Morse Archcatalog

NO.
26
ARCHITECTURAL CATALOG
On-Time Delivery Knowledgeable Staff Extensive Selection Custom Extrusions
1.800.325.7513
www.morseindustries.com
TABLE OF CONTENTS
INTRODUCTION
History of Excellence On-Time Shipping In-House Design & Engineering Just In Time Inventory Your Partner In China & Beyond Value Added Custom Fabrication, Assembly & Packaging Knowledgeable Service Product Variety Consistent Quality Distributor Program
INTRODUCTION
FRAMELESS SHOWER PRODUCTS
U-Channels, Headers & Brass Connectors Hinges Glass Clamps Towel Bars & Door Pulls PVC Seals & Edge Wipes
RAILING SYSTEMS
PanelGrip System GlassWedge System Glass Railing Components Top Rails Mitered Corners End Caps Connector Sleeves Vinyl Insert/Setting Block Standoff Braket, Wall Mount & Drain Block Aluminum Base Shoes Base Section Cladding Cladding End Caps Glass Grips & Clamps Tubing & Flush End Caps Handrail Brackets Flush Fittings Flanges Custom Mitered Corners
11
ARCHITECTURAL TRIMS & EXTRUSIONS
J-Moldings U-Channels Commercial Channels, Angles & Flat Bar Glass Wall Partition Channels Aluminum Angles Aluminum Flat Bar Counter Partition System
39
SLIDE TRACK SYSTEMS
49
Smart Lock System Economy System Standard System
FIXTURE PRODUCTS / MISCELLANEOUS TRIMS
55
Price Tag Moldings Half Ovals Edge Moldings T Moldings Toilet Partitions & Brackets Continuous Hinges Stamped Hinges
CUSTOM CAPABILITIES
Aluminum Extrusions Vinyl Extrusions Stainless Cast Fittings Stainless & Aluminum Fabrication Injection Molded Nylon Hardware CNC Aluminum Fabrication
63
REFERENCE MATERIALS
67
Shipping & Claims Terms & Conditions Shower Door Hinge Warranty Decimal & Equivalents
tel 1.800.325.7513
fax 1.800.411.8226
INTRODUCTION
INTRODUCTION
2 History of Excellence
For nearly 30 years, Morse Industries has partnered with customers to build a company driven by customer needs. We work closely with our customers to fulfill requests in a timely and efficient manner while providing expert advice on our products and applications. Our goal is simple: To exceed your expectations by providing you the highest quality products available with both convenient and reliable service.
On-Time Shipping
Providing products when you expect them is the cornerstone of our business. Orders are tracked by date through all stages of the process and a double-check system is in place to ensure that your order is shipped on the day we promise. Morse also delivers on our own trucks within service areas. That means we take responsibility from our warehouse to your door. We take great care so you receive your orders in perfect condition. Each item in your order is individually poly-sleeved and packaged with paper interleaving to protect metal finishes. Items are usually boxed in quantities of 50 pieces, shrink-wrapped and placed on pallets to prevent damage.
In House Design and Engineering
Our in house design and engineering staff can take your concept and make it a reality. Whether its an established design, or an entirely new product, we work with our customers through every step of the product design process to ensure the highest quality end product. Using industry standard software such as AutoCad and SolidWorks ensures accurate electronic conversions of product drawings for production.
Just in Time Inventory
Morse has three convenient distribution facilities across the United States and can provide a tailored, ongoing inventory program for your company. We save you inventory holding costs by stocking your custom or standard stock items in one of our warehouses for immediate release as needed. Stocked items are available for same-day shipping.
tel 1.800.325.7513
fax 1.800.411.8226
INTRODUCTION
Your Partner in China and Beyond
Morse has vendor resources across the globe allowing us to bring you the highest quality products at the best prices. We have staff members employed in China with extensive backgrounds in engineering, quality control, and sourcing. Because our staff are Chinese nationals, they understand the intricacies of doing business in a foreign country. Our employees act as your liaison, overseeing products through all stages of production, quality control, and finally shipment.
Value Added Custom Fabrication, Assembly and Packaging
Let us save you money by eliminating the costly labor necessary when doing your own fabrication. Our vendors have capabilities ranging from punching, slotting, drilling, CNC, welding, bending and more. Morse can be your one stop shop for fabrication, assembly and packaging through our Value Added program. We will make the product, fabricate it to your specifications, source any additional items needed for the kit, assemble the contents and package it in such a way that you need only ship it to your customers. Our staff is there to assist you every step of the way.
Its great to find a company that treats our business as a partnership. Morse Industries does whatever it takes to make us happy and works with us to improve our business. Glass Wholesalers, Inc. Houston TX
Knowledgeable Service
Our highly trained employees know the products and consult with you one-on-one to be sure you are getting what you need. If you are interested in railing, we also have railing specialists on staff to help you with the process. If there ever is a problem, our team members are empowered to quickly work with you to agree on a satisfactory solution. Our business is focused on making your job easier.
Product Variety
Morse stocks a wide variety of popular products to help make your purchasing process simple. In addition to the products listed in these pages, Morse Industries can provide custom products to meet your needs. Our staff will assist in taking your order from design, to construction of dies and tooling, through production, fabrication, finishing and then follow through with the order until it reaches your receiving door.
tel 1.800.325.7513
fax 1.800.411.8226
INTRODUCTION
4
Consistent Quality
Our customers expect consistent, high-quality products every time they order. Morse Industries has a quality assurance system in place that ensures your orders match the approved drawings and the specified finish before they are shipped to your facility. Therefore, you can rely on Morse Industries to provide the product you ordered on the delivery date promised by our customer support specialists.
Distributor Program
Our distributors are partners for our success. The Morse Industries Distributor Program consists of selling materials and a lead support program to help distributors sell more effectively. If you are interested in selling Morse products, contact us for a free information packet.
Visit MorseIndustries.com for:

Updated catalog and product information Recent Morse Industries news and events Product specifications and CAD drawings How-to articles and best practices documents
tel 1.800.325.7513
fax 1.800.411.8226
FRAMELESS SHOWER
FRAMELESS SHOWER
U-Channels, Headers & Brass Connectors Hinges Glass Clamps Towel Bars & Door Pulls PVC Seals & Edge Wipes
1.800.325.7513 www.morseindustries.com
FRAMELESS SHOWER
FRAMELESS SHOWER U-CHANNELS, HEADERS ANd cONNEcTORS

Shower U-Channels
U-Channels are typically used for fixed panel frameless shower systems. Available in polished bright chrome, polished bright gold, brushed nickel, oil rub bronze, and oil rub bronze metallic finishes in 8 and 12 lengths. Other finishes and lengths may also be available. 50 pieces per case, individually plastic sleeved for protection.
.75 .375 .563 A52-0219 for 3/8 glass .375 .688 A52-0220 for 1/2 glass .563 A52-0221 for 3/8 glass
.75
.688 A52-0222 for 1/2 glass
Some finishes not available on all products. Please inquire for availablity.
Shower Headers, Snap In Filler & Flexible Vinyl Insert

Both header and snap in filler insert are available in polished bright chrome, brushed nickel, and oil rub bronze. Header is available in 98 and 12 lengths. Snap in filler insert is available in 3 and 6 lengths. Other finishes and lengths may also be special ordered. Clear flexible vinyl insert is sold by the foot.
.565
.750 1.250 .56
.522
NEW
.50
NEW
A42-7479 Snap In Filler Insert
1.080 A42-7469 Header
V11-0030 Clear Vinyl Insert for 3/8 glass
Brass Connectors
For use with shower header.
B42-9796 Brass Wall Mount Anchor Set
B42-9797 90 Brass Corner Mount
B42-9798 135 Brass Corner Mount
B42-9799 Adjustable Brass Corner Mount
tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com
FRAMELESS SHOWER HINGES

Morse Industries shower hinges are made of solid brass with all moving parts (pins and springs) in stainless steel. A removable protective insert covers the interior rounded (mouse ear) portion of the hinge. This helps keep the glass from slipping off the hinge and protects it from metal contact, extending the life of both the hinge and the glass. Hinges are made to accomodate 3/8 to 1/2 (10 to 12 millimeter) glass, are self centering, and contain a 0 return with reversible 5 pin (preset 5 pins also available). See page 70 for warranty details.
FRAMELESS SHOWER
Paladia Series Hinges

Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.
Part# Description
C50-0001 C50-0002 C50-0003
Beveled Edge Wall Mount Full Back Plate Hinge Beveled Edge Wall Mount Offset Back Plate Hinge Beveled Edge 180 Glass-to-Glass Hinge
Each hinge includes gaskets, cutting template and fasteners
C50-0001
C50-0002
C50-0003
Roma Series Hinges

Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.
Part# Description
C50-0004 C50-0005 C50-0006
Square Edge Wall Mount Full Back Plate Hinge Square Edge Wall Mount Offset Back Plate Hinge Square Edge 180 Glass-to-Glass Hinge
Each hinge includes gaskets, cutting template and fasteners
C50-0004 Maximum Capacity* 2 Hinges 3 Hinges
C50-0005 3/8 Glass (10 mm) Weight Door Width 80 lbs (36 kg) 28 (711 mm) 120 lbs (54 kg) 32 (813 mm)
C50-0006 1/2 Glass (12 mm) Weight Door Width 80 lbs (36 kg) 28 (711 mm) 120 lbs (54 kg) 32 (813mm)
*Do not exceed maximum door weight or width when determining hinge quantity
FRAMELESS SHOWER
FRAMELESS SHOWER GLASS CLAMPS

Morse Industries shower glass clamps are made of solid brass in a variety of finishes and can accomodate 3/8 to 1/2 (10 to 12 millimeter) glass. Used for securing fixed panels in a shower enclosure application, they may be attached to curb, ceiling or wall. Clear silicone can be added to provide a clean, water tight appearance.
Traditional Glass Clamps

Available in Brushed Nickel, Polished Bright Chrome and Oil Rubbed Bronze. Hole diameter required: 5/8 (16mm), 3/4 (19mm).
Part# Description Measurement
C50-0031 C50-0032
Traditional Style Fixed Panel Clamp Oversized Fixed Panel Clamp
1 3/4 x 1 3/4 1 3/4 x 1 15/16
Each clamp includes neoprene gaskets and fasteners
NEW
NEW
C50-0031
C50-0032
Note: The stud that goes through the hole made in the glass is positioned further from the edge of the glass than that of the standard clamp. This makes the Oversized Clamp the preferred clamps of most temperers for 1/3 (12mm) glass.
Heavy Duty Hole-In-Glass Style Clamps

Available in Brushed Nickel, Polished Bright Chrome and Oil Rubbed Bronze. Hole diameter required: 3/4 (19mm).
C50-0033 C50-0034
Square Edge - Hole in Glass Wall Mount Clamp Beveled Edge - Hole in Glass Wall Mount Clamp
2 x 2 2 x 2
Each clamp includes neoprene gaskets and fasteners
NEW
NEW
C50-0033
C50-0034
FRAMELESS SHOWER TOWEL BARS ANd dOOR PuLLS

Morse Industries shower towel bars and pulls are constructed of 3/4 (19mm) brass tubing and are available in finishes matching our frameless shower hinge collection. 1 (25mm) is also available via special order.
FRAMELESS SHOWER
Towel Bar with Shower Door Pull Knob

Includes both decorative metal washers as well as interior plastic washers to protect glass against metal contact. Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.
Part# Description
C60-0020 C60-0021 C60-0022
18 Single Towel Bar with Pull Knob (with removable washers) 24 Single Towel Bar with Pull Knob (with removable washers) 26 Single Towel Bar with Pull Knob (with removable washers)
NEW
Each handle includes an Allen wrench
Double Towel Bar

Includes both decorative metal washers as well as interior plastic washers to protect glass against metal contact. Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.
Part# Description
C60-0030 C60-0031 C60-0032
18 Double Towel Bar (with removable washers) 24 Double Towel Bar (with removable washers) 26 Double Towel Bar (with removable washers)

NEW
Back-to-Back Shower Door Pulls

Includes plastic interior washers to protect glass against metal contact. Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.
Part# Description
C60-0006 C60-0008
6 Back-to-Back Shower Door Pull (no washer) 8 Back-to-Back Shower Door Pull (no washer)
FRAMELESS SHOWER
FRAMELESS SHOWER PVc SEALS AND EDGE WIPES

Morse Industries offers a variety of PVC seals and edge wipes for your shower installation needs. All profiles are available for both 3/8 and 1/2 glass in 98 lengths.
Clear Multi Purpose H Wipe

Part# Description
V11-001 V11-002
Multi Purpose H Wipe for 3/8 Glass (98) Multi Purpose H Wipe for 1/2 Glass (98)
NEW
Clear PVC Dual Seal and Wipe

Part# Description
V11-0010 V11-0011
Dual Seal and Wipe for 3/8 Glass (98) Dual Seal and Wipe for 1/2 Glass (98)
NEW
Clear PVC Co-Extruded Bottom Wipe with Drip Rail

Part# Description
V11-0020 V11-0021
Co-Extruded Bottom Wipe with Drip Rail for 3/8 Glass (98) Co-Extruded Bottom Wipe with Drip Rail for 1/2 Glass (98)
NEW
10
RAILING SYSTEMS
RAILING SYSTEMS PanelGrip System GlassWedge System Glass Railing Components Top Rails Mitered Corners End Caps Connector Sleeves Vinyl Insert/ Setting Block
We work with Morse Industries because they are always the friendliest. When we have questions, they nd answers. Its just great overall service.
Beehive Glass Salt Lake City
Standoff Bracket, Wall Mount & Drain Block Aluminum Base Shoes Base Section Cladding Cladding End Caps Glass Grips & Clamps Tubing & Flush End Caps Handrail Brackets Flush Fittings Flanges Custom Mitered Corners
*Visit www.morseindustries.com for downloadable reference documents.
11
RAILING SYSTEMS
PanelGrip Dry Glaze Glass Railing System

Patent Pending
The latest development in Glass Railing technology, PanelGrip facilitates the quick assembly of structural glass railing without messy fillers or special tools with significant savings in labor and shipping costs.
Easy to Install
1. Place Plastic Isolator into Shoe 2. Insert Glass 3. Insert PanelGrip on Opposing Side 4. Tighten Screw with Allen Wrench 5. Done!
Reduce Labor Costs up to 80%
No sealing of shoe, no setting blocks, no plumbing of glass, no multiple pours of cement, no waiting for cement to cure, no messy clean-up.
Reduce Freight Costs up to 30%

PanelGrip base shoe is 30% lighter than standard base shoes yet meets structural load requirements for railings.
Broadest Grip Range Of Any Dry Glaze Option

Made for nominal 1/2 tempered glass but will work for any panel between .450 and .515 (11.5mm and 13mm).
No Special Tools required

All you need is an Allen wrench for installation or removal.
No Mess
No mixing and pouring of expansion cement, no running of cement on incline.
NEW
12
Panelgrip system
PanelGrip Dry Glaze System - Patent Pending
The PanelGrip System utilizes a unique locking mechanism of high-strength aluminum and PVC isolators combined with a specially designed aluminum shoe moulding. When assembled with 1/2 or 3/4 tempered glass, PanelGrip enables the installer to fabricate a structural glass railing system with significant reductions in labor and freight costs. PANELGRIP INSTALLATION:
1. PlUmbing PanelGriP SHoe MoUlding Before completing attachment of PanelGrip Shoe Moulding to substrate in multi-panel railings take all necessary steps to assure that the mounted shoe is adjusted such that the inside channel of the shoe it is plumb to +/- 1/8 at an extended height of 42. Spend the time required to plumb the shoe to this tolerance since the glass will only be as plumb as the shoe. One method for plumbing the shoe is the Plumbing Bar Kit. 2. CLEAR THE PANELGRIP BASE SHOE OF ALL DEBRIS. 3. PlACE iSOLATORS Place the PanelGrip Plastic Isolators into the Shoe Moulding. Space Plastic Isolators a maximum of 14 on center with a maximum of 4 in from the left and right edges of each panel 4 isolators per 4 foot panel. 4. PLACE GLASS Place the glass atop the Plastic Isolators in the Shoe Moulding. PanelGrip will work with nominal 1/2 and 3/4 glass. Warning: With multi-panel railings, do not line up the edge of a panel with the end of the shoe place the panels so that they Span PanelGrip Shoe Moulding butt joints to assist in alignment. 5. iNSERT pANELgRIP Have someone hold the panel in place while you insert the aluminum PanelGrip mechanism into place on the opposite side of the glass in alignment with the Plastic Isolators. Make sure that the black, plastic pad on the PanelGrip is facing the glass. 6. tIGHTEN pANELgRIP Using the 3/16 hex head wrench provided, tighten the cap screw on the PanelGrip mechanism. While tightening, the plastic pad will break away from the aluminum as the unit expands. 7. cONFIRM ALIGNMENT AND TIGHTEN Confirm alignment and make adjustments prior to final tightening which will compress and lock the panel into place. Remember, PanelGrip is self-centering and self- plumbing. Make sure you have properly plumbed the shoe as noted in Step 1. Once you have confirmed position, use the 3/16 hex head wrench to make the PanelGrip Cap Screw snugtight, then continue tightening for one quarter turn 10-15 ft/lbs of torque. Repeat on all other PanelGrip units to secure the panel in position. 8. Seal top of sHoe Once glass is properly positioned, seal gap at the top of the PanelGrip Shoe Moulding using one of the three Gasket styles noted below. Spray glass cleaner onto glass to facilitate insertion of gaskets. V50-0003 is used without cladding V50-0004 is inserted between cladding and glass V50-0005 is taped to the underside of the top lip of the cladding. 9. reMOVAL OF GLASS Should you need to remove a panel, this can be done simply by loosening the PanelGrip Cap Screw. N ote: The Cap Screw included in the PanelGrip contains a pressure-sensitive locking compound that insures the screw remains tight over time and through cyclic loading. Each insertion and removal cycle diminishes its locking capacity. Individual results will vary but four cycles is the typical life span of the compound.
13
RAILING SYSTEMS
RAILING SYSTEMS
Panelgrip system
Aluminum Base Shoe
PanelGrip Base Shoe is extruded from 6063-T5 in mill finish (other lengths available upon request). Please refer to page 27 for custom drilling patterns.
1.93 .410 1.68 .410
3 1/4
4 1 1/4
3 1/4
4 1
3/4 1 3/4 2 3/4 A42-0074 Stocked in: 10 & 20 lengths CB, CS & Undrilled
(PanelGrip System)
3/4 1 3/4 2 1/2
NEW
NEW
A42-0075 Stocked in: 10 & 20 lengths CB, CS & Undrilled

(PanelGrip System)
For use with 3/4glass
For use with 1/2glass
Screws & Bolts

F92-0075FH F92-0075WB
Stainless Steel Flat Head Screws (10 per pkg) Zinc Plated Wedge-Bolt - Orange Tip (10 per pkg)
1/2 - 13 x 1 1/4 3/8 x 4

NEW
Aluminum Base Drain Block

Placed under exterior installed base shoes to provide drainage space for water runoff. Great for balconies and decks. 10 blocks per package.
Part# Measurement
A42-0013-10
2 1/4 x 2 1/2 x 3/8

NEW
Plumbing Bar Kit

Plumbing bar kit includes plumbing bar and one panel grip.
1. Place isolator in shoe, insert plumbing bar on top of the isolator and lock into place with a PanelGrip. 2. Shim as needed until a level indicates vertical plumb. 3. Remove plumbing bar and repeat as needed.
NEW
A42-0021
14
Panelgrip system
Cladding
Stainless Steel
Part#
RAILING SYSTEMS
.035 guage/thickness, #8 polished or #4 brushed finishes are standard.

A B Length Base Section
S16-0075 S16-0074
.8125 4.0 .8125 4.0
10, 12 10, 12
A42-0075 A42-0074
Brass (or Muntz)

Part# A

B Length Base Section
B11-0075 B11-0074
.8125 4.0 .8125 4.0
10, 12 10, 12
A42-0075 A42-0074
S16-0075 B11-0075 A16-0075 S16-0074 B11-0074 A16-0074
Aluminum
Part#
.050 guage/thickness, available in clear satin and dark bronze.

A B Length Base Section
NEW
NEW
A16-0075 A16-0074
.8125 4.0 .8125 4.0
10, 12 10, 12
A42-0075 A42-0074
End Caps
Stainless Steel End Caps
Part#

Base Section Part #
S17-0074 S17-0075
A42-0074 A42-0075
Brass (or Muntz) End Caps

Part#

Base Section Part #
B12-0074 B12-0075
A42-0074 A42-0075
Aluminum End Caps

Part#
Aluminum end caps are oversized for easy finishing. 050 guage/thickness, available in mill finish, clear satin and dark bronze.
Base Section Part #
NEW
A17-0074 A17-0075
A42-0074 A42-0075
Recommended Attachment Options

1. Apply two rows of tape to the vertical face of the cladding and apply a silicone bead between the rows.
Take care to properly align cladding before pressing into place.
2. Apply three rows of tape to the

vertical face of the cladding.
3. Apply silicone to the vertical face
of the cladding. Use clamps to hold the cladding in place until the silicone cures.
15
RAILING SYSTEMS
Panelgrip system
Panel Grip Isolator
The patented PanelGripTM System utilizes a unique locking mechanism of high-strength aluminum and PVC isolators combined with a specially designed aluminum shoe moulding. Isolator assembly is adjustable to accommodate both 1/2 and 3/4 glass. The PanelGrip System was tested per ASTM E935 Standard Test Methods for Performance of Permanent Railing Systems
and Rails for Buildings. This test report can be requested by calling customer service at 1-800-325-7513.
PANELGRIP SPACING GUIDELINES

NEW
Part#
Description
A42-0011-4 A42-0011-1
Package of Four Single Unit
Rubber Base Shoe Gaskets

Part# Width Height
System for 200 lb. point load with 4 safety factor 14" center-to-center maximum with 4" maximum from center to glass edge.
For use without cladding. Seals the gap at top of base shoe. Sold by the foot.
V50-0003
3/4 9/16
NEW
V50-0003
For use with cladding. Set cladding into place on base shoe, then press into place between glass and cladding. Sold by the foot.
Part# Width Height
NEW
V50-0004
1/2 7/16
V50-0004
For use with cladding only. Peel back paper to reveal self adhesive strip. Adhere to underside of cladding before applying cladding to base shoe. Sold by the foot.
Part# Width Height
NEW
V50-0005
1 1/8 1/4
V50-0005
16
glasswedge system
GlassWedge Dry Glaze System - Patent Pending
GlassWedge Isolator
The patented GlassWedge System consists of a high impact plastic wedge and a high strength Aluminum Wedge. The GlassWedge provides the installer with a simpler, cleaner method of setting tempered glass panels in base shoe moulding.
RAILING SYSTEMS
Setting Chisel A42-0020

NEW
NEW
1/2 Glass
Part# Description
Easy Installation
A42-0014-4 A42-0014-1
3/4 Glass
Part# Description
A42-0015-4 A42-0015-1
Place isolators onto the bottom of the glass panel.
Tap the aluminum wedge into place using the special chisel available.
Check plumb then drive the aluminum wedge to locked position.
GLASSWEDGE SPACING GUIDELINES
17
RAILING SYSTEMS
System Details
Morse Industries glass and metal handrail system components are designed for use with 1/2 or 3/4 tempered glass panels as structural balusters. Whether the job specifies a wet or dry system, Morse Industries railing systems deliver the beauty you want for the finishing touch on your commercial and residential installations.
Unique Top Rail Process Ensures Smoother Installation

Our unique manufacturing process ensures consistently high-quality railings for your clients. A special bump-forming process forms the metal around a radius die, ensuring reduced spring back of the finished rail. The result: tighter tolerence and smoother installation of end-to-end connections of top rail, splices, corners, and end caps. For increased strength and stability, the channel within the brass and stainless top rail is welded in place every 3 inches on both sides.
Materials and Finishes

To ensure a superior product, we use only the highest-quality materials. Each component receives multiple runs on state-of-the-art polishing equipment to ensure a consistent, bright finish. Aluminum handrail sections are extruded from alloy 6063-T5. Base sections are extruded from alloy 6063-T5. Both are available in mill or anodized finish. Brass rail components are made from Type #260 Brass. Our standard finish is #8 polished. Stainless steel components are made from Type 304 stainless steel (or Type316L upon request). Standard finishes are #8 polished and #4 brushed. Custom finishes available for aluminum components include anodizing and powder coating. Minimum runs and extended lead times may be required.
F I N I S H E S
mill nish aluminum alloy 6063-T5
anodized aluminum alloy 6063-T5
#8 polished brass type 260
brushed brass type 260
#8 polished stainless steel type 304
#4 brushed stainless steel type 304 Image used with permission
Contact Morse Industries for architect railing specications and railing quote worksheets, CAD details, and component information.
18
glass railing components

What Makes Morse Industries Unique
Offer two different types of dry systems. Experienced railing specialists to assist you. Special bump-forming process creates precise rail connections. Superior finishing process. Extensive selections of sizes and materials. Custom and standard hole drilling for aluminum base. Custom corner components available. Top rail protected with removable plastic film.
RAILING SYSTEMS
Top Rail End Cap
Internal Connector Sleeves/Splicers Mitered/ Custom Corners
Protective Vinyl Inserts
ADA Compliant Railing Glass Mount Handrail Brackets Cap Screws
1/2or 3/4 Tempered Glass
Setting Blocks
End Cap
Base Shoe Extruded from 6063-T5 Aluminum Alloy
Base Cladding
19
RAILING SYSTEMS
Aluminum Handrail Base

Attachment of the base section to substrate is a critical factor in determining the strength of the glass rail system. While there are alternate methods of attachment, the illustrations below demonstrate four methods in which the base sections were independently engineered.
1/2 glass 1/2 glass
Filler
Filler
Setting Block 1/2 Cap Screws 12 O.C. 1/2 x 4 steel plate Minimum 2 concrete under plate
Setting Block 1/2 Cap Screws 12 O.C. 1/2 x 4 steel plate
1/4 minimum Anchors: 3/8x2 1/2 T-bolts 18 O.C. in 3,000 lb. concrete
1/4 minimum Fascia Mount Using A42-0090
Surface Mount Using A42-0076
General Installation Notes

These instructions are general in nature. Please consult local authorities for specification requirements. 1. Attach aluminum shoe molding to substrate with 1/2 stainless steel cap screws or bolts on 12 centers. Note: Aluminum must not be placed in direct contact with concrete or dissimilar metals. Use appropriate paint or primer. 2. Resilient setting blocks of 4 to 6 lengths provide support and cushion for glass panels as the 1/2 tempered float glass is inserted into the base section. Setting blocks should be placed at points 1/4 and 3/4 of the length of the panel from the end. A 1/4 vinyl spacer should be inserted between adjoining glass panels to prevent glass to glass contact. Align and plumb glass panels. Fill base with expansive cement or non-shrinking, non-metallic grout of choice at the discretion of the specifier/fabricator. 3. Rigid protective insert protects the top edge of the glass panel and fits inside the handrail - silicone or clear adhesive can be used to add finishing seal between glass and handrail. Internal splice connectors are designed for endto-end connection of railing sections and corners. End caps fit securely into top rail for finishing accent, and can be welded or fastened with adhesive or screws. 4. Cover exposed base with cladding material to match top rail. Silicone or twoway tape can be used to adhere cladding.
Code Requirements and Regulations

Model code regulations usually require either a 50 lb/ft uniform loading or a 200 lb concentrated load to the handrail at a distance of 42 above floor level. Most model codes require that handrails be capable of safely resisting these loads. The designer should consult governing code, local ordinances, project specifications, and regulatory authorities to determine requirements for compliance. It is the responsibility of the building owner, architect, and installation subcontractor to comply with applicable building codes and regulations. All proposals and data herein are presented in good faith and based upon information Morse Industries believes to be accurate and reliable. As conditions and methods vary widely on the use of these products, Morse Industries does not imply or extend any warranty or guarantee for suggestions contained herein.
Contact Morse Industries for architect railing specications and railing quote worksheets, CAD details, and component information.
20
Top Rails
Glass Rail System
Morse Industries Top Rail is bump-formed around a radius die ensuring reduced spring back of the finished rail. Top Rails and handrail systems are manufactured to 31/1000th of an inch tolerance to eliminate fitting problems. They are also welded every 3 inches on both sides for increased strength and stability. When ordering by part number, use the following formula for part specifications (S= stainless steel, B= brass, A= aluminum, POL= polished, VEL= brushed): Metal (S, B, A) + Part Number + Finish (POL, VEL) + Length 10 long, 4 Polished Stainless Steel Top Rail is written, S16-0400POL10.
RAILING SYSTEMS
Stainless Steel Top Rails

Formed type 304, welded channel, #8 (polished) or #4 (brushed) finishes are standard. Type 316 is available upon request. Stocked in 10 and 14 lengths. Available in 7/8 opening for 3/4 glass upon request.
Part # A B C D
D
S16-0112* S16-0200 S16-0212 S16-0300 S16-0312 S16-0400 *
1 1/2 2 2 1/2 3 3 1/2 4
5/8 3/4 3/4 3/4 3/4 3/4
1 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2
.050 .050 .065 .065 .065 .065

B A
ADA Compliant
Brass (or Muntz) Top Rails

Formed #260 brass, welded chanel, #8 (polished) or #4 (brushed) finishes are standard. #280 Muntz is also available. Stocked in 10and 14 lengths. Available in 7/8 opening for 3/4 glass upon request.
Part # A B C D
D
B10-0112* B10-0200 B10-0212 B10-0300 B10-0312 B10-0400 *
1 1/2 2 2 1/2 3 3 1/2 4
5/8 3/4 3/4 3/4 3/4 3/4
1 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2
.050 .050 .065 .065 .065 .065

B A
ADA Compliant
Aluminum Top Rails

Extruded, 6063-T6, mill finish is standard. Stocked in 20 lengths.
Part # A B C D
D
A56-0200 A56-0212
1 29/32 3/4 2 1/2 3/4
1 1/4 1/8 1 1/4 1/8

C
B A
21
RAILING SYSTEMS
Mitered Corners
Glass Rail System
Morse Industries Mitered Corners are fabricated from the same high quality materials as our railing sections. 90 and 135 degree corners are stock items. All other corners are fabricated per order and a template or technical drawing is required. Please specify angle of corner, where angle is measured, location of glass pocket, size and nish. Metal (S, B, A) + Part Number + Finish (P, V) + Channel Type (HH, HV, NC) + Angle 4 Polished, 90-degree horizonal/horizontal Stainless Steel Mitered Corner is written, S16-0400PHH90.
See pages 37 & 38 for information on ordering custom mitered corners
Stainless Steel Mitered Corners

Fabricated from Morse Industries Top Rail and welded and finished to match. Available in 7/8 opening for 3/4 glass upon request.
Part # A B C D
S16-0112* S16-0200 S16-0212 S16-0300 S16-0312 S16-0400 *
1 1/2 2 2 1/2 3 3 1/2 4
5/8 3/4 3/4 3/4 3/4 3/4
2 3/8 2 5/8 2 7/8 3 1/8 3 3/8 3 5/8
3 1/2 4 4 1/2 5 5 1/2 6
ADA Compliant
Brass (or Muntz) Mitered Corners

Fabricated from Morse Industries Top Rail and welded and finished to match. Available in 7/8 opening for 3/4 glass upon request.
Part # A B C D
D
B10-0112* B10-0200 B10-0212 B10-0300 B10-0312 B10-0400 *
1 1/2 2 2 1/2 3 3 1/2 4
5/8 3/4 3/4 3/4 3/4 3/4
2 3/8 2 5/8 2 7/8 3 1/8 3 3/8 3 5/8
3 1/2 4 4 1/2 5 5 1/2 6
B C
ADA Compliant
A
Aluminum Mitered Corners

Part # A B C D
A56-0200 A56-0212
1 29/32 3/4 2 1/2 3/4
2 5/8 2 7/8
4 4 1/2
H/H (Horizonal/Horizontal)
H/V (Horizontal/Vertical)
N/C (No Channel, (Special Order)
22
End Caps
Glass Rail System
Morse Industries End Caps fit securely into the Top Rail for a finishing accent. The End Cap can be welded or fastened with adhesive. Available in #8 polished finish or #4 brushed finish. When ordering by part number, use the following formula for part specifications (S= stainless steel, B= brass, A= aluminum, P= polished, V= brushed, EC= end cap):
RAILING SYSTEMS
Metal (S, B, A) + Part Number + Finish (P, V) + EC 4 Polished Stainless Steel End Cap is written, S16-0400PEC.
Stainless Steel End Cap

End Cap with 3/4 pocket is for 1/2 glass. The 7/8 pocket is for 3/4 glass.
Part # A B
S16-0112* S16-0200 S16-0212 S16-0300 S16-0312 S16-0400 *
1 1/2 2 2 1/2 3 3 1/2 4
.050 .050 .065 .065 .065 .065
ADA Compliant
Brass (or Muntz) End Cap

End Cap with 3/4 pocket is for 1/2 glass. The 7/8 pocket is for 3/4 glass.
Part # A B
<image>
B10-0112* B10-0200 B10-0212 B10-0300 B10-0312 B10-0400 *
1 1/2 2 2 1/2 3 3 1/2 4
.050 .050 .065 .065 .065 .065
ADA Compliant
A
Aluminum End Cap

Part # A B
A56-0200 A56-0212
1 29/32 .125 2 1/2 .125
1 B
23
RAILING SYSTEMS
Connector Sleeves
Glass Rail System
Stainless Steel Connector Sleeves
Part # A Tubing Size
S16-0112CS* S16-0200CS S16-0212CS S16-0300CS S16-0312CS S16-0400CS *
1 3/8 1 7/8 2 3/8 2 7/8 3 3/8 3 7/8
1 1/2 x .050 wall 2 x .050 wall 2 1/2 x .065 wall 3 x .065 wall 3 1/2 x .065 wall 4 x .065 wall
ADA Compliant
Brass (or Muntz) Connector Sleeves

B10-0112CS* B10-0200CS B10-0212CS B10-0300CS B10-0312CS B10-0400CS *
1 3/8 1 7/8 2 3/8 2 7/8 3 3/8 3 7/8
1 1/2 x .050 wall 2 x .050 wall 2 1/2 x .065 wall 3 x .065 wall 3 1/2 x .065 wall 4 x .065 wall
ADA Compliant
Aluminum Connector Sleeves

A56-0200CS A56-0212CS
1 5/8 2 1/4
1 29/32 x .125 wall 2 1/2 x .125 wall

A
24
Vinyl Insert/ Setting Block

Glass Rail System
Protective Vinyl Insert for Top Rails
Rigid vinyl protective insert is available for both 1/2 and 3/4 glass. Providing a protective barrier, the insert protects glass panels when fitted inside top rail as well as aiding in alignment during installation. Stocked in 10 ft. lengths. These vinyl inserts are not compatible with 1 1/2 top rail.
Part# Description
RAILING SYSTEMS
V50-0001BKA10 Top Rail Insert for 1/2 Glass V50-0007BKA10 Top Rail Insert for 3/4 Glass
NEW
Setting Block for Base Sections

Setting block supports and protects glass when fitted in the base section and is available for both 1/2 and 3/4 glass. Easily center glass in base shoe and support panels during expansion cement installations. We recommend two 4 pieces located at quarter points along the bottom of each panel. Resilient EPDM provides durability and longevity, is stocked in 25 coils, and can be cut to any size.
Part# Description
V50-0002BKA25 Setting Block for 1/2 Glass V50-0006BKA25 Setting Block for 3/4 Glass
NEW
25
RAILING SYSTEMS
Standoff bracket, wall moUnt & drain block

Glass Rail System
1 Dual Post Glass Stand Off Bracket
Our stainless steel Stand Off Bracket allows you to be innovative and creative in your design. Brackets are used in retail, commercial and residential applications such as glass rail, wind screens, signage, displays, elevated surfaces, and glass walls. Available in 304 Stainless Steel with a brushed nish.
End Cap Nylon Bushings
10 S10-0401
NEW
1.925
Top Rail to Wall Support Mount

Morse Industries Wall Support Mount provides lateral support if Top Rail is to be attached to a wall surface. Use #10, 82 degree countersunk fasteners. The Wall Support Mount is not designed for use with the 1 1/2 Top Rail.
Wall Support Mount
A42-0010AEY Rail 1/2 3/4 Wall 7/32 Countersunk Holes 1 1/4 Glass
Side
Front
Aluminum Base Drain Block

Placed under exterior installed base shoes to provide drainage space for water runoff. Great for balconies and decks. 10 blocks per package.
Part# Measurement
A42-0013-10
2 1/4 x 2 1/2 x 3/8
NEW
26
AlUminUm Base SHoes

Glass Rail System
Base Section Hole Drilling Patterns (Optional)
Custom hole drilling for aluminum base is available with four standard drilling patterns for 1/2 cap screws and bolts. For standard drilling patterns, drilling begins 6 from the end and continues every 12 on center.
NOTE: Illustrations are to show hole size on standard drilling and are represented in black. Check each base for the code indicating available drilling options.
RAILING SYSTEMS
9/16 5/8 7/8 7/16 9/16 CB = Counter Bore 7/16 SD = Side Drill
7/8 7/8
5/8 D= Drilling
5/8 CS = 82 Counter Sunk
Handrail Base Sections

Extruded 6063-T5 Aluminum Bottom Rails in mill finish (other lengths available upon request). Codes for stocked drilling patterns can be found in the diagram above.
1.93 5/16 3 1/4 1 3/4 3/4 2 3/4 1 1/4 3/4 7/8 1 3/8 A42-0064 Stocked in: 20 lengths Undrilled
NEW
.410
1.68
.410 1/2
3 1/4
4 1
3 3/8
4 1/8 1
3/4 1 3/4 2 3/4 1 3/4 2 1/2

NEW
3/4 2 1/2 A42-0076 Stocked in: 12 & 20 lengths - D

(PanelGrip System)

(PanelGrip System)
3/4 5/8 1/2 1/2
3/4
3 3/8 2 11/16 1 13/16 2 1/4

NEW
3 1/2 4 1/8 1 1 1/4 4 1/4
3 1/2
3/4 2 1/2 A42-0090 Stocked in: 12 & 20 lengths D, CB, SD & Undrilled
3/4 2 3/4
NEW
A42-0088 Stocked in: 12 & 20 lengths - CB
A42-0099 Stocked in: 12 lengths - CB
27
RAILING SYSTEMS
Base Section Cladding

Glass Rail System
Morse Industries brass and stainless Cladding is available to match Top Rail. One length covers one side only. Custom size Cladding and End Caps are available. Cladding can be attached with silicone epoxy or two-way tape. When ordering by part number, use the following formula for part specifications (S= stainless steel, B= brass, A= aluminum, POL= polished, VEL= brushed): Metal (S, B, A) + Part Number + Finish (POL, VEL) A 10 length of 4 Polished Stainless Steel Base Section Cladding is written, S16-0090POL10.
Stainless Steel Base Cladding

Part# A B Length Base Section
A A
S16-0064 S16-0075 S16-0074 S16-0076 S16-0088 S16-0090 S16-0099
.4375 .8125 .8125 .5 .865 1.0 1.0
2.75 4.0 4.0 4.125 3.5 4.125 4.5
10, 12 10, 12 10, 12 10, 12 10, 12 10, 12 10, 12
A42-0064 A42-0075 A42-0074 A42-0076 A42-0088 A42-0090 A42-0099
B B
S16-0064 B11-0064 A16-0064
S16-0074 B11-0074 A16-0074
Brass (or Muntz) Base Cladding

A
B11-0064 B11-0075 B11-0074 B11-0076 B11-0088 B11-0090 B11-0099
.4375 .8125 .8125 .5 .865 1.0 1.0
2.75 4.0 4.0 4.125 3.5 4.125 4.5
10, 12 10, 12 10, 12 10, 12 10, 12 10, 12 10, 12
A42-0064 A42-0075 A42-0074 A42-0076 A42-0088 A42-0090 A42-0099
S16-0075 B11-0075 A16-0075 A
S16-0076 B11-0076 A16-0076 A
Aluminum Base Cladding

.050 guage/thickness, available in clear satin and dark bronze.
A16-0064 A16-0075 A16-0074 A16-0076 A16-0088 A16-0090 A16-0099
.4375 .8125 .8125 .5 .865 1.0 1.0
2.75 4.0 4.0 4.125 3.5 4.125 4.5
10, 12 10, 12 10, 12 10, 12 10, 12 10, 12 10, 12
A42-0064 A42-0075 A42-0074 A42-0076 A42-0088 A42-0090 A42-0099
S16-0088 B11-0088 A16-0088
S16-0090 B11-0090 A16-0090 A
Recommended Attachment Options

1. Apply two rows of tape to the vertical face of the cladding and apply a silicone bead between the rows.
Take care to properly align cladding before pressing into place.
2. Apply three rows of tape to the

vertical face of the cladding.
3. Apply silicone to the vertical face
of the cladding. Use clamps to hold the cladding in place until the silicone cures.
S16-0099 B11-0099 A16-0099
28
Cladding End Caps

Glass Rail System
Morse Industries brass, stainless and aluminum Cladding End Caps match base section or base cladding. Cladding End Caps can be attached with silicone, epoxy or two-way tape. Aluminum Cladding End Caps are recommended when base sections are anodized or powder-coated. When ordering by part number, use the following formula for part specifications (S= stainless steel, B= brass, A= aluminum, POL= polished, VEL= brushed): Metal (S, B, A) + Part Number + Finish (POL, VEL) A Polished Stainless Steel End Cap is written, S17-0090POL.
RAILING SYSTEMS
Stainless Steel End Caps

Part# Base Section Part #
S17-0064 S17-0074 S17-0075 S17-0076 S17-0088 S17-0090 S17-0099
A42-0064 A42-0074 A42-0075 A42-0076 A42-0088 A42-0090 A42-0099
Brass (or Muntz) End Caps

B12-0064 B12-0074 B12-0075 B12-0076 B12-0088 B12-0090 B12-0099
A42-0064 A42-0074 A42-0075 A42-0076 A42-0088 A42-0090 A42-0099
Aluminum End Caps

Aluminum end caps are oversized for easy finishing. 050 guage/thickness, available in mill finish, clear satin and dark bronze.
A17-0064 A17-0074 A17-0075 A17-0076 A17-0088 A17-0090 A17-0099
A42-0064 A42-0074 A42-0075 A42-0076 A42-0088 A42-0090 A42-0099
29
RAILING SYSTEMS
Glass Grips & clamps

Glass Rail System
Morse Industries offers stainless steel, brass and chrome plated brass grips for securing glass panels with guard rail and booth divider glass applications. The Glass Grip tightening system utilizes solid rubber gaskets, holding heavy floating glass panels as it securely grips them to prevent sliding. They have 1/4 and 3/8 adjustable openings, as well as 1/2 fixed openings. The safety pin fits through a hole in the glass for added support.
Adjustable Glass Grip for 1/4 to 3/8 Glass

Part # Tubing Size Finish Metal
S10-0816POL S10-0816FPOL S10-0816VEL S10-0816FVEL C10-0816POL C10-0816FPOL C10-0816VEL C10-0816FVEL B10-0816POL B10-0816FPOL
2 3/16
2 OD Concave Flat Back 2 OD Concave Flat Back 2 OD Concave Flat Back 2 OD Concave Flat Back 2 OD Concave Flat Back
Polished Polished Brushed Brushed Polished Polished Brushed Brushed Polished Polished
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Brass Brass
1 1/16
1 1/16 Solid Rubber O-Rings 2 1/8 27/32 21/32 Flat Back Concave Back Glass Support Pin Clip Top Install through prefabricated hole in glass (optional)
2 1/2
Clip Base
Rubber O-Rings
Glass Clamp for 1/2 Glass

Gaskets are also available for 1/4, 3/8 or 1/2 glass.
S10-0813POL S10-0813FPOL S10-0813VEL S10-0813FVEL

2 3/20
2 OD Concave Flat Back 2 OD Concave Flat Back
Polished Polished Brushed Brushed
Stainless Steel Stainless Steel Stainless Steel Stainless Steel

1 3/8
1 3/8
2 3/20
Solid Rubber Gaskets
2 7/20
5/8 Flat Back
5/8
Concave Back
30
TUbing & flUsH end caps

Hand Railing Components
Round Stainless Steel Tubing
Type 304, #8 (polished) or #4 (brushed) finishes are standard. Type 316 is available upon request.
Part # A B Length Finish
B
RAILING SYSTEMS
S16-0112VEL20* S16-0112POL20* S16-11265VEL20* S16-11265POL20* S16-0203VEL20 S16-0203POL20 S16-0223POL20 S16-0223VEL20 S16-0103VEL20 S16-0103POL20 *
ADA Compliant
1 1/2 1 1/2 1 1/2 1 1/2 2 2 2 2 2 1/2 2 1/2
.050 .050 .065 .065 .050 .050 .065 .065 .065 .065
20 20 20 20 20 20 20 20 20 20
Brushed Polished Brushed Polished Brushed Polished Polished Brushed Brushed Polished
Round Brass (or Muntz) Tubing

#260 brass, #8 (polished) or #4 (brushed) finishes are standard. #280 Muntz is also available.
Part # A B Length Finish
B10-0112VEL12* B10-0112POL12* B10-0118VEL12 B10-0118POL12 B10-0116VEL12 B10-0116POL12 B10-0113VEL20 B10-0113POL20 *
1 1/2 1 1/2 2 2 2 2 2 1/2 2 1/2
.050 .050 .050 .050 .065 .065 .065 .065
12 12 12 12 12 12 20 20
Brushed Polished Brushed Polished Brushed Polished Brushed Polished
ADA Compliant
Flush End Caps

Morse Industries offers type 316 stainless steel, brass and chrome plated brass fittings to finish off custom handrail applications. Fittings are designed for use with 1 1/2 or 2 tubing with .050 wall thickness. Ball fittings and many other components are available (please inquire).
Part # D H Tubing Size Finish Metal
S10-0600POL-1.5 S10-0600VEL-1.5 S10-0600POL S10-0600VEL C10-0600POL-1.5 C10-0600POL B10-0600POL-1.5 B10-0600POL
1 1/2 1 1/2 2 2 1 1/2 2 1 1/2 2
1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8
1 1/2 OD 1 1/2 OD 2 OD 2 OD 1 1/2 OD 2 OD 1 1/2 OD 2 OD
Polished Brushed Polished Brushed Polished Polished Polished Polished
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Chrome Plated Brass Chrome Plated Brass Brass Brass
D H
31
RAILING SYSTEMS
Handrail Brackets
Standard Wall Handrail Brackets
For standard wall mounting.
Part # A B Tubing Size Finish Metal
A
S10-0301POL-1.5* S10-0301VEL-1.5* S10-0301POL S10-0301VEL C10-0301POL C10-0301POL-1.5* B10-0301POL B10-0301POL-1.5* *
2 3/4 2 3/4 3 1/8 3 1/8 2 1/2 2 3/4 2 1/2 2 3/4
1 13/16 1 13/16 1 9/16 1 9/16 2 1/2 2 1/2 2 1/2 2 1/2
1 1/2 OD 1 1/2 OD 2 OD 2 OD 2 OD 1 1/2 OD 2 OD 1 1/2 OD
B 2 1/2
ADA Compliant
Glass Mounted Handrail Brackets

Enables handrail mounting to the face of tempered glass balustrades. Includes a 9/16 OD nylon spacer and two neoprene gaskets. Prior to tempering, drill a 5/8 hole in the glass.
2 1/2
C10-0303POL* C10-0304POL B10-0303POL* B10-0304POL *
1 1/2 OD 2 OD 1 1/2 OD 2 OD
Polished Polished Polished Polished
Chrome Plated Brass Chrome Plated Brass Brass Brass
2 1/2 2 3/8 1/4
ADA Compliant
Acrylic Spacer
Neoprene Gasket
Adjustable Glass Mounted Handrail Brackets

Enables handrail mounting to the face of tempered glass balustrades. Includes a 9/16 OD nylon spacer and two neoprene gaskets. Prior to tempering, drill a 5/8 hole in the glass.
Part # A B Tubing Size Finish Metal
A
S10-0305POL* S10-0305VEL* S10-0306POL S10-0306VEL C10-0305POL* C10-0306POL B10-0305POL* B10-0305VEL* B10-0306POL B10-0306VEL *
2 1/2 2 1/2 2 1/2 2 1/2 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8
2 1/2 2 1/2 2 1/2 2 1/2 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8
1 1/2 OD 1 1/2 OD 2 OD 2 OD 1 1/2 OD 2 OD 1 1/2 OD 1 1/2 OD 2 OD 2 OD
Polished Brushed Polished Brushed Polished Polished Polished Brushed Polished Brushed
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Chrome Plated Brass Chrome Plated Brass Brass Brass Brass Brass
B 2 1/2 5/16
Acrylic Spacer
Neoprene Gasket
ADA Compliant
32
FlUsH Fittings
RAILING SYSTEMS
Flush Ell
Part # W L Tubing Size Finish Metal
W
3 1/2 3 1/2 4 4 2 2 1/2 2 2 1/2
3 1/2 3 1/2 4 4 2 2 1/2 2 2 1/2
Flush Radius Ell

W
3 1/2 3 1/2 4 4 2 7/8 3 2 7/8 3
3 1/2 3 1/2 4 4 2 7/8 3 2 7/8 3
Flush 135 Degree Angle

W
2 5/8 2 5/8 2 15/16 2 15/16 2 3/8 2 7/8 2 3/8 2 7/8
3 5/8 3 5/8 3 5/8 3 5/8 3 3 3/8 3 3 3/8
33
RAILING SYSTEMS
FlUsH Fittings
Flush Side Outlet Ell
2 2 2 1/2 2 1/2 2 2 1/2 2 2 1/2
2 2 2 1/2 2 1/2 2 2 1/2 2 2 1/2
Flush Tee
2 3/4 2 3/4 2 3/4 2 3/4 2 1/2 3 2 1/2 3
2 2 2 1/4 2 1/4 2 2 1/2 2 2 1/2
Wall Return
3 1/4 3 1/4 3 1/4 3 1/4 3 1/2 3 1/2 3 1/2 3 1/2
3 1/8 3 1/8 3 1/8 3 1/8 2 3/4 3 1/8 2 3/4 3 1/8
34
FlUsH Fittings
RAILING SYSTEMS
Perpendicular Collar
1 1/2 1 1/2 2 2 1 1/2 2 1 1/2 2
1 1/2 1 1/2 1 3/4 1 3/4 1 1/2 1 3/4 1 1/2 1 3/4
Floor Socket with Cap

S10-0545POL C10-0545POL B10-0545POL
5 5 5
4 1/2 4 1/2 4 1/2
2 OD 2 OD 2 OD
Polished Polished Polished
Stainless Steel Chrome Plated Brass Brass
35
RAILING SYSTEMS
Flanges
Wall Flange
H
S10-0510POL-1.5 S10-0510VEL-1.5 S10-0530POL S10-0530VEL C10-0510POL-1.5 C10-0530POL C10-0550POL B10-0510POL-1.5 B10-0530POL B10-0550POL
3 3 4 4 3 4 5 1/2 3 4 5 1/2
1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/4 1 1/4 1 1/2
1 1/2 OD 1 1/2 OD 2 OD 2 OD 1 1/2 OD 2 OD 2 1/2 OD 1 1/2 OD 2 OD 2 1/2 OD
Polished Brushed Polished Brushed Polished Polished Polished Polished Polished Polished
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Chrome Plated Brass Chrome Plated Brass Chrome Plated Brass Brass Brass Brass
Floor Flange
S10-0532POL S10-0532VEL C10-0534POL B10-0534POL
5 5 7 7
1 3/8 1 3/8 1 1/2 1 1/2
2 OD 2 OD 2 OD 2 OD
Polished Brushed Polished Polished
Stainless Steel Stainless Steel Chrome Plated Brass Brass
D H
Flange Cover Plate

4 4 5 5 4 5 4 5
1 1/2 1 1/2 1 1/2 1 1/2 1 1/4 1 1/2 1 1/4 1 1/2
D H
Steel Flange
Includes 12 internal liner
Part # D H Tubing Size
D
S10-0541-1.5 S10-0541-2
3 1/2 4 1/2
12 12
1 1/2 OD 2 OD
Flange Mounting
Cement Mount
Tubing 540 Flange Cover Plate 541 Flange 4 Lag Bolts w/ Floor Anchor
Wood Mount
Tubing 532/534 Floor Flange Wood Screws
36
CUstom Mitered Corners

Glass Rail System
Morse Industries Custom Corners are fabricated from the same high quality materials as our railing sections. All Custom Corners are fabricated per order and a template or technical drawing is required. Please specify angle of corner, where angle is measured, location of glass pocket, size and finish. When ordering by part number, use the following formula for part specifications (S= stainless steel, B= brass, A= aluminum, P= polished, V= brushed, HH= horizontal/horizontal, HV= horizontal/vertical, NC= no channel): Metal (S, B, A) + Part Number + Finish (P, V) + Channel Type (HH, HV, NC) + Angle 4 Polished, 90-degree horizontal/horizontal Stainless Steel Mitered Corner is written, S16-0400PHH90. Identifying corners is an important part of the estimating and specifying process. There are 3 types of corners and failure to recognize the different types can be a costly mistake.
RAILING SYSTEMS
Corner #1 Horizontal / Horizontal (corner #1 is color coded on the stairway diagram)

This type of corner can be found on a level surface such as a deck and is easy to identify on a floor plan.
90 Degree
Corner #2 Horizontal / Vertical (corner #2 is color coded on the stairway diagram)

This type of corner is commonly found on a stairway and can be easy to miss on a floor plan. Although the standard stairway transition is 135 degrees, often this is not the case and should be bid as a custom H/V corner. Failure to identify a type 2 corner on a bid can erode the contractors margin.
135
135
135 Degree Descend
135 Degree Incline
Vertical / Horizontal 90 Degree
Mirror Image Corners (To the Left & Right)
37
RAILING SYSTEMS
CUstom Mitered Corners

Glass Rail System
Corner #3 Compound Corner (corner #3 is color coded on the stairway diagram)
This type of corner is often found on stairway landings. It is difficult to determine from many architectural drawings if a compound corner is required. An example is as follows: (Please note same corner but from different perspectives.)
90
45
Corner #2
Corner #2 Corner #3
Corner #2 Corner #1
Staircase Diagram
Additional Views of Same Staircase
38
ARCHITECTURAL EXTRUSIONS
J-Moldings U-Channels Commercial Channels, Angles & Flat Bar Glass Wall Partition Channels Aluminum Angles Aluminum Flat Bar
We work with Morse Industries because they are easy to do business with. They get us what our customers want in a timely fashion.
ACI Distribution Las Vegas
Counter Partition System
39
J-MOLDINGS
TM
J-Channel
Available in both deep and shallow, punched and slotted. Finishes include bright chrome, bright gold, brushed nickel, satin anodized and dark bronze in 12 lengths. 50 pieces per case; individually plastic sleeved for protection. Matching Mirror Images Angle and Flat Bar available.
.300 .939 .300 1.188 .625
TM
.375 J-Channel A50-0081 Punched and slotted .050 nominal metal thickness
Matching Mirror Images Angle and Flat Bar are available
J-Channel A50-0080 Punched and slotted .050 nominal metal thickness
Standard J-Channel
Standard J-Channel is available in bright chrome, bright gold in 12 or 16 lengths. Some J-channel is available in other finishes such as brushed nickel and clear satin and in 8 lengths. 50 pieces per case; individually plastic sleeved for protection.
.282 .282 .875 .625 .375 A50-0074 Punched and slotted .050 nominal metal thickness A50-0075 Punched and slotted .050 nominal metal thickness 1.375 .875 .375 A50-0077 .040 nominal metal thickness .265 1.25
.278 1.20 .625
.278
.625
NEW
A50-0078 .040 nominal metal thickness
A50-0079 .040 nominal metal thickness
.282 .312 1.20 .750 .844 .325 .250 A50-0058 Punched and slotted .050 nominal metal thickness A50-6045 .055 nominal metal thickness A50-0060 .055 nominal metal thickness 1.177 .677 1.195
.404 .404 1.0 .375 A50-3133 .051 nominal metal thickness A50-3134 .051 nominal metal thickness
.750
40
J-MOLDINGS

Multi-Use J-Channel
Morse Industries stocks other J-Moldings for miscellaneous applications. Available in a variety of finishes and lengths. 50 pieces per case, individually plastic sleeved for protection. All items in this section are mill run, special order only.
.71875 .1875 A50-604L 1/16 opening .060 nominal metal thickness
.71875 .21875
.71875 .21875
.71875 .3125 A50-6043 3/16 opening .060 nominal metal thickness
.71875 .3125
A50-604S 3/32 opening .060 nominal metal thickness
A50-604H 1/8 opening .060 nominal metal thickness
A50-6044 1/4 opening .060 nominal metal thickness
Finishes and Fabrication Available

All of the J-Channels listed are available in custom lengths and finishes. Punching and slotting is optional. Morse Industries can also create custom profiles to your specifications.
Bright Chrome Bright Gold Clear Satin Dark Bronze Polished - Buffed Aluminum Brushed Nickel Oil Rub Bronze
Divider Bar for Mirrors

Available in bright chrome, bright gold, brushed nickel, and clear satin in 12 lengths.
.281
1.25
.50
A50-0061
41
U-CHANNELS
Architectural Channels
Please inquire regarding available finishes and lengths. 50 pieces per case, individually plastic sleeved for protection.
Part# A B C D
A50-0235 A50-0237 A50-7133 A50-0244
.375 .375 .50 .625
.375 .938 .50 .625
.063 .063 .063 .063
.25 .25 .375 .50
Commercial Channels
Part# A B
NEW
Finishes available may include bright chrome, brushed stainless, clear satin, mill finish and dark bronze in 20 lengths, 12 pieces per case, individually plastic sleeved for protection.
C D
A40-0243 A40-1100 A40-1007 A42-0057 A40-1103 A40-1101 A40-1306 A40-1402 A40-1308 A40-1310
75 .75 .75 .75 1.0 1.0 1.0 1.0 1.25 1.5
.75 1.0 1.5 2.0 .75 1.0 1.5 2.0 1.25 1.5
.125 .125 .125 .125 .125 .125 .125 .125 .125 .125
.50 .50 .50 .50 .75 .75 .75 .75 1.0 1.25
Heavy Channels
5/16 1 1/4
3/4
1 3/4 3 1/2
A42-0064 is available in 20 lengths in mill finish A42-1002 is available in 12 lengths in mill finish
1 3/8 A42-0064
1/2 1 1/2 A42-1002
42
cOmmERcIAL cHANNELS, ANGLES & FLAT BAR

Commercial Channels, Angles and Flat Bars are used in a variety of commercial glazing applications such as tenant improvements for windows or doors, floor to ceiling application for glass walls (malls and retail storefronts) and much more.
Commercial Channels
Available in 20 lengths, 12 pieces per case, individually plastic sleeved for protection. Available in bright chrome, brushed stainless, clear satin, dark bronze and mill finish.
Part# A B C D
A40-0243 A40-1100 A40-1007 A42-0057 A40-1099 A40-1103 A40-1101 A40-1306 A40-1402 A40-1308 A40-1310
.75 .75 .75 .75 1.0 1.0 1.0 1.0 1.0 1.25 1.5
.75 1.0 1.5 2.0 .50 .75 1.0 1.5 2.0 1.25 1.5
.125 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125
.50 .50 .50 .50 .75 .75 .75 .75 .75 1.0 1.25
NEW
Commercial Angles
Available in 20 lengths, 12 pieces per case, individually plastic sleeved for protection. Available in clear satin, bronze and mill finish.
Part # A B C
A40-1185 A40-1187 A40-1163 A40-1202
.75 1.0 1.5 2.0
.75 1.0 1.5 2.0
.125 .125 .125 .125

NEW
Commercial Flat Bars

Available in 16 lengths, 30 pieces per case, individually plastic sleeved for protection. Available in white, bright chrome, bright gold, dark bronze and clear satin.
Part# A B
A40-0811* A40-0812* A40-0808 A40-0796 A40-0810 A40-0830 A40-0831 A40-0840 A40-0841
.50 .75 1.0 1.5 2.0 1.5 2.0 1.5 2.0
.125 .125 .125 .125 .125 .375 .375 .50 .50
NEW
* Only available in 12 lengths, clear satin finish.
43
GLASS WALL PARTITION Channels

Glass Wall Partitions
Morse Industries Partition Channels are available in clear satin, bronze and mill finish.
Standard Systems
.125 .125 1.50 .75 1.0 .75 A40-1306 Standard Header A42-0057 Standard Header A42-1002 Heavy Duty Header
1.0 A40-1306 .125
1.0 A40-1101
.125 2.0 .50 1.0 .50
.75 A42-0057* *mill nish only
.75 A40-1100
glass
glass
Heavy Duty Systems
Stainless Steel cladding in #4 of #8 finishes on page 28.

.25
.3125
3.50
1.0
1.75
.75
.50 1.50 A42-1002
1.0 1.375 A42-0064 A40-1101 Standard Base A40-1100 Standard Base A40-0064 Heavy Duty Base
44
ALumINum ANGLES
Architectural Angles
Available in a variety of finishes and lengths. Most products 50 pieces per case, individually plastic sleeved for protection.
.75
.875 .50
.75
.75
.313 A50-0704 .050 wall thickness
1.0
.938
.938 .625 .625
1.0 A50-0998 .0625 wall thickness
.313
A50-0277 Mirror Image .050 wall thickness Matches other Mirror Images items.
Commercial Angles
Available in clear satin, bronze and mill finish in 20 lengths. Product comes 12 pieces per case, individually plastic sleeved for protection.
Part # A B C
C
A40-1185 A40-1187 A40-1163 A40-1202
.75 1.0 1.5 2.0
.75 1.0 1.5 2.0
.125 .125 .125 .125
NEW
45
ALumINum FLAT BAR

TM
Flat Bar
Available in 12 lengths, 75 pieces per case. Individually plastic sleeved for protection. Matches Mirror Images Channels, Angles and Dividers.
Part#
TM
A50-0010
Matching Mirror Images Angle, and J-Channel are available.
.0625 .625
Flat Bar with Bevelled Edge

Available in 12 lengths, 100 pieces per case. Individually plastic sleeved for protection.
Part#
.050 .672
A52-0176
Flat Bar
Available in 16 lengths. Individually plastic sleeved for protection.
Part# A B
A50-0011 A50-0012 A50-0013 A50-0015*
.50 .75 1.0 1.5
.0625 .0625 .0625 .0625
B A
* Available with two way self adhesive tape for superior bonding.
ALUMINUM FLAT BAR FINISHES
white
bright chrome
bright gold
dark bronze
clear satin
46
ALUMINUM FLAT BAR
Commercial Flat Bar

Available in 16 lengths, 30 pieces per case. Individually plastic sleeved for protection.
Part# A B
A40-0811* A40-0812* A40-0808 A40-0796 A40-0810 A40-0830 A40-0831 A40-0840 A40-0841
.50 .75 1.0 1.5 2.0 1.5 2.0 1.5 2.0
.125 .125 .125 .125 .125 .375 .375 .50 .50
B
NEW
* Only available in 12 lengths, clear satin finish.
FLAT BAR FINISHES
dark bronze
clear satin
mill nish
47
counter PARTITION SYSTEM

Counter Partition System Components
Morse Industries Aluminum Partition Systems are easy to install and have no exposed screws. The same cap and base fit all three posts. All posts have a 1 1/4 outside dimension and are available in 12 lengths. Designed for 1/4 glass, components are stocked in a clear satin finish and other finishes are available on a mill run, special order basis only.
A55-4000 Black Nylon Top Cap Black Nylon Caps are square with pyramid apex and snap into posts. Same cap ts corner, center and end posts.
A55-3000 End Post A55-2000 Division Center Post A55-1000 Corner Post
A55-5000 Aluminum Base Bases are square with ribbed sides for press t. Base can be screwed or bolted to a countertop made of any material. 1.50
1.25
1.25
1.25
END
CENTER
CORNER POST
1/4 glass
1/4 glass
A55-3000 End Post
A55-2000 Division Center Post 1/4 glass
A55-1000 Corner Post
48
SLIDE TRACK SYSTEMS
SLIDE TRACK SYSTEMS
We can count on Morse Industries for quick service, quality products and expert product advice.
Brite Vue Glass Systems britevue.com
Smart Lock System Economy System Standard System
49
SLIDE TRACK SYSTEMS
SMART LOCK
Smart Lock is a European style lock system designed for use with 1/4 glass, acrylic or wood. It features a lock and clip that secures both doors to a slide track. The result is a safe, stable system with no rattling. Lock assembly can be installed for either right or left hand use and can be ordered in sets: keyed alike or mixed key. Installation can be completed in five easy steps...clean and quick.
Place glass in shoe and fit finger pull on end.
Fit plunger lock on end of second shoe section and secure with set screws.
Drill a 1/4 hole in the back shoe for the plunger lock. Screw secure clip onto bottom track between back shoe and front shoe.
Slide rollers into shoe, secure with set screws and install end cap.
Attractive, simple and secure.
50
SLIDE TRACK SYSTEMS
SMART LOCK
Smart Lock Slide Track System Components
The lock mounts to the end of the shoe with no drilling and no need to notch the glass. The locking security clip prevents removal, while lock and end caps protect glass corners. Available in clear satin, bright gold, bright chrome and dark bronze finishes in 12 lengths. Each part is sold separately.
Deep Header Track
Upper Slide Track or Vertical Upright
Anti-Rattle Insert Vinyl Insert Finger Pull End Cap Locking Shoe Roller
End Cap
Lower Security Track
Security Clip
Plunger Lock
Plunger Lock F93-2000 For use with A52-6303 only Two keys included. Lock is interchangeable, left or right hand and can be ordered in groups, keyed the same or mixed key.
Finger Pull End Cap F93-8575 For use with A52-6303 only
Wheels for use with A52-6303 Only Roller With Nylon Wheel F93-2050 Roller With Steel Ball Bearing Wheel F93-2055
Security Clip F93-6306 For use with A54-0371 only
End Cap F93-2060 For use with A52-6303 only
Smart Lock extrusions located on next page
51
SLIDE TRACK SYSTEMS
SMART LOCK
Smart Lock Slide Track System Extrusions
Available in clear satin, bright gold, bright chrome and dark bronze finishes in 12 lengths. Each part is sold separately and most are individually sleeved.
1.1875 1.1875
.46
.563
.50
.8125
.50
.694
.62
.533 Upper Slide Track or Vertical Upright A54-0154 Deep Header Slide Track A54-0372 Anti-Rattle Insert V25-7471 For use with A54-0372 only
.420 .50 .466
.461 1.610 .156 .3125 .280 Large Locking Shoe A52-6668 Locking Shoe A52-6303 1.0625 .272 Vinyl Insert for Shoe V25-2500 1/4 glass only
1.2188 1.1875 .50 .25 Lower Slide Track A54-0063 Glass Deduction = 1.25 Lower Security Track A54-0371 Glass Deduction = 1.4375 .5469 .50
Smart Lock components located on previous page
52
SLIDE TRACK SYSTEMS
ECONOMY SYSTEM
Economy Slide Track System Components
Available in clear satin, bright gold, bright chrome, and dark bronze finishes in 12 lengths. Each part is sold separately and most products are individually plastic sleeved.
A54-0154 1.1875 F93-0110 .563 .50 Plastic Guide for Upper Track F93-0110 NEW
Glass
Upper Slide Track or Vertical Upright A54-0154
.420
A54-0065 .438 1.610 F93-0105 1.0 .156
A54-0063 .3125 Shoe A54-0065 .280 Large Locking Shoe A52-6668

NEW
A54-0063 Glass Deduction = 1.25 .25
1.1875
.50
Lower Slide Track A54-0063 Glass Deduction = 1.25
1.0625
.3125 Locking Shoe A52-6303
Wheels for use with A52-6303 Only Roller With Nylon Wheel F93-2050 Roller With Steel Ball Bearing Wheel F93-2055
Use wheel with A54-0065 only Nylon Wheel F93-0100 Steel Wheel F93-0105 Steel Ball Bearing Wheel F93-0106
53
SLIDE TRACK SYSTEMS
STANDARD SYSTEM
Standard Slide Track System Components
Available in clear satin, bright gold, bright chrome, and dark bronze finishes in 12 lengths. Each part is sold separately and most products are individually plastic sleeved.
A54-0154 F93-0110 .8125 .50 .50 .563 1.1875
1.1875
.50
Glass
Deep Double Channel A54-0256 1.0
Upper Slide Track or Vertical Upright A54-0154
A54-0065
.875
.432
NEW
Plastic Guide for Upper Track F93-0110 .420
F93-0105
NEW
Showcase Header A53-7532 .438
A54-0067 1.0 1.610 .156 A54-0067 Glass Deduction = 1.25 .3125 Shoe A54-0065 1.188 .50 .262 .469 .625 Bottom Slide Track A54-0067 Add On Bottom Track For Triple Bypass System A50-8525 1.0625 .562 .50
NEW
.280
Large Locking Shoe A52-6668 .50
.3125 Locking Shoe A52-6303 Use wheel with A52-6303 Only Roller With Nylon Wheel F93-2050 Roller With Steel Ball Bearing Wheel F93-2055 Use wheel with A54-0065 only Nylon Wheel F93-0100 Steel Wheel F93-0105 Steel Ball Bearing Wheel F93-0106
.4844
.4688
.281
Single Track Bottom Inserts A52-0049
54
FIXTURE PRODUCTS / MISC. TRIMS
Price Tag Moldings Half Ovals Edge Moldings T Moldings Toilet Partitions/ Brackets
As a leading manufacturer of retail fixtures and displays, we rely on vendors to provide quality products on time. Morse Industries is very proactive. They keep us informed of ship gimes and get products to us when we need them.
Synsor Corporation synsor.com
Continuous Hinges Stamped Hinges
55
PRICE TAG MOLDINGS

Aluminum Moldings
Drilled and countersunk for #8 screws on 6 centers. Available in clear satin, mill finish, satin gold, black and white in 12 lengths. Individually plastic sleeved for protection. Most items special order unless noted as stock.
1.375
1.1875
3.550 A50-0154 For 1 1/4 tags stock item A50-0654 For 1 1/4 tags
.0938
1.0
1.375 1.0
1.1719
.165 A50-0155 For assorted tag sizes
A50-0153 For 1 tags A50-0124 For 1 1/4 tags
Vinyl
Available in black and white in 12 lengths, mill run, special order.
1.375
V25-7865 For 1 1/4 tags
56
HALF OVALS
Aluminum Half Ovals with Concave Backs
Drilled and countersunk for #6 screws on 6 centers. Available with polished clear finish in 12 lengths. Most items are special order unless noted as stock.
.25 .1875 .1719 .1719
.50
.75
1.0
1.50
A51-0102 A51-0104 stock item A51-0106 stock item
A51-0109
Aluminum Half Ovals with Solid Backs

Drilled and countersunk for #6 screws on 6 centers. Available with polished clear finish in 12 lengths.
.1563 .1875
3/4
A50-0195
A50-0197
Rigid Vinyl Ovals with Solid Backs

Available in black.
.840 .600 .400 .860
1.010
1.500
1.900
2.500
V21-0460 V21-0456 V21-0457 V21-0458
57
EDGE MOLDINGS
Aluminum Overlaps
Drilled and countersunk for #6 screws on 6 centers. Available with a polished clear anodized finish in 12 lengths. Most items are special order unless noted as stock.
.75
1.0
.3594 A11-0151
.4688 A11-0152
Aluminum Edge Moldings

Drilled and countersunk for #6 screws on 6 centers. Available with a polished clear finish in 12 lengths. Most items are special order unless noted as stock.
.25 .3125 A50-0271 .25 .25 .25 .25 .25 .25 .25
.50
.25
.625
.75
.8125
.875
A50-0272 A50-0273 stock item A50-0275 stock item A50-0274
1.0625
1.25
.5469
A51-0144 #6 screws stock item .5469
A51-0145 A50-0276
.7188
1.50 1.0 .8125
1.50
.25 A50-0326 stock item A51-0158
A50-0328 stock item
A50-0226
Rigid Vinyl Corner Guards

Available in a variety of colors. Most items are special order unless noted as stock.
.570
.810
.255 V25-9124 .280 V25-0758 .840 .400 V25-0474 .840 V25-0240 .980 V25-3604 1.110 1.200
1.450
1.500
.300 V25-2019
1.500 V25-0870
58
T-MOLDINGS
T-Moldings
Available in polished clear finish in 12 lengths. Mill run, special order.
.8125
.75
.50
.375
.625
.875
A50-0569
A50-0375
A50-0300
1.0
1.125
.6875
.7031
A50-0305
A50-0304
59
TOILET PARTITION HEADERS AND divider bracKets

Commercial Restroom Partition Header - Special Order
Available in satin finish. Mill run, special order.
1.282
1.172 1.062
1.426 2.75
1.266 A40-0300 .209 1.39 1.281 A42-0307 1.119
.875
1.266 A40-0301
Divider Brackets - Special Order

Available in satin finish. Mill run, special order.
.525 .525
1.250
2.50
.775 A40-5188
3.25 A40-5192
60
HINGES
Continuous Hinges
Aluminum Hinges
All Aluminum Hinges are mill finish 72 lengths, .060 gauge with 3/16 holes punched on 2 centers. Undrilled and other styles and sizes are available on request. *H11-4506D72 is a formed boat seat hinge drilled 3/16 hole with 2 staggered 1 double offset.
Part Number Open Width
H11-2006D72 H11-3006D72 H11-4506D72*
2 3 2 1/2
H11-2006D72
H11-4506D72
Aluminum Offset Hinge 72

Mill finish, drilled.
Part Number Description
H11-3014D72
1X2.250
Stainless Steel Hinges

Part Number Open Width Fastener Size Holes
H11-3014D72
All Stainless Steel Hinges are Type 304, 72 lengths with .040 gauge, drilled and countersunk on 2 centers. Other styles and sizes are available on request.
H14-0034P72 H14-0116A72 H14-0114A72 H14-0112A72 H14-0200A72
3/4 1 1/16 1 1/4 1 1/2 2
#4 #5 #5 #6 #6
Opposing Opposing Staggered Staggered Opposing
H14-0116A72
H14-0200A72
61
HINGES
Stamped Stainless
Unless otherwise specified, Stamped Stainless Hinges are type 304 electro-polished and drilled and countersunk for #8 fasteners.
Butt Hinges
* H20-0300 drilled and countersunk for #10 fasteners.
Part Number Open Width Pin Length Gauge
H20-0112 H20-0200 H20-0230 H21-0132 H20-0300*
1 1/2 2 2 1 5/16 3
2 2 3 1 1/2 3
.060 .060 .060 .060 .060
H20-0230
Offset Butt Hinges

Part Number Open Width Pin Length Gauge Offset
H21-0133 H20-0213
1 5/16 2 3/16
1 1/2 2
.060 .060
3/8 1/2
H21-0133
H20-0213
Bi-Fold Door Hinges

* H20-0320 comes with nylon washers and drilled and countersunk for #10 fasteners.
Part Number Open Width Pin Length Gauge
H20-0310 H20-0320*
2 5/16 2
3 7/16 4
.060 .090
H20-0320
62
CUSTOM CAPABILITIES
As a manufacturer of marker boards, chalk boards, shower doors and mirrors, we are always looking for innovative solutions for our design needs. Morse Industries is very responsive in providing these solutions from the creation of our custom dies through delivery of our nished extrusions.
Venus Manufacturing venusmfg.com
CUSTOM CAPABILITIES
Aluminum Extrusions Vinyl Extrusions Stainless Cast Fittings Stainless & Aluminum Fabrication Injection Molded Nylon Hardware CNC Aluminum Fabrication
1.800.325.7513
63
CUSTOM CAPABILITIES
64
ALUMINUM eXtRusion
Custom Capabilities
Morse Industries provides a total solution for your extrusion needs. We help you engineer your designs, create dies and extrude aluminum products to your specications. Unlike other extruders, we have the ability to manage the inventory of your finished products in one of our warehouses for just-in-time delivery.
Aluminum Extrusions
Our goal is to give our customers a feel for what is required to have a custom prole produced. Lead times must be calculated after all factors are considered.
Alloys
The most common alloys we provide are 6063, 6463, 6061 and 6005. Common tempers include T1, T4, T5, T6 and T832. Temper numbers indicate the age hardening of aluminum.
Finishes and Coatings
We offer the following colors (polished bright chrome, bright chrome, polished bright gold, bright gold, clear satin, mill nish, dark bronze, oil rub bronze, oil rub bronze metallic, brushed nickel, black and white). Anodized clear and bright dip. Anodized two-step hard coat. Color tinting. Electro-static wet paint. Powder coat. Mill nish, as extruded. Bufng, brushing and texturing.
Fabrication
Cutting to length (+/ 1/16 standard). Drill and countersink. Punching and slotting. Drilling and tapping. Notching. Angle cuts. Stamping.
Packaging
Cardboard carton or tubes. Spiral wrap (carton or pallet). Single poly sleeve. Paper interleaves. Heated shrink-wrap.
tel 1.800.325.7513
fax 1.800.411.8226
VINYL EXTRUSIONS
Custom Capabilities
Morse Industries provides a total solution for your extrusion needs. We can help you engineer your designs, create dies and extrude vinyl products to your specications. Unlike other extruders, we have the ability to manage the inventory of your finished products in one of our warehouses for just-in-time delivery.
CUSTOM CAPABILITIES
Vinyl Extrusions
Our goal is to give our customers a feel for what is required to have a custom prole produced. Lead times must be calculated after all factors are considered.
Material and Finishing
Three basic material styles include rigid, semi-rigid and exible compounds (or a combination known as co-extrusions). Materials come in several grades including interior and exterior pvc. Can be run in almost any color or color matched. Finishes range from high gloss, semi-gloss, to flat. The durometer of the vinyl indicates the softness or hardness of the extrusion.
Packaging
Cardboard cartons and tubes. Reels or coils.
tel 1.800.325.7513
fax 1.800.411.8226
65
CUSTOM CAPABILITIES
66
FITTINGS / HARDWARE / FABRICATION

Custom Capabilities
Stainless Cast Fittings
Morse Industries can help you create superior quality fittings made from 316 marine grade stainless steel. Fittings are manufactured at a state-of-the-art foundry with every run tested for quality and workmanship. Each fitting is hand-polished and passivated to insure a beautiful, bright nish and long life in tough outdoor environments.
Fabrication Stainless and Aluminum

Morse Industries can help you create superior quality metal hardware components for a wide range of applications including hinges, vents, brackets and housings. Parts can be tapped, assembled, attened or coined as part of the process.
Value Added Custom Fabrication, Assembly and Packaging
Let us save you money by eliminating the costly labor necessary when doing your own fabrication. Our vendors have capabilities ranging from punching, slotting, drilling, CNC, welding, bending and more. Morse can be your one stop shop for fabrication, assembly and packaging through our Value Added program. We will make the product, fabricate it to your specications, source any additional items needed for the kit, assemble the contents and package it in such a way that you need only ship it to your customers. Our staff is there to assist you every step of the way.
Injection Molded Nylon Hardware

Morse Industries creates custom molds to your specifications. From the initial sketch through manufacturing and delivery of your plastic components, Morse Industries will manage the entire process.
Material and Finishing Fabrication
Most common materials used are 66 military nylon and delrin plastic. Can be run in any color or color-matched. Drilling. Countersinking. Tapping.
CNC Aluminum Fabrication

Morse Industries Computer Numerical Control (CNC) fabrication capabilities include laser cutting, punching and brake forming. The process offers exibility for manufacturing runs in low volumes, often without the high costs associated with other processes. Common Uses Many new parts can be prototyped using CNC to test product viability. Then high volume production can be turned over to casting, stamping or injection molding. CNC also can be used to provide secondary fabrication to cast, stamped or injection molded products to further enhance their complex nature.
tel 1.800.325.7513
fax 1.800.411.8226
REFERENCE MATERIALS
REFERENCE MATERIALS
Shipping and Claims Terms and Conditions Shower Door Hinge Warranty Decimal and Equivalents
Please visit our website at www.morseindustries.com for additional reference materials.
67
REFERENCE MATERIALS
68
SHIPPING & CLAIMS

Shipping and Claims Policies
Getting orders to our customers on time is a high priority at Morse Industries. We inspect all products and packaging to ensure orders reach customers in good condition. Please provide specic shipping instructions at the time of order. Without specic shipping instructions, Morse Industries will choose what we believe is the best route of transportation.
Shipping Damage or Loss:
After the carrier assumes the product from Morse Industries, we are not responsible for any damage, delay or loss of the product. The carrier is responsible for any shipment damage, delay or loss in transit. Please inspect your shipments carefully at the time of delivery. If damage or shortage is visible, note such on the carrier delivery receipt and have the driver sign the receipt. Morse Industries will assist customers with the tracking of shipments and investigating reasons for damage or loss of product, but will assume no responsibility for said damage or loss.
Concealed Damage:
In the event of concealed damage or loss, contact the carrier in writing within 10 days of receipt of the product and request an inspection. Retain the container and all packing material for the carriers inspection.
Shortages and Miss-Shipments:
Report all shortages or miss-ships to Morse Industries within 7 days after receipt of the product. Approval from Morse Industries must be secured prior to returning any merchandise for credit.
Returns:
Morse Industries requires an RMA approval for all returns and a 20% restocking fee is assessed. Special order items are nonreturnable. All returns must be returned to Morse Industries in original condition within 30 days after approval in accordance to our shipping instructions.
Minimums:
There is a minimum order charge of $200 and truck deliveries are subject to our delivery schedule.
Terms:
Normal terms of net 30 days are granted to customers meeting our credit requirements. If you are interested in securing credit terms, please contact Morse Industries for a credit application. We will gladly ship products C.O.D. but we also accept Visa or Mastercard.
Prices:
Prices are subject to change without notification. Please confirm current pricing when placing your order.
tel 1.800.325.7513
fax 1.800.411.8226
Morse Industries TERMS, CONDITIONS OF SALE AND LIMITED WARRANTY 1. This Is Entire Agreement. This Invoice constitutes the entire agreement between Morse Industries (Morse) and the Buyer, and it is a complete merger of all prior negotiations and agreements as to the products sold to Buyer by Morse listed on this Invoice. This Invoice supersedes any prior or contemporaneous oral, written or implied agreements about the products listed on this Invoice. 2. Buyers Acceptance of Terms. Buyers acceptance of these Terms, Conditions of Sale and Limited Warranty (collectively, the Terms) will be indicated by: (1) Accepting the products delivered, or (2) failing to notify Morse within three days of delivery of any objection to the Terms. Unless buyer explicitly rejects all Terms or explicitly objects to specific terms, any contrary term contained in any document submitted by Buyer shall not be construed as a rejection; and Buyers acceptance of products or failure to notify Morse explicitly of such a rejection or objection shall constitute acceptance of the Terms by Buyer. 3. Warranty Covers Only Specified Intended Uses. Morse standard products are warranted for the intended uses specified in current Morse product descriptions, brochures and catalogs (including, but not limited to, catalogs for marine products and architectural products). Regularly stocked standard products not included in Morse product descriptions, brochures or catalogs are warranted only for normal uses of such products in the ordinary course. Morse products that are custom-made to Buyers specifications are warranted only for the intended uses as specified in writing in the specification included with this Invoice. There is no warranty for unintended uses, or for products damaged by misuse, unreasonable or improper use, accident, improper installation or fabrication, unauthorized modifications or repairs, lack of proper cleaning or maintenance, normal wear and tear, or other causes not due solely to defects in materials or workmanship. Buyer warrants that it alone has selected the products to be furnished by Morse hereunder and stipulates that it is not relying on Morses skill or judgment to select such products. Buyers of custom-made products additionally warrant that they alone have selected the products to be furnished by Morse hereunder and stipulate that they are not relying on Morses skill or judgment to select such products. 4. Morse Limited Warranty. a. Conformity with Specifications. Morse warrants that its standard products conform to the specifications included in current Morse product descriptions, brochures and catalogs (dimensions, materials and tested capacities) within industry-standard tolerances. As to custom-made products and standard or regularly stocked products altered by Morse at Buyers direction, Morse warrants that such products also conform (within industry-standard tolerances) to the written specifications included with this Invoice. b. Freedom from Defects. Further, Morse warrants that its products will be free from defects in materials and workmanship, under normal use and service, for a period of one year from the invoice date. c. Warranty Applies Only to Buyer. This limited warranty applies only to the Buyer, not to any remote consumers or any other persons or entities other than the Buyer. d. Sole Remedy is Replacement of Defective Product. Buyers sole remedy under the limited warranty is replacement without charge of the defective product, as more fully detailed below. When the return of defective products is authorized by Morse, it will reimburse Buyer for the cost of standard shipping to return defective products to Morse, and it will ship replacement products to Buyer at Morses expense. Any expenses involved in the removal or reinstallation of defective products are not covered by this warranty. e. Morse Limited Warranty Defined. The above provisions (sub-paragraphs a-d) are referred to hereafter as the Morse Limited Warranty. Except for the MORSE Limited Warranty stated above, Morse makes no Other express or implied warranties or representations. The MORSE Limited Warranty does not include a warranty of merchantability or fitness for a particular purpose, and the duration of any such warranty of merchantability or fitness for a particular purpose that may be imposed by law shall be the same as the Morse Limited Warranty and totally excluded thereafter. Some states in the United States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state. 5. Morse Limited Warranty Excludes Consequential Damages. The replacement of defective PRODUCTS, as DETAILed below, shall be the sole remedy for the buyer and the sole liability of Morse for any breach of warranty. under aLL circumstances, Morse shall not be liable for the loss of time, loss of use, costs to remove or replace PRODUCTS, EXPEDITED shipping costs, inconvenience or other incidental, consequential or indirect damages, including, but not limited to, loss or damage to other personal property or loss of revenue, allegedly caused by a defective Morse product. Some states in the United States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. The Morse Limited Warranty gives you specific legal rights, and you may also have other rights that vary from state to state. 6. Replacement Products Covered for Balance of One-Year Warranty Period. If allegedly defective products are returned to Morse and replaced under the Morse Limited Warranty, they shall become the property of Morse. The replacement of products will not extend the term of the warranty, but the replaced product will be covered for the balance of the original warranty period. 7. Any Product Return Must Have Prior Return Authorization. a. Non-Defective Products: Morse will accept returns of standard, non-defective products only in as-originally-shipped condition. Morse will not accept returns of non-defective products that are custom-made, altered by Morse to Buyers specifications, altered by Buyer, or not currently stocked by Morse. Such returns require a return merchandise authorization and are subject to a 20% re-stocking charge; otherwise, the returned products will be re-shipped to the Buyer at the Buyers expense. b. Defective Products: Credit for defective products will not be issued without Morses return authorization. To obtain authorization, return requests must be mailed, faxed or e-mailed to our offices, and they must include an itemized list of products to be returned, the reasons for return, and the date and number of the Morse invoice. 8. No Duty to Upgrade. Morse reserves the right to improve its products through changes in design, materials or manufacturing processes, without being obligated to incorporate such changes in products previously manufactured by it, or to notify Buyers or subsequent users of its previously manufactured products of such later changes. 9. Warranty Dispute Procedures. Any court action concerning the Terms, including, but not limited to, the Morse Limited Warranty, must be filed in the courts located in King County, Washington, the laws of which (excluding its choice of law rules) shall be applied to any claim arising under the Terms, including, but not limited to, the Morse Limited Warranty. Should the court determine that Morse was the substantially prevailing party, Buyer agrees to reimburse Morse for its reasonable expenses, including attorneys and experts fees, incurred in defending against Buyers claims.
REFERENCE MATERIALS
tel 1.800.325.7513
fax 1.800.411.8226
69
REFERENCE MATERIALS
70
limited warrantY
Shower Door Hinges Limited Warranty
Morse Industries warrants that for a period of three (3) years following the date of sale to Morse Industries customer, our shower door hinges are warranted against material defects and defects in workmanship. All warranty claims are subject to inspection by Morse Industries prior to providing a remedy for the warranty claim. This warranty will not apply if after inspection by Morse Industries, it is determined that the shower door hinges have been installed and maintained in a manner that is not in conformity with the instructions and guidelines set forth by Morse Industries for proper installation and maintenance. Morse Industries responsibility to provide a remedy under this warranty shall be limited to either a refund of the purchase price, or to provide a replacement of a shower door hinge. The refund or replacement shall constitute the limit of Morse Industries liability and obligation for any material defect or defect in workmanship in a shower door hinge. This warranty is exclusive, and Morse Industries makes no other warranty, express or implied, including without limitation, any implied warranty or merchantability or fitness for a particular purpose. In no event shall Morse Industries be liable under any legal theory (including but not limited to contract, negligence, strict liability in tort, or warranty of any kind) for any indirect, special, incidental, consequential, or exemplary damages (including but not limited to lost profits).
tel 1.800.325.7513
fax 1.800.411.8226
US Standard & Metric EQuiValents

Reference Materials
Fraction (inches) Decimal (inches) Millimeters (mm) Fraction (inches) Decimal (inches) Millimeters (mm)
REFERENCE MATERIALS
1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2
.015625 .03125 .046875 .0625 .078125 .09375 .109375 .125 .140625 .15625 .171875 .1875 .203125 .21875 .234375 .25 .265625 .28125 .296875 .3125 .328125 .34375 .359375 .375 .390625 .40625 .421895 .4375 .453125 .46875 .484375 .5
Foot Meter
0.39687 0.79374 1.19061 1.58748 1.98435 2.38123 2.77809 3.17497 3.57183 3.96871 4.36557 4.76245 5.15931 5.55620 5.95305 6.34994 6.74679 7.14368 7.54053 7.93743 8.33427 8.73117 9.12801 9.52491 9.92175 10.31865 10.71549 11.11240 11.50923 11.90614 12.30297 12.69988
33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1
.515625 .53123 .546875 .5625 .578125 .59375 .609375 .625 .640625 .65625 .671875 .6875 .703125 .71875 .734375 .750 .765645 .78125 .796875 .8125 .828125 .84375 .859375 .875 .890625 .90625 .921875 .9375 .953125 .96875 .984375 1.0
Foot Meter
13.09671 13.49362 13.89045 14.28737 14.68419 15.08111 15.47793 15/87485 16.27167 16.66859 17.06541 17.46234 17.85915 18.25608 18.65289 19.04982 19.44663 19.84356 20.24037 20.63731 21.03411 21.43105 21.82785 22.22479 22.62159 23.01853 23.41533 23.81228 24.20907 24.60602 25.00281 25.39977
2 4 6 8 10
.60960 1.21920 1.82880 2.43840 3.04800
12 14 16 18 20
3.65760 4.26720 4.87680 5.48640 6.09600
tel 1.800.325.7513
fax 1.800.411.8226
71
25 years of experience in the architectural industry Multiple distribution facilities across the United States Proven track record with major manufacturers and distributors National Glass Association member Professional Awning Manufacturers Association member
tel 1.800.325.7513
fax 1.800.411.8226

Morse Archcatalog

Uploaded by

Copyright:

Available Formats

Morse Archcatalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Morse Archcatalog

Uploaded by

Copyright:

Available Formats

NO.

On-Time Delivery Knowledgeable Staff Extensive Selection Custom Extrusions

FRAMELESS SHOWER PRODUCTS

ARCHITECTURAL TRIMS & EXTRUSIONS

SLIDE TRACK SYSTEMS

Smart Lock System Economy System Standard System

FIXTURE PRODUCTS / MISCELLANEOUS TRIMS

In House Design and Engineering

Just in Time Inventory

Your Partner in China and Beyond

Value Added Custom Fabrication, Assembly and Packaging

Visit MorseIndustries.com for:

FRAMELESS SHOWER U-CHANNELS, HEADERS ANd cONNEcTORS

.688 A52-0222 for 1/2 glass

Shower Headers, Snap In Filler & Flexible Vinyl Insert

.750 1.250 .56

A42-7479 Snap In Filler Insert

1.080 A42-7469 Header

V11-0030 Clear Vinyl Insert for 3/8 glass

B42-9796 Brass Wall Mount Anchor Set

B42-9797 90 Brass Corner Mount

B42-9798 135 Brass Corner Mount

B42-9799 Adjustable Brass Corner Mount

tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com

FRAMELESS SHOWER HINGES

Paladia Series Hinges

C50-0001 C50-0002 C50-0003

Each hinge includes gaskets, cutting template and fasteners

Roma Series Hinges

C50-0004 C50-0005 C50-0006

Each hinge includes gaskets, cutting template and fasteners

C50-0004 Maximum Capacity* 2 Hinges 3 Hinges

tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com

FRAMELESS SHOWER GLASS CLAMPS

Traditional Glass Clamps

Traditional Style Fixed Panel Clamp Oversized Fixed Panel Clamp

1 3/4 x 1 3/4 1 3/4 x 1 15/16

Each clamp includes neoprene gaskets and fasteners

Heavy Duty Hole-In-Glass Style Clamps

Each clamp includes neoprene gaskets and fasteners

tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com

FRAMELESS SHOWER TOWEL BARS ANd dOOR PuLLS

Towel Bar with Shower Door Pull Knob

C60-0020 C60-0021 C60-0022

Each handle includes an Allen wrench

Double Towel Bar

C60-0030 C60-0031 C60-0032

Each handle includes an Allen wrench

Back-to-Back Shower Door Pulls

Each handle includes an Allen wrench

tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com

FRAMELESS SHOWER PVc SEALS AND EDGE WIPES

Clear Multi Purpose H Wipe

Clear PVC Dual Seal and Wipe

Clear PVC Co-Extruded Bottom Wipe with Drip Rail

tel 1.800.325.7513 fax 1.800.411.8226 www.morseindustries.com

PanelGrip Dry Glaze Glass Railing System

Reduce Freight Costs up to 30%

Broadest Grip Range Of Any Dry Glaze Option

No Special Tools required