Scribd
Upload
122 views6 pages

Capacitors and Inductors With Current and Voltage Represented Graphically

This document discusses solving circuits containing capacitors or inductors using element equations that relate the voltage and current through graphical representations. It provides 5 examples of circuits with a single inductor or capacitor connected to an independent current or voltage source. The current and voltage are plotted versus time. The examples show using interpretations of the element equations to determine element values like capacitance, inductance, or the current/voltage at a given time by analyzing slopes and areas under the graphs.

Uploaded by

gusaleman
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
122 views6 pages

Capacitors and Inductors With Current and Voltage Represented Graphically

This document discusses solving circuits containing capacitors or inductors using element equations that relate the voltage and current through graphical representations. It provides 5 examples of circuits with a single inductor or capacitor connected to an independent current or voltage source. The current and voltage are plotted versus time. The examples show using interpretations of the element equations to determine element values like capacitance, inductance, or the current/voltage at a given time by analyzing slopes and areas under the graphs.

Uploaded by

gusaleman
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Capacitors and Inductors with Current and Voltage Represented Graphically

Introduction
Each of the circuits in this problem set consists of a single capacitor or inductor and a single independent source. When the independent source is a current source, the current source current is equal to the current in the capacitor or inductor. Similarly, when the independent source is a voltage source, the voltage source voltage is equal to the voltage across the capacitor or inductor. These problems can be solved using the element equations for the capacitor and inductor. (An element equation is the equation that describes the relationship between the element voltage and element current.) The element equations of capacitors and inductors involve derivatives and integrals. Since the voltages and currents in these problems are described graphically, its useful to interpret derivatives as slopes and integrals as areas. Capacitors and inductors are described in Sections 7.3 and 7.6 of Introduction to Electric Circuits by R.C. Dorf and J.A Svoboda.

Worked Examples
Example 1: Consider the circuit shown in Figure 1. Find the value of the capacitance C.

Figure 1 The circuit considered in Example 1. Solution: The current and voltage of the capacitor are related by

i (t ) = C

d v (t ) dt

(1)

Since i(t) and v(t) are represented graphically, by plots rather than equations, it is useful to interpret Equation 1 as
the value of i ( t ) = C the slope of v ( t )

Pick a time when both the value of i(t) and the slope v(t) are easily determined. For example, at time t = 3 seconds, i(3) = 8 mA = 0.008 A and

d 0 12 V v ( 3) = =4 dt 25 s (The notation d d v ( 3) indicates that the derivative v ( t ) is evaluated at time t = 3 s.) Using dt dt Equation 1 at time t = 3 s gives 0.008 = C ( 4 ) C = 0.002 A = 0.002 F = 2 mF V/s

Example 2: Consider the circuit shown in Figure 2. Find the value of the inductor voltage, v(t), at time t = 3 ms. (That is, find v(0.003).)

Figure 2 The circuit considered in Example 2. Solution: The voltage and current of the inductor are related by

v (t ) = L

d i (t ) dt

(2)

Since i(t) and v(t) are represented graphically, by plots rather than equations, it is useful to interpret Equation 2 as
2

the value of v ( t ) = L the slope of i ( t )

The value of the voltage at time t = 3 ms = 0.003 s is required. We need to determine the slope of i(t) at time t = 0.003 s. That slope is 0 ( 0.012 ) d A i ( 0.003) = = 6 dt 0.002 0.004 s (The notation d d i ( 0.003) indicates that the derivative i ( t ) is evaluated at time t = 0.003 s.) dt dt

The inductance of the inductor in Figure 2 is L = 3 H. Using Equation 2 gives v ( 0.003) = 3 ( 6 ) = 18 H A = 18 V s

Example 3: Consider the circuit shown in Figure 3. Find the value of the inductance L.

Figure 3 The circuit considered in Example 3. Solution: The current and voltage of the inductor are related by

i (t ) = or

1 L

v ( ) d + i ( t )
t0 0

(3)

i ( t ) i ( t0 ) =

1 L

v ( ) d
t0

(4)

Since i(t) and v(t) are represented graphically, by plots rather than equations, it is useful to interpret Equation 4 using 3

and
t t0

i(t) - i(t0) = the difference between the values of voltage at times t and t0

v ( ) d = the area under the plot of

v(t) versus t, for times between t and t0

Pick convenient values t and t0, for example, t0 = 2 ms and t = 6 ms. Then and i(t) - i(t0) = 1 (-2) = 3 A

t t0

v ( ) d =

0.006 0.002

30 d = (30) (0.006-0.002) = 0.12 V-s

Using Equation 4 gives 3= 1 V-s = 0.040 H = 40 mH ( 0.12 ) L = 0.040 L A

Example 4: Consider the circuit shown in Figure 4. Find the value of the inductor current, i(t), at time t = 3 ms. (That is, find i(0.003).)

Figure 4 The circuit considered in Example 4. Solution: The current and voltage of the inductor are related by

i (t ) =

1 L

v ( ) d + i ( t )
t0 0

(5)

Since i(t) and v(t) are represented graphically, by plots rather than equations, it is useful to interpret Equation 5 using

v ( ) d = the area under the plot of


t0

v(t) versus t, for times between t and t0

The values t and t0 are specified to be t0 = 0 ms and t = 3 ms. Then i(t0) = 2 A and

v ( ) d =
t0

0.002 0

0 d +

0.003 0.002

30 d = 0 + (-30) (0.003-0.002) = -0.03 V-s

At time t0 = 0 ms the inductor current is give to be i(t0) = 2 A . The inductance of the inductor in Figure 4 is L = 20 mH = 0.02 H. Using Equation 5 gives i ( 0.003) = 1 ( 0.03) + 2 = 0.5 A 0.02

Example 5: Consider the circuit shown in Figure 5. Find the value of the capacitance C.

Figure 5 The circuit considered in Example 5. Solution: The current and voltage of the capacitor are related by

i (t ) = C

d v (t ) dt

(6)

Since i(t) and v(t) are represented graphically, by plots rather than equations, it is useful to interpret Equation 6 as
the value of i ( t ) = C the slope of v ( t )

Pick a time when both the value of i(t) and the slope v(t) are easily determined. For example, at time t = 2.5 seconds, i(2.5) = 50 mA = 0.050 A and

3 ( 2 ) d V v ( 2.5 ) = =1 dt 23 s

(The notation

d d v ( t ) is evaluated at time t = 2.5 s.) v ( 2.5 ) indicates that the derivative dt dt Using Equation 6 at time t = 2.5 s gives 0.050 = C (1) C = 0.050 A = 0.050 F = 50 mF V/s

You might also like