Scribd
Upload
983 views1 page

Expansion Joint Model

The document describes a piping model with several sections between nodes 10 to 14. The first section from node 10 to 11 is 254 mm and rigidly supported. The next section from 11 to 12 is 222.25 mm with an expansion joint. The section from 12 to 13 is again 254 mm and rigidly supported. The entire run from nodes 10 to 14 is 730.25 mm, with node 14 tied to node 13 to restrain movement.

Uploaded by

nirga
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
983 views1 page

Expansion Joint Model

The document describes a piping model with several sections between nodes 10 to 14. The first section from node 10 to 11 is 254 mm and rigidly supported. The next section from 11 to 12 is 222.25 mm with an expansion joint. The section from 12 to 13 is again 254 mm and rigidly supported. The entire run from nodes 10 to 14 is 730.25 mm, with node 14 tied to node 13 to restrain movement.

Uploaded by

nirga
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

From 10 To 11 DX= 254.000 mm.

RIGID Weight= 787.57 N.


RESTRAINTS
Node 10 ANC
-----------------------------------------------------------------------------From 11 To 12 DX= 222.250 mm.
EXPANSION JOINT
Axial K= 8,047 N./cm. Trans K= 46,398 N./cm. Tors K= 145,566 N.m./deg
Eff Dia= 435.607 mm.
----------------------------------------------------------------------------From 12 To 13 DX= 254.000 mm.
RIGID Weight= 787.57 N.
----------------------------------------------------------------------------From 10 To 14 DX= 730.250 mm.
TIE ROD
RIGID Weight= .00 N.
MODELING
RESTRAINTS
Node 14 X Cnode 13
Node 14 RZ Cnode 13
Node 14 RY Cnode 13
----------------------------------------------------------------------------From 13 To 20 DX= 3,269.750 mm.
-----------------------------------------------------------------------------

printed: 01/08/13 16:35:41

model: I:\001_MISC\228_DSW\06-MECHANICAL\07.STRESS ANALYSIS\TEST\BROMINE TEST FOR 20INC PIPE

You might also like