Engineering Standard

SAES-Z-002 Technically Accepted Process Automation Systems Process Control Standards Committee Members
Qaffas, Saleh A., Chairman Assiry, Nasser Y., Vice Chairman Awami, Luay H. BenDuheash, Adel O. Busbait, Abdulaziz M. Dunn, Alan R. ElBaradie, Mostafa M. Esplin, Douglas S. Fadley, Gary L. Genta, Pablo D. Ghamdi, Ahmed S. Green, Charlie M. Hazelwood, William P. Hubail, Hussain M. Jansen, Kevin P. Khalifa, Ali H. Khan, Mashkoor A. Mubarak, Ahmed M. ShaikhNasir, Mohammed A. Trembley, Robert J.

28 May 2006

Saudi Aramco DeskTop Standards

Table of Contents

1 2 3 4 5 6 7

Scope............................................................. Conflicts and Deviations................................ References..................................................... Definitions...................................................... General.......................................................... Restricted Vendor List For Process Automation Systems................. Recommended Vendor List For Process Automation Systems.................

2 2 2 3 3 4 6

Previous Issue: New

Next Planned Update: 28 May 2011 Page 1 of 8

Primary contact: Kinsley, John Arthur on 966-3-8730952 CopyrightSaudi Aramco 2005. All rights reserved.

Document Responsibility: Process Control Issue Date: 28 May 2006 Next Planned Update: 28 May 2011

SAES-Z-002 Technically Accepted Process Automation Systems

Scope 1.1 This Standard identifies acceptable manufacturers for Process Automation Systems. This Standard does not apply to purchasing procedures associated with Process Automation Systems for replenishment of SAMSS stock. This standard contains both Restricted and Recommended Vendor's Lists for Process Automation Systems. The Distributed Control Systems (DCS) RVL and SCADA RVL are Restricted Vendor Lists. All others are Recommended Vendor Lists.

1.2

Conflicts and Deviations 2.1 All conflicts between this standard and other applicable Saudi Aramco Engineering Standards (SAESs), Materials System Specifications (SAMSSs), Standard Drawings (SASDs), or industry standards, codes, and forms shall be resolved in writing by the Company or Buyer Representative through Manager, Process & Control Systems Department, Saudi Aramco, Dhahran. Direct all requests to deviate from this standard in writing to the Company or Buyer Representative, who shall follow internal company procedure SAEP-302 and forward such requests to the Manager, Process & Control Systems Department, Saudi Aramco, Dhahran.

2.2

References Saudi Aramco References Saudi Aramco Engineering Procedure SAEP-15 SAEP-302 Preparation of Restricted Vendors Lists for Process Automation Systems Instructions for Obtaining a Waiver of a Mandatory Saudi Aramco Engineering Requirement

Saudi Aramco Materials System Specifications 23-SAMSS-010 23-SAMSS-020 23-SAMSS-030 23-SAMSS-050 Distributed Control Systems Supervisory Control and Data Acquisition (SCADA) Systems Remote Terminal Unit Terminal Management Systems

Page 2 of 8

Document Responsibility: Process Control Issue Date: 28 May 2006 Next Planned Update: 28 May 2011

SAES-Z-002 Technically Accepted Process Automation Systems

34-SAMSS-621 34-SAMSS-622 34-SAMSS-623 34-SAMSS-624

ESD Systems Hardwired Solid State (NonProgrammable) ESD Systems Electromagnetic Relay Programmable Controller Based ESD Systems Wellhead Control, Monitoring and Shutdown

Saudi Aramco Engineering Standard SAES-Z-003 4 Definitions Terms shown in bold font within this document are defined below: 9COM: Is a material number used within SAP system to represent a "Commodity Number". The 9COM number represents a particular category of item and whether or not materials belonging to that category are inspectable or not. Approval: Written authorization by the Manager, Process & Control Systems Department, Saudi Aramco, Dhahran. P&CSD: Process & Control Systems Department, Saudi Aramco Restricted Vendor List: A Restricted Vendor List (RVL) constitutes the exclusive list of vendors and their associated product lines qualified to provide the applicable class of process automation equipment to Saudi Aramco. Restricted Vendor Lists are prepared in accordance with procedures defined in SAEP-15. Restricted Vendor List is intended for only of the host systems (i.e., DCS and SCADA). Recommended Vendor List: Products contained in Recommended Vendor's Lists have been evaluated by P&CSD and found to be technically acceptable. Recommended Vendor List is intended for subsystems only (i.e., ESD and RTU). Supplier: The person/company etc. who is responsible to provide the equipment to Saudi Aramco. Vendor: The company whom is the manufacturer of the system or equipment. 5 General 5.1 Procurement of a product made by a manufacturer not listed in Section 6 of this Standard is not allowed without Approval. Requests for approval of an alternate manufacturer must be supported by documentation identifying how the alternate manufacturer would better serve Saudi Aramco over the manufacturers listed in this standard.
Page 3 of 8

Pipeline Leak Detection Systems

Document Responsibility: Process Control Issue Date: 28 May 2006 Next Planned Update: 28 May 2011

SAES-Z-002 Technically Accepted Process Automation Systems

5.2

The listings within sections 6 and 7 shall be interpreted in the following manner: 5.2.1 System Name denotes the name of the system which as been determined to be acceptable. A particular vendor may manufacture more than one system for the type of application. Only the system shown in the "System Name" column may be used. Release Tested denotes the latest revision level of the system which has been evaluated by P&CSD and determined to be acceptable. Requests to use a more recent revision level or a previous version to the revision listed shall be directed to the General Supervisor, Process Control Division, P&CSD, Saudi Aramco, Dhahran.
Commentary Notes: The intention of this requirement is to ensure the use of the most recent revision level which meets Company requirements. It is not the intention to limit user to only the releases listed in this document. In general, minor revisions within a Major Release do not need Approval. However, vendors are not consistent in how they designate major vs. minor releases. Therefore, users are required to consult with P&CSD on the specifics of any release which is newer than that listed. P&CSD recommendation is to use the most recent, approved revision level for a given system. However, it is recognized that for certain projects where a system is being "expanded", there are valid reasons to use a revision level which is prior to the one listed in the tables. Expansions to existing systems do not require P&CSD Approval to use a prior revision level system.

5.2.2

5.2.3 5.2.4 5.2.4

Vendor is listed with the word "None" as a "Limitation": The system listed in the "System Name" column may be used without restriction. Vendor is listed with a "Limitation": The system listed in the "System Name" Column may be used with the restrictions noted. Vendor or Manufacturer is listed as "On-Hold" in the "Limitation" column: Purchasing the system from a vendor whom is listed as "OnHold" is prohibited, unless such a deviation is mandated by a business decision for a specific purchase order.

Restricted Vendor List For Process Automation Systems 6.1 Equipment: Distributed Control Systems for FOUNDATION Fieldbus (FF) 9COM: 6000001537 Specification: 23-SAMSS-010

Page 4 of 8

Document Responsibility: Process Control Issue Date: 28 May 2006 Next Planned Update: 28 May 2011

SAES-Z-002 Technically Accepted Process Automation Systems

Vendor Yokogawa Honeywell Emerson Foxboro / Invensys

System Name CS3000 Experion PKS DeltaV Foxboro IA

Release Tested R3.05 R200 R7.3 V8.0

Limitations None No more than one controller per chassis None None

SAP Details
Manufacturer Yokogawa Electric Corp. Yokogawa Engineering Asia Yokogawa Middle East Yokogawa Corp. of America Honeywell Inc. Honeywell Honeywell Industrial Control Honeywell Middle East Emerson Emerson Process Mgmt. Invensys PLC Invensys Middle East Vendor / Plant ID 30001465 30000134 30003212 30003766 30001743 30003366 30001744 30003684 30001655 30003598 30002059 30003562 Location Musashino-Shi, JP Singapore Bahrain Stafford, TX, USA Phoenix, USA Calgary, Canada Houston, TX, USA Abu Dhabi, UAE Austin, TX, USA Calgary, Canada Foxboro, USA Dubai, UAE Limitations None None None None None None None On-Hold None None None None

6.2

Equipment: Supervisory Control and Data Acquisition Systems (SCADA) 9COM: 6000001547 Specification: 23-SAMSS-020
Vendor Yokogawa Bristol Babcock Cegelec GMBH Telvent Invensys System Name FAST/Tools OpenEnterprise ViewStar ICS Metso DNA iScada Release Tested V8.2 V2.5 V2.12 V7.3 R5.0 Limitations None None None None On-Hold

SAP Details
Manufacturer Yokogawa Systems Center Europe BV Yokogawa Middle East Yokogawa Corp. of America Bristol Babcock Ltd. Cegelec GMBH & Co. KG Invensys Middle East Vendor / Plant ID 30000135 30003212 30003766 30003547 30003547 30003562 Location Apeldoorn, NL Bahrain Stafford, TX, USA Worchester, GB Frankfurt, DE Dubai, UAE Limitations None None None None None On-Hold
Page 5 of 8

Document Responsibility: Process Control Issue Date: 28 May 2006 Next Planned Update: 28 May 2011

SAES-Z-002 Technically Accepted Process Automation Systems

Recommended Vendor List For Process Automation Systems 7.1 Equipment: Programmable Controller based Emergency Shutdown Systems 9COM: 6000002723 Specification: 34-SAMSS-623
Vendor Triconex / Invensys Triconex / Invensys ICS Triplex ABB-August System Name Tricon Trident Trusted SC300 Release Tested V10 V1.3 R3.4 N/A Limitations None Maximum 500 I/O per system None On-Hold

SAP Details
Manufacturer Invensys Middle East Triconex Corporation ICS Triplex Industrial Control Services ABB August Inc. ABB August Ltd. Vendor / Plant ID 30003562 30003780 30001898 30001186 30001711 30000172 Location Dubai, UAE Webster, TX, USA Houston, TX, USA Maldon, GB Houston, TX, USA Crawley, GB Limitations None None None None On-Hold On-Hold

7.2

Equipment: Programmable Wellhead Shutdown Systems 9COM: 6000002723 (Note: Same 9COM as Programmable ESD) Specification: 34-SAMSS-624
Vendor Yokogawa Triconex / Invensys Siemens System Name Prosafe Trident Quadlog Release Tested Revision 4 1.3 Revision 4 Limitations None None None

SAP Details
Manufacturer Yokogawa Systems Center Europe BV Yokogawa Engineering Asia Yokogawa Corp. of America Invensys Middle East Triconex Corporation Siemens Vendor / Plant ID 30000135 30000134 30003766 30003562 30003780 30001273 Location Apeldoorn, NL Singapore Stafford, TX, USA Dubai, UAE Webster, TX, USA Karlsruhe, DE Limitations None None None None None None

Page 6 of 8

Document Responsibility: Process Control Issue Date: 28 May 2006 Next Planned Update: 28 May 2011

SAES-Z-002 Technically Accepted Process Automation Systems

7.3

Equipment: Remote Terminal Units (RTU) 9COM: 6000002683 Specification: 23-SAMSS-030

Vendor Siemens Bristol Babcock GE Harris Yokogawa Model Number Sinaut, ST115, ST155, ST7-400, ST7-300 DPC 3310, 3330, 3331, 3332, 3335 Control wave, Control wave micro D20 Stardom FCN, FCJ Limitations None None None None

SAP Details
Manufacturer Siemens AG A&D AS EWK Siemens Automation & Drives Bristol Babcock Ltd. Bristol Babcock Inc. GE Energy Services Yokogawa Middle East Yokogawa Engineering Asia Yokogawa Corp. of America Vendor / Plant ID 30003832 30003472 30003547 30001469 30001734 30003212 30000134 30003766 Location Karlsruhe, DE Winchester, GB Worchester, GB Watertown, USA Calgary, Canada Bahrain Singapore Stafford, TX, USA Limitations None None None None None None None None

7.4

Equipment: Terminal Management Systems (TMS) 9COM: 6000001584 Specification: 23-SAMSS-050

Vendor Siemens Honeywell Emerson ABB System Name SINAUT PACOS Experion PKS - CTS AutoLoad Fulfil IT MAC / Advant TAS Release Tested N4.01 R100 N/A R3.3 Limitations None None None On-Hold

SAP Details
Manufacturer Siemens AG A&D I&S Honeywell Industrial Control Honeywell Automation India Emerson Process Mgmt. ABB Automation Inc. Vendor / Plant ID 30001273 30001744 30004031 30003598 30001713 Location Karlsruhe, DE Houston, TX, USA Pune, India Calgary, Canada Houston, TX, USA Limitations None None None None On-Hold

Page 7 of 8

Document Responsibility: Process Control Issue Date: 28 May 2006 Next Planned Update: 28 May 2011

SAES-Z-002 Technically Accepted Process Automation Systems

7.5

Equipment: Compressor Control Systems 9COM: 6000001582 Specification: None

Vendor Compressor Controls Corp. Triconex / Invensys GE Woodward Foxboro / Invensys Model Number Series 5 Vanguard, Series 5 - Reliant Tricon V10 TS-3000 MicroNet, MicroNet TMR, 505C Foxboro I/A V6.X Limitations None None None On-Hold

SAP Details
Manufacturer Invensys Middle East Compressor Controls Corp. Woodward Govenor Company Invensys / Foxboro Vendor / Plant ID 30003562 30003669 30002970 30002059 Location Dubai, UAE Des Moines, USA Fort Collins, USA Foxboro, MA, USA Limitations None None None On-Hold

7.6

Equipment: Leak Detection Systems 9COM: 6000002759 and 6000002884 Specification: SAES-Z-003
Vendor Acoustic Systems Inc. Energy Solutions International Multiphase Solutions EFA Technologies REL Instrumentation System Name WaveAlert ESI PAS VPM LeakNet ATMOS PIPE Limitations None None None None None

28 May 2006

Revision Summary New Saudi Aramco Engineering Standard.

Page 8 of 8