Tta 7

Seamless carbon,
alloy and stainless steel

Butt welding fittings
The Company
Tubacex Taylor Accesorios, is an independent

private company which was founded in 1972 as
a Joint Venture between Taylor Forge and the
Tubacex Group. This relation finished in 1977 and,
since then, T.T.A is fully integrated in the Tubacex
Group. T.T.A.s manufacturing capabilities in
addition to the range of pipe of the Group enables
our customers to achieve higher efficiency in their
purchasing decisions.
Located 30 Km from the seaport of Bilbao, in the
north of Spain, we provide our fittings to almost
all markets around the world.
These Companies, among others, have already

relied on our products and expertise: Foster
Wheeler, Repsol, Total, Tcnicas Reunidas, Fluor,
ABB Lummus, Petrochem Development Co., KTI
Corporation, BP Oil, ExxonMobil, Stone & Webster,
Heurtey Petrochem, Boustead International
Heaters, HCI, IKT Brazil, Linde Impianti, Kirchner
Italia, Selas Linde, Technip, Shell, Tioga Pipe
Supply Co., Suncor, Schmidt & Clemens, Conoco
Phillips and Toyo Engineering. Through them, we
have taken part in many of the most important
projects for new refineries or revamps in the
Petrochemical sector (our major market).
Gijn
Santander
Bilbao
The Product
Butt Welding Fittings made of Carbon Steel, Alloy Steel, Stainless Steel (austenitic,
austenoferritic and martensitic) and Nickel-based Alloys.
Tube Bends: SR, LR and Special Radius.
Concentric and Eccentric Reducers in various sizes (from 2 X 1 up to 12 X 10).
Fittings with Special Sizes.
Applications
Furnaces and Reactors for Oil and Petrochemical Ind.
Chemical Ind.; Oil & Gas Refineries.
Generation: Boilers (Industrial and Generation types).
Manufacturing Equipment.
Heat Exchangers.
AUSTENITICFERRITIC
NICKEL ALLOYS
SEAMLESS STAINLESS STEEL
AUSTENITICS
DIN / EN
ASTM
STEEL GRADE
UNS
NORM
CODE
STEEL GRADE
STANDARD
1.4301
X5 CrNi 18 10
DIN 17458
EN 10253-4
S 30400
...
...
...
1.4306
X2CrNi 19 11
DIN 17458
EN 10253-4
1.4828
X15CrNiSi 20 12
SEW 470
1.4541
X6CrNiTi 18 10
1,4878
STANDARD
%Ni
%Cr
%Mo
WP 304
ASTM A 403
8-11
18-20
S 30409
WP 304 H
ASTM A 403
8-11
18-20
S 30403
WP 304 L
ASTM A 403
8-13
18-20
DIN 17458
EN 10253-4
S 32100
WP 321
ASTM A 403
9-13
17-20
X12CrNiTi 18 9
SEW 470
S 32109
WP 321 H
ASTM A 403
1.4550
X6CrNiNb 18 10
DIN 17458
EN 10253-4
S 34700
WP 347
ASTM A 403
S 34709
WP 347 H
ASTM A 403
9-13
17-20
1.4401
X5 CrNiMo 17 12 2
S 31600
WP 316
ASTM A 403
10-14
1.4404
X2CrNiMo 17 13 2
1.4435
X2CrNiMo 18 14 3
S 31603
WP 316 L
ASTM A 403
11-16
1.4571
X6CrNiMoTi 17 12 2
S 31635
WP316Ti
ASTM A 213
10-14
1,4941
X6CrNiTiB1810
1,4910
X3CrNiMoNB17-13-3
1,4580
X6CrNiMoNb 17 12 2
1.4833
X7CrNi2314
1.4845
X15 CrNiSi 25 20
DIN 17458
EN 10253-4
DIN 17458
EN 10253-4
DIN 17459
EN 10216-5
EN 10216-5
DIN 17458
SEW 470
16-18 (16,5-18,5) 2,0-3,0 (2,0-2,5)

16-18 ( 16,5-18,5) 2,0-3,0 (2,0-2,5)
16-18 (17-18,5) 2,0-3,0 (2,5-3,0)
16-18
2,0-2,5
WP316Ti
S 31609
WP 316 H
ASTM A 403
WP 316H Nb ASTM A 213

S 30940
WP 309
S 31008
WP 310
S 31703
WP 317 L
S 31700
WP 317
ASTM A 403
10-14
16-18
2,0-3,0
10,5-13,5
16,5-18,5
2,0-2,5
12-15
22,24
19-22
24-26
11,0-14,0
18-20
3,0-4,0
17,5-18,5
19,5-20,5
6,0-6,5
24-26
19-21
4,0-5,0
1.4438
X2CrNiMo 18 15 4
EN 10253-4
1,4547
X1CrNiMoCuN20-18-7
EN 10253-4
S31254
1.4539
X1NiCrMoCuN 25 20 5
SEW 400
Vd TV 421
EN 10253-4
N 08904
WP 904 L
N 08800
WPNIC
30-35
19-23
N 08810
WPNIC 10
30-35 (30-34)
19-23
1,4876
X10NiCrAlTi 32 20
SEW 470
Vd TV 412
6Mo SUPER
ASTM A403
AUSTENITIC
ASTM B 366
ASTM B 366
1.4876H
X10NiCrAlTi 32 20 H
2.4660
NiCr20CuMo
2.4858
NiCr 22Mo 9Nb
1,4410
1.4501
1.4462
X2CrNiMoN 22 5 3
Vd TV 434
N 08811
WPNIC 11
30-35 (30-34)
19-23
N 08020
WP20CB
Alloy 20
32-38
19-21
2,0-3,0
Vd TV 432/2
N 08825
WPNICMC
38-46
19,5-23,5
2,5-3,5
X2CrNiMoN25-7-4
EN 10253-4
S 32750
Superduplex ASTM A 815
6-8
24-26
3-May
X1CrNiMoCuWN 25 7 4
EN 10253-4
S 32760
Duplex 25Cr ASTM A 815
6,0-8,0
24-26
3,0-4,0
SEW 400
EN 10253-4
Vd TV 418
S 31803
21-23
2,5-3,5
Duplex 22Cr ASTM A 815
4,5-6,5
22-23
3,0-3,5
S32205
CARBON STEEL
13 Cr Mo 4-4
ALLOY STEEL
APRO
DIN 17175
WPB
< 0,40
< 0,40
< 0,15
WP1
0,44-0,65
WP11
1,00-1,50
0,44-0,65
WP12
0,80-1,25
0,44-0,65
WP22
1,90-2,60
0,87-1,13
4,0-6,0
0,44-0,65
1.7335
13 Cr Mo 4-5
1.7380
10 Cr Mo 9 10
1.7362
X11CrMo5
Vd TV 007/3
E10253-2
WP5
1.7386
X11CrMo9,1
Vd TV 109
E10253-2
WP9
8,0-10,0
0,90-1,10
1.4903
X 10 Cr Mo VNb 9-1
Vd TV 511/2
E10253-2
WP91
< 0,40
8,0-9,5
0,85-1,05
1,515
16Mo3
E10253-2
< 0,30
0,25-0,35
E10253-2
ASTM A234
ROXIMATE CHEMICAL COMPOSITION RANGE

%C
%Mn
< 0,08
< 2,00
0,04-0,10
< 2,00
< 0,035
< 2,00
0,04-0,10
< 2,00
%Nb
%Fe
%Others
5(C + N) < Ti < 0,70

4 (C+N) < Ti
0,04-0,10
< 2,00
10C- 1,00
8C-1,00
< 2,00
< 0,030
< 2,00
5 (C+N)< Ti < 0,80
< 2,00
< 2,00
0,04-0,10
< 2,00
< 0,08
< 0,03
0,50 < Cu < 1,00
N: 0,04-0,15
Cu < 0,75
Al: 0,15-0,60 ( 0,15-0,45)
< 2,00
Cu < 0,75
(Al + Ti )< 0,7
Co< 1,00
< 1,50
Cu < 0,75
(Al + Ti) >0,85 (Al + Ti
< 0,7)
Co< 1,00
< 0,07
< 2,00
< 0,05
< 1,00
8C-1,00
>22
Co < 1,00
Cu < 0,50
Cu: 0,50 - 1,00
N: 0,08 - 0,20
N: 0,14 - 0,20
< 0,30
< 1,35
< 0,28
0,30-0,90
0,05-0,15
0,30-0,60
0,05-0,15
0,30-0,60
< 0,15
0,30-0,60
< 0,15
0,30-0,60
0,08-0,12
0,30-0,60
0,12-020
0,40-0,90
< 0,02
Cu < 0,40
0,06-0,10
Vn
Wall Thickness
(Short Radius and Long Radius)

N.D.
(inches)
O.D.
(mm)
Sch.10
1 1/2
48,30
2
2 1/2
Sch.20
Sch.30
STD
Sch.40
2,77
3,68
60,30
2,77
73,00
3,05
Sch.60
XS
Sch.80
3,68
5,08
3,91
3,91
5,16
5,16
Sch.100
Sch.120
Sch.140
Sch.160
Sch.XXS
5,08
7,14
10,15
5,54
5,54
8,71
11,07
7,01
7,01
9,53
14,02
11,13
15,24
88,90
3,05
5,49
5,49
7,62
7,62
3 1/2
101,60
3,05
5,74
5,74
8,08
8,08
114,30
3,05
6,02
6,02
8,56
8,56
11,13
13,49
17,12
141,30
3,40
6,55
6,55
9,53
9,53
12,70
15,88
19,05
168,30
3,40
7,11
7,11
10,97
10,97
18,24
21,95
219,10
3,76
6,35
7,04
8,18
8,18
10,31
12,70
12,70
15,06
18,24
20,62
23,01
22,23
10
273,00
4,19
6,35
7,80
9,27
9,27
12,70
12,70
15,09
18,24
21,41
25,40
28,58
25,40
12
323,90
4,57
6,35
8,38
9,53
10,31
14,27
12,70
17,48
21,44
25,40
28,58
33,32
25,40
16,15
14,27
NOTE: OUR RANGE IN SR STARTS FROM 2.
The Manufacturing Processes

Hot Drawing Hamburg Process: this
process is suitable for both bends, in short or
long radius (SR or LR as per ASME B16.9) or
even for pieces with not standarized bending
radius. The diameter of the starting pipe is
smaller than the one of the formed elbow and
the thickness quite thicker.
Bending Process: this is a valid method
when the thickness/diameter ratio is greater
than 10%. The starting tube for this process
has to be slightly bigger in diameter than the
formed elbow.
Cold Forming Process: we only produce
some sizes of Long Radius elbows in some
Stainless Steel (S/40 and S/80 from 1 up to
4) starting from pipe of same diameter.
Facilities for the Manufacturing

5 hydraulic draw presses. (From 30tn. to 200tn.)
9 vertical hydraulic presses. (From 200tn. to 600tn.)
3 heat treatment furnaces.
Sawing and bevelling machines.
2 Shot-blasting cabins.
Pickling and Passivation automatic installation
for Stainless Steel.
Automatic painting line for rust protection
coating for Carbon and Low Alloy Steel fittings.
Equipment for measurement, testing and PMI
(Positive Material Identification).
Low Stress stamping marking machines.
2 indeleble Ink stencilling marking machines.
Quality Assurance
T.T.A. takes special care of the quality of the processes, equipment and products. Our Quality
Management Manual, summarizes the general requirements of our Quality Management System, which
is based on the UNE-EN-ISO 9001, ed.2000 standards. This Manual ensures that the products full
comply with the specified requirements and its application is obligatory in all areas of the Company.
The yearly statement of Quality Goals and improvement proposals resulting from the Management
Review, create the basis for a continuous improvement.
Facilities for Inspection and Testing:
2 Krautkramer DM 43 Ultrasonic Thickness Gauges.
Roughness Meter (CV Instrumen).
4 Hardness Testers (Time and Centaur).
3 Optical Spectrographic PMI Machines (Spectro Hispania S.L.).
Ferrite Measurement Machine (Fischer).
2 Optical Pyrometers (Hartman & Braun and Keller Optix).
Destructive Tests: Integranular Corrosion Test, Resilience Test, Hot Yield Test,
NDE: Liquid Penetrant Test, Magnetic Particle Test, Ultrasonic Test,
Equipment for measurement, testing and PMI (Positive Material Identification).
Sale Offices around the World

HEAD OFFICE
TUBACEX TAYLOR
ACCESORIOS, S.A.
Barrio Arenaza, 10
01474 Artziniega - Alava
SPAIN
Tel: + 34 945 39 60 30
Fax: + 34 945 39 60 64
e-mail: [email protected]
http://www.tubacex.com
TUBACEX EUROPA
TUBACEX EUROPE, B.V.

Stationsplein 4,3331 LL
ZWIJNDRECHT
HOLANDA
Tel: + 31 78 620 53 33
Fax: + 31 78 620 53 30
TUBACEX ITALIA
TUBACEX ITALIA
Via Vitruvio43
20124 MILAN
ITALIA
Tel: + 39 02 6695505
Fax: + 39 02 67384592
TUBACEX FRANCIA
TUBACEX FRANCE
9 rue du 11 Novembre
93600 AULNAY SOUS BOIS
FRANCIA
Tel: + 33 1 48 79 30 50
Fax: + 33 1 48 79 18 06
TUBACEX AMERICA
5430 Brystone Drive,
HOUSTON, TEXAS
77041, USA
Tel: + 1713 85627 00
Fax: + 1713 8562799
TUBACEX CANADA
TUBACEX CANADA INC.

4610 Eastgate Parkway, Unit 3
MISSISSAUGA,
ONTARIO L4W 3W6
CANADA
Tel: + (905) 629 2011
Fax: + (905) 629 4468
TUBACEX ASIA
TUBACEX ASIA
China Merchants Plaza
Unit #1502 - East Building 333,
Chengdu Bei Road
SHANGHAI 200041
CHINA
Tel: + 86-21-5298-0242 (6 ext.)
+ 86-1331-1681-767
Fax: + 86-21-5298-0241
TUBACEX LATINOAMRICA
TUBACEX LATINOAMRICA
Rodovia Anhanguera Km 15, Modulo 31
CEP - 05112-000 So Paulo
BRASIL
Tel: 55-11-3622 4860 / 4863 / 4970
Fax : 55-11-3621 9117
TUBACEX MIDDLE EAST

Dubai Airport Free Zone Area
Building 6EA (East Wing-Block A)
Office 217
P.O. Box: 293692
Dubai - United Arab Emirates
Tel: +971 4 701 72 12
Fax : +971 4 701 72 13
TUBACEX CIS
Post box 186

OvchinnikovskayaNaberezhnaya 22,
stroyenie 1
115035 MOSC
RUSIA
Tel: + 7 916 644 22 51
Fax: +7 495 959 21 80

Tta 7

Uploaded by

Copyright:

Available Formats

Tta 7

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tta 7

Uploaded by

Copyright:

Available Formats

Seamless carbon,

alloy and stainless steel

Tubacex Taylor Accesorios, is an independent

These Companies, among others, have already

SEAMLESS STAINLESS STEEL

16-18 (16,5-18,5) 2,0-3,0 (2,0-2,5)

WP 316H Nb ASTM A 213

NiCr 22Mo 9Nb

Superduplex ASTM A 815

Duplex 25Cr ASTM A 815

Duplex 22Cr ASTM A 815

ROXIMATE CHEMICAL COMPOSITION RANGE

5(C + N) < Ti < 0,70

(Short Radius and Long Radius)

NOTE: OUR RANGE IN SR STARTS FROM 2.

The Manufacturing Processes

Facilities for the Manufacturing

Sale Offices around the World

TUBACEX EUROPE, B.V.

TUBACEX CANADA INC.

TUBACEX MIDDLE EAST

Post box 186

You might also like