Scribd
Upload
284 views4 pages

KTZ

This document provides information on Tsurumi submersible drainage pumps for professional use. It summarizes the key specifications, components, materials, dimensions, and accessories of the KTZ pump series for efficient drainage in construction applications. The pumps feature cast iron bodies, mechanical seals, ball bearings, and cooling jackets for continuous operation in water. Models range from 1.5 to 11 kW and are suitable for heads up to 48.5 meters and flows up to 2440 liters per minute.

Uploaded by

manbkk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
284 views4 pages

KTZ

This document provides information on Tsurumi submersible drainage pumps for professional use. It summarizes the key specifications, components, materials, dimensions, and accessories of the KTZ pump series for efficient drainage in construction applications. The pumps feature cast iron bodies, mechanical seals, ball bearings, and cooling jackets for continuous operation in water. Models range from 1.5 to 11 kW and are suitable for heads up to 48.5 meters and flows up to 2440 liters per minute.

Uploaded by

manbkk
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Tsurumi

KTZ

400V 50Hz

Medium-duty drainage pumps - for professional use Generally applicable highgrade pump that can be used efficiently in draining in civil engineering through to deepwell applications. Incorporating on the job requirements in the initial product design, Tsurumi has built a powerful new series of pumps to match the demands of tough drainage jobs.
2850 r.p.m.

2850 r.p.m.

Pumped water cools the motor and discharges as illustrated. The motor can be cooled even when pumping a small amount of water. The top discharge arrangement allows access into areas with space limitations. The pump can be run continuously in air.
In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our website www.tsurumi-europe.com/english/applications.htm.

Rugged
By offering a cast iron pump body, our durability is increased over standard aluminium body pumps. Within each motor size there is a choice between high head and high volume performance ranges.

Efficient motor cooling


Slim line design with a top discharge offers economy of space. There is efficient motor cooling through a side flow channel.

Increased water-pressure resistance


A newly developed mechanical seal endures water pressure of up to 5 kgf/cm2 (0,49MPa/cm2). This has made our KTZ submersible pumps usable at greater depth, such as in deep wells, to say nothing of use at general construction sites.

No. 1 6 20 21 22 23 25 26 30 32 35 36 50

Descriptions Cabtyre Cable Stuffing Box Pump Casing Impeller Suction Cover Strainer Stand Mechanical Seal Oil Seal Oil Ring Hose Coupling Oil Plug Lubricant Motor Bracket

No. 52A 52B 53 54 55 56 60 64 68

Descriptions Upper Bearing Lower Bearing Motor Protector Shaft Rotor Stator Bearing Housing Motor Frame Handle

In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our website www.tsurumi-europe.com/english/applications.htm.

2850 r.p.m.

2850 r.p.m.

Specifications:
Model Bore mm Motor output kW Rated current A Head max. m Capacity max. l/min Dry weight kg Max. Einsolid tauchhandling tiefe mm max. m

Standard Accessories: 1 Cable 20m 1 Threaded flange

KTZ21.5-51 KTZ31.5-51 KTZ22.2-51 KTZ32.2-51 KTZ23.7-52 KTZ33.7-52 KTZ43.7-52 KTZ35.5-51 KTZ45.5-51 KTZ47.5-51 KTZ67.5-51 KTZ411-51 KTZ611-51

50 80 50 80 50 80 100 80 100 100 150 100 150

1,5 1,5 2,2 2,2 3,7 3,7 3,7 5,5 5,5 7,5 7,5 11 11

3,5 3,5 5,0 5,0 7,7 7,7 7,7 11,4 11,4 15,0 15,0 22,0 22,0

21,5 14,4 26,0 20,4 36,5 29,0 18,0 32,0 22,5 40,0 31,0 48,5 32,5

430 670 500 800 450 900 1440 1100 1750 1400 2040 1440 2440

30 30 34 34 62,5 62,5 62,5 82 82 105 107 133 136

8,5 8,5 8,5 8,5 8,5 8,5 8,5 10 10 12 20 12 20

50 50 50 50 50 50 50 50 50 50 50 50 50

Dry weight of the pump without cable

Discharge bore mm Pumping Fluid Type of Fluid Liquid Temperature Components Pump Impeller Shaft Seal Bearing Impeller Casing Material Suction Cover Shaft Seal
(mechanical Seal)

50 80 100 150

KTZ

Spring water,Rain water, Ground water, Sand carrying water 0 - 40C Open type Double mechanical seal Shielded ball bearings Chromium iron casting Grey iron casting Ductile iron casting Silicon carbide in oil bath Dry-type submersible induction motor, 2 poles Insulation class F 3-phase / 400V / direct on line Circle thermal cut-out Turbine oil (ISO VG32) Grey iron casting Stainless steel EN-X30Cr13 Rubber, H07RN-F Threaded flange

Type, Poles Insulation Phase / Voltage Motor Protector (built-in) Lubricant Frame Shaft Material Cable Discharge Connection

Motor

Cast Iron Chromium Cast Iron HiCrFC GG15 / EN-GJL-150 GG20 / EN-GJL-200 GGG50 / EN-GJS-500-7

Brinell hardness 415 - 425 125 - 205 150 - 230 150 - 220

In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our website www.tsurumi-europe.com/english/applications.htm.

1,5kW - 5,5kW

7,5kW - 11kW

CWL

CWL

CWL: continuous running water level

Dimensions:
Model A

in mm A1 B B1 D H W1

KTZ21.5-51 KTZ31.5-51 KTZ22.2-51 KTZ32.2-51 KTZ23.7-52 KTZ33.7-52 KTZ43.7-52 KTZ35.5-51 KTZ45.5-51 KTZ47.5-51 KTZ67.5-51 KTZ411-51 KTZ611-51

235 235 235 235 283 283 283 306 306 330 330 373 373

173 173 173 173 208 208 208 218 218 240 240 260 260

509 509 529 529 627 627 642 671 686 764 799 806 826

401 401 421 421 504 504 504 548 548 626 626 645 645

216 216 216 216 252 252 252 259 259 314 314 350 350

478 478 498 498 637 637 637 688 688 687 687 740 740

120 120 120 120 150 150 150 150 150 190 190 190 190

We reserve the right to change specifications and designs herein for improvement without prior notice. Our pumps are for professional use only. In the event that Tsurumi (Europe) GmbH have, in exceptional cases taken over, a manufacturers warranty, this entitles the end-user to assert remedy free of charge against Tsurumi (Europe) GmbH due to any defect to the product occurring during the guarantee period (see below), also then when the warranty claims against the seller do not or no longer exist. In the event of malfunction, which is attributable to the improper handling by the enduser, no guarantee claim shall arise. Further claims shall not result from the warranty, unless if something to the contrary has explicitly been determined. The decision as to whether remedy is effected by way of replacement or repair shall be at the choice of Tsurumi (Europe) GmbH. The claims shall be time barred after a period of three months after expiry of the guarantee period, however, not before expiry of the warranty period which is valid towards the seller. In the event of doubt, the warranty period shall correspond with the warranty period which is valid between the end-user and his seller.
Cat.-no. KTZ-E-06/08

Tsurumi (Europe) GmbH


Heltorfer Strae 14 D-40472 Dsseldorf Tel.: +49-211-4179373 Fax: +49-211-4791429 Email: [email protected] www.tsurumi-europe.com

Your Dealer

You might also like