SPEEDFAXTM 2011 Contents

Power Distributions Solutions Introduction

Power Monitoring

Power Monitoring Systems Overview Intelligent Metering and Control Devices Power Meters PAC3100 PAC3200 PAC4200 9340 / 9360 9510 / 9610 9510 RTU Advanced Data Recorder Enclosed Meters Branch Circuit Monitoring / Embedded Metering Low Voltage Current Transformers Energy Management Software Powermanager Software WinPM.net Software Application Engineering Application Engineering Services

9-2 9-3 9-4 9-5 9-6 9-7 9-8 9-9 9-10 9-11 9-12 9-13 9-14 9-15 9-16 9-17 9-18
Powermanager Software WinPM.net Software

Siemens recognizes that high performance facilities make for high performance business. Energy is the lifeline of your business, and better efficiency and sustainability can have a large positive impact on your bottom line. Energy Management and Control Systems from Siemens are complete enterprise solutions that help you manage the energy costs and availability of your business. With our advanced meters and controls, you can be sure to use only the energy you need, when you need it. Siemens Power Distribution Solutions contribute toward achieving LEED certification and provides the needed energy metering data for federal/local government energy reductions programs.

Assembled Meter Enclosure

Features and Benefits of Siemens Power Distribution Solutions:

n Power

Quality Reliability & Analysis Cost Allocation & Billing n Utilities Usage Aggregation n Load Preservation n Equipment Monitoring n Facility Monitoring & Automation n Sequence of Event Recording n Preventative Maintenance n Electrical Asset Management
n Utilities

Additional Products/Services Available: n Branch Circuit Monitoring n Sub-Billing and Cost Allocation n Application Engineering n Services Agreements n Network/Communication Components n Integration with Existing n SCADA/BAS Systems n Incorporation of Third Party Devices

9
POWER MONITORING

Power Meters

For Technical Assistance Contact: 1-800-333-7421 Online Support: www.siemens.com/ automation/ support-request For The Latest Information Go To: www.usa.siemens.com/pds

Residential L Commercial L Industrial

Totally Integrated Power

System Overview
General

1.  Power Meters Siemens power monitors combine the best of new technologies and proven practices. Monitor critical loads, power quality, and demand via the web directly from the meters. 2.  Power Monitoring Software WinPM.Net and Powermanager web-enabled software facilitates easy, enterprise-wide connection to power monitoring equipment, circuit breakers, and other devices from Siemens and third parties. Access information via the web with unlimited no-cost clients using built-in WebReachTM via your web browser. 3.  Communications Networks Utilize existing Ethernet or RS-485 communications networks to extract the information you need and get it where it needs to go. 4.  Components Current Transformers (CTs), Voltage/Potential Transformers (PTs), Power Supplies, Ethernet Switches, Protocol Converters. Siemens can provide everything required for your system. 5.  Intelligent I/O Our S7 I/O enables plug-n-play communications with Modbus devices and expands digital and analog input and output functionality of Siemens Systems. 6.  Billing and Load Allocation Software Powermanager is the simplified solution for cost allocation, billing & load/demand analysis using your web browser.

7.  Engineering Services PDS Application Engineers can help from design through commissioning of even the most demanding power quality and monitoring systems. 8.  Motor Control Centers Monitor mains and feeders for critical or power-intensive loads. Communicate with WL and VL breakers, SIMOCODE, I/O and devices from other manufacturers. Use Siemens power meters to web-enable new as well as existing MCCs. 9.  Low & Medium Voltage Switchgear Web-enable switchgear by having Siemens power monitoring as well as breaker status and upload the information to a corporate Intranet or to the Internet. Use MeterMailTM directly from meters for alarm conditions or simple reporting. 10.  Facility Management Systems Tie into building automation systems to provide the required power and energy information. Many communications options are available ranging from legacy protocols to XML directly from the power monitors. 11.  Distributed Control Systems, Automation, and SCADA/Human Machine Interface Siemens power monitors and/or software can talk to all major vendors systems.

POWER MONITORING

9-2

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

Power Distribution Solutions

Intelligent Metering and Control Devices

PAC3100 Power, energy and demand

Voltage/current: per phase, average Voltage/current: unbalance Power: real (kW), reactive (kVAR), apparent (kVA), power factor, frequency (Hz) Energy (kWh): bi-directional, import, export Energy (kWh): total, net Demand: block, sliding window Demand: thermal predicted n n n n n n

PAC3200
n n n n n

PAC4200
n n n n n n

9340
n n n n n n n

9360
n n n n n n n n

9510 ADR

9510
n n n n n n n n

9610/9610H
n n n n n n n n n 17 s @ 60 Hz, (20 s @ 50 Hz) 127th/256th 512/1024 n n n n n n 800 n

Power quality analysis

Sag/swell monitoring Symmetrical components: zero, negative, positive Transient detection, microseconds Harmonics (individual, even, odd, total) up to Sampling rate, maximum samples/cycle Flicker, harmonics to EN50160, IEC 6100-4-7 / 4-15 Congurable for IEEE 519-1992, IEEE 1159, SEMI/ITIC Number of nines uptime data (3 nines=99.9%) 64 THD only 64 31st 170 31st 128 n

63rd 128 n

63rd 256

n n n n 3 n n

n n n n 800 n

Data and waveform logs

Triggered by setpoint, schedule, or external signal Sequence-of-event logs, variable log depth Minimum/maximum logs Historical logs / maximum # of channels Waveform recording Time-stamps, resolution in seconds Event Log GPS time synchronization n n 1 n n 1

800

0.1
n n n

0.1
n n

0.001
n n 1 2 (1) 1 (1)

0.001
n n 1 2 (1) 1 (1) n n n n n (2) n n n (4) (4) 8/8 7 cycle n n n n 0.2S n n n n n n n n

0.001
n n 1 2 (1) 1 (1) n n n n n (2) n n n (4) (4) 8/8 7

Communication ports & I/O ( ) = Optional

RS-232/485 ports RS-485-only ports Ethernet ports Infrared optical ports PROFIBUS DP, PROFINET ports IEC61850 & Comtrade Modbus RTU Slave on serial, modem or infrared ports (If equipped with modem or infrared port) Modbus RTU Master on serial ports Modbus/TCP on Ethernet ports DNP 3.0 on serial, modem, infrared ports Ethernet Gateway: 31 other meters accessible via RS-485 Multiple masters over Ethernet Email alarming On-board web server XML Analog inputs Analog outputs Digital status/counter inputs (standard/optional add-ons) Digital relay outputs (control/pulse) 1 (1) 1 (1) 1 (1) (1) 1 (1) (1) n n n n n n (2) n n n (4) (4) 8/8 7 cycle n n n 1 (1) 1 (1)

n n 3

n n (42) n n n (2) (2) 1 / (6) 1 / (2) n n n n n 0.5S

n n (42) n n n (2) (2) 1 / (6) 1 / (2) n n n n n 0.5S n

2 2

1 1 n and/or, > < n n

2 2 n and/or, > < n n

Setpoints, alarming and control

Setpoints, minimum response time Math, logic, trig, log, linearization formulas Single- and multi-condition alarms Call-out on alarm cycle n n n n 0.2S n n n n n n n n

9
POWER MONITORING

Revenue metering
ANSI C12.16 accuracy compliant ANSI C12.20 EN50160 IEC 60687 0.2S compliant IEC 60687 accuracy class 0.5S compliant ANSI class 10 (5A nominal, 10A max) ANSI class 2, IEC 1/10 (1A nominal, 10A max) ANSI class 20, IEC 5/20 (5A nominal, 20A max) MV-90 on serial; Ethernet ports Time-of-use Transformer/line loss compensation 1S 0.5S n n 0.2S n n n n

Some features are optional. Refer to datasheets for allowable port configurations. Products meet or exceed the accuracy requirements of the standards listed; due to form factors, not all ANSI/IEC compliance tests may apply. Some products certified by third-party laboratory.

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

9-3

Power Distribution Solutions

PAC3100 Power Meter
Basic Monitoring of Electrical Power Systems
The SENTRON PAC3100 is a powerful compact power monitoring device that is suitable for use in industrial, government and commercial applications, where basic metering and energy monitoring is required. The meter may be used as a stand alone device monitoring over 25 parameters or as part of an industrial control, building automation or global power monitoring system. Metering and monitoring applications range from simple analog volt and amp meter replacements to stand-alone sub-billing or cost allocation installations. The PAC3100 has many features not usually found in this price class of meters. A large graphical display supports multiple languages and easy to use menus that can be used to set up the meter. The meter also has built in Modbus RTU communications via a RS485 interface. The meter comes standard with two digital inputs and outputs. One output is suitable for pulse output for export/import real and reactive energy. The other output is controllable from an outside source by way of a Modbus register.

Precision
n n

Energy Management
n n n n n n

Reliability
Economical Measurement Commercial Industrial Residential n Degree of Protection Front IP65 Rear IP20 n 480V Connected Voltage n Simple Retrofit Installation n Integration with Existing Systems
n

ANSI C12.16 Class1s Energy Measurement Voltage +/- 1% Current +/- 1% Power Factor +/- 1% Sampling Rate 64/per cycle Revenue Accurate Sub Billing Cost Allocation Cost Effective

Energy Consumption Demand Control Automation Integration Solution for LEED credit Monitors Critical Equipment Sub Metering

MODBUS RTU

96 mm 3.78 in.

Terminal block for (2) Digital I/O

96 mm 3.78 in.

Full Graphic LCD Display to indicate: Display title or designation of the displayed measurements Phase Measured value Unit Labeling of function keys

Example of operating menu

With an easy-to-read adjustable back lit LCD display, the PAC3100 can be commissioned in only two steps. After selecting the language and setting two parameters (voltage and current inputs), the meter is ready for use.

Terminals for current and voltage

POWER MONITORING

Order information
Product SENTRON PAC3100 compression terminals AC/DC SENTRON Adapter Plate for 4700/4720 meter cutout SENTRON PAC32/4200 Meter DIN Rail adapter Meter display will not be seen Catalog Number

7KM3133-0BA00-3AA0 93-47ADAPTER 7KM9900-0YA00-0AA0

Languages included as standard in the meter are English, German, French, Spanish, Italian, Portuguese, Turkish, Russian and Chinese.

Omit dashes from part numbers when ordering except on 93-47ADAPTER.

9-4

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

Product Category PDS

Power Distribution Solutions

PAC3200 Power Meter
Reliable and Precise Monitoring of Electrical Power Systems
The SENTRON PAC3200 is a powerful compact power monitoring device that is suitable for use in industrial, government and commercial applications where basic metering and energy monitoring is required. The meter may be used as a stand alone device monitoring over 50 parameters or as part of an industrial control, building automation or global power monitoring system. Metering and monitoring applications range from simple analog volt and amp meter replacements to stand-alone sub billing or cost allocation installations with multiple tariffs. The PAC3200 provides open communications using Modbus RTU/TCP, PROFIBUS-DP, and PROFINET protocols for easy integration into any local or remote monitoring system. Simple configuration of the meter can be done from the front display.

Precision
n n

Energy Management
Energy Consumption Automation Integration n Solution for LEED credit n Monitors Critical Equipment n Modbus TCP/RTU n Industrial Systems PROFIBUS PROFINET
n n

Reliability
Economical Measurement Commercial Industrial Residential n Degree of Protection Front IP65 Rear IP20 n 600V Connected Voltage n Simple Retrofit Installation n Integration with Existing Systems
n

ANSI C12.20 Class 0.5s Energy Measurement Voltage +/- .3% Current +/- .3% Power Factor +/- .5% Sampling Rate 64/per cycle Total Harmonic Distortion (THD) Revenue Accurate Sub Billing Cost Allocation Cost Effective

Modbus TCP integrated into the meter as standard SENTRON PAC, PROFIBUS DP, MODBUS RTU and PROFINET expansion modules for remote data transmission

96 mm 3.78 in.

96 mm 3.78 in. Terminal blocks for voltage and current measuring, control power and digital input and output (available with compression terminals)

Full Graphic LCD Display to indicate: Display title or designation of the displayed measurements Phase Measured value Unit Labeling of function keys

Example of operating menu: The texts can be displayed in several languages, which can be selected directly on the device. The large graphic LCD display facilitates reading even from a distance. For optimum visability even in poor light conditions the PAC3200 comes with a gradually adjustable background illumination.

9
POWER MONITORING

Order information
Product SENTRON PAC3200 compression terminals not suitable for use with ring tongue terminals, AC/DC SENTRON PAC3200 compression terminals not suitable for use with ring tongue terminals, DC only SENTRON PAC PROFIBUS DP expansion module SENTRON PAC MODBUS RTU expansion module SENTRON PAC PROFINET expansion module Connector block suitable for use with ring tongue terminals SENTRON Adapter Plate for 4700/4720 meter cutout SITOP Power Supply AC 99-264VAC, 24 VDC, 0.5A SENTRON PAC3200/4200 Meter DIN Rail adapter Meter display will not be seen Catalog Number 7KM2112-0BA00-3AA0 7KM2111-1BA00-3AA0 7KM9300-0AB00-0AA0 7KM9300-0AM00-0AA0 7KM9300-0AE00-0AA0 Consult Siemens Sales 93-47ADAPTER 6EP1331-2BA10 7KM9900-0YA00-0AA0

Languages included as standard in the meter are English, German, French, Spanish, Italian, Portuguese, Turkish, Russian and Chinese. Omit dashes from part numbers when ordering except on 93-47ADAPTER.

Product Category PDS

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

9-5

Power Distribution Solutions

PAC4200 Power Meter
Reliable and Precise Monitoring of Electrical Power Systems
The SENTRON PAC4200 is a feature packed power monitoring device that is suitable for use in industrial, government and commercial applications where basic to advanced metering, logging, and I/O is required. The meter may be used as a stand alone device monitoring over 200 parameters or as part of an industrial control, building automation or global enterprise wide monitoring system. Advanced power quality monitoring and logging applications range from single low voltage breaker / building metering to sub-station main feeder monitoring, sub-billing or cost allocation installations with multiple tariffs. Whether your goal is to reduce operation cost, reduce your carbon footprint or to maintain your power assets, the PAC4200 meter should be an important part of your power monitoring system. The PAC4200 provides open communication using the standard built-in Ethernet Modbus TCP and has the capability of communicating through Optional Modbus RTU, PROFIBUSDP, and PROFINET protocol modules simultaneously. This allows for easy integration into any local or remote monitoring system. The gateway functionality of this device reduces installation cost by replacing other gateway devices and simplifying wiring.

Precision
n n

Energy Management
Serves two masters via the TCP connection n Energy Consumption n Min/Max and Event Logs Storage Capacity 40 days at 15 min intervals Event Logging 4000 events n Demand Control n Automation Integration n Modbus Gateway n Modbus TCP/RTU n Industrial Systems PROFIBUS PROFINET
n
MODBUS TCP integrated into the meter as standard

Reliability
n n

n n

ANSI C12.20 Class .2s Energy Measurement Voltage +/- .2% Current +/- .2% Power Factor +/- .5% Sampling Rate 170/per cycle Individual Harmonics up to 31st Power Quality Revenue Accurate Sub Billing Cost Allocation Cost Effective

n n n n n

Monitors Critical Equipment Economical Measurement Commercial Industrial Degree of Protection Front IP65 Rear IP20 600V Connected Voltage Customizable Displays Simple Retrofit Installation Integration with Existing Systems Solution for LEED credit

SENTRON PAC, PROFIBUS DP, MODBUS RTU and PROFINET expansion modules for remote data transmission.

Two Digital Input and two Digital Outputs as standard

Terminal blocks for voltage and current measuring, control power and digital input and output Digital input and output module provides 4 additional digital inputs and 2 digital outputs

96 mm 3.78 in.

POWER MONITORING

96 mm 3.78 in.

77 mm 3.03 in.

Order information
Product SENTRON PAC4200 compression terminals not suitable for use with ring tongue terminals, AC/DC SENTRON PAC PROFIBUS DP expansion module SENTRON PAC MODBUS RTU expansion module SENTRON PAC PROFINET expansion module SENTRON PAC I/O module 4DI + 2DO Connector block suitable for use with ring tongue terminals SENTRON Adapter Plate for 4700/4720 meter cutout SENTRON PAC32/4200 Meter DIN Rail adapter Meter display will not be seen SITOP Power Supply AC 99-264VAC, 24 VDC, 0.5A Catalog Number 7KM4212-0BA00-3AA0 7KM9300-0AB00-0AA0 7KM9300-0AM00-0AA0 7KM9300-0AE00-0AA0 7KM9300-0AB00-0AA0 Consult Siemens Sales 93-47ADAPTER 7KM9900-0YA00-0AA0 6EP1331-2BA10

99mm, 3.90 in., with expansion module Omit dashes from part numbers when ordering except on 93-47ADAPTER.

9-6

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

Product Category PDS

Power Distribution Solutions

9340 / 9360 Power Meter Web-Enabled
Reliable and Precise Monitoring of Electrical Power Systems
The Siemens ACCESS 9340/9360 series power meters combine accurate, 3-phase energy and power measurement with data logging, power quality analysis, alarm, and I/O capabilities not typically available in a compact meter. The meters are ideally suited to local and remote monitoring of low or high voltage electrical installations in industrial facilities, commercial buildings, utility networks or critical power environments. Facility and operations personnel will benefit in energy related costs while avoiding power quality conditions that can reduce equipment life and productivity. ACCESS 9340/9360 series meters are easy to install and use, offering integrated or remote high-visibility displays. A choice of two models and a range of expansion modules help match features to the application and support field-upgrading of meters as required. Serial and Ethernet communication options enable the meters to be used within a Siemens power management system or with third-party automation systems.

Precision
ANSI C12.20 Class 0.5s Energy Measurement Voltage +/- .1% Current +/- .1% Power Factor +/- .5% Sampling Rate 128/per cycle 9340 Individual Harmonics up to 31st 9360 Individual Harmonics up to 63rd 9360 Sags / Swells Detection Programmable Math / Logic Function n Revenue Accurate Sub Billing Cost Allocation
n

Energy Management
Energy Consumption 9360 Waveform Capture n Customizable Webpages n Min/Max and Event Logs 9340 Storage Capacity 80kb 9360 Storage Capacity 800kb n Demand Control n Automation Integration n Solution for LEED credit n Monitors Critical Equipment n Modbus Gateway n Modbus TCP/RTU n Industrial Systems
n n

Reliability
n Economical Measurement Commercial Industrial n Degree of Protection Front IP52 Rear IP30 n 600V Connected Voltage n Customizable Displays n Email Alarms through Ethernet n Field Addable Modules n Simple Retrofit Installation n Integration with Existing Systems

Order information
Meter with integrated display ACCES S 9340 meter with display, THD, alarming, 80 kb logging ACCESS 9360 meter with display, THD, alarming, 800 kb logging, configurable waveform sag, swell detection Meter with remote display ACCESS 9340 meter with remote display, basic instrumentation, THD, alarming, 80 kb logging ACCESS 9360 meter with display, THD, alarming, 800 kb logging, configurable waveform sag, swell detection Meter without display ACCESS 9340 meter without display, THD, alarming, 80 kb logging ACCESS 9360 meter without display, THD, alarming, 800 kb logging, configurable waveform sag, swell detection Remote display, adapter and accessories ACCESS 9340 display adapter kit ACCESS 9360 display adapter kit ACCESS 9340 and 9360 display adapter ACCESS 9340/60 gasket analog meter round ACCESS 9340/60 I/O module, 2 relay output, 6 digital input ACCESS 9340/60 I/O module, 2 relay output, 2 digital input, 2 analog input, 2 analog output ACCESS 9340/60 ethernet communication card ACCESS 9340/60 RJ11 extender kit Catalog Number 9340DC 9360DC Catalog Number 9340RC 9360RC Catalog Number 9340TC 9360TC Catalog Number 9340-DISPKIT 9360-DISPKIT 9340-60-DISPADA 9340-60-GASKET 9340-60-I/O26 9340-60-I/O2222 9340-60-ETHER 9340-60-RJ11EXT

9
POWER MONITORING

Product Category PDS

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

9-7

Power Distribution Solutions

9510 / 9610 Power Quality Meter
Power Quality Meter with Web Server Technology
These high power quality meters are packed with features such as the ability to determine the location of a disturbance quickly and accurately and determine the direction of the disturbance relative to the meter. Analysis results are captured in the event log, along with a time-stamp and confidence level indicating level of certainty. The 9510/9610 base meter includes 8 digital inputs capable of providing 1 millisecond time stamping and 7 digital outputs. The 9510/9610 meters support numerous protocols including IEC61850 and Comtrade. Fast sampling rates and extensive memory make this the perfect choice for critical power systems making analysis of issues possible for correction and prevention. As a data accumulator, the 9510 and 9610 meters can also save money and time by simplifying wiring and networking. Information from the meter and downstream devices can be displayed on the large LCD display, on customizable web pages in reports and screens. Applications for the 9510 and 9610 meters range from critical power applications such as data centers to industrial, commercial and government power and power quality monitoring systems. The 9510 and 9610 meters are offered in a number of forms from single meter enclosures integrated into Siemens switchgear, switchboard and panelboards. Place these high end power quality meters throughout the power distribution system where critical information is desired. Know what is happening in your facility and get maximum efficiency.

Precision
n n

Energy Management
n n n n n n

Reliability
n

ANSI C12.20 Class .2s Energy Measurement Voltage +/- .01% Current +/- .01% Power Factor +/- .5% 9510 Sampling Rate 256/per cycle 9610 Sampling Rate 512/per cycle 9610 XH Sampling Rate 1024/per cycle 9510 Individual Harmonics up to 127th 9610 Individual Harmonics up to 256th Sags / Swells Detection Programmable Math / Logic Function Revenue Accurate Sub Billing Cost Allocation

n n n n n n

Energy Consumption Waveform Capture Transient Capture 17 s @ 60 Hz Disturbance Direction Detection (DDD) Customizable Webpages Min/Max and Event Logs Storage Capacity up to 3.3 years at 15 min intervals Event Logging up to 20,000 Waveform Captures up to 390 Demand Control Automation Integration Monitors Critical Equipment Modbus Master / Gateway Supports Multiple Protocols Supports Multiple Master via Ethernet

n n n n

n n n n

Economical Measurement Commercial Industrial 600V Connected Voltage Transformer Line Loss Compensation Email Alarms Customizable Displays Event / Alarm Log Trending Phasor Diagrams Password Protected Hardware Lockable Supports Copper or Fiber Ethernet Integration with Existing Systems

Meter with integral display dimensions

Meter transducer unit (w/o display) dimensions

POWER MONITORING

Front view

Side view

Front view, TRAN model

Back View

Side view, TRAN model

Rear view, TRAN model

9-8

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

Product Category PDS

Power Distribution Solutions

9510 / 9610 Power Quality Meter
Order Information for 95/9610 Power Meters
Catalog Number 9 X 1 0 D C 1 1 5 6 C Z Z A

Description
Meter base unit and display options Meter with integrated display and 5MB logging memory Meter with integrated display and 10MB logging memory Meter without display (Tran version) and 5MB logging memory Meter without display (Tran version) and 10MB logging memory Sampling rate Standard sampling (256 for 9510) ( 512 for 9610) per cycle maximum 1024 Samples per cycle (9610 only) Power Supply 85-240 Vac / 110-300 Vdc 20-60 Vdc Input Voltage 120 to 347 L-N / 208 to 600 L-L V AC Input Current 1A Nominal (10 Amp full scale) 5A Nominal (20 Amp full scale) Frequency 50 Hz 60 Hz Communication Cards RS232/RS485 (Selectable) RS485 Infrared (Note 1) Modem (Notes 1 & 2) 10/100 Base-T 10/100 Base-FX A C G H J K 1 2 C H D E T U

1 5 5 6

Auxiliary I/O Cards None (base meter includes 8 digital in and 7 digital out) 8 Binary Inputs; 4 Analog Inputs 0 to 20 mA and 4 Analog Outputs 0 to 20 mA 8 Binary Inputs; 4 Analog Inputs 0 to 1 mA and 4 Analog Outputs -1 to 1 mA Tropicalization Option None Yes Specials None Password protected and hardware lockable (lock enabled/disabled via jumper on comm card) EN50160 Compliance Monitoring (available on 9610 only) EN50160 Compliance Monitoring with password protected and hardware lockable (lock enabled/disabled via jumper on comm) (available on 9610 only) Note 1 The infrared and modem connections cannot be operated simultaneously. The connection type is configurable. Note 2 The listed modems are not suitable for European applications. Contact Siemens for special versions.

Z F G

Z T

9
POWER MONITORING
A B C D

Product Category PDS

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

9-9

Power Distribution Solutions

9510 RTU Data Concentrator
Siemens Advanced Data Recorder and Central Display
Features n Monitor breaker status changes with 1ms resolution n Collect, log, and scale pulse inputs from water, air, gas, electricity, or steam meters n Act as an Ethernet gateway for serial devices n Display Modbus slave information and make available as a web page n Log and e-mail down stream Modbus device date n Display trip unit data from WL, VL, Static Trip III and SB-EC devices n Trigger and email alarms based on setpoint conditions n Display feeder energy information for LEED certification n Engineering service required to setup the 9510-RTU features Catalog Number

9510-RTU as a master display / web server

COM1 IP Address: XXX.XXX.XX COM 1: Modbus Master RS 485 Baud: 19200

The 9510-RTU unit can serve many uses through out a facility. This lowcost central display - data recorder can provide HTML web pages and customizable displays to allow easy access to the data and provide E-mail alarming for critical information. This multi-functional unit supports communications to any Modbus RTU device and digital / analog I/O, allowing the 9510-RTU to provide solutions for many different applications.

RS 485 WL Trip Units (max 16 devices)

Modbus VL Breakers (max 16 devices)

Description

E
D E T U

Meter base unit and display options Option #1 Meter with integrated display and 5MB logging memory Option #2 Meter with integrated display and 10MB logging memory Option #3 Meter without display, with a 5MB logging memory (TRAN version) Option #4 Meter without display with a 10MB logging memory (TRAN version) Communications ION / Modbus RTU - Factory configured for ION Power Supply 85-240 Vac / Vdc 20-60 Vdc No Display Option Remote transducer option Communication Cards RS232/RS485 (Selectable) RS485 Infrared (Note 1) Modem (Notes 1 & 2) 10/100 Base-T 10/100 Base-FX

C 1 2 R T U

A C G H J K Z F G Z T A

POWER MONITORING

Auxiliary I/O Cards None (base meter includes 8 digital in and 7 digital out) 8 binary inputs; 4 Analog Inputs 0 to 20 mA and 4 Analog Outputs 0 to 20 mA 8 binary inputs; 4 Analog Inputs 0 to 1 mA and 4 Analog Outputs -1 to 1 mA Tropicalization Option None Yes Specials Standard (password protected, no locking or sealing) Note 1 The infrared and modem connections cannot be operated simultaneously. The connection type is configurable. Note 2 The listed modems are not suitable for European applications. Contact Siemens for special versions.

9-10

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

Product Category PDS

Power Distribution Solutions

Enclosed Meters
Convenience and Reliability with Siemens Meter Enclosures
The Siemens meter enclosure offering is available to order with the SENTRON PAC series meters, the ACCESS series meters, and a combination of both power meter product offerings. The enclosed meter offering provides the required energy and basic metering information needed for a typical sub-billing / cost allocation application, as well as providing a simple retrofit solution for any project. With Safety being paramount, Siemens has designed the meter enclosure product offering with many safety and convenience features in mind. These include a single circuit breaker for both the control voltage & voltage taps to protect internal wiring and the power meters from damage and allowing a single source disconnect from outside power, separate CT shorting blocks for each meter, a grounding lug, and the Modbus serial communications will be terminated to one location for ease of network installation. The Siemens meter enclosure solutions are delivered with all the required components pre-installed prior to shipment. All components will be mounted to a back plate in the enclosure and for applications above 240 volts, a CPT will be provided for control. For low cost and simple tenant monitoring, sub-billing or industrial cost allocation, turn to Siemens metering units. Installed in rugged NEMA 1 or NEMA 12 enclosures, these metering units are ideal for:
n n n n n n n

Features:
n n n n n

Rugged design and small footprint for easy installation Bright, easy-to-read LCD display Multiple configurations Packaged by voltage and current ratings to accommodate any installation Utilizes 5A secondary current input for improved accuracy and increased compatibility

Benefits:
n n n n n

Property Management Firms Government Applications Universities Corporate Campus Facilities Malls Food Courts Building Retrofits

Replace multiple utility meters with one enclosure, saves wall space Consolidate utility bills for sub-billing and energy management, bill tenants on actual usage Improve energy efficiency Aggregate energy purchases for reduced rates Improve productivity when coupled with Siemens software solutions or third party billing software

Catalog Logic:
E N C L X X X X X X X X X X
Meter 31 PAC3100 Series Meter 32 PAC3200 Series Meter 42 PAC4200 Series Meter Voltage 240 240V 480 480V Type 01 NEMA 1 Enclosure 12 NEMA 12 Enclosure Module TC Standard RT Modbus RTU PD PROFIBUS PN PROFINET Options X Standard Meter Enclosure Without Meter Catalog Number ENX24001-121208 ENX24012-121208 ENX48001-121208 ENX48012-121208 Description 12W 12W 12W 12W x x x x 12H 12H 12H 12H x x x x 8D 8D 8D 8D NEMA NEMA NEMA NEMA 1 Enclosure 240V 12 Enclosure 240V 1 Enclosure 480V 12 Enclosure 480V

9
POWER MONITORING

PAC3100 standard is Modbus RTU. PAC3200 and PAC4200 Standard is Modbus TCP. Modules not available on PAC3100.

Product Category PDS

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

9-11

Power Distribution Solutions

Branch Circuit Monitoring / Embedded Metering
Space Savings, Convenience, and Reliability with Siemens Branch Circuit Monitoring
In a world where tenant square footage is a premium in commercial building designs, the area for electrical metering is being drastically reduced, and critical power is being relied upon in data centers applications, Siemens Branch Circuit Monitoring provides the solution. The Siemens Branch Circuit Monitoring Solution utilizes the metering and monitoring technology integrated into the space saving panelboards from Siemens. When compared to the typical external wall mounted metering installations, considerable savings in space, installation costs, and data collection are realized with the Siemens Branch Circuit Monitoring Solution. Siemens Branch Circuit Monitoring / Embedded Metering Solution n Saves you money A tenant billing system improves cash flow, allows immediate pass-on of electric rate increases and helps building owners control costs. Tenants are confident they are paying their fair share for energy use and are saving money through energy conservation. n Fast, low-cost installation The embedded Siemens solution provides a faster and lower cost installation compared to other external systems. n Lower space requirements The embedded panelboard construction design requires no additional wall space to provide tenant metering. Conventional metering requires an external metering enclosure and possibly a current transformer transition cabinet. n Reliable and accurate Many Siemens systems are already in operation in large commercial and residential buildings around the country. Their accuracy exceeds utility industry and government standards like EPact 2005 for revenue grade meters. n LEED certification Provides the energy monitoring and logging required to achieve additional LEED points. n Automated billing With automated billing services the responsibility to acquire the data, store the data and bill the tenants is removed from the property management company, thus saving manpower and time. n Responsive service With remote monitoring, continuous 24/7 monitoring can be done by the property management company or tenants. The service can also relay consumption changes to the owners for immediate investigation. In addition, contractor labor costs for installation of sub-metering systems continues to increase. Still, building owners and property management companies must face the challenges of how to cost effectively provide tenant sub-metering in the constrained spaces. To meet the sub-metering challenges of designers, contractors and property management companies, Siemens offers a proven cost-effective solution for Branch Circuit Monitoring/Embedded Metering .This solution combines a fully integrated metering system factory installed into the Siemens P series panel boards and switchboards, which along with the required local or remote sub-billing software, provides a Total sub-metering system.

Designer and contractor benefits include: n Much smaller footprint versus the traditional socket meter combo units n Factory pre-wired less installation time n Drastically less installation wiring n No CT installation required in the field n All equipment fits into the standard Siemens panel design n Additional utilities like water, air and gas can be easily integrated into the system for a comprehensive monitoring system n Hardwire and wireless communication options n All components factory calibrated to meet revenue metering requirements n Additional meters can be added in the field n UL and CSA-us listed

Branch Circuit Monitoring applications include: n Mixed Tenant & Retail n Industrial Manufacturing n Higher Ed n Strip Malls n Critical Power n Goverment n LEEDS buildings n Airports

POWER MONITORING

Please Contact Your Siemens Sales Engineer for additional information regarding Branch Circuit Monitoring / Embedded Metering 9-12
Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

Product Category PDS

Power Distribution Solutions

Low Voltage Current Transformers
Comprehensive metering grade CT offering spilt-core, flexible and solid core designs
Split core Rectangular Window Siemens Instrument Grade Current Transformers (CT) have a split-core construction and provide a safe 5A secondary output. These split-core current transformers allow for easy installation, retrofit, and service. CTs come with 4 leads (18 gauge). Use on low voltage applications of 600V or less. Accuracy 0.5%.
Window (C x B) 1.25x1.15 1.25x1.51 1.25x1.51 2.45x2.89 2.45x2.89 2.45x2.89 2.45x5.50 2.45x5.50 2.45x5.50 2.45x5.50 2.75x6.625

Amps 100A 200A 300A 400A 600A 800A 1000A 1200A 1600A 2000A 3000A

Catalog Number PDS-CTSC-011 PDS-CTSC-021 PDS-CTSC-031 PDC-CTSC-042 PDS-CTSC-062 PDS-CTSC-083 PDS-CTSC-013 PDS-CTSC-123 PDS-CTSC-163 PDS-CTSC-200 PDS-CTSC-03R

200A 300A A = 3.75 (95mm) B = 1.51 (38mm) C = 1.25 (32mm) D = 1.13 (29mm) E = 4.20 (107mm) F = 4.75 (121mm)

400A 800A A = 4.90 (124mm) B = 2.89 (73mm) C = 2.45 (62mm) D = 1.13 (29mm) E = 5.57 (141mm) F = 5.91 (150mm)

1000A 1200A A = 4.90 (124mm) B = 5.50 (140mm) C = 2.45 (62mm) D = 1.13 (29mm) E = 8.13 (207mm) F = 5.92 (150mm)

Split-core Round Window Split-core round rubber insulated flexible CTs with 12 heavy duty leads (18 AWG) and 5A secondary output for use on low voltage applications of 600V. Accuracy is 4% for 200/400A, 3% for 400A, and 2% for 600A and above.

Amps 200A 300A 400A 600A 800A 1200A 2000A 3000A 4000A

Window (A) 4.00 4.00 4.00 4.00 4.00 4.00 6.00 6.00 6.00

Catalog Number PDS-CTHC-024 PDS-CTHC-034 PDC-CTHC-044 PDS-CTHC-064 PDS-CTHC-084 PDS-CTSC-123 PDS-CTHC-206 PDS-CTHC-306 PDS-CTHC-406

200A 1200A A = 4.00 B = 1.25 C = 1.50 D = 6.50

3000A 4000A A = 6.00 B = 1.25 C = 1.50 D = 8.50

POWER MONITORING

Product Category PDS

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

9-13

Power Distribution Solutions

Low Voltage Current Transformers
Comprehensive metering grade CT offering spilt-core, flexible and solid core designs
Solid-core Round with Round Window The small size solid core Current Transformer (CT) are designed for tight locations and new installations providing a safe 5 amp secondary for use on voltage applications of 600V or less. Accuracy is 0.3%. Solid-core Square with Round Window Siemens Instrument Grade Current Transformers (CT) are designed as solid-core construction and provide a safe 5A secondary output. Solid-core CTs come with terminals for attaching leads. Use on low voltage applications of 600V or less. Accuracy is 0.3%.
Amps 200:5 300:5 400:5 500:5 600:5 800:5 1000:5 100:5 200:5 300:5 400:5 800:5 1000:5 1200:5 1600:5 2000:5 3200:5 4000:5 Dimension (A x B x C x D) 1.25 x 4.88 x 2.19 x 4.68 1.25 x 4.88 x 2.19 x 4.68 1.25 x 4.88 x 2.19 x 4.68 1.25 x 5.10 x 3.00 x 5.50 1.25 x 5.10 x 3.00 x 5.50 1.25 x 5.10 x 3.00 x 5.50 1.25 x 5.10 x 3.00 x 5.50 2.25 x 6.31 x 3.00 x 5.82 2.25 x 6.31 x 3.00 x 5.82 2.25 x 6.31 x 3.00 x 5.82 2.25 x 6.31 x 3.00 x 5.82 4.00 x 6.44 x 3.25 x 3.25 4.00 x 6.44 x 3.25 x 3.25 4.00 x 6.44 x 3.25 x 3.25 4.00 x 6.44 x 3.25 x 3.25 4.00 x 6.44 x 3.25 x 3.25 6.50 x 9.88 x 7.00 x 7.00 6.50 x 9.88 x 7.00 x 7.00 Catalog Number PDS-CTRC-021 PDS-CTSC-031 PDS-CTRC-041 PDC-CTRC-051 PDS-CTRC-061 PDS-CTRC-081 PDS-CTRC-101 PDS-CTRC-012 PDS-CTRC-022 PDS-CTRC-032 PDS-CTRC-042 PDS-CTRC-084 PDS-CTRC-104 PDS-CTRC-124 PDS-CTRC-164 PDS-CTRC-204 PDS-CTRC-326 PDS-CTRC-426

Example: 100 to 300A size

Solid core Round metering grade, 600V Catalog Number SMU-CT-011 SMU-CT-021 SMU-CT-025 SMU-CT-031 SMU-CT-041 SMU-CT-061 SMU-CT-081 SMU-CT-123 SMU-CT-02R Primary 100A 200A 250A 300A 400A 600A 800A 1000A 2000A Size 1.75 x 2.47, 1 Window 1.75 x 2.47, 1 Window 1.75 x 2.47, 1 Window 1.75 x 2.47, 1 Window 1.1 x 3.56, 1.56 Window 1.1 x 3.56, 1.56 Window 1.1 x 3.56, 1.56 Window 1.1 x 3.56, 1.56 Window 1.15 x 5.73, 3.25 Window

Shorting Block All low voltage current transformers should be installed with a shorting block to allow for easy removal of the metering unit and to provide a safe method for disconnecting the CT signal. One shorting block is required per meter. Various size shorting blocks are available; 4, 6, and 8 pole configurations are available with four slotted shorting screws and cover. Wire size is 18-10 AWG.
Catalog Number IKU4SC IKU6SC IKU8SC IKU12SC Mounting Ckts. 4 6 8 12 L 3.25 4.50 5.75 8.25 D min. 2.88 4.12 5.38 7.88 D max. 3.00 4.25 5.50 8.00

POWER MONITORING

Typical electrical meter CT and shorting block installation This example shows a common three phase, three wire installation where three CTs and one shorting block are used.

9-14

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

Power Distribution Solutions

Powermanager
A power management system that can be customized to your needs. View and control your facilities infrastructure condition from anywhere. SENTRON Powermanager software, combined with Siemens power meters and low voltage protective devices, provides a complete energy management solution for your business. It allows you to measure, process, analyze, store and share energy usage and status information across your entire enterprise. It offers control capabilities, comprehensive energy usage and reliability, and detailed reporting that will help you reduce energy related costs.

Cost allocation and Sub-billing Reports Cost allocation and sub-billing functionality in the Powermanager software allows the user to track energy related costs by building, floor, tenant, feeder or location. Match virtually any fixed rate billing structure and use comprehensive multi-year scheduling and time-of-use features to manage the energy costs. Load Studies and Asset Management Trend power usage data to take full advantage of your electrical distribution system capacity and avoid over-design. Create usage profiles that will allow you to distribute loads and avoid demand peak which helps to identify energy leaks such as equipment running during down time. Equipment Monitoring and Control Powermanager allows you to meter all your utilities including gas, steam, air and water and set up general condition alarming and pre-event alarms for impending or imminent conditions. Interface with other energy management and SCADA systems through multiple communication channels and protocols like OPC. Reports Standard reports provide models of daily electricity usage so you can distribute loads and avoid demand peaks. This enables you to allocate energy consumption and/or costs to individual areas and identify expensive processes that need attention. The historic trending report compiles data from load circuits over a users predefined period. This enables the user to fully utilize the power distribution system and run at near rated tolerances. Ordering information
Powermanager Software and Device License Trial License 10 devices, feature packages Expert and Web, 30 days Lean License 10 devices Lean Plus License 10 devices, feature packages Expert and Web Standard Plus License 50 devices, feature packages Expert and Web Advanced Plus License 100 devices, feature packages Expert and Web Maximum Plus License 200 devices, feature packages Expert and Web Powermanager Add Ons and Upgrades Lean Plus to Standard Plus Upgrade License Standard Plus to Advanced Plus Advanced Plus to Maximum Plus Windows Client <= 5 Expansion up to 5 total clients Windows Client <=10 Expansion from 5 to 10 clients, requires <=5 Contact Siemens for upgrade information

Benefits n Visibility and control of power flows n Exact knowledge of the consumption profile n Increase of energy efficiency n Optimization of power supply contracts n Compliance with contractual terms or regulations n Allocation of costs to individual cost centers n Optimization of plant maintenance n Identification of critical systems conditions The Powermanager software: Is available in a stand-alone or LAN/WAN based configuration that can also exchange information with other supervisory systems like building automation software n Can utilize any Ethernet or serial based connections n Is expandable from the basic monitoring application to a fully customized enterprise management system n Is fully scalable with regard to the connected devices and to the softwares function to meet current and future needs
n n

Ensures the seamless integration of power monitoring devices from the Siemens SENTRON PAC series meters and SENTRON WL/VL circuit breakers as well as other Modbus communicating devices Is designed to collect, archive, monitor, display and evaluate any kind of energy related device data Provides web based reporting and detailed graphics construction utilities as standard

Catalog Number 3ZS27110CC200YA7 3ZS27110CC200YA0 3ZS27118CC200YA0 3ZS27128CC200YA0 3ZS27138CC200YA0 3ZS27148CC200YA0 Catalog Number 3ZS27120CC200YD0 3ZS27130CC200YD0 3ZS27140CC200YD0 3ZS27103CC200YH0 3ZS27104CC200YH0

POWER MONITORING

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

9-15

Power Distribution Solutions

WinPM.net
WinPM.net is a complete energy information management solution for your business allowing you to process, analyze, store and share energy usage and power quality data across your entire enterprise. It offers control capabilities, comprehensive power quality and reliability analysis and can help you reduce energy-related costs. WinPM.net allows you to manage intelligent metering and protective devices, analyze data, and decide on new courses of action to help you save money and keep your business up and running. Its cutting-edge flexibility and compatibility means you can add one piece at a time, at your own pace, while still maintaining your original investments. Interface to your existing systems through industry-standard protocols and choose newer components as they become available. The WinPM.net software: n Provides detailed analysis of the power quality and overlays waveforms to correlate phase-to-phase relationships between voltages and currents and cascading failures n Pinpoints the sources of transients, harmonics, or sags, whether external or internal to your facility, allowing you to decide on the right corrective actions. By monitoring circuits 24 hours a day, you can develop strategies to avoid interruptions n Provides a comprehensive graphics utility as standard to build and edit any graphical screen whether it is a standard screen or a customized one. These custom screens can display real-time and historical data, alarms, status indications, meter, relay and third party equipment information n Supports Modbus RTU, Modbus TCP, ION, XML, OPC, FTP, and PQDIF compliant systems, so you can unify your diverse operations into one system. Interface to other energy management software, or include transducers, PLCs, and RTUs in a WinPM.net network. OPC can extract values from other software databases then combine these values with up-to-date readings from WinPM.net to perform real time calculations n Offers easy, cost effective and fast system expansion. The system grows as your needs grow. Add one piece at a time, at your own pace, within your own budget Ordering information
Software WinPM.Net V4.0 CD New (includes 5 Access meter device licenses) WinPM.Net V4.0 CD Replacement Device License ACCESS ACCESS ACCESS ACCESS ACCESS ACCESS Add Ons WinPM.Net Vista Client license limit 1...50 3ZS67220CC400A2 WinPM.Net OPC Server license 3ZS67520CC400A2 WinPM.Net SQL 2005 Base CPU license 3ZS67300CC400A0 WinPM.Net SQL 2005 additional CPU license 3ZS67400CC400A0 WinPM.Net PQDIF Exporter Module license Option 3ZS67600CC400A0 Allows remote configuration of base WinPM.Net software. Note: WinPM.Net software will support unlimited view-only client access when using IE5.0 (SP2) or higher. Excel is required for Reporter. Outlook is required for e-mailing reports. Contact Siemens for upgrade information 9xxx meter device license limit 6...50 9xxx meter device license limit 51...100 9xxx meter device license limit 101...1000 Comp. or Modbus/SeaBus device license limit 1...50 Comp. or Modbus/SeaBus device license limit 51...100 Comp. or Modbus/SeaBus device license limit 101...1000 3ZS68120CC400A2 3ZS68130CC400A2 3ZS68140CC400A2 3ZS68220CC400A2 3ZS68230CC400A2 3ZS68240CC400A2 Catalog Number 3ZS67100CC400A0 3ZS67100CC400C0

Cost allocation and sub-billing Track energy-related costs by building, feeder, or tool. Match virtually any billing structure and use comprehensive multi-year scheduling and time-of-use activity profiles. Load studies and asset management Trend power usage data to take full advantage of your electrical distribution system capacity and avoid over-design. Create usage profiles so you can distribute loads and avoid demand peak. Demand and power factor control Eliminate penalties through automated power factor correction, load shedding, or peak shaving.

9
POWER MONITORING

Equipment monitoring and control Meter all your utilities including gas, steam, air and water. Set up alarms for pending problems, prealarm on impending or imminent conditions. Interface with other energy management and SCADA systems through multiple communication channels and protocols. Preventative maintenance Base your maintenance schedule on actual operating history.

9-16

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

Power Distribution Solutions

Application Engineering
Application Engineering capabilities
Provides: Power Quality Reliability & Analysis Utilities Cost Allocation & Billing Utilities Usage Aggregation Load Preservation Equipment Monitoring Facility Monitoring & Automation Sequence of Event Recording Preventative Maintenance Electrical Asset Management The Siemens Power Distribution Solutions Application Engineering team provides the required experience and knowledge to implement any system regardless of the size or complexity. Siemens Application Engineers are highly skilled professionals who understand how to combine the best PMC software and hardware to create solutions that exceed our customers expectations.

Key Market Expertise:

n

PDS Custom Solutions:

n

Commercial Construction: New / Retrofit Tenant / Sub Billing Critical Power: Data Centers Hospitals JCAHO Government: Local, State & Federal Government EPACT projects Universities Airports Industrial Applications: Petro - Chem., Cement, Food & Beverage, Waste water, Automotive

n n n n n n n n n n

LAN WAN based solutions using our WinPM.Net web-based software Custom power metering logic Custom billing, energy usage or load profile reports Integration of other utilities like gas, water, steam, air and more Custom interactive one-line, elevation or floor plan graphics Third party hardware and software Integration Extensive alarm configuration and implementation Custom data logging and data retrieval. Siemens or others plant factory witness testing On-site and remote hands-on system training Overall PMC project management

Application Engineers Capabilities:

n n n n n n

n n

Communication network topology approval drawings Project management plan for the PMC system Interface to Siemens APOGEE building management system Power monitoring workstations and server configuration Final as-built operation and maintenance manuals Integrate with Siemens medium voltage, low voltage Switchgear & motor control centers Integration with Siemens Industrial Automation components & Software WinCC / PCS 7 System communication troubleshooting Site Acceptance Test procedure (SAT), Method of Procedures (MOP), Factory Acceptance Test Procedure (FAT) On-site startup & commissioning

Reliable Power Quality Whether you are designing a fault tolerant mission critical infrastructure or you want to intelligently balance workloads to optimize energy usage and control costs, you need a reliable and industry proven monitoring solution. You will gain a visible look into the actual power consumption to understand the average and peak power utilization, monitor and manage UPSs and power distribution units, or even a complete IT support infrastructure, including generators, environmental systems and detection devices, as well as other components from multiple vendors. A Siemens designed solution using WinPM.Net or Powermanager, coupled with high quality Siemens meters will result in a powerful tool, helping to analyze, identify and correct power issues before they become critical. Instant notification by email or alarm when power quality issues such as sag/swell or voltage disturbance occur.

Flexible Easily integrate with any vendors equipment using standard communication protocols to combine critical alerts and realtime data. Monitor and manage critical power devices from a single uninterruptible power system (UPS), an enterprise-wide network of many UPSs and power distribution devices, or a complete IT support infrastructure, including generators, environmental systems and detection devices, and other components from multiple vendors. Informative Siemens Power Distribution and Solutions provide an energy monitoring solution that can provide you with the reports and the data you need for your operation. Complete power analysis from the incoming utility power to individual branch circuits.
Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog

9
POWER MONITORING

9-17

Power Distribution Solutions

Services
Advantages to You...
n n n

Technical experts Single source supplier Available 24/7, 365 days a year Reduced total cost of ownership (TCO) Avoid unscheduled downtime with preventive maintenance

SIEPRO Service Products

Modular SIEPRO service products enable you to customize a technical service agreement to meet your organizations maintenance needs over the entire life cycle of your installation. Including SIEPRO products in your TSA will provide the following benefits: Substantial savings versus on demand purchases Optimized scaling of your maintenance organization Assurance that your installation is operating at maximum performance and availability Telephone and Internet Priority support When you need help right now, choose the support coverage that fits your business: 24 hours x 7 days a week 8 hours x 5 days a week Extended support With extended support, you can request blocks of support hours for specific projects and tasks. We can customize this support service to meet your individual needs. Remote service Remote service provides support and diagnostics via data line to save you time and money. Technical support specialists directly access your system for real-time troubleshooting to provide maximum uptime. Technical account liaison A technical account liaison provides consulting and guidance on all aspects of support through familiarity with the application, your business goals and processes, and your maintenance and engineering staff. In addition to a site visit to assess your installation and support requirements, the technical account liaison will conduct monthly reviews with your staff to ensure you are receiving maximum payback on your investment. Field services Block of hours Purchase field service hours in 40 hour increments for preventative, predictive or emergency services. Embedded engineer Full-time, on-site support from a certified Siemens professional. Emergency support Purchase emergency service hours in 40 hour increments to ensure the fastest possible response time. Maintenance programs Packaged maintenance programs available for: System performance checks Run diagnostics Analyze power quality Visual inspections of key system components Database trim and backup Training Operation and maintenance Siemens training offers a broad range of educational services, providing quality and excellence to the automation industry. Targeted product and system training provides the student with practical, hands-on experience. Customized on-site training On-site training is excellent for large groups or when individual, one-on-one instruction is needed. When the trainer visits your facility, product training will be conducted on your specific installation. Classroom lectures, and trouble-shooting techniques specific to your installation are covered in detail during the training session. Software update service The software update service enables you to take advantage of enhancements to the most current software versions. A site evaluation is conducted to determine necessary upgrade requirements prior to the Software Update Service.

POWER MONITORING

9-18

Siemens Industry, Inc. SPEEDFAX 2011 Product Catalog