Actuador Limitorque MX y QX

Limitorque MX and QX Valve Actuators
Next-generation electronic actuators
Experience In Motion
Flowserve Limitorque Actuation Systems

Limitorque is an operating unit of Flowserve, a $4 billion-plus company strongly focused on automation and support of the valve industry. Introduced in 1929, Limitorque has 80-plus years of experience in actuating every type of valve. Proven history as an industry leader and innovator 240,000-square-foot manufacturing and assembly facility in Lynchburg, VA, USA Global quick response centers in Houston, TX; Suzhou, China; Bangalore, India; and Newbury, UK Global service network of factory-trained technicians provides excellent after-sales support Complete range of products: - Multi-turn products up to 18,000 ft-lb of torque and 500,000 lb of thrust - Quarter-turn products up to 614,000 ft-lb of torque Low maintenance, high reliability, durability and long-life actuators that translate into low cost of ownership Complete and competitive valve control solutions for all industries
State-of-the-art Actuation
The Flowserve Limitorque QX quarter-turn and MX multi-turn electronic valve actuators lead the industry in quality, safety and ease of use. The MX included innovations that were market firsts when introduced, and the latest MX and QX models have improved on these while adding to the list: Non-intrusive design employs selection knobs with solid-state Hall-effect devices instead of reed switches that can fail with age and vibration Non-contacting absolute encoders for accurate position sensing. Batteries are not required for the absolute encoder to retain position data in the event of loss of main power thus eliminating the need for costly battery maintenance programs or the potential loss of equipment availability due to battery failure The absolute encoder includes redundant position sensors and comparator logic for increased reliability and safety Limigard technology uses internal logic to compare with external commands to prevent actuator malfunctions using a Fail/No Action philosophy Graphical display for access to operational data in 10 languages Optional Bluetooth wireless connectivity
The QX and MX provide the user with predictable, reliable and safe operation for years to come, in the most rigorous applications and extreme environments.
MX Multi-turn Actuator*
Electric Motor available for 3 phase, 1 phase & DC power supplies Handwheel for operation when electric power is not available, automatically returns to motor operation when the motor is energized Unique redundant non-contacting absolute encoder that doesnt require batteries to maintain position on loss of power
Flexible controls configurations 2, 3 or 4 wire control, 4-20mA input or digital network control Up to 8 output status contacts configurable to report any of 24 events 4-20mA output position and/or torque signal
Double-sealed terminal compartment to protect the electrical controls when the terminal cover is removed
Configuration is performed using knobs equipped with rare earth magnets that excite the solid state Hall effect devices that make actuator set-up choices without the need for any additional tools or devices
Graphical display improves visibility, allows for 180 rotation of the text and displays diagnostic graphs, actuator set-up & diagnostics in 10 languages
owserve.com
Limitorque QX Quarter-turn and QXM Multi-turn Actuator**

Double-sealed terminal compartment to protect the electrical controls when the terminal cover is removed Advanced brushless DC motor that supports most global voltages single phase and three phase AC and 24-250 VDC Handwheel for operation when electric power is not available, automatically returns to motor operation when the motor is energized
Adjustable Mechanical Stops for quarter turn applications
A redundant absolute encoder that is accurate to 1/10th of one degree resolution of output rotation
Graphical display improves visibility, allows for 180 rotation of the text and displays diagnostic graphs, actuator set-up & diagnostics in 10 languages
Configuration is performed using knobs equipped with rare earth magnets that excite the solid state Hall Effect devices that make actuator set-up choices without the need for any additional tools or devices
Flexible controls configurations 2, 3 or 4 wire control, 4-20mA input or digital network control Up to 8 output status contacts configurable to report any of 24 events 4-20mA output position and/or torque signal
* For more information, refer to the MX sales brochure, LMENBR2302. ** For more information, refer to the QX sales brochure, LMENBR3302.
MX and QX Network Communications

The MX provides a comprehensive network option portfolio to the User. Network solutions are improved with the addition of DeviceNet to complement Modbus, Foundation Fieldbus H1, Profibus DP_V1 and Profibus PA. MX provides the User with predictable, reliable and safe operation for years to come, in applications that are subject to the most rigorous requirements and environmental extremes.
Profibus PA communication with DTM

A Profibus PA protocol is available and complies with EN50170 Fieldbus Standard and Fieldbus physical layer per IEC 61158-2 for communications. The device supports several topologies such as point-to-point, bus with spurs, daisy chain, tree or a combination of these.
DDC (Distributed Digital Control) Modbus Communication

DDC is Flowserve Limitorques digital communication control system that provides the ability to control and monitor up to 250 actuators over a single twisted-pair cable. The communication network employs Modbus protocol on an RS-485 network and is redundant. The field unit also communicates all actuator status and alarm diagnostic messages over the same communication network. DDC Network Single-ended loop (consult factory) Modbus protocol High speed up to 19.2 k baud
DeviceNet
DeviceNet complies with CAN-based protocol.
Master Station III

MX and QX units equipped with DDC can be controlled via Flowserve Limitorques Master Station III. It includes: Host interface Industry-standard Modbus Rtu, ASCI, UDP, and TCP/IP protocols and control 5.6" TFT touch-screen display for network configuration status Configurable polling sequence priority Network time protocol for time synchronization of alarms/ diagnostics data to host device Modular hot-swappable redundant design E-mail notifications of alarm conditions Data/event logging
Foundation Fieldbus communication with Device Type Manager (DTM) technology

The MX and QX can be fitted with Foundation Fieldbus protocol that complies with the IEC 61158-2 Fieldbus H1 standard. The field unit device is able to support several topologies such as point-to-point, bus with spurs, daisy chain, tree or a combination of these
Profibus DP V1 communication with DTM

The MX and QX can be fitted with Profibus DP_V1 protocol field units that comply with EN50170 Fieldbus Standard for RS-485 communications. The device supports several topologies such as point-to-point, bus with spurs, daisy chain, tree or a combination of these. The DTM supports Flowserve's ValveSight diagnostic engine.
Truly Global Designs

The QX and MX actuators have been tested to demonstrate compatibility with an extensive list of US, Canadian, EU and IEC regulations, allowing use in the harshest conditions found in applications anywhere in the world.
IEC IP68 NEMA FM ATEX EExd CENELEC CE
MILSTD IEEE EN ANSI/ISA EMC CSA ASTM
For more information on the features, options and certifications of the Limitorque MX, consult Flowserve bulletin LMENBR2302 and for the QX, consult bulletin LMENBR3302.
Flowserve Corporation Flow Control

United States Flowserve Limitorque 5114 Woodall Road P.O. Box 11318 Lynchburg, VA 24506-1318 Phone: 434-528-4400 Facsimile: 434-845-9736
England Flowserve Limitorque Euro House Abex Road Newbury Berkshire, RG14 5EY United Kingdom Phone: 44-1-635-46999 Facsimile: 44-1-635-36034 Japan Limitorque Nippon Gear Co., Ltd. NOF Bldg. 9th Floor 1-11-11, Kita-Saiwai, Nishi-Ku Yokohama (220-0004) Japan Phone: 81-45-326-2065 Facsimile: 81-45-320-5962
Singapore Flowserve Limitorque 12, Tuas Avenue 20 Singapore 638824 Phone: 65-6868-4628 Facsimile: 65-6862-4940 China Limitorque Beijing, Pte., Ltd. RM A1/A2 22/F, East Area, Hanwei Plaza No. 7 Guanghua Road, Chaoyang District Beijing 100004, Peoples Republic of China Phone: 86-10-5921-0606 Facsimile: 86-10-6561-2702 India Flowserve Limitorque, Ltd. Plot No 4 Export Promotional Industrial Park Whitefield, Bangalore 560066 India Phone: 91-80-40146200 Facsimile: 91-80-28410286
FCD LMENBR0008-00 Printed in USA.

Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in connection with the specific application. While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices. 2011 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.

Actuador Limitorque MX y QX

Uploaded by

Copyright:

Available Formats

Actuador Limitorque MX y QX

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Actuador Limitorque MX y QX

Uploaded by

Copyright:

Available Formats

What are some of the key features of the MX and QX actuators?

What communication protocols do the MX and QX support?

Limitorque MX and QX Valve Actuators

Next-generation electronic actuators

Flowserve Limitorque Actuation Systems

Limitorque QX Quarter-turn and QXM Multi-turn Actuator**

Adjustable Mechanical Stops for quarter turn applications

MX and QX Network Communications

Profibus PA communication with DTM

DDC (Distributed Digital Control) Modbus Communication

Master Station III

Foundation Fieldbus communication with Device Type Manager (DTM) technology

Profibus DP V1 communication with DTM

Truly Global Designs

IEC IP68 NEMA FM ATEX EExd CENELEC CE

MILSTD IEEE EN ANSI/ISA EMC CSA ASTM

Flowserve Corporation Flow Control

FCD LMENBR0008-00 Printed in USA.

You might also like