NeoFlo 1-58 Datasheet PDF

Data Sheet
Product Name
SICC Product Code: V1395 Shrieve Chemical Company Name: BIO-BASE 100 LF Material ID: 47013143 Updated: January 2009
NEOFLO 1-58
Olefin & Paraffin Drilling Fluids

NEOFLO 1-58 is part of our Premium series of synthetic olefin and paraffin drilling fluids. Suitable for both deep and shallow water applications, NEOFLO 1-58 helps reduce the risks associated with offshore discharges. NEOFLO 1-58 biodegrades in both aerobic and anaerobic conditions, is non-toxic in the water column and has low sediment toxicity. The product has a low viscosity and pour point and performs as well or better than traditional oil-based fluids.
Category Description

Classification
NEOFLO 1-58 meets US EPA Gulf of Mexico nonaqueous-based drilling fluid stock limitation requirements as specified in 72 FR No. 109, p. 31575.* NEOFLO 1-58 is an internal olefin with a carbon chain length between C15 and C18.
This product is classified as a synthetic according to the US EPA definition. Synthetic material as applied to synthetic-based drilling fluid means material produced by the reaction of specific purified chemical feedstock, as opposed to the traditional base fluids such as diesel and mineral oil which are derived from crude oil solely through physical separation processes. Physical separation processes include fractionation and distillation and/or minor chemical reactions such as cracking and hydro processing.
* Meets US EPA Gulf of Mexico nonaqueous-based drilling fluid stock limitation requirements as specified in 72 FR No. 109, p. 31575. (Notice of Final NPDES General Permit for New and Existing Sources and New Dischargers in the Offshore Subcategory of the Oil and Gas Extraction Category for the Western Portion of the Outer Continental Shelf of the Gulf of Mexico {GMG290000}): i) PAH <10 ppm according to EPA 1654 ii) Toxicity equal to or less than 65:35 1618IO reference fluid according to ASTM E-1367 iii) Biodegradation equal to or greater than 65:35 1618IO reference fluid according to modified ISO 11734
1/4
Typical Chemical Properties
Property C14 & Lower C15 C16 C17 C18 C19 & Higher n-internal Olefins Branched Olefins n-alpha Olefins Total Paraffins Appearance Color, Pt-Co Water Property Density @ 20C Flashpoint Fire Point Pour Point Aniline Point Kinematic viscosity @ 0C @ 40C @ 100C Boiling Range 5% 95% Vapor Pressure @ 40C
1
Unit
Value
Method
%m/m 0.4 SCG 1086 %m/m 20.2 SCG 1086 %m/m 28.6 SCG 1086 %m/m 29.4 SCG 1086 %m/m 17.4 SCG 1086 %m/m 4.0 SCG 1086 %m/m 91.0 Typical %m/m 6.1 SCG 1086 %m/m 2.8 Typical %m/m 0.1 SRC 00251 Clear & substantially free of visible impurities <5 ASTM D 1209 PPM 20 ASTM D 4672 Unit kg/m C C C C cSt cSt cSt C C mmHg
3
Typical Physical Properties
Value 787 135 146 -12 78 7.8 2.9 1.3
Method ASTM D 4052 ASTM D 3278 ASTM D 92 ASTM D 97 ASTM D 611 ASTM D 445
ASTM D 2887 268 367 < 0.05 Calculated1
Calculated from data on single carbon number olefins.
NEOFLO 1-58
2/4
Typical Environmental Properties
Property Biodegradation Anaerobic Aerobic Aerobic Aerobic Water Column Toxicity

Acartia tonsa Skeletonema costatum Cyprinodon variegatus Mysidopsis bahia Mysidopsis bahia Scophthalmus maximus
Method/Endpoint Modified ISO 11734 275-d OECD 301 D 28-d ISO CO2 Headspace 28-d OECD 306 28-d
Value
Notes BRR 1 = 0.6
70 % 58 % 73 % 76 %
48-h EC50 72-h EC50 OECD 203 96-h LC50 96-h LC50 96-h LC50 SPP 2 OECD 203 96-h LC50
> 1000 mg/L > 1000 mg/L > 1000 mg/L > 1000 mg/L > 106 mg/L > 1500 mg/L
Sediment Toxicity
Leptocheirus plumulosus Leptocheirus plumulosus
Natural sediment 10-d LC50 Formulated sediment 10-d LC50 EPA 1654A
8100 mg/kg 2700 mg/kg < 5 mg/kg
STR 3 = 0.8 STR 3 = 0.8
PAH
1 2
BRR = biodegradation rate ratio (% biodegradation of C1618 internal olefin reference/% biodegradation of test material) SPP = suspended particulate phase 3 STR = sediment toxicity ratio (C1618 internal olefin reference LC50/test material LC50)
Storage and Handling
NEOFLO products may be stored in carbon steel tanks. Hoses manufactured from polyethylene, butyl rubber, or neoprene liners are suitable for discharging. A nitrogen blanket is recommended to reduce potential for product degradation. Antioxidants can be added, upon request, to enhance the long-term stability. The recommended storage temperature is 20C, the recommended maximum is 65C and the recommended minimum is -5C to prevent freezing. NEOFLO 1-58 is classified as non-regulated by the United States Department of Transportation (US DOT). Additional advice on the storage and handling of NEOFLO products can be found at www.shell.com/chemicals, or by contacting your local Shell chemicals companies representative.
Hazard Identification
NEOFLO products have been demonstrated to have a relatively low order of toxicity by the routes of exposure (oral, dermal, inhalation) encountered in normal handling. Like many hydrocarbon liquids, olefins will dry and de-fat the skin on prolonged contact and will result in skin irritation and dermatitis. Also, like other hydrocarbons, this product can be dangerous when aspirated or ingested. Before handling the product, refer to the Material Safety Data Sheet that is available from your local Shell chemicals companies representative. Additional information can be found at www.shell.com/chemicals in the Material Safety Data Sheet section.
NEOFLO 1-58
3/4
Emergency Helpline
Europe (Rotterdam) + 31 (0) 10 431 3233 Americas (United States) + 1 800 424 9300 Asia (Singapore) +65 6263 2974 Or call the emergency telephone number mentioned in the Safety Data Sheet relevant for your companys country and language. The information contained in this publication is to the best of our knowledge, true and accurate, but any recommendations or suggestions that may be made are without guarantee, since the conditions of use are beyond our control. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use. The expression Shell Chemicals refers to the companies of the Shell Group engaged in chemical businesses. Each of the companies which make up the Shell Group of companies is an independent entity. The Shell Group refers to the companies in which Royal Dutch Shell plc directly and indirectly owns investments. NEOFLO is a trademark owned and used by companies of the Shell Group. Shrieve Chemical Products, Inc., located in The Woodlands, Texas, is a privately owned, independent supplier of performance fluids and specialty chemicals including drilling fluids, additives ad production chemicals. BIO-BASE is a trademark of Shrieve Chemical Products Company.
Shell Warranties
NEOFLO 1-58
4/4

NeoFlo 1-58 Datasheet PDF

Uploaded by

Copyright:

Available Formats

NeoFlo 1-58 Datasheet PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

NeoFlo 1-58 Datasheet PDF

Uploaded by

Copyright:

Available Formats

Data Sheet

Typical Chemical Properties

Typical Physical Properties

Value 787 135 146 -12 78 7.8 2.9 1.3

ASTM D 2887 268 367 < 0.05 Calculated1

Calculated from data on single carbon number olefins.

Typical Environmental Properties

Property Biodegradation Anaerobic Aerobic Aerobic Aerobic Water Column Toxicity

Notes BRR 1 = 0.6

8100 mg/kg 2700 mg/kg < 5 mg/kg

STR 3 = 0.8 STR 3 = 0.8

Storage and Handling

You might also like