Scribd Logo
Upload

Welcome to Scribd!

  • 452 views

    RCC Bore Cast in Situ Pile Capacity Design Excel

    Uploaded by

    Mahibul Hasan
    The document provides inputs and calculations to determine the capacity of a bore cast pile. It includes the pile diameter, effective length, soil properties from SPT tests, and calculations of net end bearing capacity, skin friction, and total pile capacity. The total pile capacity is determined to be 185.91 kips (92.96 tons) with a 10% reduction for negative skin friction effects.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    RCC Bore Cast in Situ Pile Capacity Design Excel

    Uploaded by

    Mahibul Hasan
    452 views8 pages
    The document provides inputs and calculations to determine the capacity of a bore cast pile. It includes the pile diameter, effective length, soil properties from SPT tests, and calculations of net end bearing capacity, skin friction, and total pile capacity. The total pile capacity is determined to be 185.91 kips (92.96 tons) with a 10% reduction for negative skin friction effects.

    Original Title

    122398288 Rcc Bore Cast in Situ Pile Capacity Design Excel

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides inputs and calculations to determine the capacity of a bore cast pile. It includes the pile diameter, effective length, soil properties from SPT tests, and calculations of net end bearing capacity, skin friction, and total pile capacity. The total pile capacity is determined to be 185.91 kips (92.96 tons) with a 10% reduction for negative skin friction effects.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    452 views8 pages

    RCC Bore Cast in Situ Pile Capacity Design Excel

    Uploaded by

    Mahibul Hasan
    The document provides inputs and calculations to determine the capacity of a bore cast pile. It includes the pile diameter, effective length, soil properties from SPT tests, and calculations of net end bearing capacity, skin friction, and total pile capacity. The total pile capacity is determined to be 185.91 kips (92.96 tons) with a 10% reduction for negative skin friction effects.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 8

    PILE CAPACITY DETERMINATION FOR BORE CAST

    INPUTS
    Pile Dia (D) Pile effective length End pile point SPT value (corrected) Average SPT value along pile shaft End pile point Cohesion Averrage cohesion along pile shaft Unit weight Pick pressure point (start) Water pressure at pick point Grain Size distribution: Sand Silt Clay Friction capacity factor () 20 in 33 ft 32.5 13.56 0.101 kip/ft2 0.020 kip/ft2 90.500 lb/ft3 15 0.000 kip/ft2 84.00 % 16.00 % 0.00 % 0.239629557 Cohesion Dry density Unit Weight SPT value (>15) Corrected SPT value Plasticity Index (LL-PL) Cohesion (Bottom end) Avrg. Cohesion (shaft)
    0.6 0.5 Friction capacity factor 0.4 0.3 0.2 0.1 0 Series1 0 0.5 10 0.24

    UNIT CONVERSION

    RESULTS
    Net end bearing = Net skin friction= Total pile capacity= 10% reduction due to negetive screen friction 83.66 ton 174.00 11.91 185.91 92.96 kip kip kip ton

    FOR BORE CAST IN-SITU


    0.0100 kg/cm2 0.0209 kip/ft2 Layer depth 18 Cohesion 2.64 Total depth 35.5 Average cohesion 2.62971831 PASS? 7 2.59 3 2.6 4 2.64 3.5 2.67

    CONVERSION
    0.0130 KN/m2 0.0009 kip/ft2 1.250 gm/cc 77.9027 lb/ft3 41 28 22 0.3439 kip/ft2 0.2299 kip/ft2

    DESIGN BY: Abid Moin Uddin EMAIL: [email protected]

    10 0.24

    20 0.178

    30 0.157

    40 0.14

    50 0.125

    60 0.12

    70 0.117

    80 0.1125

    Pile embedment length (metres)

    a. End bearing: 1. Sandy soil (q) q End bearing capacity 2. Clay soil End bearing capacity b. Skin friction: 1. Sandy soil 2. Clay soil 10.91544 Kip 23.29834 Kip 8 514.8 260 Kip 189.0778 Kip 0.9072 0.659736 Kip 15 * D= 25 260

    Net end bearing = Net skin friction= Total pile capacity=

    174.0043 Kip 11.90607 Kip 185.9104 Kip 84.50473 Ton

    10% reduction due to negetive screen friction

    76.05426 Ton

    PILE EFFECTIVE LENGTH Depth(metres) 0 10 20 30 40 2.2625 Kip/ft 50 60 70 80 2.2625 Kip/ft

    10.06 m 0.5 0.24 0.178 0.157 0.14 0.125 0.12 0.117 0.1125

    0.23963

    You might also like