Presents:
Resistance Spot Welding
CMW Inc. 2006
Resistance Spot Welding Spot Welding is the process of joining two pieces of metal together by passing current through a relatively small area (spot) while applying pressure for a given amount of time. Spot Welding is used for resistance welding. Other welding methods are (Arc, Torch, MIG, & TIG).
Copyright CMW Inc. 2005
Resistance Spot Welding
A Spot welding system typically consists of a: cap or electrode that contacts the metal Holder that retains the cap or electrode Gun arm that retains the Holder Welding machine that thru a hydraulic cylinder, delivers pressure to the metal Controller that defines the weld cycle Transformer that steps the line power up to the welding power level Cooling chamber that keeps the water at a constant temperature that circulates thru the entire system to remove excess heat
3
Copyright CMW Inc. 2005
Resistance Spot Welding
There are three standard types of Spot Welding systems Base Type #1 Robotic or Cell Type #2 Portable Type #3 Each has its advantage based on volume, accessibility, operational repeatability
Copyright CMW Inc. 2005
Type # 2 Type # 1
Type # 3
Resistance Spot Welding The portion of the Spot Welding system that makes direct contact with the metal are the Caps (Tips) or Electrodes. These items are generally referred to as Consumables as they actually erode away during the welding process and must be periodically replaced.
Copyright CMW Inc. 2005
Resistance Spot Welding
Based primarily on volume, the user will either use Caps or Electrodes. Both Caps and Electrodes can be reconditioned or redressed to near their original shape for extended life. Electrodes can be redressed more times than Caps but ultimately more copper is thrown away. Caps, when used with a Shank, can be both reconditioned and ultimately disposed of with less waste of copper
Copyright CMW Inc. 2005
Resistance Spot Welding Cap or Electrode noses are available in a variety of shapes and are specified based on the type of metal that is to be welded, the spot desired and customer preference.
POINTED DOME
FLAT OFFSET
TRUNCATED
RADIUS
Copyright CMW Inc. 2005
Resistance Spot Welding The anatomy of a Cap/Electrode is as shown on the right. The Face comes in direct contact with the metal and largely determines the size of the spot. The Taper is precisely manufactured to allow a water tight seal between mating parts. The Shaft is varied in length and configuration to align the Face to the metal
Copyright CMW Inc. 2005
TAPER
SHAFT
NOSE FACE
Resistance Spot Welding Electrodes and Shanks can be supplied with or with out water tubes. The purpose of the water tube is to better focus the cooling water flowing on the system at the point where the heat is being generated at the weld face.
Copyright CMW Inc. 2005
Resistance Spot Welding
Caps and Electrodes are available in industry standard (RWMA) tapers to provide a water tight seal between the cap, shank and holder or between the Electrode and Holder. Typical tapers are 4, 5, 6, & 7. The taper used is based on the current and pressure required for a given weld. The higher the current/pressure, the larger (the taper number) taper will be used. Caps, Electrodes and Shanks are available in either Male or Female configurations
Copyright CMW Inc. 2005
10
Resistance Spot Welding
Electrodes and Shanks are available in a number of configurations to allow the Face of the Cap/Electrode to come in direct flat contact with the metal.
Copyright CMW Inc. 2005
11
Resistance Spot Welding
Electrodes are also available in a number of special configurations for specific applications
Copyright CMW Inc. 2005
12
Resistance Spot Welding
Electrodes are also available in a number of special configurations for specific applications
13
Resistance Spot Welding Single Bend or Double Bend Electrodes can be specified by Overall Length (C), Offset (D), and Nose Length (N), to allow easy access for spot welding in a tight area. Various holder configurations can also add even more flexibility to allow you a spot weld in a tight position.
Copyright CMW Inc. 2005
14
Resistance Spot Welding
Caps/Electrodes can be specified in three basic materials based on the material to be welded. (see the weld chart)
Copyright CMW Inc. 2005
15
Resistance Spot Welding Holders are available in a number of configurations that include (in addition to Taper options): Straight (of various lengths and diameters) Offset (of various offsets)
100 Series (Non-Ejector) Water Cooled Electrode Holder 200 Series (Ejector) Water Cooled Electrode Holder
300 Series Premium (Ejector) Water Cooled Electrode Holder
Copyright CMW Inc. 2005
16
Resistance Spot Welding
Holders can have a mechanical assist (knock out button) to remove the worn Cap/Electrode from the Holder
Copyright CMW Inc. 2005
17
Resistance Spot Welding
What to look for to find Spot Welding Customers:
Uses Sheet metal in their product
Appliances Automotive and Transportation Filing Cabinets Computer and other Electronic Chassis
Manufactures shelving made of wire rods welded together (typically at 90) as in Appliance shelving Manufactures a container (Tank, Barrel, or Vessel) that has welded seams (Seam Welding)
Copyright CMW Inc. 2005
18
Resistance Spot Welding
Shown on the right are products which are used to Sharpen or Redress Caps or Electrode
This purpose is to Use Redressing tools as shown
Pneumatic Power Handle Electrode Dresser
Electrode Dresser With abrasive cloth
Electrode Dresser
Copyright CMW Inc. 2005
19
Resistance Spot Welding While there are a number of variables that must be controlled to obtain a good weld, the most important are
(after the selection of the correct components and Welding system)
The current settings on the transformer The timing of the weld (clamping, welding, and holding) Water flow These variable can be selected by using the Weld Tables as supplied by the Manufacture of the Welding Components or System or referring to the RWMA website (www.RWMA.org)
Copyright CMW Inc. 2005
20
Resistance Spot Welding
A good Spot is stronger and more energy efficient.
Copyright CMW Inc. 2005
21
Go to Troubleshooting Guide
22
Resistance Spot Welding
Copyright CMW Inc. 2005
23
Resistance Spot Welding
Visit us at www.cmwinc.com for more spot welding information and product line types.
Copyright CMW Inc. 2005
24
Resistance Spot Welding 101
Copyright CMW Inc. 2005
25
