Canalta Parts Catalogue

S PART ENT OTHER M E AC H REPL IBLE WIT BRANDS T A P ING COM RY LEAD ST INDU DAY US TO T C S TA CON R DETAIL FO
Precision Machined for Accuracy, Reliability and Performance

Call Us Toll Free: 1-855-CANALTA
An ISO 9001:2008 registered company
Canalta Orifice Fitting Parts & Accessories
Phone: 403.342.4494 Email: [email protected] www.canaltaflow.com
Canalta Flow Measurement is a privately

held Canadian company that began operations in 1986 as an instrumentation and electrical contractor. Since 1991, the focus has been on the manufacture of industrial control and measurement equipment. The company now manufactures and services several product lines specifically targeting the oil and gas industries, and supplies product across North America, South America, Asia and the Middle East. Canalta has grown to include primary manufacturing and warehousing facilities in Red Deer, Alberta and Dallas, Texas, a direct sales office in Buenos Aires and an extensive global distribution network.
PARTS FOR ALL DUAL CHAMBER AND 8"+ SINGLE CHAMBER FITTINGS
Orifice Fitting Diagrams Dual Chamber Orifice Fitting Repair Kits Parts Variable by Model Size Common Parts for All Model Sizes Common Parts Specific to 16" - 26" Dual Chamber Orifice Fittings 6 14 16 22 26
Quality Matters
When you are in the market for parts, trust the OEM. The quality of Canalta Orifice Fitting parts and accessories is our top priority. Our standard zinc-plated 4130 carbon steel internals offer superior corrosion protection and resistance to sulfide or hydrogen induced cracking, providing reliability and performance over a long service life. These parts conform to NACE MR0175 / ISO 15156:2003 specifications. For extreme corrosive applications, such as wet H2S service, Canalta recommends 316 stainless steel internals to protect against mass loss due to general or localized corrosion. Standard plate seals and fitting O-rings are made of HNBR rubber, offering firstclass compression set, tearing and abrasion performance, as well as excellent chemical resistance in oilfield applicatons, including H2S and CO2. Wherever possible, Canalta has endeavoured to ensure that our parts and accessories offerings are interchangeable with the current industry standard orifice fitting brand, making Canalta Orifice Fitting parts and accessories suitable for re-builds and re-works of our competitors' product lines. All materials meet the applicable ASTM requirements and are traceable to the original foundry. Orifice plates and flow conditioners comply with AGA 3.2 specifications. Manufacturing at Canalta conforms to ASME codes B31.3-2004, B16.5-2003 and B16.34-2004. Close attention to detail and tight quality control auditing ensure that your Canalta Orifice Fitting parts and accessories are reliable and ready for service in any application.
PARTS FOR 2" - 6" SINGLE CHAMBER FITTINGS

Orifice Fitting Diagrams Parts Variable by Model Size Common Parts for All Model Sizes 30 31 33
28 34
36 40
ORIFICE PLATES & PLATE SEALS

Orifice Plate Seals Orifice Plates
FLOW CONDITIONING SOLUTIONS

Contour Flow Conditioners Contour FCH Flow Conditioner Housings Contour Vane Flow Straighteners 44 46 48
42
For more information, pricing or to order, contact us at

An ISO 9001:2008 Registered Company
Phone: 403.342.4494
Fax: 403.346.7110
Email: [email protected]
Web: www.canaltaflow.com
8"+ SINGLE CHAMBER

ORIFICE FITTINGS
PARTS FOR ALL DUAL CHAMBER &

Phone: 403.342.4494
Fax: 403.346.7110
8"+ SINGLE CHAMBER ORIFICE FITTINGS

9G 9B 58 8 8H 13 8K 11 50 4 28A
Item 2 4 5 8 8H 8K 9B 9G Qty. 1 1 1 1 1 1 1 1 A/R 1 1 1 1 2 1 A/R 1 1 1 1 2 2 4 1 3 3 1 Description Operating Wrench Flangnek Body Shaft and Pinions Plate Carrier Seal Ring K Style Retaining Ring Seal Bar O-ring Seal Bar Clamping Bar Screws Clamping Bar Orifice Plate Bearing Plug Stuffing Box Stuffing Box Gasket Packing Nut Packing Sleeves Complete Packing Set Stuffing Box Gland Stuffing Box Inner Gland Seal Stuffing Box Outer Gland Seal Bushing Retainer Drain Plug Meter Tap Plug Specification Plate Eccentricity Alignment Pins Eccentricity Alignment Pin Plugs Plate Carrier Alignment Screw
18/8 SS
Material
Coated Cast Iron WCB / LCC / SS
4130 YZP CS / 316 SS 4130 YZP CS / 316 SS
HNBR 316 SS HNBR 1018 YZP CS

Case Hardened 4140 CS
25A
11
22A
20
12
1018 YZP CS 304 SS / 316 SS 4130 YZP CS 4130 YZP CS 316 SS 4130 YZP CS Teflon Teflon 316 SS HNBR HNBR 316 SS A105 CS / 316L SS A105 CS / 316L SS Color Etched 316 SS 18/8 SS
25C
25E
13
26B
19
12 19 22A 25A 28E 56 31 55 30 55 56 55 56 31 30
26
26A
20
25
22A
25 25A-F 25S 26 26A 26B 28A-E 30 31 50 55 56 58
8" - 26" Single Chamber Models A/R = As Required per Model Size

Phone: 403.342.4494
Fax: 403.346.7110
2" - 14" DUAL CHAMBER ORIFICE FITTINGS

58 13 8H 32 9G 9B 52 14 10C 10E 10D 18A 17A 18D 3 15 19 22A 25A 28E 56 55 31 30 4 55 56 30 55 56 2 5B 17 4A
18GH
8K
11 12
54
23A 1H 1K 1J 1G 1D
Item 1 1G 1H 1D 1K 1J 2 3 Qty. 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 Description Equalizer Valve Assembly Equalizer Valve Stem Equalizer Valve Packing Nut Equalizer Ball Equalizer Packing Washer Equalizer Packing Operating Wrench Valve Strip Flangnek Body Body O-ring Shaft & Pinion Gears Slide Valve Indicator Plate Slide Valve Indicator Pointer Plate Carrier K Style Retaining Ring Seal Ring Seal Bar with O-ring Groove Seal Bar O-ring Bleeder Valve Body Bleeder Valve Needle Material
4130 YZP CS / 316 SS 4130 YZP CS / 316 SS 4130 YZP CS / 316 SS
50
33
23B
Item 10E 10G 11 12 13 14 15 16 17 17A 18A 18D 18FH 18GH 19 20 20A 22A 23 23A
Qty. 1 1 A/R 1 1 1 A/R 2 1 2 1 A/R 1 1 3 3 3 6 1 1
Description Bleeder Valve O-ring Bleeder Valve Set Screw Clamping Bar Screws Clamping Bar Orifice Plate Top Housing Valve Springs Valve Carrier Guides Valve Carrier Valve Carrier Stop Pins
Valve Seat (Grease type)
Material
HNBR
Item 23B 24
Qty. 1 1 3 A/R 1 3 3 3 3 2 2 A/R A/R 1 1 A/R 3 3 1
Description Grease Gun Body

Double Ball Grease Check Valve
Material
4130 YZP CS / 316 SS
316 SS
4130 YZP CS
24
25 25A-F 25S 26 26A 28A 28E 30 31 32 33 50 52 54 55 56 58
Packing Nuts Teflon Packing Sleeve Complete Packing Set Stuffing Box Glands Stuffing Box Inner Gland Seals Bushing Retainer - Stuffing Box
Bushing Retainer - Bearing Plug
316 SS
4130 YZP CS / 316 SS
1018 YZP CS 304 SS / 316 SS WCB / LCC / SS 316 SS CF8M SS

4130 YZP CS / CF8M SS
Teflon Teflon 316 SS HNBR 316 SS 316 SS A105 CS / 316L SS A105 CS / 316L SS A194 YZP CS - 2HM A193 YZP CS - B7M Color Etched 316 SS Color Etched 316 SS Grease 18/8 SS
10G
Teflon Coated Cast Iron 17.4PH - H1150 SS WCB / LCC / SS HNBR

18FH
4A 5
316 SS 4130 CS / CF8M SS 304 SS HNBR HNBR

4130 YZP CS 4130 YZP CS
Drain Plugs
Meter Tap Plugs (Qty = 6 with teletaps)
16 28A 25A 22A 20 25E 25C 26A 20A 26 25 5A
5A 5B 8 8K 8H 9G 9B 10C 10D
Cast Aluminum 316 SS

Valve Seat Screws Valve Seat Top O-ring Valve Seat Grease Port Seal Bearing Plug Stuffing Box Stuffing Box Outer Gland Seals Stuffing Box Gaskets Grease Gun Assembly Grease Gun Stem
Body Hex Nuts Body Studs Operating Plate Specification Plate Slide Valve Lubricant Eccentricity Alignment Pins Eccentricity Alignment Plugs Plate Carrier Alignment Screw
316 SS HNBR 1018 YZP HNBR

4130 YZP CS / 316 SS 4130 YZP CS / 316 SS
HNBR 316 SS
4130 YZP CS / 316 SS 4130 YZP CS / 316 SS
18/8 SS
2 - 14 Grease Type Dual Chamber Models A/R = As Required per Model Size
For exploded-view drawings of all Canalta Orifice Fittings, visit us online at www.canaltaflow.com
10
13B 8 58 12 11 50 52 52 9G 9B 1J 1H 24 33
18GH 18FH
1K
1G
1D
32
10H
23B
18A 23A 54 17A 18D 16 4A 28A 15 25B 17 4 22A 26B 25C 26A 25C 20 25E 26 25
5A
5B
55
56
31
30
16" DUAL CHAMBER ORIFICE FITTINGS
56
Item
1 1G 1H 1D 1K 1J 2 3 4 4A 5 5A 5B 8 13B
Qty.
1 1 1 1 1 1 2 1 1 1 3 2 1 1 1
Description
Equalizer Valve Assembly Equalizer Valve Stem Equalizer Valve Packing Nut Equalizer Ball Equalizer Packing Washer Equalizer Packing Operating Wrench Valve Strip Flangnek Body Body O-ring Shaft & Pinion Gears Slide Valve Indicator Plate Slide Valve Indicator Pointer Plate Carrier
Bonded FLEX Seal with Orifice Plate
Material
Item
18D 18FH 18GH 316 SS
4130 YZP CS / 316 SS
Qty.
A/R 1 1 20 22A Teflon Coated Cast Iron
17.4PH - H1150 SS
Description
Valve Seat Screws Valve Seat Top O-ring Valve Seat Grease Port Seal 6 6 23 23A 23B WCB / LCC / SS HNBR
Material
304 SS HNBR HNBR Stuffing Box Stuffing Box Gaskets 1 1 1 24 25 25A-F Cast Aluminum 316 SS
Phone: 403.342.4494
4130 YZP CS 316 SS Grease Gun Assembly Grease Gun Stem Grease Gun Body 1 6 A/R 25S 26 26A HNBR 26B 1 6 6 6 Double Ball Grease Check Valve Packing Nuts Teflon Packing Sleeve Complete Packing Set Stuffing Box Glands Stuffing Box Inner Gland Seals Stuffing Box Outer Gland Seals
316 SS 4130 YZP CS Teflon Teflon 316 SS HNBR HNBR
Fax: 403.346.7110 |
9G
9B 10H 11 12 14 15 16 17 17A 18A
1 1 1 A/R 1 1 A/R 2 1 2 1
Seal Bar with O-ring Groove Seal Bar O-ring Bleeder Valve Clamping Bar Screws Clamping Bar Top Housing Valve Springs Valve Carrier Guides Valve Carrier Valve Carrier Stop Pins Valve Seat (Grease type)
1018 YZP CS HNBR A105N CS

28A 30 31 32 1018 YZP CS WCB / LCC / SS 316 SS CF8M SS

6 2 2 A/R 33 50 52 54 55 316 SS
4130 CS / CF8M SS
Bushing Retainer - Stuffing Box Drain Plugs

316 SS
A105 CS / 316L SS A105 CS / 316L SS
Hex Nuts A/R 1 2 A/R 3 56 58 3 1 Body Studs Specification Plate Operating Plates Slide Valve Lubricant Eccentricity Alignment Pins
Eccentricity Alignment Pin Plugs
A194 YZP CS - 2HM A193 YZP CS - B7M Color Etched 316 SS Color Etched 316 SS
Grease 18/8 SS
Email: [email protected] |
Plate Carrier Alignment Screw
18/8 SS
16 Grease Type Dual Chamber Models A/R = As Required per Model Size
11
12
8H 8 41L 58 37C 12 11 50 42B 42C 42A 5 36 35B 52 41R 41B 9G 9B 44E 44C 44A 44B 44D 1J 1H 33 3 24
18GH 18FH
14 32 10H
1K
1G
1D
23B
18A 23A 54 17A 18D 16 4A 28A 15 25B 17 4 5A 22A 26B 25C 25C 20 25E 26 26A 25
5B
55
56
31
30
18" - 30" DUAL CHAMBER ORIFICE FITTINGS
56
Item
1 1G 1H 1D 1K 1J 2 3 4 4A 5 5A 5B 8
Qty.
1 1 1 1 1 1 2 1 1 1 4 2 1 1
Description
Equalizer Valve Assembly Equalizer Valve Stem Equalizer Valve Packing Nut Equalizer Ball Equalizer Packing Washer Equalizer Packing Operating Wrench Valve Strip Flangnek Body Body O-ring Shaft & Pinions Slide Valve Indicator Plate Slide Valve Indicator Pointer Plate Carrier
Material
Item
23B 24 25 316 SS
4130 YZP CS / 316 SS
Qty.
2 2 6 25A-F 25S Teflon Coated Cast Iron 17.4PH - H1150 SS WCB / LCC / SS HNBR
Description
Grease Gun Body Double Ball Grease Check Valve Packing Nuts A/R 1 26 26A 26B 28A 30 31 Cast Aluminum 316 SS
Material
4130 YZP CS / 316 SS
316 SS 4130 YZP CS Teflon Packing Sleeve Complete Packing Set 6 6 6 6 2 2 32 33 35B A/R A/R 2 Stuffing Box Glands Stuffing Box Inner Gland Seals Stuffing Box Outer Gland Seals Bushing Retainer - Stuffing Box Drain Plugs
Phone: 403.342.4494
Teflon
Teflon 316 SS HNBR HNBR 316 SS A105 CS / 316L SS A105 CS / 316L SS Hex Nuts Body Studs External Shaft Roller A194 YZP CS - 2HM A193 YZP CS - B7M 1018 CS
Fax: 403.346.7110 |
9G
9B 10H 11 12 13B 14 15 16 17 17A 18A 18D 18FH 18GH 20 22A 23 23A
1 1 1 A/R 1 1 1 A/R 2 1 2 1 A/R 1 1 6 6 2 2
Seal Bar with O-ring Groove Seal Bar O-ring Bleeder Valve Clamping Bar Screws Clamping Bar Bonded FLEX Seal with Orifice Plate Top Housing Valve Springs Valve Carrier Guides Valve Carrier Valve Carrier Stop Pins Valve Seat (Grease type) Valve Seat Screws Valve Seat Top O-ring Valve Seat Grease Port Seal Stuffing Box Stuffing Box Gaskets Grease Gun Assembly Grease Gun Stem
1018 YZP CS HNBR

4130 YZP CS / 316 SS
36 37C 41 41B 1018 YZP CS HNBR WCB / LCC / SS 316 SS CF8M SS

1 4 1 4 42A 42B 42C 44A 44B 44C 316 SS 4130 CS / CF8M SS 304 SS HNBR HNBR 4130 YZP CS 55 316 SS
4130 YZP CS / 316 SS 4130 YZP CS / 316 SS
External Shaft Shaft Bushing Plate Carrier Guide (left & right) Plate Carrier Guide Bolts 1 1 1 1 1 1 44D 44E 50 52 54 1 1 1 2 A/R 3 56 58 3 1 Plate Carrier Stop Plate Carrier Stop Bolt Plate Carrier Stop Bushing Travel Brake Body Brake Band Brake Adjustment Bolt Brake Sleeve Hex Head Bolt Specification Plate Operating Plates Slide Valve Lubricant Eccentricity Alignment Pins Eccentricity Alignment Pin Plugs Plate Carrier Alignment Screw
1018 CS Brass Cast Carbon Steel YZP Steel Carbon Steel B7 Bolting Brass WCB Steel Brass YZP Steel Carbon Steel Steel Color Etched 316 SS
Email: [email protected] |
Color Etched 316 SS Grease 18/8 SS
18/8 SS
16 Grease Type Dual Chamber Models A/R = As Required per Model Size
13

Phone: 403.342.4494 FULL REPAIR KITS
Fax: 403.346.7110
DUAL CHAMBER / 8"+ SINGLE CHAMBER ORIFICE FITTING PARTS
CANALTA ORIFICE FITTING REPAIR KITS

include a full complement of orifice fitting parts, allowing for a complete rebuild of the orifice fitting or replenishment of spare parts inventory. These kits are available with 4130 yellow zinc plated carbon steel internals for standard applications, or 316 stainless steel internals for extreme corrosive applications. All repair kits include high grade HNBR internal seals and are packaged in a sturdy resin case for easy storage or transport. Repair kits for Daniel Senior Orifice Fittings are equally comprehensive, substituting Garlock gaskets for the standard Canalta body, valve seat and seal bar O-ring seals. These parts can also be supplied on an individual basis. Please contact us for full details on our servicing of Daniel product lines.*
Canalta Dual Chamber Orifice Fitting Repair Kit

4130 YZP Carbon Steel Trim Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Part Number KIT-C-2DC KIT-C-3DC KIT-C-4DC KIT-C-6DC KIT-C-8DC KIT-C-10DC KIT-C-12DC KIT-C-14DC KIT-C-16DC KIT-C-20DC KIT-C-24DC KIT-C-26DC 316 Stainless Steel Trim Part Number KIT-C-2DCSS KIT-C-3DCSS KIT-C-4DCSS KIT-C-6DCSS KIT-C-8DCSS KIT-C-10DCSS KIT-C-12DCSS KIT-C-14DCSS KIT-C-16DCSS KIT-C-20DCSS KIT-C-24DCSS KIT-C-26DCSS Notes
Daniel Senior Orifice Fitting Repair Kit

4130 YZP Carbon Steel Trim Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Part Number KIT-D-2DC KIT-D-3DC KIT-D-4DC KIT-D-6DC KIT-D-8DC KIT-D-10DC KIT-D-12DC KIT-D-14DC KIT-D-16DC KIT-D-20DC KIT-D-24DC KIT-D-26DC 316 Stainless Steel Trim Part Number KIT-D-2DCSS KIT-D-3DCSS KIT-D-4DCSS KIT-D-6DCSS KIT-D-8DCSS KIT-D-10DCSS KIT-D-12DCSS KIT-D-14DCSS KIT-D-16DCSS KIT-D-20DCSS KIT-D-24DCSS KIT-D-26DCSS Notes
Trust Canalta Flow Measurement for high quality, competitively priced OEM and interchangeable orifice fitting parts kits.
85 Edition - Add suffix "85" to part number. 2000 Edition - Add suffix "00" to part number.
YZP = Yellow Zinc Plated
* Daniel and Senior are registered trademarks of Daniel Industries, Inc. Daniel Industries, Inc. is not affiliated with Canalta Flow Measurement in any manner. Daniel Industries has not reviewed, sanctioned or endorsed any products manufactured, reconditioned, sold or marketed by Canalta Flow Measurement.
14
15

Phone: 403.342.4494
Fax: 403.346.7110

#5 Shaft & Pinion Gears
VARIABLE BY MODEL SIZE

#3 Valve Strip #17 Valve Carrier
#8
Plate Carrier
Shaft for 2" - 14" Model Sizes
Shaft for 16" - 30" Model Sizes
17.4PH - H1150 Stainless Steel

Downstream Face View Upstream Face View
Available in 4130 YZP carbon steel or CF8M cast stainless steel. Shafts for model sizes 16" and larger are of the dual wrench design.
4130 YZP Carbon Steel Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Part Number 260DC05 360DC05 460DC05 660DC05 860DC05 1060DC05 1260DC05 1460DC05 1660DC05 2060DC05 2460DC05 2660DC05 Notes CF8M Stainless Steel Part Number 260DC05-SS 360DC05-SS 460DC05-SS 660DC05-SS 860DC05-SS 10600DC05-SS 1260DC05-SS 1460DC05-SS 1660DC05-SS 2060DC05-SS 2460DC05-SS 2660DC05-SS Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Notes
Model Size 2
Part Number 260DC03 360DC03 460DC03 660DC03 860DC03 1060DC03 1260DC03 1460DC03 1660DC03 2060DC03 2460DC03 2660DC03
Notes
Available in 4130 YZP carbon Steel or CF8M cast stainless steel. 85 Edition - Add suffix "85" to part number. 92 Edition - Add suffix "92" to part number.
4130 YZP Carbon Steel Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Part Number 260DC08-92 360DC08-92 460DC08-92 660DC08-92 860DC08-00-625 1060DC08 1260DC08 1460DC08 1660DC08 2060DC08 2460DC08 2660DC08 Notes CF8M Stainless Steel Part Number 260DC08-92-SS 360DC08-92-SS 460DC08-92-SS 660DC08-92-SS 860DC08-00-625-SS 10600DC08-SS 1260DC08-SS 1460DC08-SS 1660DC08-SS 2060DC08-SS 2460DC08-SS 2660DC08-SS Notes
Available in 4130 YZP carbon steel or CF8M cast stainless steel.

4130 YZP Carbon Steel Part Number 260DC17 360DC17 460DC17 660DC17 860DC17 1060DC17 1260DC17 1460DC17 1660DC17 2060DC17 2460DC17 2660DC17 Notes CF8M Stainless Steel Part Number 260DC17-SS 360DC17-SS 460DC17-SS 660DC17-SS 860DC17-SS 1060DC17-SS 1260DC17-SS 1460DC17-SS 1660DC17-SS 2060DC17-SS 2460DC17-SS 2660DC17-SS Notes
3 4 6 8 10 12 14 16 20 24 26
Indicates parts also applicable to 8" and larger model sizes of the Single Chamber Orifice Fitting.
16
17

Phone: 403.342.4494
Fax: 403.346.7110

#9B #9G Seal Bar Seal Bar O-ring

18A Valve Seat - Grease Style
18B Valve Seat - Soft Seat Style
HNBR Rubber. Available for 150 - 900 or 1500 ANSI ratings in 1018 YZP carbon steel. Requires one seal bar O-ring (#9B).
150 - 900 ANSI Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Part Number 260DC09G 360DC09G 460DC09G 660DC09G 860DC09G 1060DC09G 1260DC09G 1460DC09G 1660DC09G 2060DC09G 2460DC09G 2660DC09G Notes 1500 ANSI Part Number 2150DC09G 3150DC09G 4150DC09G 6150DC09G 8150DC09G 10150DC09G 12150DC09G 14150DC09G 16150DC09G 20150DC09G 24150DC09G 26150DC09G Notes 150 - 900 ANSI Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Part Number O238-80H O247-80H O250-80H O261-80H O265-80H O269-80H O275-80H O277-80H O280-80H O283-80H O388-80H O391-80H Notes 1500 ANSI Part Number O345-80H O427-80H O436-80H O437-80H O445-80H O374-80H O275-80H O277-80H O456-80H O283-80H O388-80H Please Call Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Notes
Available in 4130 carbon steel or CF8M cast stainless steel. This unit incorporates a machined grease port for slide valve lubrication. Requires one valve seat O-ring (#18FH), one valve seat grease seal (#18GH) and slide valve lubricant (#54). Suitable for 150-1500 ANSI ratings. Available in 4130 carbon steel or CF8M cast stainless steel. This unit incorporates a specially machined seal channel to help prevent O-ring dislocation. Requires two valve seat O-rings (#18FH). Suitable for 150-1500 ANSI ratings.
4130 Carbon Steel Part Number 260DC18B 360DC18B 460DC18B 660DC18B 860DC18B 1060DC18B 1260DC18B 1460DC18B 1660DC18B 2060DC18B 2460DC18B 2660DC18B Notes CF8M Stainless Steel Part Number 260DC18B-SS 360DC18B-SS 460DC18B-SS 660DC18B-SS 860DC18B-SS 1060DC18B-SS 1260DC18B-SS 1460DC18B-SS 1660DC18B-SS 2060DC18B-SS 2460DC18B-SS 2660DC18B-SS Notes 4130 Carbon Steel Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Part Number 260DC18A 360DC18A 460DC18A 660DC18A 860DC18A 1060DC18A 1260DC18A 1460DC18A 1660DC18A 2060DC18A 2460DC18A 2660DC18A Notes CF8M Stainless Steel Part Number 260DC18A-SS 360DC18A-SS 460DC18A-SS 660DC18A-SS 860DC18A-SS 1060DC18A-SS 1260DC18A-SS 1460DC18A-SS 1660DC18A-SS 2060DC18A-SS 2460DC18A-SS 2660DC18A-SS Notes
Indicates parts also applicable to 8" and larger model sizes of the Single Chamber Orifice Fitting.
Note: 4" 1500 ANSI models require a specially-sized valve seat. Please use part numbers 4150DC18A or 4150DC18A-SS for these models.
18
Note: 4" 1500 ANSI models require a specially-sized valve seat. Please use part numbers 4150DC18B or 4150DC18B-SS for these models.
19

Phone: 403.342.4494
Fax: 403.346.7110

#12 Clamping Bar
#33
Body Studs
#18FH Valve Seat O-ring
#4A
Body O-ring
Available for 150 - 900 or 1500 ANSI ratings in 1018 YZP carbon steel. Requires corresponding clamping bar screws (#11).
150 - 900 ANSI HNBR Rubber Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Part Number O236-80H O243-80H O248-80H O258-80H O263-80H O268-80H O273-80H O277-80H O279-80H O282-80H O387-80H O390-80H Notes Model Size 2 3 4 6 8 10 12 14 16 20 24 26 Part Number 260DC12 360DC12 460DC12 660DC12 860DC12 1060DC12 1260DC12 1460DC12 1660DC12 2060DC12 2460DC12 2660DC12 Notes 1500 ANSI Part Number 2150DC12 3150DC12 4150DC12 6150DC12 8150DC12 10150DC12 12150DC12 14150DC12 16150DC12 20150DC12 24150DC12 26150DC12 Notes Model Size 2 3 4 6 8 10 12 14 16 20 24 26 HNBR Rubber Part Number O257-80H O365-80H O367-80H O373-80H O378-80H O380-80H O456-80H O460-80H O465-80H O471-80H O473-80H O475-80H Notes Model Size 2 3 4 6 8 10 12 14 16 20 24 26
A193 YZP CS - B7M alloy bolting.

Short Studs Part Number (QTY) DC33S58-214 (11) DC33S58-214 (14) DC33S34-212 (14) DC33S34-318 (15) DC33S34-312 (19) DC33S34-312 (17) DC33S34-334 (22) DC33S34-334 (24) DC33S1-418(28) DC33S1-458 (37) DC33S1-458 (37) Please Call Notes Long Studs Part Number (QTY) DC33S58-318 (3) DC33S58-318 (1) DC33S34-312 (1) DC33S34-312(3) N/A N/A N/A N/A N/A N/A N/A N/A Notes
Note: These part numbers also apply for item 18EH, "Valve Seat Bottom O-ring" for soft seat orifice fitting models.
YZP = Yellow Zinc Plated Indicates parts also applicable to 8" and larger model sizes of the Single Chamber Orifice Fitting.
20
21

Phone: 403.342.4494
Fax: 403.346.7110
COMMON TO ALL MODEL SIZES
Item 1 1 2 10 10 11 11 15 16 17A
Part Number C60DC01 C60DC01SS C60DC02 C60DC10 C60DC10SS C60DC11 C150DC11 C60DC15 C60DC16 C60DC17
Material
4130 YZP CS
Description Equalizer Valve Assembly Equalizer Valve Assembly Operating Wrench Bleeder Valve Bleeder Valve
Notes
Item 18D 18GH 19 19 20 22A 23 23 24 25 25S
Part Number C60DC18 O008-80H C60DC19 1260DC19 C60DC20 C60DC22A C60DC23 C60DC23SS C60DC24 C60DC25 C60DC25S2
Material
304 SS
Description Valve Seat Screw Vavle Seat Grease Port Seal Bearing Plug Extended Bearing Plug Stuffing Box Stuffing Box Gasket Grease Gun Assembly Grease Gun Assembly Grease Check Valve Packing Nut Teflon Packing Set
Notes
316 SS
HNBR
Coated Cast Iron
4130 YZP CS
Note: stainless steel version available by special order. Please contact us for detials. Note: this part is used only on size 12" models of the DC and SC orifice fitting. Note: stainless steel version available by special order. Please contact us for detials.
4130 YZP CS
4130 YZP CS
316 SS
4130 YZP CS
Case Hardened Clamping Bar Screw (150-900 ANSI) 4140 CS Case Hardened Clamping Bar Screw (1500 ANSI) 4140 CS
316 SS
316 SS
4130 YZP CS
Valve Spring Valve Carrier Guide Valve Carrier Stop Pin
316 SS
CF8M SS
316 SS
316 SS
4130 YZP CS
Note: stainless steel version available by special order. Please contact us for detials.
YZP CS = Yellow Zinc Plated Carbon Steel Indicates parts also applicable to 8" and larger model sizes of the Single Chamber Orifice Fitting.
Teflon
22
23

Phone: 403.342.4494
Fax: 403.346.7110
Item 26 26A 26B 28E 28A 28B 30 31 32 32
Part Number C60DC26SS O016-80H O118-80H C60DC28ESS C60DC28ASS C60DC28BSS C60DC30 C60DC31 DC32S58 DC32S34
Material
316 SS
Description Stuffing Box Gland Inner Gland Seal Outer Gland Seal 3/8" Bushing Retainer 3/4" Bushing Retainer 1 3/4" Bushing Retainer Drain Plug - 3/4" NPT Meter Tap Plug - 1/2" NPT 5/8" Body Nut 3/4" Body Nut
Notes
Item 32 50 52 53 54 55 56 58 58 5A 5B
Part Number DC32S1 C60DC50 C60DC52 C60DC53 C60DC54-340B C60DC55 C60DC40A C60DC58 C60SC58 C60DC05A C60DC05B
Material
A194 YZP CS 2HM Color Etched 316 SS Color Etched 316 SS 10 Guage Stainless Steel
Description 1" Body Nut Specification Plate Operating Plate Soft Seat Warning Plate Slide Valve Lubricant Eccentricity Alignment Pins Eccentricity Alignment Plugs
Notes
HNBR
HNBR
316 SS
316 SS
Grease
316 SS
18-8 SS
A105 CS
A105 CS
18-8 SS
Plate Carrier Alignment Screw (DC) Plate Carrier Alignment Screw (SC)
A194 YZP CS 2HM A194 YZP CS 2HM
Cast Aluminum
Slide Valve Indicator Plate Slide Valve Indicator Pointer
YZP CS = Yellow Zinc Plated Carbon Steel Indicates parts also applicable to 8" and larger model sizes of the Single Chamber Orifice Fitting.
316 SS
24
25

Phone: 403.342.4494
Fax: 403.346.7110
COMMON PARTS SPECIFIC TO 16" - 30" DUAL CHAMBER MODELS
Item 16 44A 44B 44B 44C 44D 44E 41L(R) 41L(R) 41L(R) 41B 42A
Part Number CL60DC16 C60DC44A C60DC44B 2660DC44B C60DC44C C60DC44D C60DC44E 2060DC41-L(R) 2460DC41-L(R) 2660DC41-L(R) C60DC41B C60DC42A
Material
1018 CS
Description Valve Carrier Guides (with screws)
Notes Item 42C Part Number C60DC42C C60DC42B 2060DC36 2460DC36 2660DC36 3060DC36 C60DC35B 2660DC35B C60DC37C 2660DC37C CL60DC10 Material
Brass
Description Plate Carrier Stop Bushing Plate Carrier Stop Bolt 20" External Shaft 24" External Shaft 26" External Shaft 30" External Shaft External Shaft Roller (20" & 24") External Shaft Roller (26") External Shaft Bushing (20" & 24") External Shaft Bushing (26") Gate Valve (with pipe nipple)
Notes
WCB Steel
Travel Brake Body 42B

B7 Bolting
Brass
Travel Brake Band (20" & 24") 36

1018 CS
Brass
Travel Brake Band (26") 36

1018 CS
YZP Steel
Travel Brake Adjustment Bolt 36

1018 CS
Carbon Steel
Travel Brake Sleeve 36

1018 CS
Steel
Travel Brake Hex Head Bolt 35B

1018 CS
Cast Carbon Steel Cast Carbon Steel Cast Carbon Steel
Plate Carrier Guide - Left (Right) (20") 35B Plate Carrier Guide - Left (Right) (24") 37C Plate Carrier Guide - Left (Right) (26") 37C
Brass Brass 1018 CS
YZP Steel
Plate Carrier Guide Bolt 10H

A105N CS
Carbon Steel
Plate Carrier Stop
26
27

Phone: 403.342.4494
Fax: 403.346.7110
2" - 6" SINGLE CHAMBER

ORIFICE FITTINGS
PARTS FOR
28
29

Phone: 403.342.4494
Fax: 403.346.7110
SC 2-6 ORIFICE FITTING PARTS
13 8K 11
8H
8G
#9A Seal Bar
9A 7
#8G Plate Carrier
Item 4 5 5A 6 7 8G 8H 8K 9A 9B 11 12 13 30 31 50
Qty. 1 2 2 1 1 1 1 1 1 1 A/R 1 1 1 4 1
Description Flangenek Body Plate Carrier Bolt Lock Washer Seal Bar Alignment Pin Plate Carrier Alignment Pin Plate Carrier Seal Ring K Style Retaining Ring Seal Bar Seal Bar O-ring Clamping Bar Screw Clamping Bar Orifice Plate Drain Plug Meter Tap Plug Specification Plate
Material
WCB / LCC / SS 316 SS 316 SS
9B 5A 5 6 12 31 50
Available for 150 - 900 or 1500 ANSI ratings in 1018 YZP carbon steel. Requires one seal bar O-ring (#9B).
150 - 900 ANSI 1500 ANSI
31
Available in 4130 carbon steel or CF8M cast stainless steel. 85 Edition - Add suffix "85" to part number. 92 Edition - Add suffix "92" to part number.
4130 YZP Carbon Steel Size (Inches) 2 3 4 6 Part Number 260SC08 360SC08 460SC08 660SC08 Notes CF8M Stainless Steel Part Number 260SC08-SS 360SC08-SS 460SC08-SS 660SC08-SS Notes
HNBR 316 SS 1018 YZP CS HNBR

Size (Inches) 2 3 4 6
Part Number 260SC09A 360SC09A 460SC09A 660SC09A
Notes
Part Number 2150SC09A 3150SC09A 4150SC09A 6150SC09A
Notes
4140 YZP CS 304 SS / 316 SS

A105 CS / 316L SS A105 CS / 316L SS
Color Etched 316 SS
30 4
2" - 6" Single Chamber Models A/R = As Required per Model Size
30
31

Phone: 403.342.4494
Fax: 403.346.7110
SC 2-6 ORIFICE FITTING PARTS
Item 5
Part Number C60SC05
Material 316 SS Plate Carrier Bolt
Description
Notes
#12
Clamping Bar
5A
C60SC05A
316 SS
Plate Carrier Lock Washer
#9B
Seal Bar O-ring
C60SC51
Seal Bar Alignment Pin
C60SC07
Plate Carrier Alignment Pin

Case Hardened Clamping Bar Screw (150-900 ANSI) 4140 CS Case Hardened Clamping Bar Screw (1500 ANSI) 4140 CS
11
Available for 150 - 900 or 1500 ANSI ratings in 1018 YZP carbon steel. Requires corresponding clamping bar screws (#11).
C60DC11
11
C150DC11
150 - 900 ANSI HNBR Rubber Size (Inches) 2 3 4 6 Part Number O241-80H O245-80H O250-80H O259-80H Notes Size (Inches) 2 3 4 6
1500 ANSI
30
Part Number 260SC12 360SC12 460SC12 660SC12 Notes Part Number 2150SC12 3150SC12 4150SC12 6150SC12 Notes
C60DC30
A105 CS
Drain Plug - 3/4" NPT
31
C60DC31
A105 CS
Color Etched 316 SS
Meter Tap Plug - 1/2" NPT
50
C60SC50
Specification Plate
32
33

Phone: 403.342.4494
Fax: 403.346.7110
34
35

Phone: 403.342.4494
Fax: 403.346.7110

The Type "K" Standard 2000 Edition Seal Assembly is the standard seal supplied with all Canalta Orifice Fitting model sizes 2" through 8". The assembly is comprised of a HNBR elastomer seal and stainless steel retaining ring. The single downstream seal function offers superior sealing capability while reducing seal damage during insertion. This design cuts in half the seal's compressible material, resulting in less seal swell common in most applications. The durability of the stainless steel retaining ring leads to replacement costs of approximately 1/3 that of other plate seals. Exacting and repeatable concentricity is maintained with the metal to metal contact throughout the entire 360 circumference of the orifice plate to the plate carrier mechanism. This unit is used with a .562" seal gap for fittings sized 2" through 6", and with a .688" seal gap for 8" fittings, meeting the 1992 and 2000 editions of AGA-3. Plate seal bypass tested down to 1" water column. The Teflon Snap Seal provides positive plate sealing in the harshest of process environments. The two-piece design snaps over the orifice plate without the use of metal clips or retainers. A specially designed recess absorbs insertion pressures, minimizing permanent compression and distortion. The raised section adjacent to the recess creates a positive seal against the orifice plate, preventing bypass leakage. These two unique design features enhance seal performance while extending the life expectancy of the seal assembly.
Teflon Snap Seal Set Model Size 2 HNBR Elastomer Seal Ring Model Size 2 3 4 6 8 Part Number
2DC08H-00-HNBR-80D 3DC08H-00-HNBR-80D 4DC08H-00-HNBR-80D 6DC08H-00-HNBR-80D 8DC08H-00-HNBR-80D
Teflon Snap Seals are available for 2000 Edition seal gaps. 85 Edition snap and clipstyle Teflon seals are also available for some sizes. Please contact our offices for more information.
Notes
Part Number 260DC08IJ-00 360DC08IJ-00 460DC08IJ-00 660DC08IJ-00 860DC08IJ-00 1060DC08IJ-00 1260DC08IJ-00 1460DC08IJ-00 1660DC08IJ-00 2060DC08IJ-00 2460DC08IJ-00 2660DC08IJ-00
316 Stainless Steel "K" Style Retainer Ring Notes Part Number 2DC08K 3DC08K 4DC08K 6DC08K 8DC08K Notes
3 4 6 8 10 12 14 16 20 24 26
HNBR SEAL RING
ORIFICE PLATE
STAINLESS STEEL RETAINING RING TEFLON SNAP RING ORIFICE PLATE
TEFLON SNAP RING
FLOW
FLOW
BEVEL BEVEL
36
37

Phone: 403.342.4494
Fax: 403.346.7110

The Bonded "FLEX" Seal is the standard seal supplied with all Canalta Orifice Fitting model sizes 10" and larger. Designed with a unique "hollow core" recess, this seal has impressive expansion and contraction capabilities when compared to traditional solid rubber seals. The recess allows the seal to absorb insertion pressures, minimizing tearing, distortion and permanent compression. This design will also accomodate expansion and distortion in the seal gap when under pressure - a problem common to many large-sized fittings. The 80 duro HNBR seal is adhesively bonded to the orifice plate, creating total and permanent contact between the plate and seal and preventing bypass leakage. These units are typically supplied as seal and orifice plate packages and are available for model sizes 10" and larger. For ordering information, please contact us, or visit us on the web at www.canaltaflow.com
Legacy Replacement Seals

Canalta supplies a selection of legacy plate seals for situations in which direct and exact seal replacement is required or preferred. Models include two piece clip-style Teflon, solid core HNBR or Nitrile and the stainless steel dual ring assembly. We will also work with you to custom design and manufacture purpose-built seals for your unique or special applications. Size and pipe schedule availabilty varies by model. Please contact us for more information. Stainless Steel Dual Ring
Clip-style Teflon Solid Core HNBR
FLOW
BEVEL
38
39

Phone: 403.342.4494
Fax: 403.346.7110
for years. We stock a wide selection of standard concentric universal orifice plates for gas and liquid flow measurement in both 304 and 316 stainless steel. These units are perfect for any Single or Dual Chamber Orifice Fitting. Paddle plates for use with Orifice Flange Unions and orifice plates for special applications are available. Canalta also supplies orifice plates in exotic materials, such as MonelTM, InconelTM and HastelloyTM. When accuracy and certainty count, Canalta can provide comprehensive Orifice Plate Inspection Reports complete with calibration certificates and mill test reports.
INLET 2 600 316 SS 0.625 CANALTA
Canalta has been a trusted supplier of AGA-3 / API 14.3 and ISO 5167-1 Compliant Orifice Plates
Contact us today to find out more about our comptetitive pricing and and quick delivery times on all types
of orifice plates.
45
INLET 2 600 2 316 SS 0.625 CANALTA
INLET 600 316 SS 0.625 CANALTA
Concentric Paddle Plate
Concentric Universal Plate
Bevel Profile
Vented Orifice Plate
Eccentric Orifice Plate
Segmental Orifice Plate
Counter-bored Orifice Plate
Quadrant-bored Orifice Plate
Concentric Restriction Plate
40
41

Phone: 403.342.4494
Fax: 403.346.7110
42
43

Phone: 403.342.4494
Fax: 403.346.7110
E4
D4 B4
D6 B6
E6
45
by
E2
C2
C4
E8
1 8 .5 0
29
7.750
reducing upstream pipe length requirements. This common design fully develops the flow profile and helps to eliminate flow disturbances without creating a significant pressure drop. Accurate flow metering is possible in a host of line configurations, including multiple elbows in or out of plane, tee intersections and partially closed or nominally opened valves. Installation, maintenance and initial capital cost are easy and economical, and the resilient one-piece design ensures a long service life. Standard 316 stainless steel makes these flow conditioners suitable for all applications, including extremely corrosive environments. Contour 50 Flow Conditioners are designed and manufactured to the exact geometries of the popular K-Lab / Nova design (CPA 50E) which has achieved broad acceptance within the flow measurement industry. Contour Z Flow Conditioners include the 32-hole Zanker plate geometry. Contour 50F and ZF Flange-style Flow Conditioners are installed between two raised face or RTJ flanges upstream of the orifice plate. Available for pipe sizes 2" through 30" in all standard schedules, with custom schedules by special order. Contour 50P and ZP Pin-style Flow Conditioners are line mounted with a 3/4" set pin in the wall of the upstream pipe. Available for pipe sizes 2" through 30" in all standard schedules, with custom schedules by special order. Contact one of our sales representatives today for full details, technical specifications and ordering information.
* CPA 50E is a registered trademark of Canada Pipeline Accessories Co. Ltd. Daniel Industries, Inc. (Zanker) and Canada Pipeline Accessories are not affiliated with Canalta Flow Measurement in any manner, nor have they reviewed, sanctioned or endorsed any products manufactured, reconditioned, sold or marketed by Canalta Flow Measurement.
Contour 50 and Z Flow Conditioners maximize orifice meter accuracy while significantly
D2 6.605 0
B2
A4 A3
A2
B8
D8
D1
B1
A1
B7
D7
5.
96
3
96 9
E3
31
D3
D5
E5
4.
3. 7
10
0.150 0.828
5. 6
0
1 .6 56
44
11. 6
E1
C1
B3
B5
C3
E7
45

Phone: 403.342.4494
Fax: 403.346.7110
by
The Contour FCH Flow Conditioner Housing brings the ease, safety and practicality of inspecting
and changing an orifice plate to the flow conditioner. This long overdue concept allows for regular inspections of the flow conditioner without breaking apart the flow line. The Contour FCH allows the operator to easily perform flow conditioner inspection and maintenance on the same regular schedule as the orifice plate. With this innovative, newly patented design, you can be sure that your flow profile has not been degraded by damage, blockage or residue accumulation. All bore surfaces and internal dimensions within the housing are manufactured to strictly comply with the latest editions of AGA-3 and ISO-5167. The Contour FCH is effective for both ultrasonic and differential pressure custody transfer applications, where flow profile and measurement accuracy are critical. The body connects to the line upstream of the flow conditioning plate through an integral body flange. This design virtually eliminates flow disturbances caused by RF and RTJ flange breaks, making your flow profile that much more reliable. Approved for 150 - 900 ANSI ratings, these integral body flanges also reduce costs by eliminating material and fabrication procedures.
12 Dual Chamber Model
Canalta's Contour FCH utilizes the new Contour 50+ and Z+ flow conditioners. These isolating flow conditioners incorporate a nonprotruding HNBR seal around the downstream face to prevent bypass leakage and protect the integrity of your flow profile.
6 Single Chamber Model
US Patent 7, 806,145
46
47

Phone: 403.342.4494
Fax: 403.346.7110
by
Contour Vane Flow Straighteners are available in the traditional 1998 uniform
concentric 19-tube bundle configuration. Sized and assembled to AGA 3 / API 14.3 and ISO 5167-1 specifications, these straightening vanes are effective in aiding the removal of flow swirl and turbulence caused by upstream piping arrangements. Available in carbon steel for standard applications, and 316 stainless steel for extreme corrosive service. Exotic materials are also available by special order. Flange-style straightening vanes are installed between two raised face or RTJ flanges upstream of the orifice plate. Available for pipe sizes 2" through 30" in all standard schedules, with custom schedules by special order. Pin-style straightening vanes are line mounted with a 3/4" set pin in the wall of the upstream pipe. Available for pipe sizes 2" through 30" in all standard schedules, with custom schedules by special order. Contact one of our sales representatives today for full details, technical specifications and ordering information.
48
49

Phone: 403.342.4494
Fax: 403.346.7110
NOTES
50
51
Canalta Flow Measurement's parts offerings support these high quality product lines:
Dual Chamber Orifice Fittings Single Chamber Orifice Fittings Flow Conditioner Housings Meter runs Orifice Flange Unions
Corporate Head Office / Canada United States Argentina United Kingdom India
(+1) 403 342 4494 (+1) 940 898 0800 (+54) 9 11 3272 2377 (+44) 0 1284 715089 (+91) 4254 265050
Contact us today to find out more.
Find a list of our global distribution partners at www.canaltaflow.com/global
The "Canalta Flow Measurement", Canalta Controls and Contour names and logos are trademarks of Canalta Controls Ltd. All other trademarks are the property of their respective companies. All information presented here is for information purposes only. Though every effort has been made to ensure their accuracy, the contents of this publication shall not be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein, or their use or applicability. Due to Canaltas commitment to quality and innovation, all product designs, specifications and information material, including the contents of this publication, are subject to change without notice. Responsibility for the proper selection, maintenance and use of any product remains with the customer. SAFETY FIRST. Copyright, trademark and other forms of proprietary rights protect the contents of this publication. 2011 Canalta Controls Ltd. All rights reserved. Unauthorized reproduction in whole or in part is prohibited.

Canalta Parts Catalogue

Uploaded by

Copyright:

Available Formats

Canalta Parts Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Canalta Parts Catalogue

Uploaded by

Copyright:

Available Formats

S PART ENT OTHER M E AC H REPL IBLE WIT BRANDS T A P ING COM RY LEAD ST INDU DAY US TO T C S TA CON R DETAIL FO

Precision Machined for Accuracy, Reliability and Performance

Canalta Orifice Fitting Parts & Accessories

Phone: 403.342.4494 Email: [email protected] www.canaltaflow.com

Canalta Flow Measurement is a privately

PARTS FOR 2" - 6" SINGLE CHAMBER FITTINGS

ORIFICE PLATES & PLATE SEALS

FLOW CONDITIONING SOLUTIONS

For more information, pricing or to order, contact us at

8"+ SINGLE CHAMBER

PARTS FOR ALL DUAL CHAMBER &

For more information, pricing or to order, contact us at

8"+ SINGLE CHAMBER ORIFICE FITTINGS

HNBR 316 SS HNBR 1018 YZP CS

12 19 22A 25A 28E 56 31 55 30 55 56 55 56 31 30

25 25A-F 25S 26 26A 26B 28A-E 30 31 50 55 56 58

For more information, pricing or to order, contact us at

2" - 14" DUAL CHAMBER ORIFICE FITTINGS

Qty. 1 1 A/R 1 1 1 A/R 2 1 2 1 A/R 1 1 3 3 3 6 1 1

Qty. 1 1 3 A/R 1 3 3 3 3 2 2 A/R A/R 1 1 A/R 3 3 1

Description Grease Gun Body

Case Hardened 4140 CS

25 25A-F 25S 26 26A 28A 28E 30 31 32 33 50 52 54 55 56 58

1018 YZP CS 304 SS / 316 SS WCB / LCC / SS 316 SS CF8M SS

Teflon Coated Cast Iron 17.4PH - H1150 SS WCB / LCC / SS HNBR

316 SS 4130 CS / CF8M SS 304 SS HNBR HNBR

16 28A 25A 22A 20 25E 25C 26A 20A 26 25 5A

Cast Aluminum 316 SS

316 SS HNBR 1018 YZP HNBR

An ISO 9001:2008 Registered Company

For more information, pricing or to order, contact us at

16" DUAL CHAMBER ORIFICE FITTINGS

316 SS 4130 YZP CS Teflon Teflon 316 SS HNBR HNBR

1018 YZP CS HNBR A105N CS

28A 30 31 32 1018 YZP CS WCB / LCC / SS 316 SS CF8M SS

Bushing Retainer - Stuffing Box Drain Plugs

Plate Carrier Alignment Screw

An ISO 9001:2008 Registered Company

18" - 30" DUAL CHAMBER ORIFICE FITTINGS

For more information, pricing or to order, contact us at

1 1 1 A/R 1 1 1 A/R 2 1 2 1 A/R 1 1 6 6 2 2

1018 YZP CS HNBR

36 37C 41 41B 1018 YZP CS HNBR WCB / LCC / SS 316 SS CF8M SS

Color Etched 316 SS Grease 18/8 SS

For more information, pricing or to order, contact us at

Phone: 403.342.4494 FULL REPAIR KITS

DUAL CHAMBER / 8"+ SINGLE CHAMBER ORIFICE FITTING PARTS

CANALTA ORIFICE FITTING REPAIR KITS

Canalta Dual Chamber Orifice Fitting Repair Kit

Daniel Senior Orifice Fitting Repair Kit

YZP = Yellow Zinc Plated

For more information, pricing or to order, contact us at

DUAL CHAMBER / 8"+ SINGLE CHAMBER ORIFICE FITTING PARTS

VARIABLE BY MODEL SIZE

Shaft for 16" - 30" Model Sizes

17.4PH - H1150 Stainless Steel

Available in 4130 YZP carbon steel or CF8M cast stainless steel.

YZP = Yellow Zinc Plated

YZP = Yellow Zinc Plated

For more information, pricing or to order, contact us at