***************************************************************************

**************** D720200 & D720200A Design Resources Release **************

***** All of the Software are under NDA or Software license agreement *****
***************************************************************************
Release Note
December.17.2010
Renesas Electronics uPD720200 & uPD720200A
USB 3.0 Host Controller Driver Kit (x86 and x64)
for Windows XP, VISTA, 7 and Server 2008 Release 2
Kit Version : 2.0.32.0 : November 17th, 2010
Copyright (C) Renesas Electronics Corporation 2010 All Rights Reserved
***************************************************************************
NOTE1:
This installer package is generated with the InstallShield2010 SP1.
If the previous driver package(v0.X.X.X , v1.0.1.0 or v1.0.7.0) is installed,
Please uninstall the previous driver package and install new package.
--------------------------------------------------------------------------Table of Contents
--------------------------------------------------------------------------1. Release Files
2. Command Line Options
3. History
----------------------------------------------------------------------------------------------------------------------------------------------------1. Release Files
----------------------------------------------------------------------------------------------------------------------------------------------------Date
Time
Size File Name
Version
--EXE(Installer Package)
2010/12/15 10:08
9062KB RENESAS-USB3-Host-Driver-20320-setup.exe
2.0.
32.0
2010/04/27 13:49
1KB setup.iss
2010/12/15 10:19
924KB InstallShield 2010 SP1 Projects-101217.zip
--ZIP
2010/12/15 10:21
ary.zip 2.0.32.0
---contents
2009/09/11 9:10
2009/09/11 14:50
2009/05/20 16:30
2009/03/18 15:05
2009/05/20 17:27
2009/03/16 14:23
2009/03/18 15:07
2009/05/20 16:46
2009/05/20 16:46
2009/03/18 15:15
2009/05/20 16:58
2009/05/20 16:55
2009/05/21 17:44
2009/05/20 17:03
2009/05/20 17:03
2009/05/20 17:22
2009/03/18 15:26
2009/05/21 15:53
2009/05/20 17:06

6961KB
21KB
21KB
24KB
22KB
25KB
18KB
22KB
22KB
22KB
22KB
22KB
19KB
11KB
22KB
23KB
25KB
26KB
21KB
24KB

RENESAS-USB3-Host-Driver-20320-Setup-x86-x64-Bin
0x0C04.ini
0x2C0a.ini
0x040a.ini
0x040b.ini
0x040c.ini
0x040d.ini
0x040e.ini
0x041b.ini
0x041d.ini
0x041e.ini
0x041f.ini
0x0401.ini
0x0404.ini
0x0405.ini
0x0406.ini
0x0407.ini
0x0408.ini
0x0409.ini
0x0410.ini

2009/06/08
2009/03/16
2009/05/20
2009/05/20
2009/05/20
2009/05/20
2009/05/20
2009/05/20
2009/05/21
2009/05/20
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/12/15
2010/04/27
----Files
2010/11/17
2010/11/17
2010/11/17
2010/12/13
-----0C0A
2010/11/12
2010/11/16
-----0C04
2010/11/12
2010/11/16
-----2C0A
2010/11/12
2010/11/16
-----040A

16:45
14:28
17:07
17:08
17:09
17:09
17:12
17:13
17:44
17:14
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:02
10:01
10:02
10:07
10:02
13:49

15KB
14KB
24KB
23KB
23KB
23KB
22KB
23KB
11KB
24KB
92KB
82KB
101KB
101KB
111KB
111KB
37KB
109KB
101KB
109KB
59KB
106KB
110KB
105KB
98KB
106KB
98KB
104KB
103KB
100KB
102KB
98KB
97KB
99KB
102KB
81KB
104KB
37KB
37KB
4857KB
776KB
972KB
3KB
1KB

0x0411.ini
0x0412.ini
0x0413.ini
0x0414.ini
0x0415.ini
0x0416.ini
0x0419.ini
0x0424.ini
0x0804.ini
0x0816.ini
1025.mst
1028.mst
1029.mst
1030.mst
1031.mst
1032.mst
1033.mst
1034.mst
1035.mst
1036.mst
1037.mst
1038.mst
1040.mst
1041.mst
1042.mst
1043.mst
1044.mst
1045.mst
1046.mst
1049.mst
1051.mst
1053.mst
1054.mst
1055.mst
1060.mst
2052.mst
2070.mst
3076.mst
11274.mst
ISSetup.dll
nusb3drv.msi
setup.exe
Setup.ini
setup.iss

09:52
09:53
09:51
13:14

95KB
111KB
307KB
48KB

nusb3mon.dll
nusb3mon.exe
nusb3utl.exe
nusb3ver.dll

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

2KB
2KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

2.0.28.0
2.0.28.0
2.0.28.0
2.0.32.0

2010/11/12
2010/11/16
-----040B
2010/11/12
2010/11/16
-----040C
2010/11/12
2010/11/16
-----040D
2010/11/12
2010/11/16
-----040E
2010/11/12
2010/11/16
-----041B
2010/11/12
2010/11/16
-----041D
2010/11/12
2010/11/16
-----041E
2010/11/12
2010/11/16
-----041F
2010/11/12
2010/11/16
-----0401
2010/11/12
2010/11/16
-----0404
2010/11/12
2010/11/16
-----0405
2010/11/12
2010/11/16
-----0406
2010/11/12
2010/11/16
-----0407
2010/11/12
2010/11/16
-----0408
2010/11/12
2010/11/16
-----0409
2010/11/12
2010/09/30
-----0410
2010/11/12
2010/11/16
-----0411
2010/11/12
2010/11/16
-----0412
2010/11/12
2010/11/16
-----0413
2010/11/12
2010/11/16
-----0414

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

3KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

3KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

3KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

3KB
2KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

3KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:56

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

3KB
2KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

3KB
2KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

2010/11/12
2010/11/16
-----0415
2010/11/12
2010/11/16
-----0416
2010/04/14
2010/11/16
-----0419
2010/11/12
2010/11/16
-----0424
2010/11/12
2010/11/16
-----0804
2010/11/12
2010/11/16
-----0816
2010/11/12
2010/11/16
-----x64
2010/12/14
2010/12/10
2010/12/10
2010/12/14
2010/12/10
2010/12/10
-----x86
2010/12/14
2010/12/10
2010/12/10
2010/12/14
2010/12/10
2010/12/10

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

09:31
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

3KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

3KB
2KB

nusb3mon.exe.mui
nusb3utl.exe.mui

20:20
12:13

4KB
3KB

nusb3mon.exe.mui
nusb3utl.exe.mui

15:30
13:54
13:50
15:30
13:54
13:50

9KB
3KB
79KB
9KB
2KB
177KB

nusb3hub.cat
nusb3hub.inf
nusb3hub.sys
nusb3xhc.cat
nusb3xhc.inf
nusb3xhc.sys

2.0.32.0

15:30
13:54
13:50
15:30
13:54
13:50

8KB
3KB
61KB
8KB
2KB
139KB

nusb3hub.cat
nusb3hub.inf
nusb3hub.sys
nusb3xhc.cat
nusb3xhc.inf
nusb3xhc.sys

2.0.32.0

2.0.32.0

2.0.32.0

----------------------------------------------------------------------------------------------------------------------------------------------------2. Command Line Options

----------------------------------------------------------------------------------------------------------------------------------------------------1)Silent install
Ex.) setup.exe /s
-To install this driver package silently, "setup.iss" file is needed.
This package includes the "setup.iss" in which the following folder
path is set.
"C:\Program Files\Renesas Electronics\USB 3.0 Host Controller Driver".
If you want to change install path, you need to generate setup.iss as
follows: setup /r /f1".\setup.iss"
2)Check existence of USB3.0 Host Controller
Ex.) setup.exe /v"CHECK_HW_EXIST=1"
-When this command line option is set, the installer checks existence of
the USB3.0 Host Controller(uPD720200/uPD720200A). If the uPD720200/uPD720200A
is not in the PC, this installer does not install the device drivers.

##Caution##
To install the device drivers with this command line option after
uninstalling the device drivers, it is necessary to restart the PC.
3) Not install the USB3.0 Monitor application (nusb3mon.exe/dll)
/v"NO_MONITOR=1"
-When this command line option is set, the USB3.0 Monitor Application
(nusb3mon.exe/dll) is not installed.
##Caution##
If the USB3.0 Monitor Application is already installed, it is necessary to
uninstall the USB3 driver package of previous version before installing the
new USB3 driver package (v1.0.19.0 or later).
4) Not install the USB3.0 Utility application (nusb3utl.exe)
/v"NO_UTILITY=1"
-When this command line option is set, the USB3.0 Utility Application
(nusb3utl.exe) is not installed.
##Caution##
If the USB3.0 Utility Application is already installed, it is necessary to
uninstall the USB3 driver package of previous version before installing the
new USB3 driver package (v2.0.4.0 or later).
5) Disable the Selective Suspend function
Ex.) setup.exe /v"SET_SELSUS_MODE1=1"
-Selective Suspend function is enabled by default starting with Ver2.0.20.0.
This option disables the Selective Suspend function. The Selective Suspend
function is described in section 1.4 & 2.8 of "USB 3.0 Host Controller Driver
Application Note (ISG-NC1-200030)". Please see that document for more detail.
##Note##
This option is supported from Ver.2.0.20.0.
The Selective Suspend function for External Hubs is supported from Ver.2.0.20.
0.
6) Hide the pop-up message
Ex.) setup.exe /v"CHECK_HW_EXIST=1 NO_MESSAGE=1"
-This option suppresses the pop-up message when it is used with the "CHECK_HW_E
XIST"
option. If you want to hide the pop-up message on the "CHECK_HW_EXIST" option,
you should use this option on the command line.
-This option is described in section 2.5 & 2.9 of "USB 3.0 Host Controller Driv
er
Application Note(ISG-NC1-200030)". Please see that document for more detail.
##Note##

This option is supported from Ver.2.0.20.0.

This option must be used only with the "CHECK_HW_EXIST" option. If this option
is used
by itself, it has no effect.
7) Disable the Dynamic U1/U2 state control function
Ex.) setup.exe /v"U1U2_DISABLE=1"
-The Dynamic U1/U2 state control function is enabled by default starting with
Ver2.0.4.0. If you want to disable the Dynamic U1/U2 state control function,
you should use this option on the command prompt.
##Note##
This option is supported from Ver.2.0.26.0.
8) Disable the check box to disable the Dynamic U1/U2 state control function
on "nusb3utl.exe"
Ex.) setup.exe /v"U1U2_UTL_DISABLE=1"
-From ver2.0.26.0, the USB 3.0 Host controller Utility supported the check-box
to disable the Dynamic U1/U2 state control function. This check-box is appeare
d
in default setting.
If you don't want to display this checkbox on USB3.0 Host controller Utility,
you should use this option on the command prompt.
##Note##
This option is supported from Ver.2.0.26.0.
----------------------------------------------------------------------------------------------------------------------------------------------------3. History
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Version 2.0.32.0 : December 17th, 2010
--------------------------------------------------------------------------- Windows Logo Information
Submission ID: 1435933
Product Name: Renesas Electronics USB3.0 Host Controller
Category: Device
Subcategory: Bus Controllers and Ports > USB Controller
Unclassiified
Qualification Level: Logo - Designed for Microsoft Windows XP family, x86 - D
FW
Logo - Designed for Microsoft Windows XP family, x64 - D
FW
Logo - Microsoft Windows Vista family, x86 Basic - Basic
Logo - Microsoft Windows Vista family, x64 Basic - Basic
Logo - Device - Compatible with Windows 7
Logo - Device - Compatible with Windows 7 x64
Logo - Certified for Microsoft Windows Server 2008 Relea
se 2 family, x64
- The following issues depending on the specific device were fixed.

1. D-Link DWA160(USB-WLAN Module) can not find access points.

2. USB 2.0 Gigabit Ethernet Adapter(WS-NWU220G) does not work after S3/S4-Re
sume.
3. After ISDN-USB device(AVM FRITZ! Card USB V2.1) is disconnected during th
e S3 state,
the PC can not resume from the S3 state.
- The following issues were fixed.
1. When a USB3.0 ExpressCard is reconnected while the USB3.0 Host Controller
Utility
(nusb3utl.exe) is opened, it shows the error message( USB3.0 Host Control
ler not found!).
2. After S3/S4-resume, the USB 3.0 Host Controller driver can not detect the
USB 2.0 device
into which a Low Speed device is changed during the S3/S4 state.
#Note# This issue occurs only when the Remote WakeUp function function is
enabled in
the function driver.
--------------------------------------------------------------------------Version 2.0.30.0 : November 30th, 2010
--------------------------------------------------------------------------- Windows Logo Information
Submission ID: 1433396
Product Name: Renesas Electronics USB3.0 Host Controller
Category: Device
Subcategory: Bus Controllers and Ports > USB Controller
Unclassiified
Qualification Level: Logo - Designed for Microsoft Windows XP family, x86 - D
FW
Logo - Designed for Microsoft Windows XP family, x64 - D
FW
Logo - Microsoft Windows Vista family, x86 Basic - Basic
Logo - Microsoft Windows Vista family, x64 Basic - Basic
Logo - Device - Compatible with Windows 7
Logo - Device - Compatible with Windows 7 x64
Logo - Certified for Microsoft Windows Server 2008 Relea
se 2 family, x64
- Tuned the host driver to improve performance.
- Added the process to clear USBLEGCTLSTS register after the host driver obtaine
d
Ownership. This process prevents BIOS and OS PCI driver from violating accessi
ng
the Ownership when the host driver hands off it.
- The USB3.0-SATA Bridge LSI used by "Goodway NU6120", "Fujitsu HLMD001C" and
"Mach Xtreme MXUB3MFX" freeze when they received the Hot-Reset from the host.
From V2.0.30.0, we added recovery processes.
- The following issues were fixed.
1. There is a possibility that the bluescreen occurs when S3/S4 & resume
is running.

2. When Users are using the USB 3.0 Host Controller Utility(nusb3utl.exe) an
d
pushed [F1]key of the keyboard, the blank pop-up is shown.
3. When Users are using USB 3.0 Host Controller Utility(nusb3utl.exe) and
pushed [F4]key ,[BackSpace]key or [Enter]key of the keyboard,
the error message is shown.
--------------------------------------------------------------------------Version 2.0.26.0 : October 7th, 2010
--------------------------------------------------------------------------- Windows Logo Information
Submission ID: 1426595
Product Name: Renesas Electronics USB3.0 Host Controller
Category: Device
Subcategory: Bus Controllers and Ports > USB Controller
Qualification Level: Logo - Designed for Microsoft Windows XP family, x86 - D
FW
Logo - Designed for Microsoft Wi
ndows XP family, x64 - DFW
Logo - Microsoft Windows Vista f
amily, x86 Basic - Basic
Logo - Microsoft Windows Vista f
amily, x64 Basic - Basic
Logo - Device - Compatible with
Windows 7
Logo - Device - Compatible with
Windows 7 x64
Logo - Certified for Microsoft W
indows Server 2008 Release 2 family, x64
- Added the new function in "nusb3utl.exe" which can disable/enable
"Dynamic U1/U2 state control function".
- The following issues were fixed.
1. Bluescreen occurred when 3G modem card (TD-SCDMA RX-310) is connected
to the PC through
USB3 Host Controller.
2. Yellow bang issues occurred when the following USB devices are connec
ted
to the PC through USB3 Host Controller.
a)Pinnacle Systems PCTV MCE IR Transceiver (Receiver)
b)Philips OVU4003/00 (Remote Receiver)
c)Philips RC1534501/00 (Remote controller)
--------------------------------------------------------------------------Version 2.0.20.0 : August 13th, 2010
--------------------------------------------------------------------------- Windows Logo Information
Submission ID: 1417969
Product Name: Renesas Electronics USB3.0 Host Controller
Category: Device
Subcategory: Bus Controllers and Ports > USB Controller
Qualification Level: Logo - Designed for Microsoft Windows XP family, x86 - D
FW
Logo - Designed for Microsoft Wi
ndows XP family, x64 - DFW
Logo - Microsoft Windows Vista f
amily, x86 Basic - Basic

Logo - Microsoft Windows Vista f

amily, x64 Basic - Basic
Logo - Device - Compatible with
Windows 7
Logo - Device - Compatible with
Windows 7 x64
Logo - Certified for Microsoft W
indows Server 2008 Release 2 family, x64
- Supported the Windows Server 2008 Release 2 (x64)
- Supported the Selective Suspend function for an External Hub.
Please see section 1.4 & 2.8 of "USB 3.0 Host Controller Driver Application
Note" for more detail.
- The following issues were fixed.
1. On "Devices and Printers" of Windows 7, Bus reported device descripti
on
of device's Property was not shown when USB devices were connected to the
computer through USB 3.0 Host Controller.
2. USB3 Driver didn't support the Dynamic U1/U2 state control function f
or
USB3 Devices which support the Periodic Endpoint.
3. There was an issue with the Control transfer. This issue occurred in
the
following cases.
Case1. Yellow bang issues occurred when USB devices is connected
to the PC through USB3 Host Controller.
Case2. USB3 Host Controller cannot receive the Vendor Requests.
##Caution##
This issue occurs in Ver2.0.4.0 only. This does not occur with
Ver1.0.20.0 or earlier.
4. After suspend & resume with Microsoft's Zune HD connected through the
USB 3.0 Host Controller, Device manager showed the yellow bang for this
device.
- Hardware Ids of device's Property were designed as mixed-case on all Windows O
S.
From Ver2.0.20.0, Hardware Ids of device's Property are designed as follows.
Windows XP
: Vid_XXXX (Designated by mixed-case)
Windows 7/Vista : VID_XXXX (Designated by capital letters only)
--------------------------------------------------------------------------Version 2.0.4.0 : May 14th, 2010
--------------------------------------------------------------------------- Windows Logo Information
Submission ID: 1403710
- Dynamic U1/U2 state control function was enabled.
- Driver Provider Name in the INF file was changed from NEC Electronics
to Renesas Electronics.
- "Discontine storage access" issue was fixed.

(Although we fixed "Discontinue storage access" issue in V1.0.19.0,

we found some cases where this issue was reproduced.)
--------------------------------------------------------------------------Version 1.0.20.0 : March 31th, 2010
--------------------------------------------------------------------------- Windows Logo Information
Submission ID: 1397746
##Note##
The Drivers in this package are certified with WLK1.5.
From the WLK1.5, categories for which USB3.0 xHCI drivers should be submitted
were changed as follows.
Submission Categories
USB3 Host Controller : Device - USB Controller
USB3 Root Hub
: Unclassified
With this change, the INF file for driver installation is separated into
two files. The nusb3xhc.inf is for the USB3 Host Controller, and the
usb3hub.inf is for the USB3 Root hub.
- The following bugs were fixed
1. UQ WiMAX USB module (UD01SS) is not detected correctly.
2. There is a possibility that bluescreen occurs when attempting hot plug
operations at the downstream port of the USB2.0 HUB connected with
the USB3.0 port.
--------------------------------------------------------------------------Version 1.0.19.0 : Februay 5th, 2010
--------------------------------------------------------------------------- Windows Logo Information
Submission ID: 1387363
- The following functions were added.
1. One of the notifications that we reported in the IBB-ND0-100001
(Notification and product restriction information, Dec 14th 2009),
"Discontinue storage access after sleep(S3) and hibernation(S4) in
PC system", is fixed.
2. When disabling a SS Device with safely remove, the USB port connected
with the SS device is placed in U3 instead of U0.
- Added command line option to this installer.
/v"NO_MONITOR=1"
- When this command line option is set, the USB3.0 Monitor Application
(nusb3mon.exe/dll) is not installed.
##Caution##
If the USB3.0 Monitor Application is already installed, it is necessary to
uninstall the USB3 driver package of previous version before installing the
new USB3 driver package(v1.0.19.0 or later).
--------------------------------------------------------------------------Version 1.0.18.0 : December 1st, 2009
--------------------------------------------------------------------------We received Device Logo in the USB Controller Subcategory of the WLK1.4.

As for system logo test,

Microsoft announced testing process for USB3.0 xHCI Controller below.
http://www.microsoft.com/whdc/whql/resources/news/whqlnews_112409.htm
- Windows Logo Information
Submission ID: 1377656
Product Name: NEC Electronics USB3 Host-01
Category: Device
Subcategory: Bus Controllers and Ports > USB Controller
Qualification Level: Signature Only - Microsoft Windows XP family, x86 - Uncla
ssified
Signature Only - Microsoft Windows XP family, x64 - Uncla
ssified
Logo - Microsoft Windows Vista family, x86 Basic - Basic
Logo - Microsoft Windows Vista family, x64 Basic - Basic
Logo - Device - Compatible with Windows 7
Logo - Device - Compatible with Windows 7 x64
- The following bugs were fixed.
1. When host driver is disabled and uPD720200 goes to D3hot state,
CLKREQ# does not work.
2. When connectiong a certain Keyboard with fingerprint function,
PC can't enter S3/S4/S5 state.
3. When using a certain ZIP Drive, file transfer is aborted.
--------------------------------------------------------------------------Version 1.0.17.0 : Nobember 2nd, 2009
--------------------------------------------------------------------------- This version includes the CAT files signed by
Microsoft Windows Hardware Compatibility Publisher.
This device driver complies with WHQL certification as Unclassified
Category on Windows XP, Vista & 7.
The Submission ID for WHQL certification is 1371310.
- The following bug was fixed.
1. Function drivers were not unloaded when disconnectiong gold tree from
the roothub port of USB3 HC.
2. After Warm Reset was issued, enumeration process might fail.
- InstallShield project file, License.rtf and versionDLL were updated.
- The following functions were added.
1. When Link Errors frequently occur in the SuperSpeed-Port, driver changes
the connection from the SuperSpeed to HighSpeed.
2. Transfer throughput was improved.
3. Dynamic U1/U2 state control function was disabled. When enabling U1/U2
function, the device that used SuperSpeed link with host went down unexpec
tedly.
We decided to disable this function to get interoperability.
To get better interoperability, please use the FW version 3.0.2.1
released Nov.2nd 2009 or later.
---------------------------------------------------------------------------

Version 1.0.14.0 : October 6th, 2009

--------------------------------------------------------------------------- This version includes the CAT files signed by
Microsoft Windows Hardware Compatibility Publisher.
This device driver complies with WHQL certification as Unclassified
Category on Windows XP, Vista & 7.
The Submission ID of WHQL certification is 1358042.
- The following bugs are fixed.
1. If the USB Device has multiple Endpoints with same EndpointAddress,
the USB Device is not enumerated.
2. A USB2.0 Device connected with mulitiple layered USB2.0 HUB is not detecte
d
after resuming Sleep and Hibernate.
- Updated InstallShield project file, script file, customDLL & versionDLL.
- Added the following functions to this installer.
1. Command line option for checking existence of USB3.0 Host Controller.
/v"CHECK_HW_EXIST=1"
When this command line option is set, the installer checks existence of
the USB3.0 Host Controller(uPD720200). If the uPD720200 is not in the PC,
this installer does not install the device drivers.
##Caution##
To install the device drivers with this command line option after uninstall
ing
the device drivers, it is necessary to restart on the PC.
2. Previously, this installer did not install device drivers to the PC
in which device drivers with same version are already installed.
In this version, it reinstalls the device drivers to the PC.
--------------------------------------------------------------------------Version 1.0.12.0 : September 11th, 2009
--------------------------------------------------------------------------- Updated End User Licence Agreement.
- This version includes the CAT files signed by
Microsoft Windows Hardware Compatibility Publisher.
This device driver complies with WHQL certification as Unclassified
Category on Windows XP, Vista & 7.
The Submission ID of WHQL certification is 1349589.
- This package includes "Install Shield 2010 Project Files" in the EXE folder
so that cusotmers can customize the install package.
- Installer Wizard Messages, "nusb3mon.exe" and "nusb3utl.exe" support
the following languages.
LCID : Language
0401 : Arabic
0404 : Traditional Chinese
0405 : Czech
0406 : Danish
0407 : German

0408
0409
040A
040B
040C
040D
040E
0410
0411
0412
0413
0414
0415
0416
0419
041B
041D
041E
041F
0424
0804
0816
0C04
0C0A
2C0A

:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:

Greek
English
Spanish (Traditional)
Finnish
French
Hebrew
Hungarian
Italian
Japanese
Korean
Dutch
Norwegian (Bokmal)
Polish
Portuguese (Brazilian)
Russian
Slovak
Swedish
Thai
Turkish
Slovenian
Simplified Chinese
Portuguese(Standard)
Chinese (Hong Kong)
Spanish (Modern)
Spanish (Latin America)

- The following bugs are fixed.

1. Bluescreen sometimes occurs when starting WebCam application.
2. The mouse-supported SelectiveSuspend function does not work when
it wakes up from suspend state.
3. Can't access CD-ROM Media in a Blu-Ray Drive.
- Optimized SS/HS bulk transfer performance
--------------------------------------------------------------------------Version 1.0.10.0 : August 26th, 2009
--------------------------------------------------------------------------- This version includes the CAT files signed by
Microsoft Windows Hardware Compatibility Publisher.
This device driver complies with WHQL certification as Unclassified
Category on Windows XP, Vista & 7.
The Submission ID of WHQL certification is 1346130.
- All files except for the CAT files are the same as Version1.0.10.0 Beta2
--------------------------------------------------------------------------Version 1.0.10.0Beta2 : August 24th, 2009
--------------------------------------------------------------------------- This version includes Microsoft TestSigned CAT Files.
Note: If this driver package is used on x64 Windows Vista/7,
need to set the following command.
>bcdedit -set TESTSIGNING ON
- This installer package is generated with the InstallShield2010.
If the previous driver package (v0.X.X.X , v1.0.1.0 or v1.0.7.0) is installed,
please uninstall the previous driver package and install the new package.
- Installer Wizard Messages, "nusb3mon.exe" and "nusb3utl.exe" support

the following languages.

LCID
404
407
409
40A
40C
410
411
412
413
804
816

:
:
:
:
:
:
:
:
:
:
:
:

Language
Traditional Chinese
German
English
Spanish
French
Italian
Japanese
Korean
Dutch
Simplified Chinese
Portuguese(Standard)

- The following bugs are fixed.

1. Some hub devices are not detected after resuming Sleep and Hibernate.
2. Bluescreen occurs after resuming Sleep and Hibernate.
- Known issue. This issue will fixed in the next version.
1. Bluescreen sometimes occurs when starting WebCam application.
--------------------------------------------------------------------------Version 1.0.7.0Beta : July 17th, 2009
--------------------------------------------------------------------------- The following bugs are fixed.
1. USB Devices are not detected after resuming from Sleep and Hibernate.
2. Bluescreen occurs after resuming from Sleep and Hibernate.
3. USB-VGA Devices do not work correctly.
4. The message that bandwidth is getting low might not be indicated.
-The following function is Added
1. Add a Vender Defined Command.
--------------------------------------------------------------------------Version 1.0.1.0Beta : June 15th, 2009
--------------------------------------------------------------------------- This package includes the following applications.
1. nusb3mon.exe
This application provides the following function
USB3.0 Specificatin Section 11.1 indicates the follwoing function.
To address the situation where a USB 3.0 device is connected to a
USB 2.0-only port on a USB 3.0- capable host, after establishing a
USB 2.0 high-speed connection with the device, it is recommended
that the host inform the user that the device will support
SuperSpeed operation if it is moved to a USB 3.0-capable port on the
same host. If a USB 3.0 device is connected to a USB 3.0- capable
host via a USB 2.0 hub, it is recommended that the host inform the
user that the device will support SuperSpeed operation if it is
moved to an appropriate host port or if the hub is replaced with a
USB 3.0 hub.
2. nusb3utl.exe
This application provides functions that show Driver Version
and Firmware Version.

- The following bugs are fixed.

1. Function driver is not unloaded after resuming from Sleep and Hibernate.
2. USB Remote wake up function does not work correctly.
3. Bluescreen occured when repeating hot-plug of FS-Speaker Device
that is connected with HS-Hub that is connected to USB3.0 HC.
--------------------------------------------------------------------------Version 0.9.12.0Beta : May 29th, 2009
--------------------------------------------------------------------------- Changed installer package configuration.
1. EXE type
*All files are included in the EXE file.
*Combined x86 and x64 in one package.
2. ZIP type
*Conposed of 3 contents, setup.exe, x86 folder and x64 folder.
*All files for x86 are in x86 folder.
*All files for x64 are in x64 folder.
*Setup.exe installs drivers automatically.
--------------------------------------------------------------------------Version 0.9.12.0Beta : May 27th, 2009
--------------------------------------------------------------------------- The following bugs are fixed.
1. Function driver is not unloaded after resuming from Sleep and Hibernate.
2. When repeating hot-pulg of a USB2.0 device, the device is not detected.
3. When connecting two USB Devices and after resuming from Sleep and Hibernate,
both devices are not detected.
4. Bluescreen occurred when USB-VGA device is running.
5. Dual Display mode of a USB-VGA device can't operate.
--------------------------------------------------------------------------Version 0.9.4.0Beta : March 27th, 2009
--------------------------------------------------------------------------- Support for Super Speed Transactions
--------------------------------------------------------------------------Version 0.9.3.0Beta : March 9th, 2009
--------------------------------------------------------------------------- The following bugs are fixed.
1. If the system is booted up with a USB device already present on the USB
port, the USB port is inoperative and cannot recover even if the
USB device is unplugged and then plugged back in.
--------------------------------------------------------------------------Version 0.9.0.0Beta : February 9th, 2009
--------------------------------------------------------------------------- First Beta Version Release