HT-C6730W

7.1CH Blu-ray Home Theater System

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

The lighting ash and Arrowhead within Triangle Is awarning sign alerting you of dangerous voltage Inside the product.

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The explanation point within the triangle is a warning sign alerting you of important instructions accompanying the product.

WARNING
To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.

CAUTION
Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the apparatus. The Mains plug is used as a disconnect device and shall stay readily operable at any time.

CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO

LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LSER CLASE 1

DANGER
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)

CLASS 1 LASER PRODUCT

This product is classied as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specied herein may result in hazardous radiation exposure. Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

CAUTION
CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC 60825-1) THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

This product satises FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

FCC NOTE (for U.S.A)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION : FCC regulations state that any unauthorized changes or modifications to this equipment may void the users authority to operate it.

English

RF Radiation Exposure Statement This equipment complies with FCC RF Radiation Exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be colocated or operated in conjunction The final device into which this transmitter module is installed must be labeled with the following statement: "This device contains TX FCC ID: A3LDNUBS1." If this transmitter will be configured as a pc peripheral, it will be the OEM's responsibility to obtain authorization as such (either through Certification of Declaration of Conformity) prior to marketing of the device.

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these Instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachment/accessories specied by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Precautions
Ensure that the AC power supply in your house complies with the identication sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Do not place the product on ampliers or other equipment which may become hot. Make sure the ventilation slots are not covered. Do not stack anything on top of the product. Before moving the product, ensure the Disc Insert Hole is empty. In order to disconnect the product completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time. During thunderstorms, disconnect the AC main plug from the wall outlet. Voltage peaks due to lightning could damage the product. Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and malfunction of the product. Protect the product from moisture, and excess heat or equipment creating strong magnetic or electric elds (i.e. speakers.). Disconnect the power cable from the AC supply if the product malfunctions. Your product is not intended for industrial use. Use of this product is for personal use only. Condensation may occur if your product or disc has been stored in cold temperatures. If transporting the product during the winter, wait approximately 2 hours until the product has reached room temperature before using. The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.

English

Safety Information
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them.

License
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX,Inc. This is an ofcial DivX Certied device that plays DivX video. Visit www. divx.com for more information and software tools to convert your les into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. DivX Certied to play DivX video up to HD 1080p, including premium content. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674;5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio | Essential, and the DTS logos are trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved. < Open Source License Notice > In the case of using open source software, Open Source Licenses are available on the product menu.

Holding discs
Do not touch the playback side of the disc. Hold the disc by the edges so that ngerprints will not get on the surface. Do not stick paper or tape on the disc.

Disc Storage
Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean Protection jacket. Store vertically.

NOTE
dirt.

Do not allow the discs to become contaminated with Do not load cracked or scratched discs.

Handling and Storing Discs

If you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

When cleaning, wipe gently from the inside to the outside of the disc

NOTE

Copyright
2010 Samsung Electronics Co., Ltd. All rights reserved.

Condensation may form if warm air comes into

contact with cold parts inside the product. When condensation forms inside the product, it may not operate correctly. If this occurs, remove the disc and let the product stand for 1 or 2 hours with the power on.

English

Contents
SAFETY INFORMATION

2 7

2 3 3 4 4 4 7 8 9 13 14 14 15 16 18 23 25 26 27 28 29 30 31 31 31 31 33 33 33 33 33 34 34 35 35 35 36 37 37 37 37 37 37 37 38 38 38 39 39 42 42 42 43 43 43

Safety Warnings Important Safety Instructions Precautions Cautions on Handling and Storing Discs License Copyright Key features of your new Blu-ray Home Theater Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote control Connecting the Speakers Connecting External Devices/your TV via HDMI Connecting the Video Out to your TV Connecting Audio from External Components Connecting to the Network Connecting the FM Antenna Before Starting (Initial settings) Setting the Menu Display TV Aspect Ratio BD Wise (Samsung Products only) Resolution HDMI Format Movie Frame (24 Fs) Progressive Mode Still Mode HDMI Deep Color Audio Speaker Setting Musical Room Calibration EQ Optimizer HDMI Audio Digital Output Dynamic Range Control AV Sync System Initial Settings Internet@TV Screen Size Anynet+ (HDMI-CEC) BD Data Management Clock DivX(R) Registration DivX(R) Deactivation Network Setup Network Settings Network Status BD-LIVE Internet Connection Language Security Parental Rating Change Password

GETTING STARTED

CONNECTIONS

18 29

SETUP

ENGLISH

English

Contents

43 45 57 63

SETUP

43 43 43 43 43 43 44 44 44 45 45 46 47 47 48 50 52 53 54 54 55 55 57 61 61 61

General Background Energy Saving Front Display Power On/Off Sound Light Effect Support Software Upgrade Contact Samsung Playing a Disc Using the Disc menu / Title menu / Popup menu Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture Playing Back a USB Storage Device Listening to Radio Simple Playback of Internet Radio (Pandora) Using an iPod Using Internet@TV BD-LIVE Software Upgrade Notication Using the AllShare Function

BASIC FUNCTIONS

NETWORK SERVICES

OTHER INFORMATION

63 66 67

Troubleshooting Index Specications

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

English

Getting Started
Key features of your new Blu-ray Home Theater

01 Getting Started

Product Features
Playback of many disc types, plus an FM tuner
This product allows you to play various discs, including BD-ROM/RE/R, DVD-VIDEO, DVD-RW/-R (V mode), DVD+RW/+R, MP3/WMA, JPEG, DivX/MKV/MP4, and CD-R/RW, and has a sophisticated FM tuner, all in a single player.

Full HD audio decoding support (Dolby Digital, Dolby Pro Logic llx, Dolby Pro Logic llz, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD HRA, DTS-HD MA Essential)
Please refer to www.DOLBY.COM and DTS.COM for more detail.

HDMI
HDMI transmits Blu-Ray/DVD video and audio signals simultaneously, and provides a clearer picture. The 1080p (Full HD) resolution provides even clearer pictures.

AV SYNC function
Video may lag behind the audio if the product is connected to a digital TV. To compensate for this, you can adjust the audio delay time to sync up with the video.

Wireless receiver module

Samsung s rear-channel wireless receiver module does away with cables running between the product and rear-channel speakers. Instead, the rear speakers connect to a compact wireless receiver module that communicates with the product.

iPod & iPhone support

You can enjoy music files by connecting your iPod to the product with the supplied iPod dock.

BD Wise
BD Wise automatically adjusts BD Wise-compliant Samsung products to their optimal settings. This feature is enabled only if BD Wise-compliant Samsung products are connected to each other using an HDMI cable.

Internet@TV
You can download various fee charged or free of charge applications through the network connection. Various internet services and content are provided, including news, weather forecast, stock market, games, movies and music.

Blu-ray Disc Features

Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise in video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as a DVD. * The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.

Video highlights
The BD-ROM format for movie distribution supports three highly advanced video codecs, including AVC, VC-1, and MPEG-2. HD video resolutions are also available: 1920 x 1080 HD 1280 x 720 HD

For high-definition playback

To view high-definition content on a Blu-ray disc, an HDTV (High Definition Television) is required. Some discs may require using the product's HDMI OUT to view high-definition content. The ability to view high-definition content on Blu-ray disc may be limited depending on the resolution of your TV.

BD-LIVE
You can use a Blu-ray Disc supporting BD-LIVE through the network connection to enjoy special content provided by the disc manufacturer.

English

Getting Started
Icons that will be used in manual
Make sure to check the following terms before reading the user manual.
Term BD-ROM BD-RE/-R DVD-VIDEO DVD-RW (V) DVD-R DVD+RW DVD+R This indicates a function available on recorded DVD+RW or DVD-RW (V)/ DVD-R/+R discs that have been recorded and nalized. Logo Icon Definition This indicates a function available on a BD-ROM. This indicates a function available on a BD-RE/-R disc recorded in the BD-RE format. This indicates a function available on a DVD-VIDEO.

h z Z y o w G x
F !

Audio CD MP3 WMA JPEG DivX MKV MP4 USB storage device CAUTION NOTE Shortcut Key -

This indicates a function available on an audio CD-RW/-R (CD-DA format This indicates a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage media containing MP3 or WMA contents. This indicates a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage media containing JPEG contents. This indicates a function available in a CD-RW/-R, DVD-RW/-R disc or a USB storage media containing DivX contents. This indicates a function available on a USB storage device. This indicates a situation where a function does not operate or settings may be cancelled. This indicates tips or instructions on the page that help each function operate.

DivX -

This indicates a button on the remote that provides direct and easy access to a function.

This product is compatible with the NTSC color system only. PAL discs will not play.

English

01 Getting Started

Disc Types and Characteristics

Logos of Discs that can be played

Blu-ray Disc Compatibility

Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. If you encounter compatibility problems, please contact the SAMSUNG customer care center at 1-800 SAMSUNG.

Blu-ray Disc

Dolby Digital Plus

NOTE

Playback may not work for some types of discs, or

when specic operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary. Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback. When a BD-Java title is played, loading may take longer than a normal title, or some functions may perform slowly.

NTSC broadcast system in U.S.A, Canada, Korea, Japan

Dolby TrueHD

DTS-HD High Resolution Audio

Java

Discs that cannot be played

HD DVD Disc DVD-RAM 3.9 GB DVD-R Disc for Authoring. DVD-RW (VR mode) Super Audio CD (except CD layer) DVD-ROM/PD/MV-Disc, etc CVD/CD-ROM/ CDV/CD-G/CD-I/LD CDGs play audio only, not graphics. DTS-HD Master Audio | Essential BD-LIVE

NOTE

Some commercial discs and DVD discs purchased

outside your region may not be playable with this product. When these discs are played, either No disc. or Please check the regional code of the disc. will be displayed. If a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable.

English

Getting Started
Region code
Both this product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play.
Disc Type Region Code Area North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. India, China, Russia, Central and South Asia. The U.S., U.S. territories and Canada Europe, Japan, the Middle East, Egypt, South Africa, Greenland Taiwan, Korea, the Philippines, Indonesia, Hong Kong Mexico, South America, Central America, Australia, New Zealand, Pacic Islands, Caribbean Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia China

Disc Types
BD-ROM
Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Denition format, for playback on the product. This product can play back pre-recorded commercial BD-ROM discs.

BD-RE/BD-R
Blu-ray Disc Rewritable/Blu-ray Disc Recordable. BD-RE/BD-R is the ideal format for making backups, or recording personal video.

A
Blu-ray

B C

DVD-VIDEO
A digital versatile disc (DVD) can contain up to 135minutes of images, 8 audio languages and 32 subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digital surround, allowing you to enjoy vivid and clear quality images. When switching from the rst layer to the second layer of a dual-layered DVD Video disc, there may be momentary distortion in the image and sound. This is not a malfunction of the product. Once a DVD-RW/-R recorded in Video Mode is nalized, it becomes DVD-Video. Pre-recorded (pre-stamped) commercial DVDs with movies are also referred to as DVD-Videos. This product can play back pre-recorded commercial DVD discs (DVD-Video discs) with movies.

1 2 3
DVD-VIDEO

4 5 6

DVD-R/-RW
Once a DVD-R/-RW recorded in Video Mode is nalized, it becomes DVD-Video. Ability to play back may depend on recording conditions. This product can play back DVD-R disc recorded and nalized with a Samsung DVD video recorder. Playback can be perfomed with DVD-RW discs in the Video Mode and nalized only.

DVD+RW
This product can play back a DVD+RW disc recorded with a DVD Video recorder. Ability to play back may depend on recording conditions.

DVD+R
This product can play back a DVD+R disc recorded and nalized with a DVD Video recorder. Ability to play back may depend on recording conditions.

10

English

01 Getting Started

Audio CD
An audio disc on which 44.1kHz PCM Audio is recorded. This product can play back CD-DA format audio CD-R and CD-RW discs. The product may not be able to play some CD-R or CD-RW discs due to the condition of the recording.

DivX (Digital video express)

DivX is a video le format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time. MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality video and audio.

CD-R/-RW
Use a 700MB (80 minute) CD-R/-RW disc. If possible, do not use a 800MB (90 minute) or above disc, as the disc may not play back. If the CD-R/-RW disc was not recorded as a closed session, you may experience delays when playing back the beginning of the disc or all recorded les may not play. Some CD-R/-RW discs may not be playable with this product, depending on the device which was used to burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary depending on contents and discs.

Supported Formats (DivX)

This product only supports the following media formats. If both video and audio formats are not supported, the user may experience problems such as broken images or no sound. Supported Video Formats Format AVI Supported Versions DivX3.11~DivX5.1, XviD

Supported Audio Formats Format MP3 AC3 DTS Bit Rate 80~384kbps 128~384kbps 1.5Mbps Sampling Frequency 44.1khz 44.1/48khz 44.1khz

Disc Format
Using MP3 discs
CD-R/-RW, DVD-RW/-R recorded with UDF, ISO9660 or JOLIET format can be played back. Only MP3 les with the .mp3 or .MP3 extension can be played. Playable bit rate range is from 56 Kbps to 320 Kbps. Playable sample-rate is 32KHz to 48KHz. The product can handle a maximum of 1500 les and folders under a parent folder. For MP3 les recorded with a VBR (Variable Bit Rates), the sound may cut in and out.

Using JPEG discs

CD-R/-RW, DVD-RW/-R recorded with UDF, ISO9660 or JOLIET format can be played back. Only JPEG les with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed. Progressive JPEG is supported.

DivX les, including audio and video les, created in the DTS format can only support up to 6Mbps. Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels (16:9). TV screen resolutions higher than 800 are not supported. When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback. Qpel and gmc is not supported.

MKV, MP4
CD-R/-RW, DVD-R/-RW, USB, PC streaming Video Files with the following extensions can be played. : .avi, .divx, .mkv, .mp4, .AVI, .DIVX, .MKV, .MP4

DVD-RW/-R (V)
This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this product once it has been nalized. If a disc has has been recorded in Video Mode by a different makers recorder but has not been nalized, it cannot be played by this product.

NOTE

Some DivX, MKV and MP4 format discs may

not play, depending on the video resolution and frame rate condition.

English

11

Getting Started
Supported File Formats
Video File Support
File Extension Container Video Codec Divx 3.11/4.x/5.1/6.0 *.avi AVI XviD MP4v3 H.264 BP/MP/HP VC-1 AP *.mkv MKV DivX 5.1/6.0 XviD H.264 BP/MP/HP *.wmv WMV (wmv9) VC-1 AP VC-1 SM MP4 (mp4v) H.264 BP/MP/HP MPEG1 *.mpg *.mpeg PS MPEG2 H.264 BP/MP/HP WMA MP3 AC3 DTS Audio Codec MP3 AC3 DTS WMA PCM Resolution 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080

*.mp4

MP4

AAC MP1, 2 AC3 DTS

Music File Support

File Extension *.mp3 Container MP3 Audio Codec MP3 Support Range Compliant with WMA version 10 * Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48 * Bit rates - All bit-rates in the range 5kbps to 384kbps

*.wma

WMA

WMA

12

English

01 Getting Started

Notes on USB connection

Supported devices:
USB storage media, MP3 player, digital camera, USB card reader 1) Does not support if a folder or le name is longer than 125 characters. 2) A subtitle le bigger than 300 KB may not be properly displayed. 3) A certain USB/digital camera device may not be compatible with the product. 4) FAT16 and FAT32 le systems are supported. NTFS le system is not supported. 5) Photo (JPEG), music (MP3) and video le should have their names in Korean or English. Otherwise, the le may not played. 6) Connect directly to the product's USB port. Connecting through another cable may raise problems with USB compatibility. 7) Inserting more than one memory device to a multi-card reader may not operate properly. 8) PTP protocol for digital camera is not supported. 9) Do not disconnect USB device during a "loading" process.

10) Bigger the image resolution, the longer the delay to displaying. 11) DRM applied MP3 les downloaded from a commercial site are not played back. 12) External HDD device is not supported. 13) Supported le formats Format File name File extension Bit rate Version Pixel Sampling Frequency Still Picture JPG JPG .JPEG 640x480 Music MP3 .MP3 80~384kbps 44.1kHz

Accessories
Check for the supplied accessories below.
POWER
FUNCTION TV SOURCE BD RECEIVER/TV SLEEP

1 4 7
FULL SCREEN

2 5 8 0

3 6 9
REPEAT

MUTE

VOL
SFE MODE

TUNING /CH

DISC MENU

MENU

TITLE MENU POPUP

TOOLS

INFO

RETURN TUNER MEMORY

EXIT

MO/ST

A
INTERNET@

D
DSP

Video Cable (AH39-40001V)

FM Antenna (AH42-00017A)

iPod Dock (AH96-00051A)

User's Manual (AH68-02268N)

Remote Control (AH59-02298A)/ Batteries (AAA size) (4301-000116)

ASC Microphone (AH30-00099A)

English

13

Getting Started
Description

Front Panel
1 2 3 4 5 6 7 8 9 10 11 12 13

1 2 3 4 5 6 7 8 9 10 11 12 13

DISC TRAY DISPLAY REMOTE CONTROL SENSOR OPEN/CLOSE BUTTON FUNCTION BUTTON TUNING DOWN & SKIP BUTTON STOP BUTTON PLAY/PAUSE BUTTON TUNING UP & SKIP BUTTON POWER BUTTON ( VOLUME CONTROL ASC IN JACK USB PORT )

Insert disc here. Displays the playing status, time, etc. Detects signals from the remote control. Opens and closes the disc tray. Switches the mode as follows : BD/DVD D. IN AUX ONLINE HDMI 1 Goes back to the previous title/chapter/track. Tunes down the FM frequency band. Stops disc playback. Plays a disc or pauses playback. Goes to the next title/chapter/track. Tunes up the FM frequency band. Turns the product on and off. Volume adjustment. Used to connect the ASC Microphone for setting up MRC (Musical Room Calibration). A USB storage device can be connected here and used as storage when connected to BDLIVE. It can also be used for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback. HDMI 2 FM

NOTE

Software upgrades using the USB Port must be performed with a USB memory ash stick only.

14

English

01 Getting Started

Rear Panel
1 2 3 4 5 6 7 8 9 10 11 12

FM ANT

LAN
WIRELESS DIGITAL AUDIO IN HDMI IN HDMI OUT

COMPONENT OUT

iPod

OPTICAL
SPEAKER IMPEDANCE : 3

VIDEO OUT

1 2 3 4 5 6 7 8 9 10 11 12

SPEAKER OUTPUT CONNECTORS COOLING FAN iPod JACK FM 75 COAXIAL JACK TX CARD CONNECTION (WIRELESS) EXTERNAL DIGITAL OPTICAL IN JACKS (OPTICAL) HDMI IN JACKS HDMI OUT JACK LAN TERMINAL AUX IN JACKS COMPONENT VIDEO OUT JACKS VIDEO OUT JACK

Connect the front, center, surround back, subwoofer speakers. The cooling fan supplies cool air to the product to prevent overheating and always revolves when the power is on. Connect the iPod dock connector here. Connect the FM antenna. The TX card enables communication between the product and the wireless receiver module. Use this to connect external equipment capable of digital output. Receives digital video and audio signals simultaneously using an HDMI cable. Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture. Can be used for network based services (see pages 57~62), BD-LIVE and software upgrade under the network connection. Connect to the 2CH analog output of an external device (such as a VCR) Connect a TV with Component video inputs to these jacks. Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT Jack on this product.

! CAUTION
Provide a minimum of 4 inches of clearance on all sides of the the home theater to ensure adequate
ventillation.

Do not obstruct the cooling fan or ventilation holes.

English

15

Getting Started
Remote control

Tour of the Remote Control

FUNCTION TV SOURCE

POWER

Turn the product on and off. If you want to change to Home Theater or TV mode on the remote control, check this button's LED color. - Home Theater : Orange
BD RECEIVER/TV SLEEP

Use to select the mode. or Press to select TV's video mode. Set a Sleep time to shut off the procuct. To open and close the disc tray.

1 4 7
FULL SCREEN

2 5 8 0

3 6 9
REPEAT

Press numeric buttons to operate options.

Press this to see the full screen on a TV.

Allows you to repeat a title, chapter, track or disc. Press to search backwards or forwards. Press to pause a disc.

Press to skip backwards or forwards. Press to stop/play a disc. Cut off the sound temporarily. Adjust the volume.
VOL
SFE MODE MUTE

TUNING /CH

Search for active FM stations and change channels. You can set the SFE (Sound Field Effect) mode best suited for the type of music you are listening to. Use this to enter the popup menu/title menu. Use this to display the playback information when playing a Blu-ray/DVD disc. Press this to exit the menu.

Press this to move to the home menu. Press to view the disc menu. Press this to use the Tools menu. Select on-screen menu items and change menu value. Return to the previous menu. These buttons are used both for menus on the product and also several Blu-ray Disc functions. Press this to link to various Internet@TV services. Select the desired Dolby Pro Logic II audio mode.

DISC MENU

MENU

TITLE MENU POPUP

TOOLS

INFO

RETURN TUNER MEMORY

EXIT

MO/ST

Used to set a preset radio frequency. Select MONO or STEREO for radio broadcasting. Regulate and stabilize the volume level. (Digital Signal Processor)

A
INTERNET@

D
DSP

16

English

01 Getting Started

Installing batteries in the Remote Control

* Battery size: AAA

TV Brand Code List

Brand
Admiral (M.Wards) A Mark Anam AOC Bell & Howell (M.Wards) Brocsonic Candle Cetronic Citizen Cinema Classic Concerto Contec Coronado Craig Croslex Crown Curtis Mates CXC

Code
56, 57, 58 01, 15 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 01, 18, 40, 48 57, 58, 81 59, 60 18 03 03, 18, 25 97 03 18 46 15 03, 05, 61, 82, 83, 84 62 03 59, 61, 63 03 02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90 40 03 03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85 19, 65 03 03 06, 40, 56, 59, 66, 67, 68 40 15, 18, 50, 59, 69 45 56, 59, 67, 86 70 59, 61, 87, 88 03, 15, 40 15 01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44 18 19, 54, 56, 59, 60, 62, 63, 65, 71 15, 17, 18, 48, 54, 59, 60, 62, 72, 89 40, 54 54 18, 40

Brand
Mitsubishi/ MGA MTC NEC Nikei Onking Onwa Panasonic Penney Philco Philips Pioneer Portland Proton Quasar Radio Shack RCA/ Proscan Realistic Sampo Samsung Sanyo Scott Sears Sharp Signature 2000 (M.Wards) Sony Soundesign Spectricon SSS Sylvania Symphonic Tatung Techwood Teknika TMK Toshiba Vidtech Videch Wards Yamaha York Yupiteru Zenith Zonda Dongyang

Code
18, 40, 59, 60, 75 18 18, 19, 20, 40, 59, 60 03 03 03 06, 07, 08, 09, 54, 66, 67, 73, 74 18 03, 15, 17, 18, 48, 54, 59, 62, 69, 90 15, 17, 18, 40, 48, 54, 62, 72 63, 66, 80, 91 15, 18, 59 40 06, 66, 67 17, 48, 56, 60, 61, 75 18, 59, 67, 76, 77, 78, 92, 93, 94 03, 19 40 00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98 19, 61, 65 03, 40, 60, 61 15, 18, 19 15, 57, 64 57, 58 50, 51, 52, 53, 55 03, 40 01 18 18, 40, 48, 54, 59, 60, 62 61, 95, 96 06 18 03, 15, 18, 25 18, 40 19, 57, 63, 71 18 59, 60, 69 15, 17, 18, 40, 48, 54, 60, 64 18 40 03 58, 79 01 03, 54

NOTE

Make sure to match the + and ends of

the batteries with the diagram inside the compartment. Assuming typical TV usage, the batteries last for about one year. The remote control can be used up to approximately 23 feet (7 meters) in a straight line.

Setting the Remote Control

You can control certain functions of your TV with this remote control. When operating a TV with the remote control 1. Press the BD RECEIVER/TV button to set the remote control to TV mode. 2. Turn on the TV. 3. While holding down the POWER button, enter the code corresponding to your brand of TV. If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. Example : For a Samsung TV While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17, or 40. 4. If the TV turns off, the setting is complete. You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).

Daewoo

Daytron Dynasty Emerson Fisher Funai Futuretech General Electric (GE) Hall Mark Hitachi Inkel JC Penny JVC KTV KEC KMC LG (Goldstar) Luxman LXI (Sears) Magnavox Marantz Matsui MGA

NOTE

The remote control may not work on some

brands of TV's. Also, some operations may not be possible, depending on your brand of TV. The remote control will work with Samsung TVs by default.

English

17

Connections
This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers

2~3m
BD BD

2~3m

Installing the DPL IIx Position of the product

Place it on a stand or cabinet shelf, or under the TV stand.

Installing the DPL IIz

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 6.56 ~ 7.87 feet (2~2.4m) For 55" TV's 11.5 ~ 13.1 feet (3.5~4m) Place these speakers in front of your listening position, facing inwards (about 45) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers. It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV. Place these speakers to the sides of your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ear, facing slightly downward. Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects and sound will not come from them all the time.

Front Speakers ei Center Speaker f

Surround Speakershj

Surround Back Speakers SBL SBR Subwoofer g

If you are using two back surround speakers, place them behind the listening position and about 2.3-3.3 feet (70 cm to 1 m) above your ears. The position of the subwoofer is not so critical. Place it anywhere you like.

NOTE

Setting the rear surround speakers above the front left and right speakers FHL FHR 1. Mount the rear surround left/right speakers on the wall above the front left/right speakers. 2. It is recommended that the rear surround speakers be mounted at least 3.3 feet above the front left/right speakers to achieve the height effect.

When installing speakers on a wall, make sure the speakers are rmly xed. If you change the speaker positions, run the speaker calibration again. When installing surround back speakers or front top channel speakers, some of the speaker cables may be exposed.
English

18

02 Connections

Speaker Components

Assembled Speakers

(L) (R)
SCREW (5x15): 2EA

SCREW (4x20): 8EA STAND FRONT

CENTER SPEAKER

CENTER STAND BASE

FRONT SPEAKER SUBWOOFER

(L) (R)

(L) (R)

SUBWOOFER SURROUND SURROUND BACK SPEAKER CABLE SURROUND SPEAKER SURROUND BACK SPEAKER

SWA-5000

TX Card

Wireless Receiver Module

Speaker Cable (2EA)

NOTE

Refer to page 20 to install the Speakers on the Tallboy Stand.

English

19

Connections
Installing the Speakers on the Tallboy Stand
1. Turn the Stand Base upside-down and connect it to the Stand.

1
Stand Base Stand

2. Insert small screws (4x20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.

! CAUTION
When you use a torque screwdriver, be careful not to put
excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm) 3. Connect the upper Speaker to the assembled Stand.

Speaker

Stand

4. Insert another large screw (5x15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

5. This is the appearance after the speaker is installed. Follow this steps to install other speaker.

20

English

02 Connections

Connecting The Speakers

1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal () and the red wire into the red (+) terminal, and then release the tab. 3. Connect the connecting plugs to the back of the product by matching the colors of the speaker plugs to the speaker jacks. 4. With the product turned off, insert the TX card into the TX Card Connection (WIRELESS) on the back of the product. Hold the TX card so that the label "WIRELESS" faces upward and insert the card into the port. The TX card enables communication between the product and the wireless receiver module. 5. Connect the left and right surround speakers to the wireless receiver module. 6. Plug the power cord of the wireless receiver module into the wall outlet. 7. Turn on the product. The product and wireless receiver module will now communicate with each other and you will hear sound from the Surround speakers.

Black

Red

iPod

TX card

Front Speaker (R) Center Speaker

Front Speaker (L)

Surround Back Speaker (R)

Surround Back Speaker (L)

SPEAKER IMPEDANCE : 3

Surround Speaker (L)

Surround Speaker (R)

FM ANT

WIRE W iPod

Subwoofer

Wireless Receiver Module This product should be connected to the SWA-5000 only.

SPEAKER IMPEDANCE : 3

English

21

Connections
! CAUTION
Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/) is correct. Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands
or alien substances into the duct (hole) of the subwoofer speaker.

Do not hang the subwoofer on the wall through the duct (hole). Do not insert any other card except the TX card specically for this product.
If you use a different TX card, the product may be damaged or you may not be able to remove the card easily. Do not insert the TX card upside down or in the reverse direction. Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem. The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture. For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions. If you hear no sound from the wireless surround speakers, switch the mode to DVD 5.1 channel or Dolby Pro Logic II. In 2-CH mode, you will hear no sound from the wireless surround speakers.

NOTE

If you place a speaker near your TV set, screen color may be distorted because of the magnetic
eld generated by the speaker. If this occurs, place the speaker away from your TV set.

Place the wireless receiver module at the rear of the listening position. If the wireless receiver
module is too close to the product, it may cause some sound interruption due to interference.

If you use a device such as a microwave oven, wireless LAN Card or any other device that uses
the same frequency (2.4/5.8GHz) near the product, it may cause some sound interruption due to interference. The transmission distance from the product to the wireless receiver module is about 33 feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal. If the product doesn't make wireless connection, the system needs ID Setting between the product and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote control, and then turn on the product. With the wireless receiver module turned on, press the "ID SET" button on the back of the wireless receiver module for 5 seconds.

22

English

02 Connections

Connecting External Devices/your TV via HDMI

HDMI is the standard digital interface for connecting to devices such as a TV, projector, DVD player, Blu-ray player, set top box, and more. Becuase HDMI is all digital, you'll enjoy digital quality video and sound as it was originally created, without the distortions that can be caused when digital content is converted to analog. DVD or Blu-ray Player SAT (Satellite/Set top box)

HDMI IN
FM ANT

LAN
WIRELESS DIGITAL AUDIO IN HDMI IN HDMI OUT

COMPONENT OUT

iPod

OPTICAL
SPEAKER IMPEDANCE : 3

VIDEO OUT

HDMI OUT

HDMI OUT : Connecting to a TV with an HDMI Cable (BEST QUALITY)

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

NOTE

Certain HDMI output resolutions may not work, depending on your TV. If an HDMI cable is connected or removed during playback of a CD-DA, MP3 or JPEG le, the product will
stop playing.

After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your product. See your TV owner's manual for more information on how to select the TV's Video Input source. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select HDMI as the external source of the TV.

English

23

Connections
Connecting External Devices/your TV via HDMI

HDMI IN : Connecting to an External Component with an HDMI Cable

1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. 2. Press the FUNCTION button to select HDMI 1 or HDMI 2 input. The mode switches as follows : BD/DVD D. IN AUX ONLINE HDMI 1 HDMI 2 FM

HDMI Auto Detection Function

The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. For possible HDMI resolutions, see page 32. HDMI connection description - HDMI outputs only a pure digital signal to the TV. - If your TV does not support HDCP, random noise appears on the screen. What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

! CAUTION
The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the
product.

24

English

02 Connections

Connecting the Video Out to your TV

Red Blue Green

METHOD 1
LAN
COMPONENT OUT

METHOD 2
Yellow
VIDEO OUT

METHOD 1 : Component Video (BETTER QUALITY)

If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the product to the Component Video Input Jacks on your TV.

NOTE

You can select from a variety of resolution settings such as 1080i, 720p, 480p and 480i, depending on the disc type. (See page 32) The actual resolution may differ from the setting in the Setup menu if both Component and HDMI cables are connected.
The resolution may also be different depending on the disc. (See page 32)

After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI,
Component or Composite) on your product. See your TV owner's manual for more information on how to select the TV's Video Input source. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select COMPONENT as the external source of the TV. In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i, 720p or 480p mode, the Display Setup menu will show the output resolution as 1080p, 1080i, 720p or 480p in the menu. The resolution is actually 480i.

METHOD 2 : Composite Video (GOOD QUALITY)

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.

NOTE

The VIDEO source is always output in 480i resolution regardless of the resolution set in the Setup menu. (See page 32) After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI,
Component or Composite) on your product. See your TV owner's manual for more information on how to select the TV's Video Input source. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select VIDEO as the external source of the TV.

! CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection
systems and the picture will be distorted on the television.

English

25

Connections
Connecting Audio from External Components

LAN
DIGITAL AUDIO IN HDMI IN HDMI OUT

COMPONENT OUT

OPTICAL VIDEO OUT

Red Optical Cable (not supplied)

White Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right.

Set-Top Box OPTICAL

VCR AUX

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component. 2. Press the FUNCTION button to select D.IN input. The mode switches as follows : BD/DVD D. IN AUX ONLINE HDMI 1 HDMI 2 FM

NOTE

To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV. This system supports Digital sampling frequencies of 32 kHz of higher from external digital components. This system supports only DTS and Dolby Digital audio, MPEG audio (bitstream) is not supported.

AUX : Connecting an External Analog Component

Analog signal components such as a VCR. 1. Connect AUX IN (Audio) on the product to the Audio Out of the external analog component. Be sure to match connector colors. 2. Press the FUNCTION button to select AUX input. The mode switches as follows : BD/DVD D. IN AUX ONLINE HDMI 1 HDMI 2 FM

NOTE

You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the
VCR to this product.

26

English

02 Connections

Connecting to the Network

This product enables you to view network based services (See pages 57~62) such as Internet@TV and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an AP (Access Point) or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance.

Cable Network
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN terminal of your modem. 2. Set the network options. (See page 39)

LAN
HDMI IN HDMI OUT

COMPONENT OUT

VIDEO OUT

Router Broadband modem (with integrated router) Broadband service

Or

Broadband modem Broadband service

Networking with PC for AllShare function (See pages 61~62)

NOTE

Internet access to Samsungs software update server may not be allowed, depending on the router you use or the
ISPs policy. For more information, contact your ISP (Internet Service Provider).

For DSL users, please use a router to make a network connection. For the AllShare function, a PC must be connected in the network as shown in the gure.
English

27

Connections
Connecting to the Network

Wireless Network
Broadband service

Wireless IP sharer PC

Networking with PC for AllShare function (See pages 61~62)

You can connect the player to your network with a Wireless IP sharer. A wireless AP/IP router is required to make a wireless network connection. To set the network options, see page 39. NOTE You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.) Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc). Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported. When applying the security key for the AP (wireless IP sharer), only the following security protocols are supported: 1) Authentication Mode : WEP, WPAPSK, WPA2PSK 2) Encryption Type : WEP, AES

For the AllShare function, a PC must be connected in the network as shown in the gure.
Connecting the FM Antenna

FM Antenna (supplied)

1. Connect the FM antenna supplied to the FM 75 COAXIAL jack. 2. Slowly move the antenna wire around until you nd a location where reception is good, then fasten it to a wall or other rigid surface.

FM ANT

WIRELESS iPod

DIGIRA AODIO I OPTICA

NOTE

This product does not receive AM

broadcasts.

28

English

Setup
Before Starting (Initial Settings)
1. Turn on your TV after connecting the product. (When the product is connected to TV for the rst time, the product will turn on automatically and display the Initial Settings screen.)
Initial Settings I On-Screen Language
Select a language for the on-screen displays. English Franais Deutsch Espaol Italiano Nederlands > Move s Select

03 Setup

7. Press the buttons to select the desired Network Settings : Wired, Wireless or PBC (WPS), and then press the ENTER button. If you do not know your Network Settings, press the BLUE (D) button on your remote instead to skip Network Settings here, nish the Initial Settings, and go to the Home menu. If you selected a Network Setting, go to pages 39~42 for more information about the Network settings. When done, go to Step 8.
Initial Settings I Network
Network Setting is needed to use various Internet services. Choose the primary method for connecting to network. Wired : Set the network by using Ethernet cable. Please make sure that Ethernet cable is connected.

2. Press the buttons to select the desired language, then press the ENTER button. 3. Press the ENTER button to Start.
Initial Settings
TV Aspect, Musical Room Calibration and Network will be set. Each setting may be changed later under "Settings"

Wired

Wireless

PBC (WPS)

a Previous d Skip

< Move " Select

8. Press the OK button. The home menu appears. (For more information about home menu, please see page 30)
Home Menu

Start

a Previous

" Select

You Tube internet radio service Please activate Internet@TV to enjoy a variety of Internet Services.

4. Press the buttons to select the desired TV aspect ratio, then press the ENTER button. (See page 31) The Musical Room Calibration screen appears. 5. Plug the ASC microphone into the ASC IN jack on the product. (See page 35) 6. Press the ENTER button to Start.
Initial Settings I Musical Room Calibration

No Disc

a Change Device

d View Devices

" Enter

NOTE

When the product is connected to TV for the

rst time, product will turn on automatically. This is not a malfunction. The home menu will not appear if you do not congure the initial settings. If you press the BLUE (D) button during the Musical Room Calibration/Network setup, you can access the home menu even if the network setup is not completed yet. When you return to the home menu, the full screen mode is cancelled automatically.

Preparing...

d Skip

Setting the Musical Room Calibration function takes about 3 minutes.

English

29

Setup
If you want to display Initial Settings screen
again to make changes, press the STOP () button on the front panel of the product for more than 5 seconds with no disc inserted. Use the HDMI cable to connect the product to an Anynet+ (HDMI-CEC)-compliant Samsung TV. If the TV uses a language supported by the product, that language will be set to a preferred language automatically. For this to work, the Anynet+ (HDMI-CEC) feature must be set to On in both TV and the product. If the product is left in the stop mode for more than 5 minutes without being operated, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 25 minutes, the power will automatically turn off except during playback of a CD-DA (Automatic Power-Off Function). 1. Press the POWER button. The Home Menu appears.
Home Menu

You Tube internet radio service Please activate Internet@TV to enjoy a variety of Internet Services.

2 3 4 5

1
No Disc
a Change Device d View Devices

" Enter

1 2 3 4

Selects the Internet@TV. Selects the Videos. Selects the Music. Selects the Photos. Selects the Settings. Displays buttons available.

Setting the Menu

DISC MENU MENU TITLE MENU POPUP

5 6

1
TOOLS

INFO

3 2
RETURN TUNER EXIT

2. Press the buttons to select Settings, then press the ENTER button. 3. Press the buttons to select the desired submenu, then press the ENTER button. 4. Press the buttons to select the desired item, then press the ENTER button. 5. Press the EXIT button to exit the menu.

1 2

MENU Button : Press this to move to the home menu. RETURN Button : Return to the previous menu. ENTER / DIRECTION Button: Press the arrow buttons to move the cursor and select an item. Press the ENTER button to launch the selected item or conrm the setting. EXIT Button : Press this to exit the menu.

NOTE

When the product is connected to the network,

select Internet@TV from the home menu. Download desired content from Samsung AppS. The access steps may differ depending on the selected menu. The OSD (On Screen Display) may change in this product after you upgrade the software version.

30

English

03 Setup

Display
You can congure various display options such as the TV Aspect Ratio, the Resolution, etc.

BD Wise (Samsung Products only)

BD Wise is Samsung's latest inter-connectivity feature. When you connect Samsung products with BD-Wise to each other via HDMI, the optimum resolution is set automatically. Off : The output resolution is xed according to the resolution previously set, regardless of the resolution of the disc. On : The original resolution of the BD/DVD disc is output to the TV.

TV Aspect Ratio
Depending on the type of television you have, you may want to adjust the screen aspect ratio.

16:9 Normal
Certain movies (4:3 source) are displayed in 4:3 Pillarbox (black bars on sides of picture) if 16:9 normal is selected.

NOTE

If you want to change the resolution in BD

16:9 Wide
You can view the full 16:9 picture on your widescreen TV.

If you set BD Wise to off, the resolution of the

Wise, you must set BD Wise to Off in advance.

4:3 Letter Box

Select when you want to see the full 16:9 ratio screen supplied by a Blu-ray Disc/ DVD, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

connected TV will be adjusted to its maximum resolution automatically. If the product is connected to a device that does not support BD Wise, you can not use the BD Wise function. For a proper operation of BD Wise, set the BD Wise menu of both the product and the TV to On.

Resolution
Sets the output resolution of the Component and HDMI video signal. The number in 1080p, 1080i, 720p, 480p, or 480i indicates the number of lines of video. The i and p indicate interlaced and progressive scan, respectively. Auto : Automatically checks and sets the optimal resolution. (HDMI only) BD Wise : Automatically sets the optimal resolution when connected via HDMI to a TV with the BD Wise feature. (The BD Wise menu item appears only if BD Wise is set to On.) HDMI only. 1080p : Outputs 1080 lines of progressive video. (HDMI only) 1080i : Outputs 1080 lines of interlaced video. 720p : Outputs 720 lines of progressive video. 480p : Outputs 480 lines of progressive video. 480i : Outputs 480 lines of interlaced video. (Component & VIDEO only)

4:3 Pan-Scan
Select when you want to see the 16:9 video supplied by the Blu-ray Disc/DVD without the black bars on top and bottom, even though you have a TV with a 4:3 ratio screen. The extreme left and right portion of the movie picture will be cut off.

NOTE

Depending on the disc type, some aspect ratios If you select an aspect ratio and option which is
may not be available. different than the aspect ratio of your TV screen, the picture might appear distorted. If you select the 4:3 Pan-Scan or 4:3 Letter Box, you can't see full screen by pressing the FULL SCREEN button on the remote control.

English

31

Setup
Resolution according to the output mode
Blu-ray Disc playback
Output HDMI Mode Auto 1080p, Movie Frame (24Fs) off 1080p/1080i, Movie Frame (24Fs) on 1080i, Movie Frame (24Fs) off 720p 480p 480i Optimal Resolution 1080p@60F 1080p@24F 1080i 720p 480p HDMI / connected Component/VIDEO Mode 480i 480i 480i 480i 480i 480i HDMI / not connected Component Mode 1080i 720p 480p 480i VIDEO Mode 480i 480i 480i 480i

Setup

DVD playback
Setup Auto 1080p 1080i 720p 480p 480i Output HDMI Mode Optimal Resolution 1080p@60F 1080i 720p 480p HDMI / connected Component/VIDEO Mode 480i 480i 480i 480i 480i HDMI / not connected Component Mode 480p 480p 480p 480i VIDEO Mode 480i 480i 480i 480i

NOTE

When the factory default settings are restored,

all user BD data is deleted.

If the connected TV does not support Movie

Frame or the selected resolution, the message If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection? will be displayed. If you select Yes and the resolution is not supported, the TV's screen will be blank. Please wait for 15 seconds and the resolution reverts to the previous value automatically. If the screen is blank, press and hold the STOP () button on the front of the product for more than 5 seconds (no disc inserted). All settings are restored to the factory default. Follow the steps on the previous page to access each mode and select the Display Setup that your TV will support.

The Blu-ray Disc must have the 24 frame

feature in order to use the Movie Frame (24Fs) mode. If both HDMI and Component jacks are connected and you are currently viewing component output, there may be a difference between the resolution listed in the table and actual resolution depending on your TV. If the HDMI Auto Detection feature does not work, you can't select the 1080p resolution or Movie Frame (24Fs).

32

English

03 Setup

HDMI Format
You can optimize the color setting from the HDMI output by selecting a connected device Type: TV : Select if connected to a TV via HDMI. Monitor : Select if connected to a Monitor via HDMI.

Progressive Mode
Set to improve picture quality when you view DVDs. Auto : Select to have the product automatically set the best picture for the DVD you're watching. Video : Select for the best picture from Concert or TV show DVDs.

NOTE

A TV or monitor has to be connected to the

product before you select this option.

Still Mode
Set the type of picture the home theater shows when you pause DVD playback. Auto: Automatically show the best still picture depending on the content. Frame : Select when pausing a scene with a little action. Field : Select when pausing a scene with a lot of action.

Movie Frame (24 Fs)

Setting the Movie Frame (24Fs) feature to On allows you to adjust the product's HDMI output to 24 frames per second for improved picture quality. You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. This menu can only be selected in 1080i or 1080p HDMI output resolution modes. Off : Movie Frame (24Fs) function is off. On : Movie Frame (24Fs) function is on.

HDMI Deep Color

Set to output the picture from the HDMI OUT jack with Deep Color or without. Deep Color allows more accurate color reproduction with deeper color depth. Auto: The picture will be output with Deep Color to the connected TV which supports HDMI Deep Color. Off : The picture will be output without Deep Color.

NOTE

Two types of frame rates may be included,

depending on the disc: Movie material (24 frame) and Video material (30 frame). When the setting switches between Movie (24 frame) and Video (30 frame), the screen may blink for a few seconds. If your TV does not support Movie Frame (24Fs) function, a pop-up message is displayed.

English

33

Setup
Audio Distance
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, center, surround, surround back and subwoofer speakers. You can set the Speaker Distance between 1ft (0.3m) and 30ft (9.0m).
Settings
Display Audio System Network Language Security General Support Distance
Front L : 10ft (3.0m) | Front R : 10ft (3.0m) Center : 10ft (3.0m) Surround L : 10ft (3.0m) Surround R : 10ft (3.0m) Surround Back L : 10ft (3.0m) Surround Back R : 10ft (3.0m) Subwoofer : 10ft (3.0m) Test Tone : Off <Change s Select r Return

Speaker Setting
DPL llz
Off : Select when you place the Surround Back speakers as shown. On: Provide a more realistic 3D surround sound with vertical surround system.
Settings
Display Audio System Network Language Security General Support Speaker Setting
DPL IIz Level Distance Test tone : Off :

Off |

s Select

r Return

Test Tone Level

You can adjust the balance and level for each speaker. Adjusting Front/Center/Surround /Surround Back/Subwoofer Speaker Level The volume level can be adjusted in steps from +6dB to -6dB. The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Settings
Display Audio System Network Language Security General Support Level
Front L : Front R : Center : Surround L : Surround R : Surround Back L : Surround Back R : Subwoofer : Test Tone :
0 dB |

Use the Test Tone feature to check the speaker connections. Press the or button to select All. A test tone will be sent to Front Left Center Front Right Surround Right Surround Back R Surround Back L Surround Left Subwoofer in order so you can make sure the speakers are set up correctly. To stop the test tone, press the or button to select Off.
Settings
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB Off

Speaker Setting
DPL IIz Level Distance Test Tone : All | : Off

<Change s Select r Return

Display Audio System Network Language Security General Support

<Change s Select r Return

NOTE

When HDMI Audio is ON, audio is produced

through the TV speakers. The Test Tone function is not available.

34

English

03

Musical Room Calibration

By setting the Musical Room Calibration (MRC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-channel sound eld optimized for your environment.

NOTE

Setup

Setting the Musical Room Calibration You can only use the Musical Room Calibration
setup if there is no disc in the player. function takes about 3 minutes.

If the ASC microphone is disconnected during the

Musical Room Calibration setup, the setup will be canceled. When the Musical Room Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode will not work. If the product is connected to external devices or other components (such as an iPod, AUX, D.IN), the Musical Room Calibration Setup may not work properly.

EQ Optimizer
ASC microphone

Set optimal EQ automatically depending on the region. Off : Turn EQ Optimizer off. On : Turn EQ Optimizer on.

HDMI Audio
Musical Room Calibration
Turns the Musical Room Calibration mode on and off. Off: You hear the speakers set to the User Speaker Setting values. On: You hear the speakers set to the Musical Room Calibration mode values. The audio signals transmitted over the HDMI Cable can be toggled On and Off. Off : Video is transmitted over the HDMI connection cable only, and audio is output through your product speakers only. On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.

Musical Room Calibration Setting

1. Plug the ASC microphone into the ASC IN jack. 2. Place the ASC microphone at the listening position. Musical Room Calibration runs automatically in the following sequence: Front Left Center Front Right Surround Right Surround Back L Surround Back R Surround Left Subwoofer Press the RETURN button to cancel the Musical Room Calibration Setting.

NOTE

HDMI Audio is automatically down-mixed to

2ch for TV speakers.

English

35

Setup
Digital Output
Set Digital output depending on the connected receiver. (For more details, please refer to the digital output selection). PCM Bistream (Re-encode) Bistream (Audiophile) Blu-ray Discs may include three audio streams. - Primary Audio : The audio soundtrack of the main feature. - Secondary Audio : Additional soundtrack such as director or actor's commentary. - Interactive Audio : Interactive sounds will be heard when selected. Interactive Audio is different on each Blu-ray Disc.

NOTE
Be sure to select the correct Digital Output
or you will hear no sound or a loud noise.

If the HDMI device (Receiver, TV) is not compatible

with a compressed format (Dolby digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have Secondary and Effect

audio.

Some Blu-ray Discs do not have Secondary and

Effect audio.

This Digital Output setup does not affect the

analog (L/R) audio or HDMI audio output to your TV. It affects the optical and HDMI audio output when the home theater is connected to a receiver.

If you play MPEG audio soundtracks, audio signal

outputs PCM regardless of Digital Output Selections (PCM or Bitstream).

Digital Output Selection

Bitstream (Re-encode) Optical PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch DTS re-encoded DTS re-encoded DTS re-encoded DTS re-encoded DTS re-encoded DTS re-encoded DTS re-encoded PCM 2ch Dolby Digital DTS PCM Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD HRA DTS-HD MA PCM 2ch Dolby Digital DTS Bitstream (Audiophile) Optical PCM 2ch Dolby Digital Dolby Digital Dolby Digital DTS DTS DTS PCM 2ch Dolby Digital DTS

Setup Connection PCM Dolby Digital Audio Stream on Blu-ray Disc Dolby TrueHD DTS DTS-HD HRA DTS-HD MA PCM Audio Stream on DVD Dolby Digital DTS Dolby Digital Plus

PCM HDMI Receiver Up to 7.1ch Up to 5.1ch Up to 7.1ch Up to 7.1ch Up to 6.1ch Up to 7.1ch Up to 7.1ch PCM 2ch Up to 5.1ch Up to 6.1ch

HDMI Receiver or Optical HDMI Receiver

Denition for Blu-ray Disc

Any

Decodes Primary, Secondary and Effect audio streams together into PCM audio.

Outputs only the Primary audio Decodes Primary, Secondary and soundtrack (main soundtrack of the Effect audio streams together into movie) so that your receiver can decode PCM audio, then re-encodes the the audio bitstream. You will not hear PCM audio into DTS bitstream. Secondary and Effect audio.

36

English

03 Setup

Dynamic Range Control

You can listen at low volumes but still hear dialog clearly. This is only active when a Dolby Digital signal is detected. Off : Turn Dynamic Range Control off. On : Choose to listen to a movie at a lower volume without losing clarity of dialog. Auto : The Dynamic Range Control is set automatically based on the information provided by the Dolby TrueHD Soundtrack.

Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to a Samsung TV with an HDMI cable. You can operate this product using a Samsung TV remote control and start disc playback simply by pressing the PLAY () button on the TVs remote control. For more information, please see the TV user manual. Off : Anynet+ function is off. On : Anynet+ function is on.

AV Sync
Video may not sync with the audio when the product is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. You can set the audio delay time between 0 msec and 300 msec. Adjust it to the optimal setting.

NOTE

This function is not available if the HDMI cable

does not support CEC.

If your Samsung TV has an n logo, then

it supports the Anynet+ function.

System

Depending on your TV, certain HDMI output

resolutions may not work. Please refer to the user manual of your TV. The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the product.

Initial Settings
By using the Initial Settings, you can set language, TV aspect, Musical Room Calibration and Network setting, etc. For more information on the settings, refer to the corresponding section in this user manual.

BD Data Management
Lets you manage the downloaded contents from a Blu-ray Disc that supports the BD-LIVE service. You can check the device information including the storage size, delete the BD data or change the Flash memory device. Change Device allows you to select either the product's Internal Memory or External Memory (connected USB Device). If the data to be stored from BD-LIVE is greater than the size of the remaining memory or the Internal Memory is full, connect an External USB device, then select External Device in the menu.
Settings
Display Audio System Network Language Security General Support On-Screen Menu : BD Data Management Disc Menu Current Device : Internal Flash:Memory
Total Size Audio : 703MB

Internet@TV Screen Size

Set the Internet@TV Screen to the optimal size. Size 1 : Display smaller application icons. You may see some black on the sides of the screen. Size 2 : Display normal application icons. Size 3 : Display larger application icons. The image may be too large for your TV screen.

Subtitle : 703MB Available Size

Delete BD Data Change Device

: :
|

: Internal Flash Memory " Select ' Return

English

37

Setup
Description of Device (Storage) Information on the Product Total Size : Total size of the Device (Storage). Available Size : Available size of the Device (Storage).

DivX(R) Registration
View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content.
Settings
Display Audio System Network Language Security General Support Initial Setting Disc Menu : DivX(R) Video On Demand: Audio Your registration code is : XXXXXXXXXX Subtitle :
To learn more visit www.divx.com/vod OK

NOTE

In the external memory mode, disc playback

will be stopped if you disconnect the USB device in the middle of the playback. Only those USB devices formatted in FAT le system (DOS 8.3 volume label) are supported. We recommend you use USB devices that support USB 2.0 protocol with a 4 MB/sec or faster read/write speed. The Resume Play function may not work after you format the storage device. The total size of BD Data Management may differ, depending on the software version.

NOTE

This option is not activated if you select OK.

To activate this option, please activate the DivX(R) Deactivation.

Clock
Set time-related functions.
Settings
Display On-Screen ClockMenu : Audio Clock Mode Disc Menu : : Auto | System Clock Set Audio : Network Time Zone Subtitle : GMT + 0:00: Language DST : Off Security General > Move s Select r Return Support

DivX(R) Deactivation
Select this to get a new registration code.
Settings
Display Audio System Network Language Security General Support Initial Setting Disc Menu : Audio : Subtitle : Do you want to deactivate your device?

Yes

No

Clock Mode : You can select Auto or Manual. If you select Manual, the Clock Set menu will be activated while DST will be deactivated. Clock Set : You can specify the current time and date manually. Time Zone : You can specify the time zone that is applicable to your area. DST : You can set DST (Daylight Saving Time) 1 hour, 2 hours and off.

NOTE

This function can be operated when DivX(R)

Registration function is deactivated.

38

English

03 Setup

Network Setup
To begin setting up the network connection for your product, follow these steps:

Settings
Network Settings Display On-Screen Menu Internet Protocol Setup : Auto Audio Disc Menu 0 IP Address : 0 System Audio 0 Subnet Mask : 0 Subtitle Network 0 Gateway : 0 Language DNS : Auto Security 0 DNS Server : 0 General Support
> Move " Select

1. In the Home menu, press the buttons to select the Settings, and then press the ENTER button. 2. Press the buttons to select Network, and then press the ENTER button. 3. Press the buttons to select Network Setting, and then press the ENTER button. 4. Press the buttons to select Network Type, and then press the ENTER button. 5. Press the buttons to select Wired or Wireless, and then press the ENTER button. 6. Go to the next section.

: : 0 : 0 :
0

\ 0 0 0 0

' Return

2. After the Network Function has acquired the network values, press the RETURN button. Then, run a Network Test to ensure the product has connected to your network (See page 42). 3. If the Network Function does not acquire the network values or you selected Manual, go to the directions for Manual Setup. Setting Up a Wired Connecton - Manual
If the Auto Setting does not work, youll need to set the Network Setting values manually. To get the Network setting values from most Windows computers, follow these steps:

Network Settings
Please contact your ISP to nd out if your IP address is static or dynamic. If it is dynamic, we recommend using the Auto setting. This is the easiest and will work in the majority of cases. If it is static, you must use the manual set up procedure. Directions for wired networks are below. Directions for wireless networks are after the directions for wired networks.

1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support tab, click the Details button. The Network settings are displayed.
To enter the Network settings into your product, follow these steps:

Wired Network
1. In the Network Settings menu, press the buttons to select Network Setting, and then press the ENTER button. The Internet Protocol Setup screen appears. 2. Press the button, then select Auto or Manual, and then press the ENTER button. Setting Up a Wired Connecton - Auto 1. If you selected Auto, the Network Function acquires and lls in the values for IP Address, Subnet Mask, etc., automatically.

1. On the Internet Protocol Setup screen, press the ENTER button. 2. Press the buttons to select Manual, and then press the ENTER button. 3. Press the button to go to the rst entry eld (IP Address).

NOTE

This process can take up to ve minutes.

English

39

Setup
Settings
Network Settings Display On-Screen Menu Internet Protocol Setup : Manual Audio Disc Menu 0 IP Address : 0 System Audio Subnet Mask : 255 255 Subtitle Network 0 Gateway : 0 Language DNS : Manual Security 0 DNS Server : 0 General Support
> Move " Select

2.
: : 0 : 255 :
0 \ 0 0 0 0

Press the RED (A) button on the remote control. Press the PBC (WPS) button on your router within two minutes. Your product displays the Network Selection Screen, and automatically acquires all the network setting values it needs and connects to your network. When it is done, it displays an OK button. Press the ENTER button on your remote. After the network connection is set up, press the RETURN button to exit the Network Setting screen.

3.

' Return

4. 5.

Use the number buttons on your remote to enter numbers. When done with each eld, use the button to move successively to the next eld. You can also use the other arrow buttons to move up, down, and back. Enter the IP Address, Subnet Mask, and Gateway values. Press the button to go to DNS. Press the button to go to the rst DNS entry eld. Enter the numbers as above. Press the RETURN button on your remote.

4.

Setting Up the Wireless Network Connection - Auto Network Search

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specied length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.

6. 7. 8. 9.

10. Run a Network Test to ensure the product has connected to your network (See page 42).

Wireless Network
You can setup the wireless connection three ways: Using PBC (WPS) Using the Auto Network Search function. Manually. Each method is described below. Setting Up the Wireless Network Connection - PBC (WPS)
The easiest way to set up the wireless network connection is using the PBC (WPS) function. If your wireless router has a PBC (WPS) button, follow these steps:

Setting Up the Network Connection

To set up the wireless connection using Auto Network Search, follow these steps:

1.

In the Network Settings menu, press the buttons to select Network Setting, and then press the ENTER button. The Internet Protocol Setup screen appears. Press the buttons to select the Internet Protocol Setup, and then press the ENTER button. Press the buttons to select Auto or Manual, and then press the ENTER button. If you selected Auto, press the button to go to Access Point Selection, and then press the ENTER button. The Network function searches for available wireless networks. When done, it displays a list of the available networks.

2.

3. 4.

1.

In the Network Settings menu, press the buttons to select Network Setting, and then press the ENTER button. The Internet Protocol Setup screen appears.

40

English

03 Setup

Settings
Display Audio System Network Language Security General Support Network Settings Network Selection
Connecting to network. Network Name(SSID) : shj Stop " Select ' Return

10. When done, press the YELLOW (C) button on your remote, or move to the Done button, and then press the ENTER button. The Network Connecting screen appears. 11. Wait until the connection conrmation message is displayed, and then press the ENTER button. The Network Settings screen reappears. 12. To test the connection, press the button to select Network Test, and then press the ENTER button. Setting Up the Wireless Network Connection - Manual
If the Auto Setting does not work, you need to enter the Network settng values manually. To get the Network setting values from most Windows computers, follow these steps:

5.

In the list of networks, press the buttons to select a network, and then press the ENTER button. If the PIN/Security pop-up appears, go to Step 7. If the Network Connecting Screen appears, go to Step 11. Press the buttons to select PIN or Security. For most home networks, you would select Security (for Security Key). On the Security screen, enter your networks Pass Phrase.

6.

7.

1. 2. 3. 4.

Right click the Network icon on the bottom right of the screen. In the pop-up menu, click Status. On the dialog that appears, click the Support tab. On the Support tab, click the Details button. The Network settings are displayed.

8.

NOTE

You should be able to nd the Pass Phrase

on one of the set up screens you used to set up your router or modem.

9.

To enter the Pass Phrase, follow these general directions: Press the number keys on your remote to enter numbers. Use the arrow keys on your remote to move from button to button on the Security Key screen. To enter letters, move to the button labeled a/A/1/, and then press the ENTER button. Each time you press the ENTER button, you change the kind of characters you can enter (a/A/1/). To enter a letter, press the number button that corresponds to the letter. Pressing the button repeatedly changes the letter. To delete the last letter or number you entered, move to the Delete button, and then press the ENTER button. To clear all entered letters and numbers, move to the Clear key, and then press the ENTER button. You can also just press the RED (A) button on your remote.

To Enter the Network settings into your product, follow these steps: 1. 2. 3. 4. On the Internet Protocol Setup screen, press the ENTER button. Press the buttons to select Manual, and then press the ENTER button. Press the button to go to the rst entry eld (IP Address). Use the number buttons to enter numbers.
Settings
Network Settings Display On-Screen Menu : Access Point Selection : Not Selected Audio Disc Menu : Internet Protocol Setup : Manual System Audio : 0 0 IP Address : 0 Network Subtitle : Subnet Mask : 255 255 255 Language 0 0 Gateway : 0 Security DNS : Manual General 0 0 DNS Server : 0 Support
a PBC (WPS) > Move \

0 0 0 0

" Select ' Return

English

41

Setup
5. When done with each eld, use the button to move successively to the next eld. You can also use the other arrow buttons to move up, down, and back. Enter the IP Address, Subnet Mask, and Gateway values. Press the to go to DNS. Press the button to go to the rst DNS entry eld. Enter the numbers as above. When done, press the button to return to Access Point Selection. Select the network, and then press the ENTER button.

BD-LIVE Internet Connection

Select whether to allow an Internet connection when BD-LIVE service is used. Allow (All) : The Internet connection will be allowed for all BD-LIVE contents. Allow (Valid Only) : The Internet connection will be allowed only for BD-LIVE contents containing a valid certicate. Prohibit : No Internet connection will be allowed for any BD-LIVE content.

6. 7. 8. 9.

NOTE

10. Go to Step 6 in the Automatic Wireless procedure above, and follow the directions from that point on.

What is a valid certicate?

When the product uses BD-LIVE to send the disc data and request to the server to certify the disc, the server uses the transferred data to check if the disc is valid and sends the certicate back to the product.

Network Test
Use this menu to connect the wired network or check whether your network connection is working or not.

The Internet connection may be restricted

while you are using BD-LIVE contents.

Network Status
Check whether a connection to the network and the Internet have been established.

Language
You can select the language you prefer for home menu, disc menu, etc. On-Screen Menu : Select the language for the on-screen displays. Disc Menu : Select the language for the disc menu displays. Audio : Select the language for disc audio. Subtitle : Select the language for disc subtitles.

NOTE

The selected language will only appear if it is

supported on the disc.

42

English

03 Setup

Security
When you operate this menu for the rst time, the password setup screen appears. Enter the desired 4-digit password using the number buttons. (Default password is set to 0000.)

General

Background
Change the background theme of the menu screen.
Settings
Display Audio System Network Language Security General Support Background Parental Rating : Off Change Password Skin 1
Skin 2 Skin 3 Skin 4 Skin 5 > Move s Select r Return

Parental Rating
This function works in conjunction with Blu-ray Disc/DVDs that have been assigned a rating, which helps you control the types of Blu-ray Disc/ DVDs that your family can watch. Select the rating level you want. A larger number indicates that the program is intended for adult use only. For example, if you select up to Level 6, discs rated at Level 7 or 8 will not play.
Settings
Display Audio System Network Language Security General Support Parental Rating Change Password
Off 8(Adults) 7 6 5 4

Energy Saving
You can reduce power consumption by setting the front panel to turn off automatically when there is no operation for 5 seconds. Off : Energy Saving function is off. On : The front panel will automatically turn off when there is no operation for 5 seconds.

Change Password
Change the 4-digit password used to access security functions.
Settings
Display Audio System Network Language Security General Support Change Password

Front Display
Change the brightness of the front panel. Auto : Dim during playback only. Dim : Dim the display window. Bright : Brighten the display window.

Power On/Off Sound

Play a melody when the product is turned on and off. Off : Turn Power Sound Off. On : Turn Power Sound On.

Enter the password

Enter Pin r Return

Light Effect
If you forgot your password
1. Remove the disc. 2. Press and hold the STOP () button on the front panel for 5 seconds or more. All settings will revert to the factory settings. You can activate or deactivate the light effect on the top of the product. Always On : Activate Light Effect at all times. Select this for retail display. Auto : Activate Light Effect when turning the product on and off or when moving the tray. Select when installing the product in your home. Off : Turn Light Effect off at all times.

NOTE

When the factory default settings are restored, all the

user data stored in the BD data will be deleted.

English

43

Setup
Support
You can update software two ways as follows: By Internet USB : Visit www.samsung.com/bluraysupport, then download and store the latest software (RUF le) onto a USB ash drive. Connect the USB ash drive to the USB port of the product (disc tray must be empty) to update the software, then follow the on-screen instructions. CD : Visit www.samsung.com/bluraysupport, download and write the latest software (RUF le) onto a disc. Insert and play the disc in the product to start the update, then follow the onscreen instructions.

Software Upgrade
This menu allows you to upgrade software for performance improvements or additional services. You can check the current software version, upgrade on the Internet and set the Auto upgrade notication. If the product is properly connected to the network by cable or wirelessly, the product will automatically connect to our website each time it is turned on and download update les if any valid upgrade exists.
Settings
Display Software Upgrade Software Upgrade : Disc Menu Audio : System Current Version Audio : XXX-XXXXXXXXX Network Subtitle : By Internet | Language Auto Upgrade Notication : On Security General s Select r Return Support

NOTE

Software upgrades using the USB Host jack

must be performed with no disc inside.

The USB and CD software updates work the

same as the By Internet update once the update begins.

If you want to cancel the upgrade in the

1. To select By Internet, press the ENTER button. A popup message appears if an update is available asking if you want to upgrade. 2. If you select Yes, the product turns off automatically before restarting, and then begins the upgrade. (Never turn it on manually here.) 3. The update progress popup appears. When the update is completed, the product turns off automatically again. 4. Press the POWER button to turn on the product. process of downloading the upgrade data, press the ENTER button.

When the system upgrade is done, check the

software details in the software Upgrade menu.

Do not turn off the product during the System

Upgrade. It may cause the product to not work properly.

Do not use USB devices other than USB Flash

Drives to do software upgrades when using the USB Host jack.

Contact Samsung
Provides contact information for assistance with your product.

NOTE

The Update is complete when the product turns

off after restarting. Press the POWER button to turn on the updated product for your use. Never turn the product off or on manually during the update process. Samsung Electronics shall take no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during software upgrade.

44

English

Basic Functions
Playing a Disc

04 Basic Functions

Disc Structure
The contents of disc are usually divided as below. Blu-ray Disc, DVD-VIDEO
title 1 chapter 1 chapter 2 chapter 1 title 2 chapter 2 chapter 3

Playback
1. Press the OPEN/CLOSE ( ) button to open the disc tray. 2. Place a disc gently into the tray with the discs label facing up. 3. Press the PLAY () button or OPEN/ CLOSE ( ) button to close the disc tray.

Audio CD (CD-DA)
track 1 track 2 track 3 track 4 track 5

Playback related buttons

PLAY ( )

MP3, WMA, DivX, MKV and MP4

folder (group) 1 le 1 le 2 le 1 folder (group) 2 le 2 le 3

Starts playback. Stops playback. If you press the button once: The stop position will be memorized. If you press the button twice: The stop position will be not memorized. With some Blu-ray discs (BD-J), this function may not work.

Using the Disc menu / Title menu / Popup menu

Using the Disc Menu

STOP ( )

hZ
1. During playback, press the DISC MENU button on the remote control. 2. Press the buttons to make the desired selection, then press the ENTER button.
DISC MENU

PAUSE ( )

Pauses playback.

NOTE

NOTE

"Not Available" will appear when an invalid

button is pressed.

Depending on the disc, the menu items may

differ and this menu may not be available.

English

45

Basic Functions
Using the Title Menu
Using the Search and Skip Functions

Z
1. During playback, press the TITLE MENU button on the remote control. 2. Press the buttons to make the desired selection, then press the ENTER button.
TITLE MENU POPUP

During playback, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.

Searching for a Desired Scene

hzZyx
During playback, press the SEARCH () button. Each time you press the SEARCH () button, the playback speed will change as follows.
BD-ROM, BD-RE/-R, DVD-RW/-R, DVD+RW/+R, DVD-VIDEO DivX, MKV, MP4 )1)2)3 )4)5)6)7 (1(2(3 (4(5(6(7 )1)2)3 (1(2(3

NOTE

Depending on the disc, the menu items may

differ and this menu may not be available.

The Title Menu will only be displayed if there

are at least two titles on the disc.

Playing the Title List

z
1. During playback, press the DISC MENU or TITLE MENU button. 2. Press the buttons to select an entry you want to play from Title List, then press the ENTER button.
DISC MENU

TITLE MENU POPUP

To return to normal speed playback, press the PLAY () button.

NOTE

Using the Popup Menu

No sound is played in search mode.

h
1. During playback, press the POPUP button on the remote control. 2. Press the buttons or ENTER button to select the desired menu.
TITLE MENU POPUP

Skipping Chapters

hzZyx
During playback, press the SKIP (#$) button. If you press the SKIP ($) button, the disc moves to the next chapter. If you press the SKIP (#) button, the disc moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter.

NOTE

Depending on the disc, the menu items may

differ and this menu may not be available.

46

English

04 Basic Functions

Slow Motion Play/Step Motion Play

Repeat Off

Slow Motion Play

hzZyx
In pause mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 To return to normal speed playback, press the PLAY ( ) button.

3. To return to normal play, press the REPEAT button again. 4. Press the buttons to select Off, then press the ENTER button.

NOTE

Depending on the disc, the Repeat function

may not be available.

NOTE

Repeat the Section

No sound is played in slow mode. Slow motion operates only in the forward
direction.

hzZy
1. During playback, press the REPEAT button on the remote control. 2. Press the buttons to select REPEAT A-B.
Repeat REPEAT A-B : Off

REPEAT

Step Motion Play

hzZyx
In pause mode, press the PAUSE ( ) button. Each time you press the PAUSE ( ) button, a new frame appears. To return to normal speed playback, press the PLAY ( ) button.

s Mark A

NOTE

No sound is played in step mode. Step motion operates only in the forward
direction.

3. Press the ENTER button at the point where you want repeat play to start (A). 4. Press the ENTER button at the point where you want repeat play to stop (B). 5. To return to normal play, press the REPEAT button again. 6. Press the ENTER button.

Repeat Playback

Repeat the Title or Chapter

NOTE

hzZy
Repeat the disc title or chapter.
1. During playback, press the REPEAT button on the remote control. 2. Press the buttons to select Chapter or Title, then press the ENTER button.
REPEAT

If you set point (B) before 5 seconds has

elapsed, the prohibition message will appear.

English

47

Basic Functions
Using the TOOLS button
During playback, you can operate the disc menu by pressing the TOOLS button. TOOLS Menu Screen
Tools
Title : 1/1 Chapter 4/21 Playing Time : 00:12:06 Repeat Audio : 1/7 ENG Multi CH Subtitle : 1/6 ENG Angle : 1/1 BONUSVIEW Video : Off BONUSVIEW Audio : 0/1 Off Picture Setting < Change " Select

Information about the primary / secondary

TOOLS

mode is also displayed if the Blu-ray Disc has a BONUSVIEW section. Use the button to switch between primary and secondary audio modes. This function depends on what audio languages are encoded on the disc and may not be available. A Blu-ray Disc can contain up to 32 audio languages and a DVD up to 8. Some Blu-ray Discs may allow you to select either the multi-channel LPCM or Dolby digital audio soundtrack in English.

Selecting the Subtitle Language

NOTE Depending on the disc, the TOOLS menu may

differ.

hZx
1. During playback, press the TOOLS button. 2. Press the buttons to select Subtitle. 3. Press the buttons to select the desired subtitle language.

Moving to a Desired Scene Directly

hzZy NOTE
Depending on the Blu-ray Disc / DVD, you may
1. During playback, press the TOOLS button. 2. Press the buttons to select Title, Chapter or Playing Time. 3. Enter the desired Title, Chapter or Playing Time using the number buttons, then press the ENTER button. be able to change the desired subtitle in the Disc Menu. Press the DISC MENU button. This function depends on what subtitles are encoded on the disc and may not be available on all Blu-ray Discs/DVDs. A Blu-ray Disc can contain up to 255 subtitle languages and a DVD up to 32. Information about the primary / secondary mode is also displayed if the Blu-ray Disc has a BONUSVIEW section. This function changes both the primary and secondary subtitles at the same time. The total number of subtitles is the sum of the primary and secondary ones.

Selecting the Audio Language

hzZx
1. During playback, press the TOOLS button. 2. Press the buttons to select Audio. 3. Press the ENTER button. 4. Press the buttons to select the audio language you want.

NOTE

The indicator is not displayed on the

screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings.

48

English

04 Basic Functions

Caption Function

x
You must have some experience with video extraction and editing in order to use this feature properly. To use the caption function, save the caption le (*.smi) in the same le name as that of the DivX media f le (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi You can use up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the le name.

User : The user can adjust the sharpness and noise reduction function respectively.

Setting the BONUSVIEW

h
The BONUSVIEW feature allows you to view additional content (such as commentaries) in a small screen window while the movie is playing. This function is only available if the disc has the bonusview feature.

Changing the Camera Angle

hZ
When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the ANGLE function. 1. During playback, press the TOOLS button. 2. Press the buttons to select Angle. 3. Press the buttons to select the desired angle. 1. During playback, press the TOOLS button. 2. Press the buttons to select BONUSVIEW Video or BONUSVIEW Audio. 3. Press the buttons to select the desired bonusview.
Primary a audio/video Secondary a audio/video

Selecting the Picture Setting

hzZy NOTE
This function lets you to adjust video quality when the home theater is connected to a TV via HDMI. 1. During playback, press the TOOLS button. 2. Press the buttons to select Picture Setting, then press the ENTER button. 3. Press the buttons to select the desired Picture Setting, then press the ENTER button. Dynamic : Choose this setting to increase Sharpness. Normal : Choose this setting for most viewing applications. Movie : This is the best setting for watching movies.

If you switch from BONUSVIEW Video,

BONUSVIEW Audio will change automatically in accordance with BONUSVIEW Video.
Tools
BONUSVIEW Video BONUSVIEW Audio : Picture Setting < Change " Select Off 0/1 Off

English

49

Basic Functions
Listening to Music
9 STOP button : Stops a track. SKIP($) button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. SKIP (#)button : During playback, moves to the previous page in the Music List or moves to the previous track in the Playlist. If you press this button after three seconds of playback in the Playlist, the current track will be replayed from the beginning. But, if you press this button within three seconds after playback starts in the Playlist, the previous track will be played. NUMBER button : During the Playlist playback, press the desired track number. The selected track will be played.

ow
Buttons on the Remote Control used for Music Playback
1 4
@ ! 0 9 8 7
TOOLS INFO

2 5 8 0

3 6 9
REPEAT

7
FULL SCREEN

1 2
@

3 4

Playing an Audio CD (CD-DA)/MP3

5
1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray. Audio CDs (CD-DA) play automatically. To start an MP3 disc, press the buttons to select Music, then press the ENTER button.

RETURN TUNER MEMORY

EXIT

MO/ST

A
INTERNET@

D
DSP

Audio CD (CD-DA)/MP3 Screen Elements

1 2 3 4 5 6 7 8 REPEAT buttons : Selects the play mode in the Playlist. SEARCH buttons : Fast Play. (Audio CD (CD-DA) only) PAUSE button : Pauses playback. PLAY button : Plays the currently selected track. buttons : Selects a track in the Music List or Playlist. YELLOW(C) button : Select or deselect a track in the music list. ENTER button : Plays and pauses the selected track. buttons : Fast Play. (except for Audio CD (CD-DA))

1
TRACK 001

2
Playlist TRACK 001

3
1/12
05:57

TRACK 002
04:27

TRACK 003

7 6

04:07

TRACK 004 +
03:41

00:08 / 05:57

TRACK 005
03:17

TRACK 006
03:35

s Pause

Tools

r Return

50

English

04 Basic Functions

1 2 3 4 5 6 7

Displays the music information. Displays the playlist. Shows the current track/total tracks. Displays control buttons available. Shows the current play time/total play time. Displays the current playback status. Displays the repeated playback status.

2. To move to the Music List, press the STOP () or RETURN button. The Music List screen appears. 3. Press the buttons to move to the desired track, then press the YELLOW (C) button to check desired tracks. Repeat this procedure to select additional tracks.
Music
TRACK 003 3 les selected 1/2 Page

TRACK 001
00:05:57

TRACK 002
00:04:27

TRACK 003
00:04:07

TRACK 004
00:03:41

TRACK 005
00:03:17

TRACK 006
00:03:35

TRACK 007
00:03:47

TRACK 008
00:03:49

2. Press the buttons to select the track you want to play, and then press the ENTER button.

TRACK 009
00:03:53

TRACK 010
00:03:45

CDDA

c Select

Jump page

r Return

Repeat an Audio CD (CD-DA)/MP3

1. During the Playlist playback, press the REPEAT button. 2. Select the desired play mode by pressing the REPEAT button repeatedly.
Tracks on a disc are played Audio CD in the order in which they (CD-DA)/MP3 were recorded on the disc. Audio CD (CD-DA) MP3 Current track is repeated. Current track is repeated.
REPEAT

4. If there is an undesired track in the playlist, press the YELLOW (C) button again. The selected track will be deleted. 5. Press the ENTER button to play the selected tracks. The selected track play automatically.
Playlist TRACK 001
TRACK 001 TRACK 002 TRACK 003 1/1
05:57 04:27 04:07

Off

( ( (

) Track ) One ) All

00:08 / 05:57

Audio CD All tracks are repeated. (CD-DA)/MP3 The random option plays Audio CD a disc's tracks in random (CD-DA)/MP3 order.

s Pause

Tools

r Return

) Shufe

6. To go to the Music List, press the STOP () or RETURN button. 7. To go to the Playlist, press the ENTER button.

Playlist
1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray. Audio CDs (CD-DA) play automatically. To start an MP3 disc, press the buttons to select Music, then press the ENTER button.

NOTE

You can create a playlist with up to 99 tracks

on Audio CD (CD-DA).

English

51

Basic Functions
Sound Mode

Dolby Pro Logic II Mode

You can select the desired Dolby Pro Logic II audio mode. Press the PL II button.

DSP (Digital Signal Processor) Function

DSP regulates the volume level and decreases drastic volume changes when you change channels or during a scene transitions. Press the DSP button. SMART SOUND MP3 ENHANCER POWER BASS DSP MODE OFF SMART SOUND : Regulates the volume level and deceases drastic volume changes when you change channels or during a scene transition. MP3 ENHANCER : This also helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound (24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit). POWER BASS : This function stresses low tones providing deep, powerful sound effects.
DSP

Setting the speakers with DPL IIz

1. Set the DPL IIz of speaker settings to On. (For further details, refer to page 34.) 2. Press the PL II button of the remote control until "DPL IIz or DPL IIz OFF appears on the display. Set to DPL IIz to enable sound reproduction from front center/height speakers. You can listen to a 2CH sound source in 7.1CH surround sound with all speakers active. - A specic speaker(s) may not be output depending on the input signal. Select this option to listen through the front left/ right speakers and the subwoofer only.

DPLIIz DPLIIz OFF

Setting the speakers with DPL IIx

1. Set the DPL IIz of speaker settings to Off. (For further details, refer to pages 34.)

SFE (Sound Field Effect) MODE

You can set the SFE mode best suited for the type of music you are listening to. Press the SFE MODE button. HALL1 Provides a clear vocal as if listening in a concert hall. Also provides a clear vocal as if listening in a concert hall but, less powerful than HALL1. Recommended setting for Jazz. Gives the feel of being in a grand church. Recommended setting for Rock. Select this for normal listening.
SFE MODE

2. Press the PL II button of the remote control until the desired setting is displayed. Once selected with the desired mode, sound will be heard through the rear speakers. When listening to music, you can experience sound effects as if you are listening to the actual performance. Adds realism to the movie soundtrack. You can listen to a 2CH sound source in 7.1CH surround sound with all speakers active. - A specic speaker(s) may not be output depending on the input signal. You will hear multi channel surround sound. Select this to listen to sound from the front left and right speakers and the subwoofer only.

MUSIC MOVIE PROLOG MATRIX STEREO

HALL2

JAZZ CHURCH ROCK SFE OFF

52

English

04

NOTE

Basic Functions

The Dolby Prologic II is not available for sound

Using the TOOLS button

During the slide show playback, you can use various function by pressing the TOOLS button.
TOOLS

For 2 channel audio CD/MP3 playback, wireless

source encoded in 7.1 CH format or HD sound.

receiver does not produce sound (for rear and front center/height speakers). For sound source of DVD 5.1 CH, BD 5.1/7.1 CH, the wireless receiver produces sound (for rear and front center/height speakers) regardless of the sound settings. For 2 channel audio CD/MP3/TV broadcast, set the Dolby Prologic to ON to make wireless receiver produce sound (for rear and front center/height speakers). When selecting Dolby Pro Logic II mode, connect your external device to the AUDIO INPUT jacks (L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround sound.

Tools
Stop Slide Show Slide Show Speed : Background Music Zoom Rotate Information Normal

> Move

" Enter

' Return

Playing back a Picture

G
Playing a JPEG Disc
1. Insert a JPEG disc into the disc tray. 2. Press the buttons to select Photos, and then press the ENTER button. 3. Press the buttons to select the folder you want to play, and then press the ENTER button. 4. Press the buttons to select the photo you want to play, and then press the ENTER button.

Stop Slide Show : Select this if you want to stop the slide show. Slide Show Speed : Select if you want to adjust the Slide Show speed. Background Music : Select if you want to listen to music while viewing a picture. Zoom : Select if you want to enlarge the current picture. (Enlarged up to 4 times) Rotate : Select if you want to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.) Information : Shows the picture information including the name and size, etc.

NOTE

NOTE

To enable the Background Music function,

You can't enlarge the subtitle and PG graphic

in the full screen mode.

both music and MP3 les must be contained in the same folder. However, the sound quality can be affected by the bit rate of the MP3 le, the size of the photo, and the encoding method.

English

53

Basic Functions
Playing Back a USB Storage Device

NOTE

F
You can use the USB connection to play multimedia les (MP3, JPEG, DivX, etc.) downloaded from a USB storage device. 1. Move to the Home menu. 2. In Stop mode, connect the USB storage device to the USB port on the front panel of the product. The message Do you want to access the device? appears. 3. Press the button to select Yes, then press the ENTER button. 4. Press the RED (A) button or the BLUE (D) button. If you pressed the RED (A) button, go to Step 5. If you pressed the BLUE (D) button, go to Step 4-1>
You Tube internet radio service Please activate Internet@TV to enjoy a variety of Internet Services.

You must remove the USB storage device

safely by performing the Safe to Remove Hardware function to prevent possible damage to the USB memory. Press the MENU button to move to the main screen, press the YELLOW (C) button, and then press the ENTER button. When the Audio-CD (CD-DA), MP3, or JPEG les are in stop mode, you can't see the full screen by pressing the FULL SCREEN button on the remote control. If you insert a disc when playing a USB storage device, the device mode is changed to DVD or CD automatically. To listen to your music les with 7.1 channel sound, you must set the Dolby Pro Logic ll mode to Matrix. (See page 52)

Listening to Radio Using buttons on the Remote Control

CD USB
USB a Change Device c Safely Remove USB d View Devices " Enter

1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. Automatic Tuning 1 : When the # $ button is pressed, a preset broadcast station is selected. Automatic Tuning 2 : Press and hold the ) button to search for active TUNING/CH ( broadcasting stations automatically. Manual Tuning : Press the TUNING/CH ) button to increase or decrease the ( frequency incrementally.

5.

Press the buttons to select USB, then press the ENTER button. 6. Press the buttons to select the desired Videos, Music or Photos, then press the ENTER button. Go to Step 7. 4-1. Press the BLUE (D) button, the screen below appears. Go to 5-1.
Please activate Internet@TV service to enjoy a variety of Internet Services.

Using the buttons on the home theater

1. Press the FUNCTION ( ) button to select FM.

USB

2. Select a broadcast station. Automatic Tuning 1 : Press the STOP ( I ) button to select PRESET and then press the # $ button to select the preset station. Automatic Tuning 2 : Press the STOP ( I ) button to select MANUAL and then press and hold the # $ button search the band automatically Manual Tuning : Press the STOP ( I ) button to select MANUAL and then press the # $ button to tune in to a lower or higher frequency.

USB

d Home

" Enter

5-1. Press the buttons to select USB, then press the ENTER button. 6-1. Press the buttons to select the desired Videos, Music or Photos, then press the ENTER button. 7. For playing back Video, Music or Photo les, refer to pages 45~53.

54

English

04 Basic Functions

Setting Mono/Stereo
MO/ST Press the MO/ST button. D Each time the button is pressed, the sound switches between STEREO and MONO. In a poor reception area, select MONO for a clear, interference-free reception.

Using an iPod
You can enjoy music and video les from an iPod through the product.
iPod

iPod

Presetting Stations
Example : Presetting FM 89.10 into memory 1. Press the FUNCTION button to select FM. ) button to select 2. Press the TUNING/CH ( <89.10>. 3. Press the TUNER MEMORY button. TUNER MEMORY NUMBER ashes on the display. C 4. Press the # $ button to select preset number. You can select between 1 and 15 presets. 5. Press the TUNER MEMORY button again. Press the TUNER MEMORY button before NUMBER disappears from the display. NUMBER disappears from the display and the station is stored in memory. 6. To preset another station, repeat steps 2 to 5. To tune in to a preset station, press the # $ button on the remote control to select a channel.

Listening to Music
You can play music les stored in the iPod player by connecting it to the product.

Please activate Internet@TV service You You Tube Tube internet radio to enjoy a variety of Internet Services.

No disc
MEMU

iPod iPod No Disc

a Change Device d View Devices s Enter

Simple Playback of Internet Radio (Pandora)

Simple Playback is an extended feature of Pandora. It offers easy access to Pandora QuickMix. You do not need to turn the TV on to enjoy this feature. 1. Turn on the product. 2. Press the FUNCTION button to select the ONLINE mode. You can use the remote control or the product to control simple playback functions such as the PLAY, PAUSE and $ buttons. 1. Connect the iPod dock connector to the iPod jack on the rear panel of the product. 2. Place the iPod in the supplied iPod Dock. Your iPod is automatically turned on. iPod message appears on the TV screen. 3. Press the RED (A) button. 4. Press the buttons to select iPod, then press the ENTER button. 5. Press the buttons to select Music, then press the ENTER button. 6. Select the music le to play. - You can use the remote control or product to control simple playback functions such as the PLAY, PAUSE, STOP, #/ $, / and REPEAT buttons. See page 16.

NOTE

Once entered, Simple Playback is limited to

VFD display only. The TV will not display anything while this feature is active. Network connection and Pandora activation are also required prior to accessing.

English

55

Basic Functions
NOTE
Adjust the volume to a moderate level before you When the product is powered on and you connect Make sure to connect the dock connector so that Made for iPod means that an electronic accessory
the label SAMSUNG faces upward. has been designed to connect specically to the iPod and has been certied by the developer to meet Apple performance standards. Works with iPhone means that an electronic accessory has been designed to connect specically to an iPhone and has been certied by the developer to meet Apple performance standards. an iPod, the product charges your iPod's battery. connect your iPod and product. 3. Place the iPod in the supplied iPod Dock. iPod message appears on the TV screen. 4. Press the RED (A) button. 5. Press the buttons to select iPod, then press the ENTER button. 6. Press the buttons to select Videos, then press the ENTER button. 7. Select the video le to play. - You can use the remote control or the product to control simple playback functions such as the PLAY, PAUSE, STOP, # /$ and / buttons. (See page 16.)

iPod/iPhone models that can be used with this product

iPod touch (3rd generation) iPod touch (2nd generation) iPod touch (1st generation) iPod classic iPod with video iPod with dock connector iPod with Click Wheel iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation)

iPod Music categories

File information including the artist name, album name, music title and genre is displayed according to the ID3 Tag information on each music le.
Now Playing Artist Songs Playlist Album Generic Composers

Plays a recently played le or moves to the playback screen of the current le. To play by artist. To play in numeric or alphabetical order To play by Playlist. To play by album. To play by genre. To play by composer.

NOTE

iPhone 3GS iPhone 3G iPhone

The category list may differ, depending on the

iPod model. What is an ID3 Tag? This is what is attached to an MP3 to carry information relevant to the le such as the title, artist, album, year, genre and a comment eld.

NOTE

You must have the VIDEO output (Composite)

connected to your TV to view iPod video (See page 25). If you want to view an iPod video via VIDEO output, set Anynet+ (HDMI-CEC) to off. No other screen than the playback screen appears on the TV screen. View other iPod screens on the iPod player. If the connected iPod does not support video playback, the Cannot play video les saved on this iPod message appears when you select the Video menu. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Watching a Movie
You can play video les stored in the iPod player by connecting it to the product. 1. Connect the iPod dock connector to the iPod jack on the rear panel of the product. 2. In the iPod screen, move to Settings > Videos, then set the TV Out option and the TV signal.

56

English

Network Services
You can enjoy various network services such as Internet@TV or BD-LIVE by connecting the product to the network system. Check the following instructions before using any network service. 1. Connect the product to the network. (see pages 27~28) 2. Congure the network settings. (see pages 39~42) 4. When you have signed off on the service agreement, the Internet@TV service starts updating. It takes several minutes. When the update is complete, you will see the Internet@TV menu screen.

05 Network Services

Internet@TV at a Glance
1 2
Recommended
Contents 1 Contents 2 Contents 3 Contents 4

Using Internet@TV
Connect this product to the network to download various for a fee or free-of-charge applications. Internet@TV brings useful and entertaining content and services directly from the web to your product such as news, weather forecast, stock market, games, movies, and music.
INTERNET@

My Applications
Contents 1 Contents 2 Contents 3

by Date 1/3

Samsung AppS Settings

a Login b Mark as Favorite d Sort by ' Return

You can also operate this function by pressing the INTERNET@ button on the remote control.

Commercial : Displays Internet@TV Guide, product introduction and new application introduction. Recommended : Displays recommended contents managed by Samsung. My Application : Displays your personal gallery in which you can add and delete applications. Navigation Help : Displays the remote control buttons available. RED (A) : To log in to to Internet@TV. GREEN (B) : To mark the application as a favorite. BLUE (D) : To sort the applications. Return : To return to the previous menu. Settings : You can set up the system and create accounts, etc. Samsung AppS : You can download various for a fee or free-of-charge application services.

Getting Started with Internet@TV

1. Move to the home menu.

2 3

You Tube internet radio service Please activate Internet@TV to enjoy a variety of Internet Services.

No Disc

a Change Device

d View Devices

" Enter

2. Press the buttons to select Internet@ TV and press the ENTER button. 3. In the start screen of the Internet@TV service, you will see the service agreement screen. You must agree to the service terms and conditions before you can use the Internet@ TV service.

English

57

Network Services
Using the On-Screen Keypad
Through your remote, you can use the OnScreen Keypad in several Internet@TV applications to enter text. Pressing the FULL SCREEN button on the remote while you are using the Screen Keypad lets you change the text elds to lower case, upper case, numbers, and icons.
1 4 7
ghi pqrs

13. Press the ENTER button. 14. The map and address appear on the screen.

NOTE

Samsung Electronics shall take no legal

responsibility for any interruption of the Internet@TV service caused by the service provider for any reasons.

The Internet@TV service is to download and

2 5 8 0
a A abc jkl tuv

3 6 9

def mno wxyz Delete

Input Mode

process data via the Internet so that you can enjoy the contents on the TV screen. If the Internet connection is unstable, the service may be delayed or interrupted. Furthermore, the product may be turned off automatically. If this is the case, check the Internet connection and try again.

For example, here is how to use the Keypad to search for an address in Google Maps: 1. 2. 3. 4. 5. 6. Press the ENTER button on the remote at the Google Maps icon at the Internet@TV. Press the GREEN (B) button to use the SEARCH function. Press the buttons to move to the "Search or address" window. Press the ENTER button to use the Search or address function. Let's say that you want to input 105 Challenger Rd., Ridgeeld Park NJ. Press the FULL SCREEN button on the remote twice to change the input mode from lower case to numbers. Press 1, 0, 5. Press the YELLOW (C) button on the remote to input a blank space. Press the FULL SCREEN button on the remote 3 times to change the input mode from numbers to upper case.

The application service may be provided in

English only and the contents available may vary, depending on the area.

For more information about the Internet@TV

service, visit the web site of the applicable service provider.

The services provided are subject to change,

depending on the Internet@TV service provider.

The Internet@TV service contents may differ

according to the rmware version.

Pay to play DivX contents with copy protection

can only be played using HDMI cable. If you connect your player to your TV using Component or video cables, the video signal will not output or the popup message" cannot play current le" appears.

7. 8. 9.

10. Press 2 button on the remote 3 times to input C. 11. Press the FULL SCREEN button on the remote 3 times to change the input mode from upper case to lower case. 12. Press buttons on the remote to input the rest of Challenger Rd., Ridgeeld Park NJ.

58

English

05 Network Services

Account Login
For a more enjoyable application experience, register and log in to your account. To do this, you must create an account rst. (For instructions on creating an account, refer to Internet@TV ID on this page) 1. Press the buttons to select the desired application and press the RED (A) button.
Login

System Setup
Reset Resets Internet@TV settings to factory default settings.

NOTE

If you forgot your password, press the STOP

() button on the front panel of the product for more than 5 seconds with no disc inserted.

Internet@TV ID
User Account : Password : admin

Use this menu to create or delete an account and enter or delete account information. You can control your account including the content sites account information.

a Create

[0~9] Enter PIN ' Cancel

This account is only for Internet@TV. Create

2.

Enter the user account and password.

Create an account and link it with desired service applications.

Settings
Create IDs and congure Internet@TV settings on this screen.
Settings
System setup Internet@TV ID Service Manager Properties Change the Service Lock password Reset

NOTE

The account name must be at least 1

character in length but no more than 8.

You can register up to 10 User Account

Names. Manager Service Site : Register login information for service sites. Change Password : Change account password. Delete : Delete the account.

' Cancel

English

59

Network Services
Service Manager
Delete and lock applications installed in Internet@ TV. Lock Lock the application. Accessing a locked application requires a password. Delete Delete the application. Using the color buttons with the Samsung Apps RED (A) (Login) : To log in to the internet service. GREEN (B) (Thumbnail View) : To change the view mode. BLUE (D) (Sort By) : To sort the applications by Featured, Most Downloaded, Most Recent or Name.

Internet@TV Services Available

YouTube/Pandora/Netix/Blockbuster/USA Today News - Blockbuster : You can view movies streamed by Bloxckbuster. - YouTube : You can view video streamed by YouTube. - Netix : You can view movies streamed by Netix. - Pandora : You can listen to Internet radio. - USA Today News : You can read news streamed by USA Today News. - AccuWeather : You can view weather information by AccuWeather. - Google Maps : You can view maps by Google Maps and search for locations.

Properties
Display information about Internet@TV. Use the "Check the speed of your internet connection" option to test your network connection.

Samsung AppS
Various applications are available from here, organized into different categories. Some applications have a download fee.
Samsung AppS
What's New! Video Sports Lifestyle Games Infomation Other

Video
Featured Most downloaded Most recent

1/1
Name

YouTube
TV store Test User002

Free

NOTE
a Login b Thumbnail View d Sort By

The available Internet contents services may

be added or deleted.

My Applications Help
' Return

My Application Displays the application list. Help If you questions about Internet@TV, check this section rst. If none of the tips apply, please visit the help website.

60

English

05 Network Services

BD-LIVE
Once the product is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc. 1. Check the size of the remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services. 2. Insert a Blu-ray disc that supports BD-LIVE. 3. Select an item from various BD-LIVE service contents provided by the disc manufacturer.

Using the AllShare Function

AllSharelets lets you play music, video and photo les in your PC using the product. To use AllShare, you must connect the product to your PC via the network (See pages 27~28) and install the SAMSUNG PC Share Manager on the PC. To install Share Manager, follow these steps. 1. Visit the Samsung website at www.samsung. com. 2. Download the SAMSUNG PC Share Manager and install it on the PC. 3. When the installation is completed, you will see the SAMSUNG PC Share Manager icon on your desktop. Double-click the icon to launch the application.

NOTE

The way you use BD-LIVE and the provided

contents may differ, depending on the disc manufacturer.

Application Program at a Glance 1

SAMSUNG PC Share Manager File Share Server Help Server : PC Share Manager Shared Folder Folder Folder 1 Full Path C: Document and settin..

Software Upgrade Notication

When connected to the network, the product can notify you of any new software version with a popup message. 1. Turn on the product. 2. In the Software Upgrade menu, set Auto Upgrade Notication to On. (See page 44) If there is a new software version available, the product noties you with a popup message. 3. To upgrade the rmware, select Yes on the pop-up. The product turns off automatically, then restarts, and begins the download. (Never turn it on manually.) 4. The update progress popup appears. When the update is completed, the product turns off again automatically. 5. Press the POWER button to turn on the product.

My Computer

2345
C: Document and settings Admin Name Folder 1 Folder 2 Folder 3 Size Kind File File File

8
1 2 3 4 5 6 7 8 Menu Bar

Share Folder Enabled icon : Use this if you want to select a folder in your PC to share. Share Folder Disabled icon : Use this if you want to set folder sharing off. Refresh icon : Use this if you want to refresh list of folders and les in My Computer. Update icon : Select a folder to share and dont forget to press this button. The updated state will be applied to the server. Server : Displays the name of the sharing server. Shared Folder : Displays a list of the shared folders. My Computer : Displays a list of the folders and les in the PC.

NOTE

Update is complete when the product turns off

after downloading and then restarting. Press the POWER button to turn on the updated product for your use. Never turn the product off or on manually during the update process. Samsung Electronics shall take no legal responsibility for product malfunction caused by unstable of internet connection or consumer negligence during software upgrade.

English

61

Network Services
4. Select a folder to share from the My computer pane, and click the Share Folder Enabled icon ( ). (To remove a shared folder : Select a folder to remove from the shared folders, and click the Share Folder Disabled icon ( ).) 5. To apply the updated sharing state to the server, click the Set Change State icon ( ).

AllShare does not support the following

functions.
- The Background Music and Background Music Setting functions. - Sorting les by preference in the Photo, Music, and Movie folders. - The Change Group function. - The Safe Remove function.

6. To enable the product to locate a PC server, click Share from the menu bar. Click Set Device Policy and click Accept.
SAMSUNG PC Share Manager File Share Server Help Server : PC Share Manager Set Device Policy My Computer C: Document and settings Admin IP Device Name Size Kind SAMSUNG Blu-ray Disc Player XXX.XXX.X.XX Folder 1 File Folder 2 Folder 3 File File OK Cancel Shared Folder Folder State Folder 1 Deny Delete Selected Item Full Path Set State C: Document and settin.. Accept

The Sorting method may differ depending on

the server function.

The search and skip operation may differ

depending on the server function.

During video playback, play time is not

displayed.

To use the AllShare function, please place both

this product and the PC in the same subnet.

7. Click the Set Change State icon ( ) and move to the home menu on the product. 8. To select a device, use the RED (A) or BLUE (D) button to select a le to play. (For playing back Video, Music or Photos les, see pages 45~53.)

You Tube internet radio service Please activate Internet@TV to enjoy a variety of Internet Services.

No Disc

a Change Device

d View Devices

" Enter

NOTE

Depending on the performance of the external

modem or router, HD video may not play properly.

If your system uses a rewall, the product may

not locate your PC on the TV screen.

62

English

Other information
Troubleshooting
Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG.

06 Other information

Symptom
I cannot eject the disc. Playback does not start.

Check/Remedy
Is the power cord plugged securely into the outlet? Turn off the power and then turn it back on. Check the region number of the BD/DVD. BD/DVD discs purchased from abroad may not be playable. CD-ROMs and DVD-ROMs cannot be played on this Product. Make sure that the rating level is correct. Are you using a deformed disc or a disc with scratches on the surface? Wipe the disc clean. No sound is heard during fast playback, slow playback, and step motion playback. Are the speakers connected properly? Is the speaker setup correctly customized? Is the disc severely damaged? On certain BD/DVD discs, sound is output from the front speakers only. Check if the speakers are connected properly. Adjust the volume. When listening to a CD, radio or TV, sound is output to the front speakers only. Select "PRO LOGIC II" by pressing PL II (Dolby Pro Logic II) on the remote control to use all six speakers. Is there "Dolby Digital 7.1 CH" mark on the disc? Dolby Digital 7.1 CH Surround Sound is produced only if the disc is recorded with 7.1 channel sound. Is the audio language correctly set to Dolby Digital 7.1-CH in the information display? Is the remote control being operated within its operational angle and distance ranges? Are the batteries drained? Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly? Is the TV power on? Are the video cables connected properly? Is the disc dirty or damaged? A poorly manufactured disc may not be playable. Audio language and subtitles will not work if the disc does not contain them. Are you using a disc that does not contain menus?

Playback does not start immediately when the Play/Pause button is pressed. Sound is not produced.

Sound can be heard only from a few speakers and not all 8.

Dolby Digital 7.1 CH Surround Sound is not produced.

The remote control does not work.

Disc is rotating but no picture is produced. Picture quality is poor and picture is shaking. Audio language and subtitles do not work. Menu screen does not appear even when the menu function is selected.

English

63

Other information
Symptom
Aspect ratio cannot be changed.

Check/Remedy
You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. Turn off the power, and press and hold the STOP ( I ) button on the product for longer than 5 seconds. - Using the RESET function will erase all stored settings. Do not use this unless necessary. With no disc in the product, press and hold the product's STOP ( I ) button for longer than 5 seconds. INIT appears on the display and all settings will return to the default values. And then press the POWER button. - Using the RESET function will erase all stored settings. Do not use this unless necessary.

The product is not working. (Example: The power goes out or a strange noise is heard.) The Product is not working normally. The rating level password has been forgotten.

Can't receive radio broadcasts.

Is the antenna connected properly? If the antenna's input signal is weak, install an external FM antenna in an area with good reception. If the OPEN/CLOSE ( ) button is pressed while listening to TV audio using the D.IN or AUX functions, the BD/DVD functions are turned on and the TV audio is muted. The features or action cannot be completed at this time because: 1. The BD/DVDs software restricts it. 2. The BD/DVDs software doesnt support the feature (e.g., angles) 3. The feature is not available at the moment. 4. Youve requested a title or chapter number or search time that is out of range. Check the connection between the TV and the HDMI jack of the Product. Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution. If random noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection). Press the STOP () button (on front panel) for more than 5 seconds with no disc inside. All settings will revert to the factory settings. When the factory default settings are restored, all the user data stored in the BD data will be deleted.

While listening to TV audio through the Product, no sound is heard. "Not Available" appears on screen.

No HDMI output. Abnormal HDMI output screen.

If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV.

64

English

06 Other information

Symptom PC Share Manager function

I can see folders shared through the PC Share Manager, but I cannot see the les.

Check/Remedy

Since it shows only les corresponding to the Image, Music, and Movie categories, les that do not correspond to these categories may not be displayed.

AllShare function
Video is played intermittently. Check if the network is stable. Check if the network cable is properly connected and if the network is not overloaded. Wireless connection between the server and the product is unstable. Check the connection. IP address under the same subnetwork should be unique, otherwise IP collision can results in such a phenomenon. Check if you have a rewall enabled. If so, disable the rewall function.

AllShare connection between TV and PC is unstable.

BD-LIVE
I cannot connect to the BD-LIVE server. Check whether the network connection is successful or not by using Network Test menu. (See page 42) Check whether the USB memory device is connected with product or not. The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 37) Please check whether the BD-LIVE Internet Connection menu is set to Allow (All). If all above fails, contact the contents provider or update the latest rmware. The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 37)

When using the BD-LIVE service, an error occurs.

NOTE

When the factory default settings are restored, all the user data stored in the BD data will be deleted.

English

65

Other information
Index A
Accessories AllShare Angle Anynet+ (HDMI-CEC) Audio Audio Language AV Sync 13 61 49 37 34 48 37

D
Digital Output Disc menu Display DivX(R) Deactivation DivX(R) Registration Dolby Pro Logic ll Mode DSP Dynamic Range Control 36 45 31 38 38 52 52 37

P
Parental Rating Playlist Popup menu Power On/Off Sound Progressive Mode 43 51 46 43 33

R
Region code 10 Remote Control 16 Remote control sensor 14 Repeat 47, 51 Resolution 31

B
Background BD-Live BD-LIVE Internet Connection BD Data Management BD Wise Before Starting (Initial settings) BONUSVIEW 43 61 42 37 31 29 49

E
Energy Saving EQ Optimizer 43 35

F
Front Display 43

S
Search Security Setting the Menu Setup SFE Skip SLEEP (timer) Slow motion Software Upgrade Speaker Setting Step motion Still Mode Subtitle Language Support System 46 43 30 29 52 46 16 47 44 34 47 33 48 44 37

G
General 43

C
Change Password Clock Connections Speaker Wireless receiver module TV HDMI Component Composite Set-Top Box OPTICAL AUX Network LAN Cable Wireless Network FM Antenna Contact Samsung 43 38 18 18 21 23 23 25 25 26 26 26 27 27 28 28 44

H
HDMI Audio HDMI Deep Color HDMI Format 35 33 33

I
Initial Settings Internet@TV Internet@TV Screen Size iPod 37 57 37 55

L
Language Light Effect 42 43

T
Title menu Title list TV Aspect TV Screen Saver 46 46 31 30

M
Mono/Stereo Movie Frame (24 Fs) Musical Room Calibration MUTE 55 33 35 16

U
USB Storage 54

Z N
Network Setup Network Settings Network Status 39 39 42 Zoom 53

66

English

06 Other information

Specications
Power Requirements Power Consumption Weight Dimensions Operating Temperature Range Operating Humidity Range Signal/noise ratio
FM Tuner

AC 120V, 60Hz 75 W 8.3 Ibs 16.9 (W) x 2.4 (H) x 13.0 (D) inches +41F to +95F 10 % to 75 % 70 dB 10 dB 0.5 % Reading Speed : 4.917m/sec Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 20 min. 1 channel : 1.0 Vp-p (75 load) Blu-ray Disc : 480i Y : 1.0 Vp-p (75 load) Pr : 0.70 Vp-p (75 load) Pb : 0.70 Vp-p (75 load) Blu-ray Disc : 1080i, 720p, 480p, 480i DVD : 480p, 480i 1080p, 1080i, 720p, 480p PCM multichannel audio, Bitstream audio, PCM audio 165W x 2 (3) 170W (3) 165W x 2 (3) 165W x 2 (3) 170W (3) Analog input Digital input 70dB 60dB (AUX)500mV 20Hz~20kHz (3dB) 20Hz~44kHz (3dB) DVD : 480i

General

Usable sensitivity Total harmonic distortion BD (Blu-ray Disc) DVD (Digital Versatile Disc)

Disc

CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Composite Video

Video Output
Component Video

Video/Audio

HDMI Front speaker output Center speaker output Surround speaker output Surround Back Speaker output Subwoofer speaker output Frequency response S/N Ratio Channel separation Input sensitivity

Amplifier

English

67

Other information
7.1ch speaker system Speaker system Impedance Frequency range Output sound pressure level Rated input Front 3 87dB/W/M 165W 330W Surround/Surround back Center 3 87dB/W/M 165W 330W 3 87dB/W/M 170W 340W Subwoofer 3 88dB/W/M 170W 340W

140Hz~20kHz 140Hz~20kHz

140Hz~20kHz 40Hz ~ 160Hz

Speaker

Maximum input

Dimensions (W x H x D)

Front : 3.54 x 51.18 x 4.69 inches (Stand base : 9.84 x 9.84 inches) Surround/Surround back : 3.54 x 5.57 x 2.7 inches Center : 14.17 x 2.93 x 2.7 inches Subwoofer : 6.61 x 13.78 x 11.61 inches

Front : 7.21 Ibs, Surround/Surround back : 1.28 Ibs Center : 1.28 Ibs , Subwoofer : 9.92 Ibs *: Nominal specication - Samsung Electronics Co., Ltd reserves the right to change the specications without notice. - Weight and dimensions are approximate. - Design and specications are subject to change without prior notice. Weights

SWA-5000
Power Requirements Power Consumption Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range Output Frequency range S/N Ratio
AC 120V ~60Hz 50 W 2.52 lbs 3 x 9 x 6 inches +41F to +95F 10% ~ 75% 165W x 2 CH 20Hz~20KHz 65dB

68

English

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the originalcarton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center.

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Area Contact Center ` North America Canada 1-800-SAMSUNG (726-7864) Mexico 01-800-SAMSUNG (726-7864) U.S.A 1-800-SAMSUNG (726-7864) ` Latin America Argentine 0800-333-3733 0800-124-421 Brazil 4004-0000 Chile 800-SAMSUNG (726-7864) Nicaragua 00-1800-5077267 Honduras 800-7919267 Costa Rica 0-800-507-7267 Ecuador 1-800-10-7267 El Salvador 800-6225 Guatemala 1-800-299-0013 Jamaica 1-800-234-7267 Panama 800-7267 Puerto Rico 1-800-682-3180 Rep. Dominica 1-800-751-2676 Trinidad & 1-800-SAMSUNG (726-7864) Tobago Venezuela 0-800-100-5303 Colombia 01-8000112112 ` Europe 0810 - SAMSUNG Austria (7267864, 0.07/min) Belgium 02-201-24-18 800 - SAMSUNG (800-726786) 70 70 19 70 030 - 6227 515 01 48 63 00 00 01805 - SAMSUNG (726-7864 0,14/Min) 06-80-SAMSUNG (726-7864) 800-SAMSUNG (726-7864) 261 03 710 0900-SAMSUNG (0900-7267864) ( 0,10/Min) 815-56 480 0 801 1SAMSUNG (172678) 022-607-93-33 80820-SAMSUNG (726-7864) 0800-SAMSUNG (726-7864) 902 - 1 - SAMSUNG (902 172 678) 0771 726 7864 (SAMSUNG) 0845 SAMSUNG (7267864) 0818 717100 Web Site www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com Area Switzerland Lithuania Latvia Estonia ` CIS Russia Georgia Armenia Azerbaijan Kazakhstan Uzbekistan Kyrgyzstan Tadjikistan Ukraine Belarus Moldova ` Asia Pacic Australia New Zealand Contact Center Web Site 0848 - SAMSUNG (7267864, www.samsung.com/ch www.samsung.com/ CHF 0.08/min) ch_fr/ (French) 8-800-77777 www.samsung.com 8000-7267 www.samsung.com 800-7267 www.samsung.com 8-800-555-55-55 8-800-555-555 0-800-05-555 088-55-55-555 8-10-800-500-55-500 8-10-800-500-55-500 00-800-500-55-500 8-10-800-500-55-500 0-800-502-000 810-800-500-55-500 00-800-500-55-500 www.samsung.com

www.samsung.com www.samsung.com www.samsung.com www.samsung.ua www.samsung.com/ ua_ru

www.samsung.com www.samsung.com/ be (Dutch) www.samsung.com/ be_fr (French) www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com www.samsung.com

Czech Denmark Finland France Germany Hungary Italia Luxemburg Netherlands Norway Poland Portugal Slovakia Spain Sweden U.K Eire

1300 362 603 www.samsung.com 0800 SAMSUNG (0800 726 786) www.samsung.com 400-810-5858 China www.samsung.com 010-6475 1880 www.samsung.com/ hk Hong Kong (852) 3698-4698 www.samsung.com/ hk_en/ 3030 8282 1800 110011 India www.samsung.com 1800 3000 8282 1800 266 8282 0800-112-8888 Indonesia www.samsung.com 021-5699-7777 Japan 0120-327-527 www.samsung.com Malaysia 1800-88-9999 www.samsung.com 1-800-10-SAMSUNG (726-7864) 1-800-3-SAMSUNG Philippines (726-7864) www.samsung.com 1-800-8-SAMSUNG (726-7864) 02-5805777 Singapore 1800-SAMSUNG (726-7864) www.samsung.com 1800-29-3232 Thailand www.samsung.com 02-689-3232 Taiwan 0800-329-999 www.samsung.com Vietnam 1 800 588 889 www.samsung.com ` Middle East & Africa Turkey 444 77 11 www.samsung.com South Africa 0860-SAMSUNG (726-7864) www.samsung.com U.A.E 800-SAMSUNG (726-7864) www.samsung.com Bahrain 8000-4726 Jordan 800-22273

QUESTIONS OR COMMENTS?
COUNTRY IN THE US CALL 1-800-SAMSUNG (7267864) OR VISIT US ONLINE AT www.samsung.com/us WRITE Samsung Electronics America, Inc. 85 Challenger Road Ridgeeld Park, NJ 07660-2112

Code No. AH68-02268N