Destructive Attribute MSA (Measurement System Analysis) PDF

10/21/13
Destructive Attribute MSA (Measurement System Analysis)
The Elsmar Cove Forum (http://Elsmar.com/Forums/index.php) - Gage R&R (GR&R) and MSA (Measurement Systems Analysis) (http://Elsmar.com/Forums/forumdisplay.php?f=91) - -

(http://Elsmar.com/Forums/showthread.php?t=33004)
Robert Molenberghs
17th March 2009 06:15 AM
I would like to have some information from a collegua who has done a destructive atrributive measurement system analysis. I've used the search function, but this was not helping me. Maybe someone has done a similar study. I know the normal attributive study and a destructive study when you can measure something. But wath about a destructive atrributive measurement system. Example : operator has to to a test and afterwards he has to check the sample visual to decide it is OK or NOK. Thanks in advance. :bigwave:
Stijloor
Re: Destructive attributive MSA
Quote:
17th March 2009 06:25 AM
In Reply to Parent Post by Robert Molenberghs (Post 303245) I would like to have some information from a collegua who has done a destructive atrributive measurement system analysis. I've used the search function, but this was not helping me. Maybe someone has done a similar study. I know the normal attributive study and a destructive study when you can measure something. But wath about a destructive atrributive measurement system. Example : operator has to to a test and afterwards he has to check the sample visual to decide it is OK or NOK. Thanks in advance. :bigwave:
Robert, Have you looked at the links at the bottom of this page? Stijloor.
elsmar.com/Forums/printthread.php?t=33004 1/4
10/21/13
Marc
Re: Destructive attributive MSA
17th March 2009 06:32 AM
You might want to take a look at How to conduct destructive measurement system analysis (MSA). It's an old, rather short thread, but has some useful info. Here are some exciting discussion threads related to Destructive Testing. Don't hesitate to ask if you have more specific questions.
Robert Molenberghs
Re: Destructive Attribute MSA (Measurement System Analysis) Hi Stijloor,
17th March 2009 06:34 AM
Thanks for your reaction. Yes I did check them. But it is about a normal destruction study so you have variable data or it is about a normal attributive study where you can judge the same sample more then once. i'm looking for the combination.
Howard Atkins
Re: Destructive Attribute MSA (Measurement System Analysis)
1 Attachment(s)
17th March 2009 07:38 AM
Please find an article in the attachment
Robert Molenberghs
17th March 2009 09:33 AM
Hi All Thanks for your information. Interesting, but not exactly wath I'm looking for; I can not put a number on my measuring result is is o go - no go decission on a destructive test. ;)
rtfmpliz
18th October 2013 12:58 AM
I still have this case now, and we still find some enlightenment.we have deadline until Feb 2014. I hope i'll find it soon sorry for my bad english wahyu
Bev D
18th October 2013 05:54 AM
if you are performing a visual inspection after the destruct test and the sample doesn't change
elsmar.com/Forums/printthread.php?t=33004 2/4
10/21/13
substantially after the destruct test you can simply perform the visual MSA as you normally would. collect the appropriate number of parts, good, bad and marginal, randomly present the parts to the inspector(s) twice and perform the calculations...
rtfmpliz
Re: Destructive Attribute MSA (Measurement System Analysis) thank you Bev D, that's a good basic theory My superior already granted the permission to try this out. I hope it could satisfy our auditor :D sorry for my bad english wahyu ------------U aren't rich enough, if U unpossessed a scooter :P
20th October 2013 11:43 PM
The time now is 11:56 PM. All times are GMT -5. Your time zone can be changed in your UserCP --> Options. Contact Marc - Elsmar Cove Home Page - Elsmar Cove Archive - Privacy & DMCA/Copyright Information Top
The Demi ng PDCA Cycle Audi ti ng Informati on Identi fyi ng Waste Di scoveri ng Change 8-D Problem Solvi ng Pull Systems Process Capabi li ty - Cp vs. Cpk
QMS Implementati on Stati sti cs Lead Ti me Reducti on Hi stogram Ani mati on Fi shbone / Cause and Effects Ani mati on
FMEA Informati on Error Proofi ng (Poka Yoke) Planned Mai ntenance Process Loop Ani mati on
APQP Informati on Brai nstormi ng Qui ck Setup Taguchi Loss Functi on
FAIR USE and CORRECTNESS NOTICE: This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. We believe herein constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: http://www.law.cornell.edu/uscode/17/ If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner. In addition, I do not guarantee the correctness of the content. The risk of using content from the Elsmar Cove web site and forums remains with the user/visitor.
Responsibility Statement: Each person is responsible for anything they post in the Elsmar Cove forum. Neither I, Marc Timothy Smith, nor any of the forum Moderators, are responsible for the content of posts people make. Liability for post content resides with the poster as does interpretation and/or acceptance and/or use of advice by the reader.
Complaints : If you have a complaint with a post in a forum discussion thread, including Content in general, fighting, flaming, copyright infringement, defamation and/or 'slander', please use the 'Report This Post appears at the top of every post in every thread. button which
Site courtesy of: Marc Timothy Smith - Cayman Business Systems, 8466 Lesourdsville-West Chester Road, West Chester, Ohio 450691929 - USA (513) 341-6272
elsmar.com/Forums/printthread.php?t=33004
3/4
10/21/13

If you are having problems Registering, Activating your Registration, or other problems, you can phone me in the US. I'm not here 24/7/365, but if I'm here I'll try to help.
elsmar.com/Forums/printthread.php?t=33004
4/4

Destructive Attribute MSA (Measurement System Analysis) PDF

Uploaded by

Copyright:

Available Formats

Destructive Attribute MSA (Measurement System Analysis) PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Destructive Attribute MSA (Measurement System Analysis) PDF

Uploaded by

Copyright:

Available Formats

10/21/13

Destructive Attribute MSA (Measurement System Analysis)

Destructive Attribute MSA (Measurement System Analysis)

17th March 2009 06:15 AM

17th March 2009 06:25 AM

Destructive Attribute MSA (Measurement System Analysis)

17th March 2009 06:32 AM

17th March 2009 06:34 AM

17th March 2009 07:38 AM

Please find an article in the attachment

17th March 2009 09:33 AM

18th October 2013 12:58 AM

18th October 2013 05:54 AM

Destructive Attribute MSA (Measurement System Analysis)

20th October 2013 11:43 PM

APQP Informati on Brai nstormi ng Qui ck Setup Taguchi Loss Functi on

Destructive Attribute MSA (Measurement System Analysis)

You might also like