6424-1 LMS30 PDF
6424-1 LMS30 PDF
6424-1 LMS30 PDF
uk
M341
The Angus LMS30 stainless steel fire monitor is a simple and reliable design with a hand lever for movement and hand locks in both the horizontal and vertical axis. Stainless steel ball race bearings are used for the horizontal and vertical movement. All Angus LMS30 stainless steel monitors are based on a proven low maintenance design developed over 5 years of world-wide service. Monitor materials Stainless steel body to AISI 16 / SS316 Steering arm: SS316 Locking handles - SS316 Drain valve brass Bearing materials Stainless steel (SS316) double ball race bearings on both axis Inlet connection Standard flange 3 ANSI 150 RF (DIN and non standard flange options available) Outlet connection 3 BSP M (NH optional) Operating pressure Design pressure 16 bar Hydraulic factory test pressure 34 bar Performance Pressure loss at 3,000 l/min 0.8 bar. (For pressure losses at other flow rates refer to the pressure loss graph.) Weights and dimensions Weight 36 kg Optional paint finish Red Polyurethane
Note: when a large foam cannon is fitted a balance weight may have to be fitted to the monitor control handle.
Titan LMS30
-50
90
Fog/Jet Nozzles
360 Stop to Stop
-45
Movement 360 continuous rotation in the horizontal plane +90 / -45 movement in the vertical plane Outlet nozzle options Bronze bodies, manual controlled, fog/jet nozzles with shut off: FJ20 range: 200 to 2000 l/min Bronze bodies, manual controlled, fog/jet nozzles: FJ 1300 to 3000 l/min Stainless steel barrel with bronze base, aspirating foam cannons: FC 800 to 3000 l/min Stainless steel water jet pipes: WC 1500 and 3000 l/min A range of dry powder nozzles is also available refer to Angus Fire All foam cannons come with the option of a manually operated spreader. All nozzles and branchpipes come with the option of a self inducing foam connection. (For technical details of nozzles and branchpipes see separate data sheets.) Length and height of monitor water jet Maximum water throw 73m* at an angle of 32 Maximum height 41m* at an angle of 75
* Based on a FJ2800 nozzle, a flow of 3,000 l/min and a monitor inlet pressure of 9 bar.
Foam Cannons
360 Continuous
0.8
0.7
0.6
0.5
41m
73m
0.4
Maximum throw
0.3
0.2
Note: The jet throw depends on a number of variables such as wind direction, type and concentration of foam and the condition of the monitor water ways and nozzle. For throw and height calculations at different inlet pressures and flows and for different nozzles and angles refer to the Angus interactive electronic data sheet.
1000
1600
2200
2800
The Angus monitor range includes bronze models up to 8,500 l/min and stainless steel models up to 30,000 l/min. Most models are available with lever or gearbox control, automatic oscillation or with hydraulic or electric remote control. All are suitable for use where explosive atmospheres may be present. Angus is a company assessed to ISO 9001:2000
3400
Angus Fire. Angus Fire reserves the right to modify any specification without prior notice.