THE TERRACOTTA FAADE

ArGeTon

ArGeTon TERRACOTTA FAADE

ArGeTon was developed as a back-ventilated faade cladding made from clay at the beginning of the 1980s. The aim was to create a timeless modern faade with the unmistakable character of clay as a natural product.

Today, almost 30 years later, the name ArGeTon stands for quality, aesthetics and creativity. The success story is based on a systematic and future-oriented product development, service-oriented sales and systematic quality assurance of a large group. ArGeTon is backed by Wienerberger AG the largest manufacturer of bricks in the world.

The building of the Council of Europe in Strasbourg the winner of two awards was clad with a chocolate brown ArGeTon faade.

The success is based on dialogue and expertise, which is why in future too you will be advised exclusively by experts. We prepare the best solution for every project working in cooperation with you. We look forward to the tasks and challenges you have in store for us.

SUsTAINABLE ELEGANCE
The ArGeTon faade enhances new and modern buildings and lends refurbished properties a contemporary character. Combined with steel, glass or wood, it is elegant, natural and timelessly perfect. ArGeTon faades also keep their good looks for decades:  A clever water runoff system avoids the accumulation of dirt.  The ceramic colours remain constant and strong even when exposed to tough weathering conditions.  The faade is acknowledged to be particularly re-resistant.  The joint prole of the faade protects against lateral shift of the tile-plates, the penetration of impact rain and rattling of the places in the wind.

PRODUCTION
In a roller kiln conceived especially for this purpose, the extruded tileplates are red at high temperatures, individually and carefully coordinated depending on their respective shades. The exact dimensioning of the ArGeTon tile-plates is guaranteed by a special calibrating facility the essential element of the precise joint grid which lends the faade its overall impression.

TESTED SECURITY: The ArGeTon Faade is BALL-sHOOTING REsIsTANT

ArGeTon GmbH was the rst manufacture of ceramic faade tile-plates to pass the test for ball-throwing safety in compliance with DIN 18032-3. The high strength of the ArGeTon tile-plate and the new B/85 xing clips, which can be attached to the carrier rails without additional tools, are impressive features. The ArGeTon faades easily maintains its condition, making the ceramic fa de particularly suitable for use on public buildings such as schools.

ArGeTon pRODUCT RANGE

TAMPA
The classic tile-plate for a clean-cut building appearance: clear and simple in form and without grooves.

TERZO
Like strips or small straps: a special impression is created by two false joints.

TERZO 2
Two false joints of different width in the surface create an interesting faade look.

TERZO 3
A unique joint pattern created by three false joints in the surface.

LINEO 4
A stylish horizontal linear structure created by four 3 mm deep grooves.

LINEO 9
9 grooves in the surface for an accentuated and unusual faade look.

Other surfaces and colours can of course be provided. Speak to us.

DANZA
The overlap of the individual panels creates a fascinating play of shadow, depending on how the light falls on the building faade.

ArGeLite
Perfect looks combined with simple and secure assembly. The ArGeLite panel is very well suited to building refurbishments in view of its optimised weight.

sUN sCREEN BARRO

In addition to its function as an architectural design element the brick bar can also be used as a sun shade and screen.

ELLIPTIC BARRO
Elliptic barros can be used as sun shade and screen. As a design element they serve to open up the faade.

CURVED BARRO
Rounded outer and inner corners, convex and concave faade areas, the round cladding of a bay: varied design ideas put impressively into practice.

FULL CERAMIC CORNER

Straight-line, clean cornering for a perfect terracotta faade down to the very last detail.

ARCHITECTURAL tour

The sand-coloured iridescent engobe surface is responsible for the animated structure of this administrative building in Gooiland, Netherlands.

The special glazed blue colour of the tile-plates lends an individually cool and elegant look to this modern administrative complex in Eindhoven, Netherlands.

The two buildings stand as a landmark in Klaipedia, Lithuanias port on the Baltic. The warm and strong natural red of the faade creates a visual bridge to the roofs of the old city.

Characteristic element of the spacious residential development in Bulgarias Black Sea coast in Lozenec is the pearl-white ceramic faade combined with typical wood elements.

12

13

Tradition and the modern are elegantly combined in Dongen, Netherlands: the lightness of the volcanic grey shaded faade reects the colour shade of the old mill.

Architects chose faade tile-plates in natural red for an administrative building in Shanghai, China, thereby creating a harmonious and aesthetic bridge between modern and old architecture.

The combination of curved Barro elements and glass lend the business complex in Constance, Germany, a visually attractive transparency. The natural red colour successfully creates a link to the historical adjacent property.

Noble, pure and transparent the volcanic grey faade of the administrative building in Silkeborg, Denmark.

ArGeTon pRODUCT mATRIX

The selection of forms, formats and surfaces permits a design that will meet your personal requirements, permitting a tasteful combination with modern building materials such as steel or glass. Subtlety, elegance and timeless perfection permeate the range.

TAMPA

TERZO

LINEO

DANZA

ArGeLite

BARRO

CORNER

centre to centre distance Grid 150mm Grid 175mm Grid 187.5mm Grid 200mm Grid 212.5mm Grid 225mm Grid 237.5mm Grid 243.5mm Grid 250mm Grid 257mm Grid 275mm Grid 300mm Grid 400 mm Grid 500 mm

TAMPA

TERZO

TERZO 1

TERZO 2

TERZO 3

LINEO 4

LINEO 9

DANZA

D=24 mm

ArGeLite

50/50mm or 69/69mm, max. L=1,500mm

90/90mm or 120/120mm, max. L = 600mm

max. L = 600mm

max. L=600mm 150x50mm max. L=1,200mm

max. L = 600mm

max. L = 600mm

max. L = 1,200mm

max. L=1,200mm

100x50mm max. L=1,200mm

max. max. L = 1,200mm L =1,200mm

max. max. L=1,200mm L=800mm

max. L = 1,500mm

max. max. L=1,200mm L =1,200mm

max. max. L=1,200mm L=1,200mm

max. L = 1,500mm

max. L=1,500mm

max. max. L = 1,500mm L =1,500mm

max. L=1,500mm

max. L=800mm

max. L=1,500mm

max. L = 1,500mm

max. L = 1,500mm

max. L=800mm

max. L = 1,500mm

max. L = 1,500mm D = 35mm

General information
Tile thickness: 30 mm 1,5 mm Standard lengths: 400 1,500 mm Weight per m2: 42.0 44.0 kg The dimensions stated are centre-to-centre dimensions and refer to the centrejoint measurement both in terms of height and width.

Notes
In addition to standard lengths, variable lengths are possible. The product quality corresponds to at least EN 1304. Points of friction, e.g. through manufacture or transport are of no relevance to the standard values. Small colour deviations result from the production process. Please observe the important regulations and standards on the processing of ArGeTon panels.

ArGeTon COLOURS AND SURFACES

STANDARD COLOURS
The thirteen known colours stand for a natural and subtle colouration of the faade.

Apricot-beige

Salmon pastel

Salmon pastel

Natural red

Red brown

Glacier blue

Light grey

Platinum grey

Iron grey

Volcano grey

Pearlwhite

Sand

Sahara

ENGOBES/GLAZES
In addition to the standard colours, engobes, special engobes and glazes can also be realised. They primarily appeal to colour-conscious designers. Luminous colour glazes and metallic effects are also possible.

white glazed

yellow glazed

orange glazed

red glazed

green glazed

grey glazed

blue glazed

brown glazed

black glazed

SURFACES
All colours, engobes and glazes are available in different surface versions. Every faade is therefore unique with an individual appearance.

natural

brushed

textured

10

11

ArGeTon techNoLogy ALUmINIUm sUBsTRUCTURE, vERTICAL

ALUmINIUm T sUBsTRUCTURE WITH vERTICAL CARRIER RAILs
Cleats of aluminium are attached to the existing wall by means of approved pins in horizontal centre distance, and with the spacing necessary for structural stability. The occurrence of fixed and sliding points must be ensured here in compliance with DIN 18516, Part 1. Vertical aluminium carrier profiles are inserted into the cleats (a special clamping spring enables exact adjustment). After alignment of the carrier profile, it is attached with a blank rivet. The T profiles are pre-holed preferably to the tile-plate pattern. ArGeTon tile-plates are attached to the substructure with special clips at four points without being forced in, by means of self-tapping stainless-steel screws or aluminium hollow-drawn rivets. The procedure starts with the bottom row.

TOp CLIp

55 22

20

mIDDLE CLIp

63,5

22,5

20

BOTTOm CLIp

42,5 22,5

20

All information in mm.

ArGeTon techNoLogy ALUmINIUm sUBsTRUCTURE, HORIZONTAL

ALUmINIUm T sUBsTRUCTURE WITH HORIZONTAL CARRIER RAILs
The substructure consists of vertical angled base carrier profiles, which are anchored at the building with wall cleats. Horizontal carrier rails of aluminium are placed on the base substructure. The distance depends on the height in the grid of the ArGeTon tile-plates, which are fastened with special brackets to the horizontal carrier rails.

TOp CLIp

40

34

20

BOTTOm CLIp

48

31

20

mIDDLE CLIp

84,8

29,5

20

HORIzONTAL CARRIER RAIL

45

35

25 25

All information in mm.

12

13

ArGeTon techNoLogy JOINT AND CORNER PROFILES

ALUmINIUm jOINT pROfILE fOR ArGeTon TILE-pLATE
4 20 20 8 20

ALUmINIUm DRAINAGE ABUTmENT pROfILE

4

ALUmINIUm spRING pROfILE

56

59

15

30

50

ALUmINIUm CORNER pROfILE fOR ArGeTon TILE-pLATE

43 43 43 3

62

40

40

Notes
 The joint profiles of aluminium are available in 3 m length in the colours RAL 1015 light ivory, RAL 7005 mouse grey and RAL 8004 copper brown. Special colours available on request.  The aluminium corner profiles are untreated, anodised or coloured using RAL colours depending on requirements.

40

43

ArGeTon techNoLogy SUN SCREEN BARRO

cleat ArGeTon support

thermal separation

putting the support on the vertical prole (box section), including the distance piece,... The BARRO supports including the distance pieces should be pre-assembled on the vertical prole! ..., and xing with a counter-sunk screw ArGeTon BARRO with support prole and xing screw inserting the BARRO with the support prole and the fastened holding screw BARRO security clip tting the BARRO security clip variable 50 F insertion prole thermal seperation sheet, canted BARRO neoprene pad, 2 mm, elastic

BARRO supporting prole ArGeTon BARRO

horizontal carrier prol ArGeTon faade tile-plate

clamp abutment drainage prole

single support box section (spans oor to oor or across the window; dimensions according to the static calculation; with lower span widths also a at section may be possible)

14

15

ArGeTon

ArGeTon GmbH Oldenburger Allee 26 D-30659 Hannover Tel.: +49 (0) 511-610 70 820 Fax: +49 (0) 511-61 44 03 [email protected] www.argeton.com

www.i-de.de

06/10 20.0