Scribd
Upload
23 views2 pages

Laboratorio de Instrumentación Industrial Práctica: 8: Escuela Politécnica Nacional

This document provides instructions for creating a Piping and Instrumentation Diagram (P&ID) using Microsoft Visio. It describes how to add major equipment, pipelines, valves, and instruments to the diagram. It also discusses how to position and connect components, add tags and property data, and generate reports. The objective is to train students to interpret and develop P&IDs. As preparatory work, students are asked to summarize P&ID standards and describe the process in an annex. Then using Visio, students will create a P&ID for the annex process and submit a lab report with the completed diagram, descriptions, recommendations, and conclusions.

Uploaded by

Henry Cocha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views2 pages

Laboratorio de Instrumentación Industrial Práctica: 8: Escuela Politécnica Nacional

This document provides instructions for creating a Piping and Instrumentation Diagram (P&ID) using Microsoft Visio. It describes how to add major equipment, pipelines, valves, and instruments to the diagram. It also discusses how to position and connect components, add tags and property data, and generate reports. The objective is to train students to interpret and develop P&IDs. As preparatory work, students are asked to summarize P&ID standards and describe the process in an annex. Then using Visio, students will create a P&ID for the annex process and submit a lab report with the completed diagram, descriptions, recommendations, and conclusions.

Uploaded by

Henry Cocha
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ESCUELA POLITCNICA NACIONAL ELECTRNICA Y CONTROL

LABORATORIO DE INSTRUMENTACIN INDUSTRIAL PRCTICA: 8


TEMA: Piping & Instrumentation Diagram (P&ID) OBJETIVO: Adiestrar al estudiante en la interpretacin y elaboracin de diagramas P&IDs. TEORIA Create a P&ID VISIO 1. On the File menu, point to New, point to Process Engineering, and then click one of the following: Piping and Instrumentation Diagram Process Flow Diagram 2. Position major equipment shapes on your drawing. From Equipment, drag equipment shapes onto the drawing page. An intelligent tag number for each component appears on the diagram. 3. Use pipelines to connect major equipment. The endpoint of the pipeline turns red to indicate that it is connected (glued) to the equipment shape, and a connection point is created if one did not exist. Styles control the thickness of the line, directional arrows, and other graphic symbols that indicate the type of pipe or instrument line. Tip you can also use the Connector tool to draw pipelines. This method is particularly useful when you work in large diagrams that have many connections. Click the Connector tool, and then on Pipelines, click the pipeline shape you want to use. Then draw the pipeline in your diagram. To change the type of pipeline, simply click a different pipeline shape on Pipelines and continue working in your diagram. 1. Add valve shapes. When a valve is added to the pipeline: When a valve is deleted, a single pipeline replaces the split pipeline. 2. Add instrument shapes. From Instruments, drag instrument shapes onto the drawing page near the pipeline, valve, or equipment they monitor. 3. Reposition shapes in the diagram by dragging them. 4. Add data to components. You can also create and apply property sets. Add data to components Create and apply property sets 5. Renumber components. 1 JMF

ESCUELA POLITCNICA NACIONAL ELECTRNICA Y CONTROL


By default, all tag formats are selected. 6. Generate lists or bills of materials of equipment, pipelines, valves, and instruments. The following steps create a report definition that filters out duplicate process engineering shapes and reports on process engineering components.

TRABAJO PREPARATORIO 1. Realizar un resumen de las Normas ISA S5.1 - S5.3. 2. Describir el funcionamiento del proceso indicado en el anexo1.

PROCEDIMIENTO Usando Visio realizar el P&ID del Anexo 1.

INFORME El informe se entregar en la sesin de laboratorio siguiente y deber contener: 1. Una descripcin de lo efectuado durante la prctica y el P&ID terminado. 2. Recomendaciones. 3. Conclusiones

JMF

You might also like