Product data sheet
Characteristics
RE7ML11BU
time delay relay 6 functions - 0.05..1 s - 24 V AC DC - 1OC
Main
Range of product Product or component type Component name Time delay type Zelio Time Industrial timing relay RE7 A C D Di H W 0.05 s...300 h 110...240 V AC 50/60 Hz 24 V AC/DC 50/60 Hz 42...48 V AC/DC 50/60 Hz
Time delay range [Us] rated supply voltage
Complementary
Discrete output type Contacts material Width pitch dimension Voltage range Connections - terminals Tightening torque Setting accuracy of time delay Repeat accuracy Temperature drift Voltage drift Minimum pulse duration Reset time Maximum switching voltage Mechanical durability [Ith] conventional free air thermal current [Ie] rated operational current Relay 90/10 silver nickel contacts 22.5 mm 0.85...1.1 Us Screw terminals, clamping capacity: 2 x 1.5 mm flexible with cable end Screw terminals, clamping capacity: 2 x 2.5 mm flexible without cable end 0.6...1.1 N.m +/- 10 % of full scale +/- 0.2 % < 0.07 %/C < 0.2 %/V 20 ms 50 ms 250 V AC/DC 20000000 cycles 8A <= 2 A DC-13 24 V at 70 C conforming to IEC 60947-5-1/1991/VDE 0660 <= 3 A AC-15 at 70 C conforming to IEC 60947-5-1/1991/VDE 0660 <= 0.1 A DC-13 250 V at 70 C conforming to IEC 60947-5-1/1991/VDE 0660 <= 0.2 A DC-13 115 V at 70 C conforming to IEC 60947-5-1/1991/VDE 0660 12 V/10 mA < 60 V X1Z2 terminal(s) < 60 V Y1Z2 terminal(s) 1 mA X1Z2 terminal(s) 1 mA Y1Z2 terminal(s) 3/4 wires sensors PNP/NPN without internal load, cable length: <= 50 m X1Z2 terminal(s) 3/4 wires sensors PNP/NPN without internal load, cable length: <= 50 m Y1Z2 terminal(s) Linear 47 kOhm (+/- 20 %), 0.2 W, cable length: <= 25 m Z1Z2terminal(s) CE III conforming to IEC 60664-1 250 V between contact circuit and control inputs IEC certified 250 V between contact circuit and power supply IEC certified 300 V between contact circuit and control inputs CSA certified 300 V between contact circuit and power supply CSA certified > 0.1 Uc
Minimum switching capacity Input voltage Maximum switching current Input compatibility
Potentiometer characteristic Marking Overvoltage category [Ui] rated insulation voltage
Supply disconnection value
Feb 4, 2012
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Operating position Surge withstand Power consumption in VA
Any position without derating 2 kV conforming to IEC 61000-4-5 level 3 0.7 VA 24 V 1.6 VA 48 V 1.8 VA 110 V 8.5 VA 240 V 0.5 W 24 V 1.2 W 48 V (15-16-18)OC (B1-A2)CO (X1)UNUSED (Y1)UNUSED (Z1)UNUSED (Z2)UNUSED ALT 78 mm 22.5 mm 80 mm 0.15 kg
Power consumption in W Terminal description
Height Width Depth Product weight
Environment
Immunity to microbreaks Standards Product certifications 3 ms EN/IEC 61812-1 CSA GL UL -40...85 C -20...60 C 15...85 % (3K3) conforming to IEC 60721-3-3 0.35 mm (f = 10...55 Hz) conforming to IEC 60068-2-6 15 gn for 11 ms conforming to IEC 60068-2-27 IP20 (terminals) IP50 (housing) 3 conforming to IEC 60664-1 2.5 kV 4.8 kV 6 kV (in contact) conforming to IEC 61000-4-2 level 3 8 kV (in air) conforming to IEC 61000-4-2 level 3 10 V/m conforming to IEC 61000-4-3 level 3 2 kV conforming to IEC 61000-4-4 level 3 CISPR11 group 1- class A CISPR22 - class A Compliant 0623
Ambient air temperature for storage Ambient air temperature for operation Relative humidity Vibration resistance Shock resistance IP degree of protection Pollution degree Dielectric strength Non-dissipating shock wave Resistance to electrostatic discharge Resistance to electromagnetic fields Resistance to fast transients Disturbance radiated/conducted RoHS EUR status RoHS EUR conformity date
Product data sheet
Technical Description
RE7ML11BU
Function A: Delay on Energisation Description
The timing period T begins on energisation. After timing, the output(s) R close(s). The second output can be either timed or instantaneous.
Function: 1 Output
Function: 2 Outputs
2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.)
Function C: Timing After Opening of Control Contact Description
After power-up and closing of the control contact C, the output R closes. When control contact C re-opens, timing T starts. At the end of the timing period, the output(s) R revert(s) to its/their initial state. The second output can be either timed or instantaneous.
Function: 1 Output
Function: 2 Outputs
2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.)
Function D: Symmetrical Flashing, Start with Output in Rest Position Description
Repetitive cycle with two timing periods T of equal duration, with output(s) R changing state at the end of each timing period T. The second output can be either timed or instantaneous.
Function: 1 Output
Function: 2 Outputs
2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.)
Function Di: Symmetrical Flashing, Start with Output in Operating Position Description
Repetitive cycle with two timing periods T of equal duration, with output(s) R changing state at the end of each timing period T. The second output can be either timed or instantaneous.
Function: 1 Output
Function: 2 Outputs
2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.)
Function H: Timing on Energisation Description
On energisation of the relay, timing period T starts and the output(s) R close(s). At the end of the timing period T, the output(s) R revert(s) to its/their initial state. The second output can be either timed or instantaneous.
Function: 1 Output
Function: 2 Outputs
2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.)
Function W: On-Delay After Opening of Control Contact Description
After power-up and opening of the control contact, the output(s) close(s) for a timing period T. At the end of this timing period the output(s) revert(s) to its/their initial state. The second output can be either timed or instantaneous.
Function: 1 Output
Function: 2 Outputs
2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.).
Legend
Relay de-energised Relay energised Output open Output closed C Control contact G Gate R Relay or solid state output R1/ 2 timed outputs R2 R2 The second output is instantaneous if the right position is selected inst. T Timing period Ta Adjustable On-delay Tr Adjustable Off-delay U Supply
Product data sheet
Dimensions Drawings
RE7ML11BU
Width 22.5 mm Rail Mounting
Screw Fixing
Product data sheet
Connections and Schema
RE7ML11BU
Internal Wiring Diagram
Recommended Application Wiring Diagram Start on Energisation
1 2 3
Supply 1248V 24V
Recommended Application Wiring Diagram Start by External Control
1 2 3
Supply 1248V 24V
Recommended Application Wiring Diagram External Control of Partial Stop
1 2 3
Supply 1248V 24V
Connection of Potentiometer
Connection Precautions
WARNING UNEXPECTED EQUIPMENT OPERATION No galvanic isolation between supply terminals and control inputs. Failure to follow these instructions can result in death, serious injury, or equipment damage.
Product data sheet
Performance Curves
RE7ML11BU
Performance Curves A.C. Load Curve 1
Electrical durability of contacts on resistive loading millions of operating cycles
X Y
Current broken in A Millions of operating cycles
A.C. Load Curve 2
Reduction factor k for inductive loads (applies to values taken from durability curve 1).
X Y
Power factor on breaking (cos ) Reduction factor k
Example: An LC1-F185 contactor supplied with 115 V/50 Hz for a consumption of 55 VA or a current consumption equal to 0.1 A and cos = 0.3. For 0.1 A, curve 1 indicates a durability of approximately 1.5 million operating cycles. As the load is inductive, it is necessary to apply a reduction coefficient k to this number of cycles as indicated by curve 2. For cos = 0.3: k = 0.6 The electrical durability therefore 6 becomes:1.5 10 operating cycles x 0.6 = 900 000 operating cycles.
D. C. Load Limit Curve
X Y 1 2 3
Current in A Voltage in V L/R = 20ms L/R with load protection diode Resistive load
