MPA5500 A.C.

POWER ADAPTOR
The MPA5500 enables any MTL5500 Series module that is normally powered from a nominal 24V DC supply (i.e. those that are not looppowered) to be powered from a high-voltage AC supply. It plugs into the power socket (terminals 13 and 14) of an MTL5500 module and clips securely onto the module housing. The 25V DC power output from the adaptor is sufficient to supply a single module and can be connected to any normal AC power source.

PCS45/PCL45USB CONFIGURATOR FOR MTL CONVERTERS

The PCS45/PCL45USB configurator allows MTL converters to be configured from a standard PC running a Microsoft Windows operating system. It comprises PC software, provided on a CD (PCS45), and an ATEX certified interfacing link (PCL45USB). Converters can be configured from the safe area, while on-line, and configurations can be saved to disk and printed out when required. It is suitable for use with MTL4000, MTL4500, MTL5000 and MTL5500 series products.
Safe area

AC inputs 133 20

15.8

MTL5500 MTL4500

USB connector

3-pole jack plug 3.5mm PCS45 software CD

118.8

MTL5073 MTL5074

MTL4073 MTL4075

Interfacing link
PCL45USB
II (1) G [EEX ia] IIC TV 99 ATEX 1390 PC LINK Um = 250V Max. tamb. 60C

For electrical data and application conditions see approval

11 Direction of removal of MPA5500 Area required for removal of MPA5500

Use adapter cable provided

Made in Bochum, Germany MTL Instruments GmbH

0032
S/N: 1201

Top of DIN rail

SPECIFICATION
Input voltage 85 265V AC, (4565Hz) Efficiency 71% typ. at 230V AC Power dissipation 1.2W typ at 230V AC. Input terminals Cage-clamp terminals accommodating conductors up 2 to 1.5mm stranded or 16AWG single-core Input protection internal fuse, not user serviceable Output voltage 25Vdc 10% Output current 120mA at 25V Ambient temperature Operating: 20 to +60C Storage: 40 to +80C Mounting Plugs into and clips onto MTL5500 Series I/O module It is not for use with any equipment other than MTL5500. Humidity 5 to 95% relative humidity Mechanical Ingress Protection: IP20 Material: polycarbonate Weight: 28g approx. Standards compliance EN 61326, EN 61010

SPECIFICATION
PCL45USB hardware Location Safe area Connections PC side: USB B(F) socket Converter side: cable with 3.5mm jackplug, 3-pole for MTL4500 and MTL5500 series converters. An adapter cable is provided for other earlier MTL converters. Cable lengths Converter side (fitted): 1.5m USB cable A(M) to B(M) (supplied): 2m Ambient temperature limits 10C to +60C operating 20C to +70C storage Humidity 5 to 95% relative humidity (non-condensing) Weight 200g PCS45 Configuration software Compatible with Windows 2000 or Windows XP. Consult MTL for operation with any other operating system, e.g. Windows Vista. Software medium PCS45 supplied on CD Updates are available at www.mtl-inst.com Recommended minimum PC configuration Microsoft Windows 2000 or Windows XP 20MB of available hard disc space CD ROM drive Available USB port Printer (local or network)
The given data is only intended as a product description and should not be regarded as a legal warranty of properties or guarantee. In the interest of further technical developments, we reserve the right to make design changes.

EUROPE (EMEA): +44 (0)1582 723633 [email protected]

THE AMERICAS: +1 800 835 7075 [email protected]

ASIA-PACIFIC: +65 6 487 7887 [email protected] EPS45/5500 Rev3 250310

MTL5991 24V DC POWER SUPPLY

A DIN-rail mounted unit for locations where a dc supply is not readily available. The wide input power supply range makes this unit universally applicable and the 24V dc , 2A output will drive a useful number of MTL5000 and MTL5500 series modules.
Safe area

MTL5500 SERIES POWERBUS KITS

PB - 8T,16T,24T,32T
A quick and easy way to distribute DC power to MTL5500 Series modules. Each powerbus kit includes 4 single ferrules, 4 twin ferrules and 2 insulation displacement connectors (Scotchlok).

+
4 5 6 7 8 + 1 2 3

x2
Optional insulation displacement connectors

SPECIFICATION
Power supply 85 to 264V ac 47 to 63Hz Power dissipation within unit 7.2W @ 2A Mounting 35mm DIN (top hat) rail Output voltage 24V dc nom (23.64 min/24.36 max) Output current 2A maximum (1.7A with <105V ac input) LED indicators Green: Power indication Weight 310g Ambient temperature Operating temperature 10C to +50C Storage temperature 40C to +85C Terminals 2 Cage clamp type accommodating conductors up to 2.5mm , stranded or single-core
Note: Segregation between hazardous and safe area wiring must be maintained.
4 5 6 7 8

SPECIFICATION
Available in 4 different lengths: PB - 8T = 8 connectors and loops PB - 16T = 16 connectors and loops PB - 24T = 24 connectors and loops PB - 32T = 32 connectors and loops Insulation material : PVC Conductor : 2 24 strands of 0.2mm dia (0.75mm ) standard copper Insulation thickness : 0.5 to 0.8 mm Current rating : 12A max Operating temperature range : - 20C to +60C Max voltage drop on 32 modules drawing 130mA max : 0.5V

1 2 3

90 (3.54)

38 (1.5)

CHOOSING A POWERBUS KIT

Choose a powerbus where the number of power plugs is greater than or equal to the number of isolators to be powered and if necessary cut the powerbus to the required number of terminations.
Note: To reduce the risk of excessive voltage drop or overcurrent do not connect powerbuses in series.

113.6 (4.47)

108 (4.25)

The given data is only intended as a product description and should not be regarded as a legal warranty of properties or guarantee. In the interest of further technical developments, we reserve the right to make design changes.

EUROPE (EMEA): +44 (0)1582 723633 [email protected]

THE AMERICAS: +1 800 835 7075 [email protected]

ASIA-PACIFIC: +65 6 487 7887 [email protected] EPS45/5500 Rev3 250310

125

5.5

131 (inside)

MTL5500 SERIES ENCLOSURES

187 157 70 107 175

150

DIMENSIONS (mm) AND MOUNTING

270 7.2

137 540

DX070

102

80 305 395 339 360 249 430 102 170 520 576 249 305

DX430

DX170

147 (inside)

Top of DIN rail

Top of DIN rail

SPECIFICATION
Construction Glass reinforced polycarbonate base - DX070 Glass reinforced polyester base - DX170, DX430 Transparent polycarbonate lid Protection Dust-tight and water-jet proof to IEC529:IP65 Lid fixing Captive fixing screws Weight (excluding barriers/isolators) kg DX070 0.8 DX170 2.6 DX430 4.1 Items provided DIN rail - fitted ETL7000 Earth terminals (2 x) - fitted "Take care IS" front adhesive label Cable trunking (except DX070)
Note: Isolators are not included.

Note: N. America/Canada - Enclosures are rated NEMA 4X so can be used in Class 1, Division 2 (gases) location, but check with local requirements and ensure all cable entries also conform. Additional warning label will be required on or near the enclosure, see installation details. Not suitable for Class II or III, Division 2 hazardous locations. Approximate capacities (on DIN rail between earth terminals)
* Use these figures when IMB57 mounting blocks for tagging/earth are included.

Number of MTL5500 isolators DX070 DX170 DX430 4 10 26 (2)* (8)* (24)*

Ambient temperature limits Dependent on units fitted. See instruction manual INM5500.

Mounting Wall fixing lugs provided. For further details refer to INM5500. Tagging and earth rail Accommodates MTL5500 Series accessories. Permitted location Safe (non-hazardous) area
The given data is only intended as a product description and should not be regarded as a legal warranty of properties or guarantee. In the interest of further technical developments, we reserve the right to make design changes.

EUROPE (EMEA): +44 (0)1582 723633 [email protected]

THE AMERICAS: +1 800 835 7075 [email protected]

ASIA-PACIFIC: +65 6 487 7887 [email protected] EPS45/5500 Rev3 250310

147 (inside)

184

184

80 7.2

270

MTL5500 SERIES ACCESSORIES

MTL5500 Series isolators mount quickly and easily onto standard DIN rail. A comprehensive range of accessories simplifies earthing and tagging arrangements.
THR2 IMB57 PWR5000 ERB57S

ERB57S Earth-rail bracket, straight Nickel-plated; supplied with two push fasteners, one (14mm, 2 2 35mm ) earth-rail clamp and one (10mm, 16mm ) earth clamp.
3mm 150mm 10mm

16mm2

35mm2

16mm2

35mm2

10mm

14mm

10mm

14mm

ERL7 Earth rail, 1m length Nickel-plated; may be cut to length.

3mm

10mm

SAF10-12 ERL7 ETM7 TH5000 HAZ4-6 TAG57 SAF7-9

ETM7 Earth terminal, bag of 50 For terminating cable screens and 0V returns on the ERL7 2 earth rail. For cables 4mm . Exact dimension dependent on manufacturer.
Type A Type B

HAZ1-3

TGL57

5.5 mm

7mm

MOUNTING
THR2 DIN rail,1m length DIN rail to EN50022; BS5584; DIN46277 MS010 DIN rail module spacer, 10mm, pack of 5 Grey spacer, one required between each MTL5995 and any adjacent module on a DIN rail, to provide 10mm air-circulation space between modules

TAG57 Tagging strip, 1m length Cut to size. Supplied with tagging strip label suitable for MTL5000 or MTL5500 modules.
31mm

DIN-rail module spacer

TGL57 Tagging strip labels, set of 10 x 0.5m Spares replacement, for use with TAG57 tagging strip. Suitable for MTL5000 or MTL5500 modules.

INDIVIDUAL ISOLATOR IDENTIFICATION

G-section DIN rail

EARTH RAILS AND TAG STRIP

IMB57 Insulating mounting block One required at each end of a tagging strip/earth rail. Suitable for low-profile (7.5mm) and high-profile (15mm) symmetrical DIN rail.

TH5000 tag holders Each isolator may be fitted with a clear plastic tag holder, as shown below. Order TH5000, pack of 20.
TH5000

CONNECTORS
135mm

Each MTL5500 unit is supplied with signal and power connectors, as applicable.
82mm

Spares replacement connectors are available separately; see ordering information.

28mm

See also MTL5500 Series powerbus kits'

The given data is only intended as a product description and should not be regarded as a legal warranty of properties or guarantee. In the interest of further technical developments, we reserve the right to make design changes.

66mm

15mm

EUROPE (EMEA): +44 (0)1582 723633 [email protected]

THE AMERICAS: +1 800 835 7075 [email protected]

ASIA-PACIFIC: +65 6 487 7887 [email protected] EPS45/5500 Rev3 250310

CUSTOM, STANDARD AND UNIVERSAL BACKPLANES FOR EASY DCS INTEGRATION

Total flexibility Reduce wiring Simplify installation Special functions Signal conditioning HART integration

The MTL4500 Series backplanes, enclosures and other accessories provide comprehensive, flexible and remarkably compact mounting facilities for system vendors, original equipment manufacturers and end users alike.

OPTIONAL ACCESSORIES
Optional accessories include colour coded tagging strip kits for all three sizes of backplane and earth rail kits for 8 and 16-way versions. Mounting accessories are available for surface (all backplanes), T-section and G-section DIN-rail (8- and 16-way versions), and a horizontal plate for mounting 24-way backplanes in 19-inch racks.

CUSTOMISED BACKPLANES
MTL provides a complete design and manufacturing service for customised backplanes. Customised backplanes give the vendors and users of process control and safety systems the opportunity to integrate MTL4500/HART modules directly into their system architecture. As there are no hazardous-area circuits on the backplanes, customised versions can be produced without the need for IS certification, so simplifying design and lowering costs.

WEATHERPROOF ENCLOSURES
Weatherproof enclosures are available for applications where separate safearea enclosures are required for backplanes with modules. Available to accommodate one 4-way or one 8-way backplane, they are manufactured from GRP giving protection against dust and water to IEC529:IP65. The lids are made from transparent high-strength polycarbonate so that LEDs, switches, etc, on the tops of the modules are easy to see.

UNIVERSAL CUSTOM BACKPLANES

The 'universal' backplane allows a fast and economic approach to providing a custom interface. Where tight time schedules exist, the backplane can be installed to allow the panel building and wiring to be completed. The customised adapter card can then be plugged in at any time up to integrated test.

DCS VENDORS/SYSTEMS SUPPORTED:

ABB Automation S100, INFI90 Rockwell Automation Bently-Nevada Foxboro IA FBM & FBM2xx Siemens-Moore APACS, Quadlog Honeywell TDC, Plantscape Honeywell-SMS FSC ICS Triplex, Plantguard Triconex Tricon, Trident Yokogawa Centum XL, XL, CS1000, CS3000, R3 Yokogawa Industrial Safety Systems ProSafe & ProSafe RS

ADAPTER CARDS
Adapter cards already exist for many of the DCS companies. In addition there is a range of general purpose cards that offer reduced wiring for use with specific MTL modules. These are also available in left- and right-hand versions to ease panel wiring.

STANDARD MTL BACKPLANES

Standard MTL backplanes are available to accommodate 4, 8, 16, or 24 modules using screw-clamp connectors for the safe-area circuits. On an individual backplane, any module can be plugged into any position and module types can be mixed. For 8-, 16- and 24-way backplanes, screw-clamp connectors which plug into the backplanes provide primary and secondary 24V dc power supplies. Power to several 8- or 16-way backplanes can be interconnected to reduce and simplify wiring see instruction manual INM4500 for details.

MTL CPS STANDARD BACKPLANES

MOUNTING KITS Backplane model no. CPS04 CPS08 CPS16 CPS24 Number of modules 4 8 16 24 Safe-area connections Screwclamp Screwclamp Screwclamp Screwclamp Surface SMS01 SMS01 SMS01 SMS01 DINrail (T or G) DMK01 DMK01 DMK01 DMK01 19inch rack HMP24 Earthrail kit ERK08 ERK16 TSK08 TSK16 TSK24 ACCESSORIES Tagging strip kit Spare fuse pack FUS1.0ATE5 FUS1.0ATE5 FUS2.0ATE5 FUS4.0ATE5

The given data is only intended as a product description and should not be regarded as a legal warranty of properties or guarantee. In the interest of further technical developments, we reserve the right to make design changes.

EUROPE (EMEA): +44 (0)1582 723633 [email protected]

THE AMERICAS: +1 800 835 7075 [email protected]

ASIA-PACIFIC: +65 6 487 7887 [email protected] EPS45/5500 Rev2 110511

CPS BACKPLANE dimensions (mm)

157

285 28.5
B

72 59
B

28.5

96

112

112
B

32

38

38
B

B B

9 1 0 11 12 13 14 15 16
A

BPS16 CPS16

BPS08 CPS08

175

175 113

BPS16-CC CPS16-CC

170 132

BPS08-CC CPS08-CC

113

A
C C

C C

C C

CPS04

CPS08

CPS16

446 10 23
B

143

139

143
B

A
B
BPS24 CPS24

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

A
B

100 140

Power requirements, Vs 21V dc to 35V dc through plug-in connectors Safearea connections 2 CPS: 2.5mm screw-clamp terminals 6 positions per module Power sense Through separate plug-in crimp connector Weight (without modules or accessories) CPS04: CPS08: CPS16: CPS24: 96g 225g 419g 592g

BPS24-CC CPS24-CC

CPS24

BACKPLANE ACCESSORIES
Earth terminals Tagging strip

HMP24 MOUNTING PLATE FOR 19 INCH RACK

Earth rail

483mm

Fuses
132.5mm (3U)

The given data is only intended as a product description and should not be regarded as a legal warranty of properties or guarantee. In the interest of further technical developments, we reserve the right to make design changes.

EUROPE (EMEA): +44 (0)1582 723633 [email protected]

THE AMERICAS: +1 800 835 7075 [email protected]

ASIA-PACIFIC: +65 6 487 7887 [email protected] EPS45/5500 Rev3 250310

ORDERING INFORMATION

MTL4500/5500 Series isolators Specify part number: eg, MTL4511, MTL5575

MTL4500 Standard Backplanes CPS04 4-way backplane screw-clamp connector CPS08 8-way backplane screw-clamp connector 16-way backplane screw-clamp connector 24-way backplane screw-clamp connector CPS16 CPS24

Individual isolator identification TH5000 Tag holder (Pack of 20) Connectors - MTL4500 & MTL5500 HAZ1-3 Hazardous-area plug, terminals 1, 2 and 3 HAZ4-6 HAZ-CJC Hazardous-area plug, terminals 4, 5 and 6 Hazardous-area plug, terminals 1 and 3 with cold-junction sensor

MTL4500 Custom Backplanes Contact MTL for options and advice MTL4500 Backplane mounting accessories DMK01 DIN-rail mounting kit, T- or G-section (pack of 40) 8-way backplanes require 4, 16-way backplanes require 6 SMS01 Surface mounting kit (pack of 40) 4- and 8-way backplanes require 4, 16-way backplanes require 6, 24-way backplanes require 8 Horizontal mounting plate and screws for 19-inch rack mounting 24-way backplanes only BMK08 BMK16 Mounting kit for one 4- or 8-way backplane Mounting kit for one 16-way backplane

HAZ-CJC2 Hazardous-area plug, terminals 4 and 6 with cold-junction sensor SAF1-3 SAF4-6 Safe-area plug, terminals 1, 2 and 3 Safe-area plug, terminals 4, 5 and 6

Connectors - MTL5500 only SAF7-9 Safe-area plug, terminals 7, 8 and 9 SAF10-12 PWR5000 Safe-area plug, terminals 10, 11 and 12 Power connector, terminals 13 and 14

HMP24

PowerBus - MTL5500 only PB-8T Powerbus Kit for up to 8 isolators PB-16T PB-24T PB-32T Powerbus Kit for up to 16 isolators Powerbus Kit for up to 24 isolators Powerbus Kit for up to 32 isolators

MTL4500 Backplane accessories ERK08 Earth rail kit for CPS08 backplane ERK16 TSK08 TSK16 TSK24 Earth rail kit for CPS16 backplane Tagging strip kit for CPS08 backplane Tagging strip kit for CPS16 backplane Tagging strip kit for CPS24 backplane

MTL5500 Mounting accessories THR2 1m length of DIN rail to EN 50022; BS 5584; DIN 46277 MS010 DIN-rail module spacer, 10mm (pack of 5)

FUS1.0ATE5 Fuse kit for 4- and 8-way backplanes, (10 per pack) FUS2.0ATE5 Fuse kit for 16-way backplane, (10 per pack) FUS4.0ATE5 Fuse kit for 24-way backplanes, (10 per pack) MCK45 SCK45 MPL01 MTL4000 backplane conversion kit (16 clip pairs per pack) Module 4-clip strips (10 strips + 40 rivets per pack) Module position label (blank) (50 per pack)

MTL5500 Earth-rail and tag strip accessories IMB57 Insulating mounting block ERB57S ERL7 ETM7 TAG57 TGL57 Earth-rail bracket, straight Earth-rail, 1m length Earth terminal, bag of 50 Tagging strip, 1m length Tagging strip labels, set of 10 x 0.5m

MTL5500 Enclosures DX070 Enclosure for MTL5500 x 4 DX170 DX430 Enclosure for MTL5500 x 10 Enclosure for MTL5500 x 26

Literature INM5500 INM4500

MTL5500 Series instruction manual MTL4500 Series instruction manual

Configurator and software PCL45USB Configurator, PC interface and software PCS45 PC software

Please go to our website at www.mtl-inst.com for the latest information regarding safety approvals, certificates and entity parameters.

The given data is only intended as a product description and should not be regarded as a legal warranty of properties or guarantee. In the interest of further technical developments, we reserve the right to make design changes.

EUROPE (EMEA): +44 (0)1582 723633 [email protected]

THE AMERICAS: +1 800 835 7075 [email protected]

ASIA-PACIFIC: +65 6 487 7887 [email protected] EPS45/5500 Rev3 250310