Scribd
Upload
500 views22 pages

Oss Manual

The document provides instructions for remotely accessing a mobile network site to validate interface delay budget (IDB) values: 1. Select a site from the site list and access it remotely using a VPN. 2. Use the OSS and network element commands to view the site's IP address and trunking group (TG) number. 3. Connect to the site using the OMT application via the IP and TG and read the current IDB values. 4. Disconnect from the site after validating the IDB values and updating the tracking spreadsheet.

Uploaded by

Luciano Giorcelli
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
500 views22 pages

Oss Manual

The document provides instructions for remotely accessing a mobile network site to validate interface delay budget (IDB) values: 1. Select a site from the site list and access it remotely using a VPN. 2. Use the OSS and network element commands to view the site's IP address and trunking group (TG) number. 3. Connect to the site using the OMT application via the IP and TG and read the current IDB values. 4. Disconnect from the site after validating the IDB values and updating the tracking spreadsheet.

Uploaded by

Luciano Giorcelli
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 22

STEP 1: SEE THE SITE LIST AND CHOICE THE SITE TO WORK

Complete the GSM IDB Validation file

The FEED_TXA_RXA_LOSS final is the sam for FEED_RXR_Loss final and the same procedure for FEED_TXA_RXA_delay you can looking this value in IDB_VALUES excel file

CONNECT BY VPN TO T-MOBILE ATLANTA INTERNET FACING

PUT YOUR USERNAME AND PASSWORD FOR START THE CONNECTION

OPEN THE OSS wayossb

Wait for connection

Select command handling

Connect in the network element with the BSC in this case :DCBSC67

Write the command for know the IP

Copy the IP to your site list

The name of site ID is the same for take the TG but you have to delete the first character and change the last character for A in the case, is another letter Site id: 7WAS143A Change for take the TG for WAS143A in this case the last latter is A you dont need to make any change, by the way, if the last letter not is a A you need to change for A

Put the command to know the TG

Now write the TG number in your site list

Now open the OMT application

Select -Connect

Write the same IP ADDRESS and put the TG number in MO index, leave the port in 12000 if not work, you can change for 12001,12002 or 12003, the password is: ericsson

Read IDB

Disconnect

Start to see the Loss value, copy this value to the GSM IDB excel file and change for the new value

Complete all the values and now for the feeder delay

Connect

Put the site in FULL MAINTENANCE

INSTALL IDB

Change MAINTENANCE MODE

Click OK Create a log file

Save the log file with the ID site name

Disconnect

Check if the site have traffic

Put the status OK in the site list

Done, enjoy!

You might also like