Scribd Logo
Upload

Welcome to Scribd!

  • 112 views

    ATLAN 24 Thiet Bi Chong Set LAN Data 24 Port

    Uploaded by

    Kenh Nhat Dat
    The document describes the ATLAN 24/16/8 series surge protectors for computer network racks. It can protect 8, 16, or 24 network lines with RJ45 connectors. Protection should be installed as close to equipment as possible, such as in switches and hubs. The protectors screw into a rack-mounted box and connect network lines to protect inputs from transient overvoltages that could harm electronic circuits. They have a maximum speed of 1000Mbps and can withstand currents up to 2kA to protect networks transferring large amounts of data. Proper grounding is required for effective protection.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    ATLAN 24 Thiet Bi Chong Set LAN Data 24 Port

    Uploaded by

    Kenh Nhat Dat
    112 views2 pages
    The document describes the ATLAN 24/16/8 series surge protectors for computer network racks. It can protect 8, 16, or 24 network lines with RJ45 connectors. Protection should be installed as close to equipment as possible, such as in switches and hubs. The protectors screw into a rack-mounted box and connect network lines to protect inputs from transient overvoltages that could harm electronic circuits. They have a maximum speed of 1000Mbps and can withstand currents up to 2kA to protect networks transferring large amounts of data. Proper grounding is required for effective protection.

    Original Description:

    d

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the ATLAN 24/16/8 series surge protectors for computer network racks. It can protect 8, 16, or 24 network lines with RJ45 connectors. Protection should be installed as close to equipment as possible, such as in switches and hubs. The protectors screw into a rack-mounted box and connect network lines to protect inputs from transient overvoltages that could harm electronic circuits. They have a maximum speed of 1000Mbps and can withstand currents up to 2kA to protect networks transferring large amounts of data. Proper grounding is required for effective protection.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    112 views2 pages

    ATLAN 24 Thiet Bi Chong Set LAN Data 24 Port

    Uploaded by

    Kenh Nhat Dat
    The document describes the ATLAN 24/16/8 series surge protectors for computer network racks. It can protect 8, 16, or 24 network lines with RJ45 connectors. Protection should be installed as close to equipment as possible, such as in switches and hubs. The protectors screw into a rack-mounted box and connect network lines to protect inputs from transient overvoltages that could harm electronic circuits. They have a maximum speed of 1000Mbps and can withstand currents up to 2kA to protect networks transferring large amounts of data. Proper grounding is required for effective protection.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    ATLAN 24/16/8 Series

    PROTECTOR FOR COMPUTER NETWORK RACK

    ATLAN 24/16/8
    AT-2206 ATLAN 8: protector in rack ready for 8 network lines. AT-2209 ATLAN 16: protector in rack ready for 16 network lines. AT-2208 ATLAN 24: protector in rack ready for 24 network lines.

    Installation
    Protection should be done as close as possible to the equipment. In this particular case, were talking about switches and hubs. In case where two equipments located in separated buildings but linked together are to be protected, protection must be installed in both sides of the line. The recommended installation procedure is as it follows: 1. Screw down protectors in the box prepared for mounting in the 19 rack. 2. Insert the network distribution lines that come off the hub or switch to the protector. 3. Bond the cabinet ground to the ground marked in the box chassis.

    ATLAN SPDs are specially designed to avoid failures in data transfer between equipments inside the same network. They protect the input of the electronic circuits of the network cards against harms due to transient currents.

    ATLAN 24/16/8 is an SPD prepared for 24, 16 and 8 lines of protection with four pairs protected per line. This is done with a Printed Circuit Board with RJ45 input/output connectors. With a withstanding current up to 2kA for each line and a transfer speed of Gbits/s. Its aimed to be inserted into a rack and protect distribution computer network cabinets. Because of its high transfer speed, its suitable for networks transferring a big amount of data (servers, workstations, graphic stations, etc). Includes output cable with connector RJ45 of 50 cm. ATLAN 24/16/8 have been tested in official, independent laboratories, obtaining their characteristics according to relevant standards (related in the table).

    Earth connection is a must. Earthing in all the installation must be bonded either directly or by a spark gap and resistance should be lower than 10. If the indications of this datasheet are not fulfilled during the use or installation of the SPDs, the protection assured by this device could be endangered.

    RJ45 Cable from network

    RJ45 Cable to PCs

    INTERNAL PROTECTION

    231

    Serie ATLAN 24/16/8


    Technical Datasheet
    ATLAN 8 Reference Maximum speed transfer: Nominal voltage: Maximum continuous operating voltage: Nominal discharge current for line C2 4kV(1,2/50s) / 2kA(8/20s): Protection level: Maximum working current: Series resistance: Response time: Working temperature: SPD location: Type of connection: Number of pairs protected: Dimensions: Enclosure material: Enclosure protection: Input / Output connector: Earthing: Certificated tests according to: IEC 61643-21, EN 61643-21 Complies with requirements of: UL 1449 Relevant standards: UNE 21186, NFC 17102, IEC 62305 8 x 4 pairs Un Uc In(C2) Up IL Rs tr AT-2206 ATLAN 16 AT-2209 1000Mbit/s 5VDC 6VDC 2kA 50V 300mA 15 < 10ns -40C to +70C Indoor Series (two ports) 16 x 4 pairs 483 x 130 x 46mm Steel IP20 RJ45 / RJ45 shielded M5 screw 24 x 4 pairs ATLAN 24 AT-2208

    Accessories

    ATLAN 8 PCB AT-2215 Printed Circuit Board for ATLAN 8/16/24. It is prepared for 8 lines. ATLAN 8/24 AT-2201 Metallic panel where ATLAN 8 PCB modules can be fitted in up to a number of 3, to be monted in 19 racks.

    Dimensions

    232

    INTERNAL PROTECTION

    You might also like