Conky Config
Conky Config
Conky Config
org/color-index,a ================================================================================ =========================================== # set to yes if you want Conky to be forked in the background background no cpu_avg_samples 2 net_avg_samples 2 out_to_console no # # # # # # # # # X font when Xft is disabled, you can pick one with program xfontsel font 7x12 font 6x10 font 7x13 font 8x13 font 7x12 font *mintsmild.se* font -*-*-*-*-*-*-34-*-*-*-*-*-*-* font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft? use_xft yes # Xft font when Xft is enabled xftfont Bitstream Vera Sans Mono:size=8 own_window_transparent no own_window_colour hotpink # Text alpha when using Xft xftalpha 0.8 # on_bottom yes # mail spool mail_spool $MAIL # Update interval in seconds update_interval 1 # Create own window instead of using desktop (required in nautilus) own_window no # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # Minimum size of text area # minimum_size 280 5 # maximum_width 150 # Draw shades? draw_shades no
# Draw outlines? draw_outline no # Draw borders around text draw_borders no # Stippled borders? stippled_borders 10 # border margins border_margin 4 # border width border_width 1 # Default colors and also border colors default_color white default_shade_color white default_outline_color white # Text alignment, other possible values are commented # alignment top_left # minimum_size 10 10 gap_x 5 gap_y 5 alignment top_right # alignment bottom_left # alignment bottom_right # Gap between borders of screen and text # Add spaces to keep things from moving about? This only affects certain object s. use_spacer left # Subtract file system buffers from used memory? no_buffers yes # set to yes if you want all text to be in uppercase uppercase no # boinc (seti) dir # seti_dir /opt/seti TEXT $nodename - $sysname $kernel on $machine $stippled_hr ${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg ${color lightgrey}CPU Usage:${color #22ccff} ${cpu}% ${cpubar} ${color black}${cpugraph 000000 22ccff} ${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% $membar ${color lightgrey}Processes:$color $processes ${color grey}Running:$color $runn ing_processes $color$stippled_hr ${color lightgrey}Networking: Down:${color #8844ee} ${downspeed eth0} k/s${color lightgrey} ${offset 70}Up:${ color #22ccff} ${upspeed eth0} k/s ${color black}${downspeedgraph eth0 32,150 ff0000 0000ff} $alignr${color black}$ {upspeedgraph eth0 32,150 0000ff ff0000}
${color lightgrey}File systems: / $color${fs_free /}/${fs_size /} ${fs_bar /} C $color${fs_free /mnt/windows}/${fs_size /mnt/windows} ${fs_bar /mnt/windows} C2 $color${fs_free /mnt/driveC2}/${fs_size /mnt/driveC2} ${fs_bar /mnt/driveC2} D $color${fs_free /mnt/driveD}/${fs_size /mnt/driveD} ${fs_bar /mnt/driveD} E $color${fs_free /mnt/driveE}/${fs_size /mnt/driveE} ${fs_bar /mnt/driveE} E2 $color${fs_free /mnt/driveE2}/${fs_size /mnt/driveE2} ${fs_bar /mnt/driveE2} F $color${fs_free /mnt/driveF}/${fs_size /mnt/driveF} ${fs_bar /mnt/driveF} F2 $color${fs_free /mnt/driveF2}/${fs_size /mnt/driveF2} ${fs_bar /mnt/driveF2} G $color${fs_free /mnt/driveG}/${fs_size /mnt/driveG} ${fs_bar /mnt/driveG} ${color}Name PID CPU% MEM% ${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1} ${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2} ${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3} ${color}Mem usage ${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem m em 1} ${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2} ${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3} ================================================================================ =========================================== background yes use_xft yes xftfont HandelGotD:size=8 xftalpha 0.1 update_interval 0.5 total_run_times 0 own_window yes own_window_type normal own_window_transparent no own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager double_buffer yes minimum_size 200 5 maximum_width 200 draw_shades no draw_outline no draw_borders no draw_graph_borders no default_color white default_shade_color red default_outline_color green alignment top_right gap_x 18 gap_y 48 no_buffers yes uppercase no cpu_avg_samples 2 net_avg_samples 1 override_utf8_locale no use_spacer yes TEXT ${color green}$kernel $alignr $machine Uptime $uptime Load $loadavg ${time %a %d %b %k:%M} Intel Core 2 Duo $alignr${freq_g cpu0}Ghz
$alignr ${cpugraph cpu0 16,200} CPU:1 ${cpu cpu1}% ${cpubar cpu1} CPU:2 ${cpu cpu2}% ${cpubar cpu2} MEM $alignc $mem / $memmax $alignr $memperc% $membar Disk i/o ${diskiograph 16,200} Processes $alignr $running_processes Running $alignr $processes Sleeping Top Processes CPU $alignr CPU% MEM% ${top name 1}$alignr${top cpu 1}${top mem 1} ${top name 2}$alignr${top cpu 2}${top mem 2} # ${top name 3}$alignr${top cpu 2}${top mem 3} MEM $alignr CPU% MEM% ${top_mem name 1}$alignr${top_mem cpu 1}${top_mem mem 1} ${top_mem name 2}$alignr${top_mem cpu 2}${top_mem mem 2} # ${top_mem name 3}$alignr${top_mem cpu 3}${top_mem mem 3} ================================================================================ =========================================== Errors===== background yes use_xft yes xftfont HandelGotD:size=8 xftalpha 0.1 update_interval 0.5 total_run_times 0 own_window yes own_window_type normal own_window_transparent no own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager double_buffer yes minimum_size 200 5 maximum_width 200 draw_shades no draw_outline no draw_borders no draw_graph_borders no default_color white default_shade_color red default_outline_color green alignment top_right gap_x 18 gap_y 48 no_buffers yes uppercase no cpu_avg_samples 2 net_avg_samples 1 override_utf8_locale no use_spacer yes TEXT
${font bold:size=26}${color ffffff}${shadecolor 202020}${time %I:%M %p}$shadecolor$color$font ${font bold:size=8}${color ffffff}${shadecolor 202020}${time %A %B, %d %Y}$shadecolor$color$font ${color B28F59}$hr${color} ${font size=8}${color ffffff}${shadecolor 202020}$nodename$shadecolor$color$font $sysname $kernel on $machine$font ${color B28F59}$hr${color} ${voffset -2}${color B28F59}${shadecolor 202020}STATUS :$shadecolor$color ${color B28F59}${voffset -6}$hr${color} Uptime: $uptime - Load: $loadavg Processes: Running: $processes Active: $running_processes Processes Detail: ${alignr}${offset -4}PID ${offset 4}CPU% MEM% ${color #B26B59}${offset 17}${top name 1}${alignr}${offset -3}${top pid 1} ${top cpu 1} ${top mem 1}$color ${offset 17}${top name 2}${alignr}${top pid 2} ${top cpu 2} ${top mem 2} ${offset 17}${top name 3}${alignr}${top pid 3} ${top cpu 3} ${top mem 3} ${offset 17}${top name 4}${alignr}${top pid 4} ${top cpu 4} ${top mem 4} ${offset 17}${top name 5}${alignr}${top pid 5} ${top cpu 5} ${top mem 5} ${color B28F59}$hr${color} ${voffset -2}${color B28F59}${shadecolor 202020}PROCESSOR :$shadecolor$color ${color B28F59}${voffset -6}$hr${color} ${cpugraph cpu0 60,299 04578a 597DB2} ${voffset -68}Intel Core 2 Duo @5300 Core 1: ${freq 1} MHz ${cpu cpu1}% ${color 597DB2}${cpubar cpu1}$color Core 2: ${freq 2} MHz ${cpu cpu2}% ${color 597DB2}${cpubar cpu2}$color ${voffset -12}${color B28F59}$hr${color} ${voffset -2}${color B28F59}${shadecolor 202020}MEMORY :$shadecolor$color ${color B28F59}${voffset -6}$hr${color} Corsair Value Select: $mem / $memmax $memperc% ${color 597DB2}${membar}$color ${color B28F59}$hr${color} ${voffset -2}${color B28F59}${shadecolor 202020}STORAGE :$shadecolor$color ${color B28F59}${voffset -6}$hr${color} File systems: System: ${fs_used /} / ${fs_size /} ${color 597DB2}${fs_bar /}${color} ${color B28F59}$hr${color} ${voffset -2}${color B28F59}${shadecolor 202020}NETWORK :$shadecolor$color ${color B28F59}${voffset -6}$hr$color ${voffset -5}${downspeedgraph wlan0 64,149 495831 91B359}${upspeedgraph wlan0 64 ,149 5C232D B05B6A} ${voffset -67}Wireless: Public IP: ${offset 15}${execi 3600 curl 'http://www.whatismyip.org'} Local IP: ${offset 20}${addr wlan0} Down: ${offset 20}${downspeed wlan0} Kb/s${offset 80}Up: ${upspeed wlan0}$color Kb/s ================================================================================
=========================================== #avoid flicker double_buffer yes #own window to run simultanious 2 or more conkys own_window yes own_window_transparent no own_window_type normal own_window_hints undecorate,sticky,skip_taskbar,skip_pager #borders draw_borders no border_margin 3 #shades draw_shades no #position gap_x 0 gap_y 4 alignment top_left #behaviour update_interval 1 #colour default_color 8f8f8f #default_shade_color 000000 own_window_colour 262729 #font use_xft yes xftfont sans:size=7 # Force UTF8? note that UTF8 support required XFT override_utf8_locale yes #to prevent window from moving use_spacer none minimum_size 1024 0 #mpd #mpd_host localhost #mpd_port 6600 TEXT ${alignc}Date: ${color e0e0e0}${time %d/%m/%y}${color} Time: ${color e0e0e0}${t ime %H:%M}${color} | Kernel: ${color e0e0e0}$kernel${color} Uptime: ${color e 0e0e0}${uptime_short}${color} | Cpu: ${color e0e0e0}${cpu}%${color} Ram: ${co lor e0e0e0}${memperc}%${color} Swap: ${color e0e0e0}${swapperc}%${color} Disk: ${color e0e0e0}${fs_used_perc /}%${color} | Motherboard: ${color e0e0e0}${acp itemp}C${color} Cpu: ${color e0e0e0}${acpitemp}C${color} Disk: ${color e0e0e0}${ac pitemp}C${color} | ${if_existing /proc/net/route eth1}Signal: ${color e0e0e0}${w ireless_link_qual eth1}%${color} Up: ${color e0e0e0}${upspeed eth1} kb/s${color } Down: ${color e0e0e0}${downspeed eth1} kb/s${color}${else}${if_existing /proc /net/route eth1}Up: ${color e0e0e0}${upspeed eth1} kb/s${color} Down: ${color e 0e0e0}${downspeed eth1} kb/s${color}${endif}${else}Network Unavailable${endif}${ alignc} ================================================================================ ===============================================================
# Create own window instead of using desktop (required in nautilus) own_window yes #own_window_type override own_window_transparent no own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager shadecolor #333333 # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades yes # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color darkgrey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 10 # stuff after 'TEXT' will be formatted on screen
TEXT $color ${color #6666CC}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color #6666CC}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME PID CPU% MEM% ${top name 1} ${top pid 1} ${top cpu 1} ${top ${top name 2} ${top pid 2} ${top cpu 2} ${top ${top name 3} ${top pid 3} ${top cpu 3} ${top ${top name 4} ${top pid 4} ${top cpu 4} ${top ${top name 5} ${top pid 5} ${top cpu 5} ${top ${color #6666CC}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Root: ${fs_free_perc /}% ${fs_bar 6 /}$color hda1: ${fs_free_perc /media/sda1}% ${fs_bar 6 /media/sda1}$color ${color #6666CC}NETWORK (${addr wlan0}) ${hr 2}$color Signal: $color${wireless_link_qual wlan0} / $color${wireless_link_qual_max wlan0 } Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | u niq -c | sort -nr} ${color #6666CC}LOGGING ${hr 2}$color ${execi 30 tail -n3 /var/log/messages | awk '{print " ",$5,$6,$7,$8,$9,$10}' | f old -w50} ${color #6666CC}FORTUNE ${hr 2}$color ${execi 120 fortune -s | fold -w50} ================================================================================ =============================================================== #avoid flicker double_buffer yes #own window to run simultanious 2 or more conkys own_window yes own_window_transparent yes own_window_type override own_window_hints undecorate,sticky,skip_taskbar,skip_pager #borders draw_borders no border_margin 1 #shades draw_shades no #position gap_x 0 gap_y 1
1} 2} 3} 4} 5}
alignment bottom_left #behaviour update_interval 5 #colour #default_color 8f8f8f default_color e0e0e0 #default_shade_color 000000 own_window_colour 262729 #font use_xft yes xftfont sans:size=9 # Force UTF8? note that UTF8 support required XFT override_utf8_locale yes #to prevent window from moving use_spacer none minimum_size 1200 0 TEXT ${alignc}${color}Kernel:${color e0e0e0}$kernel${color 000000} | ${color}Uptime:$ {color e0e0e0}${uptime_short}${color 000000} | ${color}Cpu1:${color e0e0e0}${cpu cpu1}%${color 000000} | ${color}Cpu2:${color e0e0e0}${cpu cpu2}%${color 000000} | ${color}Ram:${color e0e0e0}${memperc}%${color}${color 000000} | ${color}Swap: ${color e0e0e0}${swapperc}%${color}${color 000000} | ${color}Root:${color e0e0e0 }${fs_used_perc /}%${color 000000} | ${color}Home:${color e0e0e0}${fs_used_perc /home}%${if_existing /proc/net/route wlan0}${color 000000} | ${color}Signal:${co lor e0e0e0}${wireless_link_qual wlan0}%${color 000000} | ${color}Up:${color e0e0 e0}${upspeed wlan0}kb/s${color}/Down:${color e0e0e0}${downspeed wlan0}kb/s${colo r}${else}${if_existing /proc/net/route eth0}${color 000000} | ${color}eth0:${col or e0e0e0}${downspeed eth0}/${upspeed eth0} kb/s${color}${endif}${else}Network U navailable${endif}${color 000000} | ${color}DiskIO:${diskio}${alignc} ================================================================================ =============================================================== background no #font 7x13 use_xft yes xftalpha 0.8 update_interval 1.0 total_run_times 0 own_window yes own_window_transparent yes own_window_type override own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager double_buffer yes minimum_size 280 5 draw_shades yes draw_outline no draw_borders no draw_graph_borders yes stippled_borders 8
border_margin 4 border_width 1 default_color ffffff default_shade_color black default_outline_color black alignment middle_right maximum_width 308 gap_x 12 gap_y 12 no_buffers yes uppercase no cpu_avg_samples 2 net_avg_samples 2 override_utf8_locale no use_spacer none #use_spacer right text_buffer_size 2048 # stuff after 'TEXT' will be formatted on screen TEXT Gentoo ${alignc}$kernel${alignr}${time %T %d/%m/%Y}
System: ${hr 1} Uptime: $uptime ${alignr}Load: $loadavg CPU Frequency: ${freq_g} GHz CPU0: ${cpu cpu0}% ${cpubar cpu0} CPU1: ${cpu cpu1}% ${cpubar cpu1} ${cpugraph cpu0 32,150 000000 7f8ed3} ${cpugraph cpu1 32,150 000000 7f8ed3} RAM Usage: $mem/$memmax - $memperc% ${membar} Swap Usage: $swap/$swapmax - $swapperc% ${swapbar} Sensors: mp}C CPU ${acpitemp}C GPU ${execi 60 nvidia-settings -t -q GPUCoreTe
Processes: $processes Running: $running_processes Name PID CPU% MEM% ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3} Mem usage ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3} File Systems: ${hr 1} / ${fs_used /}/${fs_size /} ${fs_bar /} data ${fs_used /mnt/data}/${fs_size /mnt/data} ${fs_bar /mnt/data} w2 ${fs_used /mnt/web2}/${fs_size /mnt/web2} ${fs_bar /mnt/web2}
Networking: ${hr 1} Down: ${downspeedf eth0} KiB ${offset 80}Up: ${upspeedf eth0} KiB ${downspeedgraph eth0 32,150 000000 7f8ed3} ${upspeedgraph eth0 32,150 000000 7f 8ed3} Down: ${totaldown eth0} ${offset 80}Up: ${totalup eth0} Address: ${addr eth0}${alignr}GW: ${gw_iface} Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768 61000 coun t}${alignr}ALL: ${tcp_portmon 1 65535 count} Weather: ${hr 1}${execi 600 /home/lisa/Downloads/conky_weather/weather_script.sh fetch} Now: ${execi 600 /home/lisa/Downloads/conky_weather/weather_script.sh now} Tomorrow: ${execi 600 /home/lisa/Downloads/conky_weather/weather_script.sh tmoro} ================================================================================ =============================================================== background no #font 7x13 use_xft yes xftfont Bitstream Vera Sans Mono:size=8 xftalpha 0.8 update_interval 1.0 total_run_times 0 own_window yes own_window_transparent yes own_window_type override own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager double_buffer yes minimum_size 280 5 draw_shades yes draw_outline no draw_borders no draw_graph_borders yes stippled_borders 8 border_margin 4 border_width 1 default_color 7f8ed3 default_shade_color black default_outline_color black alignment top_right maximum_width 308 gap_x 12 gap_y 12 no_buffers yes uppercase no
cpu_avg_samples 2 net_avg_samples 2 override_utf8_locale no use_spacer none #use_spacer right text_buffer_size 2048 # stuff after 'TEXT' will be formatted on screen TEXT ${color #5b6dad}Gentoo ${alignc}$kernel${alignr}${time %T}
${color #5b6dad}System: ${hr 1} ${color #5b6dad} Uptime:${color #7f8ed3} $uptime ${color #5b6dad} ${alignr}Load: ${color #7f8ed3} $loadavg ${color #5b6dad} CPU Frequency:${color #7f8ed3} ${freq_g} GHz ${color #5b6dad} CPU Usage:${color #7f8ed3} $cpu% ${cpubar} ${color #7f8ed3}${cpugraph cpu0 32,309 7f8ed3 7f8ed3} ${color #5b6dad} RAM Usage:${color #7f8ed3} $mem/$memmax - $memperc% ${membar} #${color #5b6dad} Swap Usage:${color #7f8ed3} $swap/$swapmax - $swapperc% ${swap bar} ${color #5b6dad} Power: Status ${color #7f8ed3} ${battery BAT1} ${color #7f8ed3} ${battery_bar BAT1} ${color ${color ${color ${color ${color ${color ${color ${color mem 1} ${color mem 2} ${color mem 3} #5b6dad} #7f8ed3} #5b6dad} #7f8ed3} #7f8ed3} #7f8ed3} #5b6dad} #7f8ed3} Time ${battery_time BAT1}
Processes:${color #7f8ed3} $processes ${color #5b6dad}Running: $running_processes Name PID CPU% MEM% ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3} Mem usage ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem
#7f8ed3} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem #7f8ed3} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem
${color #5b6dad}File Systems: ${hr 1} ${color #5b6dad}/ ${color #7f8ed3}${fs_used /}/${fs_size /} ${color #7f8ed3}${f s_bar /} ${color #5b6dad}D ${color #7f8ed3}${fs_used /mnt/disk0}/${fs_size /mnt/disk0} $ {color #7f8ed3}${fs_bar /mnt/disk0} ${color #5b6dad}Networking: ${hr 1} ${color #5b6dad}Down:${color #7f8ed3} ${if_up ppp0}${downspeedf ppp0}${else}${i f_up wlan0}${downspeedf wlan0}${else}${if_up eth0}${downspeedf eth0}${endif}${en dif}${endif} KiB ${color #5b6dad}${offset 80}Up:${color #7f8ed3} ${if_up ppp0}${ upspeedf ppp0}${else}${if_up wlan0}${upspeedf wlan0}${else}${if_up eth0}${upspee df eth0}${endif}${endif}${endif} KiB ${if_up ppp0}${downspeedgraph ppp0 32,150 7f8ed3 7f8ed3}${else}${if_up wlan0}${d ownspeedgraph wlan0 32,150 7f8ed3 7f8ed3}${else}${if_up eth0}${downspeedgraph et h0 32,150 7f8ed3 7f8ed3}${endif}${endif}${endif} ${if_up ppp0}${upspeedgraph ppp
0 32,150 7f8ed3 7f8ed3}${else}${if_up wlan0}${upspeedgraph wlan0 32,150 7f8ed3 7 f8ed3}${else}${if_up eth0}${upspeedgraph eth0 32,150 7f8ed3 7f8ed3}${endif}${end if}${endif} ${color #5b6dad}Down: ${color #7f8ed3}${if_up ppp0}${totaldown ppp0}${else}${if _up wlan0}${totaldown wlan0}${else}${if_up eth0}${totaldown eth0}${endif}${endif }${endif} ${color #5b6dad}${offset 80}Up: ${color #7f8ed3}${if_up ppp0}${totalup ppp0}${else}${if_up wlan0}${totalup wlan0}${else}${if_up eth0}${totalup eth0}${ endif}${endif}${endif} ${color #5b6dad}Address: ${if_up ppp0}${addr ppp0}${else}${color #7f8ed3}${if_u p wlan0}${addr wlan0}${else}${if_up eth0}${addr eth0}${endif}${endif}${endif}${a lignr}${color #5b6dad}GW: ${color #7f8ed3}${gw_iface} ${color #5b6dad}Inbound: ${color #7f8ed3}${tcp_portmon 1 32767 count} ${color #5b6dad}Outbound: ${color #7f8ed3}${tcp_portmon 32768 61000 count}${alignr}${col or #5b6dad}ALL: ${color #7f8ed3}${tcp_portmon 1 65535 count} ================================================================================ =============================================================== # set to yes if you want Conky to be forked in the background background yes cpu_avg_samples 2 net_avg_samples 2 out_to_console no # X font when Xft is disabled, you can pick one with program xfontsel #font 7x12 #font 6x10 #font 7x13 font 8x12 #font 7x12 #font *mintsmild.se* #font -*-*-*-*-*-*-34-*-*-*-*-*-*-* #font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1 # Use Xft? use_xft yes # Xft font when Xft is enabled xftfont DejaVu Sans:size=10 own_window_transparent no own_window_colour black # Text alpha when using Xft xftalpha 0.8 #on_bottom no # mail spool mail_spool $MAIL # Update interval in seconds update_interval 1 # Create own window instead of using desktop (required in nautilus) own_window no # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes
# Minimum size of text area minimum_size 200 5 maximum_width 200 # Draw shades? draw_shades yes # Draw outlines? draw_outline no # Draw borders around text draw_borders no # Stippled borders? stippled_borders 0 # border margins border_margin 15 # border width border_width 1 # Default colors and also border colors default_color 000000 default_shade_color black default_outline_color green # Text alignment, other possible values are commented #alignment top_left alignment middle_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 30 gap_y 15 # Add spaces to keep things from moving about? This only affects certain object s. use_spacer right # Subtract file system buffers from used memory? no_buffers yes # set to yes if you want all text to be in uppercase uppercase no # boinc (seti) dir # seti_dir /opt/seti # # # # # # # # # Possible variables to be used: Variable acpiacadapter acpifan acpitemp adt746xcpu adt746xfan battery Arguments Description ACPI ac adapter state. ACPI fan state ACPI temperature. CPU temperature from therm_adt746x Fan speed from therm_adt746x Remaining capasity in ACPI or APM
(num)
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
battery. ACPI battery number can be given as argument (default is BAT0). buffers Amount of memory buffered cached Amount of memory cached color (color) Change drawing color to color cpu CPU usage in percents cpubar (height) Bar that shows CPU usage, height is bar's height in pixels downspeed net Download speed in kilobytes downspeedf net Download speed in kilobytes with one decimal exec shell command Executes a shell command and displays the output in torsmo. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch :-). execi interval, shell Same as exec but with specific interval. command Interval can't be less than update_interval in configuration. fs_bar (height), (fs) Bar that shows how much space is used on a file system. height is the height in pixels. fs is any file on that file system. fs_free (fs) Free space on a file system available for users. fs_free_perc (fs) Free percentage of space on a file system available for users. fs_size (fs) File system size fs_used (fs) File system used space hr (height) Horizontal line, height is the height in pixels i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev may be omitted if you have only one I2C device. type is either in (or vol) meaning voltage, fan meaning fan or temp meaning temperature. n is number of the sensor. See /sys/bus/i2c/devices/ on your local computer. kernel Kernel version loadavg (1), (2), (3) System load average, 1 is for past 1 minute, 2 for past 5 minutes and 3 for past 15 minutes. machine Machine, i686 for example mails Mail count in mail spool. You can use program like fetchmail to get mails from some server using your favourite protocol. See also new_mails. mem Amount of memory in use membar (height) Bar that shows amount of memory in use memmax Total amount of memory memperc Percentage of memory in use new_mails Unread mail count in mail spool. nodename Hostname outlinecolor (color) Change outline color pre_exec shell command Executes a shell command one time before torsmo displays anything and puts output as text. processes Total processes (sleeping and running) running_processes Running processes (not sleeping), requires Linux 2.6
# # # # # # # # # # # # # # # # # # # # # # # # # #
Change shading color Stippled (dashed) horizontal line Bar that shows amount of swap in use Amount of swap in use Total amount of swap Percentage of swap in use System name, Linux for example Local time, see man strftime to get more information about format Total download, overflows at 4 GB on Linux with 32-bit arch and there doesn't seem to be a way to know how many times it has already done that before torsmo has started. Total upload, this one too, may overflow Number of updates (for debugging) Upload speed in kilobytes Upload speed in kilobytes with one decimal Uptime Uptime in a shorter format Seti@home current progress Seti@home current progress bar Seti@hoome total user credit
(format) net
(height)
## antiX additives examples. Add below Text## ##${color cccccc}battery: ${color cccccc}$acpiacadapter, ${battery_percent BAT1} % ##${color white}battery:${color white} ${battery} ##Witeless example## #${color cccccc}Wireless: #${color cccccc}essid: ${wireless_essid wlan0} #${color cccccc}IP:${color cccccc} ${addr wlan0} #${color cccccc}speed: ${color cccccc} ${wireless_bitrate wlan0} #${color cccccc}link strength: ${color cccccc} ${wireless_link_bar 7,50 wlan0} # stuff after 'TEXT' will be formatted on screen TEXT ${shadecolor a53d10}${font Swift:size=20}${color e6be6b}BIKER$font ${color e6be6b}${hr 2}$shadecolor ${font DejaVu Sans:size=14}${color ddd652}AntiX-M 8.5$font ${font DejaVu Sans:size=8}Mark Edelman July 24, 2009$font ${color fdb341}$sysname $kernel ${color fdb341}Uptime: ${color green}$uptime ${color 000000}${hr 2} ${color red}CPU ${color ffffff}Usage: ${color red}$cpu% ${shadecolor 6B0000}${color black}${cpugraph 30,200 0000f4 f10a0a}$shadecolor ${color ffffff}Frequency: ${color gold}$freq ${color gold}MHz ${color 7091c1}RAM ${color ffffff}Usage: ${color 7091c1}$memperc% ${shadecolor 6B0000}${color black}${memgraph 30,200 f10a0a 7091c1}$shadecolor ${color 7091c1}$mem${color ffffff}/${color ffffff}$memmax ${color 7091c1}$buffers ${color 54f729} Buffered ${color 7091c1}$cached ${color d58e2b} Cached ${color orange}Swap ${color ffffff}Usage: ${color orange}$swap${color ffffff}/${color ffffff}$swapmax ${color ffffff}- ${c
olor ffffff}$swapperc% ${color orange}$swapbar ${color ffffff}Free Space: ${color b555b2}/root:${color b555b2} ${fs_free /} ${color ffffff}= ${fs_free_per c /}% ${color b555b2}$fs_bar_free /home ${color 4ab1ab}/home:${color 4ab1ab} ${fs_free /home} ${color ffffff}= ${fs_free _perc /home}% ${color 4ab1ab}${fs_bar_free /home} ${color ffffff}Networking: Up:${color 14f3ff}${upspeed wlan0} ${color ffffff} - Down:${color green}${downsp eed wlan0} ${font DejaVuSansMono:size=8}${color ffffff}Running processes: ${color ffffff}$r unning_processes$font ${font DejaVuSansMono:size=8}${color ffffff}Name ${color red}CPU% ${color 7091c1}MEM%$font ${font DejaVuSansMono:size=8}${color ffffff} ${top name 1} ${color red}${top cpu 1} ${color 7091c1}${top mem 1}$font ${font DejaVuSansMono:size=8}${color ffffff} ${top name 2} ${color red}${to p cpu 2} ${color 7091c1}${top mem 2}$font ${font DejaVuSansMono:size=8}${color ffffff} ${top name 3} ${color red}${to p cpu 3} ${color 7091c1}${top mem 3}$font ${color ffffff}link strength: ${color ffffff} ${wireless_link_bar 7,50 wlan0} ${color ffffff}${time %a %d %b %l:%M:%S%p} ${font Penguin Attack}${color b5550b}Conky ${color b5550b}$conky_version$font ================================================================================ =============================================================== # set to yes if you want Conky to be forked in the background background yes cpu_avg_samples 2 net_avg_samples 2 out_to_console no # X font when Xft is disabled, you can pick one with program xfontsel #font 7x12 #font 6x10 #font 7x13 font 8x12 #font 7x12 #font *mintsmild.se* #font -*-*-*-*-*-*-34-*-*-*-*-*-*-* #font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1 # Use Xft? use_xft yes # Xft font when Xft is enabled xftfont gentium:size=10 own_window_transparent yes own_window_colour tan own_window_type desktop # Create own window instead of using desktop (required in nautilus, pcmanfm and rox desktops) own_window no
# Text alpha when using Xft xftalpha 0.8 #on_bottom no # mail spool mail_spool $MAIL # Update interval in seconds update_interval 1 # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # Minimum size of text area minimum_size 5 5 maximum_width 200 # Draw shades? draw_shades no # Draw outlines? draw_outline no # Draw borders around text draw_borders no # Stippled borders? stippled_borders 0 # border margins border_margin 10 # border width border_width 2 # Default colors and also border colors default_color white default_shade_color white default_outline_color white # Text alignment, other possible values are commented alignment top_left #alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 10 # Add spaces to keep things from moving about? This only affects certain object s. use_spacer right # Subtract file system buffers from used memory? no_buffers yes
# set to yes if you want all text to be in uppercase uppercase no # boinc (seti) dir # seti_dir /opt/seti # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # Possible variables to be used: Variable acpiacadapter acpifan acpitemp adt746xcpu adt746xfan battery buffers cached color cpu cpubar downspeed downspeedf exec Description ACPI ac adapter state. ACPI fan state ACPI temperature. CPU temperature from therm_adt746x Fan speed from therm_adt746x (num) Remaining capasity in ACPI or APM battery. ACPI battery number can be given as argument (default is BAT0). Amount of memory buffered Amount of memory cached (color) Change drawing color to color CPU usage in percents (height) Bar that shows CPU usage, height is bar's height in pixels net Download speed in kilobytes net Download speed in kilobytes with one decimal shell command Executes a shell command and displays the output in torsmo. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch :-). interval, shell Same as exec but with specific interval. command Interval can't be less than update_interval in configuration. (height), (fs) Bar that shows how much space is used on a file system. height is the height in pixels. fs is any file on that file system. (fs) Free space on a file system available for users. (fs) Free percentage of space on a file system available for users. (fs) File system size (fs) File system used space (height) Horizontal line, height is the height in pixels (dev), type, n I2C sensor from sysfs (Linux 2.6). dev may be omitted if you have only one I2C device. type is either in (or vol) meaning voltage, fan meaning fan or temp meaning temperature. n is number of the sensor. See /sys/bus/i2c/devices/ on your local computer. Kernel version (1), (2), (3) System load average, 1 is for past 1 minute, 2 for past 5 minutes and 3 for past 15 minutes. Machine, i686 for example Mail count in mail spool. You can use program like fetchmail to get mails from Arguments
execi fs_bar
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
mem membar memmax memperc new_mails nodename outlinecolor pre_exec processes running_processes shadecolor stippled_hr swapbar swap swapmax swapperc sysname time totaldown
(height)
some server using your favourite protocol. See also new_mails. Amount of memory in use Bar that shows amount of memory in use Total amount of memory Percentage of memory in use Unread mail count in mail spool. Hostname Change outline color Executes a shell command one time before torsmo displays anything and puts output as text. Total processes (sleeping and running) Running processes (not sleeping), requires Linux 2.6 Change shading color Stippled (dashed) horizontal line Bar that shows amount of swap in use Amount of swap in use Total amount of swap Percentage of swap in use System name, Linux for example Local time, see man strftime to get more information about format Total download, overflows at 4 GB on Linux with 32-bit arch and there doesn't seem to be a way to know how many times it has already done that before torsmo has started. Total upload, this one too, may overflow Number of updates (for debugging) Upload speed in kilobytes Upload speed in kilobytes with one decimal Uptime Uptime in a shorter format Seti@home current progress Seti@home current progress bar Seti@hoome total user credit
(format) net
(height)
## antiX additives examples. Add below Text## ##${color cccccc}battery: ${color cccccc}$acpiacadapter, ${battery_percent BAT1} % ##${color}battery:${color} ${battery} ##Witeless example## #${color cccccc}Wireless: #${color cccccc}essid: ${wireless_essid wlan0} #${color cccccc}IP:${color cccccc} ${addr wlan0} #${color cccccc}speed: ${color cccccc} ${wireless_bitrate wlan0} #${color cccccc}link strength: ${color cccccc} ${wireless_link_bar 7,50 wlan0} # stuff after 'TEXT' will be formatted on screen TEXT ${color}antiX-M8.5-Icewm ${color}$sysname $kernel ${color}Uptime: $uptime
${color}${time %a %d %b %k:%M} ${color}Monitors: ${color}cpu: ${color}${cpu}% ${color}ram : ${color}$mem${color}/${color}$memmax ${color}- ${color}$memperc% ${color}processes: ${color}$processes ${color}running: ${color}$running_process es ${color}Wireless: ${color} ${wireless_link_bar 7,50 wlan0} ${color}Battery: ${color} ${battery_bar BAT0} ${battery_percent BAT0}% ${color0}CPU Temp: ${color}${acpitemp}${color}Celsius ${color}Root:${color} ${fs_free /} ${color}= ${fs_free_perc /}% ${color}/home:${color} ${fs_free /mnt/sdb1} ${color}= ${fs_free_perc /mnt/sdb1}% ${color white}${exec sensors | grep 'RPM'} ${exec sensors |grep temp | cut -c1-16} ================================================================================ =============================================================== background no use_xft yes xftfont HandelGotD:size=9 xftalpha 0.1 update_interval 1 total_run_times 0 own_window yes own_window_type normal own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager double_buffer yes minimum_size 200 5 maximum_width 200 draw_shades no draw_outline no draw_borders no draw_graph_borders no default_color white default_shade_color red default_outline_color green alignment top_right gap_x 0 gap_y 30 no_buffers yes uppercase no cpu_avg_samples 2 net_avg_samples 1 override_utf8_locale no use_spacer yes TEXT ${font LCD:style=Bold:pixelsize=30}${alignc}${time %H:%M:%S}${font Snap.se:size= 8} Up-time: $alignc$uptime_short ${color white}${cpugraph ffffff ffffff} CPU:1 ${cpu cpu1}% $alignc${cpubar cpu1} CPU:2 ${cpu cpu2}% $alignc${cpubar cpu2} MEM $alignc $mem / $memmax $alignr $memperc% $membar /home I/O: $diskio $alignc${fs_used /home} / ${fs_size /home} $alignr ${fs_bar /home}
${fs_free_perc /home}% ${font LCD:style=Bold:pixelsize=20}${alignc}Processes${font Snap.se:size=8} $alignr $running_processes Running $alignr $processes Sleeping CPUHOGS $alignr CPU MEM ${top name 1}$alignr${top cpu 1}${top mem 1} ${top name 2}$alignr${top cpu 2}${top mem 2} MEMHOGS $alignr CPU MEM ${top_mem name 1}$alignr${top_mem cpu 1}${top_mem mem 1} ${top_mem name 2}$alignr${top_mem cpu 2}${top_mem mem 2} ${font LCD:style=Bold:pixelsize=20}${alignc}Network${font Snap.se:size=8} $alignr${tcp_portmon 32768 61000 count} Connections IP: $alignr ${addr wlan0} ${wireless_link_bar wlan0} Down $alignr ${downspeed wlan0}/s Up $alignr ${upspeed wlan0}/s Rate: $alignr ${wireless_bitrate wlan0} ================================================================================ ========================================================================== # Default colors and also border colors, grey90 == #e5e5e5 default_color white own_window_colour black # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type normal own_window_transparent yes own_window_class Conky own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 4 gap_y 4 # stuff after 'TEXT' will be formatted on screen TEXT ${color }$nodename ${hr} ${color #9fb6cd}Kernel:$alignr${color }$kernel ${color #9fb6cd}UpTime: $alignr${color }$uptime ${cpugraph 20,130 000000 ffffff} ${color #9fb6cd}Load: $alignr${color }$loadavg
${color #9fb6cd}Processes: $alignr${color }$processes ${color #9fb6cd}Running: $alignr${color }$running_processes ${color #9fb6cd}Highest CPU: ${color #ddaa00} ${top name 1}$alignr${top_mem cpu 1} ${color lightgrey} ${top name 2}$alignr${top cpu 2} ${color lightgrey} ${top name 3}$alignr${top cpu 3} ${color lightgrey} ${top name 4}$alignr${top cpu 4} ${color lightgrey} ${top name 5}$alignr${top cpu 5} ${color #9fb6cd}Highest MEM: ${color #ddaa00} ${top_mem name 1}$alignr${top_mem mem 1} ${color lightgrey} ${top_mem name 2}$alignr${top_mem mem 2} ${color lightgrey} ${top_mem name 3}$alignr${top_mem mem 3} ${color lightgrey} ${top_mem name 4}$alignr${top_mem mem 4} ${color lightgrey} ${top_mem name 5}$alignr${top_mem mem 5} ${color #9fb6cd}CPU TEMP:$alignr${color}${hddtemp /dev/sda} ${color #9fb6cd}MEM: $alignr${color } $memperc% $mem/$memmax ${membar 3,100} ${color #9fb6cd}ROOT: $alignr${color }${fs_free /}/${fs_size /} ${fs_bar 3,100 /}
${color #9fb6cd}${time %a, } $alignr${color }${time %e %B %G} ${color #9fb6cd}${time %Z, }$alignr${color }${time %H:%M:%S} ${color lightgray}${execi 40000 cal} ${texeci 60 pymetar EGBB} ================================================================================ =====================================================ERRORS================= # set to yes if you want Conky to be forked in the background background yes cpu_avg_samples 2 net_avg_samples 2 out_to_console no # X font when Xft is disabled, you can pick one with program xfontsel #font 7x12 #font 6x10 #font 7x13 font 12x12 #font 7x12 #font *mintsmild.se* #font -*-*-*-*-*-*-34-*-*-*-*-*-*-* #font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1 # Use Xft? use_xft yes # Xft font when Xft is enabled xftfont comic sans ms:size=9 own_window_transparent yes own_window_colour 424242 own_window_type desktop # Create own window instead of using desktop (required in nautilus, pcmanfm and rox desktops) own_window no
# Text alpha when using Xft xftalpha 0.8 #on_bottom no # mail spool mail_spool $MAIL # Update interval in seconds update_interval 1 # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # Minimum size of text area minimum_size 5 5 maximum_width 250 # Draw shades? draw_shades no # Draw outlines? draw_outline yes # Draw borders around text draw_borders no # Stippled borders? stippled_borders 0 # border margins border_margin 10 # border width border_width 2 # Default colors and also border colors default_color white default_shade_color 000000 default_outline_color 000000 # Text alignment, other possible values are commented alignment top_left #alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 10 # Add spaces to keep things from moving about? This only affects certain object s. use_spacer right # Subtract file system buffers from used memory? no_buffers yes
# set to yes if you want all text to be in uppercase uppercase no # boinc (seti) dir # seti_dir /opt/seti # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # Possible variables to be used: Variable acpiacadapter acpifan acpitemp adt746xcpu adt746xfan battery buffers cached color cpu cpubar downspeed downspeedf exec Description ACPI ac adapter state. ACPI fan state ACPI temperature. CPU temperature from therm_adt746x Fan speed from therm_adt746x (num) Remaining capasity in ACPI or APM battery. ACPI battery number can be given as argument (default is BAT0). Amount of memory buffered Amount of memory cached (color) Change drawing color to color CPU usage in percents (height) Bar that shows CPU usage, height is bar's height in pixels net Download speed in kilobytes net Download speed in kilobytes with one decimal shell command Executes a shell command and displays the output in torsmo. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch :-). interval, shell Same as exec but with specific interval. command Interval can't be less than update_interval in configuration. (height), (fs) Bar that shows how much space is used on a file system. height is the height in pixels. fs is any file on that file system. (fs) Free space on a file system available for users. (fs) Free percentage of space on a file system available for users. (fs) File system size (fs) File system used space (height) Horizontal line, height is the height in pixels (dev), type, n I2C sensor from sysfs (Linux 2.6). dev may be omitted if you have only one I2C device. type is either in (or vol) meaning voltage, fan meaning fan or temp meaning temperature. n is number of the sensor. See /sys/bus/i2c/devices/ on your local computer. Kernel version (1), (2), (3) System load average, 1 is for past 1 minute, 2 for past 5 minutes and 3 for past 15 minutes. Machine, i686 for example Mail count in mail spool. You can use program like fetchmail to get mails from Arguments
execi fs_bar
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
mem membar memmax memperc new_mails nodename outlinecolor pre_exec processes running_processes shadecolor stippled_hr swapbar swap swapmax swapperc sysname time totaldown
(height)
some server using your favourite protocol. See also new_mails. Amount of memory in use Bar that shows amount of memory in use Total amount of memory Percentage of memory in use Unread mail count in mail spool. Hostname Change outline color Executes a shell command one time before torsmo displays anything and puts output as text. Total processes (sleeping and running) Running processes (not sleeping), requires Linux 2.6 Change shading color Stippled (dashed) horizontal line Bar that shows amount of swap in use Amount of swap in use Total amount of swap Percentage of swap in use System name, Linux for example Local time, see man strftime to get more information about format Total download, overflows at 4 GB on Linux with 32-bit arch and there doesn't seem to be a way to know how many times it has already done that before torsmo has started. Total upload, this one too, may overflow Number of updates (for debugging) Upload speed in kilobytes Upload speed in kilobytes with one decimal Uptime Uptime in a shorter format Seti@home current progress Seti@home current progress bar Seti@hoome total user credit
(format) net
(height)
## antiX additives examples. Add below Text## ##${color cccccc}battery: ${color cccccc}$acpiacadapter, ${battery_percent BAT1} % ##${color}battery:${color} ${battery} ##Witeless example## #${color cccccc}Wireless: #${color cccccc}essid: ${wireless_essid wlan0} #${color cccccc}IP:${color cccccc} ${addr wlan0} #${color cccccc}speed: ${color cccccc} ${wireless_bitrate wlan0} #${color cccccc}link strength: ${color cccccc} ${wireless_link_bar 7,50 wlan0} # stuff after 'TEXT' will be formatted on screen TEXT
${color cccccc}System: BIKER ${color cccccc}$sysname $kernel ${color cccccc}Uptime: $uptime ${font comic sans ms:size=20}${time %a %r}${font} ${color cccccc}File System Space: ${color cccccc}${fs_bar 10,150 /} ${fs_free /} ${color cccccc}CPU: Load: ${color fc8208}${cpu}% $alignr${color cccccc}Temperature: ${color fc8208}$ {acpitemp}'C ${color cccccc}${cpugraph 32,200 000000 fc8208} ${color #cccccc}Name PID MEM% CPU% ${color #cccccc} ${top name 1}${top pid 1} ${top mem 1} ${top cpu 1} ${color #cccccc} ${top name 2}${top pid 2} ${top mem 2} ${top cpu 2} ${color cccccc}Processes: ${color cccccc}$processes ${color cccccc}running: ${c olor cccccc}$running_processes ${color cccccc}RAM: ${color cccccc}$mem${color}/${color cccccc}$memmax ${color c ccccc}- ${color}$memperc% ${color cccccc}SWAP: ${color cccccc}$swap${color}/${color cccccc}$swapmax ${col or cccccc}- ${color}$swapperc% ${if_up wlan0}${color cccccc}Wifi: ${wireless_essid wlan0} ${color cccccc}IP:${color cccccc} ${addr wlan0} ${color cccccc}speed: ${color cccccc} ${wireless_bitrate wlan0} ${color cccccc}link strength: ${color 9e9e9e} ${wireless_link_bar 10,120 wlan0} ${color 4afb04}Downspeed: $alignr${color 4afb04}Upspeed: ${color cccccc}${downspeedgraph wlan0 20,100 4afb04 0000ff} $alignr${color ccccc c}${upspeedgraph wlan0 20,100 0000ff 4afb04} ${endif}${if_up eth0}${color cccccc}Wired: ${color cccccc}IP:${color} ${addr eth0} ${color 4afb04}Downspeed: $alignr${color 4afb04}Upspeed: ${color cccccc}${downspeedgraph eth0 20,100 4afb04 0000ff} $alignr${color cccccc }${upspeedgraph eth0 20,100 0000ff 4afb04} ${endif}${if_match ${battery_percent BAT0} >= 50} ${color cccccc}Battery: ${color 4afb04}${battery_bar 10,125 BAT0} ${color 4afb0 4}${battery_percent BAT0}% ${else}${if_match ${battery_percent BAT0} > 15} ${color cccccc}Battery: ${color fc8208}${battery_bar 10,125 BAT0} ${color fc820 8}${battery_percent BAT0}% ${else}${color}Battery: ${color fd0000}${battery_bar 10,125 BAT0} ${color fd000 0}${battery_percent BAT0}%${endif} ${endif}${color cccccc}Sound: ${if_mixer_mute} ${color red}Muted: ${mixerbar Master 10,160} ${else}${color cccccc}Level: ${mixerbar Master 10,162}${endif} ${if_match ${battery_percent BAT0} <= 15}${execi 15 notify-send -t 5000 -i /usr/ share/icons/gTangish-2.0a1/48x48/status/battery-caution.png "Battery Low" "Batte ry Level is 15% Suggesting to save your work, or p lug in the computer."}${endif} ${if_match ${acpitemp} >= 90}${execi 15 notify-send -t 5000 -i /usr/share/icons/ gTangish-2.0a1/48x48/status/dialog-warning.png "Tempurature High" "Shut Down wil l occur if Tempurature rises. Suggesting you save your work"}${endif} ${if_match ${battery_percent BAT0} <= 5}${exec lowbattery}${endif} ${if_match ${acpitemp} >= 95}${exec hightemp}${endif} ================================================================================ ================================================ERRORS====================== background no font Sans:size=8 use_xft yes
xftalpha 1.0 update_interval 1.0 total_run_times 0 own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager double_buffer yes #minimum_size 200 12 maximum_width 125 draw_shades no draw_outline no draw_borders no draw_graph_borders yes default_color white color2 orange #default_shade_color blue #default_outline_color green alignment top_right gap_x 5 gap_y 5 no_buffers yes #uppercase no cpu_avg_samples 2 override_utf8_locale yes TEXT ${font Sans:size=8:bold}${color2}SYS ${hr 1}${color}${font} $kernel ${alignr}$machine CPU: ${alignr}$freq_g GHz $cpu% ${cpubar 4} ${cpugraph 25,125 000000 6495ED} MEM: ${alignr}$mem $memperc% ${membar 4} ${font Sans:size=8:bold}${color2}TEMPS ${hr 1}${color}${font} CPU: ${alignr}${hwmon 0 temp 1}C MBD: ${alignr}${hwmon 0 temp 2}C GPU: ${alignr}${execi 10 nvidia-settings -q gpucoretemp -t}C SDA: ${alignr}${execi 10 hddtemp /dev/sda |cut -c34-35}C SDB: ${alignr}${execi 10 hddtemp /dev/sdb |cut -c34-35}C ${font Sans:size=8:bold}${color2}FANS ${hr 1}${color}${font} CPU: ${alignr}${hwmon 0 fan 1} RPM CH2: ${alignr}${hwmon 0 fan 3} RPM CH3: ${alignr}${hwmon 0 fan 4} RPM PWR: ${alignr}${hwmon 0 fan 5} RPM ${font Sans:size=8:bold}${color2}NET ${hr 1}${color}${font} IN: ${alignr}${downspeed eth0} k/s ${downspeedgraph eth0 25,125 000000 6495ED} OUT: ${alignr}${upspeed eth0} k/s ${upspeedgraph eth0 25,125 000000 6495ED} TOTAL IN: ${alignr}${totaldown eth0} TOTAL OUT: ${alignr}${totalup eth0} ${font Sans:size=8:bold}${color2}HDD ${hr 1}${color}${font} ROOT: ${alignr}${fs_used /} ${fs_bar 4 /} HOME: ${alignr}${fs_used /home} ${fs_bar 4 /home} ${if_mounted /media/data}DATA: ${alignr}${fs_used /media/data} ${fs_bar 4 /media/data}${endif} ${if_mounted /media/usb1}USB1: ${alignr}${fs_used /media/usb1}
${fs_bar 4 /media/usb1}${endif} ${if_mounted /media/usb2}USB2: ${alignr}${fs_used /media/usb2} ${fs_bar 4 /media/usb2}${endif} ================================================================================ ================================================================================