HyperMesh 11.

0 Tutorials
Samcef Solver Interface
Altair Engineering Contact Information
Web site www.altair.com
FTP site Address: ftp.altair.com or ftp2.altair.com or http://ftp.altair.com/ftp
Login: ftp
Password: <your e-mail address>

Location Telephone e-mail
North America 248.614.2425 [email protected]
China 86.400.619.6186. [email protected]
France 33.1.4133.0992 [email protected]
Germany 49.7031.6208.22 [email protected]
India 91.80.6629.4500
1800.425.0234 (toll
free)
[email protected]
Italy 39.800.905.595 [email protected]
J apan 81.3.5396.2881 [email protected]
Korea 82.70.4050.9200 [email protected]
Scandinavia 46.46.286.2052 [email protected]
United Kingdom 01926 .468.600 [email protected]
Brazil 55.11.3384.0414 [email protected]
Australia 61.3.9016.9042 [email protected]
New Zealand 64.9.413.7981 [email protected]
The following countries have distributors for Altair Engineering:
Asia Pacific: Indonesia, Malaysia, Singapore, Taiwan, Thailand
Europe: Czech Republic, Hungary, Poland, Romania, Spain, Turkey.
2011 Altair Engineering, Inc. All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated to another language without the written permission of Altair
Engineering, Inc. To obtain this permission, write to the attention Altair Engineering legal department at: 1820 E. Big
Beaver, Troy, Michigan, USA, or call +1-248-614-2400.
HyperWorks

11.0 Release Notes

Trademark and Registered Trademark Acknowledgments
Listed below are Altair

HyperWorks

applications. Copyright

Altair Engineering Inc., All Rights Reserved for:

HyperMesh

1990-2011; HyperCrash 2001-2011; OptiStruct

1996-2011; RADIOSS

1986-2011; HyperView

1999-2011; HyperView Player

2001-2011; HyperStudy

1999-2011; HyperGraph

1995-2011; MotionView

1993-
2011; MotionSolve

2002-2011; HyperForm

1998-2011; HyperXtrude

1999-2011; Process Manager 2003-2011;

Templex 1990-2011; Data Manager 2005-2011; MediaView 1999-2011; BatchMesher 2003-2011;
TextView 1996-2011; HyperMath 2007-2011; ScriptView 2007-2011; Manufacturing Solutions 2005-2011;
HyperWeld 2009-2011; HyperMold 2009-2011; solidThinking 1993-2011; solidThinking Inspired 2009-2011;
Durability Director 2009-2011; Suspension Director 2009-2011; AcuSolve 1997-2011; and AcuConsole
2006-2011.
In addition to HyperWorkstrademarks noted above, GridWorks, PBS Gridworks, PBS Professional,
PBS and Portable Batch Systemare trademarks of ALTAIR ENGINEERING INC., as is patent #6,859,792. All
are protected under U.S. and international laws and treaties. All other marks are the property of their respective
owners.
HyperMesh 11.0 Tutorials - Samcef Solver Interface i Altair Engineering
Proprietary Information of Altair Engineering
HyperMesh 11.0 Tutorials - Samcef Solver Interface
........................................................................................................................................... 1 Samcef
........................................................................................................................................... 2
HM-4850: Introduction to Samcef
1 HyperMesh 11.0 Tutorials - Samcef Solver Interface Altair Engineering
Proprietary Information of Altair Engineering
Samcef
The following Samcef tutorials are available:
HM-4850: Introduction to Samcef
Altair Engineering HyperMesh 11.0 Tutorials - Samcef Solver Interface 2
Proprietary Information of Altair Engineering
HM-4850: Introduction to Samcef
In this tutorial, you will learn how to:
Load the SAMCEF user profile
Retrieve the HyperMesh model files for this tutorial
Define the hypothesis on the elements
Create an isotropic material
Create a shell property
Assign the property and the material to the elements
Create loads and the load cases associated with them
Export the model in SAMCEF format
Step 1: Load the SAMCEF user profile
1. Launch HyperMesh or clear the current model.
2. Click on the User Profile icon .
The User Profile dialog displays.
3. Select Samcef from the list of user profiles.
4. Click OK.
Step 2: Retrieve the model file
1. Click on the File - Open Model icon .
2. Browse to the location <installation directory>\tutorials\hm\interfaces\samcef and
select the file Hook.hm.
3. Click Open to open the file.
4. In the toolbar, click on the Shaded Elements and Mesh Lines icon , if this view is not already set.
3 HyperMesh 11.0 Tutorials - Samcef Solver Interface Altair Engineering
Proprietary Information of Altair Engineering
Step 3: Check the hypothesis
1. Click Mesh >Assign >Element Types.
2. Click on the 2D & 3D radio button.
3. In this panel, you have the link between the keyword of HyperMesh (tria3, quad4, ...) and the hypothesis
of SAMCEF. You can change the hypothesis for each element configuration and also update each
element with a different hypothesis.
4. Click return to close the panel.
Step 4: Create the material
Altair Engineering HyperMesh 11.0 Tutorials - Samcef Solver Interface 4
Proprietary Information of Altair Engineering
1. Click the Material Collector toolbar icon .
2. Ensure the create subpanel is selected.
3. Click mat name =and enter steel.
4. Select a color for the material.
5. Click on the card image button and select ISOTROPIC.
You can create different types of elastic material (anisotropic, isotropic, or orthotropic).
6. Click create/edit.
The isotropic card image displays. If a material property in brackets does not have a value below it, it is
turned off. To edit these material properties, click on the property in the brackets you wish to edit and an
entry field appears below it. Click the entry field and enter a value.
7. In the YT field, enter 2.1e5.
8. In the NT field, enter 0.3.
9. In the M field, enter 7.9e-9.
10. Click return twice.
A new material named steel has been created. At any time, the card image for this material can be
modified using the card editor.
Step 5: Create the properties and assign it to the elements
1. Click on the Properties toolbar icon .
2. Ensure that the create subpanel is selected.
3. Click prop name =and enter shell.
4. Select a color for the property.
5. Click type =and select 2d.
6. Click card image =and select SHELLPHP.
7. Click material =and select Steel.
8. Click create/edit.
The SHELLPHP card image displays.
9. Activate the THICK button to display the field. In the THICK field, enter a value of 1.5.
10. Click return.
A new 2D property has been created.
11. In the Properties panel, click the assign subpanel.
5 HyperMesh 11.0 Tutorials - Samcef Solver Interface Altair Engineering
Proprietary Information of Altair Engineering
12. Click the yellow elems button and select by collector. Select the Shell collector.
13. Click property =and select the shell property.
14. Click assign.
The property is now assigned to the elements.
15. Repeat steps 2 - 8 to create another property called solid, the type as 3D and using the card image
SOLIDMAT. You can skip editing the card image for this property, because this 3D property is a dummy
property defined to assign material and an ATT number to the elements.
16. Repeat steps 11 - 14 to assign the elements of the collector solid to the new 3D property called solid.
17. Check that the properties are correctly assigned to the elements by using the By Prop icon
. The elements should have the same color as the properties.
Step 6: Create the load collectors
1. Click on the Load Collectors icon .
2. Ensure that the create subpanel is selected.
3. Click loadcol name =and enter spc.
Altair Engineering HyperMesh 11.0 Tutorials - Samcef Solver Interface 6
Proprietary Information of Altair Engineering
4. Select a color for the load collector.
5. Click the creation method switch and select no card image.
6. Click create. The load collector is created.
7. Click loadcol name =and enter force.
8. Choose a color.
9. Click create.
10. Click return to close the panel.
Step 7: Create the constraints
1. In the Model Browser, expand the Load Collectors folder, right-click on spc and select Make Current.
This sets the spc load collector as the current load collector.
2. Click BCs >Create >Constraints. Make sure the create subpanel is selected.
3. If necessary, use the switch to select nodes in the entity selector button. With the nodes button active,
select the master nodes of the rigid elements, which are defined in the holes of the component solid.
4. Constrain dof1, dof2, dof3, dof4, dof5 and dof6 by checking all of their checkboxes. Set all of them to
7 HyperMesh 11.0 Tutorials - Samcef Solver Interface Altair Engineering
Proprietary Information of Altair Engineering
a value of 0.0
DOFs with a check will be constrained, while DOFs without a check will be free.
DOFs 1, 2 and 3 are x, y, and z translational degrees of freedom.
DOFs 4, 5 and 6 are x, y an z rotational degrees of freedom.
5. Click create to apply these constraints to the selected nodes.
6. Click return to close the panel.
Step 8: Create the forces
1. In the Model Browser, right-click on force and select Make Current. This sets the force load collector
as the current load collector.
2. Click BCs >Create >Forces. Make sure the create subpanel is selected.
3. If necessary, use the switch to select nodes in the entity selector button. With the nodes button active,
select the master nodes of the rigid element.
4. Toggle from local system to global system.
5. Click the vector definition switch and select constant vector.
Altair Engineering HyperMesh 11.0 Tutorials - Samcef Solver Interface 8
Proprietary Information of Altair Engineering
6. Click magnitude =and enter 250.0.
7. Click the vector direction switch below magnitude =and select z-axis from the pop up menu.
8. Click create, and then click return.
Step 9: Create a SAMCEF database
1. Click Setup >Create >Load Steps.
2. Click name =and enter z-force.
3. Click loadcols and select force.
4. Click create and click return to close the panel.
Step 10: Export the file
1. Click the Export icon .
2. In the File field, enter the name of the file as hook.dat.
3. Make sure the template field is set to Samcef and click Export.