1.

5KE
Transil
Datasheet production data

Features

Peak pulse power: 1500 W (10/1000 s) Breakdown voltage range: From 6.8 V to 440 V Uni and bidirectional types Low clamping factor Fast response time UL 497B file number: QVGQ2.E136224 DO-201
K

Description
Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology and low voltage supplied ICs.

TM:Transil is a trademarks of STMicroelectronics.

March 2012
This is information on a product in full production.

Doc ID 2913 Rev 4

1/10
www.st.com 10

Characteristics

1.5KE

1
Table 1.
Symbol PPP P IFSM Tstg Tj TL

Characteristics
Absolute maximum ratings (Tamb = 25 C)
Parameter Peak pulse power dissipation (1) Power dissipation on infinite heatsink Non repetitive surge peak forward current for unidirectional types Storage temperature range Maximum operating junction temperature Maximum lead temperature for soldering during 10s at 5mm from case. Tj initial = Tamb Tamb = 75 C tp = 10 ms Tj initial = Tamb Value 1500 5 200 -65 to + 175 175 230 Unit W W A C C C

1. For a surge greater than the maximum values, the diode will fail in short-circuit.

Table 2.
Symbol Rth(j-l) Rth(j-a)

Thermal parameter
Parameter Junction to leads Junction to ambient on printed circuit. L lead = 10 mm Value 20 C/W 75 Unit

Figure 1.

Electrical characteristics - definitions

I IF
Unidirectional

I IPP

VRM Stand-off voltage VBR Breakdown voltage VCL Clamping voltage IRM Leakage current @ VRM IPP Peak pulse current IR Breakdown current T Voltage temperature coefficient VF Forward voltage drop RD Dynamic impedance

VCL VBR VRM IRM IR

VF

VCLVBR VRM

IR IRM IRM IR

V VRMVBR VCL

IPP

IPP

Bidirectional

2/10

Doc ID 2913 Rev 4

1.5KE Table 3. Electrical characteristics - parameter values (Tamb = 25 C)

IRM @ VRM Order code max. A 1.5KE6V8A/CA 1.5KE7V5A/CA 1.5KE10A/CA 1.5KE12A/CA 1.5KE15A/CA 1.5KE18A/CA 1.5KE22A/CA 1.5KE24A/CA 1.5KE27A/CA 1.5KE30A/CA 1.5KE33A/CA 1.5KE36A/CA 1.5KE39A/CA 1.5KE47A/CA 1.5KE56A/CA 1.5KE62A/CA 1.5KE68A/CA 1.5KE82A/CA 1.5KE100A/CA 1.5KE120A/CA 1.5KE150A/CA 1.5KE180A/CA 1.5KE200A/CA 1.5KE220A/CA 1.5KE250A/CA 1.5KE300A/CA 1.5KE350A/CA 1.5KE400A/CA 1.5KE440A/CA 1000 500 10 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V 5.8 6.4 8.55 10.2 12.8 15.3 18.8 20.5 23.1 25.6 28.2 30.8 33.3 40.2 47.8 53.0 58.1 70.1 85.5 102 128 154 171 188 213 256 299 342 376 VBR @ IR(1) min. V 7.14 7.88 10.5 12.6 15.8 18.9 23.1 25.2 28.4 31.5 34.7 37.8 41.0 49.4 58.8 65.1 71.4 86.1 105 126 158 189 210 231 263 315 368 420 462 mA 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VCL @ IPP 10/1000 s max. V 10.5 11.3 14.5 16.7 21.2 25.2 30.6 33.2 37.5 41.5 45.7 49.9 53.9 64.8 77 85 92 113 137 165 207 246 274 328 344 414 482 548 603 A 143 132 100 90 71 59.5 49 45 40 36 33 30 28 23.2 19.5 17.7 16.3 13.3 11 9.1 7.2 6.1 5.5 4.6 5.0 5.0 4.0 4.0 3.5 VCL @ IPP 8/20 s max. V 13.4 14.5 18.6 21.7 27.2 32.5 39.3 42.8 48.3 53.5 59.0 64.3 69.7 84 100 111 121 146 178 212 265 317 353 388 442 529 618 706 776 A 746 690 538 461 368 308 254 234 207 187 169 156 143 119 100 90 83 69 56 47 38 31.5 28 26 23 19 16 14 13

Characteristics

T(2) max. 10-4/ C 5.7 6.1 7.3 7.8 8.4 8.8 9.2 9.4 9.6 9.7 9.8 9.9 10.0 10.1 10.3 10.4 10.4 10.5 10.6 10.7 10.8 10.8 10.8 10.8 11 11 11 11 11

C(3) typ. pF 9500 8500 7000 6000 5000 4300 3700 3500 3200 2900 2700 2500 2400 2050 1800 1700 1550 1350 1150 1000 850 725 675 625 560 500 430 390 360

max. nom. V 6.45 7.13 9.5 11.4 14.3 17.1 20.9 22.8 25.7 28.5 31.4 34.2 37.1 44.7 53.2 58.9 64.6 77.9 95.0 114 143 171 190 209 237 285 332 380 418 V 6.8 7.5 10 12 15 18 22 24 27 30 33 36 39 47 56 62 68 82 100 120 150 180 200 220 250 300 350 400 440

1. Pulse test: tp < 50 ms (see Figure 2) 2. VBR = T (Tamb - 25) VBR(25 C) 3. VR = 0 V, F = 1 MHz. For bidirectional types, capacitance value is divided by 2.

Doc ID 2913 Rev 4

3/10

Characteristics Figure 2. Pulse definition for electrical characteristics

% Ipp 100 50 0 Repetitive pulse current tr = rise time (s) tp = pulse duration time (s)

1.5KE

tr

tp

Figure 3.

Peak pulse power dissipation versus initial junction temperature (printed circuit board)

Figure 4.

Peak pulse power versus exponential pulse duration

100% 80% Peak power (on printed circuit)

60%

40%

20% Tj initial 0% 0 20 40 60 80 100 120 140 160 180 200

Figure 5.

Clamping voltage versus peak pulse current

Figure 6.

Capacitance versus reverse applied voltage for unidirectional types (typical values)
1.5KE 1.5KE

1000

vcl (v)
1.5KE440A
100 % Ipp Tj initial = 25C

C (pF) 10000

1.5KE220A

7V 5 15 68 1 00

50 0

Tj = 25 C F = 1 MHz

1.5KE100A

tr

tp tr <10s

100

1.5KE56A

1.5KE
1000

1.5KE

1.5KE22A 1.5KE12A

10

100
1.5KE6V8A

tp = 20 s tp = 1 ms tp = 10 ms 1 0.1 1 10 100

Ipp (A) 1000

10 1 10 100 500

The curves of Figure 5 are specified for a junction temperature of 25 C before surge. The given results may be extrapolated for other junction temperatures by using the following formula: VBR = T (Tamb - 25) VBR (25 C). For intermediate voltages, extrapolate the given results.

4/10

Doc ID 2913 Rev 4

1.5KE

Characteristics

Figure 7.

Capacitance versus reverse applied Figure 8. voltage for bidirectional types (typical values)

Peak forward voltage drop versus peak forward current (typical values for unidirectional types)

10000

IFM (A) 500

Multiply by 2 for units with VBR > 220 V

F
100 1000

100

10

VFM (V) 10 1 10 100 500 1 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5

Figure 9.

Transient thermal impedance junction-ambient versus pulse duration

Figure 10. Relative variation of leakage current versus junction temperature

100

Zth (j-a) (C/W) Epoxy printed circuit board, FR4 copper thickness = 35 m

10

tp (s) 0.1 0.01 0.1 1 10 100 1000

Doc ID 2913 Rev 4

5/10

Ordering information scheme

1.5KE

Ordering information scheme

Figure 11. Ordering information scheme
1.5 KE 100 CA RL

Peak pulse power 1.5 = 1500 W Breakdown voltage 100 = 100 V Type A = Unidirectional CA = Bidirectional Delivery mode blank = Ammopack RL = Tape and reel

6/10

Doc ID 2913 Rev 4

1.5KE

Package information

Package information

Epoxy meets UL94, V0 Lead-free package

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Table 4. DO-201 dimensions
dimensions
B A B

Ref.

Millimeters Min. Max. 9.5

Inches Min. 0.335 1 Max. 0.374

D C

A B C D

8.5 25.4 4.8 0.96

5.3 1.06

0.189 0.038

0.209 0.042

Doc ID 2913 Rev 4

7/10

Package information Table 5. Marking

Marking(1) 1.5KE 6V8A 1.5KE 7V5A 1.5KE 10A 1.5KE 12A 1.5KE 15A 1.5KE 18A 1.5KE 22A 1.5KE 24A 1.5KE 27A 1.5KE 30A 1.5KE 33A 1.5KE 36A 1.5KE 39A 1.5KE 47A 1.5KE 56A 1.5KE 62A 1.5KE 68A 1.5KE 82A 1.5KE 100A 1.5KE 120A 1.5KE 150A 1.5KE 180A 1.5KE 200A 1.5KE 220A 1.5KE 250A 1.5KE 300A 1.5KE 350A 1.5KE 400A 1.5KE 440A 1.5KE6V8A 1.5KE7V5A 1.5KE10A 1.5KE12A 1.5KE15A 1.5KE18A 1.5KE22A 1.5KE24A 1.5KE27A 1.5KE30A 1.5KE33A 1.5KE36A 1.5KE39A 1.5KE47A 1.5KE56A 1.5KE62A 1.5KE68A 1.5KE82A 1.5KE100A 1.5KE120A 1.5KE150A 1.5KE180A 1.5KE200A 1.5KE220A 1.5KE250A 1.5KE300A 1.5KE350A 1.5KE400A 1.5KE440A Order code 1.5KE6V8CA 1.5KE7V5CA 1.5KE10CA 1.5KE12CA 1.5KE15CA 1.5KE18CA 1.5KE22CA 1.5KE24CA 1.5KE27CA 1.5KE30CA 1.5KE33CA 1.5KE36CA 1.5KE39CA 1.5KE47CA 1.5KE56CA 1.5KE62CA 1.5KE68CA 1.5KE82CA 1.5KE100CA 1.5KE120CA 1.5KE150CA 1.5KE180CA 1.5KE200CA 1.5KE220CA 1.5KE250CA 1.5KE300CA 1.5KE350CA 1.5KE400CA 1.5KE440CA Marking(1) 1.5KE 6V8CA 1.5KE 7V5CA 1.5KE 10CA 1.5KE 12CA 1.5KE 15CA 1.5KE 18CA 1.5KE 22CA 1.5KE 24CA 1.5KE 27CA 1.5KE 30CA 1.5KE 33CA 1.5KE 36CA 1.5KE 39CA 1.5KE 47CA 1.5KE 56CA 1.5KE 62CA 1.5KE 68CA 1.5KE 82CA 1.5KE 100CA 1.5KE 120CA 1.5KE 150CA 1.5KE 180CA 1.5KE 200CA 1.5KE 220CA 1.5KE 250CA 1.5KE 300CA 1.5KE 350CA 1.5KE 400CA 1.5KE 440CA

1.5KE

Order code 1.5KE6V8A 1.5KE7V5A 1.5KE10A 1.5KE12A 1.5KE15A 1.5KE18A 1.5KE22A 1.5KE24A 1.5KE27A 1.5KE30A 1.5KE33A 1.5KE36A 1.5KE39A 1.5KE47A 1.5KE56A 1.5KE62A 1.5KE68A 1.5KE82A 1.5KE100A 1.5KE120A 1.5KE150A 1.5KE180A 1.5KE200A 1.5KE220A 1.5KE250A 1.5KE300A 1.5KE350A 1.5KE400A 1.5KE440A

1.5KE6V8CA 1.5KE7VCA5 1.5KE10CA 1.5KE12CA 1.5KE15CA 1.5KE18CA 1.5KE22CA 1.5KE24CA 1.5KE27CA 1.5KE30CA 1.5KE33CA 1.5KE36CA 1.5KE39CA 1.5KE47CA 1.5KE56CA 1.5KE62CA 1.5KE68CA 1.5KE82CA 1.5KE100CA 1.5KE120CA 1.5KE150CA 1.5KE180CA 1.5KE200CA 1.5KE220CA 1.5KE250CA 1.5KE300CA 1.5KE350CA 1.5KE400CA 1.5KE440CA

1. Marking with space is used to differentiate assembly location.

8/10

Doc ID 2913 Rev 4

1.5KE

Ordering information

4
Table 6.

Ordering information
Order codes
Marking See Table 5 Package 1.5KE Weight 0.876g 600 Ammopack Base qty Delivery mode 1900 Tape and reel

Order code 1.5KExxxA/CA(1)

1. Where xxx is nominal value of VBR and A or CA indicates unidirectional or bidirectional version. See Table 3 for list of available devices and their order codes

5
Table 7.

Revision history
Document revision history
Date Feb -2002 12-Mar-2012 Revision 3A 4 Last issue Added UL statement,Table 5 and ordering information. Changes

Doc ID 2913 Rev 4

9/10

1.5KE

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to STs terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USERS OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com

10/10

Doc ID 2913 Rev 4