Operation of IP Data Networks: o o o o

Operation of IP Data Networks
Operation of IP Data Networks Recognize the purpose and functions of various network devices such as Routers, Switches, Bridges and Hubs. Select the components required to meet a given network specification. Identify common applications and their impact on the network Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models. Predict the data flow between two hosts across a network. Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN
LAN Switching Technologies

Determine the technology and media access control method for Ethernet networks Identify basic switching concepts and the operation of Cisco switches.
o o o o
Collision Domains Broadcast Domains Types of switching CAM Table
Configure and verify initial switch configuration including remote access management.
Cisco IOS commands to perform basic switch setup
Verify network status and switch operation using basic utilities such as ping, telnet and ssh. Identify enhanced switching technologies
o o o
RSTP PVSTP Ethercnannels
Describe how VLANs create logically separate networks and the need for routing between them.
Explain network segmentation and basic traffic management concepts
Configure and verify VLANs Configure and verify trunking on Cisco switches
o o
DTP Auto negotiation
Configure and verify PVSTP operation
o o
describe root bridge election spanning tree mode
IP addressing (IPv4 / IPv6)

Describe the operation and necessity of using private and public IP addresses for IPv4 addressing Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment.
Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment.
Describe the technological requirements for running IPv6 in conjunction with IPv4 such as dual stack Describe IPv6 addresses
o o o o o o
Global unicast Multicast Link local Unique local eui 64 autoconfiguration
IP Routing Technologies
Describe basic routing concepts
o o o
CEF Packet forwarding Router lookup process
Describe the boot process of Cisco IOS routers
o o
POST Router bootup process
Configure and verify utilizing the CLI to set basic Router configuration
Cisco IOS commands to perform basic router setup
Configure and verify operation status of a device interface, both serial and ethernet Verify router configuration and network connectivity
Cisco IOS commands to review basic router information and network connectivity
Configure and verify routing configuration for a static or default route given specific routing requirements Manage Cisco IOS Files
o o o
Boot preferences Cisco IOS image(s) Licensing
o o
Show license Change license
Differentiate methods of routing and routing protocols
o o o o o o o o
Static vs. Dynamic Link state vs. Distance Vector Administrative distance split horizon metric next hop ip routing table Passive Interfaces
Configure and verify OSPF (single area)
o o o o o o o o o
Benefit of single area neighbor adjacencies OSPF states Discuss Multi area Configure OSPF v2 Configure OSPF v3 Router ID Passive interface LSA types
Configure and verify EIGRP (single AS)
o o o o o o o
Feasible Distance / Feasible Successors /Administrative distance Feasibility condition Metric composition Router ID Auto summary Path selection Load balancing
o o o
Equal Unequal
Passive interface
Configure and verify interVLAN routing (Router on a stick)
o o o
sub interfaces upstream routing encapsulation
Configure SVI interfaces
IP Services
Configure and verify DHCP (IOS Router)
o o o o
configuring router interfaces to use DHCP DHCP options excluded addresses lease time
Describe the types, features, and applications of ACLs
Standard
o o o o o o
Sequence numbers Editing
Extended Named Numbered Log option
Configure and verify ACLs in a network environment
o o o
Named Numbered Log option
Identify the basic operation of NAT
o o o o o o o
Purpose Pool Static 1 to 1 Overloading Source addressing One way NAT
Configure and verify NAT for given network requirements
Configure and verify NTP as a client Recognize High availability (FHRP)
o o o
VRRP HSRP GLBP
Configure and verify Syslog
Utilize Syslog Output
Describe SNMP v2 & v3
Network Device Security
Configure and verify network device security features such as
o o o o o o o o o
Device password security Enable secret vs enable Transport Disable telnet SSH VTYs Physical security Service password Describe external authentication methods
Configure and verify Switch Port Security features such as
o o o o
Sticky MAC MAC address limitation Static / dynamic Violation modes
o o o o o o o
Err disable Shutdown
Protect restrict Shutdown unused ports Err disable recovery Assign unused ports to an unused VLAN Setting native VLAN to other than VLAN 1
Configure and verify ACLs to filter network traffic
Configure and verify an ACLs to limit telnet and SSH access to the router
Troubleshooting

Identify and correct common network problems Utilize netflow data Troubleshoot and correct common problems associated with IP addressing and host configurations. Troubleshootand Resolve VLAN problems
o o o
identify that VLANs are configured port membership correct IP address configured
Troubleshoot and Resolve trunking problems on Cisco switches
o o o
correct trunk states correct encapsulation configured correct vlans allowed
Troubleshoot and Resolve Spanning Tree operation issues
o o o o
root switch priority mode is correct port states
Troubleshoot and Resolve routing issues
o o o
routing is enabled routing table is correct correct path selection
Troubleshoot and Resolve OSPF problems
o o o o o o o
neighbor adjancies Hello and Dead timers OSPF area Interface MTU Network types Neighbor states OSPF topology database
Troubleshoot and Resolve EIGRP problems
neighbor adjancies
o o o
AS number Load balancing Split horizon
Troubleshoot and Resolve interVLAN routing problems
o o o o o
Connectivity Encapsulation Subnet Native VLAN Port mode trunk status
Troubleshoot and Resolve ACL issues
o o o
Statistics Permitted networks Direction
Interface
Troubleshoot and Resolve WAN implementation issues
o o o
Serial interfaces PPP Frame relay
Troubleshoot and Resolve Layer 1 problems
o o o o o o o
Framing CRC Runts Giants Dropped packets Late collision Input / Output errors
Monitor NetFlow statistics Troubleshoot etherchannel problems
WAN Technologies
Identify different WAN Technologies
o o
Metro Ethernet VSAT
o o o o o o o o
Cellular 3G / 4G MPLS T1 / E1 ISDN DSL Frame relay Cable VPN
Configure and verify a basic WAN serial connection Configure and verify a PPP connection between Cisco routers Configure and verify Frame Relay on Cisco routers Implement and troubleshoot PPPoE

Operation of IP Data Networks: o o o o

Uploaded by

Copyright:

Available Formats

Operation of IP Data Networks: o o o o

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Operation of IP Data Networks: o o o o

Uploaded by

Copyright:

Available Formats

Operation of IP Data Networks

LAN Switching Technologies

Collision Domains Broadcast Domains Types of switching CAM Table

Cisco IOS commands to perform basic switch setup

RSTP PVSTP Ethercnannels

Explain network segmentation and basic traffic management concepts

DTP Auto negotiation

Configure and verify PVSTP operation

describe root bridge election spanning tree mode

IP addressing (IPv4 / IPv6)

Global unicast Multicast Link local Unique local eui 64 autoconfiguration

Describe basic routing concepts

CEF Packet forwarding Router lookup process

Describe the boot process of Cisco IOS routers

POST Router bootup process

Cisco IOS commands to perform basic router setup

Boot preferences Cisco IOS image(s) Licensing

Show license Change license

Differentiate methods of routing and routing protocols

Configure and verify OSPF (single area)

Configure and verify EIGRP (single AS)

Configure and verify interVLAN routing (Router on a stick)

sub interfaces upstream routing encapsulation

Configure SVI interfaces

Configure and verify DHCP (IOS Router)

Describe the types, features, and applications of ACLs

Sequence numbers Editing

Extended Named Numbered Log option

Configure and verify ACLs in a network environment

Named Numbered Log option

Identify the basic operation of NAT

Purpose Pool Static 1 to 1 Overloading Source addressing One way NAT

Configure and verify NAT for given network requirements

Configure and verify NTP as a client Recognize High availability (FHRP)

VRRP HSRP GLBP

Configure and verify Syslog

Utilize Syslog Output

Describe SNMP v2 & v3

Network Device Security

Configure and verify network device security features such as

Configure and verify Switch Port Security features such as

Sticky MAC MAC address limitation Static / dynamic Violation modes

Err disable Shutdown

Configure and verify ACLs to filter network traffic

Troubleshoot and Resolve trunking problems on Cisco switches

correct trunk states correct encapsulation configured correct vlans allowed

Troubleshoot and Resolve Spanning Tree operation issues

root switch priority mode is correct port states

Troubleshoot and Resolve routing issues

routing is enabled routing table is correct correct path selection

Troubleshoot and Resolve OSPF problems

Troubleshoot and Resolve EIGRP problems

AS number Load balancing Split horizon

Troubleshoot and Resolve interVLAN routing problems

Connectivity Encapsulation Subnet Native VLAN Port mode trunk status

Troubleshoot and Resolve ACL issues

Statistics Permitted networks Direction

Troubleshoot and Resolve WAN implementation issues

Serial interfaces PPP Frame relay