5 215.9 - 36.6 269.7 12 - 3/4 22.4
600 355.6 215.9 - 47.8 292.1 12 - 1 28.4
900 381 215.9 - 55.6 317.5 12 - 11/8 31.8
1500 393.7 215.9 - 82.6 317.5 12 - 13/8 38.1
2500 482.6 215.9 - 108 368.3 8 - 2 53.8
PN20 280 216 - 25.5 241.5 8 M20 - 22
PN50 320 216 - 37 270 12 M20 - 22
PN110 355 216 - 48 292 12 M27 - 29.5
PN150 380 216 - 56 317.5 12 M30 - 32.5
PN260 395 216 - 83 317.5 12 M36 - 39
PN420 485 216 - 108 368.5 8 M52 - 55
PN6 265 202 20 20 225 8 M16 - 18
PN10 285 212 26 22 240 8 M20 - 22
PN16 285 212 26 22 240 8 M20 - 22
PN25 300 218 34 30 250 8 M24 - 26
PN40 300 218 34 30 250 8 M24 - 26
PN64 345 218 - 36 280 8 M30 - 33
PN100 355 218 - 48 290 12 M30 - 33
PN5 265 206 22 18 230 8 M16 - 19
PN10 280 212 26 22 240 8 M20 - 23
PN16 305 230 28 24 260 12 M22 - 25
PN20 305 230 32 28 260 12 M22 - 25
PN30 325 235 - 38 275 12 M24 - 27
PN40 355 240 - 44 295 12 M30 - 33
PN63 365 240 - 54 305 12 M30 - 33
Flange Tables 7''-175mm
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 300 232 22 18 260 8 M20 - 23
PN10 305 237 26 22 265 12 M20 - 23
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 335 268 22 13 292 8 M16 - 18
C 335 268 25 13 292 8 M16 - 18
D 335 268 22 13 292 8 M16 - 18
E 335 264 25 19 292 8 M20 - 22
F 370 296 29 25 324 12 M20 - 22
H 370 260 38 32 324 12 M20 - 22
J 370 260 - 41 324 12 M24 - 26
K 370 260 - 48 318 12 M27 - 30
R 370 260 - 51 324 12 M27 - 30
S 415 273 - 64 356 12 M33 - 36
T 475 298 - 89 406 12 M39 - 42
14/16 335 268 25 13 292 8 M16 - 18
21/35 370 296 29 25 324 12 M20 - 22
125 342.9 270 28.4 - 298.5 8 - 3/4 22.4
250 381 303 41.1 - 330.2 12 - 7/8 25.4
150 342.9 269.7 - 28.4 298.5 8 - 3/4 22.4
300 381 269.7 - 41.1 330.2 12 - 7/8 25.4
600 419.1 269.7 - 55.6 349.3 12 - 11/8 31.8
900 469.9 269.7 - 63.5 393.7 12 - 13/8 38.1
1500 482.6 269.7 - 91.9 393.7 12 - 15/8 44.5
2500 552.5 269.7 - 127 438.2 12 - 2 53.8
PN20 345 270 - 29 298.5 8 M20 - 22
PN50 380 270 - 41.5 330 12 M24 - 26
PN110 420 270 - 55.5 349 12 M30 - 32.5
PN150 470 270 - 63.5 393.5 12 M36 - 39
PN260 485 270 - 92 393.5 12 M42 - 45
PN420 550 270 - 127 438 12 M52 - 55
PN6 320 258 22 22 280 8 M16 - 18
PN10 340 268 26 24 295 8 M20 - 22
PN16 340 268 30 24 295 12 M20 - 22
PN25 360 278 34 28 310 12 M24 - 26
PN40 375 285 40 34 320 12 M27 - 30
PN64 415 285 - 46 345 12 M33 - 36
PN100 430 285 - 60 360 12 M33 - 36
PN5 320 252 24 20 280 8 M20 - 23
PN10 330 262 26 22 290 12 M20 - 23
PN16 350 275 30 26 305 12 M22 - 25
PN20 350 275 34 30 305 12 M22 - 25
PN30 370 280 - 42 320 12 M24 - 27
PN40 405 290 - 50 345 12 M30 - 33
PN63 425 290 - 60 360 12 M30 - 33
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - -
14 370 - 25 - 324 8 M16 - 18
16 370 300 24 19 324 8 M16 - 18
21 405 324 29 30 356 12 M24 - 26
35 405 324 41 38 356 12 M24 - 26
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
PN100 - - - - - - - - -
PN5 345 277 24 20 305 12 M20 - 23
PN10 350 282 28 22 310 12 M20 - 23
PN16 - - - - - - - - -
PN20 - - - - - - - - -
AS 2129: 2000
AS 4087: 2004
ANSI B 16.1: 1998 (Class 125, 250)
BS 1560 Section 3.2 1989
(Class 125, 250)
ANSI B16.5 1996 (Class 150-2500)
BS 1560 Section 3.1 1989
(Class 150-2500)
ISO 7005-1:1992
(PN 20-420)
ISO 7005-1:1992
(PN 6-40)
DIN 2501: 1972
(PN6-100)
EN 1092-2: 1997
(PN 6-40)
JIS B 2238: 1996
JIS B 2239: 2004
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 405 328 24 16 356 8 M20 - 22
C 405 328 25 16 356 8 M20 - 22
D 405 328 25 16 356 8 M20 - 22
E 405 328 25 22 356 12 M20 - 22
F 430 349 29 29 381 12 M24 - 26
H 430 311 41 35 381 12 M24 - 26
J 430 311 - 48 381 12 M27 - 30
K 430 311 - 51 381 16 M27 - 30
R 430 311 - 60 387 16 M27 - 30
S 485 330 - 79 425 16 M33 - 36
T 560 356 - 108 489 16 M39 - 42
14/16 405 328 25 16 356 8 M20 - 22
21/35 430 349 29 29 381 12 M24 - 26
125 406.4 324 30.2 - 362 12 - 7/8 25.4
250 444.5 357 47.8 - 387.4 16 - 1 28.4
150 406.4 323.9 - 30.2 362 12 - 7/8 25.4
300 444.5 323.9 - 47.8 387.4 16 - 1 28.4
600 508 323.9 - 63.5 431.8 16 - 11/4 35.1
900 546.1 323.9 - 69.9 469.9 16 - 13/8 38.1
1500 584.2 323.9 - 108 482.6 12 - 17/8 50.8
2500 673.1 323.9 - 165.1 539.8 12 - 21/2 66.5
PN20 405 324 - 30.5 362 12 M24 - 26
PN50 445 324 - 48 387.5 16 M27 - 29.5
PN110 510 324 - 63.5 432 16 M33 - 35.5
PN150 545 324 - 70 470 16 M36 - 39
PN260 585 324 - 108 482.5 12 M48 - 51
PN420 675 324 - 165.5 539.5 12 M64 - 68
PN6 375 312 24 24 335 12 M16 - 18
PN10 395 320 28 26 350 12 M20 - 25
PN16 405 320 32 26 355 12 M24 - 26
PN25 425 335 36 32 370 12 M27 - 30
PN40 450 345 46 42 385 12 M30 - 33
PN64 470 345 - 54 400 12 M33 - 36
PN100 505 345 - 72 430 12 M36 - 39
PN5 385 317 26 22 345 12 M20 - 23
PN10 400 324 30 24 355 12 M22 - 25
PN16 430 345 34 28 380 12 M24 - 27
PN20 430 345 38 34 380 12 M24 - 28
PN30 450 345 - 48 390 12 M30 - 33
PN40 475 355 - 56 410 12 M30 - 33
PN63 500 355 - 68 430 12 M36 - 39
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 455 378 24 19 406 8 M20 - 22
C 455 378 29 16 406 12 M20 - 22
D 455 378 25 19 406 12 M20 - 22
E 455 374 29 25 406 12 M24 - 26
F 490 406 32 32 438 16 M24 - 26
H 490 362 44 41 438 16 M24 - 26
J 490 362 - 51 438 16 M27 - 30
K 490 362 - 57 432 16 M30 - 33
R 510 362 - 70 457 16 M30 - 33
S 580 381 - 92 508 16 M39 - 42
T 655 413 - 121 572 16 M45 - 48
14/16 455 378 29 16 406 12 M20 - 22
21/35 490 406 32 32 438 16 M24 - 26
125 482.6 381 31.8 - 431.8 12 - 7/8 25.4
250 520.7 418 50.8 - 450.9 16 - 11/8 31.8
150 482.6 381 - 31.75 431.8 12 - 7/8 25.4
300 520.7 381 - 50.8 450.9 16 - 11/8 31.8
600 558.8 381 - 66.5 489 20 - 11/4 35.1
900 609.6 381 - 79.2 533.4 20 - 13/8 38.1
1500 673.1 381 - 124 571.5 16 - 2 53.8
2500 762 381 - 184.2 619.3 12 - 23/4 73.2
PN20 485 381 - 32 432 12 M24 - 26
PN50 520 381 - 51 451 16 M30 - 32.5
PN110 560 381 - 67 489 20 M33 - 35.5
PN150 610 381 - 79.5 533.5 20 M36 - 39
PN260 675 381 - 124 571.5 16 M52 - 55
PN420 760 381 - 184.5 619 12 M70 - 74
PN6 440 365 24 24 395 12 M20 - 22
PN10 445 370 28 26 400 12 M20 - 22
PN16 460 378 32 28 410 12 M24 - 26
PN25 485 395 40 38 430 16 M27 - 30
PN40 515 410 50 50 450 16 M30 - 33
PN64 530 410 - 62 460 16 M33 - 36
PN100 585 410 - 84 500 16 M39 - 42
PN5 430 360 28 22 390 12 M20 - 23
PN10 445 368 32 24 400 16 M22 - 25
PN16 480 395 36 30 430 16 M24 - 27
PN20 480 395 40 36 430 16 M24 - 27
PN30 515 405 - 52 450 16 M30 - 33
PN40 540 410 - 60 470 16 M36 - 39
PN63 560 410 - 77 485 16 M36 - 39
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 525 438 25 22 470 8 M24 - 26
C 525 438 32 19 470 12 M24 - 26
D 525 438 29 22 470 12 M24 - 26
E 525 438 32 29 470 12 M24 - 26
F 550 459 35 35 495 16 M27 - 30
H 550 419 48 48 495 16 M27 - 30
J 550 419 - 57 495 16 M30 - 33
K 570 419 - 67 508 16 M33 - 36
R 585 419 - 79 527 16 M33 - 36
S 650 438 - 105 578 20 M39 - 42
T - - - - - - - - -
14/16 525 438 32 19 470 12 M24 - 26
21/35 550 459 35 35 495 16 M27 - 30
125 533.4 413 35.1 - 476.3 12 - 1 28.4
250 584.2 481 53.8 - 514.4 20 - 11/8 31.8
150 533.4 412.8 - 35.1 476.3 12 - 1 28.4
300 584.2 412.8 - 53.8 514.4 20 - 11/8 31.8
600 603.3 412.8 - 69.9 527.1 20 - 13/8 38.1
900 641.4 412.8 - 85.9 558.8 20 - 11/2 41.1
1500 749.3 412.8 - 133.4 635 16 - 21/4 60.5
2500 - - - - - - - - -
PN20 535 413 - 35 476 12 M27 - 29.5
PN50 585 413 - 54 514.5 20 M30 - 32.5
PN110 605 413 - 70 527 20 M36 - 39
PN150 640 413 - 86 559 20 M39 - 42
PN260 750 413 - 133.5 635 16 M56 - 60
PN420 - - - - - - - - -
PN6 490 415 26 26 445 12 M20 - 22
PN10 505 430 30 28 460 16 M20 - 22
PN16 520 438 36 32 470 16 M24 - 26
PN25 555 450 44 42 490 16 M30 - 33
PN40 580 465 54 56 510 16 M33 - 36
PN64 600 465 - 72 525 16 M36 - 39
PN100 655 465 - 95 560 16 M45 - 48
PN5 480 403 30 24 435 12 M22 - 25
PN10 490 413 34 26 445 16 M22 - 25
PN16 540 440 38 34 480 16 M30 - 33
PN20 540 440 44 40 480 16 M30 - 33
PN30 560 450 - 54 495 16 M30 - 33
PN40 585 455 - 64 515 16 M36 - 39
PN63 615 455 - 81 530 16 M42 - 46
AS 2129: 2000
AS 4087: 2004
ANSI B 16.1: 1998
(Class 125, 250)
BS 1560 Section 3.2 1989
(Class 125, 250)
ANSI B16.5 1996
(Class 150-2500)
BS 1560 Section 3.1 1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
ISO 7005-1:1992 (PN 6-40)
DIN 2501: 1972 (PN6-100)
EN 1092-2: 1997 (PN 6-40)
JIS B 2238: 1996
JIS B 2239: 2004
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
14 550 - 32 - 495 12 M24 - 26
16 550 463 33 30 495 12 M24 - 26
21 580 485 35 38 521 16 M27 - 30
35 580 485 51 48 521 16 M27 - 30
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
PN100 - - - - - - - - -
5 - - - - - - - - -
10 - - - - - - - - -
16 - - - - - - - - -
20 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 580 489 27 22 521 12 M24 - 26
C 580 489 32 19 521 12 M24 - 26
D 580 489 29 22 521 12 M24 - 26
E 580 489 32 32 521 12 M24 - 26
F 610 516 35 41 552 20 M27 - 30
H 610 483 51 54 552 20 M27 - 30
J 610 483 - 64 552 20 M30 - 33
K 630 483 - 76 565 20 M33 - 36
R 640 483 - 89 584 20 M33 - 36
S 745 495 - 117 660 20 M45 - 48
T - - - - - - - - -
14/16 580 489 32 19 521 12 M24 - 26
21/35 610 516 35 41 552 20 M27 - 30
125 596.9 470 36.6 - 539.8 16 - 1 28.4
250 647.7 535 57.2 - 571.5 20 - 11/4 35.1
150 596.9 469.9 - 36.6 539.8 16 - 1 28.4
300 647.7 469.9 - 57.2 571.5 20 - 11/4 35.1
600 685.8 469.9 - 76.2 603.3 20 - 11/2 41.1
900 704.9 469.9 - 88.9 616 20 - 15/8 44.5
1500 825.5 469.9 - 146.1 704.9 16 - 21/2 66.5
2500 - - - - - - - - -
PN20 600 470 - 37 540 16 M27 - 29.5
PN50 650 470 - 57.5 571.5 20 M33 - 35.5
PN110 685 470 - 76.5 603 20 M39 - 42
PN150 705 470 - 89 616 20 M42 - 45
PN260 825 470 - 146.5 705 16 M64 - 68
PN420 - - - - - - - - -
PN6 540 465 28 28 495 16 M20 - 22
PN10 565 482 32 32 515 16 M24 - 26
PN16 580 490 38 36 525 16 M27 - 30
PN25 620 505 48 46 550 16 M33 - 36
PN40 660 535 62 64 585 16 M36 - 39
PN64 670 535 - 78 585 16 M39 - 42
PN100 715 535 - 106 620 16 M45 - 48
PN5 540 463 30 24 495 16 M22 - 25
PN10 560 475 36 28 510 16 M24 - 27
PN16 605 495 42 38 540 16 M30 - 33
PN20 605 495 50 46 540 16 M30 - 33
PN30 630 510 - 60 560 16 M36 - 39
PN40 645 515 - 70 570 16 M36 - 39
PN63 680 515 - 89 590 16 M42 - 46
A 640 552 27 22 584 12 M24 - 26
C 640 552 35 22 584 12 M24 - 26
D 640 532 32 25 584 12 M24 - 26
E 640 552 35 35 584 16 M24 - 26
F 675 571 38 44 610 20 M30 - 33
H 675 533 54 60 610 20 M30 - 33
J 675 533 - 70 610 20 M33 - 36
K 720 572 - 89 654 20 M36 - 39
R 735 572 - 98 673 20 M36 - 39
S - - - - - - - - -
T - - - - - - - - -
14/16 640 552 35 22 584 12 M24 - 26
21/35 675 571 38 44 610 20 M30 - 33
125 635 533 39.6 - 577.9 16 - 11/8 31.8
250 711.2 592 60.5 - 628.7 24 - 11/4 35.1
150 635 533.4 - 39.6 577.9 16 - 11/8 31.8
300 711.2 533.4 - 60.5 628.7 24 - 11/4 35.1
600 743 533.4 - 82.6 654.1 20 - 15/8 44.5
900 787.4 533.4 - 101.6 685.8 20 - 17/8 50.8
1500 914.4 533.4 - 162 774.7 16 - 23/4 73.2
2500 - - - - - - - - -
PN20 635 533.5 - 40 578 16 M30 - 32.5
PN50 710 533.5 - 60.5 628.5 24 M33 - 35.5
PN110 745 533.5 - 83 654 20 M42 - 45
PN150 785 533.5 - 102 686 20 M48 - 51
PN260 915 533.5 - 162 774.5 16 M70 - 74
PN420 - - - - - - - - -
PN6 595 520 30 30 550 16 M20 - 22
PN10 615 532 32 36 565 20 M24 - 26
PN16 640 550 50 40 585 20 M27 - 30
PN25 670 550 50 52 600 20 M33 - 35.5
PN40 685 560 - 68 610 20 M36 - 39
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 605 523 30 24 555 16 M22 - 25
PN10 620 530 38 30 565 20 M24 - 27
PN16 675 560 46 40 605 20 M30 - 33
PN20 675 560 54 48 605 20 M30 - 33
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 705 609 29 25 641 12 M24 - 26
C 705 609 38 25 641 16 M24 - 26
D 705 609 32 29 641 16 M24 - 26
E 705 609 38 38 641 16 M24 - 26
F 735 634 41 51 673 24 M30 - 33
H 735 597 57 67 673 24 M30 - 33
J 735 597 - 79 673 24 M33 - 36
K 785 622 - 98 711 20 M39 - 42
R 805 622 - 105 730 20 M39 - 42
S - - - - - - - - -
T - - - - - - - - -
14/16 705 609 38 25 641 16 M24 - 26
21/35 735 634 41 51 673 24 M30 - 33
125 698.5 584 42.9 - 635 20 - 11/8 31.8
250 774.7 649 63.5 - 685.8 24 - 11/4 35.1
150 698.5 584.2 - 42.9 635 20 - 11/8 31.8
300 774.7 584.2 - 63.5 685.8 24 - 11/4 35.1
600 812.8 584.2 - 88.9 723.9 24 - 15/8 44.5
900 857.3 584.2 - 108 749.3 20 - 2 53.8
1500 984.3 584.2 - 177.8 831.9 16 - 3 79.2
2500 - - - - - - - - -
PN20 700 584.5 - 43 635 20 M30 - 32.5
PN50 775 584.5 - 63.5 686 24 M33 - 35.5
PN110 815 584.5 - 89 724 24 M42 - 45
PN150 855 584.5 - 108 749.5 20 M52 - 55
PN260 985 584.5 - 178 832 16 M76 - 80
PN420 - - - - - - - - -
PN6 645 570 30 30 600 20 M20 - 22
PN10 670 585 34 38 620 20 M24 - 26
PN16 715 610 42 44 650 20 M30 - 33
PN25 730 615 52 58 660 20 M33 - 36
PN40 755 615 - - 670 20 M39 - 42
PN64 800 615 - - 705 20 M45 - 48
PN100 870 615 - - 760 20 M52 - 56
PN5 655 573 32 24 605 20 M22 - 25
PN10 675 585 40 30 620 20 M24 - 27
PN16 730 615 50 42 660 20 M30 - 33
PN20 730 615 58 50 660 20 M30 - 33
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 760 663 30 25 699 12 M27 - 30
C 760 663 38 25 699 16 M27 - 30
D 760 637 35 29 699 16 M27 - 30
E 760 663 38 44 699 16 M27 - 30
F 785 685 41 54 724 24 M30 - 33
H 785 648 60 70 724 24 M30 - 33
J 785 648 - 86 724 24 M33 - 36
K 870 673 - 105 781 20 M52 - 55
R 895 673 - 114 806 20 M52 - 55
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 750 641 - 46 692 20 M33 - 35.5
PN50 840 641 - 66.5 743 24 M39 - 42
PN110 870 641 - 95 778 24 M45 - 48
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 720 630 32 26 665 20 M24 - 27
PN10 745 640 42 32 680 20 M30 - 33
PN16 795 670 54 44 720 20 M36 - 39
PN20 795 670 62 52 720 20 M36 - 39
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 825 720 30 25 756 12 M27 - 30
C 825 720 41 29 756 16 M27 - 30
D 825 720 35 32 756 16 M27 - 30
E 825 717 41 48 756 16 M30 - 33
F 850 739 44 57 781 24 M33 - 36
H 850 699 64 76 781 24 M33 - 36
J 850 699 - 92 781 24 M36 - 39
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 825 720 41 29 756 16 M27 - 30
21/35 850 739 44 57 781 24 M33 - 36
125 812.8 692 47.8 - 749.3 20 - 11/4 35.1
250 914.4 770 69.9 - 812.8 24 - 11/2 50.8
150 812.8 692.2 - 47.8 749.3 20 - 11/4 35.1
300 914.4 692.2 - 69.9 812.8 24 - 11/2 41.2
600 934.8 692.2 - 101.6 838.2 24 - 17/8 50.8
900 1041.4 692.2 - 139.7 901.7 20 - 21/2 66.5
1500 1168.4 692.2 - 203.2 990.6 16 - 31/2 91.9
2500 - - - - - - - - -
PN20 815 692.5 - 48 749.5 20 M33 - 35.5
PN50 915 692.5 - 70 813 24 M39 - 42
PN110 940 692.5 - 102 838 24 M48 - 51
PN150 1040 692.5 - 140 901.5 20 M64 - 68
PN260 1170 692.5 - 203.5 990.5 16 M90 - 94
PN420 - - - - - - - - -
PN6 755 670 30 32 705 20 M24 - 26
PN10 780 685 36 42 725 20 M27 - 30
PN16 840 725 48 52 770 20 M33 - 36
PN25 845 720 56 66 770 20 M36 - 39
PN40 890 735 - - 795 20 M45 - 48
PN64 930 735 - - 820 20 M52 - 56
PN100 990 735 - - 875 20 M56 - 62
PN5 770 680 32 26 715 20 M24 - 27
PN10 765 690 44 32 730 24 M30 - 33
PN16 845 720 58 46 770 24 M36 - 39
PN20 845 720 66 54 770 24 M36 - 39
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 845 745 32 25 781 16 M27 - 30
C 875 777 44 - 813 20 M27 - 30
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 870 749 - 68.5 806 24 M33 - 35.5
PN50 970 749 - 79.5 876 28 M42 - 45
PN110 1015 749 - 108 914 28 M48 - 51
PN150 1085 749 - 140 952 20 M70 - 74
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 825 735 34 26 770 24 M24 - 27
PN10 845 740 46 34 780 24 M30 - 33
PN16 895 770 - 48 820 24 M36 - 39
PN20 945 790 - 60 850 24 M45 - 48
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 870 770 32 25 806 16 M27 - 30
C 910 809 44 - 845 20 M27 - 30
D 910 809 38 35 845 20 M27 - 30
E 910 806 44 51 845 20 M30 - 33
F 935 815 48 60 857 24 M33 - 36
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 910 809 44 - 845 20 M27 - 30
21/35 935 815 48 60 857 24 M33 - 36
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 925 800 - 71.5 863 28 M33 - 35.5
PN50 1035 800 - 85.5 940 28 M42 - 45
PN110 1075 800 - 111 965 28 M52 - 55
PN150 1165 800 - 143 1022 20 M76 - 80
PN260 - 800 - - - - - - -
PN420 - 800 - - - - - - -
PN6 860 775 32 34 810 24 M24 - 26
PN10 895 800 40 46 840 24 M27 - 30
PN16 910 795 54 58 840 24 M33 - 36
PN25 960 820 - - 875 24 M39 - 42
PN40 995 840 - - 900 24 M45 - 48
PN64 1045 840 - - 935 24 M52 - 56
PN100 1145 840 - - 1020 24 M64 - 70
PN5 875 785 34 26 820 24 M24 - 27
PN10 905 800 48 34 840 24 M30 - 33
PN16 960 820 - 50 875 24 M39 - 42
PN20 995 840 - 64 900 24 M45 - 48
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-25)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 945 847 32 25 883 20 M27 - 30
C 995 888 48 - 927 20 M30 - 33
D 995 888 41 41 927 20 M30 - 33
E 995 885 48 54 927 20 M33 - 36
F 1015 898 51 67 940 28 M33 - 36
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 995 888 48 - 927 20 M30 - 33
21/35 1015 898 51 67 940 28 M33 - 36
125 984.3 - 53.8 - 914.4 28 - 11/4 35.1
250 109.2 944.6 76.2 - 997 28 - 13/4 50.8
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 985 857 - 74.5 914 28 M33 - 35.5
PN50 1090 857 - 92 997 28 M45 - 48
PN110 1130 857 - 114 1022 28 M52 - 55
PN150 1230 857 - 149 1086 20 M76 - 80
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 945 840 36 28 880 24 M30 - 33
PN10 970 855 50 36 900 24 M30 - 33
PN16 1020 880 - 52 935 24 M39 - 42
PN20 1080 900 - 68 970 24 M52 - 56
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 1005 904 32 25 940 20 M27 - 30
C 1060 942 48 - 984 20 M33 - 36
D 1060 942 41 41 984 20 M33 - 36
E 1060 942 48 54 984 20 M33 - 36
F 1060 942 52 68 984 28 M33 - 36
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 1060 942 48 - 984 20 M33 - 36
21/35 1060 942 52 68 984 28 M33 - 36
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1060 914 - 81 978 28 M39 - 42
PN50 1150 914 - 98.5 1054 28 M48 - 51
PN110 1195 914 - 117 1080 28 M56 - 60
PN150 1315 914 - 159 1156 20 M82 - 86
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 975 880 34 38 920 24 M27 - 29.5
PN10 1015 905 44 52 950 24 M30 - 33
PN16 1025 900 58 64 950 24 M36 - 39
PN25 1085 930 - - 990 24 M45 - 48
PN40 1140 960 - - 1030 24 M52 - 56
PN64 1165 960 - - 1050 24 M56 - 62
PN100 - - - - - - - - -
PN5 995 890 36 28 930 24 M30 - 33
PN10 1020 905 52 36 950 28 M30 - 33
PN16 1085 930 - 54 990 24 M45 - 48
PN20 1140 960 - 72 1030 24 M52 - 56
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-25)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 1030 929 32 29 965 20 M27 - 30
C 1090 974 51 - 1016 20 M33 - 36
D 1090 974 41 44 1016 20 M33 - 36
E 1090 974 51 57 1016 20 M33 - 36
F 1090 974 54 54 1016 32 M33 - 36
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1110 965 - 82.5 1029 32 M39 - 42
PN50 1205 965 - 102 1105 28 M48 - 51
PN110 1245 965 - 121 1130 28 M56 - 60
PN150 1395 965 - 165 1226 20 M82 - 86
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 1045 940 38 28 980 24 M30 - 33
PN10 1070 955 52 36 1000 28 M30 - 33
PN16 1135 980 - 56 1040 24 M45 - 48
PN20 1200 1020 - 74 1090 24 M52 - 56
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 1105 1005 35 29 1041 24 M27 - 30
C 1175 1050 51 - 1092 24 M33 - 36
D 1175 1050 44 48 1092 24 M33 - 36
E 1175 1050 51 64 1092 24 M33 - 36
F 1185 1060 57 76 1105 32 M36 - 39
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 1175 1050 51 - 1092 24 M33 - 36
21/35 1185 1060 57 76 1105 32 M36 - 39
125 1168.4 - 60.5 - 1085.9 32 - 11/2 41.1
250 1270 1109.7 85.9 - 1168.4 32 - 2 57.2
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1170 1022 - 90.5 1086 36 M39 - 42
PN50 1270 1022 - 105 1168 32 M52 - 55
PN110 1315 1022 - 124 1194 28 M64 - 68
PN150 1460 1022 - 171 1289 20 M90 - 94
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 1075 980 36 42 1020 24 M27 - 30
PN10 1115 1005 46 56 1050 28 M30 - 33
PN16 1125 1000 62 72 1050 28 M36 - 39
PN25 1185 1030 55.5 58 1090 28 M45 - 48
PN40 1285 1070 - - 1170 28 M52 - 56
PN64 1285 1070 - - 1170 28 M56 - 62
PN100 - - - - - - - - -
PN5 1095 990 38 30 1030 24 M30 - 33
PN10 1120 1005 54 38 1050 28 M30 - 33
PN16 1185 1030 - 58 1090 28 M45 - 48
PN20 1250 1070 - 76 1140 28 M52 - 56
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-25)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1240 1073 - 87.5 1150 32 M39 - 42
PN50 1170 1029 - 108 1092 32 M39 - 42
PN110 1270 1054 - 152 1162 28 M56 - 60
PN150 1460 1099 - 190 1289 20 M90 - 94
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 1180 1082 35 29 1118 24 M27 - 30
C 1255 1133 54 - 1175 24 M33 - 36
D 1255 1133 44 51 1175 24 M33 - 36
E 1255 1130 54 67 1175 24 M36 - 39
F 1275 1149 60 83 1194 36 M36 - 39
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 1255 1133 54 - 1175 24 M33 - 36
21/35 1275 1149 60 83 1194 36 M36 - 39
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1290 1124 - 90.5 1200 36 M39 - 42
PN50 1240 1086 - 114 1156 32 M42 - 45
PN110 1320 1111 - 159 1213 32 M56 - 60
PN150 1510 1162 - 197 1340 24 M90 - 94
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 1175 1080 36 46 1120 28 M27 - 30
PN10 1230 1110 50 62 1160 28 M33 - 36
PN16 1255 1115 66 78 1170 28 M39 - 42
PN25 1320 1140 60 - 1210 28 M52 - 56
PN40 1360 1180 - - 1250 28 M52 - 56
PN64 1415 1180 - - 1290 28 M64 - 70
PN100 - - - - - - - - -
PN5 1195 1090 40 32 1130 28 M30 - 33
PN10 1235 1110 58 40 1160 28 M36 - 39
PN16 1320 1140 - 62 1210 28 M52 - 56
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-25)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 1346.2 - 66.5 - 1257.3 36 - 11/2 41.1
250 1447.8 1281.2 93.7 - 1339.9 36 - 2 57.2
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1345 1194 - 97.5 1257 36 M39 - 42
PN50 1290 1137 - 119 1206 32 M42 - 45
PN110 1405 1168 - 168 1283 28 M64 - 68
PN150 1560 1213 - 206 1391 24 M90 - 94
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 1346.2 - 66.5 - 1257.3 36 - 11/2 41.1
250 1447.8 1281.2 93.7 - 1339.9 36 - 2 57.2
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1405 1245 - 102 1314 40 M39 - 42
PN50 1355 1194 - 124 1264 32 M45 - 48
PN110 1455 1226 - 173 1334 32 M64 - 68
PN150 1650 1270 - 214 1464 24 M95 - 99
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 1305 1200 42 32 1240 28 M30 - 33
PN10 1345 1220 62 42 1270 28 M36 - 39
PN16 1420 1240 - 66 1310 32 M52 - 56
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1455 1295 - 103 1365 40 M39 - 42
PN50 1415 1245 - 129 1321 28 M48 - 51
PN110 1510 1276 - 179 1391 32 M64 - 68
PN150 1735 1334 - 225 1537 24 M100 - 105
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-25)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 1415 1317 38 32 1353 28 M27 - 30
C 1490 1368 60 - 1410 32 M33 - 36
D 1490 1368 51 60 1410 32 M33 - 36
E 1490 1365 60 79 1410 32 M36 - 39
F 1530 1385 67 95 1441 40 M39 - 42
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 1490 1368 60 - 1410 32 M33 - 36
21/35 1530 1385 67 95 1441 40 M39 - 42
125 1511.3 - 69.9 - 1422.4 44 - 11/2 41.1
250 1651 1484.4 101.6 - 1543.1 40 - 2 57.2
150 - - - - - - - - -
300 1651 1484.4 101.6 - 1543.1 40 - 2 57.2
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1510 1359 - 108 1422 44 M39 - 42
PN50 1465 1308 - 133 1372 32 M48 - 51
PN110 1595 1334 - 189 1460 32 M70 - 74
PN150 1785 1384 - 233 1588 24 M100 - 105
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 1405 1295 40 56 1340 32 M30 - 33
PN10 1455 1330 56 74 1380 32 M36 - 39
PN16 1485 1330 - 94 1390 32 M45 - 48
PN25 1530 1350 - - 1420 32 M52 - 56
PN40 1575 1380 - - 1460 32 M56 - 62
PN64 1665 1380 - - 1530 32 M72 - 78
PN100 - - - - - - - - -
PN5 1420 1305 46 34 1350 32 M30 - 33
PN10 1465 1325 66 44 1380 32 M36 - 39
PN16 1530 1350 - 70 1420 32 M52 - 56
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1570 1410 - 111 1480 44 M45 - 48
PN50 1530 1359 - 140 1429 32 M52 - 55
PN110 1670 1384 - 197 1524 28 M76 - 80
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1625 1460 - 116 1537 44 M45 - 48
PN50 1580 1410 - 144 1480 32 M52 - 55
PN110 1720 1435 - 203 1575 32 M76 - 80
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 1682.8 - 76.2 - 1593.9 44 - 13/4 50.8
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1685 1511 - 121 1594 44 M45 - 48
PN50 1660 1467 - 152 1549 28 M56 - 60
PN110 1780 1492 - 210 1632 32 M76 - 80
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 1575 1460 48 34 1505 32 M30 - 33
PN10 1630 1480 70 48 1540 36 M42 - 45
PN16 1700 1510 - 76 1590 32 M56 - 62
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
A 1700 1573 44 35 1615 32 M33 - 36
C - - - - - - - - -
D 1700 1573 57 60 1615 36 M33 - 36
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1745 1575 - 124 1651 48 M45 - 48
PN50 1710 1518 - 154 1600 28 M56 - 60
PN110 1855 1543 - 217 1695 32 M82 - 86
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 1630 1510 - - 1560 36 M33 - 36
PN10 1675 1535 - - 1590 36 M39 - 42
PN16 1685 1530 - - 1590 36 M45 - 48
PN25 1755 1560 - - 1640 36 M56 - 60
PN40 1795 1600 - - 1680 36 M56 - 62
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 1755 1560 - 78 1640 36 M56 - 62
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1805 1626 - 129 1708 48 M45 - 48
PN50 1760 1575 - 159 1651 32 M56 - 60
PN110 1905 1600 - 222 1746 32 M82 - 86
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 1854.2 - 79.2 - 1759 52 - 13/4 50.8
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 1855 1676 - 132 1759 52 M45 - 48
PN50 1810 1625 - 164 1702 32 M56 - 60
PN110 1995 1657 - 233 1822 28 M90 - 94
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 1730 1615 52 36 1660 36 M30 - 33
PN10 1795 1635 74 50 1700 40 M42 - 45
PN16 1865 1670 - 80 1750 36 M36 - 62
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
A 1910 1783 48 38 1825 32 M33 - 36
C - - - - - - - - -
D 1910 1780 60 64 1825 40 M36 - 39
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 1830 1710 - - 1760 40 M33 - 36
PN10 1915 1760 - - 1820 40 M45 - 48
PN16 1930 1750 - - 1820 40 M52 - 56
PN25 1975 1780 - - 1860 40 M56 - 60
PN40 2025 1815 - - 1900 40 M64 - 70
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A 2110 1974 60 44 2019 36 M36 - 39
C - - - - - - - - -
D 2110 1971 67 73 2019 44 M39 - 42
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 2197.1 - 88.9 - 2095.5 60 - 13/4 50.8
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 2045 1920 - - 1970 44 M36 - 39
PN10 2115 1960 - - 2020 44 M45 - 48
PN16 2130 1950 - - 2020 44 M52 - 56
PN25 2195 1985 - - 2070 44 M64 - 69
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
A - - - - - - - - -
C - - - - - - - - -
D 2345 2202 70 67 2250 44 M39 - 42
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 2265 2125 - - 2180 48 M39 - 42
PN10 2325 2170 - - 2230 48 M45 - 48
PN16 2345 2150 - - 2230 48 M56 - 61
PN25 2425 2210 - - 2300 48 M64 - 69
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 2533.7 - 98.6 - 2425.7 64 - 2 57.2
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D 2560 2406 73 83 2460 44 M45 - 48
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 2475 2335 - - 2390 52 M39 - 42
PN10 2550 2370 - - 2440 52 M52 - 55
PN16 2555 2360 - - 2440 52 M56 - 62
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D 2775 2619 83 92 2673 52 M45 - 48
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 2876.6 - 108 - 2755.9 68 - 21/4 63.5
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 2685 2545 - - 2600 56 M39 - 42
PN10 2760 2570 - - 2650 56 M52 - 55
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D - - - - - - - - -
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 2905 - - - 2810 60 M45 - 48
PN10 2960 - - - 2850 60 M52 - 55
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D 3200 3036 89 102 3090 56 M45 - 48
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 3115 2960 - - 3020 64 M45 - 48
PN10 3180 3000 - - 3070 64 M52 - 55
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
A - - - - - - - - -
C - - - - - - - - -
D 3430 3254 95 114 3315 60 M52 - 55
E - - - - - - - - -
F - - - - - - - - -
H - - - - - - - - -
J - - - - - - - - -
K - - - - - - - - -
R - - - - - - - - -
S - - - - - - - - -
T - - - - - - - - -
14/16 - - - - - - - - -
21/35 - - - - - - - - -
125 - - - - - - - - -
250 - - - - - - - - -
150 - - - - - - - - -
300 - - - - - - - - -
600 - - - - - - - - -
900 - - - - - - - - -
1500 - - - - - - - - -
2500 - - - - - - - - -
PN20 - - - - - - - - -
PN50 - - - - - - - - -
PN110 - - - - - - - - -
PN150 - - - - - - - - -
PN260 - - - - - - - - -
PN420 - - - - - - - - -
PN6 3315 3160 - - 3220 68 M45 - 48
PN10 3405 3210 - - 3290 68 M56 - 62
PN16 - - - - - - - - -
PN25 - - - - - - - - -
PN40 - - - - - - - - -
PN64 - - - - - - - - -
PN100 - - - - - - - - -
PN5 - - - - - - - - -
PN10 - - - - - - - - -
PN16 - - - - - - - - -
PN20 - - - - - - - - -
PN30 - - - - - - - - -
PN40 - - - - - - - - -
PN63 - - - - - - - - -
AS 2129:1994
(Table A to T)
AS 4087:1993
(Class 14,16,21,35)
(Class 125,250)
BS 1560-Section 3.2:1989
(Class 125,250)
(Class 150-2500)
BS 1560-Section 3.1:1989
(Class 150-2500)
ISO 7005-1:1992 (PN 20-420)
DIN 2501-Part 1 (PN 6-100)
ISO 7005-1:1992 (PN 6-40)
BS 4504-Section 3.2:1989 (PN6-40)
JIS B 2210:1984 (PN 5-63)
Notes:
FCT/7/06
Tyco Flow Control Pacific Pty Ltd
ABN 83 000922 690
Head Office:
114 Albatross Road (PO Box 517)
Nowra NSW Australia 2541
Phone: (02) 4448 0300
Fax: (02) 4423 3232
www.tycoflowcontrol.com

Flange Comparison

Uploaded by

Copyright:

Available Formats

Flange Comparison

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Flange Comparison

Uploaded by

Copyright:

Available Formats

Flange

You might also like