MERIDIAN NORSTAR COMPACT & MODULAR SYSTEMS

Feature FEATURE * 0 FEATURE * 1

Function Key Inquiry

Explanation Show what is programmed to a key [button]

Programme outside speed Programme an outside number to a key: dial to a key FEATURE * 1 press required key then dial outside number Programme internal extension number to a key Programme an extension number to a key: FEATURE * 2 press required key then dial extension number

FEATURE * 2

FEATURE * 3

Programme a function to Programme feature to a key: a key FEATURE * 3 Press required key then dial feature code [e.g. last number re-dial FEATURE 5 ] Programme a personal speed dial Press FEATURE * 4 Press a two digit code 71 - 94 dial telephone number required. Insert 9 / line access code at the front of number if required Press HOLD when finished Programme ring type & volume: press FEATURE * 6 press 1 2 3 4 to choose ring type, use the volume bar to set ring volume Press FEATURE * 7 and 1 - 9 or UP / DOWN Press FEATURE * 8 0 phone starts ringing use the volume bar to set ring volume press Rls 1. Press FEATURE * 8 1. 2. Press the line key you want to move. 3. Press the line key you want to assign.

FEATURE * 4

FEATURE * 6

Set Ring Type

FEATURE * 7 FEATURE * 8 0

Adjust LCD contrast Set Ring Volume

FEATURE * 8 1

Move Line Keys

4. Press Rls. The functions of the keys are now exchanged. Line keys cannot be exchanged with intercom or handsfree/mute keys. FEATURE * 82 Set dialling mode There are three settings: 1. Automatic dial - this is the normal setting - hot dial pad: dial a number without picking up handset or pressing a line key. 2. Standard dial - press a line key, then dial the number. 3. Pre - dial - dial a number, then press a line key to start the call dialling. When used at the end of a speed dial digit string this feature acts as the Rls key Refer to system manager

FEATURE * 8 9

Programmed Release

FEATURE * 9 FEATURE 0 [ 71 - 94 ]

Run / Stop

Use a personal speed dial To dial: press FEATURE 0 and a two digit code 71 - 94 These speed dials are available at your phone only and you programme them with FEATURE * 4 Use a central speed dial To dial: press FEATURE 0 and a two digit code 01 - 70 These speed dials are available at all phones (subject to call barring) and are programmed by the system manager Send a message to an extension that they are to call you: 1. Press FEATURE 6 5 or MSG to view messages. 2. Press * / # or next to view message list. 3. Press 0 or call to call the person who left a message. 4. Press hold or erase (whilst viewing a message) to erase a message. Cancel a message When an extension is busy or not answered you can tell the system to call again when the party is available you can use this feature to 'book' a free line

FEATURE 0 [ 01 - 70 ]

FEATURE 1

Send Message

FEATURE # 1 FEATURE 2

Cancel a Message Ring Again

FEATURE 3

Conference

1. Make or take a call. 2. Put the first call on hold. 3. Make or take a second call. 4. Press FEATURE 3 or conf/trans. 5. Press the line key of the first held call. 6. To end the conference press Rls Send your calls to another extension

FEATURE 4 FEATURE # 4 FEATURE 5 FEATURE 6 0

Call Forward to another extn Cancel Call Forward to another extn Last Number Redial Page General

Redial of the last external number dialled Page general: Press FEATURE 6 0 Press code: 1 = Extensions 2 = External PA speakers 3 = Both Press zone 2 or 3 (0 = all zones) Page internal - to all extensions: Press FEATURE 6 1 Press zone 2 or 3 (0 = all zones) Page external to external pa speakers: Press FEATURE 6 2 Press zone 2 or 3 (0 = all zones) Page external to external pa speakers & internal to extensions: Press FEATURE 6 3 Press zone 2 or 3 (0 = all zones) To use a line pool: Press FEATURE 6 4 or INTERCOM then dial line pool code [eg 9]. To programme a line pool key: FEATURE *3 then KEY then FEATURE 6 4 [code e.g. 9] Line pools are normally accessed by dialling 9 or 8 or have a key assigned to them See Message

FEATURE 6 1

Page to internal zone

FEATURE 6 2

Page external

FEATURE 6 3

Page to internal zone & external

FEATURE 6 4

Line Pool Access

FEATURE 6 5 FEATURE 6 6

Reply to a message

Voice Call to an extension Speak direct to an extension without ringing:

Press FEATURE 6 6 Dial extension number then start speaking FEATURE 6 7 Saved Number Redial You have dialled an external number and are connected: Press FEATURE 6 7 - the number is now stored. You can dial this saved number by pressing FEATURE 6 7 Bypass call restrictions applied to your telephone: FEATURE 6 8 password Interrupt a person on a call or using do not disturb Transfer a call to another extension: 1. You are on a call. 2. Press TRANSFER or FEATURE 7 0 3. Dial extension number. 4. Extension answers, announce call. 5. Press or Rls to OK connect call. If the extension does not want call or does not answer press CANCEL Generate a flash / recall signal to your host PBX Puts a call on hold (terminal shows a retrieval code of 101 or 102) and is available for retrieval from any extension dialling the retrieval code Collect a parked call Answer a call ringing at another extension (extension must be in your pickup group, the call that has been awaiting answer the longest is answered first). Shows duration of current / last call DTMF: inserts a 3.5 second delay in digit string Temporarily suspend a call - only your telephone can retrieve it to retrieve: press Hold or line key

FEATURE 6 8

Restriction passwords / bypass call restrictions Priority Call Transfer

FEATURE 6 9
FEATURE

70

FEATURE 7 1 72 Feature 7 4

Flash / Recall Timed Release Call Park

Intercom 101 or Intercom 102 FEATURE 7 5

Call Park Retrieval Pickup

FEATURE 7 7 FEATURE 7 8 FEATURE 7 9

OR FEATURE

Call Timer Pause Exclusive Hold

HOLD

FEATURE 8 3

Privacy ON

Allow a telephone that shares your line to join your call (auto switch off on end of call) Calls on one or more exchange lines are sent elsewhere (outside of the system).

FEATURE # 8 3 FEATURE 8 4 FEATURE # 8 4 FEATURE 8 5 FEATURE # 8 5 FEATURE 8 6 FEATURE # 8 6 FEATURE 8 7 FEATURE 8 8 FEATURE # 8 8 FEATURE 8 0 0 FEATURE 8 0 2

Privacy OFF Exchange Line redirect ON Exchange Line redirect OFF Do Not Disturb On Do Not Disturb Off Background Music On Background Music Off Service Modes Voice Call Deny On Voice Call Deny Off Trunk Answer Group Listen ON Pick up a ringing external call that is ringing in a service mode Use the speaker and the handset at the same time for others to hear the call. * Not available for headset users. * May cause feedback To see the time whilst on a call: Press FEATURE 8 0 3 Makes tones on key pad last as long as the key is held Temporarily place a call on hold: To retrieve: press HOLD or LINE KEY e.g. Night Service prevent your extension from receiving voice calls If music is available on your system Prevents any calls ringing at your extension

FEATURE # 8 0 2 FEATURE 8 0 3 FEATURE 8 0 8 HOLD

Group Listen OFF Time Long Tones Hold a Call

TRANSFER

Transfer

Transfer a call to another extension: 1. You are on a call. 2. Press TRANSFER or FEATURE 7 0 3. Dial extension number. 4. Extension answers, announce call. 5. Press Rls or OK to connect call. If the extension does not want the call or does not answer press CANCEL

Changing the System Time

To change the system time on the Norstar Meridian: 1. Place the programming overlay on any M7208, M7310 or M7324 2. Press FEATURE * * A D M I N (2 3 6 4 6), the display reads Password: 3. Enter the Admin password, the default is A D M I N (2 3 6 4 6), the display reads 1. Sys speed dial 4. Press NEXT until the display reads 3. Time and date 5. Press SHOW, the display reads Time 6. Press CHANGE, the display reads Hour: 7. Press CHANGE 8. Enter the hour in two-digit format for the 12 or 24 hour clocks 9. Press NEXT the display reads Minutes 10. Press CHANGE 11. Enter the minutes 12. Press NEXT 13. If you have entered an hour less than 12, the display reads AM or PM. If not, skip to step 15. 14. Press CHANGE to toggle between AM and PM 15. Press RLS to exit

System Programming for Meridian Compact

To go into the System Programming on the Norstar Meridian: 1. 2. 3. 4. 5. Place the programming overlay on any M7208, M7310 or M7324 Press FEATURE * * C O N F I G (2 6 6 3 4 4), the display reads Password: Enter the System password, the default is C O N F I G (2 6 6 3 4 4), Use the navigation keys to change the settings, as required. See System Programming sheet for configuration details: Word Document Adobe PDF 6. Press RLS to exit