Scribd Logo
Upload

Welcome to Scribd!

  • 137 views

    LNL TS 2220

    Uploaded by

    David YH
    The LNL-2220 is a single board solution for interfacing one or two doors to an OnGuard(r) system. It allows Ethernet connection directly from an entry location to the OnGuard server. The downstream RS-485 two-wire port can be used to connect up to 32 devices.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    LNL TS 2220

    Uploaded by

    David YH
    137 views2 pages
    The LNL-2220 is a single board solution for interfacing one or two doors to an OnGuard(r) system. It allows Ethernet connection directly from an entry location to the OnGuard server. The downstream RS-485 two-wire port can be used to connect up to 32 devices.

    Original Title

    LNL_TS_2220

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The LNL-2220 is a single board solution for interfacing one or two doors to an OnGuard(r) system. It allows Ethernet connection directly from an entry location to the OnGuard server. The downstream RS-485 two-wire port can be used to connect up to 32 devices.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    137 views2 pages

    LNL TS 2220

    Uploaded by

    David YH
    The LNL-2220 is a single board solution for interfacing one or two doors to an OnGuard(r) system. It allows Ethernet connection directly from an entry location to the OnGuard server. The downstream RS-485 two-wire port can be used to connect up to 32 devices.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Intelligent Dual Reader Controller

    LNL-2220
    Overview
    The LNL-2220 Intelligent Dual Reader Controller (IDRC) by Lenel provides a single board solution for interfacing one or two doors to an OnGuard system. In addition, other I/O and reader interface modules can be added on the LNL-2220s downstream port to expand its capabilities. The LNL-2220 revolutionizes access control system architecture by allowing Ethernet connection directly from an entry location to the OnGuard server, while still providing the security, functionality, and modularity of Lenels proven hardware platform. The LNL-2220 is scalable for any access control application, from the most basic to the most sophisticated. In the event of communication loss, the LNL-2220 allows nearly all local functionality to continue unimpaired until the server connection is restored. Utilizing its native Ethernet communications and an advanced 32bit processor, the LNL-2220 can communicate upstream to the host computer through its Ethernet port (with a throughput up to eight times greater than the fastest serial connections), or at up to 115.2 Kbps using RS-232 communication directly or through an external dial-up modem. The LNL-2220 can store up to 250,000 cardholders in non-volatile flash memory, and supports selective download for larger cardholder databases. The downstream RS-485 two-wire port can be used to connect up to 32 devices (maximum 64 doors). Two on-board reader ports support Data1/Data0, Clock/Data, Bioscrypt RS-485 readers and the bidirectional RS-485 Open Supervised Device Protocol (OSDP) communications. Each LNL-2220 supports up to eight different card formats. The LNL-2220 includes eight inputs that support normally open, normally closed, supervised, and unsupervised circuits. In addition, four output relays support fail-safe or fail-secure operation.

    FEATURES & FUNCTIONALITY


    Controller Functionality On-board Ethernet 10/100Base-T port provides up to 8 times greater throughput than serial-to-Ethernet converters. DHCP and fixed IP addressing supported. DNS device naming through DHCP extended commands 6 MB of available on-board, non-volatile flash memory Battery-backed, non-volatile storage of 50,000 events Firmware stored in flash memory, background download of firmware updates supported Supports up to 16 different formats (8 card formats and 8 asset formats) Biometric template storage support for Schlage Recognition Systems, Bioscrypt, and Identix. Direct connection of Bioscrypt RS-485 devices Enhanced anti-passback capabilities Up to 32,000 access level permissions 255 holidays with grouping, 255 timezones, each with 6 intervals Elevator control support for up to 128 floors Individual extended held open and strike times (ADA required) Up to 9-digit user PIN codes 20 status LEDs 2 dedicated inputs for tamper and power failure status 12 or 24 VDC input power Advanced Encryption Standard (AES) 128-bit algorithm for communications Reader Interface Functionality Supports Data1/Data0, Clock/Data and Lenel OSDP-compatible RS-485 readers and keypads 4 Form-C relay outputs, 5 A at 30 VDC Door contact supervision (open/closed) and REX push-button monitor for each door Strike control and auxiliary output for each door Bicolor reader status LED support plus beeper control, or 2-wire LED support On-board regulator allows 12 VDC reader power from 24 VDC power source

    LNL-2220

    Intelligent System Controller (ISC) Max 8 Devices

    RS-485 Multi-drop up to 4000 ft.

    OnGuard Security Server

    TCP/IP NETWORK

    LNL-1300

    Single Reader Interface Module

    Dual Reader Interface Module

    LNL-1320

    LNL-1100

    Input Control Module Up to 16 Inputs per LNL-1100

    Output Control Module Up to 16 Outputs per LNL-1200

    LNL-1200

    Motion Sensor
    Option 2.1 Option 2.2

    Alarm

    -OR-

    Reader

    Reader

    Reader

    Reader

    Reader

    Reader

    Reader

    Controller Features
    LNL-2220 6 MB On-board flash memory available for cardholder & asset database, 50,000 event battery backed RAM for event log Dial-Up Modem LNL-56KEXT LNL-DC336K 56 K external modem with cables 12 VDC-powered/33.6 K external modem

    Specifications
    Primary Power (DC or AC) DC input: AC input: Memory and Clock backup Communication Ports Primary (Ethernet) Port: Alternate Upstream Port 1: Downstream Port 2: Inputs Tamper and Power Fail Monitors: Door position, REX, and AUX: Outputs Relay outputs: 4 Form-C 5 A at 30 VDC relay outputs: 2 strike, 2 auxiliary Unsupervised, dedicated 8, each programmable as normally open or normally closed, supervised or unsupervised circuits 10/100Base-T Ethernet high-speed port RS-232 9600 to 115.2 Kbps async RS-485 (2-wire) 9600 to 38.4 Kbps async Humidity: Mechanical Dimensions: Weight: Approvals Supported Readers Approvals: 6 x 5 x 1 in. (152 x 127 x 25 mm) 8 oz. (230 g) nominal UL 294, CE-marked, RoHS compliant Schlage Wireless - WA 5296, WA 5696, WA 5694, WA 993, WRI, WPR FCC Part 15, CE, RoHS, UL 294, UL 294, UL 1076, ULC CSA-C22.2, CAN/ULC-S319-05, cUL/ORD-C1076 Environmental Temperature: Operating: 32 to 158 F (0 to +70 C) Storage: -67 to 185 F (-55 to +85 C) 0 to 95% RHNC * The LNL-2220 is for use in low voltage, power-limited, class 2 circuits only. 12 or 24 VDC 15%. 500 mA maximum 12 VAC 15%. 400 mA RMS Reader Port Compatibility 3 V lithium, type BR2325, BR2330, CR2330 Reader Power DC output: 12 VDC, 125 mA regulated when 24 VDC powered, or 12 to 24 VDC 125 mA current limited Wiegand Data1/Data0, Magnetic Clock/Data, F/2F single-wire protocol, Bioscrypt RS-485, OSDP (Open Supervised Device Protocol RS-485)

    lenel.com
    (866) 788-5095
    Specifications subject to change without notice. 2013 Lenel Systems International, Inc. All rights reserved. All other trademarks and copyrights are the property of their respective owners.
    LNL_TS_2220_102813

    You might also like