Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Merlin Gerin Multi 9 CT Modular Contactors Technical PDF

    Uploaded by

    iedmond
    1) Modular contactors are used to control single or three-phase loads up to 100A in residential, commercial, and industrial applications. They act as an interface between a control signal and a power circuit to control things like lighting, motors, heating systems. 2) The contactors come in different types for closing, opening, or mixed pole operation, and some have a manual operating mechanism. They have ratings from 16A to 100A for 1 to 4 poles. 3) The contactors offer benefits like compliance with standards, silence, indication and control auxiliaries, anti-interference filtering, and compatibility with other products. They are designed for easy installation and connection in switchgear.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Merlin Gerin Multi 9 CT Modular Contactors Technical PDF

    Uploaded by

    iedmond
    1K views2 pages
    1) Modular contactors are used to control single or three-phase loads up to 100A in residential, commercial, and industrial applications. They act as an interface between a control signal and a power circuit to control things like lighting, motors, heating systems. 2) The contactors come in different types for closing, opening, or mixed pole operation, and some have a manual operating mechanism. They have ratings from 16A to 100A for 1 to 4 poles. 3) The contactors offer benefits like compliance with standards, silence, indication and control auxiliaries, anti-interference filtering, and compatibility with other products. They are designed for easy installation and connection in switchgear.

    Original Description:

    Merlin_Gerin_Multi_9_CT_Modular_Contactors_Technical

    Original Title

    Merlin_Gerin_Multi_9_CT_Modular_Contactors_Technical.pdf

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) Modular contactors are used to control single or three-phase loads up to 100A in residential, commercial, and industrial applications. They act as an interface between a control signal and a power circuit to control things like lighting, motors, heating systems. 2) The contactors come in different types for closing, opening, or mixed pole operation, and some have a manual operating mechanism. They have ratings from 16A to 100A for 1 to 4 poles. 3) The contactors offer benefits like compliance with standards, silence, indication and control auxiliaries, anti-interference filtering, and compatibility with other products. They are designed for easy installation and connection in switchgear.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views2 pages

    Merlin Gerin Multi 9 CT Modular Contactors Technical PDF

    Uploaded by

    iedmond
    1) Modular contactors are used to control single or three-phase loads up to 100A in residential, commercial, and industrial applications. They act as an interface between a control signal and a power circuit to control things like lighting, motors, heating systems. 2) The contactors come in different types for closing, opening, or mixed pole operation, and some have a manual operating mechanism. They have ratings from 16A to 100A for 1 to 4 poles. 3) The contactors offer benefits like compliance with standards, silence, indication and control auxiliaries, anti-interference filtering, and compatibility with other products. They are designed for easy installation and connection in switchgear.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CT modular contactors Multi 9 Merlin Gerin

    Modular contactors are not only used in the residential sector but in the tertiary sector or in industrial utilities for the control of single or three-phase loads up to 100 A. They act as an interface between the order giver (e.g. power utility signal, load-shedding device, pushbutton, thermostat, programmable time switch, centralised technical management,) and the power circuit for final circuits: lighting, utility motors: ventilation, heat pumps, watering system,, hot water, heating, ovens, climatic chambers

    Operation
    The range includes two types of contactors: s Contactors with no manual operating mechanism: - with closing poles, pole closing is controlled by the presence of voltage on the coil and pole opening by the disappearance of this voltage, - with opening poles, the poles are closed with the coil de-energized and open when the coil is fed with power. Mainly used for load-shedding, - with mixed poles (closing and opening). s Contactors with manual operating mechanism: they additionally allow closing or opening of the poles using the selector switch on the front panel during maintenance operations, or are used to override an automatic system. The selector switch has 3 positions: OFF/automatic operation/ manual or permanent operation.

    CT: 15962

    Adv Adv antag antag es


    A complete range of modular contactors: s 16 to 100 A ratings in single, two, three or four-pole. s Closing, opening or mixed poles with or without manual operating mechanism. s Comply with the standards in force in residential and tertiary applications: IEC61095. s Silent (< 20 dB). s With an adaptable indication auxiliary for 25 to 100 A contactors. s With control auxiliaries compatible with the reverser relay range and remote control of the C60 circuit-breaker. s Anti-interference filter. s With accessories: screw cover, clip-on markers, spacers. s Homogenous with the entire Multi 9 offer: - matching design, - same profile, - identical connections.

    The rang e
    time delay ACTt anti-interference ACTp

    (AUS01PL20-A) Auxiliaries product sheet

    ACTo+f

    CT 16 A

    CT 25 A

    CT 63 A

    CT 40-63-100 A

    impulse/latched control ACTc

    BatiBUS interface ATB1s

    Get more with the worlds Power & Control specialist

    IMPLEMENTA IMPLEMENTATION s Designed to be installed in modular switch boxes and switchboards. s Optimised dimensions: in accordance with the rating and number of poles. s Easy symmetrical rail mounting using a twostate latch. s Easy connection using grooved tunnel terminals with flap. s Mixed +/- socket screws which cannot be lost. s Auxiliaries simply clipped on to contactors. SPECIFICATIONS SPECIFICATIONS Electrical specifications s Power circuit: rating at 40C: 16 to 100 A (AC7a category). s Control circuit: s operating voltage: 24 V AC 10% 230/240 V AC: -15% +6%, s coil frequency: 50 Hz. s Electrical endurance: s AC1 and AC7a categories: - 16 A ratings, 100,000 operations - 25 A ratings, 250,000 operations - 40-63-100 A ratings, 200,000 operations. Mechanical specifications s Visualisation of contactor state on front panel (coil fed or manual operation). s Mechanical endurance: 1,000,000 operations. s Connections: s control circuit: - rigid cable: 2 x 1.5 mm2 - supple cable: 2 x 2.5 mm2 , s power circuit: - rigid cable: 6 mm 2 up to 25 A 25 mm 2 for 40 and 63 A 50 mm 2 for 100 A supple cable: 2 x 2.5 mm2 up to 25 A 2 x 10 mm2 for 40 and 63 A 2 x 35 mm2 for 100 A.820. ENVIRONMENT ENVIRONMENT s Tropicalisation: treatment 2 (relative humidity: 95% at 55C ). s Protection class: IP 201 (front panel: IP 4). s Operating temperature: - 5C to +60C. s Storage temperature: - 40C to +70C. s Complies with the strictest regulations and directives in the area of environmental protection.

    SCHEMATIC SCHEMATIC DIAGRAMS DIAGRAMS


    A1 1 A1 R1 1 A1 1 3 A1 R1 R3

    A2

    A2

    R2

    A2

    A2

    R2

    R4

    1-pole (1N/O)
    A1 1 3 5

    2-pole (1N/O+1N/C)
    A1 1 3

    2-pole (2N/O)
    5 7 A1 R1

    2-pole (2N/C)
    R3 R5 R7

    A2

    A2

    A2

    R2

    R4

    R6

    R8

    3-pole (3N/O)
    A1 R1 1 3 R3

    4-pole (4N/O)
    A1 I auto O 1

    4-pole (4N/C)
    3

    A2

    R2

    R4

    A2

    4-pole (2N/O+2N/C)

    2-pole (2N/O) manual op. mech.


    A1 1 3 5 7

    A1 I auto O

    5 I auto O
    P

    A2 A2 2 4 6

    3-pole (3N/O) manual op. mech.

    4-pole (4N/O) manual op. mech.

    SELECTION TABLE
    number power circuit of poles rating (A) 1P 2P 25 16 25 width type of control voltage in mod. contacts (V AC) (9 mm) 250 250 250 2 2 2 2 2 2 4 4 4 6 4 6 6 4 4 4 4 4 6 6 6 6 6 6 6 12 1N/O 1N/O+N/C 2N/O 2N/O 2N/O 2N/C 2N/O 2N/O 2N/O 2N/O 3N/O 3N/O 3N/O 4N/O 4N/O 4N/C 4N/C 2N/O+N/C 4N/O 4N/C 4N/O 4N/O 4N/C 4N/C 2N/O+2N/C 4N/O references circuit voltage (V AC) 230/240 230/240 230/240 230/240 24 230/240 230/240 230/240 24 230/240 230/240 230/240 230/240 230/240 24 230/240 24 230/240 230/240 230/240 230/240 24 230/240 24 230/240 230/240 man. op. with mech. without 15958 15956 15957 15959 16020 15960 15966 15971 16024 15977 15961 15967 15972 15962 16022 15963 16023 15964 15968 15969 15973 16025 15974 16026 15975 15978

    15981

    40 63 100 25 40 63 25

    250 250 250 400 400 400 400

    15984 15987

    3P

    15982

    4P

    15983

    40 63

    400 400

    15986 15988

    100

    400

    SCHNEIDER ELECTRIC HELP CENTRE Tel: 1300 369 233 Fax: 1300 369 288 Email: [email protected] www.schneider-electric.com.au

    AUS01PL19-A

    You might also like