Scribd
Upload
186 views5 pages

Giant Covalent Structures (SL)

The document describes the giant covalent structures of diamond, graphite, and silicon dioxide. Diamond has each carbon atom bonded to four others in a rigid 3D structure, giving it properties like hardness and high melting point. Graphite also has strong in-plane bonds but layers are bonded weakly, giving it properties like slipperiness and electrical conductivity within layers. Silicon dioxide similarly has each silicon atom bridged to others by oxygen, forming a rigid 3D network structure with properties like hardness and high melting point.

Uploaded by

Brooks Ralph
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
186 views5 pages

Giant Covalent Structures (SL)

The document describes the giant covalent structures of diamond, graphite, and silicon dioxide. Diamond has each carbon atom bonded to four others in a rigid 3D structure, giving it properties like hardness and high melting point. Graphite also has strong in-plane bonds but layers are bonded weakly, giving it properties like slipperiness and electrical conductivity within layers. Silicon dioxide similarly has each silicon atom bridged to others by oxygen, forming a rigid 3D network structure with properties like hardness and high melting point.

Uploaded by

Brooks Ralph
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

GIANT COVALENT STRUCTURES

This page describes the structures of giant covalent substances like diamond, graphite and silicon dioxide (silicon(IV) oxide), and relates those structures to the physical properties of the substances.

The structure of diamond


The giant covalent structure of diamond In diamond, each carbon shares electrons with four other carbon atoms - forming four single bonds.

In the diagram some carbon atoms only seem to be forming two bonds (or even one bond), but that's not really the case. Only a small piece of the whole structure is shown. This is a giant covalent structure - it continues on and on in three dimensions. It is not a molecule, because the number of atoms joined up in a real diamond is completely variable - depending on the size of the crystal. The physical properties of diamond

has a very high melting point (almost 4000C). Very strong carbon-carbon covalent bonds have to be broken throughout the structure before melting occurs. is very hard. This is again due to the need to break very strong covalent bonds operating in 3-dimensions. doesn't conduct electricity. All the electrons are held tightly between the atoms, and aren't free to move. is insoluble in water and organic solvents. There are no possible attractions which could occur between solvent molecules and carbon atoms which could outweigh the attractions between the

covalently bound carbon atoms.

The structure of graphite


The giant covalent structure of graphite Graphite has a layer structure which is quite difficult to draw convincingly in three dimensions. The diagram below shows the arrangement of the atoms in each layer, and the way the layers are spaced.

The layers, of course, extend over huge numbers of atoms - not just the few shown above. You might argue that carbon has to form 4 bonds because of its 4 unpaired electrons, whereas in this diagram it only seems to be forming 3 bonds to the neighbouring carbons. This diagram is something of a simplification, the other electron typically involved in a covalent bond is actually delocalized. The bonding in graphite Each carbon atom uses three of its electrons to form simple bonds to its three close neighbours. That leaves a fourth electron. These "spare" electrons in each carbon atom become delocalised over the whole of the sheet of atoms in one layer. They are no longer associated directly with any particular atom or pair of atoms, but are free to wander throughout the whole sheet. The important thing is that the delocalised electrons are free to move anywhere within the sheet - each electron is no longer fixed to a particular carbon atom. There is, however, no direct contact between

the delocalised electrons in one sheet and those in the neighbouring sheets. The atoms within a sheet are held together by strong covalent bonds. So what holds the sheets together? In graphite you have the ultimate example of van der Waals dispersion forces. As the delocalised electrons move around in the sheet, very large temporary dipoles can be set up which will induce opposite dipoles in the sheets above and below - and so on throughout the whole graphite crystal.

The physical properties of graphite

has a high melting point, similar to that of diamond. In order to melt graphite, it isn't enough to loosen one sheet from another. You have to break the covalent bonding throughout the whole structure. has a soft, slippery feel, and is used in pencils and as a dry lubricant for things like locks. You can think of graphite rather like a pack of cards - each card is strong, but the cards will slide over each other, or even fall off the pack altogether. When you use a pencil, sheets are rubbed off and stick to the paper. has a lower density than diamond. This is because of the relatively large amount of space that is "wasted" between the sheets. is insoluble in water and organic solvents - for the same reason that diamond is insoluble. Attractions between solvent molecules and carbon atoms will never be strong enough to overcome the strong covalent bonds in graphite. conducts electricity. The delocalised electrons are free to move throughout the sheets. If a piece of graphite is connected into a circuit, electrons can fall off one end of the sheet and be replaced with new ones at the other end.

The structure of silicon dioxide, SiO2


Silicon dioxide is also known as silicon(IV) oxide. The giant covalent structure of silicon dioxide

There are three different crystal forms of silicon dioxide. The easiest one to remember and draw is based on the diamond structure. Crystalline silicon has the same structure as diamond. To turn it into silicon dioxide, all you need to do is to modify the silicon structure by including some oxygen atoms.

Notice that each silicon atom is bridged to its neighbours by an oxygen atom. Don't forget that this is just a tiny part of a giant structure extending on all 3 dimensions.
Note: If you want to be fussy, the Si-O-Si bond angles are wrong in this diagram. In reality the "bridge" from one silicon atom to its neighbour isn't in a straight line, but via a "V" shape (similar to the shape around the oxygen atom in a water molecule). It's extremely difficult to draw that convincingly and tidily in a diagram involving this number of atoms. The simplification is perfectly acceptable.

The physical properties of silicon dioxide Silicon dioxide

has a high melting point - varying depending on what the particular structure is (remember that the structure given is only one of three possible structures), but around 1700C. Very strong silicon-oxygen covalent bonds have to be broken throughout the structure before melting occurs. is hard. This is due to the need to break the very strong covalent bonds. doesn't conduct electricity. There aren't any delocalised electrons. All the electrons are held tightly between the atoms, and aren't free to move. is insoluble in water and organic solvents. There are no possible attractions which could occur between solvent molecules and the silicon or oxygen atoms which could overcome the covalent bonds in

the giant structure.

You might also like