Autodesk Inventor 2009 Certication Exam Guide

Autodesk Inventor 2009 Certication Exam Guide

Preparation Guide for Autodesk Inventor 2009 Certied Associate and Autodesk Inventor 2009 Certied Professional Certication Exams
This guide is intended as a resource in your preparation for the exams to become Autodesk-certied. It will help you understand the structure and content of the exams. It also will help you develop a personal strategy to successfully pass the Autodesk Inventor 2009 Certied Associate and Certied Professional exams. The guide includes information on recertication from Autodesk Inventor 2008 Certied User. About Autodesk Professional Certication Autodesk certications are industry-recognized credentials that can help you succeed in your design careerproviding benets to both you and your employer. Autodesk certications are a reliable validation of skills and knowledge, and can lead to accelerated professional development, improved productivity, and enhanced credibility. Getting Certied To earn Autodesk certication, you must pass the required Autodesk certication exams. Stepping through each of these areas will help to ensure your success: Step 1. Choose the certication thats right for you: Choose the level and the Autodesk application that best applies to you. Understand the requirements for the certication you want to earn. Step 2. Assess your readiness and take a practice test: Take an assessment test to assess your knowledge of the product. And then take a practice test for the Professional-level exam to gain experience using the testing system. Step 3. Get the training you need: Use AOTC courseware preparation guides, or take classes at an Autodesk Authorized Training Center (ATC). Step 4. Apply your training and practice your skills: Practice what youve learned to gain experience. Step 5. Take the required exam: Register for your exam at an Autodesk Authorized Certication Center. Autodesk Certication Centers When you have stepped through the process above, you will take your certication exam at an Autodesk Certication Center. All exams are computer-delivered in a proctored environment. Center proctors will seat you and help familiarize you with the testing system. You can nd the locations of Autodesk Certication Centers near you using the Center Search function on http://autodesk.starttest.com.

Contents
Exam Registration, Purchasing, and Scheduling Exam Preparation Your Key to Success Exam Preparation Solutions Certication Preparation Solutions Test-Taking Strategies Autodesk Inventor 2009 Certied Associate Exam Sections and Objectives Autodesk Inventor 2009 Certied Professional Exam Sections and Objectives 3 3 4 5 6

10

| Autodesk Inventor 2009 Certication Exam Guide

Exam Registration, Purchasing, and Scheduling

Information on purchasing and scheduling an Autodesk certication exam can be found at Autodesk Online at http://autodesk.starttest.com. When you participate in the Autodesk Certication Program, you will be asked to create a prole in the Autodesk Online testing system, which includes creating a user name and password. You will be prompted to create this prole the rst time you start a test using the Autodesk Online system. While creating your prole, you will be asked to agree to Autodesks Terms and Conditions.

Preparation Matters Even the most experienced users of Autodesk applications will benet from focusing their study on the objectives outlined in this guide. Studies have shown that candidates who prepare using objectives and a variety of resources score better on certication exams. Solid preparation, including regularly scheduled preparation time, along with your experience can equal success.

During Your Exam While taking the exam, you may not use calculators, books, or other electronic equipment. You may use scratch paper, but it will be collected from you when you nish your test. You may pause the test during delivery, and no time will be lost. The proctor will seat you and step you through the process of starting your test. The proctor also will answer any questions you have about the testing process. The proctor will not answer any questions about test questions.

Exam PreparationYour Key to Success

Autodesk highly recommends using a variety of resources to prepare for certication exams. In all cases, you should start with the exam objectives to determine which tasks will be covered on the exams. Equally as important, actual hands-on experience is required. From there, we recommend that you choose the preparation option that best ts your needs. Details on Autodesk-recommended preparation solutions are available in this guide. During preparation, it is important that you review the exam objectives periodically to make sure that all of the material in the exam is covered in your choice of preparation methods. Please note that some material on the test may not be covered in your choice of preparation materials. This is why it is critical that you refer to the list of exam objectives during your course of study. Exam Objectives Review the exam objectives to see the complete listing of topics for the exam. Use this as your checklist to determine your weaknesses and areas on which you will want to focus more attention in your study and preparation. The exam objectives can be found on the last two pages of this guide. Experience Actual hands-on experience is a critical component in preparing for the exam. Direct application of the skills learned cannot be substituted by any one other learning resource. You must spend time using the product and applying the skills you have learned. Certication exams are looking to measure how well you know how to perform tasks, not how well you memorize features and functions. Wherever possible, we recommend the use of a Practice Exam to prepare for testing. This will allow you to become familiar with the exam testing interface and system.

| Autodesk Inventor 2009 Certication Exam Guide

Exam Preparation Solutions

Autodesk Inventor 2009 Certied Associate Exam Summary Information The Autodesk Inventor 2009 Certied Associate Exam is an on-line examination consisting of 30 questions that assess your knowledge of the tools, features, and common tasks in Autodesk Inventor 2009. Question types include multiple choice, matching, and point-and-click (hotspot). The required passing score is 73%. The exam has a one-hour time limit. (In some countries, the time limit may be extended.) At the conclusion of the exam, you will receive a comprehensive score report that includes summary information on the questions you missed and where you can nd information on that area in the corresponding Autodesk Official Training Courseware (AOTC). Your score report remains available in your prole in the Autodesk Online system at http://autodesk.starttest.com. These results are condential. Autodesk Inventor 2009 Certied Professional Exam Summary Information The Autodesk Inventor 2009 Certied Professional Exam is a performance-based test. Performance-based testing is dened as testing by doing. That means that rather than answer questions about how you might accomplish a task, you actually perform the task. Performance-based testing is widely accepted as a better way of ensuring you have the skills needed for the application, rather than just the ability to recall information. The Autodesk Inventor 2009 Certied Professional Exam is comprised of 20 questions. The exam requires you to use Autodesk Inventor 2009 to perform a task, and then answer a question about the task. The questions will ask you to input a numeric or text answer. More information on these types of questions, along with sample questions, can be found in this guide. The required passing score is 75%. To earn the credential of Autodesk Inventor Certied Professional, you also must pass the Autodesk Inventor Certied Associate Exam. You can pass the exams in any order. The exam has a 90-minute time limit. (In some countries, the time limit may be extended.) At the conclusion of the exam, you will receive a comprehensive score report that includes summary information on the questions you missed and where you can nd information on that area in the corresponding Autodesk Official Training Courseware (AOTC). Your score report remains available in your prole in the Autodesk Online system at http://autodesk.starttest.com. These results are condential. Recertication from Autodesk Inventor 2008 Certied User If you are an Autodesk Inventor 2008 Certied User, you can update your certication to Autodesk Inventor 2009 Certied Professional by passing the Autodesk Inventor 2009 Certied Associate Exam as illustrated below. This applies only to recertication from 2008 to 2009. If you are certied on an earlier release, you will have to take both the Certied Associate and Certied Professional exams to earn 2009 Certied Professional certication.

Recommended Experience Levels for Autodesk Inventor 2009 Certication Exams Experience using an Autodesk application is a critical component of success in earning certication. Autodesk recommends a minimum level of experience using the application before attempting the exam. Note that even with the recommended level of experience, you should still use the exam objectives as a basis for your preparation. Even the most knowledgeable and experienced users of Autodesk applications will need to focus their study specically on the exam objectives. 2009 Certied Associate Exam AOTC Essentials course (or equivalent) plus 100 hours of hands-on application. 2009 Certied Professional Exam AOTC Essentials course (or equivalent) plus 400 hours of hands-on application.

Looking to become an Autodesk Inventor 2009 Certied Professional? Remember, you must also pass the Autodesk Inventor 2009 Certied Associate Exam. Take them in any order.

You are Autodesk Inventor 2008 Certied User

You must pass Autodesk Inventor 2009 Certied Associate

You earn Autodesk Inventor 2009 Certied Professional

| Autodesk Inventor 2009 Certication Exam Guide

Certication Preparation Solutions

Autodesk Assessment Tests Autodesk assessment tests will help determine your general knowledge of the Autodesk application on which you are seeking certication. This will identify areas of knowledge that you should develop in order to prepare for the certication exam. 2009 assessment tests consist of 50 to 60 questions that assess your knowledge of the tools, features, and common tasks in Autodesk Inventor 2009. At the completion of an Autodesk assessment test, you will receive a comprehensive score report that details the number of questions you missed and provides feedback on improving your performance in those areas. You also will be able to review the items you missed and their correct answers. Autodesk Official Training Courseware (AOTC) Autodesk publishes dozens of courseware titles every year designed to help users at all levels of expertise improve their productivity with Autodesk software. Courseware from Autodesk is the preferred classroom training material for Autodesk Authorized Training Centers. The same training materials are well-suited for self-paced, standalone learning. Students simulate real-world projects and work through hands-on, job-related exercises. Most titles include a trial version of the software. The objectives in the Autodesk Certied Associate and Professional exams come directly from AOTC courseware. If you will be taking a Professional-level exam, the test questions will use the drawings that are made available to you with the corresponding AOTC courseware. AOTC courseware can be purchased from the Autodesk Store at http://store.autodesk.com (select Training Tools, and then Autodesk Courseware). The recommended AOTC courseware for the Associate and Professional exams is Autodesk Inventor 2009: Essentials AOTC. You can purchase the courseware at http://store.autodesk.com or contact your local ATC. ATC Instructor-Led Courses Every day, thousands of customers are taught how to realize their ideas, faster, with Autodesk software. You can perform smarter and better with Autodesk software products when you turn to an Authorized Training Center. An ATC is your best source for Autodesk-authorized classes, tailored to meet the needs and challenges facing todays design professionals, and to help you prepare for your Autodesk certication exams. The Autodesk Authorized Training Center (ATC) program is a global network of professional training providers offering a broad range of learning resources. In many areas, you can earn continuing education credits while building your toolset. Visit the online ATC locator at http://www.autodesk.com/atc. With great instructors, quiet classrooms, and personally dedicated computers, ATC sites get you up to speed quicklyusing sample projects and exercises that emphasize realworld, practical applications. Its the best way to learn how to use Autodesk products and solutions. ATC sites offer all the courses you need in one place. Instructors cover a wide range of Autodesk products, including the latest software releases, for users at all levels.

Need the Autodesk Application? If you do not have the required Autodesk application on your computer, you will not be able to take the Professional-level practice test from that computer. We recommend you contact an Autodesk Certication Center in your area to schedule a Professional-level practice test where the application is available. In some cases, Autodesk makes available evaluation copies of Autodesk applications, and these can be downloaded and used to prepare for the exam. For information on which products may be available for evaluation, visit the Autodesk product pages at http://www.autodesk.com/ products, and click Alphabetical Product List to see the listing of products with Free Trial available. Be sure to read the Terms and Conditions for using these trial products.

Trial Versions Most AOTC courseware guides come with a trial version of the application. You can use this version to practice, and to take a Professional-level practice test. Find more information at http://store.autodesk.com.

| Autodesk Inventor 2009 Certication Exam Guide

Autodesk Inventor 2009 Professional-level Practice Tests In order to allow you to gain experience with the Professional-level test and the testing system, Autodesk has developed a practice test that simulates the actual 2009 Certied Professional certication exam. It is a performance-based exam, with the same number of questions as the actual exam. It requires the use of the specic Autodesk application in order to successfully answer the questions. This test can be taken in an Autodesk Certication Center or from your own computer. Other Learning Resources Other learning resources available from Autodesk include online tutorials, how-to articles, and tips on using features in Autodesk applications. For information on access to these materials, visit the Autodesk product pages at http://www.autodesk.com/products, and select the Autodesk application on which you are seeking certication. Each product page contains links to other preparation products that can add to your knowledge.

Autodesk Communities Autodesk Communities can be a great resource for seeking advice on specic exam objectives. These online discussion forums allow you to interact with your peers and ask technical questions. You can nd a list of Autodesk Communities at http://www.autodesk.com (select Communities).

Test-Taking Strategies
Each time you take a test, whether it is an assessment test, practice test, or the certication exam, you will benet from using proven test-taking strategies to increase your odds of success. Some of these strategies are general, but some are very specic to the type of exam you may be taking. Time Management Because Autodesk certication exams are timed, management of time during testing is an integral part of a successful outcome. Autodesk recommends that you use a strategy that maximizes the time available so that you will have time to answer each exam question. The Autodesk Online test system allows you to mark questions for review and return to them later. This allows you to work through the test questions that are easy or quick for you and mark the more difficult questions to return to later if time permits. It is important to avoid becoming caught up in one specic exam question and wasting time. Thoroughly Read Exam Questions and Instructions Autodesk exams are testing specic objectives, so it is critical that you understand the questions before you answer them. Additionally, before each test, you are presented with a tutorial. This tutorial contains information on using the Autodesk Online testing system as well as critical information such as location of les, instructions for answering questions, and general test information. Associate-Level Exam Question Types Associate-level exams are made up of a variety of question types that are detailed below. During the tutorial before your test, you will be given information on these question types as well as the opportunity to practice answering them. One-best-answer multiple choiceThis is the traditional, most familiar type of test question. It requires you to select the single best answer. Select all that applyThese questions consist of a question followed by multiple responses in which you select all options that apply. Point-and-clickThese questions consist of a question followed by a graphic. The correct answer is selected by clicking on the correct area of the graphic. Matching formatThese questions consist of a list of statements in the left column that are matched to the correct statement in the column on the right. To match statements, you click a statement in the list on the left and drag the statement to the corresponding statement on the right column.

Test-Taking Strategies for Beginners Good general test-taking strategies that may help you perform better include: Be sure you are rested and do not test while hungry. If you are travelling to a Certication Center, leave early enough so you will not feel rushed. Breathe and relax during your test. Take a break if you need to. The system will allow you to pause without losing any time. Do a short, focused review before the test.

| Autodesk Inventor 2009 Certication Exam Guide

Professional-Level Exam Question Types Professional-level exam questions are performance-based and require the use of the Autodesk application to derive the correct answer. Each question requires you to use the Autodesk application to create or modify a data le, and then to type your answer into an input box on the screen. The answer you enter will either be a text entry or a numeric value. If you are entering a word, phrase, or numeric value, enter the answer exactly as it appears in your data le or in the Autodesk application. If you are entering a numeric value, you may copy and paste from the application. If you are testing in a country that uses a comma in numeric measurements, the testing system will accept the comma as well as the decimal point. Entering a Text Answer This type of question presents a scenario that requires you to open a data le and perform a common task. For a question that requires a text answer, enter the text exactly as it appears on the screen. Example:

Additional Tips for Professional-Level Exams Read the question carefully so that you fully understand the performance task. The exam has a time limit. If you encounter a question you cannot answer in a reasonable amount of time, use the Save As feature to save a copy of the data le, and mark the question for review. When you review the question, open your copy of the data le and complete the performance task. After you verify that you have entered the answer correctly, unmark the question so it no longer appears as marked for review. Use the Review screen to ensure you have reviewed all the questions you may have marked for review. When you are condent that you have answered all questions, end the examination to submit your answers for scoring. You will receive a score report once you have submitted your answers.

1.

Open the le named Displaying Objects.dwg. Use the zoom and pan features to display room number 82007. This room is named: When you open the data le and then zoom and pan to display this portion of the drawing, the name of the room appears as DATA RM., as upper case letters with a period at the end of the name. In this case, you would enter the answer as: DATA RM.

TIP

| Autodesk Inventor 2009 Certication Exam Guide

Entering a Numeric Answer This type of question presents a scenario that requires you to open a data le, modify the object, and identify a value. For a question that requires a numeric answer, enter the value exactly as it appears on the screen. Example:

Open le Control-Valve.ipt. Follow these steps: 1. 2. Create an offset work plane 10 millimeters from the XY origin plane. Create the slot feature as shown. The slot is centered in middle of the existing features. What is the parts volume in cubic millimeters? When you open the data le, modify the part, and then determine the volume. The value displayed is 13033.216. The value displays to 3 places to the right of the decimal. In this case, you would enter the answer as: 13033.216

TIP

| Autodesk Inventor 2009 Certication Exam Guide

Autodesk Inventor 2009 Certied Associate Exam Sections and Objectives

The Autodesk Inventor 2009 Certied Associate Examination includes 10 sections and 30 questions. Each section covers specic objectives. The recommended AOTC courseware for this exam is Autodesk Inventor 2009: Essentials AOTC. You can purchase this guide at http://store.autodesk.com or from your local ATC. Schools can also purchase from an Autodesk Academic Value Added Reseller at http://www.autodesk.com/education and select Locate a Reseller. Section Basic Sketching Techniques Basic Shape Design Questions Exam Objectives 2 5 Apply geometric constraints to sketch geometry. Use additional options when applying dimensions. Use the Extrude tool to create extruded features. Use the Operation and Extent termination options when adding 3D features. Describe sketch linetypes and their behavior. Create and modify parameters and equations. Use the Sweep tool to create sweep features that follow 2D and 3D paths. Dene a hole feature. Use the Rectangular Pattern tool to create rectangular patterns. Use the Shell tool to create shelled features. Create a project le for a single user. AOTC Chapter Chapter 2: Basic Sketching Techniques Chapter 3: Basic Shape Design

Detailed Shape Design

Chapter 4: Detailed Shape Design

Assembly Design Overview Placing, Creating, and Constraining

1 3

Chapter 5: Assembly Design Overview

Describe how assembly constraints affect individual parts in Chapter 6: the assembly. Placing, Creating, and Describe the Content Center consumer environment and what Constraining Components Content Center consumers can do. Create components in an assembly. Use the Selection Priority and Component Selection tools to simplify and enhance component selection. Calculate physical properties. Describe presentation les and their role in creating exploded drawing views. Edit orthographic views and describe how other projected views may be affected. Edit section views. Crop a drawing view using a sketched boundary shape. Move, align, and edit drawing views. Describe the use and function of retrieved dimensions. Create and edit hole tables. Create centerlines and center marks. Add and edit revision tags. Describe the bill of materials and its uses. Use the Edit Parts List dialog box to modify your parts lists. List the steps required to manually place and edit balloons. Describe styles and their role in drawing standards. Identify how layers can be used to logically organize geometry in drawings. Chapter 7: Interacting with an Assembly

Interacting with an Assembly

Basic View Creation

Chapter 8: Basic View Creation

Dimensions, Annotations, and Tables Annotating Assembly Drawings Drawing Standards and Resources

Chapter 9: Dimensions, Annotations, and Tables Chapter 10: Annotating Assembly Drawings Chapter 11: Drawing Standards and Resources

2 3

| Autodesk Inventor 2009 Certication Exam Guide

Autodesk Inventor 2009 Certied Professional Exam Sections and Objectives

The Autodesk Inventor 2009 Certied Professional Examination includes 9 sections and 20 questions. Each section covers specic objectives. You must also pass the Autodesk Inventor 2009 Certied Associate exam to earn the Autodesk Inventor 2009 Certied Professional title. The recommended AOTC courseware for this exam is Autodesk Inventor 2009: Essentials AOTC. You can purchase this guide at http://store.autodesk.com or from your local ATC. Schools can also purchase from an Autodesk Academic Value Added Reseller at http://www.autodesk.com/education and select Locate a Reseller. Section Basic Sketching Techniques Basic Shape Design Questions Exam Objectives 2 Explain how to display sketch degrees of freedom and how they can assist in creating fully constrained sketches. Describe best practices for dimensioning your sketch. Orient sketch planes based on other planes or faces. Orient sketch planes based on other planes or faces. Project part edges onto a sketch plane. Utilize the 3D Grips tool and adjust the geometry a visual distance, a numeric distance, or to a specic geometric location. Use the Work Point tool to create work points on a part. State the guidelines for creating sweeps. State the guidelines for creating chamfers and llets. Use the Thread tool to create external thread features. Use the Mirror tool to create symmetric features. Use the Mirror tool to create symmetric features. Use the Shell tool to create shelled features. State some guidelines for proper constraining techniques. State some guidelines for in-place component design. Animate components in an assembly by driving constraints. AOTC Chapter Chapter 2: Basic Sketching Techniques Chapter 3: Basic Shape Design

Detailed Shape Design

Chapter 4: Detailed Shape Design

Placing, Creating, and Constraining Components Interacting with an Assembly Basic View Creation Dimensions, Annotations, and Tables Annotating Assembly Drawings Drawing Standards and Resources

Chapter 6: Placing, Creating, and Constraining Components Chapter 7: Interacting with an Assembly Chapter 8: Basic View Creation Chapter 9: Dimensions, Annotations, and Tables Chapter 10: Annotating Assembly Drawings

1 1

Control hatch and sectioning in section views. Place ordinate dimensions on drawing views.

1 1

Use the Edit Parts List dialog box to modify your parts lists.

Identify how layers can be used to logically organize geometry Chapter 11: Drawing in drawings. Standards and Resources

http://www.autodesk.com/certication email: [email protected]

On the cover: Photo courtesy of the S/L/A/M Collaborative. Woodruff/Brown Architectural Photography Autodesk and Autodesk Inventor are registered trademarks or trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. 2008 Autodesk, Inc. All rights reserved.

10

| Autodesk Inventor 2009 Certication Exam Guide