Scribd
Upload
233 views1 page

Ee2352 Solid State Drives Syllabus

This document provides an overview of the EE2352 course on solid state drives. The course aims to study the operation of electric drives controlled by power electronic converters and introduce controller design concepts. The objectives are to understand steady-state and transient motor load system dynamics, analyze converter-fed DC drives, study induction motor drives, understand differences between synchronous and induction motor drives, and analyze and design controllers for closed-loop solid-state DC drives using simulation software. The course covers drive characteristics, converter-fed DC motor drives, controller design for drives, induction motor drives, and synchronous motor drives over 5 units spanning 45 periods.

Uploaded by

kgurumoorthi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
233 views1 page

Ee2352 Solid State Drives Syllabus

This document provides an overview of the EE2352 course on solid state drives. The course aims to study the operation of electric drives controlled by power electronic converters and introduce controller design concepts. The objectives are to understand steady-state and transient motor load system dynamics, analyze converter-fed DC drives, study induction motor drives, understand differences between synchronous and induction motor drives, and analyze and design controllers for closed-loop solid-state DC drives using simulation software. The course covers drive characteristics, converter-fed DC motor drives, controller design for drives, induction motor drives, and synchronous motor drives over 5 units spanning 45 periods.

Uploaded by

kgurumoorthi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

EE2352 - SOLID STATE DRIVES

LTPC

3003 AIM To study and understand the operation of electric drives controlled from a power electronic converter and to introduce the design concepts of controllers. OBJECTIVES To understand the stable steady-state operation and transient dynamics of a motor load system. To study and analyze the operation of the converter / chopper fed dc drive and to solve simple problems. To study and understand the operation of both classical and modern induction motor drives. To understand the differences between synchronous motor drive and induction motor drive and to learn the basics of permanent magnet synchronous motor drives. To analyze and design the current and speed controllers for a closed loop solid-state DC motor drive and simulation using a software package UNIT I DRIVE CHARACTERISTICS 9 Equations governing motor load dynamics - steady state stability - Multi quadrantdynamics Acceleration, deceleration, starting and stopping - load torque characteristicsof various drives. UNIT II CONVERTER / CHOPPER FED DC MOTOR DRIVE 9 Steady state analysis of the single and three phase fully controlled converter fed separately excited D.C motor drive - Continuous and discontinuous conduction Time ratio and current limit control 4 quadrant operation of converter. UNIT III DESIGN OF CONTROLLERS FOR DRIVES 9 Transfer function for DC motor, load and converter Closed loop control with current and speed feedback - Armature voltage control and field weakening mode control, Design of controllers: Current controller and speed controller - Converter selection and characteristics - Use of simulation software package. UNIT IV INDUCTION MOTOR DRIVES 9 Stator voltage control energy efficient drive - v/f control, constant air-gap flux field weakening mode - voltage/current fed inverters - Block diagram of vector control - closed loop control. UNIT V SYNCHRONOUS MOTOR DRIVES 9 V/f control and self-control of synchronous motor Marginal angle control and power factor control Permanent magnet synchronous motor Black diagram of closed loop control.

TOTAL: 45 PERIODS
TEXT BOOKS 1. Gopal K.Dubey, Power Semi conductor controlled drives Prentice Hall Inc., New Jersey 1989. 2. Bimal K. Bose. Modern Power Electronics and AC Drives, PHI / Pearson Education, 2002. REFERENCES: 1. N.K.De and S.K.Sen Electrical Drives PHI, 2006 9th print. 2. Murphy J.M.D. and Turnbull, Thyristor control of AC Motor Pergamon Press Oxford 1988. 3. R. Krishnan, Electric Motor & Drives Modeling, Analysis and Control, Prentice Hall of India, 2001.

You might also like