Hadco Engineering, Inc.

Phone: 1-909-278-1952 M-F 8:00-4:30 pm. PST. Fax: 1-909-278-1954. Office: P.O. Box 18713, Anaheim, CA. 92817-8713 Mfg./Ship/Receiving: 1456 Pomona Road, Corona, CA. 92882-1709

file:///D|/My%20Documents/My%20Webs2/Hadco/Index.htm [7/30/01 11:02:40 PM]

Company Bio

THE COMPANY
Since 1945 Hadco has produced a full line of axle and brake assemblies and components for thousands of light and heavy-duty vehicle applications. Automotive-type steerable axle configurations, single and dual-wheel units with load bearing capacities up to 18,000 pounds per axle. These are just part of Hadco's diversified line of products. In addition to complete assemblies, we also sell a full line of individual parts and components for repair of existing equipment or manufacture of new equipment. Over the years Hadco has served hundreds of original equipment manufacturers producing vehicles ranging from light-duty boat trailers through multi-axle, heavy-duty farm wagons. We maintain a staff of highly trained and experienced engineers, thoroughly knowledgeable in both our products and our customers' problems, to assist our customers in the selection of components that will give maximum performance at minimum cost. You can count on Hadco to provide high-quality products that are tailored to your needs, competitively priced, and delivered on schedule. Your inquiries for technical assistance and quotations are cordially invited and will receive prompt attention.

file:///D|/My%20Documents/My%20Webs2/Hadco/Company.htm [7/30/01 11:02:41 PM]

Contact Information

CUSTOMER SERVICE
If you would like to speak to a customer service representative for order, delivery, or billing related issues, please call the numbers below during the listed hours. If you have online order inquiries, questions, or feedback, please fill out the form below and submit it to us. Or, you may also use the links below to reach the appropriate department directly.
q

1-909-278-1952, M-F 8:30 a.m. - 4:30 p.m. PST. Or fax 1-909-278-1954.

q

E-MAIL CONTACTS SALES ACCOUNTING MAIL DELIVERY

GENERAL INQUIRIES TECHNICAL INFORMATION

Office: P.O. Box 18713, Anaheim, CA. 92817-8713 Mfg./Ship/Receiving: 1456 Pomona Road, Corona, CA. 92882-1709

file:///D|/My%20Documents/My%20Webs2/Hadco/Contact.htm [7/30/01 11:02:42 PM]

Custom Engineering Service

CUSTOM ENGINEERING SERVICE

Running gear is an integral part of a total system that is designed to do a specific job in the most efficient, cost-effective manner possible. Hadco maintains an engineering Department to ensure that your knew trailer designs or modified designs incorporate the ideal running gear for their purpose. Our engineers will work with you to custom-tailor a Hadco system to meet your specific requirements.

ENGINEERING SERVICES Evaluate specific customer requirements. Coordinate with or directly support customer engineering and manufacturing personnel during design, specifications, production engineering and manufacturing phases of trailer development. Make engineering blueprints, specifications, and other data available for customer use. Coordinate with customer to facilitate integration of Hadco systems into assembly.

q q

q q

file:///D|/My%20Documents/My%20Webs2/Hadco/Custom%20Engineering.htm [7/30/01 11:02:43 PM]

Warranty Information

LIMITED WARRANTY
Hadco Industries, Inc., warranties all new products to be free from defects in material and workmanship for the sooner of: a. 12 Months after delivery to the original user b. 18 Months after shipment by Hadco Industries, Inc. Our obligation under this warranty is limited to, at our option, the repair or replacement of any parts which, under normal use and maintenance, prove to be defective in material or workmanship, and only when such parts are returned to us, or to a point designated by us, transportation prepaid, subject to our inspection and approval. This warranty does not obligate us to bear the cost of transportation charges in connection with the replacement or repair of defective parts, nor shall it apply to normal wear nor to any unit which has been subjected to misuse, neglect, or accident, nor to any unit which has been repaired or altered outside of our factory so as, in our judgment, to affect its performance. We make no warranty in respect to items not of our manufacture. These items are subject to warranties of their respective manufacturers through their respective service organizations. We shall in not event be liable for consequential damages or contingent liabilities arising out of the failure of any equipment or parts to operate properly. This warranty is in lieu of all other warranties, whether express or implied, including the warranties of merchantability and fitness for particular use.

file:///D|/My%20Documents/My%20Webs2/Hadco/Warranty.htm [7/30/01 11:02:44 PM]

Axle Beams & Capacities

AXLE BEAMS & CAPACITIES

SELECTION PROCEDURE
1. Determine overhang from layout data: Track-Spring Center Distance 2 2. Select axle size from chart AXLE BEAM CAPACITY CHART
Axle Size Weight Per Foot Section Modules 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0 20.5 21.0 21.5 22.0 22.5 1.5 SQ 7.65 0.562 2491. 2325. 2179. 2051. 1937. 1835. 17.45 1660. 1585. 1516. 1453. 1395. 1341. 1291. 1245. 1202. 1162. 1125. 1089. 1056. 1025. 996. 968. 942. 917. 894. 871. 850. 830. 811. 792. 775. 1.75 SQ 10.40 0.893 3955. 3692. 3461. 3257. 3076. 2914. 2769. 2637. 2517. 2407. 2307. 2215. 2130. 2051. 1977. 1909. 1746. 1786. 1730. 1678. 1628. 1582. 1538. 1495. 1457. 1420. 1384. 1350. 1318. 1287. 1258. 1230. 2.0 SQ 13.60 1.333 5904. 5511. 5166. 4862. 4592. 4350. 4133. 3936. 3757. 3594. 3444. 3306. 3179. 3061. 2952. 2850. 2755. 2666. 2583. 2505. 2431. 2361. 2296. 2234. 2175. 2119. 2066. 2016. 1968. 19.22 1878. 1837. 2.25 SQ 17.20 1.898 8407. 7846. 7356. 6923. 6539. 6194. 5885. 5604. 5350. 5117. 4904. 4708. 4527. 4359. 4203. 4058. 3923. 3796. 3678. 3566. 3561. 3362. 3269. 3181. 3097. 3018. 2942. 2870. 2802. 2737. 2675. 2615. 2.5 SQ 21.20 2.604 11532. 10763. 10091. 9497. 8969. 8497. 8972. 7688. 7339. 7019. 6727. 6453. 6209. 5979. 4766. 5567. 5381. 5209. 5045. 4892. 4748. 4613. 4484. 4363. 4248. 4139. 4036. 3938. 3844. 3754. 3669. 3587. 3.0 SQ 30.60 4.500 19928. 18600. 17437. 16411. 15500. 14684. 13950. 13285. 12681. 12130. 11625. 11160. 10730. 10333. 9964. 9620. 9300. 9000. 8718. 8454. 5205. 7971. 7750. 7540. 7342. 7153. 6975. 6804. 6642. 6488. 6340. 6200. 3.5 SQ 41.60 7.145 31645. 29536. 27690. 26061. 24613. 23317. 22152. 21097. 20138. 19262. 18460. 17721. 17040. 16408. 15822. 15277. 14768. 14291. 13845. 13425. 13030. 12658. 12306. 11974. 11658. 11360. 11076. 10805. 10548. 10303. 10069. 9845. 4.0 SQ 54.40 10.666 47238. 44088. 41333. 38901. 36740. 34807. 33066. 31492. 30060. 28753. 27555. 26453. 25435. 24493. 23619. 22804. 22044. 21333. 20666. 20040. 19450. 18895. 18370. 17873. 17403. 16957. 16533. 16130. 15746. 15379. 15030. 14696.

OVERHANG=

* CHECK STATE AND FEDERAL REGULATIONS ON OVERALL ALLOWABLE VEHICLE WIDTH BEFORE ORDERING *

file:///D|/My%20Documents/My%20Webs2/Hadco/Axle_Beams_&_Capacities.htm [7/30/01 11:02:49 PM]

Trailer Axles

TRAILER AXLES
Hadco axles are manufactured from the finest quality C1040 hot rolled steel. When greater strength is required due to excessive overhang, axles can be made on special order from 4140 hot rolled alloy steel. Axle spindle dimensions are shown in hub series section. Axle capacity cannot exceed the spindle capacity. All axles are furnished complete with spindle nuts, washers and cotter pins, and Z rings where required. DROP Hadco axles 2&1/4" square or less may be manufactured with 2, 3, 4, 5 and 6 inch drop. CAPACITY All axle and axle component capacities are based upon gross load measured at the ground. CAMBER All Hadco straight axles over 70 inches long (2&1/4" sq or less) will be cambered 1&1/2 (Nominal) at center unless otherwise requested. Steering axles are cambered 1&1/2 (Nominal) at the spindle. All dropped axles are cambered 1&1/2 (Nominal) at the drop. TRACK Track is the distance in inches from tire centerline to tire centerline on axle assemblies with single tires. On duals, track is measured at the centerline between the dual tires. TRACK VS. AXLE LENGTH A = distance from outside of hub flange to end of axle in inches. (See drawings on hub series pages for this dimension.) Dish= the distance between the centerline of the tire and the hub face in inches. (May be positive or negative. Positive dish is shown at right.) (See wheel charts for this dimension.) Difference between track and axle length = 2A + 2 Dish (positive dished wheels) = 2A - 2 Dish (negative dished wheels)

Difference between track and axle length is shown in hub series charts. TRACK VS. OUTSIDE TIRE WIDTH Outside tire width of axle assemblies with single tires is track plus the width of one tire plus one (1) inch allowance for camber. OVERHANG Overhang for axles with single tires is the distance from the centerline of the spring to the centerline of the tire. Overhang for axles with dual tires is the distance from the centerline of the spring to the centerline of the duals. OVERHANG VS. AXLE CAPACITY Axle beam carrying capacity is reduced as the overhang is increased. See Axle Beam Capacity Chart.

file:///D|/My%20Documents/My%20Webs2/Hadco/Axles%20-%20Trailer.htm [7/30/01 11:02:50 PM]

Safety Information

IMPORTANT SAFETY INFORMATION

HADCO products are designed with a margin of safety that years of analysis and experience has shown to be more than adequate for their rated capacities, in the service specified. Operation at higher-than-rated speeds or on a terrain or in a service other than specified, overloading, using mismatched components or excessive axle overhang, neglecting to maintain correct tire inflation, or the recommended lubrication frequency, can cause sudden failures with possible serious consequences. We recommend that maximum speed and payload, correct tire inflation pressure, wheel bolt (lug nut) torque and bearing maintenance information be displayed along with other safety information in a conspicuous place on the completed vehicle. Care should be taken to assure equal side-to-side loading. Designers not familiar with factors influencing the stability of towed vehicles (especially at high speed) should contact Hadco Engineering early in the design stage since this stability is dependent on chassis dimensions and weight distribution. Anticipated extremes of terrain or operating conditions must be brought to the attention of Hadco's Engineering Department.

HOW TO DETERMINE CAPACITIES Capacity, in all cases, refers to the load measured at the ground. ASSEMBLIES
In assembling running gear components, it is desirable to match the capacities of the axle, tires, wheels, brakes, etc. as closely as possible. The component with the lowest capacity determines the capacity of the entire running gear. For example, if an axle beam rated at 5800 Ibs., is matched with wheels rated at 2600 Ibs. each (5200 Ibs./axle); tires at 5100 Ibs., and brakes at 5000 Ibs., then the axle assembly capacity is rated for 5000 Ibs. If you select larger capacity brakes, say 5200 Ibs., the axle capacity is then rated by the next lowest capacity component (the tires) at 5100 Ibs.

COMPONENTS
All load carrying components and brakes in this catalog have rated capacities at given speeds. Some components are rated for low speed service only, on specified surfaces. Except where so noted, capacity of components is given at highway speeds, nominally 55 m.p.h. For low speed service ON PAVED SURFACES, WHEEL, HUB and AXLE capacities may be increased: CONSULT HADCO ENGINEERING DEPT. TIRES may not exceed the ratings shown in the tire capacity charts. Individual tire manufacturers' ratings may vary slightly from the values shown and should be used when known. Tire inflation pressure must not exceed the inflation pressure shown for the wheel on which it is to be mounted. BRAKE ratings are not to be exceeded, regardless of speed, without approval of Hadco's Engineering Department. SPRING capacities remain constant regardless of speed.

WHEEL BOLT (LUG NUT) TORQUE.

Lug nuts should be re-torqued after the first 100 miles of operation and checked periodically thereafter. Thread Size 1/2"-20 5/8"-18 3/4"-16 Torque Ft.-Lbs 70-90 125-140 450-500

file:///D|/My%20Documents/My%20Webs2/Hadco/Safety.htm [7/30/01 11:02:57 PM]

Steering Geometry - 2 Wheel

STEERING GEOMETRY 2-WHEEL

file:///D|/My%20Documents/My%20Webs2/Hadco/Steering_Geometry.htm [7/30/01 11:02:58 PM]

Steering Geometry - 4 Wheel

STEERING GEOMETRY (4-WHEEL)

The four-wheel steer design creates the most perfect tracking of vehicles in train, with minimum inside turning radius.

file:///D|/My%20Documents/My%20Webs2/Hadco/Steering_Geometry_4-wheel.htm [7/30/01 11:03:00 PM]

Brake Drums

BRAKES DRUMS
5 ON 5-1/2 B.C. DRUM Part #'s 524377 & 524891 -7 x 1-3/4 parking brakes. -Weight each - 4.5 lbs

5 ON 4-1/2 B.C. DRUM Part #'s 524899 & 524893 -7 x 1-3/4 parking brakes. -Weight each 5 lbs. 4 ON 4 B.C. DRUM Part # 524894 -7 x 1-3/4 parking brakes. -Weight each - 5 lbs.

5 ON 5.5 B.C. DRUM Part #'s 524079 & 522999 -Deep dish for 12 x 2 brakes. -Weight each - 20 lbs.

5 ON 4-1/2 B.C. DRUM Part # 524054 5 ON 5 B.C. DRUM Part # 524058 5 ON 5-1/2 B.C. DRUM Part # 524062* 6 ON 5-1/2 B.C. DRUM Part # 524064
-12 x 2 parking, electric, or hydraulic brakes. -Weight each - 18 lbs.

*(For 70-85 Series)

file:///D|/My%20Documents/My%20Webs2/Hadco/Brakes%20-%20Drums.htm [7/30/01 11:03:02 PM]

Brake Drums

BRAKES DRUMS
5 ON 8 B.C. DRUM Part # 524908 6 ON 8-3/4 B.C. DRUM Part # 524910

-12 x 3 hydraulic brake. - 28 lbs. single wheels.

8 ON 6-1/2 B.C. DRUM Part # 524907 -12 x 3 hydraulic brake. - 28 lbs. single wheels.

8 ON 6-1/2 B.C. DRUM Part # 524911 -Dual wheels. -Weight each - 39 lbs.

5 ON 4-1/2 B.C. DRUM Part # 524007 5 ON 5-1/2 B.C. DRUM Part # 524013 -10 x 2-1/4 hydraulic. -10 x 2-1/4 electric. -Weight each - 14 lbs.

Picture Not Available

file:///D|/My%20Documents/My%20Webs2/Hadco/Brakes%20-%20Drums2.htm [7/30/01 11:03:03 PM]

Brakes - Electric

ELECTRIC BRAKES
Hadco offers a complete line of service brakes and actuating kits. Parking lever and parking brake linkages are available for some brakes as noted.
Brake Stopping Capacity 1.Rated stopping capacity is given per axle (set of two brakes) for highway service. 2.Contact Hadco Sales Department for brake capacity on slow speed vehicles or for information on special brake applications. 3.Stopping capacity decreases as tire size is increased.

12 x 2 - 12V Part #'s 518162 ( R.H.) 518163 ( L.H.)

q q

q q

Includes mounting hardware. Nominal stopping capacity: 5,200 lbs. per axle with 15 inch tires. Specify with or without brake wire. Weight each 15.5 lbs.

12-1/4 x 3-1/2 12V Part #'s 518164 (R.H.) 518165 (L.H.)

q q q q

Includes armature plate and mounting hardware. Nominal stopping capacity: 8,500 lbs. with 15" tires. Specify with or without brake wire. Weight each 32 lbs.

*18120RH 18121LH fits 24902 & 24903 drums *18164RH 18165LH fits 24300 & 24301 drums

file:///D|/My%20Documents/My%20Webs2/Hadco/Brakes%20-%20Electric.htm [7/30/01 11:03:05 PM]

Brakes - Hydraulic

HYDRAULIC BRAKES
Hadco offers a complete line of service brakes and actuating kits. Parking lever and parking brake linkages are available for some brakes as noted. Brake Stopping Capacity
1.Rated stopping capacity is given per axle (set of two brakes) for highway service. 2.Contact Hadco Sales Department for brake capacity on slow speed vehicles or for information on special brake applications. 3.Stopping capacity decreases as tire size is increased.

12 x 2 - HYDRAULIC Part #'s 518173 ( R.H.) 518172 ( L.H.)

q

q q

Single Cylinder includes mounting hardware. Nominal stopping capacity: 5,000 lbs. per axle with 15" tires Use with surge actuator See hydraulic line & fitting kit chart. Wheel Cylinder diameter: 11/8 inches. Weight each 14.5 lbs.

DISC BRAKE - HYDRAULIC Part #'s 519741 (R.H.) 519739 (L.H.)

q q

Fits 385 Hub series Includes mounting hardware. Nominal stopping capacity: 7,500 lbs. with 15" tires. Use with vacuum or air over hydraulic actuation. Weight each 19 lbs.

file:///D|/My%20Documents/My%20Webs2/Hadco/Brakes%20-%20Hydraulic.htm (1 of 2) [7/30/01 11:03:09 PM]

Brakes - Hydraulic

12-1/4 X 3 - HYDRAULIC Part #'s 519830 (R.H.) 519831 (L.H.)

q q

q q

Includes mounting hardware. Nominal stopping capacity: 8,500 lbs. with 15" tires. Use with vacuum over hydraulic actuation. Weight 20 lbs.

15 X 4 - HYDRAULIC Part #'s 518181 (R.H.) 518180 (L.H.)

q q

q q

q q

Includes mounting hardware. Nominal stopping capacity: 12,000 lbs. with 20" tires. For use with 20" wheels. See Hub series section for hub & drum combinations. Wheel Cylinder diameter: 1-5/8." Weight each 31 lbs.

file:///D|/My%20Documents/My%20Webs2/Hadco/Brakes%20-%20Hydraulic.htm (2 of 2) [7/30/01 11:03:09 PM]

Brakes - Linkages

BRAKE LINKAGES
TYPE 8194 LINKAGE -Cable linkage with over-center lever.

For actuating 19538 ( 7 x 1-3/4 ) parking brakes. 518847 Lever included with linkage assembly. Average assembly weight - 10 lbs.

TYPE 8423 LINKAGE -Cable linkage with over-center lever.

For actuating ( 12 x 2 ) parking brakes and hydraulic brakes with parking lever. 518847 Lever included with linkage assembly. Average assembly weight - 10 lbs.

OVER CENTER TYPE HAND BRAKE LEVER - 518847

q q

Over center type with brake adjustment built into the lever handle. Over center principle generates high application force. Weight - 4.0 lbs.

When ordering custom axle assemblies this brake linkage is included for parking brakes. Please specify A, B, C, D & E dimensions.

file:///D|/My%20Documents/My%20Webs2/Hadco/Brakes%20-%20Linkages.htm [7/30/01 11:03:10 PM]

Brakes - Parking&Service

PARKING & SERVICE BRAKES

Three different types of actuating linkage systems are available for parking brakes: Rod Linkage. Hand or Foot Lever. Cable Linkage. For detail information concerning these linkage systems, special designs are available upon request. 7 x 1-3/4 BRAKE Part #'s 519538 ( R.H.) & ( L.H.)

Includes mounting hardware. Used on front or rear wheels. Actuated by 518847 lever and 8194 cable linkage or by drawbar Weight each 5 lbs.

12 X 2 HYDRAULIC BRAKE Part #'s 518169 (R.H.) 518168 (L.H.)

q q

Includes mounting hardware. Nominal Stopping Capacity: 5,000 lbs. per axle with 15" tires. Not to be used with surge actuator. See hydraulic line and fitting kits. Wheel cylinder diameter of 11/8." Weight each 14.5 lbs.

**Actuate with 518680 air over hydraulic kit or 518668 vacuum over hydraulic kit**

12 X 2 PARKING BRAKE Part #'s 518171 (R.H.) 518170 (L.H.) Same as above but with internal parking brake lever.
Use with 8423 lever and cable linkage.

file:///D|/My%20Documents/My%20Webs2/Hadco/Brakes%20-%20Parking&Service.htm (1 of 2) [7/30/01 11:03:12 PM]

Brakes - Parking&Service

12 X 3 HYDRAULIC BRAKE
W/O Parking Brake Part #'s 518176 (R.H.) 518177 (L.H.) With Parking Brake Part #'s 518178 (R.H.) 518179 (L.H.)

q q

Includes mounting hardware. Nominal stopping capacity: 7,500 lbs. with 15" tires.

q q q

Use with vacuum over hydraulic actuation. With or without parking brake lever. Weight each 32 lbs.

file:///D|/My%20Documents/My%20Webs2/Hadco/Brakes%20-%20Parking&Service.htm (2 of 2) [7/30/01 11:03:12 PM]

Drawbars

DRAWBARS
All drawbars, unless otherwise specified are assembled with either 28000, 28002 or 28093 lunette eyes. Drawbar standard lengths are 48" and 72". Telescoping, detachable and additional lengths are available on special orders. Drawbar latches are available on all units.

"L" TYPE

L 48" 72" *48" *72"

W/Latch 551005 551007 551565 551566

WO/Latch 551330 551333

Tube Dia. 3' 3' 3' 3'

A 3-1/2 3-1/2 3-1/2 3-1/2

* Brake activating drawbar.

TYPE "M"

L 48" 72"

W/Latch 551345 551346

WO/Latch 551347 551348

Tube Dia. 3" 3"

A 3" 3"

TYPE "H"

L 48" 72" 48" 72" 48" 72" *48" *72"

W/Latch 551036 551037 551055 551057 551080 551082 551006 551564

WO/Latch 521034 551035 551069 551071 551084 551086 551010 551012

Tube Dia. 4" 4" 4" 4" 4" 4" 4" 4"

Pivot Set 549064 549064 549065 549065 549071 549071 549071 549071

A 4" 4" 4" 4" 4" 4" 4" 4"

* Surge brake.

TYPE "D"

L 48" 72" *48" *72"

W/Latch 551060 551062 551038 551039

WO/Latch 551341 551340 551024 551027

Tube Dia. 4" 4" 4" 4"

A 5-3/8 5-3/8 5-3/8 5-3/8

* Surge brake.

file:///D|/My%20Documents/My%20Webs2/Hadco/Drawbars.htm [7/30/01 11:03:20 PM]

Hub Series - 120

120 SERIES HUBS

q

CAPACITY PER AXLE: r 12,000 LBS, HIGHWAY SERVICE r 18,000 LBS AT 5 MPH

q q q

REFER TO TECHNICAL INFORMATION BRAKES AVAILABLE: SEE BELOW. WEIGHT PER HUB: - 35 LBS.

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13NS 14NS 15NS 16NS 17 18 19

CODE # 523393 523392 523438 523439 516060 549300 516011 523134 523117 523118 523094 523096 523332 523333 523446 523447 523442 523443 523014

DESCRIPTION Wheel bolt (Hub&Drum) LH** Wheel bolt (Hub&Drum) RH** Single Wheel Nut 3/4 - 16 LH ** Single Wheel Nut 3/4 - 16 RH** Key Washer * Spindle Nut 1-1/4-12 * Cotter Pin 3/16x2-1/2* Grease Cap Outer Cup (25520) Outer Cone (25590) Inner Cup (JLM10910) Inner Cone (JLM710949) Wheel Bolt (hub only) LH ** Wheel Bolt (hub only) RH ** Dual Wheel Spacer LH ** Dual Wheel Spacer RH ** Dual Wheel Nut 1-1/8-16 LH Dual Wheel Nut 1-1/8-16 RH Grease Seal

*Furnished as part of axle or spindle. *LH studs on LH side of vehicle; RH studs on RH side.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_120_Series.htm [7/30/01 11:03:22 PM]

Hub Series - 120 part-2

120 SERIES HUBS

HUB AND WHEEL COMBINATIONS
Bolt Circle Wheel Hub Replacement R.H. L.H. 521054 521060 521066 521072 521053 521059 521067 521073 Hub Complete R.H. L.H. 521056 521062 521068 521074 521055 521062 521069 521075

5 on 8 6 on 8-3/4

Single Dual Single Dual

Hub replacement consists of hub, bearing cups, wheel bolts and cone nuts. Hub complete consists of plus bearing cones, grease seal and cap.

HUB, DRUM, BRAKE AND WHEEL COMBINATIONS

Bolt Circle Brake Used Wheel Sizes Type Wheel Brake Drum Single Dual Single Dual Single Dual Single Dual Single Dual Single Dual 524908 524908 524234 524234 524190 524190 524910 524910 524236 524236 524194 524194 Hub & Drum Replacement R.H 12x3 Parking 5 on 8 12-1/4x5-1/2 Electric 15x4 Hydraulic 12x3Parking 6 on 8-3/4 12-1/4x5-1/2 Electric 15x4 Hydraulic 15, 16, 20 15*, 16, 20 20 15, 16, 20 15*, 16, 20 20 525526 525546 525252 525268 525248 525264 525528 525548 525284 525300 525280 525296 L.H. 525527 525547 525253 525269 525249 525265 525529 525549 525285 525301 525281 525297 Hub & Drum Complete R.H. 525542 525550 525254 525270 525250 525266 525544 525552 525286 525302 525282 525298 L.H. 524543 525551 525255 525271 525251 525267 525545 525553 525287 525303 525283 525299

* Use tube with metal stem on 15 inch S.D.C. dual wheels. Hub and drum replacement consists of hub, drum, bearing cups, wheel bolts and cone nuts. Hub and Drum complete consists of bearing cones, grease seal and grease cap.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_120_Series2.htm [7/30/01 11:03:24 PM]

Hub Series - 2R

2R SERIES HUBS
5 BOLTS ON 4-1/2" BOLT CIRCLE *
q q q q

CAPACITY PER AXLE: 2,500 LBS HIGHWAY SERVICE REFER TO TECHNICAL INFORMATION FOR LOW SPEED SERVICE. BRAKES AVAILABLE: 7 x 1-3/4 PARKING OR 12 x 2 PARKING 12 x 2 HYDRAULIC OR ELECTRIC SERVICE WEIGHT PER HUB: 6 LBS.

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CODE # 523038 523029 (Not Used) 516050 516003 516074 523046 523036 523025 523434 523300 523361 523044 516032 523607

DESCRIPTION Inner Cone (L68149) Inner Cup (L68111) Snap Ring Key Washer * Cotter Pin*1/8 x1-1/2 Spindle Nut Grease Cap Outer Cone (LM12749) Outer Cup (LM12711) Cone Nut, 1/2-20 Wheel Bolt (Hub Only) Wheel bolt (Hub&Drum Grease Seal Z Ring * O Ring *

* Furnished as part of axle or spindle.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_2R_Series.htm [7/30/01 11:03:26 PM]

Hub Series - 2R part-2

5 BOLTS ON 4-1/2" BOLT CIRCLE * HUB AND WHEEL COMBINATIONS

Bolt Circle Wheel 540402 540000 540015 540027 540048 540089 Wheel Size 8x4-1/4 9x4 13x4-1/2 14x5 15x5 15x6 Wheel Type F.B. F.B. D.C. D.C. D.C. D.C. Hub Replacement 525554 Hub Complete 525555

5on 4-1/2

21003

521004

Hub replacement consists of hub and items 2,3,9,10 and 11. Hub complete consists of and items 1,8 and 13.

HUB, DRUM, BRAKE AND WHEEL COMBINATIONS

Bolt Circle

Brake Used 7x1-3/4 w/parking

Wheel

Wheel Size

Wheel Type F.B. F.B. D.C. D.C. D.C. D.C.

Brake Drum 24899 24899

5on4-1/2

540402 8x4-1/2 540000 9x4 540015 13x4-1/2 540027 14x5 540028 15x5 12x2 hyd w/parking 540089 15x6 12x2 elect

Hub & Hub Drum & Drum Replacement Complete 525432 525433 525434 525435

24054

525436

525437

Hub and drum replacement consists of hub and drum and items 2, 3, 9, 10 and 12.. Hub and Drum complete consists of and items 1, 7, 8 and 13.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_2R_Series2.htm [7/30/01 11:03:28 PM]

Hub Series - 3140

3140 SERIES HUBS

5 CONE BOLTS ON 4-1/2" BOLT CIRCLE
q q

CAPACITY PER AXLE: 8,000 LBS AT 5 M.P.H. REFER TO TECHNICAL INFORMATION

q q

BRAKES AVAILABLE: 7" x 1-3/4" PARKING WEIGHT PER HUB: 11 LBS.

ITEM
1 2 3 4 5 6 7 8 9 10 11 12 13

CODE #
15961 523085 523079 523065 516074 516003 523045 516050 523039 523031 523436 523307 523309

DESCRIPTION
Sleeve Grease Seal Inner Cone(LM529749) Inner Cup (LM529710) Spindle Nut * Cotter Pin * Grease Cap Key Washer * Outer Cone (LM512649) Outer Cup(LM512610) Cone Nut 1/2-20 Wheel Bolt (Hub Only) Wheel Bolt (Hub&Drum

* Furnished as part of axle or spindle.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_3140_Series.htm [7/30/01 11:03:29 PM]

Hub Series - 3140 part-2

3140 SERIES HUBS Part-2

5 CONE BOLTS ON 4-1/2" BOLT CIRCLE HUB AND WHEEL COMBINATIONS
Bolt Circle 5 on 4-1/2 Wheel 540402 540000 Wheel Size 8x4-1/4 9x4 Wheel Type F.B. F.B. Hub Replacement 522458 Hub Complete 522460

Hub replacement consists of hub and items 4, 10, 11 and 12. Hub complete consists of and items 2, 3, 7 and 9. Wheel Type F.B. F.B. Brake Drum 524899

HUB, DRUM, BRAKE AND WHEEL COMBINATIONS

Bolt Circle Brake Used Wheel 540402 540000 Wheel Size 8x4-1/4 9x4 Hub &Drum Replacement 525430 Hub & Drum Complete 525431

5 on 4-1/2 7x1-3/4parking

Hub replacement consists of hub and drum and items 4, 10, 11 and 13. Hub and Drum complete consists of and items 2, 3, 7, and 9.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_3140_Series2.htm [7/30/01 11:03:30 PM]

Hub Series - 385

385 SERIES HUBS

5 BOLTS ON 5-1/2" BOLT CIRCLE
q q q q

CONFORMS TO MIL-W-8005, MS24328-1 CAPACITY PER AXLE: 9,000 LBS AT 5 MPH / 7,800 LBS AT 10 MPH REFER TO TECHNICAL INFORMATION BRAKES AVAILABLE: 7 x 1-3/4 PARKING, 12 x 2" PARKING & 12 x 2" SERVICE HYDRAULIC OR ELECTRIC WEIGHT PER HUB: 11-1/2 LBS

ITEM CODE #
1 2 3 4 5 6 7 8 9 10 11 12 13 523253 523137 523139 516054 523255 516005 516084 523003 523009 549263 549245 523313 523381

DESCRIPTION
Seal Inner Cup (24720) Inner Cone (24780) Key Washer * Grease Cap Cotter Pin * Nut Spindle * Outer Cup (15245) Outer Cone (15123) Nut Lock Washer Wheel Bolt ( Hub Only) Wheel Bolt (Hub&Drum)

* Furnished as part of axle or spindle.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_385_Series.htm [7/30/01 11:03:32 PM]

Hub Series - 385 part-2

385 SERIES HUBS

5 BOLTS ON 5-1/2" BOLT CIRCLE HUB AND WHEEL COMBINATIONS
Bolt Circle 5 on 5-1/2 Wheel 540406 540409 540000 Wheel Size 9x4 10x5-1/2 9x4 Wheel Type F.B. F.B. F.B. Hub Replacement 524482 Hub Complete 521246

Hub replacement consists of hub and items 2, 8, 10, 11 AND 12. Hub complete consists of and items 1, 3, 5 and 9.

HUB, DRUM, BRAKE AND WHEEL COMBINATIONS

Bolt Circle Brake Used 7x1-3/4 parking 12x2 elect or hyd. w/parking Wheel 540406 540409 540000 540406 540409 540000 Wheel Size 9x4 10x5-1/2 9x4 9x4 10x5-1/2 9x4 Wheel Type Brake Drum F.B. F.B. F.B. F.B. F.B. F.B. Hub&Drum Replacement Hub&Drum Complete

5 on 5-1/2

524891 524079

525494 525486

525485 525487

Hub and drum replacement consists of hub and drum and items 2, 8, 10, 11 and 13. Hub and drum complete consists of and items 1, 3, 5 and 9.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_385_Series2.htm (1 of 2) [7/30/01 11:03:34 PM]

Hub Series - 390

390 SERIES HUBS

5 BOLTS ON 4-1/2" BOLT CIRCLE
q q

q q

CONFORMS TO MIL-W-8005, MS24327-1 CAPACITY PER AXLE: 5 M.P.H - 2460 LBS/10 M.P.H.- 2060 LBS REFER TO TECHNICAL INFORMATION FOR LOW SPEED SERVICE. BRAKES AVAILABLE: 7 x 1-3/4 PARKING WEIGHT OF COMPLETE HUB: 4-1/2 LBS.

ITEM 1 2 3 4 5 6 7 8 9 10 11 12

CODE #

DESCRIPTION

523243 Seal 523003 Inner Cup (15245) 523009 Inner Cone (15123) 516001 Outer Cup (09195) 516005 Outer Cone (09067) 523245 Grease Cap 523385 Wheel Bolt,3/8-24 519660 Lock Washer,3/8 519671 Nut,3/8-24 516048 Key Washer * 516001 Cotter Pin * 516070 Nut Hex Slotted * * Furnished as part of axle or spindle.

HUB AND WHEEL COMBINATIONS

Bolt Circle 5on 4-1/2 Wheel 540400 540403 533150 Wheel Size 6x3-1/4 8x3-3/4 8x3-3/4 Wheel Type F.B. F.B. D.C. Hub Complete 522890

Hub complete consists of hub and items 1 thru 9.

HUB, DRUM, BRAKE AND WHEEL COMBINATIONS

Bolt Circle 5 on 4-1/2 Brake Used 7x1-3/4 parking Wheel 540403 533150 Wheel Size 8x3-3/4 8x3-3/4 Wheel Type F.B. D.C. Brake Drum 524893 and drum. Hub & Drum Complete 525429

Hub and drum complete consists of

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_390_Series.htm [7/30/01 11:03:36 PM]

Hub Series - 42

42 SERIES HUB
6 BOLT ON 5.5" BOLT CIRCLE
q q

CAPACITY PER AXLE: 5,200 HIGHWAY SERVICE REFER TO TECHNICAL INFORMATION FOR LOW SPEED SERVICE.

ITEM 1 2 3 4 5 6 7 8 9

CODE # 522673 523131 523017 523121 523111 523047 523255 523307 523434

DESCRIPTION Hub (Complete) Inner Cone 25580 Inner Cup 25520 Outer Cone LM-67048 Inner Cup LM-67010 Grease Seal Grease Cap Stud Cone Nut

ITEM 1 2 3 4 5

CODE # 516481 516030 516054 516082 516003

DESCRIPTION Spindle (Complete) Z-Ring Key Washer Spindle Nut Cotter Pin

How To Order
1.Complete Hub Package with standard component parts use specified code number. 2.Complete Spindle Package with standard component parts use specified code number. 3.Separate component parts use specified code number.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_42_Series.htm [7/30/01 11:03:38 PM]

Hub Series - 5R

5R SERIES HUBS
5&6 CONE BOLTS ON 5-1/2" BOLT CIRCLE
q q q q q

CAPACITY PER AXLE: 5,200 LBS HIGHWAY SERVICE REFER TO TECHNICAL INFORMATION FOR LOW SPEED SERVICE E.T.C. BRAKES AVAILABLE: 12 x 2" PARKING & 12 x 2" HYDRAULIC OR ELECTRIC WEIGHT PER HUB: 11-1/2 LBS WEIGHT PER HUB & DRUM: 36 LBS.

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13

CODE # 523420 516033 523114 523122 516054 516003 523135 523111 523121 516082 Not Used 523602 523606

DESCRIPTION Cone Bolt Z Ring * Inner Cup (LM501310) Inner Cone (LM501349) Key Washer * Cotter Pin * Grease Cap Outer Cup (LM67010) Outer Cone (LM67048) Spindle Nut 1-14 * Snap Ring Grease Seal O Ring *

* Furnished as part of axle or spindle.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_5R_Series.htm [7/30/01 11:03:40 PM]

Hub Series - 5R part-2

5R SERIES HUBS
5&6 CONE BOLTS ON 5-1/2" BOLT CIRCLE
HUB AND WHEEL COMBINATIONS
Bolt Circle Wheel 540042 540079 540088 540091 540152 540208 Wheel Size 14.5x6 15x5-1/2 15x6 15x6 15x5-1/2 16x6 Wheel Type D.C. D.C. D.C. D.C. S.D.C. S.D.C. Hub Replacement Hub Complete

6 on 5-1/2 5 on 5-1/2

521301

521300 522212

Hub replacement consists of hub and items 1, 3, 8 and11. Hub complete consists of and items 4, 7, 9 and 12. Brake Drum

HUB, DRUM, BRAKE AND WHEEL COMBINATIONS

Bolt Circle Brake Used Wheel 540042 540079 540088 540091 540152 540208 Wheel Size Wheel Type 14.5x6 15x5-1/2 15x6 15x6 15x5-1/2 16x6 D.C. D.C. D.C. D.C. S.D.C. S.D.C. Hub & Drum Replacement Hub & Drum Complete

6 on 5-1/2

12x2 hyd w/ park 12x2 elect

526301

526300

Hub replacement consists of hub and items 1, 3, 8 and11. Hub complete consists of and items 4, 7, 9 and 12.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_5R_Series2.htm [7/30/01 11:03:42 PM]

Hub Series - 7M

7M SERIES HUBS
q q q

5 BOLTS ON 8" BOLT CIRCLE 6 BOLTS ON 8-3/4" BOLT CIRCLE 8 BOLTS ON 6-1/2" BOLT CIRCLE CAPACITY PER AXLE: 7,000 LBS HIGHWAY SERVICE REFER TO TECHNICAL INFORMATION FOR LOW SPEED SERVICE. BRAKES AVAILABLE: 12 x 2 PARKING 12 x 3 HYDRAULIC PARKING AND SERVICE DISC TYPE HYDRAULIC SERVICE. WEIGHT PER HUB: 25 LBS.

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

CODE # 523161 523163 516054 516003 523145 516080 523003 523009 523438 523439 523393 523392 523165

DESCRIPTION

Inner Cup (3525) Inner Cone (3578) Key Washer * Cotter Pin * Grease Cap Spindle Nut * Outer Cup (15245) Outer Cone (15123) Single Wheel Nut LH Single Wheel Nut RH Wheel bolt (Hub&Drum) Wheel bolt (Hub&Drum) Grease Seal Hex Head Cap Screw 7/8-14x1549319 1/2 549249 Lock Washer 7/8 523332 Wheel Bolt Hub Only LH 523333 Wheel Bolt Hub Only RH * Furnished as part of axle or spindle.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_7M_Series.htm [7/30/01 11:03:44 PM]

Hub Series - 7M part-2

7M SERIES HUBS
5 BOLTS ON 8" BOLT CIRCLE 6 BOLTS ON 8-3/4" BOLT CIRCLE 8 BOLTS ON 6-1/2" BOLT CIRCLE

HUB AND WHEEL COMBINATIONS

Bolt Circle 5 on 8 6 on 8-3/4 Wheel Dual Type Single Hub Replacement R.H. L.H. 522246 522247 522254 522253 Hub Complete R.H. L.H. 522248 522249 522256 522255

Hub replacement consists of hub and items 1,7,9 or 10 and 16 or 17. Hub complete consists of and items 2, 5, 8 and 13.

HUB, DRUM, BRAKE AND WHEEL COMBINATIONS

Bolt Circle Brake Used Wheel Sizes Brake Drum 524112 524908 524114 524908 Hub & Drum Replacement R.H L.H. 525800 525801 525502 525004 525504 525506 hub 525503 525001 525505 525507 hub Hub & Drum Complete R.H. L.H. 525802 525803 525508 525006 525510 525512 hub 525509 525003 525511 525513 hub

Dual Type Single 5 on 8 12x2 parking 15 16 20 12x3 hyd 15 16 20 w/parking 12x2 6 on 8-3/4 15 16 20 parking 12x3 hyd 15 16 20 w/parking 5 on 8 Disc 15 16 20

Hub and drum replacement for 12x2 brake consists of hub and 12x2 drum and items 1, 7, 9, or 10 and 11 or 12. For 12x3 brake consists of hub and 12x3 drum and items 1, 7, 9 or 10, 14, 15 and 16 or 17. Hub and Drum complete consists of and items 2, 5, 8 and 13. Disc not included.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_7M_Series2.htm [7/30/01 11:03:46 PM]

Hub Series - 84

84 SERIES HUB
5 BOLT ON 4.5" BOLT CIRCLE
q q

CAPACITY PER AXLE: 3,500 HIGHWAY SERVICE REFER TO TECHNICAL INFORMATION FOR LOW SPEED SERVICE.

ITEM 1 2 3 4 5 6 7 8 9

CODE # 522670 523038 523029 523017 523063 523049 523206 523307 523434

DESCRIPTION Hub (Complete) Inner Cone 25580 Inner Cup 25520 Outer Cone LM-67048 Inner Cup LM-67010 Grease Seal Grease Cap Stud Cone Nut

ITEM 1 2 3 4 5

CODE # 516477 516035 516054 516082 516003

DESCRIPTION Spindle (Complete) Z-Ring Key Washer Spindle Nut Cotter Pin

How To Order 1.Complete Hub Package with standard component parts use specified code number. 2.Complete Spindle Package with standard component parts use specified code number. 3.Separate component parts use specified code number.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_84_Series.htm [7/30/01 11:03:48 PM]

Hub Series - 85

85 SERIES HUBS
q q q q

CAPACITY PER AXLE, HIGHWAY SERVICE: r 7,000 LBS ON 2-1/4 SQ. AXLE. r 8,500 LBS ON 2-1/2 SQ. AXLE REFER TO TECHNICAL INFORMATION FOR LOW SPEED SERVICE. BRAKES AVAILABLE: SEE BRAKES PAGE. WEIGHT PER HUB: r 8 0N 6-1/2 - 20 LBS. r 5 ON 8 - 23 LBS. r 6 ON 8-3/4 - 25 LBS.

ITEM CODE # 1 2 3 4 5 523393 523392 523438 523439 516054 DESCRIPTION Wheel bolt (Hub&Drum) 3/4 -16 LH Wheel bolt (Hub&Drum) 3/4 - 16 RH Single Wheel Nut 3/4 - 16 LH Single Wheel Nut 3/4 - 16 RH Key Washer

516080

Spindle Nut 1-14

7 8 9 10 11 12 13 14

516003 523136 523003 523009 523098 523100 523010 523364

Cotter Pin * Grease Cap Outer Cup (15245) Outer Cone (15123) Inner Cup (JLM-104910) Inner Cone (JLM-104948) Grease Seal (TROSTAL- 02BR324-224-04) Wheel Bolt 1/2-20 (Hub&Drum,single)

15

523361

Wheel Bolt 1/2-20 (Hub only,single)

16 NS NS NS NS NS NS NS NS NS NS

523434 523332 523333 523446 523447 523442 523443 523801 523802 523431 523430 --

Cone Nut 1/2-20 (single) Wheel Bolt (hub only) LH Wheel Bolt (hub only) RH Dual Wheel Spacer LH Dual Wheel Spacer RH Dual Wheel Nut 1-1/8-16 LH Dual Wheel Nut 1-1/8-16 RH Wheel Bolt LH 5/8-18 (hub & drum, dual) Wheel Bolt RH 5/8-18 (hub & drum, dual) Cone Nut LH 5/8-18 (dual) Cone Nut RH 5/8-18 (dual) Drums SEE CHART

Furnished as part of axle or spindle. Used On Hubs 8 on 6-1/2 B.C. Available on special order.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_85_Series.htm [7/30/01 11:03:50 PM]

Hub Series - 85 part-2

85 SERIES HUBS
HUB AND WHEEL COMBINATIONS
Bolt Circle Wheel Single Dual Single Dual Single Dual Hub Replacement R.H. L.H. 522862 522818 522864 522836 522866 522838 Hub Complete R.H. L.H. 522878 522826 522880 522828 522882 522846 522878 522825 522881 522827 522883 522845

8 on 6-1/2 5 on 8 6 on 8-3/4

522817 522865 822835 522867 522837

Hub replacement consists of hub, bearing cups, wheel bolts and nuts. Hub complete consists of hub replacement plus bearing cones, grease seal and grease cap.

HUB, DRUM, BRAKE AND WHEEL COMBINATIONS

Bolt Circle Brake Used Wheel Sizes Type Wheel
12-1/4x3-1/2 Electric 12-1/4x3 Hydraulic 8 on 6-1/2 12x3 Parking 12-1/4x3-1/2 Electric 12-1/4x3 Hydraulic 5 on 8 12x3Parking 12-1/4x3-1/2 Electric 12-1/4x3 Hydraulic 12x3 Parking Single 16 16.5 Dual 16 16.5 Single Dual Single 15,16,20 Dual 15, 16, 20 15, 16, 20 Single Dual Single 15, 16, 20 Dual 15, 16, 20 15, 16, 20 Single Dual 524902 524910 524910 525470 525424 525474 525471 525425 525475 525472 525426 525476 525473 525427 525477 524903 524908 524908 524902 525458 525412 525462 525420 525459 525413 525463 525421 525460 525414 525464 525422 525461 525415 525465 525423 524300 524907 524911 524903 525450 525404 525454 525408 525451 -525455 525409 525452 525406 525456 525410 525453 -525457 525411

Brake Drum
524301

Hub & Drum Replacement R.H L.H.

524500 --

Hub & Drum Complete R.H. L.H.

525402 --

6 on 8-3/4

Use tube with metal stem on 15 inch S.D.C. dual wheels. Hub and drum replacement consists of hub, drum, bearing cups, wheel bolts and nuts. Hub and Drum complete consists of hub and drum replacement plus bearing cones, grease seal and grease cap.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_85_Series2.htm [7/30/01 11:03:53 PM]

Hub Series - BT

BT SERIES HUBS
4 CONE BOLTS ON 4" BOLT CIRCLE 5 CONE BOLTS ON 4-1/2" BOLT CIRCLE
q q

q q

CAPACITY PER AXLE: 1,800 HIGHWAY SERVICE REFER TO TECHNICAL INFORMATION FOR LOW SPEED SERVICE. BRAKES AVAILABLE: 7 x 1-3/4 PARKING WEIGHT OF COMPLETE HUB: 4 LBS.

ITEM 1 2 3 4 5 6 7 8 9 10

CODE #

DESCRIPTION

523601 Seal 523063 Bearing Cup 523017 Bearing Cone 516074 Spindle Nut * 516003 Cotter Pin * 533206 Grease Cap 516050 Keywasher * 533210 Cone Bolt 516034 Z-Ring, BT * 523605 O-Ring * * Furnished as part of axle or spindle.

HUB, DRUM, BRAKE AND WHEEL COMBINATIONS

Bolt Circle 4 on 4 5 on 4-1/2 Brake Used 7x1-3/4 parking Wheel 535150 535152 Wheel Size 8x3-3/4 12x4 Wheel Type D.C. D.C. Brake Drum Demountable 524894 Hub Replacement 533001 Hub Complete 533003 522889

Hub replacement consists of hub and items 2 and 8. Hub complete consists of hub replacement and items 1, 3 and 6.

file:///D|/My%20Documents/My%20Webs2/Hadco/Hub_BT_Series.htm [7/30/01 11:03:55 PM]

Lunette Eyes

LUNETTE EYES
528000 Hollow Lunette Eye
q

q q

Capacity - 15,000 lbs. Gross Trailer Weight w/hinged drawbar. Conforms to Ordinance Dwg. B7041347 Weight - 3.5 lbs.

528002 Solid Lunette Eye

q

q q

Capacity - 30,000 lbs. Gross Trailer Weight w/hinged drawbar. Conforms to Ordinance Dwg. B7041347 Weight - 9 lbs.

528093 Lunette Eye

q q

Capacity - 30,000 lbs. Gross Trailer Weight Weight - 10 lbs.

528095 Lunette Eye

q q

Capacity - 28,000 lbs. Gross Trailer Weight Weight - 22 lbs.

file:///D|/My%20Documents/My%20Webs2/Hadco/Lunette_Eyes.htm [7/30/01 11:03:56 PM]

Mounting Blocks

TIE DOWN RING MOUNTING BLOCKS

528020 Mounting Block
q q q

Fits 528012 & 52814 tie down rings. Conforms to commercial standard. Weight - 2.25 lbs.

528022 Mounting Block

q q q

Fits 528012 & 52814 tie down rings. Conforms to Air Force drawing #54B6236. Weight - .75 lbs.

file:///D|/My%20Documents/My%20Webs2/Hadco/Mounting_Blocks.htm [7/30/01 11:03:58 PM]

Pintle Hooks

PINTLE HOOKS
528095 Pintle Hook

q q q

Capacity - 10,000 lbs. Gross Trailer Weight SAE Rating. Locking pin & chain included. Weight - 6.5 lbs.

528056 Pintle Hook

q q q q q

Capacity - 30,000 lbs. Gross Trailer Weight SAE Rating. Locking pin & chain included. Conforms to MS 51335-2 Conforms to Ordinance #C8380198 Weight - 10 lbs.

file:///D|/My%20Documents/My%20Webs2/Hadco/Pintle_Hooks.htm [7/30/01 11:03:59 PM]

Reflectors

REFLECTORS
528030 Red
q q

3" Glass conforms to MS 35387-2

528030 Amber
q q q

3" Glass conforms to MS 35387-2. Weight - .19 lbs

file:///D|/My%20Documents/My%20Webs2/Hadco/Reflectors.htm (1 of 2) [7/30/01 11:04:01 PM]

Running Gear - Light-Duty

LIGHT DUTY RUNNING GEAR

TRAILER TYPE L Capacities from 500 to 4,000 lbs. per axle, front mounted tie-rods.
The type "L" unit is normally used where low initial cost and design simplicity are of paramount importance.

This type "L" front steering axle is especially suited for low speed interplant and low speed runway type use.

Typical corresponding rear axle for type "L" front axle. Many different types of springs, brakes, hubs, wheels and tires are available for this front and rear axle assembly. Different capacity rear and front axles may be used when necessary.

TYPE "L" RUNNING GEAR - LAYOUT DATA

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Light_Duty.htm [7/30/01 11:04:02 PM]

Running Gear - Light-Duty part-2

LIGHT DUTY RUNNING GEAR

TRAILER TYPE L SOME SAMPLE RUNNING GEAR COMBINATIONS
TIRE 4.10/3.50X6 4.80/4.00X8 4.80/4.00X8 6.90/6.00X9 6.90/6.00X9 7.50X10 7.50X10 7.75X15 WHEEL 540400 540403 540403 540406 540406 540409 540409 540448 HUB 522890 522890 525429 525483 525487 525483 525487 521004 HUB& DRUM FTR&RR BRAKE NONE NONE 519538 NONE 519538 NONE 519538 NONE K T-13 T-12-1/8 T-20-5/8 T-13 T-20 T-13 T-20 T-13 S T-19 T-20 T-22 T-24 T-25 T-26-1/2 T-29 T-29 W T+4-1/4 T+5 T+5 T+6-1/2 T+8-5/8 T+8-5/8 T+8-5/8 T+8 R T-9 T-9 T-12 T-11 T-18 T-14 T-18 T-14

SELECTION PROCEDURE
1. Check quotation specification drawings 2. Tire size 3. Axle size and spindles 4. Springs and fittings 5. Wheels 6. Parking brakes 7. Service brakes 8. Brake drums 9. Hubs 10. Parking Brake Linkages 11. Service brake actuating systems 12. Drawbars 13. Chassis accessories such as: tie-downs, reflectors, lunnette eyes, pintle hooks, etc.

DESIGN NOTES
When a drawbar latch is required the tongue length must be sufficient so that the drawbar is attached in front of the frame. MIL-M-8090 requires the drawbar to be raised at any possible cramping or turning angle of the tongue.

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Light_Duty2.htm (1 of 2) [7/30/01 11:04:04 PM]

Running Gear - Medium-Duty

MEDIUM DUTY RUNNING GEAR

TRAILER TYPE H Capacities from 3,000 to 12,000 lbs. per axle, front mounted tie-rods.

The type "H" combines the major advantages of both type "L" and type "M" units, such as simplicity of design, low maintenance costs, ease of handling and great adaptability. Type "H" is especially well engineered for heavy duty, rough terrain and extended service life.

This type "H" front steering axle is suited for all speeds, both on and off the highway, on smooth, rough and extremely rough terrain. The type to order if your unit will encounter rough military or heavy commercial use.

Typical corresponding rear axle for type "H" front axle. Many different types of springs, brakes, brake systems, hubs, wheels and tires are available for this front and rear axle assembly. Different capacity rear and front axles may be used when necessary.

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Medium%20Duty.htm [7/30/01 11:04:06 PM]

Running Gear - Medium-Duty part-2

MEDIUM DUTY RUNNING GEAR

TYPE "H" RUNNING GEAR - LAYOUT DATA

SOME SAMPLE RUNNING GEAR COMBINATIONS

TIRE 5.00X8 5.00X8 6.90/6.00X9 6.90/6.00X9 7.50X10 7.50X10 7.50X10 7.50X10 WHEEL 540402 540402 540406 540406 540409 540409 540409 540958 --525483 525487 525487 525500-1 525483 525487 HUB 522460 525431 HUB& DRUM FRNT&RR BRAKE NONE 519538 NONE 519538 NONE 519538 519570-1 519739 519741 9.00X10 9.00X10 9.00X10 7.50X15 9.00X15 7.50X15 540409 540409 540409 540291 540390 540291 525483 525487 525487 525410-1 525410-1 525414-5 NONE 519536 519570-1 519830-1 519830-1 518178 518179 T-17 T-19-1/2 T-22 T-23-7/8 T-23-7/8 T-18-7/8 T-31 T-31 T-32 T-35 T-38 T-34 T+9-1/2 T+9-1/2 T+9-1/2 T+7-5/8 T+7-5/8 T+7-7/8 T-14 T-17 T-21 T-22 T-22 T-18 K T-13-13/16 T-19-5/16 T-14-1/2 T-19-1/2 T-16 T-19-1/2 T-22 T-21-1/2 S T-22 T-23 T-24 T-26 T-29 T-29 T-30 T-30 W T+6 T+6 T+6-1/2 T+6-1/2 T+8-1/2 T+8-1/2 T+8-1/2 T+9-1/2 R T-11 T-18 T-12 T-17 T-13 T-17 T-15 T-27

DESIGN NOTES
When a drawbar latch is required the tongue length must be sufficient so that the drawbar is attached in front of the frame. MIL-M-8090 requires the drawbar to be raised at any possible cramping or turning angle of the tongue.

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Medium_Duty2.htm [7/30/01 11:04:07 PM]

Running Gear - Medium Duty part-3

MEDIUM DUTY RUNNING GEAR

TRAILER TYPE M Capacities from 500 to 7,000 lbs. per axle, rear mounted tie-rods.

The type "M" unit is specified for simplicity of design, low maintenance costs, ease of handling and ability to adapt itself readily to many diversified units.

This type "M" front steering axle is designed for both low and high speed equipment where the load is in the medium field; also readily adaptable as a front steering axle for a self-propelled unit.

Typical corresponding rear axle for type "M" front axle. Many different types of springs, brakes, brake systems, hubs, wheels and tires are available for this front and rear axle assembly. Different capacity rear and front axles may be used when necessary.

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Medium_Duty3.htm [7/30/01 11:04:09 PM]

Running Gear - Medium Duty part-4

MEDIUM DUTY RUNNING GEAR

TYPE "M" RUNNING GEAR - LAYOUT DATA

SOME SAMPLE RUNNING GEAR COMBINATIONS

TIRE 4.80/4.00X8 4.80/4.00X8 6.90/6.00X9 6.90/6.00X9 7.50X10 7.50X10 9.00X10 9.00X10 7.50X15 7.50X15 WHEEL 540403 540403 540406 540406 540409 540409 540409 540409 540294 540294 HUB 522890 525429 525483 525483 525483 522248-9 525485 525802-3 525485 525485 HUB& DRUM FTR&RR BRAKE NONE 519538 NONE 519538 NONE 519538 NONE 519538 NONE 518170-1 K T-10 T-13-1/4 T-10-1/2 T-17-1/2 T-10-3/4 T-17-1/2 T-10-3/4 T-17-3/4 T-10 T-12 S T-18-1/2 T-19 T-23 T-24-1/2 T-27 T-29 T-28-1/2 T-30 T-31 T-31-1/4 W T+5 T+5 T+6-1/2 T+6-1/2 T+8-5/8 T+8-5/8 T+9-1/2 T+9-1/2 T+12-3/4 T+12-3/4 R T-9 T-12 T-11 T-16 T-13 T-16 T-13-1/2 T-16 T-13 T-13

SELECTION PROCEDURE

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Medium_Duty4.htm (1 of 2) [7/30/01 11:04:11 PM]

Running Gear - Medium Duty part-4

1. Check quotation specification drawings 2. Tire size 3. Axle size and spindles 4. Springs and fittings 5. Wheels 6. Parking brakes 7. Service brakes

8. Brake drums 9. Hubs 10. Parking Brake Linkages 11. Service brake actuating systems 12. Drawbars 13. Chassis accessories such as: tie-downs, reflectors, lunnette eyes, pintle hooks, etc.

DESIGN NOTES
When a drawbar latch is required the tongue length must be sufficient so that the drawbar is attached in front of the frame. MILM-8090 requires the drawbar to be raised at any possible cramping or turning angle of the tongue.

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Medium_Duty4.htm (2 of 2) [7/30/01 11:04:11 PM]

Running Gear - Heavy-Duty

HEAVY DUTY RUNNING GEAR

TRAILER TYPE D Capacities to 18,000 lbs. per axle, front mounted tie-rods. Type "D" running gear is designed for heavy loads in rugged service and off-highway use.

The type "D" front steering axle is suited for all speeds, both on and off the highway, on smooth, rough and extremely rough terrain. The type to order if your unit will encounter rough military or heavy commercial type use, requiring capacities exceeding type "H" running gear.

Typical corresponding rear axle for type "D" front axle. Many different types of springs, brakes, brake systems, hubs, wheels and tires are available for this front and rear axle assembly. Different capacity rear and front axles may be used when necessary.

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Heavy_Duty.htm [7/30/01 11:04:12 PM]

Running Gear - Heavy-Duty

TRAILER TYPE D Capacities to 18,000 lbs. per axle, front mounted tie-rods.

SOME SAMPLE RUNNING GEAR COMBINATIONS

CONFIGURATION Singles-Front/Rear Singles-Front Duals-Rear Singles-Front/Rear Singles-Front/Rear Singles-Front/Rear 7.50X15 7.50X15 9.00x16 9.00x16 540300 540291 540216 540309 TIRE 7.50X15 WHEEL 540291 HUB 522880-1 522882-3 522845-6 525410-1 522410-1 525422-3 NONE 519830-1 519830-1 519830-1 T-15-1/4 T-27 T-27 T-27 T-33 T-35 T-37 T-38 T+18-5/8 T+8-1/2 T+9-7/8 T+10-3/8 T-24 T-24 T-24 T-24 * HUB& DRUM FRNT&RR BRAKE NONE K T-14 S T-32 W T+8-1/2 R T-12-1/2

SELECTION PROCEDURE
1. Check quotation specification drawings 2. Tire size 3. Axle size and spindles 4. Springs and fittings 5. Wheels 6. Parking brakes 7. Service brakes 8. Brake drums 9. Hubs 10. Parking Brake Linkages 11. Service brake actuating systems 12. Drawbars 13. Chassis accessories such as: tie-downs, reflectors, lunnette eyes, pintle hooks, etc.

DESIGN NOTES
When a drawbar latch is required the tongue length must be sufficient so that the drawbar is attached in front of the frame. MIL-M-8090 requires the drawbar to be raised at any possible cramping or turning angle of the tongue.

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Heavy_Duty2.htm [7/30/01 11:04:14 PM]

Running Gear - Self-Propelled

SELF-PROPELLED RUNNING GEAR

SELF-PROPELLED STEERING AXLE - LAYOUT SPEEDS NOT TO EXCEED 20 M.P.H.

TYPICAL LAYOUT FOR TYPE "M"

Capacities from 500 to 7,000 lbs per axle, rear mounted tie rods. Consult trailer running gear section for dimensions.

TYPICAL LAYOUT FOR TYPE "H"

Capacities from 3,000 to 12,000 lbs per axle, front mounted tie rods. Consult trailer running gear section for dimensions.

TYPICAL LAYOUT FOR TYPE "D"

Capacities to 18,000 lbs per axle, front mounted tie rods. Consult trailer running gear section for dimensions.

file:///D|/My%20Documents/My%20Webs2/Hadco/Running%20Gear%20-%20Self-Propelled.htm [7/30/01 11:04:16 PM]

Tie Down Rings

TIE DOWN RINGS

Hadco offers a complete line of chassis accessories, such as tie down rings, tie down ring mounting blocks, pintle hooks and lunette eyes.

528010
q q

5,000 lbs. capacity Conforms to Air Force drawing #48B7385 Weight - .90 lbs

528012
q q

10,000 lbs. capacity Conforms to Air Force drawing #48B7796 Weight - .81 lbs.

528014
q q

25,000 lbs. capacity Conforms to Air Force drawing #49B6564 Weight - 2.5 lbs.

How To Order 1.Select accessory required. 2.Order by using specified code number.

file:///D|/My%20Documents/My%20Webs2/Hadco/Tie_Down_Rings.htm [7/30/01 11:04:17 PM]

Tires & Wheels

TIRES &WHEELS
SELECTION PROCEDURE 1.To meet the requirements of MIL-M-8090C, wheels and hubs should be selected in accord with the appropriate Industrial Wheel Chart, Transport Single Wheel Chart, or Transport Dual Wheel Chart. 2. For commercial standards Hadco can supply wheels for all tire sizes shown in this catalog. INDUSTRIAL WHEEL CHART Wheels for Industrial Tires
Wheel Size Tire Size (Ply) Wheel Specification P/N Weight Hadco Hub Series Infl.

Capacity
10 MPH Infl. 60 MPH

580 6X31/4 8X33/4 8X41/4 9X4 9X4 10X51/2 10X51/2 10X51/2 4.10/3.50-6(4) 4.80/4.00-8(6) 5.00X8(Solid) 6.90/6.00-9(10) 6.00x9(Solid) 7.50/10(10) 9.00/10(10) 24-7.7(14) 540400 540403 540402 540406 540000 540409 540409 540418 MS24323-1 MS24324-1 Commercial MS24325-1/ Commercial MS24326-1 MS24326-1 Special 4 8 9.1 11 11 19.2 19.2 29.4 390 390 3140 385 2R 385 385 3047 85 psi 100 psi Solid 100 psi Solid 100 psi 75 psi 135 psi 1030 1675 1995 2080 2965 3580 90 psi 1975 100 psi 1510 90 psi 745

Option: 40958 Wheel with 21/32" Bolt Holes for 5/8 Studs on 3047 Hub Series 540400 WHEEL 5 ON 4 1/2 B.C.

file:///D|/My%20Documents/My%20Webs2/Hadco/Tires%20&%20Wheels.htm [7/30/01 11:04:20 PM]

Tires & Wheels part-2

TIRES &WHEELS Part-2

540403 WHEEL 5 ON 4 1/2 B.C.

540406 WHEEL 5 ON 5 1/2 B.C.

540402 WHEEL EMBOSSED FOR CONE NUTS 5 ON 4 1/2 B.C.

file:///D|/My%20Documents/My%20Webs2/Hadco/Tires&Wheels2.htm [7/30/01 11:04:22 PM]

Tires & Wheels part-3

TIRES &WHEELS Part-3

540000 WHEEL EMBOSSED FOR CONE NUTS 5 ON 4 1/2 B.C.

540409 WHEEL 5 ON 5 1/2 B.C.

*40958 Wheel - Same as 40409 with 21/32 diameter bolt holes, C sunk 90 degrees. *40418 Wheel - Made from 40958 reinforcing rings added.

file:///D|/My%20Documents/My%20Webs2/Hadco/Tires&Wheels3.htm [7/30/01 11:04:23 PM]

Order Form part-1

ORDER / QUOTE FORM

file:///D|/My%20Documents/My%20Webs2/Hadco/Order%20Form.htm [7/30/01 11:04:25 PM]

Order Form part-2

ORDER / QUOTE FORM

MIL. SPECS: 1. APPLICABLE 2. ROAD SURFACE: 3. TOWING SPEED: 4. WHEEL BASE: TURNING CRAMPING ANGLE: 5. 40 DEGREES 6. SPECIAL: 20. WHEELS: INCHES PARKING BRAKES: 21. DISTANCE FROM FRONT AXLE TO FRONT OF FRAME FRAME: 7. OVER TIRES 8. DRAWBAR LATCH: STEERING AXLE 9. CAPACITY: 10. REAR AXLE CAPACITY: TIRE SIZE: 11. PLY 12. TRACK: BETWEEN TIRES YES LBS 23. LBS HUBS: 24. NO 22. SERVICE BRAKES: 19. NONE M.P.H. MAX. COMMERCIAL 18. MOUNTING: NONE SPRING FITTINGS: SPRING:

Part-2

N/A OR CHECK "NONE" FOR ITEMS NOT WANTED

FRONT: REAR: OVER AXLE UNDER AXLE FRONT: REAR: NONE FRONT: REAR: FRONT: REAR: BRAKE DRUMS: FRONT: REAR: FRONT: REAR: PARKING BRAKE LINKAGE: INCHES 25. 13. FRAME WIDTH: OUTSIDE DIM. A DIM: D DIM: B DIM: E DIM: ( See Catalog Brake Linkage Section ) OUTSIDE TIRES 26. SERVICE BRAKE ACTUATING KIT: 15. TONGUE LENGTH: 27. HYDRAULIC LINE & FITTING KIT: SPRING CENTERS: 16. REAR: AXLE SIZE TYPE: 17. FRONT: 29. REAR: COMMERCIAL PRIME ONLY FRONT: 28. LENGTH: PAINT: PRIME PER MIL-P-8585 A ONLY DRAWBAR STANDARD 48" SPECIAL: C DIM: NONE

14. OVERALL WIDTH:

file:///D|/My%20Documents/My%20Webs2/Hadco/Order_Form2.htm [7/30/01 11:04:27 PM]

Order Form part-3

ORDER / QUOTE FORM Part-3

SPECIAL FEATURES & ACCESSORIES:

RUNNING GEAR WILL BE USED ON:

(SPECIFY TYPE OF EQUIPMENT)

WE EXPECT TO USE

QUANTITIES OF THESE UNITS:

DELIVERIES AS FOLLOWS:

COMPANY: NAME: ADDRESS: CITY: STATE:

SUBMIT

COUNTRY: ZIP: PHONE: FAX: EMAIL:

Reset

file:///D|/My%20Documents/My%20Webs2/Hadco/Order_Form3.htm [7/30/01 11:04:28 PM]