Scribd
Upload
631 views9 pages

17MB62

The document outlines the service menu settings and software update process for an MB62 TV. The service menu has options for video, audio, tuning, source, and diagnostic settings. It also has an option for USB operations that cannot be used directly and is for tasks like updating tools or hardware configurations. The software update process involves copying three specific files directly to a flash drive and inserting it into the powered off TV. When the TV turns on, it will update successfully if the first time installation screen appears.

Uploaded by

Justin Williams
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
631 views9 pages

17MB62

The document outlines the service menu settings and software update process for an MB62 TV. The service menu has options for video, audio, tuning, source, and diagnostic settings. It also has an option for USB operations that cannot be used directly and is for tasks like updating tools or hardware configurations. The software update process involves copying three specific files directly to a flash drive and inserting it into the powered off TV. When the TV turns on, it will update successfully if the first time installation screen appears.

Uploaded by

Justin Williams
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

21.

SERVICE MENU SETTINGS


In order to reach service menu, First Press MENU Then press the remote control code two times, which is 4725. In first screen following items can be seen:

21.1. Video Settings

21.2. Audio Settings

21.3. Options
Options-1

Options-2

21.4. Tuning Settings

21.5. Source Settings

21.6. Diagnostic

21.7. USB Operations


USB operations option can not be used directly. It can be used for updating panel tool, hw congiguration etc.

22. SOFTWARE UPDATE


In MB62 project there is only one software. From following steps software update procedure can be seen: 1. MB62_en.bin, mboot.bin and usb_auto_update_T4.txt documents should copy directly inside of a flash memory(not in a folder). 2. Put flash memory to the tv when tv is powered off. 3. Power on the and wait when the tv is opened. 4. If First Time Installition screen comes, it means software update procedure is succesful.

You might also like