Compact Planar Ultra Wideband Antenna For On-Body Applications

COMPACT PLANAR ULTRA WIDEBAND ANTENNA FOR ON-BODY APPLICATIONS
BACKGROUND OF RESEARCH
As wearable communication is developing, the demand of flexible fabric antennas is also mounting. Flexible, conformal antennas are essential to provide an unobtrusive solution. For these flexible antennas, textile materials form interesting substrates, because fabric antennas can be easily integrated into a piece of clothing. These textile antennas can be constructed using ordinary fabric as dielectric and e.g. conductive tape or fabric as conducting elements [1, 2]. Recently, there has been growing interest in the antenna community to merge between wearable systems technology, Ultra-Wideband (UWB) technology and textile technology. All these together have resulted in demand for flexible fabric antennas, which can be easily attached to a piece of clothing [3]. UWB offers good penetrating properties that could be applied to imaging in medical applications; with the UWB body sensors, this application could be easily reconfigured to adapt to the specific tasks and would enable high data rate connectivity to external processing networks [4]. It is interesting to note that small ultra wideband (UWB) antennas are also demanded for some medical applications recently. One of the medical applications which require the UWB antennas is the microwave imaging of breast cancer. This imaging modality transmits lower power short microwave pulses (tens picoseconds to nanoseconds) into the body and detects the differentiated scattering due to the dielectric contrast between malignant and health tissues. A UWB compact antenna array is employed to conduct a 3D scanning through a so called digital beam forming in space-time domain [5]. In order to achieve high detection resolutions and good clutter rejection, the antennas with an impedance bandwidth 4-10GHz are usually employed as the elements in a condensed antenna array. So, small and low profile directional UWB antennas are desirable for this application. In addition, the antenna needs to have good radiation
characteristics, i.e. consistent patterns over the entire operating bandwidth and good time-domain characteristics minimal pulse distortion [6]. A wearable antenna is attractive for military purposes because it is invisible, allowing the radio operator to hide from the enemy. A radio system with a built-in antenna does not require time to deploy the antenna and does not inhibit mobility. In addition, there is less possibility of damage from the obstacles in an urban environment situation, compared with the conventional antennas used in the military devices [7, 8]. Like other small antennas for wireless communications, low profile and reasonable efficiency are usually specified for the wearable antenna. In addition, for user comport and to make the clothing flexible, the antenna shape needs to follow the user's body curvature. Operational reliability is especially important for military applications and antennas must perform even when covered by ice, soil or mud. Ultra-wideband communication technologies have the potential to provide a variety of applications, such as radar imaging (below 960 MHz or 3.1-10.6 GHz), surveillance (1.99-10.6 GHz), and high-speed data transmission systems (3.1-10.6 GHz) including RFID and sensor networks [7, 8, 9]. Therefore, it still remains as an engineering challenge to design suitable UWB antennas for these applications.
OBJECTIVES
Main objectives of the proposed work include:
To determine the feasibility of designing ultra wideband antenna from textile substrate. To investigate the enhancement of the bandwidth over other types of cloth materials. To utilize textile materials for the development of flexible wearable systems, which has been rapidly demanded in wireless devices.
SCOPE OF STUDY
This study will focus on the performance improvement in terms of bandwidth for the ultra wideband antenna designed using jeans as a substrate.
RESEARCH METHODODLOGY
The work will be divided into two phases: Phase I This phase will be focusing on the previous works which study the performance of wearable antennas using different fabric materials as substrates. Phase II This second phase will focus on simulation and fabrication of the proposed design.
Data Analysis
Different available methods will be used to analyze the data collected and available commercial software will be employed to simulate and design the proposed model.
Expected results of the study
It is expected that this research will produce results that will help in: 1. Investigating different techniques for the design of the antenna in order to achieve optimum performance desired in specific applications. 2. Providing a clear insight of the feasibility of utilizing textile materials in making antennas substrate. 3. Measuring the level of bandwidth enhancement of ultra wideband antenna with jeans substrate properties.
References
[1] Nevin Altunyurt, Madhavan Swaminathan, Venkatesh Sundaram, George White, Conformal Antennas on Liquid Crystalline Polymer Substrates for Consumer Applications, Proceedings of Asia-Pacific Microwave Conference, Dec. 2007. [2] Mai A. R. Osman M. K. A. Rahim, M. Azfar. A., K. Kamardin, F. Zubir, and N. A.Samsuri, Design and Analysis UWB Wearable Textile Antenna Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP),2005. [3] Mai A. R. Osman, M. K. A. Rahim, M. Azfar, N. A. Samsuri, F. Zubir, and K. Kamardin, Design, Implementation and Performance Of Ultra-Wideband Textile Antenna Progress In Electromagnetics Research B, Vol. 27, 307-325, 2011 [4] A. Alomainy, Y. Hao, X. Hu, C.G. Parini and P.S. Hall, UWB On-Body Radio Propagation And System Modeling for Wireless Body-Centric Networks, IEE Proc.-Commun., Vol. 153, No. 1, February 2006, pp. 107-114 [5] X. Li, et al, C. Hagness, An overview of ultra-wideband microwave imaging via space-time beamforming for early-stage breast-cancer detection, IEEE AP-S Magazine, vol. 47, no. 1, 2005.
[6] X. Chen, J. Liang, S. Wang, Z. Wang and C. Parini, Small Ultra Wideband Antennas For Medical Imaging, Loughborough Antennas & Propagation Conference, 17-18 March 2008, Loughborough, UK. [7] J. E. Lebaric, "A Ultra-Wideband Conformal Helmet Antenna," Microwave Conference 2000 Asia-Pacific, vol. 1, pp. 1477 - 1481, Dec. 2000. [8] J. E. Lebaric, "Ultra-Wideband, Zero Visual Signature RF Vest Antenna for Man-Portable Radios,"MILCOM2001, vol. 2, pp. 1291 - 1294, Oct. 2001. [9] E. C. Kohls, "A Multi-Band Body-worn Antenna Vest," IEEE APS 2004, vol. 1, pp. 447-450, June 2004.

Compact Planar Ultra Wideband Antenna For On-Body Applications

Uploaded by

Copyright:

Available Formats

Compact Planar Ultra Wideband Antenna For On-Body Applications

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Compact Planar Ultra Wideband Antenna For On-Body Applications

Uploaded by

Copyright:

Available Formats

COMPACT PLANAR ULTRA WIDEBAND ANTENNA FOR ON-BODY APPLICATIONS

Main objectives of the proposed work include:

Expected results of the study

You might also like