Scribd
Upload
257 views2 pages

Reducer SB 169

The document provides dimensions for reducers that comply with ASME B16.9 standards. It lists nominal pipe sizes (NPS) from 3/4 to 48 inches along with the outer diameters of the large and small ends and the height (H) dimension. While bell-shaped reducers are illustrated, conical reducers are also allowed. All dimensions are provided in inches.

Uploaded by

jontylee87
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
257 views2 pages

Reducer SB 169

The document provides dimensions for reducers that comply with ASME B16.9 standards. It lists nominal pipe sizes (NPS) from 3/4 to 48 inches along with the outer diameters of the large and small ends and the height (H) dimension. While bell-shaped reducers are illustrated, conical reducers are also allowed. All dimensions are provided in inches.

Uploaded by

jontylee87
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Dimensions of Reducers to ASME B16.

Nominal

O.D. at Bevel

Pipe
Size

Large

Small

End

Nominal

to

Pipe

End

Size

NPS

End

End

3/4 x 1/2
3/4 x 3/8
1 x 3/4
1 x 1/2
11/4 x 1
11/4 x 3/4
11/4 x 1/2
11/2 x 11/ 4
11/2 x 1
11/2 x 3/4
11/2 x 1/2
2 x 11/2
2 x 11/4
2x1
2 x 3/4
21/2 x 2
21/2 x 11/2
21/2 x 11/4
21/2 x 1
3 x 21/2
3x2
3 x 11/2
3 x 11/4
31/2 x 3
31/2 x 21/2
31/2 x 2
31/2 x 11/2
31/2 x 11/4
4 x 31/2
4x3
4 x 21/2
4x2
4 x 11/2

1.05
1.05
1.32
1.32
1.66
1.66
1.66
1.90
1.90
1.90
1.90
2.38
2.38
2.38
2.38
2.88
2.88
2.88
2.88
3.50
3.50
3.50
3.50
4.00
4.00
4.00
4.00
4.00
4.50
4.50
4.50
4.50
4.50

0.84
0.68
1.05
0.84
1.32
1.05
0.84
1.66
1.32
1.05
0.84
1.90
1.66
1.32
1.05
2.38
1.90
1.66
1.32
2.88
2.38
1.90
1.66
3.50
2.88
2.38
1.90
1.66
4.00
3.50
2.88
2.38
1.90

1.50
1.50
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
3.50
3.50
3.50
3.50
3.50
3.50
3.50
3.50
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00

All dimensions are given in inches.

NPS

5x4
5 x 31/2
5x3
5 x 21/2
5x2
6x5
6x4
6 x 31/2
6x3
6 x 21/2
8x6
8x5
8x4
8 x 31/2
10 x 8
10 x 6
10 x 5
10 x 4
12 x 10
12 x 8
12 x 6
12 x 5
14 x 12
14 x 10
14 x 8
14 x 6
16 x 14
16 x 12
16 x 10
16 x 8
18 x 16
18 x 14
18 x 12
18 x 10

O.D. at Bevel

End
to

Large

Small

End

End

End

5.56
5.56
5.56
5.56
5.56
6.62
6.62
6.62
6.62
6.62
8.62
8.62
8.62
8.62
10.75
10.75
10.75
10.75
12.75
12.75
12.75
12.75
14.00
14.00
14.00
14.00
16.00
16.00
16.00
16.00
18.00
18.00
18.00
18.00

4.50
4.00
3.50
2.88
2.38
5.56
4.50
4.00
3.50
2.88
6.62
5.56
4.50
4.00
8.62
6.62
5.56
4.50
10.75
8.62
6.62
5.56
12.75
10.75
8.62
6.62
14.00
12.75
10.75
8.62
16.00
14.00
12.75
10.75

5.00
5.00
5.00
5.00
5.00
5.50
5.50
5.50
5.50
5.50
6.00
6.00
6.00
6.00
7.00
7.00
7.00
7.00
8.00
8.00
8.00
8.00
13.00
13.00
13.00
13.00
14.00
14.00
14.00
14.00
15.00
15.00
15.00
15.00

While the illustration shows "bell shaped" reducers,


the use of conical reducers is not prohibited.

Dimensions of Reducers to ASME B16.9

Nominal

O.D. at Bevel

End

Nominal

O.D. at Bevel

End

Pipe

Large

Small

to

Pipe

Large

Small

to

Size

End

End

End

Size

End

End

End

20.00
20.00
20.00
20.00
22.00
22.00
22.00
22.00
24.00
24.00
24.00
24.00
26.00
26.00
26.00
26.00
28.00
28.00
28.00
28.00
30.00
30.00
30.00
30.00
32.00
32.00
32.00
32.00
34.00
34.00
34.00
34.00

18.00
16.00
14.00
12.75
20.00
18.00
16.00
14.00
22.00
20.00
18.00
16.00
24.00
22.00
20.00
18.00
26.00
24.00
20.00
18.00
28.00
26.00
24.00
20.00
30.00
28.00
26.00
24.00
32.00
30.00
26.00
24.00

20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00

36.00
36.00
36.00
36.00
36.00
38.00
38.00
38.00
38.00
38.00
38.00
40.00
40.00
40.00
40.00
40.00
42.00
42.00
42.00
42.00
42.00
42.00
44.00
44.00
44.00
44.00
46.00
46.00
46.00
46.00
48.00
48.00
48.00
48.00

34.00
32.00
30.00
26.00
24.00
36.00
34.00
32.00
30.00
28.00
26.00
38.00
36.00
34.00
32.00
30.00
40.00
38.00
36.00
34.00
32.00
30.00
42.00
40.00
38.00
36.00
44.00
42.00
40.00
38.00
46.00
44.00
42.00
40.00

24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
28.00
28.00
28.00
28.00
28.00
28.00
28.00
28.00

NPS

20 x 18
20 x 16
20 x 14
20 x 12
22 x 20
22 x 18
22 x 16
22 x 14
24 x 22
24 x 20
24 x 18
24 x 16
26 x 24
26 x 22
26 x 20
26 x 18
28 x 26
28 x 24
28 x 20
28 x 18
30 x 28
30 x 26
30 x 24
30 x 20
32 x 30
32 x 28
32 x 26
32 x 24
34 x 32
34 x 30
34 x 26
34 x 24

NPS

While the illustration shows "bell shaped" reducers,

36 x 34
36 x 32
36 x 30
36 x 26
36 x 24
38 x 36
38 x 34
38 x 32
38 x 30
38 x 28
38 x 26
40 x 38
40 x 36
40 x 34
40 x 32
40 x 30
42 x 40
42 x 38
42 x 36
42 x 34
42 x 32
42 x 30
44 x 42
44 x 40
44 x 38
44 x 36
46 x 44
46 x 42
46 x 40
46 x 38
48 x 46
48 x 44
48 x 42
48 x 40

the use of conical reducers is not prohibited.

All dimensions are given in inches.

You might also like